Thechnical-economic evaluation of a Kalina cycle single phase geothermal power plant
Subject Areas : Journal of New Applied and Computational Findings in Mechanical SystemsSadegh Hatamipoor 1 , Navid Bozorgan 2 , Nadia Jalalifar 3
1 - Khorramshahr Arvandan University
2 - Department of Mechanical Engineering, Abadan Branch, Islamic Azad University, Abadan, Iran
3 - Department of Chemical Engineering, Abadan Branch, Islamic Azad University, Abadan, Iran
Keywords: exergy destruction, Geothermal power plant, Kalina cycle,
Abstract :
[1] Li, Y., Liu, Y., Hu, B., & Dong, J., (2020), Numerical investigation of a novel approach to coupling compressed air energy storage in aquifers with geothermal energy, Applied Energy 279, pp 115-781.
[2] Chen, S., Zhang, Q., Andrews-Speed, P., & Mclellan, B., (2020), Quantitative assessment of the environmental risks of geothermal energy: A review, Journal of Environmental Management 276, pp 111-287.
[3] Habibollahzade, A., Houshfar, E., Ashjaee, M., & Ekradi, K., (2020), Continuous Power Generation through a Novel Solar/Geothermal Chimney System: Technical/Cost Analyses and Multi-Objective Particle Swarm Optimization, Journal of Cleaner Production, pp 124666.
[4] Rubio-Maya C., Martínez E., Romero C., Díaz V., Pacheco-Ibarra J., (2016), Techno-economic assessment for the integration into a multi-product plant based on cascade utilization of geothermal energy, Applied Thermal Engineering 108, pp 84–92.
[5] Ratlamwala T., Dincer I., (2013), Comparative efficiency assessment of a multi-flash integrated system based on three efficiency definitions, International Journal of Low-Carbon Technologies 8, pp 238-244.
[6] Shokati N., Ranjbar F., Yari M., (2015), Comparative and parametric study of double flash and single flash/ORC combined cycles based on exergoeconomic criteria, Applied Thermal Engineering 91, pp 479-495.
[7] Ghaebi H., Namin A., Rostamzadeh H., (2018), Exergoeconomic optimization of a novelcascade Kalina/Kalina cycle using geothermal heat source and LNG cold energy recovery, Journal of Cleaner Production 189, pp 279-296.
[8] Smith, R. and Smith R., (1995), Chemical process design . New York McGraw-Hill, pp 8-13.
[9] Cengel Y.A., Boles M.A., (2005),Thermodynamics an engineering approach: 5th ed. New York, McGraw-Hill Science.
[10] Liora, Noam., Zhangb, N., Energy0, (2007), exergy, and Second Law performance criteria, Energy 32, pp 281-296.
[11] Timo B., Morosuk T., Tsatsaronis G., (2017), Exergy-based evaluation of methanol production from natural gas with CO2 utilization, Energy141, pp 2528-2539.
[12] Ansarinasab H., Mehrpooya M., (2017), Evaluation of novel process configurations for coproduction of LNG and NGL using advanced exergoeconomic analysis, Applied Thermal Engineering 115, pp 885-898.
_||_