Subject Areas :

مصطفی قراخانی بنی ¹ , ناصر احسانی ² , مجتبی اسماعیلی ³ , یوسف صفایی نائینی ⁴

1 - کارشناس ارشد، مهندسی مواد، دانشگاه صنعتی مالک اشتر، تهران
2 - عضو هیأت علمی گروه مواد، دانشگاه صنعتی مالک اشتر، تهران
3 - کارشناس ارشد، مهندسی مواد، دانشگاه صنعتی شریف، تهران
4 - کارشناس ارشد، مهندسی مواد، دانشگاه علم و صنعت ایران، تهران

Received: 2015-09-15 Accepted : 2015-09-15 Published : 2015-08-23

Keywords:

References:

[1]      J. E. Sheehan, K. W. Buesking&  B. J. Sullivan, “Carbon–carbon composites”, Annual Review of Material Science, Vol. 24, pp. 19–44, 1994.

 [2]      M. E. Westwood, J. D. Webster, R. J. Day, F. H. Hayes & R. Taylor, “Oxidation protection for carbon fiber composites”, journal of Materials Science, Vol. 31, pp. 1389–1397, 1996.

 [3]      L. F. Cheng, Y. D. Xu, L. T. Zhang & R. Gao, “Effect of glass sealing on the oxidation behavior of three dimensional C/SiC composites in air”, Carbon, Vol. 39, pp. 1127–1133, 2001.

 [4]      T. Ogasawara, T. Ishikawa, H. Ito & N. Watanabe, “Multiple cracking and tensile behavior for an orthogonal 3-D woven Si–Ti–C–O fiber/Si–Ti–C–O matrix composite”, J. Am. Ceram. Soc, Vol. 84 No. 7, pp. 1565–1574, 2001.

 [5]      M. Suzuki, Y. Tanaka, Y. Inoue, N. Miyamoto, M. Sato & K. Goda, “Uniformization of boron nitride coating thickness by continuous chemical vapor deposition process for interphase of SiC/SiC composites”, Jpn. J. Ceram. Soc, Vol. 111, No. 12, pp. 865–871, 2003.

 [6]      X. B. He & H. Yang, “Preparation of SiC fiber-reinforced SiC composites”, J. Mater. Process. Technol, Vol. 159, pp.135–138, 2005.

 [7]      S. M. Dong, Y. Katoh & A. Kohyama, “Preparation of SiC/SiC composites by hot pressing, using Tyranno-SA fiber as reinforcement”, J. Am. Ceram. Soc, Vol. 86, No. 1, pp. 26–32, 2003.

 [8]      S. M. Dong, Y. Katoh & A. Kohyama, “Processing optimization and mechanical evaluation of hot pressed 2D Tyranno-SA/SiC composites”, J. Eur.Ceram. Soc, Vol. 23, pp. 1223–1231, 2003.

 [9]      T. Taguchi, N. Igawa, R. Yamada & S. Jitsukawa, “Effect of thick SiC interphase layers on microstructure, mechanical and thermal properties of reaction-bonded SiC/SiC composites”, J. Phys. Chem. Solids, Vol. 66, pp. 576–580, 2005.

 [10]       Y. D. Xu, L. F. Cheng, L. T. Zhang, X. W. Yin & H. F. Yin, “High performance 3D textile Hi-Nicalon SiC/SiC composites by chemical vapor infiltration”, Ceram. Int, Vol. 27, pp. 565–570, 2001.

 [11]       Z. S. Rak, “A process for C_f/SiC composites using liquid polymer infiltration”, J. Am. Ceram. Soc, Vol. 84, No. 10, pp. 2235–2239, 2001.

 [12]      K. K. Chawla, “Ceramic Matrix Composites”, Chapman & Hall, pp. 1-10, 1993.

 [13]      R. Yao, Z. Feng, Y. Yu , S. Li, L. Chen & Y. Zhang, “Synthesis and characterization of continuous freestanding silicon carbide films with polycarbosilane (PCS)”, Journal of the European Ceramic Society, Vol. 29, pp. 2079–2085, 2009.

 [14]      G. Savage, “Carbon/Carbon Composites”, Chapman & Hall, pp. 31-36, 1993.

 [15]      ASTM C 1341-97, “Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites”, Developed by subcommittee: C28.07, Annual Book of ASTM Standards Vol. 30, 1997.