Subject Areas : Telecommunication
1 -
Keywords:
Abstract :
References:
1. Akande, I., et al., Overview of mechanical, microstructural, oxidation properties and high-temperature applications of superalloys. Materials Today: Proceedings, 2021. 43: p. 2222-2231.
2. Ganji, D.K. and G. Rajyalakshmi, Influence of alloying compositions on the properties of nickel-based superalloys: a review. Recent Advances in Mechanical Engineering: Select Proceedings of NCAME 2019, 2020: p. 537-555.
3. Simić, M., et al., High temperature materials: properties, demands and applications. Hemijska industrija, 2020. 74(4): p. 273-284.
4. Akinlabi, E.T. and R.M. Mahamood, Solid-state welding: friction and friction stir welding processes. 2020: Springer.
5. Li, R. and T. Li, Friction stir welding, in Advanced Welding Methods and Equipment. 2024, Springer. p. 107-146.
6. Kumar, S. and J.K. Katiyar, Roles of Tribology in Friction Stir Welding and Processing, in Tribology in Sustainable Manufacturing. 2024, CRC Press. p. 162-188.
7. Bhojak, V., et al., Friction stir process: a comprehensive review on material and methodology. Indian Journal of Engineering and Materials Sciences (IJEMS), 2023. 30(1): p. 45-64.
8. Kiahosseini, S.R. and A. Aminian, Mechanical and corrosion performance of multilayer ceramic coatings deposited on an austenitic stainless steel using plasma spray. Bulletin of materials science, 2019. 42(4): p. 160.
9. Kiahosseini, S.R., et al., Adhesion, microstrain, and corrosion behavior of ZrN-coated AZ91 alloy as a function of temperature. Journal of Materials Research, 2013. 28(19): p. 2709-2714.
10. Arif, M., et al., Green welding. Exploring the environmental and health benefits of friction stir welding over conventional welding methods. Вестник Сибирского государственного индустриального университета, 2023(1 (43)): p. 83-88.
11. Gajjela, R., et al., Balancing Act Sustainability and Environmental Considerations in Friction Stir Processing of Hybrid Composites. Utilizing Friction Stir Techniques for Composite Hybridization, 2024: p. 316-333.
12. Raj, A.K., et al. Development of High-performance Welding Consumables and Filler Materials: A Review. in Conference of Innovative Product Design and Intelligent Manufacturing System. 2023. Springer.
13. Martin, G., et al., WELDING INSPECTION AND NONDESTRUCTIVE EXAMINATION.
14. Abroug, F., et al., High cycle fatigue strength of additively manufactured AISI 316L Stainless Steel parts joined by laser welding. Engineering Fracture Mechanics, 2022. 275: p. 108865.
15. Milella, P.P., Notch Effect, in Fatigue and Corrosion in Metals. 2024, Springer. p. 479-518.
16. Sadat Hosseini, A., M.R. Bahaari, and M. Lesani, Formulas for stress concentration factors in T&Y steel tubular joints stiffened with FRP under bending moments. International Journal of Steel Structures, 2022. 22(5): p. 1408-1432.
17. Wang, X., S. Li, and L. Peng, A structural curve with reduced stress concentration and its elastic–plastic failure analysis. Engineering Failure Analysis, 2024. 162: p. 108339.
18. Knorovsky, G., et al., INCONEL 718: A solidification diagram. Metallurgical transactions A, 1989. 20: p. 2149-2158.
19. Harris, K., G. Erickson, and R. Schwer, MAR-M247 derivations—CM247 LC DS alloy, CMSX single crystal alloys, properties and performance. Superalloys, 1984. 1984: p. 221-230.
20. Mahaffey, D.W., Inertia Friction Welded Ni-Base Superalloys: Process Examination, Modeling and Microstructure. 2016: The Ohio State University.
21. Gregori, A. and D. Bertaso, Welding and deposition of nickel superalloys 718, waspaloy and single crystal alloy CMSX-10. Welding in the World, 2007. 51: p. 34-47.
22. Senkov, O.N., et al., Inertia friction welding of dissimilar superalloys Mar-M247 and LSHR. Metallurgical and materials transactions A, 2014. 45: p. 5545-5561.
23. Akca, E. and A. Gürsel, A review on superalloys and IN718 nickel-based INCONEL superalloy. Period. Eng. Nat. Sci, 2015. 3(1): p. 15-27.
24. Liu, D., et al., Finite element analysis of high-speed motorized spindle based on ANSYS. Open Mechanical Engineering Journal, 2011. 5(1): p. 258-67.
25. Kaufman, M., Properties of cast Mar-M-247 for turbine blisk applications. Superalloys 1984, 1984: p. 43-52.
26. Shigley, J., C. Mischke, and R. Budynas, Shigley’s Mechanical Engineering Design, vol. 8. 2008, McGraw-Hill, New York, NY, USA.
1. Akande, I., et al., Overview of mechanical, microstructural, oxidation properties and high-temperature applications of superalloys. Materials Today: Proceedings, 2021. 43: p. 2222-2231.
2. Ganji, D.K. and G. Rajyalakshmi, Influence of alloying compositions on the properties of nickel-based superalloys: a review. Recent Advances in Mechanical Engineering: Select Proceedings of NCAME 2019, 2020: p. 537-555.
3. Simić, M., et al., High temperature materials: properties, demands and applications. Hemijska industrija, 2020. 74(4): p. 273-284.
4. Akinlabi, E.T. and R.M. Mahamood, Solid-state welding: friction and friction stir welding processes. 2020: Springer.
5. Li, R. and T. Li, Friction stir welding, in Advanced Welding Methods and Equipment. 2024, Springer. p. 107-146.
6. Kumar, S. and J.K. Katiyar, Roles of Tribology in Friction Stir Welding and Processing, in Tribology in Sustainable Manufacturing. 2024, CRC Press. p. 162-188.
7. Bhojak, V., et al., Friction stir process: a comprehensive review on material and methodology. Indian Journal of Engineering and Materials Sciences (IJEMS), 2023. 30(1): p. 45-64.
8. Kiahosseini, S.R. and A. Aminian, Mechanical and corrosion performance of multilayer ceramic coatings deposited on an austenitic stainless steel using plasma spray. Bulletin of materials science, 2019. 42(4): p. 160.
9. Kiahosseini, S.R., et al., Adhesion, microstrain, and corrosion behavior of ZrN-coated AZ91 alloy as a function of temperature. Journal of Materials Research, 2013. 28(19): p. 2709-2714.
10. Arif, M., et al., Green welding. Exploring the environmental and health benefits of friction stir welding over conventional welding methods. Вестник Сибирского государственного индустриального университета, 2023(1 (43)): p. 83-88.
11. Gajjela, R., et al., Balancing Act Sustainability and Environmental Considerations in Friction Stir Processing of Hybrid Composites. Utilizing Friction Stir Techniques for Composite Hybridization, 2024: p. 316-333.
12. Raj, A.K., et al. Development of High-performance Welding Consumables and Filler Materials: A Review. in Conference of Innovative Product Design and Intelligent Manufacturing System. 2023. Springer.
13. Martin, G., et al., WELDING INSPECTION AND NONDESTRUCTIVE EXAMINATION.
14. Abroug, F., et al., High cycle fatigue strength of additively manufactured AISI 316L Stainless Steel parts joined by laser welding. Engineering Fracture Mechanics, 2022. 275: p. 108865.
15. Milella, P.P., Notch Effect, in Fatigue and Corrosion in Metals. 2024, Springer. p. 479-518.
16. Sadat Hosseini, A., M.R. Bahaari, and M. Lesani, Formulas for stress concentration factors in T&Y steel tubular joints stiffened with FRP under bending moments. International Journal of Steel Structures, 2022. 22(5): p. 1408-1432.
17. Wang, X., S. Li, and L. Peng, A structural curve with reduced stress concentration and its elastic–plastic failure analysis. Engineering Failure Analysis, 2024. 162: p. 108339.
18. Knorovsky, G., et al., INCONEL 718: A solidification diagram. Metallurgical transactions A, 1989. 20: p. 2149-2158.
19. Harris, K., G. Erickson, and R. Schwer, MAR-M247 derivations—CM247 LC DS alloy, CMSX single crystal alloys, properties and performance. Superalloys, 1984. 1984: p. 221-230.
20. Mahaffey, D.W., Inertia Friction Welded Ni-Base Superalloys: Process Examination, Modeling and Microstructure. 2016: The Ohio State University.
21. Gregori, A. and D. Bertaso, Welding and deposition of nickel superalloys 718, waspaloy and single crystal alloy CMSX-10. Welding in the World, 2007. 51: p. 34-47.
22. Senkov, O.N., et al., Inertia friction welding of dissimilar superalloys Mar-M247 and LSHR. Metallurgical and materials transactions A, 2014. 45: p. 5545-5561.
23. Akca, E. and A. Gürsel, A review on superalloys and IN718 nickel-based INCONEL superalloy. Period. Eng. Nat. Sci, 2015. 3(1): p. 15-27.
24. Liu, D., et al., Finite element analysis of high-speed motorized spindle based on ANSYS. Open Mechanical Engineering Journal, 2011. 5(1): p. 258-67.
25. Kaufman, M., Properties of cast Mar-M-247 for turbine blisk applications. Superalloys 1984, 1984: p. 43-52.
26. Shigley, J., C. Mischke, and R. Budynas, Shigley’s Mechanical Engineering Design, vol. 8. 2008, McGraw-Hill, New York, NY, USA.
