Investigating the Effect of Poly (D L-Lactic Acid) Molecular Weight on the Shape Memory Parameters: A Molecular Dynamics Study
Subject Areas :Mohammad Amini 1 , Abbas Montazeri 2
1 - MSc. in Materials Science and Engineering, K. N. Toosi University of Technology, Tehran, Iran.
2 - Associate Professor, Faculty of Materials Science and Engineering, K. N. Toosi University of Technology, Tehran, Iran.
Keywords: Molecular dynamics simulation, Molecular weight, Glass transition temperature, Polylactic Acid, Shape Memory Property,
Abstract :
Shape memory polymers are a subset of smart materials that can regain their original shape after a temporary deformation. In recent years, these polymers have been vastly utilized in many industries (especially biomedical). The main purpose of this study was to find the influence of the polymer molecular weight on the various shape memory parameters. Additionally, the mechanisms governing the shape memory behavior of polymers are thoroughly studied. Calculating the glass transition temperature and exploring its role on the shape memory behavior of polymeric materials are the other objectives of the current research. In this study, all models were built via Materials Studio and all the simulations were carried out using LAMMPS software. Based on the obtained results, the glass transition temperature of polymer increases with increasing the degree of polymerization. The attempts made to achieve an optimal microstructure revealed that the shape fixity parameter increases from 90% to 94% with increasing the molecular weight from 36000 g/mol to 108000 g/mol. In contrast to the shape fixity, the shape recovery parameter follows a descending trend with increasing the molecular weight. This is attributed to an increase in the ratio of the fixed phase to its reversible counterpart.
[1] H. Meng & G. Li, "A review of stimuli-responsive shape memory polymer composites", Polymer, vol. 54, no. 9, pp. 2199-2221, 2013.
[2] W. Nie, C. Peng, X. Zhou, L. Chen, W. Wang, Y. Zhang, ... & C. He, "Three-dimensional porous scaffold by self-assembly of reduced graphene oxide and nano-hydroxyapatite composites for bone tissue engineering", Carbon, vol. 116, pp. 325-337, 2017.
[3] M. Amini & S. Wu, "Designing a polymer blend nanocomposite with triple shape memory effects", Composites Communications, vol. 23, pp. 100564, 2021.
[4] A. P. Gupta & V. Kumar, "New emerging trends in synthetic biodegradable polymers–Polylactide: A critique", European Polymer Journal, vol. 43, no. 10, pp. 4053-4074. 2007.
[5] Y. Saito, T. Tanaka, A. Andoh, H. Minematsu, K. Hata, T. Tsujikawa, ... & Y. Fujiyama, "Novel biodegradable stents for benign esophageal strictures following endoscopic submucosal dissection", Digestive Diseases and Sciences, vol. 53, no. 2, pp. 330-333, 2008.
[6] M. Amini, S. Kalantari & A. Khavandi, "Analysis of tensile failure mode and the mechanism dominated over polymer composite degradation", Journal of Science and Technology of Composites, vol. 6, no. 4, pp. 601-608, 2020.
[7] M. Amini & A. Khavandi, "Evaluation of the water absorption content effect on the dielectric properties and tensile strength of polymer composites", Journal of Science and Technology of Composites, vol. 6, no. 2, pp. 300-309, 2019.
[8] M. Amini & A. Khavandi, "Evaluation of the electrical properties and mechanical behavior of insulator’s composite core in harsh environments", Materials Research Express, vol. 5, no. 11, pp. 115306, 2018.
[9] S. H. Söntjens, T. A. Engels, T. H. Smit & L. E. Govaert, "Time-dependent failure of amorphous poly-d, l-lactide: Influence of molecular weight", Journal of the Mechanical Behavior of Biomedical Materials, vol. 13, pp. 69-77, 2012.
[10] X. L. Lu, W. Cai, Z. Gao & W. J. Tang, "Shape memory effects of poly (L-lactide) and its copolymer with poly (ε-caprolactone)", Polymer Bulletin, vol. 58, no. 2, pp. 381-391, 2007.
[11] Y. Liu, K. Gall, M. L. Dunn, A. R. Greenberg & J. Diani, "Thermomechanics of shape memory polymers: uniaxial experiments and constitutive modeling", International Journal of Plasticity, vol. 22, no. 2, pp. 279-313, 2006.
[12] T. D. Nguyen, H. J. Qi, F. Castro & K. N. Long, "A thermoviscoelastic model for amorphous shape memory polymers: incorporating structural and stress relaxation", Journal of the Mechanics and Physics of Solids, vol. 56, no. 9, pp. 2792-2814, 2008.
[13] Y. H. Wang, W. H. Wang, Z. Zhang, L. Xu & P. Li, "Study of the glass transition temperature and the mechanical properties of PET/modified silica nanocomposite by molecular dynamics simulation", European Polymer Journal, vol. 75, pp. 36-45, 2016.
[14] J. Diani & K. Gall, "Molecular dynamics simulations of the shape-memory behaviour of polyisoprene", Smart Materials and Structures, vol. 16, no. 5, pp. 1575, 2007.
[15] E. Ghobadi, M. Heuchel, K. Kratz & A. Lendlein, "Influence of the addition of water to amorphous switching domains on the simulated shape-memory properties of poly (L-lactide)", Polymer, vol. 54, no. 16, pp. 4204-4211, 2013.
[16] J. Moon, J. Choi & M. Cho, "Programmed shape-dependence of shape memory effect of oriented polystyrene: A molecular dynamics study", Polymer, vol. 102, pp. 1-9, 2016.
[17] S. Shi, Q. Liu, T. Xu & M. Oeser, "Study on the effect of transition temperature on shape memory behavior in polyurethane based on molecular dynamics simulation", Materials Research Express, vol. 6, no. 11, pp. 115323, 2019.
[18] A. Ben Abdallah, F. Gamaoun, A. Kallel & A. Tcharkhtchi, "Molecular weight influence on shape memory effect of shape memory polymer blend (poly (caprolactone)/ styrene-butadiene-styrene)", Journal of Applied Polymer Science, vol. 138, no. 5, pp. 49761, 2021.
[19] D. T. Semiromi & A. R. Azimian, "Molecular dynamics simulation of nonodroplets with the modified Lennard-Jones potential function", Heat and mass transfer, vol. 47, no. 5, pp. 579-588, 2011.
[20] D. Toghraie Semiromi & A. R. Azimian, "Nanoscale Poiseuille flow and effects of modified Lennard–Jones potential function", Heat and mass transfer, vol. 46, no. 7, pp. 791-801, 2010.
[21] D. Toghraie Semironi & A. R. Azimian, "Molecular dynamics simulation of liquid–vapor phase equilibrium by using the modified Lennard-Jones potential function", Heat and mass transfer, vol. 46, no. 3, pp. 287-294, 2010.
[22] M. Tohidi & D. Toghraie, "The effect of geometrical parameters, roughness and the number of nanoparticles on the self-diffusion coefficient in Couette flow in a nanochannel by using of molecular dynamics simulation", Physica B: Condensed Matter, vol. 518, pp. 20-32, 2017.
[23] P. Alipour, D. Toghraie, A. Karimipour & M. Hajian, "Modeling different structures in perturbed Poiseuille flow in a nanochannel by using of molecular dynamics simulation: Study the equilibrium", Physica A: Statistical Mechanics and its Applications, vol. 515, pp. 13-30, 2019.
[24] M. Tahmasebipour, R. Ahmadi M. Modarres, "Analysis of thermo-mechanical behavior of gold nanowire by using molecular dynamics method", in Persian, New Process in Material Engineering, vol. 13, no. 1, pp. 91-101, 2019.
[25] S. Plimpton, "Fast parallel algorithms for short-range molecular dynamics", Journal of Computational Physics, vol. 117, no. 1, pp. 1-19, 1995.
[26] Biovia DS. Materials Studio. R2 (Dassault Systèmes BIOVIA, San Diego); 2017.
[27] M. Amini, K. Hasheminejad & A. Montazeri, "Experimentally guided MD simulation to enhance the shape memory behavior of polymer-based nanocomposites: Towards elaborating the underlying mechanism", Composites Part A: Applied Science and Manufacturing, vol. 138, pp. 106055, 2020.
[28] S. Farah, D. G. Anderson & R. Langer, "Physical and mechanical properties of PLA, and
their functions in widespread applications–A comprehensive review", Advanced drug delivery reviews, vol. 107, pp. 367–92, 2016.
[29] H. Lian, W. Chang, Q. Liang, C. Hu, R. Wang, L. Zu & Y. Liu, "A shape memory polyurethane based ionic polymer–carbon nanotube composite", RSC advances, vol. 7, no. 73, pp. 46221-46228, 2017.
[30] C. Likitaporn, P. Mora, S. Tiptipakorn & S. Rimdusit, "Recovery stress enhancement in shape memory composites from silicon carbide whisker–filled benzoxazine-epoxy polymer alloy", Journal of Intelligent Material Systems and Structures, vol. 29, no. 3, pp. 388-396, 2018.
[31] N. Mirtschin & T. Pretsch, "Programming of one-and two-step stress recovery in a poly (ester urethane)", Polymers, vol. 9, no. 3, pp. 98, 2017.
[32] D. Hossain, M. A. Tschopp, D. K. Ward, J. L. Bouvard, P. Wang & M. F. Horstemeyer, "Molecular dynamics simulations of deformation mechanisms of amorphous polyethylene", Polymer, vol. 51, no. 25, pp. 6071-6083, 2010.
[33] S. Farah, D. G. Anderson & R. Langer, "Physical and mechanical properties of PLA, and their functions in widespread applications—A comprehensive review", Advanced drug delivery reviews, vol. 107, pp. 367-392, 2016.
[34] K. Hasheminejad & A. Montazeri, "Enhanced interfacial characteristics in PLA/graphene composites through numerically-designed interface treatment", Applied Surface Science, vol. 502, pp. 144150, 2020.
[35] M. Amini & A. Khavandi, "Synergistic effects of mechanical and environmental loading in stress corrosion cracking of glass/polymer composites", Journal of Composite Materials, vol. 53, no. 24, pp. 3433-3444, 2019.
[36] M. Amini & A. Khavandi, "Degradation of polymer-based composites in corrosive media: experimental attempts towards underlying mechanisms", Mechanics of Time-Dependent Materials, vol. 23, no. 2, pp. 153-172, 2019.
[37] R. H. Gee, N. Lacevic & L. E. Fried, "Atomistic simulations of spinodal phase separation preceding polymer crystallization", Nature Materials, vol. 5, no. 1, pp. 39-43, 2006.
[38] T. G. Fox Jr & P. J. Flory, "Second‐order transition temperatures and related properties of polystyrene. I. Influence of molecular weight", Journal of Applied Physics, vol. 21, no. 6, pp. 581-591, 1950.
[39] X. J. Zhang, Q. S. Yang, X. Liu, J. J. Shang & J. S. Leng, "Atomistic investigation of the shape-memory effect of amorphous poly (L-lactide) with different molecular weights", Smart Materials and Structures, vol. 29, no. 1, pp. 015040, 2019.
_||_