Investigation of the Size Effect in Compression Test by Combined Hill-Taylor Theory

Subject Areas :

Faraz Rahimzadeh Lotfabad ¹ ( M. Sc. Student, Department of Materials Science and Engineering-Metal Forming, Shiraz University, Shiraz, Iran. )
Ramin Ebrahimi ² ( Professor, Department of Materials Science and Engineering, Shiraz University, Shiraz, Iran. )

Received: 2020-07-15 Accepted : 2020-10-21 Published : 2021-06-22

Keywords: Size effect, Microforming, Taylor Model, Crystal Plasticity,

Abstract :

In this paper, first the crystal plasticity notions developed by Taylor are combined with the mathematical form of Hill’s yield criterion for the anisotropic materials and a novel model is developed for description of mechanical response of grains in a specimen, based on their orientation. The advantage of the proposed model compared to other crystal plasticity finite element techniques is that in the conventional crystal plasticity codes, the deformation taken to be consisted of slip on all slip systems which is not valid assumption, yet here, the deformation taken to be consisted of slip on 5 slip systems. Using the proposed model which is called combined Hill-Taylor model, compression test of specimens with different number of grains are simulated and the state of strain in each grain and the condition for elimination of size effect in the final geometry of specimen is studied. The results suggest that the state of strain in each grain is individual and depends on the orientation of that gain which changes abruptly by passing through the grain boundaries. It is also observed that as the number of grains increases, the final geometry approaches to the expected ideal geometry. This trend is studied in statistical point of view and it became clear that as the number of grains increases the average of the state of strain approaches the ideal condition while the scatter in the state of strain in grains continue to maintain.

References:

[1]    U. Engel & R. Eckstein, "Microforming—from basic research to its realization", Journal of Materials Processing Technology, vol. 125-126, pp. 35-44, 2002.

 

[2]    E. Egerer & U. Engel, "Process Characterization and Material Flow in Microforming at Elevated Temperatures", Journal of Manufacturing Processes, vol. 6, no. 1, pp. 1–6, 2004.

 

[3]    A. Rosochowski, W. Presz, L. Olejnik & M. Richert, "Micro-extrusion of ultra-fine grained aluminium", The International Journal of Advanced Manufacturing Technology, vol. 33, no. 1–2, pp. 137–146, 2007.

 

[4]    ‌J. Xu, C. Wang, D. Shan, B. Guo & T. G. Langdon, "Micro-deformation behavior in micro-compression with high-purity aluminum processed by ECAP", Manufacturing Review, vol. 2 no. 1, 2015.

 

[5]    B. Eichenhueller, E. Egerer & U. Engel, "Microforming at elevated temperature - forming and material behavior", The International Journal of Advanced Manufacturing Technology, vol. 33, no. 1–2, pp. 119–124, 2006.

 

[6]    M. Geiger, F. Vollertsen & R. Kals, "Fundamentals on the Manufacturing of Sheet Metal Microparts", CIRP Annals, vol. 45, no. 1, pp. 277–282, 1996.

 

[7]    G. I. Taylor, "Plastic Strain in Metals", The Journal of the Institute of Metals, vol. 62, pp. 307–324, 1938.

 

[8]    G. I. Taylor, "Analysis of Plastic Strain in a Cubic Crystal", In Timoshenko 60th birthday anniversary. New York: Macmillan, 1938.

 

[9]    G. I. Taylor & C. F. Elam, "Bakerian Lecture: The Distortion of an Aluminum Crystal during a Tensile Test", Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 102, no. 719, pp. 643–667, 1923.

 

[10] J. Q. Ran, M. W. Fu & W. L. Chan, "The influence of size effect on the ductile fracture in micro-scaled plastic deformation", International Journal of Plasticity, vol. 41, pp. 65–81, 2013.

 

[11] W. T. Li, M. W. Fu & S. Q. Shi, "Study of deformation and ductile fracture behaviors in micro-scale deformation using a combined surface layer and grain boundary strengthening model", International Journal of Mechanical Sciences, vol. 131–132, pp. 924–937, 2017.

 

[12] W. T. Li, H. Li M. W. Fu, "Interactive effect of stress state and grain size on fracture behaviors of copper in micro-scaled plastic deformation", International Journal of Plasticity, vol. 114, pp. 126–143, 2019.

 

[13] C. Wang, H. Wang, G. Chen, Q. Zhu, L. Cui,  P. Zhang & A. Dong, "New Constitutive Model for the Size Effect on Flow Stress Based on the Energy Conservation Law", Materials, vol. 13, no. 11, pp. 2617-2630, 2020.

 

[14] M. Henning & H. Vehoff, "Local mechanical behavior and slip band formation within grains of thin sheets", Acta Materialia, vol. 53, no. 5, pp. 1285–1292, 2005.

 

[15] M. Henning & H. Vehoff, "Statistical size effects based on grain size and texture in thin sheets", Materials Science and Engineering: A, vol. 452-453, pp. 602–613, 2007.

 

[16] F. Foster, P. Eisenlohr, L. Hantcherli, D. D. Tjahjanto, T.R. Bieler & D. Raabe, "Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications", Acta Materialia, vol. 58, pp. 1152-1211, 2010.

 

[17] H. Farooq, G. Cailletaud, S. Forest & D. Ryckelynck, "Crystal plasticity modeling of the cyclic behavior of polycrystalline aggregates under non-symmetric uniaxial loading: Global and local analyses", International Journal of Plasticity, vol. 126, pp. 102619-102659, 2020.

 

[18] R. Hill, "A theory of the yielding and plastic flow of anisotropic metals", Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, vol. 193, no. 1033, pp. 281–297, 1948.

 

[19] R. Hill, "The mathematical theory of plasticity". Oxford: Clarendon Press, 1950.

 

[20] F. Rahimzadeh Lotfabad, "Analytical, Experimental and Finite Element Study of Size Effect in Microfoming of Prismatic Pieces with Triangular Basis", M.S. Thesis, Shiraz University, 2019.

 

[21] J. Xu, X. Zhu, D. Shan, B. Guo & T. G. Langdon "Effect of grain size and specimen dimensions on micro-forming of high purity aluminum", Materials Science and Engineering: A, vol. 646, pp. 207–217, 2015.

 

[22] ‌ D. Raabe, M. Sachtleber, Z. Zhao, F. Roters & S. Zaefferer "Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation", Acta Materialia, vol. 49, no. 17, 3433–3441, 2001.

 

[23]  J. H. Deng, M. W. Fu & W. L. Chan, "Size effect on material surface deformation behavior in micro-forming process", Materials Science and Engineering: A, vol. 528, no. 13–14, pp. 4799–4806, 2011.