Effects of Glass Fiber Reinforced Polymer on Geotechnical Properties of Clayey Soil

Subject Areas : Structural Engineering

Fardin Asadollahi ¹ , Rouzbeh Dabiri ²

1 - Department of Geotechnical Engineering, Maraghe Branch, Islamic Azad University, Maraghe, Iran
2 - bDepartment of Civil Engineering, Tabriz Branch, Islamic Azad University, Tabriz, Iran

Received: 2017-03-30 Accepted : 2017-05-19 Published : 2024-09-25

Keywords:

References:

[1] Gray, D. H. and Ohashi, H., Mechanics of Fiber Reinforcement in Sand, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.109, No. (3), 335-353, 1983.

[2] Dean, R. and Fretting, F., Soil Randomly Reinforced with Fibers. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 112, No.4, 823-827, 1986.

[3] Arenzic, R. M., and Chowdhury, R. N., Laboratory Investigation of Earth Walls Simultaneously Reinforced by Strips and Random Reinforcement, Geotechnical Testing Journal, ASTM, Vol.11, No.4, 241-247, 1988.

[4] Benson, C. H. and Kayer, M. V.,  Reinforcing Sand with Strips of Reclaimed High-Density Polyethylene, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.120, No.5, 828-855, 1994.

[5] Ranjan, G., Vasan, R. M., and Charan, H. D. Probabilistic Analysis of Randomly Distributed Fiber Reinforced Soil, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.122, No.6, 419 – 426, 1996.

[6] Michalowski, R. and Zoba, A., Failure of Fiber Reinforced Granular Soils, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.122, No.3, 226-234, 1996.

[7] Andersland, O. B. and Khattac, A. S., Shear Strength of Kaolinite/Fiber Soil Mixtures. Proceeding International Conference on Soil Reinforcement, Paris, France, 20-26, 1997.

[8] Wang, Y., Frost, J. D. and Murray, J., Utilization of Recycled Fiber for Soil Stabilization, Proceedings of the Fiber Society Meeting, May 17-19, Guimaraes, Portugal, 59-62, 2000.

[9] Cai, Y., Shi, B., NG, C. W. W. and Tang, C., Effect of polypropylene fiber and lime admixture on engineering properties of clayed soil, Engineering Geology, Vol. 87, 230-240, 2006.

[10] Erdinciler, A., Ayhan, V., Influence of tire fiber inclusions on shear strength sand. Geosynthetic International journal, Vol. 17, 183-192, 2010.

[11] Sukantasokl, P., Jamsawang, P., Use of steel and polypropylene fibers to improve flexural performance of deep soil-cement column, Construction Building Material, Vol.29, No.1, 201-205, 2012.

[12] Cristelo, N., Cunha, M. C., Dias, M., Gomes, T. A., Miranda, T. and Araujo, N., Influence of discrete fiber reinforcement on the uniaxial compression response and seismic wave velocity of a cement-stabilized sandy-clay, Geotextiles and Geomembranes, Vol.43, 1-13, 2015.

[13] Sahebkaram, A and Dabiri, R., Effects of fiber type on improving the bearing capacity of clayey soils, International journal on technical and physical problems of engineering, Vol.9, No.30, 43-50, 2017. 

[14] ASTM D421-85, Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants, Annual book of ASTM standards, (reapproved 1998), 1985.

[15] ASTM D422-63, Standard Test Method for article-Size Analysis of Soils, Annual book of ASTM standards (reapproved 1998), 1963.

[16] ASTM-D 4972, Standard test method for PH of soils, Annual book of ASTM standards, 1995.

[17] ASTM D 4318-95a, Standard test method for liquid limit, plastic limit an plasticity index for soils, Annual book of ASTM standards, 1995.

[18] ASTM-D 854-02, Standard test method for specific gravity of soil solids by water pycnometer, Annual book of ASTM standards, 2002.

[19] ASTM-D 698-00, Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3)), Annual book of ASTM standards, 2000.

[20] ASTM-D 3080-98, Standard test method for direct shear test of soils under consolidated drained condition, 1998.

[21] ASTM-D 2166/D2166M-13, Standard test method for unconfined compressive strength of cohesive soils, Annual book of ASTM standards, 2013.

[22] ASTM-D 5084-03, Standard test method for measurement of hydraulic conductivity of saturated porous materials using flexible wall permeameter, Annual book of ASTM standards, 2004.