Optimization of the shell and tube heat exchanger with perforated quatrefoil plate using the meta-heuristic algorithms

Subject Areas :

seyed iman  hashemi marghmaleki ¹ (Senior Expert, Arundan Oil and Gas Company, Khorramshahr, Iran.)
hadi  eskandari ² (Member of faculty of Iran university of petroleum industry, Abadan, Iran.)

Received: 2022-12-23 Accepted : 2023-03-09 Published : 2023-02-20

Keywords: Genetic Algorithm, gray wolf algorithm, Single-Objective Optimization, Multi-Objective Optimization, Quatrefoil Perforated Plate,

Abstract :

In this research, the thermal and hydraulic characteristics of the shell side of the shell and tube heat exchanger with perforated quatrefoil plate are optimized by a gray wolf and genetic algorithms in a single-objective multi-objective manner. The objective functions are heat transfer capacity for the maximum value and pressure drop for the minimum value. Shell and tube heat exchanger variables for optimization are: the diameter and number of tubes, the Reynolds number, the distance between baffles, and the height of the quatrefoil hole. The results show that for the maximum heat transfer of the quatrefoil baffle, the tube diameter is 0.03 m, the number of tubes is 30, The Reynolds number is 20000, the height of the perforated hole is 0.0018 m, and the distance between the baffles is 0.15 m. For the lowest pressure drop value, the diameter of the tubes is 0.03 m for the square arrangement and 0.01 m for the triangle arrangement; the Reynolds number is 5000, the height of the perforated hole is 0.003 m, and the distance between the baffles is 0.25 m. The optimization by the gray wolf and genetic algorithms has the same results for the shell and tube heat exchanger with a quatrefoil baffle.

References:

[1]   Guo, W., Zhao, R., Hu, K., Huang, D., Zhao, Y., (2023), Two-phase refrigerant maldistribution and optimization design in novel alternatively-laminated-microchannel-tube (ALMT) heat exchangers with vertical headers. International Journal of Refrigeration.

[2]    Mohapatra, S., Das, D. K. Singh, A. K. (2023), Mechanical design of plate-fin heat exchangers for industry using social learning chaotic based Kho-Kho optimization. Annals of Nuclear Energy 181: p 109517.

[3]  Zhang, T., Chen, L., Wang, J., (2023), Multi-objective optimization of elliptical tube fin heat exchanger based on neural networks and genetic algorithm. Energy: p 126729.

[4]    Feng, Y., Xu, R., Cao, Y., Wu, X., Liang, C., Zhang, L., (2023), Optimization of H-type finned tube heat exchangers with combinations of longitudinal vortex generator, dimples/protrusions and grooves by Taguchi method. International Communications in Heat and Mass Transfer 143: p 106709.

[5]   Liu, P., Han, H., and Bao, Z., (2022), Multi-objective optimization of fuel–air tube-in-tube helical coil heat exchangers for cooled cooling air system applied in aeroengines. Aerospace Science and Technology 130: p 107933.

[6]  Zhu, K., Chang, Z., ,Li M., Sun, L., Li, S., Xu, H., Xu, M., ,Sang M., Ye, R., Han, R., (2023), Design, optimization and experimental testing of 2 K cryogenic plate-fin heat exchanger. Applied Thermal Engineering 223: p 119973.

[7]  Zaniewski, D., Klimaszewski, P., Klonowicz, P., Witanowski, Ł., Lampart, P., Jędrzejewski, Ł., Suchocki, T., (2023), Organic Rankine Cycle turbogenerator cooling–optimization of the generator water jacket heat exchange surface. Applied Thermal Engineering: p 120041.

[8]  Zhengyong, J., Mengjie, S., Chaobin, D., Yuyan, J., Pun, W. M., Hang, C. C. Y., (2023), Two mathematical models of flow boiling and flow instability in rectangular expanding microchannel heat exchangers and structure optimization.  Applied Thermal Engineering: p 120483.

[9]   Rao, R. V., and Majethia, M., (2022), Design optimization of shell-and-tube heat exchanger using Rao algorithms and their variants. Thermal Science and Engineering Progress 36: p 101520.

[10] Zhang, X., Han, D., He, W., Yue, C. Pu, W., (2017), Numerical simulation on a novel shell-and-tube heat exchanger with screw cinquefoil orifice baffles. Advances in Mechanical Engineering 9(8): 1687814017717665.

[11] Jena, S., Patro, P., Behera, S. S. (2013), Multi-objective optimization of design parameters of a shell & tube type heat exchanger using genetic algorithm. International Journal of Current Engineering and Technology 3(4): pp 1379-1386.

 [12] Wang, D., Wang, H., Xing, J., Wang, Y., (2021), Investigation of the thermal-hydraulic characteristics in the shell side of heat exchanger with quatrefoil perforated plate. International Journal of Thermal Sciences 159: 106580.