Experimental study of the effect of silica nanoparticles on thermal and tribological properties of industrial lubricants

Subject Areas : Journal of New Applied and Computational Findings in Mechanical Systems

Abbas Taghipoor ¹ ( Faculty member )
Hasan Sabooei ² ( Department of Mechanics, Dezful Branch, Islamic Azad University, Dezful, Iran. )

Received: 2021-05-19 Accepted : 2021-06-17 Published : 2021-05-22

Keywords: Wear, Silicon dioxide nanoparticles, Lubrication, Thermal conductivity,

Abstract :

Lubrication is one of the most effective ways to reduce friction and reduce the excess heat generated in a mechanical system. Identifying the right additive to improve lubrication properties by additives that have features such as accessibility and higher quality performance is important. The aim of this study was to investigate the effect of silicon dioxide (SiO2) nanoparticles with different concentrations as additives on the thermal and anti-wear properties of lubricants. For this purpose, nanoparticles with concentrations of 0.2, 0.4 and 0.5 wt% were combined with oil. Span 80 surfactant, ultrasonic bath and high speed agitator were used to disperse the nanoparticles into the base fluid and achieve a stable nanofluid. The static stability of nanofluids was also visually investigated. The obtained results showed that the addition of nanoparticles to the oil does not cause any change in its state and over time no sedimentation and phase change was observed, which indicates the very good stability of this nanofluid. In the last stage, wear tests, determination of friction coefficient and thermal conductivity coefficient were performed on the samples. According to the results, the lowest amount of disc wear was related to the lubricating mixture with a concentration of 0.5% by weight. The weight loss of the discs due to wear for this mixture was 60.76%, the reduction of the coefficient of friction was 15.07% and the increase of the thermal conductivity was 2.4% compared to the base oil.

References:

1- اتفاقی، ا.،. احمدی، ح.، رشیدی، ع.، محتسبی، س.، سلطانی، ر.، (1390)، بررسی تأثیر نانو ذرات روی خواص روغن‌موتور و میزان عملکرد آن در کاهش سایش، فصل‌نامه علمی پژوهشی تحقیقات موتور، سال 7 شماره 24، ص 12-3.

2- فرزین نژاد، ن.، حسنی راد، ج.، (1393)، مروری بر کاربرد فناوری نانو در روان کارها، پژوهشگاه صنعت نفت تهران، فصلنامه تخصصی علمی ترویج، دوره9 شماره 48، ص35-18.

3. Zhanga, X., Lia, Ch., Y.  Zhanga, Y., Wanga, Y., Lia, B., Yanga, M., Guoa, Sh., Liua, G., d Zhang. N., (2017),   Lubricating property of MQL grinding of Al₂O₃/SiC mixed nanofluid with different particle sizes and microtopography analysis bycross correlation, Precision Engineering, 47, pp 532-545.

4- زارع دثاری، ب.، عباس زاده، م.، داودی،  ب.، (1394)، بهبود روان کاری در فرآیند کشش عمیق با استفاده از افزودنی نانو ذرات، ماهنامه مهندسی مکانیک مدرس، سال 15 شماره ۱، ص 322-317.

5. Ahmed Ali, M.K., Xianjun, H., Mai, L., Qingping, C., Turkson, R.F., Bicheng. Ch., (2016), Improving the tribological characteristics of piston ring assembly in automotive engines using Al₂O₃ and TiO₂ nanomaterials as nano-lubricant additives, Tribology International, 103, pp 540-554.

6.Azman, N.F., Samion, S.,  Hakim Mat Sot, M.N., (2018),  Investigation of tribological properties of CuO/palm oil nanolubricant using pin-on-disc tribotester, Green Materials 6(1), pp 30–37.

7. Parasa, L.P., Maldonado-Cortesa, D., V. Kharissovab, O., Saldivara, K.I., Contrerasa, L., Arquietab, P., Castañosa, B., (2019), Novel carbon nanotori additives for lubricants with superior anti-wear and extreme pressure properties, Tribology International, 131, pp 488–495.

8. Rastogi, P.M., Kumar, R., Kumar, N., (2020), Effect of SiO₂ nanoparticles on the tribological characteristics of jatropha oil, Materials Today: Proceedings, Available online, https://doi.org/10.1016/j.matpr.

9. Aldana, P.U., Dassenoy, F., Vacher, B., Le Mogne, Th., Thiebaut, B., (2016), WS₂ nanoparticles anti-wear and friction reducing properties on rough surfaces in the presence of ZDDP additive, Tribology International, 102, pp 213-221.

10. Technicall Data Sheet British Petroleum (BP) - BP Transcal N – High Quality Heat Transfer Oil.

11. Nanomaterils Pioneers Company, Third unit. No51.Sadaf No.5.Vakil Abad Blv. Mashhad City, Khorasan Province, Iran.

12- تقی پور، ع.، (1398)، بررسی تجربی عملکرد ضد سایشی نانو روان کارها در گیربکس ماشین‌آلات دوار، دوماهنامه علمی پژوهشی مجله مهندسی ساخت و تولید ایران، دوره 6 شماره 2، ص 38-30.

13. Akinci, A., Sen, S., Sen, U., (2014), Friction and wear behavior of zirconium oxide reinforced PMMA Composites, Composites Part B: Engineering, 56,  pp 42-47.

14. Lee, G.J.,  Park, J.J., Lee, M.K., Rhee, Ch.K., (2017), Stable dispersion of nanodia., monds in oil and their tribological properties as lubricant additives, Applied Surface Science, 415,  pp 24-27.

15. Kaviyarasu, T., Vasanthan, B., (2015),  Improvement of tribological and thermal properties of engine lubricant by using nano-materials, Journal of Chemical and Pharmaceutical Sciences, 7,  pp 208-211.