Subject Areas :

اکرم صالحی ¹ , ابوالفضل باباخانی ² , سید مجتبی زبرجد ³

1 - کارشناس ارشد مهندسی مواد و عضو گروه پژوهشی مواد جهاد دانشگاهی مشهد
2 - دانشیار، گروه مهندسی مواد، دانشگاه فردوسی مشهد، دانشکده مهندسی، مشهد
3 - استاد، گروه مهندسی مواد، دانشگاه شیراز، دانشکده مهندسی، شیراز

Received: 2013-10-02 Accepted : 2014-01-04 Published : 2015-05-22

Keywords:

References:

[1]    م. گلستانی پور، م. توکلی و س. م. زبرجد، "بررسی جذب انرژی پنل های ساندویچی با هسته فوم آلومینیوم تحت آزمون سوراخ کاری"، مجله مواد نوین، جلد 3، ص 38-25، 1391.

 

[2]  J. Banhart, “Metal Foams: Production and Stability”, Advanced Engineering Materials, Vol. 8, No. 9, pp. 781–794, 2006.

 

[3]  P. Kenesei, Cs. Kadar, Zs. Rajkovits & J. Lendvai, “The influence of cell-size distribution on the plastic deformation in metal foams”, Scripta Materialia, Vol. 50, pp. 295–300, 2004.

 

[4]  G. Kavei & K. Ahmadi, “Processing aluminum foams using NaCl powder with controlled particle size and studying the microstructural and mechanical properties of the foams”, Special Topics & Reviews in Porous Media — An International Journal, Vol. 1, No. 4, pp. 337–344, 2010.

 

[5]  J. Shena, G. Lu & D. Ruan, “Compressive behaviour of closed-cell aluminium foams at high strain rates”, Composites, Part B, Vol. 41, pp. 678–685, 2010.

 

[6]  J. Banhart, “Manufacture, characterisation and application of cellular metals and metal foams”, Progress in Materials Science, Vol. 46, pp. 559–632, 2001.

 

[7]  V. C. Srivastava & K. L. Sahoo, “Processing, stabilization and applications of metallic foams. Art of science”, Materials Science-Poland, Vol. 25, pp. 733-753, 2007.

 

[8]  B. Y. Hur, S. J. Park, K. H. Song, W. H. Lee, S. H. Park & S. Y. Kim, “Foaming characterization reological, thermal mechanical properties of Al alloy foam”, International Conference: ADVANCED METALLIC MATERIALS, Smolenice, Slovakia, 2003.

 

[9]  W. Jiejun, L. Chenggong & Wang Dianbin, “Damping and sound absorption properties of particle reinforced Al matrix composite foams”, Composites Science and Technology, Vol. 63, pp. 569–574, 2003.

 

[10]  Jeon & T. Asahina, “The effect of structural defects on the compressive behavior of closed-cell Al foam”, Acta Materialia, Vol. 53, pp. 3415–3423, 2005.

 

[11]  X.F. Tao & Y.Y. Zhao, “Compressive behavior of Al matrix syntactic foams toughened with Al particles”, Scripta Materialia, Vol. 61, pp. 461–464, 2009.

 

[12]  K. M. Mussert, W.P. Vellinga & A. Bakker, “A nano-indentation study on the mechanical behaviour of the matrix material in an AA6061-Al₂O₃ MMC”, Journal of Materials Science, Vol. 37, pp. 789-794, 2002.

 

[13]  Y. Yang, J. Lan & X. Li, “Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy”, Materials Science and Engineering, Vol. 380, pp. 378-383, 2004.

 

[14]  S. M. C. Torres, “Generation of heterogeneous cellular structures by sonication”, ph. D. Thesis, University of Heriot-Watt, United Kingdom, 2008.

 

[15]  J. Hashim, L. Looney & M.S.J. Hashmi, “The wettability of SiC particles by molten aluminium alloy”, Journal of Materials Processing Technology, Vol. 119, pp. 324–328, 2001.

 

[16]  K. S. Suslick, “The chemical and physical effects of ultrasound”, Scientific American, pp. 80-86, 1989.

 

[17]  J. Wang, Z. He, J. Wu & Z. Wan, “Effect of ultrasonic wave on melt foaming process of aluminum foam”, Advanced Materials Research, Vol. 97-101, pp. 227-230, 2010.

 

[18]  X. Li, Y. Yang & X. Cheng, “Ultrasonic-assisted fabrication of metal matrix nanocomposites”, Materials Science, Vol. 39, pp. 3211-3212, 2004.

 

[19]  K. S. Suslick, Y. Didenko & M. Fang, “Acoustic cavitation and its chemical consequences”, Phil. Trans. R. Soc. Lond. A, Vol. 357, pp. 335-353, 1999.

 

[20]  M. F. Ashby, A. G. Evans & N. A. Fleck, “Metal Foams: A Design Guide”, Butterworth-Heinemann, United States of America, 2000.

 

[21]  P. Pinto, N. Peixinho, F. Silva & D. Soares, “Compressive properties and energy absorption of aluminum foams with modified cellular geometry”, Journal of Materials Processing Technology, Vol. 214, pp. 571-577, 2014.

 

[22]  L. Filice, F. Gagliardi & D. Umbrello, “Simulation of aluminum foam behavior in compression tests”, The Arabian Journal for Science and Engineering, Vol. 34, pp. 129-137, 2009.

 

[23]  K. Kadoi, N. Babcsan & H. Nakae, “Heat Treatment of TiH2 Powder to Control Decomposition Phenomenon for Aluminum Foam Fabrication by Melt Route”, Materials Transactions, Vol. 50, pp. 727-733, 2009.

 

[24]  B. Matijasevic-Lux, J. Banhart, S. Fiechter, O. Gorke & N. Wanderka, “Modification of titanium hydride for Improved aluminum foam manufacture”, Acta Materialia, Vol. 54, pp. 1887-1900, 2006.

 

[25]  E. Koza, M. Leonowicz, S. Wojciechowski & F. Simancik, “Compressive strength of aluminium foams”, Materials Letters, Vol. 58, pp. 132–135, 2004.

 

[26]     م. ملک جعفریان، س. خ. ا. صدر نژاد، م. گلستانی پور و م. ص. ابروی، ” بررسی خواص فشاری فوم آلومینیومی سلول بسته“، چهارمین همایش مشترک انجمن مهندسین متالورژی و جامعه علمی ریخته گری ایران، 1389.

 

[27]  U. Ramamurty & A. Paul, “Variability in mechanical properties of a metal foam”, Acta Materialia, Vol. 52X, pp. 869-876, 2003.

 

[28]  C. Koerner, “Integral Foam Molding of Light Metals”, Springer-Verlag Berlin Heidelberg, Germany, 2008.

 

[29]  T. Hamada, H. Kanahashi, T. Miyoshi & N Kanetake, “Effects of the Strain Rate and Alloying on the Compression Characteristics of Closed Cell Aluminum Foams”, Materials Transactions, Vol. 50, pp. 1418-1425, 2009.

 

D. P. Mondal, N. Jha, B. Gull, S.Das & A. Badkul, “Microarchitecture and compressive deformation behavior of Al-alloy (LM13)–cenosphere hybrid Al-foam prepared using CaCO3 as foaming agent”, Materials Science & Engineering A, Vol. 560, pp. 601–610, 2013.