List of articles (by subject) Journal of New Applied and Computational Findings in Mechanical Systems

---

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Proposing an alternative method for the design of air ductworks through coding in EES software
  Iman Zahmatkesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Optimization of the shell and tube heat exchanger with perforated quatrefoil plate using the meta-heuristic algorithms
  seyed iman hashemi marghmaleki hadi eskandari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Numerical study on nanofluid natural convection in a vacuum tube solar collector with phase change materials
  seyed Alireza Nazem Iman Zahmatkesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Multivariate Analysis of Variance (MANOVA) and Multivariate Regression in Determining Thermal Conductivity of Nanofluid for Use in Mechanical Systems
  Mohammad Reza Ghalani Moslem Barzegari Ashkan Ghafouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - The effect of volume fraction and size of Al2O3 nanoparticle on heat transfer and flow characteristics in the heat exchanger with louvered strip inserts
  Meysam Pouyanian Ashkan Ghafouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Analysis of strain and stress in composite layered plate using shear deformation theory and secant function
  Iman Najimi Saeed Jafari Mehrabadi Peyman Yousefi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Prediction of Residual Gas Consumption using Temperature and Population of ConsumersUse case : Residual Consumers of Karaj
  Masoud Akbari Mahdi Asghari Aliakbar Imami Satlou Parham Davari Shahnaz Salamat Thani Nahid Taherian Mansour Gholinejda
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Investigation of the Effect of Graphene-Silica Nanoparticles on Rheological and Thermo-physical Properties of Water-based Drilling Fluid
  Mohammad Gholamhosein zadeh Ashkan Ghafouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Thermodynamic analysis of two dual-purpose compression refrigeration systems with eco-friendly refrigerants in different climates
  Alireza Zarabadi Mostafa Mafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Performance prediction of a steam single-effect absorption chiller by the artificial neural network
  Farshad Panahizadeh Mahdi Hamzehei Mahmood Farzaneh-Gord
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Numerical analysis of effect of impingement plate on shell side fluid flow and heat transfer of inlet part of a shell and tube heat exchanger
  Peyman Mohammadian Mahdi Hamzei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Experimental study of the effect of silica nanoparticles on thermal and tribological properties of industrial lubricants
  Abbas Taghipoor Hasan Sabooei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Experimental investigation of cooling photovoltaic panels using phase change material at different angles
  maziar mirakhorlo Mehran Rajabi Zargarabadi mohammad sadegh valipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Investigation of increasing surface hardness of 316L stainless steel using amorphous aluminum phosphate coating
  tara bazdar Abdolmajid Eslami ahmad monshi Fatemehsadat Sayyedan Alireza Abbasloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - A review study on the ability of radial point interpolation meshless method in solving fracture mechanics problems
  Behrooz Ariannezhad Shahram Shahrooi Mohammad Shishesaz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Thechnical-economic evaluation of a Kalina cycle single phase geothermal power plant
  Sadegh Hatamipoor Navid Bozorgan Nadia Jalalifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - The Effect of Ferrule on Stress distribution in a Two-Rooted Maxillary First Premolar with Cast post and core; A Finite Element Study
  محمد شیشه ساز Reza Amirimoghadam Asadollah Ahmadzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Evaluation of hot crack sensitivity and mechanical properties of ER310 welding metal in 304 stainless steel welding joints by applying electromagnetic vibration
  mohammad amin ghadam dezfouli reza dehmolaei seyed reza alavi zaree
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Design and modeling of high-sensitivity plasmon multifunction optical-mechanical sensor based on thin metal grooves
  vali Pourhossein Hamed Saghaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Improving the efficiency of Triplex heat exchanger using Phase Change Materials
  Abbas kosarineia Amin Ziaeifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Power and weight optimization of spur gears using metaheuristics and finite element method
  Mohammad Sadeghi Ali Sadollah
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Performance analysis and optimization of 6-DOF Hunt type parallel robot
  erfan mirshekari َAfshin Ghanbarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Determine the stress intensity factor in a plate with a center crack under thermal and mechanical loading using isogeometric method based on the Bezier extraction operator
  Mohammad Mehdi Shoheib Peyman Yousefi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Management of energy consumption in buildings using renewable materials and new materials in hot and dry climates
  seyed esmaeil sadati saeed moghimi mahdi ezadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Presenting a new method to improve heat transfer in thermal cracking reactors of hydrocarbons
  ali mansouri mogharab Mehdi Ardjmand jafar towfighi farhad khorasheh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - The Application of Taguchi method in Optimization of Tool Flank Wear in High-Speed Machining
  ata Fardaghaie mehdi Jalali Azizpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Numerical investigation of heat transfer and Nanofluid flow in the pipe heat exchenger with V shape separator and middle fin
  Milad Mahmoodzadeh Ashkan Ghafouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Evaluating effect of material heterogeneity constants on stress intensity factors in the functional grated piezoelectric plate by using meshless local Petrov-Galerkin method (MLPG)
  Mohammad Moaddel shahram shahrooi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Bifurcation analysis of aircraft longitudinal motion at a high angle of attack
  Amirheshmat Khedmati Bazkiaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Investigation of corrosion behaviour of X70 microaloy steel in acidic environment in one molar sulfuric acid solution in the presence of benzomidazole and methyl benzomidazole
  مهدی بروجردنیا Mohammad Yazdizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Evaluation of heat transfer performance of two-phase nanofluid flow in a parabolic solar collector with eccentric absorber and solid insulation
  mojtaba jamiati Hossein Pourmohamadian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Numerical Simulation and the Effect of Rotational Speed on the Performance and Thickness of the Gas Film of Dry Gas Seal of the Centrifugal Compressor
  Navid Bozorgan Arash Ostovari Nadia Jalalifar Moosa Ghasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - A review on the effects of combined stress cracking defects in steels
  Reza Navidnezhad Shahram Shahrooei Erfan mirshekari Pejman Taghipour birgani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Investigation of the application of nanotechnology to increase the direct absorption of solar radiation
  mojtaba jamiati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Robust iterative learning control for rehabilitation robot in the presence of parametric uncertainty
  Mojtaba Ayatinia mehdi Forouzanfar Amin Ramezani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Temperature and smoke profile of fire in the parking of a commercial building with Pyrosim software
  Fatemeh Behbahani mahdi hamzei zahra mehrdoost mohammad moghiman
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Optimizing the cost of asphalt road pavement using particle swarm optimization algorithm (PSO) and compare it with the Shell method
  Mansour Tohidi Navid Khayat Abdoulrasoul Telvari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Optimization of energy consumption in methanol unit using pinch technology and modification of heat exchanger arrangement
  Payam Barzegar Amin Ahmadpour Hamid Kazemi Esfeh Mohammad Sharei S.M. Peyghambarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Analysis and simulation of temperature distribution on the roller body during the hot rolling process
  Amirheshmat Khedmati Bazkiaei Ali Sozangar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Investigating the speed and geometry of the mixer on the flow distribution in an industrial reactor
  Seyed mohammad hasan Mousavizadeh Mahdi Hamzehei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Theoretical and Numerical Study of ultrasonic guided waves reflection from corrosion defect in the pipe
  Pezhman Taghipour Birgani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Correction and improvement of the vibrations of air fans by increasing the Stiffness and changing the natural frequencies of the structure
  erfan mirshekari Bahman Poormohamad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Remaining useful life estimation of mechanical systems by mixed method of mathematical method and evolutionary computational framework
  fatemeh mehregan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Experimental Study of Interfacial Friction Factor and Shear Stress in Counter-current Two-phase Flow in a Vertical Pipe
  Arash Ghafouri Ashkan Ghafouri Abbas kosarineia Alireza Daneh-Dezfuli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Redesigning and implementation of the FDM 3D-Printer for Increasing Print Accuracy by reducing vibrations
  Omid Sarabi Farzad Cheraghpour Samavati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Crack detection in pressurized pipes using Harris hawk optimization method
  Afshin Fathi Hesam Makvandi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Free vibration and statistic analysis of composite sector spherical shells using isogeometric methodology
  Ali Hosseinzadeh mohammad reza forouzan younes Alizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Designing a wearable upper body exoskeleton mechanism with the aim of improving human movement performance
  Farbod Farzad Farzad Cheraghpour Samavati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Construction and implementation of a cooling system to increase the efficiency of photovoltaic panels using the half pipe method
  Ali Sharafi Ebrahim Aghajari Alireza Tavakoli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Investigation of Imidazole-Based corrosion inhibitor (PL-464) and corrosion behavior of X65 steel in Hydrochloric Acid
  mehdi borougerdnia Abbas Rajabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Comparing the organic Rankine and Kalina cycles to use the waste energy of the cascade refrigeration cycle to reduce power consumption
  Mohsen Mahdavi Adeli Seyed Omidreza Mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - A review of the effect of nano-lubricant additives on improving the tribological properties of lubricants
  Abbas Taghipoor
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Energy Analysis of a Cooling and Heating System for an Office Building
  Hossein Bagheri Abbas Kosarineia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Investigating the use of TiO2 and TiO2 microparticles waterproofed with nanotechnology in epoxy paint composite coatings on X52 steel
  Amir Kazemi Ahmad Menshi Mehdi Boroujerdnia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - مروری بر مطالعات پیشین بهبود عملکرد انتقال حرارت درون لوله دریافت کننده برج خورشیدی توسط تعبیه المان هایی درون لوله‌های دریافت کننده
  Hadi Farjadmehr Navid Bozorgan Alireza Daneh-Dezfuli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Intelligent Identification of Centrifugal Pump Damage by Combining Methods Independent Component Analysis and Particle Swarm Optimization
  Mohammad sadegh Aalaei Mehdi Shekarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - A novel method for magnetic stem cell delivery to the spinal cord injury using magnet combination
  majid poladian fatemeh mokhtari amir shamloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Numerical analysis of energy harvesting from an airfoil under concurrent base and flow excitations with nonlinear modeling
  Seyed Mostafa Mirtabaei Ali Kargozarfard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Dynamic modeling of a specific electro-pump liquid-propellant rocket
  Davoud Ramesh Hassan Naseh Hadiseh Karimaei Seyedeh Fatemeh Mirmohammadi Seyed Mohammad Javad Hashemi Homami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - The comparison of energy harvester performance of two degrees of freedom model in two different configurations with the base random excitation
  Amirheshmat Khedmati Bazkiaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - A review of experimental studies of heat transfer of nanofluids in laminar, turbulent and pool boiling flows
  Navid Bozorgan Nariman Bozorgan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Simulation of the autonomous robot control system in different geometric conditions of the pipe and the effect of the optimal torque distributor on the energy consumption of the robot
  Hosain Mashjoor Koresh Heidari Shirazi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Non-linear vibration analysis of circular nano-plate based on nonlocal strain gradient method
  morteza pourabdi Mohammad Shishesaz Shahram Shahrooi Seyed Alireza Seyed Roknizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Experimental Evaluation of the Effect of Pipe Inclination Angle on Minimum and Maximum Liquid Film Thickness in Two-Phase Flow
  Arash Ghafouri Ashkan Ghafouri Abbas kosarineia Alireza Daneh-Dezfuli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Effect of oil gallery on the piston thermo-mechanical stresses
  Hojjat Ashouri Afshin Afshari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Investigating Parameters Affecting the Performance of Hybrid Cooling Tower in Steam Power Plant
  Abbas kosarineia Atheer Abdel-Latif-Al-Doukhi-Zaki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Simulation of thermal stress in the hot rolling process and its effect on roller failure
  Amirheshmat Khedmati Bazkiaei Ali Sozangar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Particle swarm optimization in optimal control problems for Car on a constrained piecewise affine hill
  Ahmad Kia Kojouri Javad MashayekhiFard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Multiaxial fatigue analysis of exhaust manifold with considering viscosity stress
  Hojjat Ashouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - The effect of using air gaps in the walls on reducing the energy consumption of a residential building
  Seyed Ali Mousavi Navaee Ali Falavand Jozaei Ashkan Ghafouri Mohsen Mahdavi Adeli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Thermal performance enhancement of latent heat storage system using wavy fins and change in tube geometry
  Rahman Hamid zahra mehrdoost
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - investigating the effect of porosity Percentage on heat transfer in plastic injection molds created by selective laser melting
  Seyed mostafa MirTabaei Afshin Judaki Morteza Taher Niya
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Stress Analysis of Adhesively-Bonded Single-Lap Joints Based on a Three-Parameter Viscoelastic Foundation Model
  mehdi veisytabar Arash Reza Younes Shekari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Investigating the mechanical properties of the composite made of polypropylene and Conocarpus wood flour
  Amir Mohammadinia parizad sheikhi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - Investigating the performance of several frequency domain and time domain methods in calculating the dynamic parameters of a three-story structure using operational modal analysis
  Mohsen Mahdavi Adeli Hesam Makvandi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Design and analysis of a piezoelectric wind generator with an auxetic structure using the finite element method
  Morteza Sadi Hesam Makvandi AliAkbar Azemati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - Numerical investigation of the use of nanoparticles on the cutting surface quality and corrosion intensity in water jet cutting
  ahmad alavi حسن کاووسی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Analysis of cylindrical shell vibrations of MRI machine using finite element method.
  Hamid Reza Mortazavy Beni
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - A systematic review of analyzing the vibration modes of the cylindrical shell in the MRI machine to investigate the sound noise attenuation solutions
  Hamid Reza Mortazavy Beni
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - The analysis of free vibrations of a sandwich panel with a magnetorheological core and layers of functionally graded materials
  Farzad Shahryari Mehdi Shekarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Reduction of flow separation and overall drag of the NACA 4415 airfoil by creating grooves on it
  Seyed mostafa Mirtabaei