List of Articles Friction

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - A novel analytical Solution of Turbulent Boundary Layer Flow at high range of Reynolds No. Over a Flat Plate with absence pressure gradient.
  mohammad hosein kaffash Davood Domiri Ganji Mohammad hassan Nobakhti
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Estimating Price Delays on Tehran Stock Exchange
  Ali Ebrahim Nejad Mahdi Pedram Rad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Identifying Banking Crisis Using Banking Stress Index in Iranian Economy (Dynamic Factor Model)
  samineh ghasemifar Abolfazl Shahabadi shamsollah shirinbakhsh mirhosien mousavi azam ahmadian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - The role of monetary variables and financial frictions on the stock market in the form of DSGE model
  Lleila Barati yazdan goodarzi
  10.30495/jfksa.2022.21085
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Laboratory Study of The Effect of V-shaped Structure on Changes in Fishway Roughness
  maryam shahabi Javad Ahdiyan Marjan Narimousa Mehdi Ghomeshi Hossein Azizi Nadian
  10.30495/wsrcj.2022.64329.11268
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Determination of Some Physical Properties of Pistachio Nut and Its Kernel (Qazvini Varieties)
  mohammad gholami porshokohi milad mohammadi shamami shahram mohseni ali mashallah kermani ehsan abdolalizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Determination and Investigation of Some Physical and Mechanical Properties of Almond (Rabi Variety)
  M. Salimi M. Gholami Sh. Mohseni E. Abdolalizade
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Evaluation of the effect of financial policies on Capital Market investment in financial friction
  Masood Aghaei Ali Najafi Moghadam SHADI Shahverdiani Roya Darabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Advanced Manufacturing Technology by Under Water Friction Stir Welding Technique
  M Sadeghi M Farahani H Sabet
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Effect of the FSW Tool Pin Profile on Mechanical Properties of the Al6061-Cu Plates Joint
  F. khalili K. Amini M. Golzar Shahri F. Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - The Effect of Travel and Rotational Speeds on the Mechanical Properties of Al2024 in Underwater Friction Stir Welding
  R. Azarafza A. Rabieifar A. Rezaei S. Nategh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Studies on the Microstructure Modification and Tribological Characteristics of Cast Al-Si Eutectic Alloys
  V Abouei Mehrizi O Bayati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - A Case Study of Three Different Brake Pads Used in Iranian Rail Systems
  A. Nasr M. H. Esnaashary
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Computational Evaluation of the Impact of Friction Coefficient on Self-Expanding Stent and Peripheral Artery During Contact
  F. Nematzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Simulation of Steel Sheets Cold Rolling in Sticky Friction Conditions to Reduction of Scrap and Tools Wear
  Arab N
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Metallurgical Investigation of Under Water Friction Stir Welding (UWFSW) Process
  M Sadeghi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints
  kamran amini Farhad Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Investigating the Tribological Behavior of Diesel-biodiesel Blends with Nanoparticle Additives under Short-term Tests
  Hossein Khorshidnia Alireza Shirneshan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Optimizing Friction Stir Welding Process for Enhancing Strength and Hardness using Taguchi Multi-Objective Function Method
  Sajjad Khaki Ali Heidari Amin Kolahdooz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Multi layered finite element analysis of graded coatings in frictional rolling contact
  R. Jahedi S. Adibnazari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - A New Rolling Pressure Model for An Actual Reversing Cold Rolling Strip Mill
  M. Heydari Vini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN)
  Mohammad Ali Ansari Reza Abdi Behnagh Dong Lin Sarang Kazeminia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Spot Welded of Titanium Alloy TiAl6V4
  Saeid Nader Masoud Kasiri- Asgarani kamran amini Morteza Shamanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Investigation of Mechanical Property and Microstructure of Nanocomposite AZ31/SiC Fabricated by Friction Stir Process
  ahmad haghani Sayed Hassan Nourbakhsh Mehdi Jahangiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Surface Characteristics Improvement of AZ31B Magnesium by Surface Compositing with Carbon Nano-tubes through Friction Stir Processing
  M. Soltani M. Shamanian B. Niroumand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - The Impact of Die Corner Radius and Friction Coefficient on Bulge Forming of T-Shaped Copper Tubes using Finite-Element Method and Experimental Analysis
  M. Ahmadpour Omid Ghahraei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Experimental Study and Modeling of Friction Stir Welding Process of Aluminum 1100 Alloys, using Artificial Neural Network with Taguchi Method
  V. Zakeri Mehrabad Ali Doniavi A. Gholipoor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite
  Moslem Paidar Mojtaba Jafarian Mohsen Salehi Mohammad Saeed Khakpash
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Optimal Design of Steppers in Single Step High Pressure Torsion (SIHPT) Process as a Novel SPD Method
  Mehdi Eskandarzadeh Ghader Faraji A. Masoumi Ali Kalaki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Experimental Study on Manufacturing of Tailor Friction Stir Welded Aluminium Blanks
  Farhad Teimouri Hamid Montazerolghaem Mahmoud Farzin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - A Novel Technique for Keyhole-Less Reinforced Friction Stir Spot Welding of Polyethylene Sheets
  Moosa Sajed S. M. Hossein Seyedkashi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Influence of Tool Offset Distance on Microstructure and Mechanical Properties of the Dissimilar AA2024–AA7075 Plates Joined by Friction Stir Welding
  Hossain Soleimany kamran amini Farhad Gharavi
  10.30495/admt.2021.1897512.1193
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Analysis of Material Flow and Phase Transformation in Friction Hydro-Pillar Processing of 1045 Steel
  Moosa Sajed S. M. Hossein Seyedkashi
  10.30495/admt.2020.1900258.1198
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Experimental Correlation Between Microstructure, Residual Stresses and Mechanical Properties of Friction Stir Welded 2024-T6 Aluminum Alloys
  Majid Farhang Mohammadreza Farahani Mohammad Nazari O. Sam Daliri
  10.30486/admt.2022.1943845.1322
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Experimental Study on the Effects of Friction Stir Spot Welding Process Parameters on AL2024T3 Joint Strength
  Majid Farhang Mohammadreza Farahani Moein Enami
  10.30495/admt.2021.1922979.1280
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Experimental Investigation on Process Parameters of Dissimilar Double-Layered Wire Produced by Modified Friction Stir Extrusion Process
  Masoud Yavari Nouri S. M. Hossein Seyedkashi Moosa Sajed
  10.30495/admt.2021.1911339.1220
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Numerical Simulation of Hot Forging Process of KIA Car Brake’s Output Shaft
  saeid Hashemian Peyman Mashhadi Keshtiban Abuzar Es'haghi Oskui
  10.30486/admt.2022.1933346.1290
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Effect of Inter-Cavity Spacing and Heat Treatment in Friction Stir Processing/Welding (FSP/FSW) Al7075 Composites Containing Al2O3 and Graphene Nanomaterials using Charpy Impact Test
  Ali Hosseinzadeh Mahmoud Shariati Danial Ghahremani-moghadam Mohammad Reza Maraki
  10.30486/admt.2022.1943233.1321
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Friction-Adaptive Integrated Position Control for Vehicles on Curved Paths
  Hadi Sazgar ali keymasi khalaji
  10.30486/ADMT.2024.873778
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Reliability-Based Robust Multi-Objective Optimization of Friction Stir Welding Lap Joint AA1100 Plates
  E Sarikhani A Khalkhali
  10.22034/jsm.2019.1877986.1493
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - A Modified Model to Determine Heat Generation in the Friction Stir Welding Process
  A Ghiasvand S Hasanifard M Zehsaz
  10.22034/jsm.2019.1867048.1429
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - New Method of Determination for Pressure and Shear Frictions in the Ring Rolling Process as Analytical Function
  M.R Zamani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - The effect of volume fraction and size of Al2O3 nanoparticle on heat transfer and flow characteristics in the heat exchanger with louvered strip inserts
  Meysam Pouyanian Ashkan Ghafouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Experimental Study of Interfacial Friction Factor and Shear Stress in Counter-current Two-phase Flow in a Vertical Pipe
  Arash Ghafouri Ashkan Ghafouri Abbas kosarineia Alireza Daneh-Dezfuli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Experimental study of friction factors of multi-walled carbon nanotubes/water flow inside helical double-pipe heat exchangers
  Farzad Fathian Seyed Ali Agha Mirjalily Mohammad Reza Salimpour Seyed Amir Abbas Oloomi
  10.30495/ijtnbm.2023.1974689.1016
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Entropy generation in a sample gas distribution network using steel and polyethylene pipes
  Ali Heydari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Design dynamic absorber to reduce vibrations of wing of a flyer object: Experimental & numerical investigation
  آرش نعیمی آبکناری محمدرضا صالحی برزگر mohammad mahdi Kheirikhah
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - The effect of rounds of the Friction Stir Welding tool (FSW) in determining of fatigue life of T6-7075 aluminum alloy
  Mohamad Jafar Ostad Ahmad Ghorabi Reza Samieifard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Behavior Study of Cemented Specimen by Biological Technique after Disturbance
  Mohammad Reza Asgari Mohammad Azadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Performance Evaluation of Viscoelastic and Friction Passive Damping System in Steel Structures
  Mohammad Taghi Kazemia Hosein Hoseini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Exploring the Efficiency of Dampers for Repair and Strengthening of Existing Buildings
  F. Barati A. Esfandiari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Effects of Glass Fiber Reinforced Polymer on Geotechnical Properties of Clayey Soil
  Fardin Asadollahi Rouzbeh Dabiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - FSP pass number and cooling effects on the microstructure and properties of AZ31
  Akbar Heidarpour Saeed Ahmadifard Nadia Rohania
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Tribological behavior of sputter-deposited MoSX/Ni coatings
  mehdi akbarzadeh morteza zanrahimi ehsan moradpor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - On the fabrication and characterization of Al5083/Al2O3 surface nanocomposite via friction stir processing
  Akbar Heidarpour Saeed Ahmadifard Shahb Kazemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Investigating the effect of tool dimension and rotational speed on microstructure of Al-B4C surface composite layer produced by friction stir processing (FSP)
  Mohammad Narimani Behnam Lotfi Zohreh Sadeghian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - CFD Modelling of Friction Stir Welding of Aluminum to Steel butt joint
  Hamed Aghajani Derazkola Majid Elyasi Morteza Hossienzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - The Effect of Friction Stir Processing Speed Ratio on the Microstructure and Mechanical Properties of A 430 Ferritic Stainless Steel
  Ali Salemi Golezani S. M Arab Sh. Javadi Firooz Kargar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - A study on the sub-structure and mechanical properties of friction stir processed AA 6061-T6 joints with ultra-fine grained structure
  Ali Salemi Golezani M. Esmaily N. Mortazavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Evaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method.
  Laleh Zahiri Moahammad saeri Shahram Alirezaee Alireza Afkhami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Size effect in equal channel angular pressing (ECAP) process
  M. Riazat Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Microstructure and Mechanical Properties of the Friction Welded Joint between X53CrMnNiN219 and X45CrSi93 Stainless Steel
  khalil gheisari Mohammad Reza Abasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Effects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts
  Mohsen Abbasi-Baharanchi Fathallah Karimzadeh Mohammad Hossein Enayati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Effect of N2 partial pressure on the structural and mechanical properties of TaN films
  mehdi manouchehrian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Friction Stir Welding of Al 2024 with Al 7075 Alloys and evaluate its structural and mechanical properties
  Sayedeh Zahra Anvari Saeed Rohani Mojarad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Study the effect of the friction stir process on the microstructure and mechanical behavior of the AZ31 as-cast alloy joint
  Amir Rezaee Iman Ebrahimzadeh Farhad Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Robust Multi-Objective Optimization of Mechanical Properties of Friction Stir Welding Using Neural Network and Modified-NSGA-II
  Mostafa Akbari Hossein Rahimi Asiabaraki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Thermo-Mechanical Analysis of Wire Drawing of Copper with PCD die: FEM Study
  Mohammad Soroush Merkani Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Bimetal friction stir welding of aluminum to magnesium
  P Pourahmad M Abbasi H.A Mehrabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - An Investigation Into the Effects of Friction and Anisotropy Coefficients and Work Hardening Exponent on Deep Drawing With FEM
  R Hosseini A Ebrahimi mamaghani A Asa
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Experimental Study of the Effect of Rotational Speed, Feed Rate, Lubricant and Tool Material in Friction Drilling of the Titanium Sheets
  Mehran Yazdani Nogarani Reza Nosouhi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Dissimilar Friction Stir Welding between Magnesium and Aluminum Alloys
  Mahdi Salari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW
  Ahmad Afsari Shahin Heidari Jaleel Jafari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Experimental Investigation of One-pass and Two-pass Friction Stir Welding Process of Aluminum Alloy 6061 with and without Copper Foil
  Qadarat Mohammad Jassim Al-Issawii Maziar Mahdipour Jalilian Mahdi Karami Khorramabadi
  10.71762/mpmp.2023.996847
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - The Effect of ECAP Die Helix Angle on the Microstructure Homogeneity of the Processed Samples by FEM Method
  Amir Neshastegir Kashi Farshid Ahmadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Enhanced Microstructure and Mechanical Properties of A216 Steel by Friction Stir Processing
  Gholamreza Khalaj Gholamreza Ghaffari Bahram Abdolmaleki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - Microstructural and Mechanical Characterization of Friction Stir Processed Aluminum Alloy 6061-T6 Reinforced with Zirconium-Silicate Particles
  Zohrheh Ebrahimi Moslem Sarikhani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Evaluation of the Cryogenic Effect on Friction Stir Processed AA7075/Si Matrix Nanocomposites
  Navid Molla Ramezani Behnam Davoodi
  10.71762/mpmp.2024.996927
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Manufacturing of Aluminum Thin Cylindrical Parts By Using Friction Stir Welding Method
  Ahmad Reza Sabet Hamid Montazerolghaem
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - Friction Stir Welding of Dissimilar Poly Methyl Methacrylate and Polycarbonate Sheets
  Mojtaba Rezaee Hajideh Omid Shapurgan Navid Molla Ramzani Essa Hasan Nejad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - The Effect of Chemical Composition on Wear and Microstructural Properties of Babbitt Coatings
  Zahra Moghadami Ali Mehdi Pour Omrani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - Simulation of Tool Rotation and Travelling Speed Effects on Friction Stir Welding of Ti-6Al-4V
  Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing
  Amin Rabiezadeh Ahmad Afsari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Effects of Tool Tilt Angle and Plunge Depth on Properties of Polycarbonate FSW Joint
  Hamidreza Mohammadi Kuhbanani Hesameddin Yasemi Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - A Hybrid Thermal Assisted Friction Stir Welding Approach for PMMA Sheets
  Mojtaba Rezaee Hajideh Mohammadreza Farahani Masoud Ahmad Khanbeigi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process
  Reza Nosouhi Saeed Behbahani Saeid Amini Mohammad Reza Khosrojerdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - Friction damper optimization based on parallel sensitivity analysis For self-centering concrete walls with gravity columns
  mohsen izadinia mahdi ravanbakhshian Hosein Tajmir Mohammadhasan Meisami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - Friction damper optimization based on parallel sensitivity analysis for self-centering concrete walls with gravity columns
  mahdi ravanbakhshian mohsen izadinia Hosein Tajmir Mohammadhasan Meisami
  10.30495/civil.2023.705697
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Offering a New Computational Relationship to Evaluate the Bearing Capacity of the Strip Footing on the Two Frictional -Cohesive Layered Ground
  Loghman Rahimi navid ganjian Mikaiel Youssefzadehfard Mehdi Derakhshandi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - Investigation of base shear in the steel structure with rotational friction damper influenced by the soil-structure interaction
  Alireza Lork SAEED ABACHI Ali Nikkhoo
  10.30495/civil.2022.697808
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - Influence of geometric functions of frictional pendulum isolator with variable curvature under near-field earthquake
  mahtab ferasat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - Application of Artificial Neural Networks (ANN) to Predict Geomechanical Properties of Asmari Limestones
  Mahdi Razifard Mashallah Khamechiyan ‪Mohammad Reza Amin‐Naseri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - Shear Strength in Terms of Coulomb C-Intercept
  Arya Assadi Langroudi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - اثر زبری سطح بر ضریب اصطکاک خشک فولاد - فولاد
  ح. چارستاد س.م خورسندی جو
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - Experimental Investigation of the Effect of Using Tools with Tapered Pins in Friction Stir Welding (FSW) of AA6061-T6 Aluminum Alloy
  Saleh Al Khatour Maziar Mahdipour Jalilian Mahdi Karami Khorramabadi
  10.71762/mpmp.2024.1056130
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - The effect of financial friction on the speed of stock price convergence
  Sepideh Rajizadeh Amirhossein Taebi Noghondari Hadis Zeinali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - PENALTY METHOD FOR UNILATERAL CONTACT PROBLEM WITH COULOMB’S FRICTION FOR LOCKING MATERIAL
  Salah Bourichi El Essoufi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - Effects of alumina nanoparticles, number of stirring pass and rotational speed on the mechanical behavior of friction stir welded (FSW) magnesium alloy (AM60)
  Arash Behzadineghad Abbas mohassel Hamid Omidvar Nader Setoudeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  99 - Investigation the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded AZ31 magnesium alloy
  AMIN ABDOLLAHZADEH Ali shokouhfar حمید امیدوار محمد علی صفرخانیان محمدرضا نادری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  100 - Comparison of Corrosion behavior of aluminium 6061 alloy joined by friction stir lap welding and gas tungsten arc lap welding methods
  reza bazarganlari ehsan vafa
• Open Access Article
  • Abstract Page
  • Full-Text
  
  101 - Similar and dissimilar 5754 and 6063 aluminum alloy joints by friction stir welding
  امین ربیعی زاده احمد افسری فرهاد ارغوانی فرناز احمدی کیسمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  102 - Evaluation of Microstructure and Mechanical Properties of Friction Stir Lap Welded 6061 Aluminium Alloy at various welding speeds
  فرهاد غروی ایمان ابراهیم زاده علی سهیلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  103 - Fabrication of in situ Al-Ni surface composite on 2024 aluminum alloy by friction stir processing
  ابراهیم بهرامی مرتضی شمعانیان حسین ادریس
• Open Access Article
  • Abstract Page
  • Full-Text
  
  104 - Investigation of effect of tool geometry on formation of common defects, and mechanical properties of 5456 Aluminum alloy, in Friction Stir Lap Welded process
  MOHAMMADREZA NADERI محمد علی صفرخانیان امیر حسین کوکبی امین عبداله زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  105 - Study the microstructure and hardness of FSW of API 70 steel at the presence of TiO2 particles
  Rasoul Pouriamanesh KAMRAN Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  106 - Effect of Shoulder Surface Angle of Tool on Joint Properties in Friction Stir Welding of 5052 Aluminium Alloy
  فرهاد غروی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  107 - Effect of Tool Rotation Speed on the Mechanical Properties and Corrosion Behavior of Dissimilar Friction Stir Welded of 5083 Aluminium Alloy and Commercially Pure Titanium
  Masoud Shabani بهروز شایق بروجنی رضا ابراهیمی کهریزسنگی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  108 - Investigation of Microstructure, Hardness and Intermetallic Compound in Friction stir Welding of AA6065 Aluminum Alloy to Copper
  مجید الیاسی Rahim Narimani Mortza Hosseinzadeh Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  109 - Friction Stir Welding of Ultrafine-Grained Al 1050: Investigation of Pin Geometry, Welding Atmosphere Temperature and Welding Speeds on the Mechanical Properties
  Morteza Hosseini Habib Danesh-Manesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  110 - Aluminum alloy (АМГ6М) joining by two processes of friction-stir and non-consumable Tungsten electrode welding and comparison of their mechanical and microstructure properties
  Aliasghar Torabi Tahmineh Ahmadi Afshin Shirali Mohammadreza Khanzadeh ghareshiran Majid Taghian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  111 - Modification of Microstructure and Enhancing Mechanical Properties of as-cast AZ91 Magnesium alloy via Friction Stir Processing
  Hassan Jiryaei Sharahi Majid Pouranvari Mojtaba Movahedi
  10.30495/apme.2021.681639
• Open Access Article
  • Abstract Page
  • Full-Text
  
  112 - Effect of Interlayer Type on Mechanical Properties and Microstructure of the 6061 Aluminum Alloy Joint by Friction Stir Welding
  seyed amin kafaei Hamed Sabet Mohsen Ghanbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  113 - Effect of Rotational Speed on Microstructure and Mechanical Properties of AA5456 Alloy Welded by FSW-Lap Joint
  mohamad ali safarkhanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  114 - Evolution of the Microstructure and Mechanical Properties of Friction Stir Welded Ferrite-Martensite DP700 Dual Phase Steel
  Mahdi Mahmoudiniya Amir Hossein Kokabi Massoud goodarzi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  115 - The Effect of Pin Speed on the Microstructural, Mechanical, and Biological Properties of Ti/HA Surface Composites Produced by FSP Method
  Amirhosein Shahbaz Mehrdad  Abbasi Hamed Sabet
  10.71753/ma.2024.1089980
• Open Access Article
  • Abstract Page
  • Full-Text
  
  116 - Optimization of Effective Parameters in the Stir Friction Extrusion Process on Porosity and Tensile Strength of SiC Ceramic Particles Reinforced AA1050 Aluminum Matrix Composite
  Mojtaba Soleimanipour Reza Abedinzadeh Seyyed Ali Eftekhari Ali Heidari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  117 - Evaluation of wear properties of Al7075/SiC-BN hybrid nano-composite surface layer produced by friction stir processing
  Mahmoud Soleymani Seyed Farshid Kashani Bozorg AliMohamad Hadian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  118 - Effect of Friction Stir Welding (FSW) on Corrosion Behavior of Pure Copper in 3.5 % wt NaCl Solution
  amirhossein taheri Arash Fattah-alhosseini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  119 - بررسی عددی انتقال حرارت و جریان آرام نانوسیال آب-اکسید آلومینیم در ‏میکروکانال مستطیلی دندانه‌دار
  داود طغرایی آرش کریمی پور امید علی اکبری مجید زرین قلم حبیب اله عالی‌پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  120 - بررسی اثر سرعت خطی و دورانی ابزار بر روی جریان مواد و تولید حرارت در جوشکاری اصطکاکی اغتشاشی پلی متیل متاکریلات (PMMA)
  حامد آقاجانی درازکلا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  121 - بهینه سازی پارامترهای جوشکاری فولاد کم‌کربن EN 10130 به روش جوشکاری اصطکاکی-اغتشاشی
  اکبر علیمحمدی مسعود کثیری مسعود افرند حسین نوروزی فروشانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  122 - Effect of friction stir welding parameters of aluminum alloy tubes on succeeding rotary draw bending
  Alireza Soleymanipoor Hamid Montazerolghaem Mohsen Loh-mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  123 - بررسی تأثیر ضریب اصطکاک بر میزان عیب دم ماهی در فرایند نورد حلقوی گرم
  امیر حسین قیصری محمدرضا فروزان عبدالعلی مراثی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  124 - استفاده از روش نشر اکوستیک برای مطالعه خرابی سطح در فرایند اصطکاک
  مهدی احمدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  125 - بررسی آزمون اصطکاکی تی شکل برای آلیاژ تیتانیوم در دمای بالا
  فرزان براتی یاسر نعمتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  126 - بررسی اثر اصطکاک بر تعریض و برآمدگی جانبی در نورد تخت ‌ به روش المان محدود
  محمود سلیمی امین فضیله
• Open Access Article
  • Abstract Page
  • Full-Text
  
  127 - An overview of Friction stir processing of magnesium alloys reinforced by ceramic additive: Microstructure and mechanical properties
  Masoud Kasiri-Asgarani
  10.71939/jsme.2024.1120195
• Open Access Article
  • Abstract Page
  • Full-Text
  
  128 - Manufacturing High-Strength HA-Ti Surface Composites by Friction Stir Processing with Different Filler Mixtures
  A Shahbaz Mehrdad Abbasi H Sabet
• Open Access Article
  • Abstract Page
  • Full-Text
  
  129 - Comparison and Analysis of the Effect of Tools with Pins of Different Cross-Sections in the Friction-Stir Welding Method
  Aala Hadi Bejai  Almayali Ahmad Afsari Seyed Mohammad Reza Nazemosadat Mohammad Marzban
  10.71762/g8we-ef39
• Open Access Article
  • Abstract Page
  • Full-Text
  
  130 - Comparison of the Microstructure and Mechanical Behavior of the Welding Zone of Aluminum Alloy 5754 by FSW and TIG Methods
  Esmaeil  Zarei Ahmad  Afsari Eshagh  Saharkhiz Seyed Kambiz  Ghaemi Osgouie
  10.71762/7mt5-v498
• Open Access Article
  • Abstract Page
  • Full-Text
  
  131 - protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy
  omid zarei mostafa mosavizade fateme zarghani hamed zarei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  132 - Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy
  منصور مردعلی زاده محمد علی صفرخانیان محمد رضا سلیمانی یزدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  133 - Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP)
  Hassan Abdollah-pour Mehdi Rezaeian-delouei Mohammad Tajally Seyyed Mostafa Mousavizade Noghabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  134 - synthesis and characterization of Al-Al3Ti in-situ composite produced by fsp using reactive mechanically alloyed powder
  Behnam Lotfi pooriya poorchini Zohreh Sadeghian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  135 - Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing
  Gholamreza Ghafari Mina Safa Farzad Soleymani Gholamreza Khalaj
  10.30495/jnm.2023.31565.1986
• Open Access Article
  • Abstract Page
  • Full-Text
  
  136 - Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles
  Arash Behzadinezhad Abbas mohassel Hamid Omidvar Nader Setoudeh
  10.30495/jnm.2022.28682.1932
• Open Access Article
  • Abstract Page
  • Full-Text
  
  137 - Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast A216 alloy
  Gholamreza Khalaj Gholamreza Ghaffari Bahram Abdolmaleki
  10.30495/jnm.2022.30295.1955
• Open Access Article
  • Abstract Page
  • Full-Text
  
  138 - Evaluation of tribological behavior of PEO composite coating containing SiO2 particles on 7075 aluminum alloy
  Mohammad Razazi Boroujeni Zahraa Salah Hadi Aljassar Farhad Azimifar
  10.30495/jnm.2023.31857.1995
• Open Access Article
  • Abstract Page
  • Full-Text
  
  139 - The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method
  Amirhosein Shahbaz Mehrdad Abbasi Hamed Sabet
  10.30495/jnm.2024.32961.2027
• Open Access Article
  • Abstract Page
  • Full-Text
  
  140 - Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy
  F. zarghani seid m. mousavizade G.R Ebrahimi H.R. Ezatpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  141 - Fabrication of Aluminum Foam by ARB and Investigation on Its Friction Stir Welded Joint Properties
  S.J موسوی دولت آبادی S. توحید
• Open Access Article
  • Abstract Page
  • Full-Text
  
  142 - In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing
  M. Zadali M. kotiani K. Ranjbar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  143 - Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing
  مهدی Azizieh مهدی Boroujerdnia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  144 - Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing
  H. Masroor K. Janghorban H. Danesh Manesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  145 - Exploring the Impact of Rubber Friction in the Localized Pipe Hollowing Process Using a Rubber Pad
  Ehsan Mehrabi Gohari Iman Pishkar Meysam Darvishi
  10.71762/n85w-k683
• Open Access Article
  • Abstract Page
  • Full-Text
  
  146 - Stress concentration in the joint of In718 and Mar-M247 superalloys after friction welding using the finite element method
  Seyed Rahim Kiahosseini