Management of energy consumption in buildings using renewable materials and new materials in hot and dry climates

Subject Areas : Journal of New Applied and Computational Findings in Mechanical Systems

seyed esmaeil  sadati ¹ (semnan univercity)
saeed  moghimi ² (semnan univercity)
mahdi  ezadi ³ (semnan)

Received: 2022-01-25 Accepted : 2022-03-06 Published : 2022-02-20

Keywords: Energy efficiency, builder design, Renewable materials, climatic conditions,

Abstract :

Saving energy is one of the most important challenges in the world today. In recent years, growing concerns about the environmental consequences of energy consumption and global warming have doubled in importance. On the other hand, the share of the construction sector in the energy consumption of countries is significant and for this reason, in recent decades, in most industrialized countries, basic measures have been taken to improve consumption patterns, using various tools such as regulations. One of the most important energy consumed is electrical energy, which is one of the most basic energy sources of buildings and plays an important role. The complex problems and processes of electricity generation and transmission, the pollution generated by the production of fossil fuels, and other cases have prompted researchers to seek solutions to reduce energy consumption or, in other words, optimize energy consumption. In this study, some practical solutions to move towards energy saving have been investigated and the effect of using materials with different heat transfer coefficients in external walls according to Semnan weather conditions on the modeled building and to analyze the cooling and heating load of the building. Compared with renewable materials. Finally, the external wall, using a 20 cm straw block, has reduced the annual energy consumption compared to perforated pottery, autoclaved concrete, and Article 19 of the National Regulations has resulted in 3%, 0.6%, and 2.76%, respectively.

References:

[1] Heydari, A., Sadati, s., Gharib, m.,  (2021), Effects of different window configurations on energy consumption in building: Optimization and economic analysis, Journal of Building Engineering, 35:102099.

[2] Stephan, A., Robert, Crawford., Kristel, M., (2011), Towards a more holistic approach to reducing the energy demand of dwellings, Procedia Engineering, 21, pp 1033-41. 

[3] Capros, P., Mantzos, L., Papandreou, V., Tasios, N., (2008), European energy transport trends to 2030 – update 2007, in: Directorate-General for Energy and Transport, European Commission Brussels, April, pp 156-178.

[4] Andarini, A., Rahmi, R., (2014), The Role of Building Thermal Simulation for Energy Efficient Building Design, Energy Procedia, 47, pp 217-26.

[5] Hichem, N., Settou, N., Saifi, N., Damene, D., (2013), Experimental and Numerical Study of a Usual Brick Filled with PCM to Improve the Thermal Inertia of Buildings, Energy Procedia, 36, pp 66-75.

[6] Dabaieh, M., Omar, W., Hegazy, H., Erik, Johansson., (2015), Reducing cooling demands in a hot dry climate: A simulation study for non-insulated passive cool roof thermal performance in residential buildings, Energy and Buildings, 89, pp 142-152.

[7] Radhi, H., (2011), Viability of autoclaved aerated concrete walls for the residential sector in the United Arab Emirates, Energy and Buildings, 43, pp 86-92.

[8] Anastaselos, D., Oxizidis, S., Papadopoulos, A., (2011), Energy, environmental, and
economic optimization of thermal insulation solutions by means of an integrated decision support system, Energy and Buildings, 43,pp 686–694.

[9] Griego, D., Krarti, M., Hernández, A., (2012), Optimization of energy efficiency and thermal comfort measures for residential buildings in Salamanca Mexico, Energy and Building, 54, pp 540–549.

[10] سید اسماعیل ساداتی و همکاران، (1400)، تاثیر مقدار ضرایب هدایت حرارتی مصالح ساختمانی طبق مراجع مختلف در بار حرارتی و انتشار گاز دی اکسید کربن ساختمان، مجله مهندسی مکانیک و ارتعاشات

 [11] سید اسماعیل ساداتی و نادر رهبر،(1396)، بررسی تاثیر استفاده از مصالح مختلف ساختمانی بر میزان مصرف انرژی یک ساختمان نمونه با نرم افزار دیزاین بیلدردر شرایط اقلیم سمنان،سومین کنفرانس انتقال حرارت و جرم ایران

 [12] مبحث نوزدهم مقررات ملّی ساختمان،  (1389)، صرفه جویی درمصرف انرژی، دفتر امور مقررات ملّی ساختمان

[13] Giroudon, M., Laborel, A., Jean-Emmanuel, A., Magniont, C., (2019), Comparison of barley and lavender straws as bioaggregates in earth bricks, Journal of Construction and Building Materials, 202, pp 254–265.

[14] Software, Design Builder, Document help, In The US Department of Energy.

[15] Software, Energyplus, (2011), Energyplus Engineering Document help, In: The US Department of Energy.

[16] Stephan, A., Robert, H., Kristel, Myttenaere., (2011), Towards a more holistic approach to reducing the energy demand of dwellings, Procedia Engineering, 21, pp 33-41.