List of Articles deformation

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Damping effects in ^{100}Sn ^{+ 16}O and ^{100}Sn ^{+ 16Ca} collisions
  Hossein Sadeghi Mahdieh Ghafouri
  10.30495/jtap.162209
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Morphotectonic Analysis of Nar Anticline (NW Lamerd)
  سید احمد Alavi رضا Derakhshani علی Haghshenas
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Determination of Mechanical Properties of Pistachio nut and its kernel (Ahmad Aghaei variety)
  Mohammad Gholami Parashkouhi Behnam Gooshki Mashaallah Kermani Shahram Mohseni Mehrdad Salimi Beni
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Investigating the Effects of Expansion Equal Channel Angular Extrusion (Exp-ECAE) on Dynamic Behavior of AA7075 Aluminum Alloy
  J. Shahbazi Karami S. Sepahi-Boroujeni Mohsen Khodsetan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Development of Thermal and Structural Deformation Model to Predict the Part Build Dimensional Error in Fused Deposition Modeling
  K. Chockalingam M. Karthic N. Jawahar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Free Vibration of Functionally Graded Epoxy/Clay Nanocomposite Beams based on the First Order Shear Deformation Theory
  Mahdi Karami Khorramabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Evaluating the Effect of the Second Invariant of Deformation Tensor in The Axial and Azimuthal Shear Deformations
  Amir Ghafouri Sayyad Ali Imam Shahram Etemadi Haghighi
  10.30486/admt.2021.1928399.1275
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Creep Life Assessment of a Super-Heater Tube
  J Jelwan
  10.22034/jsm.2020.1876148.1480
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Free Vibration Analysis of Multi-Layer Rectangular Plate with Two Magneto-Rheological Fluid Layers and a Flexible Core
  M Shekarzadeh M.M Najafizadeh P Yousefi A. R Nezamabadi K Khorshidi
  10.22034/jsm.2019.1877385.1487
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Efficient Higher-Order Shear Deformation Theories for Instability Analysis of Plates Carrying a Mass Moving on an Elliptical Path
  E Torkan M Pirmoradian
  10.22034/jsm.2019.668763
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - An Axisymmetric Contact Problem of a Thermoelastic Layer on a Rigid Circular Base
  F Guerrache B Kebli
  10.22034/jsm.2019.668619
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Numerical Analysis of Composite Beams under Impact by a Rigid Particle
  N Akbari B Chabsang
  10.22034/jsm.2019.664217
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - On Static Bending, Elastic Buckling and Free Vibration Analysis of Symmetric Functionally Graded Sandwich Beams
  A.S Sayyad P.V Avhad
  10.22034/jsm.2019.664227
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Effect of Temperature Dependency on Thermoelastic Behavior of Rotating Variable Thickness FGM Cantilever Beam
  M.M.H Mirzaei A Loghman M Arefi
  10.22034/jsm.2019.666768
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - An Efficient Finite Element Formulation Based on Deformation Approach for Bending of Functionally Graded Beams
  H Ziou M Himeur H Guenfoud M Guenfoud
  10.22034/jsm.2019.1867884.1437
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Effect of Winkler Foundation on Radially Symmetric Vibrations of Bi-Directional FGM Non-Uniform Mindlin’s Circular Plate Subjected to In-Plane Peripheral Loading
  N Ahlawat R Lal
  10.22034/jsm.2019.1873720.1466
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Effect of Vertex Angle on Elastic-Plastic Stability of a Steel Open Conical Shell
  H Shokrollahi
  10.22034/jsm.2019.1873249.1462
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Dynamic Stability Analysis of Bi-Directional Functionally Graded Beam with Various Shear Deformation Theories Under Harmonic Excitation and Thermal Environment
  A Ghorbanpour Arani Sh Niknejad A Mihankhah I Safari
  10.22034/jsm.2019.583270.1375
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - A Novel Spring-Based Model for Damage Investigation of Functionally Graded Beams
  S Karimi M Bozorgnsab R Taghipour M.M Alipour
  10.22034/jsm.2021.1928249.1690
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Improved High-Order Analysis of Linear Vibrations of a Thick Sandwich Panel With an Electro-Rheological Core by Using Exponential Shear Deformation Theory
  M Keshavarzian M.M Najafizadeh K Khorshidi P Yousefi M Alavi
  10.22034/jsm.2020.1898465.1584
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Analysis of a Functionally Graded Finite Wedge Under Antiplane Deformation
  A. R Shahani I Shakeri
  10.22034/jsm.2021.1897498.1577
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - The Modelling of the Mechanics of Deformation in Plane Strain Upsetting of Round Cross-Section Billets Between the Flat and V-Shaped Dies
  M Maleki H Haghighat
  10.22034/jsm.2021.1929196.1693
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Post-buckling analysis of porous circular plate with small initial deflection using first-order shear deformation theory
  M. M Mohieddin Ghomshei Mahdi Alimohammadi
  https://doi.org/10.60664/jsm.2024.3121798
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Three-Dimensional Simulation of a Steel Plate Deformation as a Result of Underwater Shock Wave using Fluid-Solid Interaction
  Arman  Jafari Valdani Armen  Adamian
  https://doi.org/10.60664/jsm.2024.3081785
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Dynamical stability of bi-directionally graded moving beams
  Mohammad Hasan Babaei Rochi Jalil Jamali
  https://doi.org/10.60664/jsm.2024.3071784
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Bending Analysis of Laminated Composite Plates with Arbitrary Boundary Conditions
  A.M Naserian Nik M Tahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Elastic Buckling of Moderately Thick Homogeneous Circular Plates of Variable Thickness
  S.K Jalali M.H Naei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - An Efficient Co Finite Element Approach for Bending Analysis of Functionally Graded Ceramic-Metal Skew Shell Panels
  G Taj A Chakrabarti
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - A Static Flexure of Thick Isotropic Plates Using Trigonometric Shear Deformation Theory
  Y.M Ghugal A.S Sayyad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Vibration Analysis of Functionally Graded Spinning Cylindrical Shells Using Higher Order Shear Deformation Theory
  M Mehrparvar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Free Vibration of Thick Isotropic Plates Using Trigonometric Shear Deformation Theory
  Y.M Ghugal A.S Sayyad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Comparison of Two Kinds of Functionally Graded Cylindrical Shells with Various Volume Fraction Laws for Vibration Analysis
  M.R Isvandzibaei P.J Awasare
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Displacements and Stresses in Pressurized Thick FGM Cylinders with Varying Properties of Power Function Based on HSDT
  M Ghannad H Gharooni
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - The Effect of Elastic Foundations on the Buckling Behavior of Functionally Graded Carbon Nanotube-Reinforced Composite Plates in Thermal Environments Using a Meshfree Method
  Sh Shams B Soltani M Memar Ardestani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Smart Vibration Control of Magnetostrictive Nano-Plate Using Nonlocal Continuum Theory
  A Ghorbanpour Arani Z Khoddami Maraghi H Khani Arani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Third Order Formulation for Vibrating Non-Homogeneous Cylindrical Shells in Elastic Medium
  M Gheisari H Molatefi S.S Ahmadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Response Determination of a Beam with Moderately Large Deflection Under Transverse Dynamic Load Using First Order Shear Deformation Theory
  F Sohani H.R Eipakchi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Vibration Analysis of FG Nanoplate Based on Third-Order Shear Deformation Theory (TSDT) and Nonlocal Elasticity
  M.M Najafizadeh M Raki P Yousefi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Spectral Finite Element Method for Free Vibration of Axially Moving Plates Based on First-Order Shear Deformation Theory
  M.R Bahrami S Hatami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - New Method for Large Deflection Analysis of an Elliptic Plate Weakened by an Eccentric Circular Hole
  Sh Dastjerdi L Yazdanparast
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Free Vibration of Functionally Graded Cylindrical Shell Panel With and Without a Cutout
  k.S Sai Ram K Pratyusha P Kiranmayi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Analysis of Viscoelastic Functionally Graded Sandwich Plates with CNT Reinforced Composite Face Sheets on Viscoelastic Foundation
  A Ghorbanpour Arani M Emdadi H Ashrafi M Mohammadimehr S Niknejad A.A Ghorbanpour Arani A Hosseinpour
  10.22034/jsm.2019.668608
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Quasi-Static Deformation of a Uniform Thermoelastic Half –Space Due to Seismic Sources and Heat Source
  A.K Vashishth K Rani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Investigation of Pre-buckling Stress Effect on Buckling Load Determination of Finite Rectangular Plates with Circular Cutout
  S Abolghasemi H.R Eipakchi M Shariati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Non-Local Thermo-Elastic Buckling Analysis of Multi-Layer Annular/Circular Nano-Plates Based on First and Third Order Shear Deformation Theories Using DQ Method
  Sh Dastjerdi M Jabbarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Free and Forced Transverse Vibration Analysis of Moderately Thick Orthotropic Plates Using Spectral Finite Element Method
  M.R Bahrami S Hatami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Some notes concerning the convergence control parameter in homotopy analysis method
  M. Paripour J. Saeidian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Kinematics of Transpressional Deformation Zones in the Urmia Fault Zone, Northwest Iran
  Hassan Haji Hosseinlou
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Analysis of strain and stress in composite layered plate using shear deformation theory and secant function
  Iman Najimi Saeed Jafari Mehrabadi Peyman Yousefi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Role of Diapirism on Stratigraphy Evolution of Mangrak Salt Dome Basin (South West Firozabad)
  anahita keynezhad Ghis Badkhashan Moomtaz Moslem Ghavam Abadi Zahra Rezaee
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Numerical Investigation and Optimization of Die Parameters in Parallel Tubular Channel Angular Pressing Process
  Amin Armanian Hassan khademi zadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Investigation on effect of die geometric parameters on equal channel angular extrusion of bulk nanostructured magnesium alloy AZ31
  Mohammad Farzanfar Ali Heidari Mohsen Loh-mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Deformation Performance of the Karkheh Earth Dam with Mixed and Pure Clay Coreunder Seismic Excitations
  Majdedin Mir Hosseini R. Bahrami M. AsadolahiPajouh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Assessment of the Drain Conditions on Variations of the Pore Pressure in Surrounding Soil of the Tunnel
  Mohammad Azadi Azadi S.M Mir Mohammad Hosseinib S.M. Nasimifar M Pouranian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Investigation of Liquefaction Mechanism in Double Sand Lenses
  Y. Pashang pisheh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Modelling Dependency of the Steady-State Grain Size on the Stacking Fault Energy in Severely Plastic Deformed Materials
  Maryam Bahmanpour Majid Abdellahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Optimization of die geometry for Tube Channel Pressing
  Mohammad Hassan Farshidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Finite element simulation of pyroplastic deformation, anisotropic shrinkage and heterogeneous densification for ceramic materials during liquid phase sintering process
  Hamed Yaghoubi Esmail Salahi Fateme Taati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Upper bound and numerical analysis of cyclic expansion extrusion (CEE) process
  M. M. Samandari S.H.R. Torabi Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Plastic deformation analysis in parallel tubular channel angular pressing (PTCAP)
  Ghader Faraji Mahmoud Mousavi Mashhadia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - A new approach for achieving excellent strain homogeneity in tubular channel angular pressing (TCAP) process
  Ghader Faraji F. Reshadi M. Baniasadia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Plastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing
  mehdi shaban sahel gozalzadeh beitallah eghbali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Numerical investigation of strain distribution during cyclic expansion extrusion (CEE)
  Hamid Reza Torabi M.M. Samandari Ghader Faraji Abolfazl Masoumi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Finite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials
  Minoo Tabanfard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Modeling and production of high strength Al strips by equal channel multi angular pressing method
  Peyman Keshtiban Mohammad Zadshakouyan Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Effect of Twist Extrusion Process on the Mechanical Properties and Microstructure Evolution of 70-30 Brass Alloy
  Sara Hosseini Faregh Amir Hasani Majid Naseri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Evaluation of Microstructure and Tensile Behavior of Fine-Grained AZ61 Alloy Tube Processed by Severe Plastic Deformation
  Milad AAli Ghader Faraji Mohammad Reza Sadrkhah Ali Fata Mohammad Jafar Hadad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Effects of Equal Channel Angular Pressing (ECAP) Process with an Additional Expansion-Extrusion Stage on Microstructure and Mechanical Properties of Mg–9Al–1Zn
  Mahnoush Rassa Geonik Azadkoli Mohammad Eftekhari Ali Fata Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Continuous Grain Refinement of Pure Aluminum During Cyclic Contraction/Expansion Extrusion (CCEE) Analyses by Micromechanical-Based FE and Experimental Methods
  Hossein Jafarzadeh Sina Hassan Alipouri Fard Alireza Babaei
  10.71670/jmatpro.2024.981647
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures
  Abdolreza Rastitalab Salar Khajehpour Ahmad Afsari Shahin Heidari Javad Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures
  Abdolreza Rastitalab Salar Khajehpour Ahmad Afsari Shahin Heidari Javad Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Investigation of Effective Parameters on the Surface Temperature Gradient under Equal Channel Angular Pressing Process of AA2017
  Farshid Ahmadi Hadi Mansouri Elyas Sarami Foroushani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Investigation of Effective Plastic Strain Heterogeneity and the Effect of Using Interface Sheet in Constrained Groove Pressing of Copper Sheet
  Moein Gholami Ali Hasanabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Experimental and Numerical Analysis of Local Lateral Compression Process of Metal Tubes between Cylindrical Shaped Dies
  Hamzeh Kazemi Heshmatollah  Haghighat
  10.71762/mpmp.2023.996934
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells
  Amin Kolahdooz Seyyed Ali Latifi Rostami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Numerical Simulation of the Effect of Elastic Deformation of work rolls on the rolling force and Comparison with the Results obtained by the Slab Method during the reciprocating cold rolling
  Mohammad Heydari Vini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - The Optimization of the Effective Parameters of the Die in Parallel Tubular Channel Angular Pressing Process by Using Neural Network and Genetic Algorithm Methods
  Amin Armanian Hassan Khademi Zadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process
  Mohammad Honarpisheh Mohammad Reza Aghili Mahdi Kotobi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Numerical/Experimental Analysis of the Deformation of Tubes under Concentrated Load
  Javad Jafari Fesharaki Omid Rejali Seyed Ghasem Madani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - Deformation of Al Alloy during Integrated Extrusion and ECAP: A Simulation Research
  Ankit Sahai Shanti S. Sharma Suren N. Dwivedi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Optimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm
  Afshin Naeimi Mohsen Loh Mousavi Ali Eftekhari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - Assessment the relationship between geometry and fault mechanism whit geomorphic index of active tectonic in west Alborz region
  Ahmad Ali Zare Mehrjardi
  10.30495/jonass.2022.1950946.1021
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - The study of deformation modes of buried pipelines under the permanent land displacement at the site of an active fault
  Mahsen Oghabi Mehdi Khoshvatan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Investigation of the effect of using TADAS dampers in hydraulic structures under continuous loads
  mahmood mohammadi mohammad asadian ghahferokhi mohammad amiri
  10.30495/civil.2022.691331
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - The Reverse Design of Beams and Networks to Provide Strength and Simultaneous Deformation
  Nobakht Bakhtiyari Hassan mosavi aslemir
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Introducing a New Artificial Neural Network Model for prediction of the Pressuremeter Modulus in soils of Tehran
  Shahin Razavi Kamran Goshtasbi Ali Noorzad Kaveh Ahangari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - Investigation of deformation fabrics and emplacement mechanism of NW- Zahedan granites (Kuhe-Zargoli)
  Shahriar Keshtgar Mahbobe Nazari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - Microstructure analysis of Zarab region, south of Kerman
  Farnaz Iranmanesh Amir Shafiei Bafti Sohrab Shahriari Mohsen Pourkermani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Implementation of Higher Order Shear Theory on Isotropic Material and Liu's Bending Part on Laminated Composite Flat Shell Elements
  Taufiq Rochman Agoes Soehadjono Achfas Zacoeb
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - The study of Rossby radius deformation in the development of Atmospheric system
  A. Mohammadi H. Ardakani M. T. Zamanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - روش های تغییر شکل شدید پلاستیک به منظور ریز دانه سازی ساختار ماده برای بهبود خواص مکانیکی در فلزات
  سید حسن سجادی بهروز مهدی خوانی علی پیروی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - بهبود خصوصیات مکانیکی ، به ویژه افزایش مقاومت لوله ها توسط میکرو ساختار فلزات با استفاده از روش تغییر شکل پلاستیک شدید
  سید حسن سجادی حسین پوراکبری سیامک صادقی امید میرجابری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - یک مدل FSDT برای تجزیه و تحلیل ارتعاشات صفحه FG مستطیلی نانو بر اساس تئوری تنش زوج اصلاح شده تحت بار متحرک
  یونس امین
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - تأثیر پارامترهای پایه الاستیک وینکلر-پاسترناک در تحلیل تنش صفحات مستطیل شکل که تحت بار متحرک قرار دارند
  احمدرضا خورشیدوند علی خیری امیر مسعود الله قلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - تجزیه و تحلیل غیر خطی صفحات مستطیلی ویسکوالاستیک تحت فشار صفحه ای
  منوچهر صالحی امین صفی جهان شاهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - تأثیر فرآیندهای HPT و CGP بر خصوصیات معمولی مس
  ش. جعفرزاده H. Bisad ه. میانجی ع. زینعلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - بهبود خصوصیات مکانیکی ، به ویژه افزایش مقاومت لوله ها توسط میکرو ساختار فلزات با استفاده از روش تغییر شکل پلاستیک شدید
  سید حسن سجادی حسین پور اکبری سیامک صادقی امید میرجابری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - تجزیه و تحلیل ارتعاش اجباری صفحات مستطیلی دارای درجه بندی عملکردی با تخلخل تحت بار متحرک
  احمدرضا خورشیدوند علی خیری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  99 - تجزیه و تحلیل ارتعاشات آزاد صفحات مستطیلی دارای درجه بندی ضخیم با استفاده از نظریه صفحه متغیر تقویت شده
  رضا علی بخشی احمد خاواجی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  100 - مروری جامع برگسیختگی خزشی مخازن تحت فشار جدار ضخیم FGM
  مصطفی امیدی بیدگلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  101 - Scrutiny of how to use ornament of allusion in poet's Khaghani and introduction him imagination in this zone
  Akbar hosein pour Moslem ahmadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  102 - The effect of temperature of equal- chanel angular pressing process on mechanical properties and biocompatibility of titanium dental implant
  محمد خدائی Payam Eslamian mahmood meratian Mahdi Hadavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  103 - Investigation of the effect of thermal treatment after welding on the corrosion properties of the interconnecting joint wall of Cu / SS 304 sheets
  Ali Ebrahimi Akbarabadi Abbas Saadat Mohammadreza Khanzadeh hamid bakhtiari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  104 - Vibration Analysis of FG Micro-Beam Based on the Third Order Shear Deformation and Modified Couple Stress Theories
  Mehdi Alimoradzadeh Mehdi Salehi Sattar Mohammadi Esfarjani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  105 - Structural Analysis of Unsymmetric Laminated Composite Timoshenko Beam Subjected to Moving Load
  Mohammad Javad Rezvani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  106 - The effect of explosive welding variables on corrosion behavior of 304 stainless steel–copper joint in 3.5% NaCl solution concentration environment
  MohammadReza Khanzadeh Reza Peykari Hamid Bakhtiari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  107 - مدلسازی استاتیکی غیرخطی ورق هدفمند تابعی نسبتاً ضخیم با استفاده از روش آزادسازی دینامیکی
  محمدجواد محمودی وحید محلوجی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  108 - تحلیل کمانش الاستیک پوسته‌های مرکب با سطح مقطع بیضی تحت بار فشاری محوری
  منصور درویزه ابوالفضل درویزه رضا انصاری الهام کاظمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  109 - تحلیل فرایند اکستروژن پیچشی در قالب با سطح مقطع بیضوی با استفاده از روش کران بالا
  یاسر میرباقری حامد معصومی مجید سیدصالحی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  110 - بررسی فرایند نورد چهار غلتکی به روش تحلیلی و عددی
  محسن اشرفی وحید پورغریب شاهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  111 - تحلیل خمش صفحات ساندویچی کامپوزیتی بر اساس تئوری تغییر شکل برشی مرتبه اول با استفاده از روش مربعات دیفرانسیلی تعمیم یافته و هارمونیک
  مصطفی یزدانی اعظم قاسمی محمد هدایتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  112 - Analysis of Bending and Buckling of Circular Porous Plate Using First-Order Shear Deformation Theory
  A.R. Yadegari Naeini Yadegari Naeini A. Ghasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  113 - Comparison of Artificial Neural Network and Regression Methods in Predicting the Modulus of Deformation of Stone using Dilatometry Test.
  Manouchehr Hoseine Rouzbeh Dabiri Larissa Khodadadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  114 - Effect of mechanical sever plastic deformation on corrosion current density and electrochemical impedance of AZ91 magnesium Alloy
  Seyed Rahim Kiahosseini Armin Aminian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  115 - Investigating the effect of post-weld heat treatment on the corrosion properties of the explosive welded three-layer joint of Cu/Al/Cu
  Heydar Ali Zamani Mohammad Reza Khanzadeh Ali  Bakhtiari Hossein Paydar
  10.71939/jsme.2024.1119738
• Open Access Article
  • Abstract Page
  • Full-Text
  
  116 - Seismic Optimization of Steel Moment Resisting Frame Using Uniform Deformation Algorithm
  Amir hassan Alizadeh Mehdi Rahimi Asl
• Open Access Article
  • Abstract Page
  • Full-Text
  
  117 - An Improved Analytical Model for Prediction of Residual Deformation in Longitudinal Scheme of Laser Tube Forming Process
  Hossein Ebrahimi Zohrhe Ebrahimi
  10.71762/5m06-ps04
• Open Access Article
  • Abstract Page
  • Full-Text
  
  118 - Study on hot deformation behaviuor of Mg-7.1Gd-2.8Y-1.3Nd-0.4Zn magnesium alloy using hyperbolic sine equation and processing maps
  Gholam reza Ebrahimi Ehsan Rezaeii Kheybari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  119 - Effect of severe plastic deformation process on mechanical properties of 1.7225 Steel
  behrouz mahdikhani Mehrdad Javadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  120 - A Review of the Most Important Methods for Severe Plastic Deformation of Titanium
  Sayyed Mohammadreza Sedehi Mohammadreza Maraki Ali Jalali Hadi Ezadi
  10.30495/jnm.2024.32878.2021
• Open Access Article
  • Abstract Page
  • Full-Text
  
  121 - Production of Aluminum metal matrix composite reinforced with Al-Cr-Fe quasicrystal nano-powder by using accumulative roll bonding process and investigation mechanical properties
  Shima Pashangeh Morteza Alizadeh Rasool Amini
  10.30495/jnm.2021.28185.1922
• Open Access Article
  • Abstract Page
  • Full-Text
  
  122 - Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation
  M. Rakhshkhorshid
• Open Access Article
  • Abstract Page
  • Full-Text
  
  123 - The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024
  S. Khani Moghanaki M. Kazeminezhad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  124 - Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP)
  مهدی Shaban Ghazani اکبر Vajd بشیر Mosadegh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  125 - Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method
  V. Ali mirzaloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  126 - Study of Scratch Resistance of Polyethylene and its Composite Reinforced with Nano-Sized Calcium Carbonate
  N. Bazobandi S.M Zebarjad S.A. Sajadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  127 - Electronic Conductance Modulation of Armchair Graphyne Nanoribbon by Twisting Deformation
  Somayeh Fotoohi Mansoureh Pashangpour Saeed Haji-Nasiri
  10.30495/jopn.2023.31553.1281
• Open Access Article
  • Abstract Page
  • Full-Text
  
  128 - Experimental Investigation of Heat Treatment Effects on Mechanical Properties and Microstructure of AA6063 Alloy in ECAP Process
  Hossein Tamim Mohammad Javad Saleh Parhizkar
  https://doi.org/10.60664/jsm.2025.1198119
• Open Access Article
  • Abstract Page
  • Full-Text
  
  129 - Performance Evaluation and Behavior Evaluation of Pitting Stabilization System by Strand Containment Method
  Mahya Ranjbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  130 - Nonlocal Finite Element Model with Eight Degrees of Freedom and Sinusoidal Shear Deformation Theory for Bending and Buckling Analysis of Functionally Graded Nanobeams
  Mehdi Dehghan Mojtaba Esmailian
  10.71939/jsme.2025.1204391