Effect of aging heat treatment on the microstructure, mechanical properties and corrosion resistance of Inconel 718 nickel based superalloy

Subject Areas :

Ali Mortezaie ¹ , Morteza Shamanian ²

1 - دانشجوی کارشناسی ارشد، دانشکده مهندسی مواد، واحد نجف آباد، دانشگاه آزاد اسلامی، نجف آباد
2 - استاد، دانشکده مهندسی مواد، دانشگاه صنعتی اصفهان، اصفهان

Received: 2016-04-03 Accepted : 2016-04-03 Published : 2017-02-19

Keywords:

References:

[1]     M. Pouranvari, A. Ekrami & A. H. Kokabi, “Transient liquid phase bonding of wrought IN718 nickel based superalloy using standard heat treatment cycles: Microstructure and mechanical properties”, Materials and Design, Vol. 5, pp. 694-701, 2013.

 

[2]     S. H. Chang, “In situ TEM observation of γ´,γ″and δ precipitations on Inconel 7 8 superalloythrough HIP treatment”, Journal of Alloys and Compounds, Vol. 486, pp. 716-721, 2009.

 

[3]     M. J. Donachie & S. J. Donachie, “Superalloys a technical guide”, 2nd edition, ASM international, 2002.

 

[4]     S. Kou, Welding metallurgy, second ed. Hoboken, John Wiley & Sons Inc, 2003.

 

[5]     M. Durand, “The microstructure of superalloys”, Gordon and Breach, Amsterdam, 1997.

 

[6]     J. N. Dupont, J. C. Lippold&  S. D. Kiser, “Welding metallurgy and weldability of nickel-base alloys”, John Wiley, 2009.

 

[7]     C. M. Kuo, Y. T. Yang, H. Y. Bor, C. N. Wei&  C. C. Tai, “Aging effects on the microstructure and creep behavior of Inconel 7 8 superalloy”, Materials Scince and Engineering A, Vol. 510-511, pp. 289-294, 2008.

 

[8]     D. E. Nelson & E. A. Baeslack, “Morphology of weld heat-affected zone liquation in cast Alloy 718”, Scripta Materialia, Vol. 9, pp. 37 -379, 1986.

 

[9]     R. Vincent,“ Precipitation around welds in the nickel-base superalloy Inconel 718”, Acta Metallurgica, Vol. 33, pp. 2 5-1216, 1985.

 

[10] S. Azadian, L. Y. Wei & R. Warren, “Delta phase precipitation in Inconel 7 8”, Materials Characterization, Vol. 53, pp. 7-16, 2004.

 

[11] H. Naffakh, M. R, Aboutalebia, S. H. Seyedeina & C. Mapellib, “Microstructural, mechanical and weldability assessments of the dissimilar welds between γʹ-and γ″-strengthened nickel-base superalloys”, Materials Characterization, Vol. 82, pp. 41-49, 2013.

 

[12]    ف. گلستانی فرد، م. بهره ور و ا. صلاحی،" روش های شناسایی و آنالیز مواد"، دانشگاه علم و صنعت ایران، چاپ چهارم، ١٣٨٩.

 

[13] C. Dayong Cai, Z. Weihong, N. Pulin, L. Wenchang & Y. Mei, “Dissolution kinetics of δ phase and its influence on the notch sensitivity of Inconel 718”, Materials Characterization, Vol. 58, pp. 220-225, 2007.

 

[14]    ع. سجادی، "رفتار مکانیکی مواد"، انتشارات دانشگاه فردوسی مشهد، ١٣٨٤.

 

[15] N. G. Thompson & J. H. Payer, “DC electrochemical test methods. Natl Assn of Corrosion”, 1998.

 

[16] C. Huang, T. H. Wang, W. C. Han & Lee CH,” A study of the galvanic corrosion behavior of Inconel 718 after electron beam welding”, Materials Chemistry and Physic, Vol. 104, pp. 293-300, 2007.

 

ا. تایت و آ. فتاح حسینی (مترجم)، "مقدمه ای بر روش های الکتروشیمیایی خوردگی"، انتشارات دانشگاه بوعلی سینا، ١٣٩٠.