List of Articles finite element method

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Optical imaging and magnetic field simulation of a DC circular planar magnetron sputtering discharge
  Ahmad Rastkar Ali Reza Niknam Mostafa Salahshoor
  10.57647/J.JTAP.2023.1704.38
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Finite element formulation for the free vibration analysis of embedded double-walled carbon nanotubes based on nonlocal Timoshenko beam theory
  Milad Hemmatnezhad Reza Ansari
  10.1186/2251-7235-7-6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Study of photocatalytic decomposition of reactive colorants from textile wastewaters: finite elements numerical modeling and experimental results
  Khashayar Badii Faramarz Doulati Ardejani Seyed Zia-e-din Shafaei Tonekaboni Niaz Mohammad Mahmoodi Farrokh Legha Amini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Analysis of the Free Edge Effect of a Composite Laminate under Axial Tensile Load According to the Environmental Properties of the Composite Materials
  S Ebadi E Anbarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires
  Moslem Namjoo Hossein Golbakhshi Farhad Khoshnam Ahmad Soleimani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Modelling of Non-Uniform Piezoelectric Micro-Cantilever in Different Environments
  Mitra Taghizade A. H. Korayem M. H. Korayem
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Stress and Displacement Analysis of First Molar Hollow Tooth during Dental Filling Operation using Three-Dimensional Finite Element Method
  M. R. Karamooz-Ravari B. Shahriari E. Seyfali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Numerical Simulation of Fluid-Structure Interaction and its Application in Impact of Low-Velocity Projectiles with Water Surface
  N. Khazraiyan N. Dashtian Gerami M. Damircheli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Experimental and Numerical Analysis of Titanium/HA FGM for Dental Implantation
  Sina Sazesh Aazam Ghassemi Reza Ebrahimi Mohammad Khodaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Multi layered finite element analysis of graded coatings in frictional rolling contact
  R. Jahedi S. Adibnazari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Developing a control strategy for AFM nano- micro manipulation
  H. RaeisiFard A. K. Hoshiar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Characterization of Stress Concentration in Thin Cylindrical Shells with Rectangular Cutout Under Axial Pressure
  O. Sam Daliri M. Farahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Investigation on Stress Distribution of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes in Thermal Environment
  Mohammad morad Sheikhi Hamidreza Shamsolhoseinian Rasool Moradi dastjerdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Experimental and Numerical Investigation of the Arms Displacement in a New Electrothermal MEMS Actuator
  M. Kolahdoozan A. Rouhani Esfahani M. Hassani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Experimental Study and Finite Element Simulation of Residual Stress in Welded Sections of Steel P91 Pipes with Multi-pass Welding
  Davood Azadi Nosratollah Solhjoei SayedAli Mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Multi-Objective Optimization of Loading Paths for Double-Layered Tube Hydroforming using Finite Element Analysis
  Hamed Ebrahimi Keshmarzi Ramin Hashemi Reza Madoliat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Numerical Simulation of Ultrasonic Assisted Indentation Tube Forming
  Saeid Dashti Masih Paknejad Amir Abdullah Abbas Pak
  10.30495/admt.2020.1869462.1124
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Weld Distortion and Residual Stresses in Aluminum Hollow Section T-Joint
  Asghar Mahdian Arash Babamiri Behrooz Shahriari
  10.30486/admt.2022.1934601.1296
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Numerical and Experimental Static Bending Analysis of Composite Sandwich Panels with Grid-Stiffened Cores Before and After Transverse Impact Loading
  Ali Asghar Davoodabadi Ali Davar Mohsen Heydari Beni Jafar Eskandari Jam
  10.30486/admt.2021.1904974.1208
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Investigation of In-Situ Compressive Strength of Fiber-Reinforced Mortar and the Effect of Fibers on the Adhesion of Mortar/Steel
  Ali Saberi Varzaneh Mahmood Naderi
  10.30495/admt.2021.1909271.1218
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Finite Element Analysis of the Impact Behavior of Sandwich Panels with Nanocomposite Face sheet (Epoxy/ Fiberglass/Nanosilica)
  Arash Azadi Mahdi Karami Khorramabadi Maziar Mahdipour Jalilian
  10.30486/admt.2023.1957517.1349
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - The Investigating and Simulating the Corona Phenomenon in The Power Transmission Lines of Power Networks Using the Finite Element Method
  noushin dadashzadeh Elnaz poorreza Vahide Mohadesi
  10.30486/mjtd.2023.1981758.1030
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Investigating the Effect of Joint Geometry of the Gas Tungsten Arc Welding Process on the Residual Stress and Distortion using the Finite Element Method
  A Shiri A Heidari
  10.22034/jsm.2019.668764
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Stress Concentration Factor of Single-Layered Graphene Sheets Containing Elliptical Vacancies
  S.K Jalali M.J Beigrezaee
  10.22034/jsm.2019.667250
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Studying the Mechanical and Thermal Properties of Polymer Nanocomposites Reinforced with Montmorillonite Nanoparticles Using Micromechanics Method
  M.H Yas H Shahrani Korani F Zare Jouneghani
  10.22034/jsm.2019.584854.1394
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - The Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
  R Safdarian
  10.22034/jsm.2019.668616
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Fatigue Crack Growth in Plastically Compressible Solids: Role of Negative Stress Ratio, Plastic Compressibility and Strain Softening
  Y Mittal D Khan S Pandey G.Chand Gupta
  10.22034/jsm.2020.1899251.1587
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Vibration of Timoshenko Beam-Soil Foundation Interaction by Using the Spectral Element Method
  S Hamioud S Khalfallah S Boudaa
  10.22034/jsm.2020.1879476.1503
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - On Validity of Analytical Method in Cracked Column Post-Buckling Analysis Using Empirical and Numerical Investigations
  K Salmalian A Alijani H Ramezannejad Azarboni
  10.22034/jsm.2020.1904760.1623
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Finite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
  S.S Bhadauria K.K Pathak M.S Hora
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Prediction of Crack Initiation Direction for Inclined Crack Under Biaxial Loading by Finite Element Method
  P.C Gope S.P Sharma A.K Srivastava
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - On the Analysis of FGM Beams: FEM with Innovative Element
  M Zakeri A Modarakar Haghighi R Attarnejad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Analysis of Laminated Soft Core Sandwich Plate Having Interfacial Imperfections by an Efficient C0 FE Model
  R.P Khandelwal A Chakrabarti P Bhargava
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Wave Propagation in Sandwich Panel with Auxetic Core
  D Qing-Tian Y Zhi-Chun
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Spectral Finite Element Method for Free Vibration of Axially Moving Plates Based on First-Order Shear Deformation Theory
  M.R Bahrami S Hatami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Analytical and Numerical Modelling of the Axisymmetric Bending of Circular Sandwich Plates with the Nonlinear Elastic Core Material
  A Kudin S Choporov Yu Tamurov M.A.V Al Omari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - A New Approach to Buckling Analysis of Lattice Composite Structures
  S.A Galehdari A.H Hashemian J.E Jam A Atrian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Free Vibration of Functionally Graded Cylindrical Shell Panel With and Without a Cutout
  k.S Sai Ram K Pratyusha P Kiranmayi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Analyzing Frequency of Conical (∆ shaped) Tanks
  F Saljughi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Free and Forced Transverse Vibration Analysis of Moderately Thick Orthotropic Plates Using Spectral Finite Element Method
  M.R Bahrami S Hatami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Extended Finite Element Method for Statics and Vibration Analyses on Cracked Bars and Beams
  F Mottaghian A Darvizeh A Alijani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Finite Element Modeling of the Vibrational Behavior of Single-Walled Silicon Carbide Nanotube/Polymer Nanocomposites
  S Rouhi R Ansari A Nikkar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Numerical and Experimental Analysis of Coil’s Number of Rounds and Voltage in Electromagnetic Sheet Forming of Aluminum Alloy 1050
  Sajjad Nadian Bersiani Ahmad Keshavarzi امین کلاهدوز
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Vibration analysis of heavy machine gearbox housing using Finite Element Method
  Hessam Torabzadeh Kashi Mohsen Mardani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Simulation of the Time and Temperature Effects On Spring Back in Tube Bending Process
  Mohammad Hossein Tehrany Mehrdad Ozve Aminian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Design and Modeling of Ultrasonic Phased Array Testing and Ultrasonic waves propagation Simulation in Metal Plate by Finite Element Software (ABAQUS)
  shahram yareiee
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - use natural frequency to diagnose ankylosed teeth
  zavosh Amini ehsan jamshidi Faezeh Eslamipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Investigating the effect of shape and defects of honeycomb structure on its energy absorption capability by finite element method
  Ramin Meshkabadi benyamin tahmaspour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Design and optimization of dc brushless permanent magnet motor
  Hassan hatamlu Zahra hatamlu ramin borjali navesi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Design and simulation of a fast SAW waveguide with Comsol software
  Hadi Amos Majid Ghandchi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Dynamic Load Carrying Capacity of Flexible Manipulators Using Finite Element Method and Pontryagin’s Minimum Principle
  Moharam Korayem Mostafa Nazemizadeh Hamed Rahimi nahooji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Quasi-static Axial Compression of thin-walled Circular Composite Tubes
  Mohammad Mahdi Kheirikhah Sajjad Dehghanpour Mohsen Rahmani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Post-Tensioned Steel Connections Self-Centering Behavior Using the Finite Element Method
  Mahmoudreza Shiravand Ahmadreza Torabipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Finite Element Method for Static Cyclic Behavior of Steel Shear Wall with Corrugated Plates
  Mohammad Reza Farhadi Hassan Aghabarati Hadi Niromand Jazi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Free vibration analysisof soft-core composite-faced sandwich plates using three-dimensional finite element method
  Mohammad Mahdi Kheirikhah Hasan Aghabarati Pooneh Khosravi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - The Effect of Lower Detachment Zone on Buckle Folds Geometry
  O Barani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Finite element modeling of a pavement piezoelectric energy harvester
  Ehsan Latifi Pakdehi Ali Akbar Pasha Zanoosi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Fracture analysis of conical shells containing an internal semi-elliptical crack
  C. Burvill M.M. Kheirikhah S. Omidi S. Gohari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Forming limit curves of AA3105 on multiple temperature conditions: numerical investigation and experimental verification
  Behzad Hadiyan Ramin Hashemi Habibollah Akbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Optimization of the strain distribution in the roll forming process using the desirability function and finite element methods
  Siroos Ahmadi Vali Alimirzaloo Meysam Abdollahzade Gavgani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Upper bound and numerical analysis of cyclic expansion extrusion (CEE) process
  M. M. Samandari S.H.R. Torabi Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Simulation of Heat Transfer and Recrystallization in Aluminum Alloy AA 6070 by TIG Welding Method
  Mir Javad Mir Najd Gerami Eslam Ranjbarnodeh Mehdi Farajpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Plastic deformation analysis in parallel tubular channel angular pressing (PTCAP)
  Ghader Faraji Mahmoud Mousavi Mashhadia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Nonlinear bucking analysis of Polystyrene, Polyvinyl chloride, and Polypropylene cylindrical nano-composite shells reinforced by carbon nanotubes based on micro-mechanics and finite element methods
  Reza Hosseini-Ara Mohsen Akbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - A new approach for achieving excellent strain homogeneity in tubular channel angular pressing (TCAP) process
  Ghader Faraji F. Reshadi M. Baniasadia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Effect of Material Gradient on Stresses of Thick FGM Spherical Pressure Vessels with Exponentially-Varying Properties
  Mohammad Nejad Mahboobeh Gharibi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - New Iteration based Algorithm for Shape Optimization of Internal and External Boundaries of the Initial Blank in the Deep Drawing Process
  Hamidreza Gharehchahi Mohammad Javad Kazemzadeh-Parsi Ahmad Afsari Mehrdad Mohammadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Simulation of Plastic Deformation Behavior of Ti-6Al-4V Alloy by Finite Element Method
  E Amini F Madadi Sh Katani M Atapoor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results
  Hamidreza Gharehchahi Mohammad Javad Kazemzadeh-Parsi Ahmad Afsari Mehrdad Mohammadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process
  Hamidreza Gharehchahi Mohammad Javad Kazemzadeh-Parsi Ahmad Afsari Mehrdad Mohammadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - A Numerical Investigation the Effects of the Voltage on the Displacement and Stress of Copper-based Ionic Polymer-Metal Composites
  Hamid Soleimanimehr Amin Nasrollah
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Thermal and Stress Analysis in Butt, T-shaped and Tubular Joints in the Welding Process of Dissimilar Parts
  Adel Tavabe Behdad Jahanbeen Seyed Mohammad Reza Nazemosadat Ahmad Afsari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Evaluation of Stability and Reliability of Motorized Unilateral External Fixator, Designed and Simulated using Finite Element Method to Treat Bone Fractures and Bone Loss
  Alireza Bahramkia Mehran Fakhraie Salar Khajehpour Seyed Mohammad Tahami Raheb Gholami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Analytical, Experimental and Finite Element Investigation of Internal Pressure Effect in Hydroforming Process on Metallic Bellows Produced from Thin Wall Tube of Austenitic Stainless Steel Grade 316L
  Mehdi Arabbeigi Mehran Moradi Boozarjomehr Ghasemi Majid Sattar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - Using Rubber Pad Forming Process for Local Compression in Assembling of Vehicle Structure Tubes
  Meysam Darvishi Mohammad Sedighi Mehrdad Khandaie
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - The Optimization of the Effective Parameters of the Die in Parallel Tubular Channel Angular Pressing Process by Using Neural Network and Genetic Algorithm Methods
  Amin Armanian Hassan Khademi Zadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - Numerical Analysis of the Effect of Sinusoidal Pressure Path on Thinning of Tube in Hot Metal Free Bulging Process
  Ali Talebi Anaraki Mohsen Loh-Mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Finite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts
  Hamid Montazerolghaem Ali Delfani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Experimental Investigation and Analysis of Manufacturing Wind Turbine Blades Produced by Hydroforming of Aluminum Alloy AA5754
  Javad Shahbazi Karami Hamed Bakhtiarizade Mohsen Shahmoradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - A Novel Approach for Earthing System Design Using Finite Element Method
  Sajad Samadinasab Farhad Namdari Mohammad Bakhshipoor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Rotor Design and Analysis of 4/2 SRMs to Produce Continuous Torque using Finite Element Method
  Davood Karamalian Behrooz Majidi Mohammad Reza Yousefi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - Electromagnetic Force Analysis of Transformer on the Ferroresonance due to Consecutive 3–Phase Short–Circuit Faults Using Finite Element Method (FEM)
  Ali Ahmadpour SeyedJalal Seyed Shenava Abdolmajid Dejamkhooy Elham Mokaramian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Optimal Design, Modeling, and Evaluation of Single-Phase Axial Flux Induction Motor with a Permanent Capacitor Using Improved Particle Swarm Optimization Algorithm (IPSO)
  Amin Aboutalebi Najafabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Design and Torque Analysis of Double-Slot Surface and Spoke-Type BLDC Motor Using Finite Element Method
  Ali Esteki Behrooz Majidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - StatorCurrent Harmonics Evaluation by Flexible Neural Network Method With Reconstruction Structure During Learning Step Based On CFE/SS Algorithm for ACEC Generator of Rey Power Plant
  MR Yousefi Mohammad Teshnehlab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Modeling, Design and Analysis of a Electrodynamic Levitation System by Considering the Skin Effect
  Mohammad Rajabi Sabadani Abbas Najjar Khadabakhsh Ahmad Darabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - A Novel Approach for Eccentricity Fault Detection in Squirrel Cage Induction Motors
  Mehdi Ahmadi Javad Poshtan Seyed Mehdi MirImani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - A discussion about the efficiency of the modified element-free Galerkin method in static problems and the improvement
  ramin vafaeipoor Ali Zareh Alireza Alizadeh Majdi Fariba Behrouz Sarand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Study on behavior of Concrete Filled Double Skin Steel Tubular Under Torsion and Cyclic Loading
  Ahmad maleki reza khalili
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - Punching Shear in Fat Slabs and Suitable Methods to Prevent Shear Failure in Slabs
  javad ezati arasto Armagani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - Numerical Study of the Effect of Sacrificial RC Slab on the Performance of Underground Arc Shaped Structures under the Explosion Load
  seyyed safar saleh kutah esmaeil izadi zaman abadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - Numerical and Experimental Investigation of Multi-Perforated Steel Shear Wall Under Cyclic Loading
  Ali sahebjam Hossein shokati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - Investigation of the shear and torsional capacity and confinement of rectangular reinforced concrete beams with spiral stirrups
  hamed sefidian ashkan khodabandelou
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - Offering a New Computational Relationship to Evaluate the Bearing Capacity of the Strip Footing on the Two Frictional -Cohesive Layered Ground
  Loghman Rahimi navid ganjian Mikaiel Youssefzadehfard Mehdi Derakhshandi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - Finite element numerical modeling of geogrid-reinforced shallow foundation’s behavior on loose soils
  Morteza Alemyparvin
  10.30495/geotech.2020.679340
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - Numerical finite element modeling for earth-dam grouting and curtains wall design by Plaxis software
  Reza Poursalim Alireza Alizade Majdi
  10.30495/geotech.2020.679345
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - Deformations Analysis and Finite Element Numerical Modeling of Soil’s Excavations Improved by Soil Nailing
  Morteza Alemyparvin
  10.30495/geotech.2020.680482
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - Application of micro-pile for excavated trench dynamic stabilization by using three-dimensional finite element numerical method
  Leyla Hamedi Ali Sanaeirad
  10.30495/geotech.2020.680485
• Open Access Article
  • Abstract Page
  • Full-Text
  
  99 - Three-dimensional Finite Elements Numerical Modeling for Strip Foundations on Granular Soils Reinforced with Micro-piles
  Leyla Hamedi Ali Sanaeirad
  10.30495/geotech.2021.686314
• Open Access Article
  • Abstract Page
  • Full-Text
  
  100 - Numerical modeling and seismic behavior analysis of strip foundation on sandy soils
  Morteza Alemyparvin Mehdi Kouhdaragh
  10.30495/geotech.2022.692381
• Open Access Article
  • Abstract Page
  • Full-Text
  
  101 - The effect of different arrangements of longitudinal reinforcements on the capacity of wide concrete beams
  Javad Mahdian pari alireza faroughi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  102 - Study of Dynamic Infinite Element Used for Soil Structure Interaction
  Anand M. Gharad R. S. Sonparote
• Open Access Article
  • Abstract Page
  • Full-Text
  
  103 - بررسی انتشار ترک در مواد الاستیک خطی با در نظر گرفتن ضریب تصحیح مسیر ترک
  مهدی پورمحمود
• Open Access Article
  • Abstract Page
  • Full-Text
  
  104 - محاسبه غلظت تنش در اطراف یک سوراخ در یک لایه ترکیبی ترکیبی با استفاده از روش المان محدود
  پژمان تقی پور پدرام لورزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  105 - مدلسازی شبکیه چشم انسان در بیماران دارای گلوکوم
  افسانه صافدل کامران حسنی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  106 - بررسی پارامترهای موثر بر تنش و جا به جایی در ورق های موجدار متقارن محوری
  رضا سلامی ناصریان وحید کدخدایی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  107 - تحلیل استاتیکی، دینامیکی و ارتعاش آزاد ورق متخلخل مدرج تابعی با استفاده از تئوری تغییر شکل برشی مرتبه اول ورق
  کامران عاصمی سعید خبری مسعود بابایی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  108 - Study of Reduce Harmonic and Increasing Positioning Determination in Variable Reluctance Resolver with Area Couplings
  Roya Shmsali Hamid Lesani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  109 - Characterization of Electromagnetic Force of the Transformer During the Occurrence of a Ferroresonance Phenomenon by FEM
  Iman Rostami ahmad zare alireza shams saeid saberi firoozi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  110 - Prediction of Polymeric Insulator Leakage Current under Water Droplets Using Neural Network
  Zahra Ghiasi Faramarz Faghihi A.A. Shayegani Akmal
• Open Access Article
  • Abstract Page
  • Full-Text
  
  111 - Design Optimization for Total Volume Reduction of Permanent Magnet Synchronous Generators
  Reza Ilka Yousef Alinejad-Beromi Hossein Asgharpour-Alamdari Hamid Yaghobi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  112 - تحلیل عددی تاثیر پارامترهای ورودی بر ارتفاع بالج در فرآیند شکل‌دهی آزاد داغ لوله به وسیله گاز
  مهدی چوگان محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  113 - بررسی تأثیر طول و گام رزوه بر توزیع تنش در ایمپلنت‌ دندان و استخوان اطراف به کمک روش المان محدود
  مسیح فیروزبخت حامد عجبی نائینی مصطفی پیرمرادیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  114 - ارائه یک طرح جدید جهت اتصال لوله‌های آلومینیومی در سازه‌های زیر سطحی
  غلامرضا مزروعی علی حیدری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  115 - تحلیل عددی تاثیر فشار ضربانی برکاهش ضخامت در فرآیند شکل‌دهی آزاد داغ لوله به وسیله گاز
  علی طالبی انارکی محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  116 - Using finite element model in calculation of stress concentration factor around an elliptical hole in composite hybrid lamina
  Pedram Lorzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  117 - روش بهبود یافته المان محدود شبکه ثابت برای حل مسائل ارتجاعی سه بعدی مواد دارای خواص تابعی
  محمد جواد کاظم زاده پارسی فرهنگ دانشمند
• Open Access Article
  • Abstract Page
  • Full-Text
  
  118 - تأثیر هندسه شیار مورب U شکل بر نسبت مودها در مود ترکیبی I و II
  احسان براتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  119 - طرح ابتکاری مدل معادل برای شبیه‌سازی فرایند جوشکاری
  علی حیدری محمدرضا فروزان جعفر گلستانه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  120 - تحلیل عددی اثر فشار نوسانی بر بهبود شکل‌دهی در فرایند هیدروفرمینگ لوله های خمیده به روش اجزای محدود
  امیر خورسندی محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  121 - تشخیص معکوس حفره دایره‌ای د‌ر جسم دو بعدی با اندازه‌گیری‌های دمایی و شبکه عصبی مصنوعی
  محمد امین احمدفرد محمد جواد کاظم زاده پارسی علیرضا تهور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  122 - بررسی تاثیر مکان میله‏ های حلقوی در پره‏ های مرحله آخر توربین‏ بخار روی فرکانس‏های طبیعی آن
  مهدی نوذرپور عباس رهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  123 - تحلیل اجزاء محدود غیرخطی تنشهای ترموالاستیک دیسک دوار FGM با در نظر گرفتن وابستگی خواص مواد به دما
  مهرنوش دمیرچلی محمد آزادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  124 - مقایسه بین نتایج آزمایشگاهی، تئوری و اجزای محدود برای فرایند کشش سیم مسی
  محمد احمدپور حسن خادمی‌زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  125 - طراحی بهینه پروفیل قالب اکستروژن متقارن
  حسن نحوی مهدی حسن زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  126 - شبیه سازی عددی برخورد پرتابه‌های سرعت پایین با سطح آب
  نجمه خضرائیان ناصر دشتیان گرامی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  127 - Design and structural analysis of buckling and prestressed modal of an isogrid conical shell under mechanical and thermal loads
  Behrooz Shahriari Mahdi Sharifi Hassan Izanlo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  128 - Numerical and Experimental Analysis of Temperature Field, Deformation, and Residual Stress in Two-Stage Single-Pulse Sub-Powder Welding Joints
  Hamid Mozafari
  10.71762/dyhz-qx27
• Open Access Article
  • Abstract Page
  • Full-Text
  
  129 - An Improved Non-Overlapping Reluctance Resolver Under Eccentricity Faults
  Davood Karamalian Behrooz Majidi Mohamadreza Moradian Khoshnam Shojaei Sayyed Mohammad Mehdi Mirtalaei
  10.30486/TEEGES.2025.1126568
• Open Access Article
  • Abstract Page
  • Full-Text
  
  130 - Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy
  عصمت Behtari Poor M.M Moshksar رامین Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  131 - Root causes analyzed of leakage on the tank bottom using simulation cathodic protection
  Mohammad Houshmand Ali Davoodi Mehrdad Kashefi Torbati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  132 - Experimental and finite element analysis of hot backward extrusion process of vanadium microalloyed steel preform for determining optimum preheat temperature
  mohammad hoseyn Azarmi mohammad bayat majid belbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  133 - Determination of the flow field in the phenomenon of falling of sediment particles in near-stagnant water using the two-dimensional Burger equation solution with the fully implicit finite difference method
  Iman Rezaei M. واقفی Hossein Rahideh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  134 - Optimal placement of smart sensors for RCC dams structural health monitoring using Monte- Carlo
  Ali Shamsai Mohsen Ghaemian Hamid Reza Vosoughifar