Numerical investigation of heat transfer and Nanofluid flow in the pipe heat exchenger with V shape separator and middle fin
Subject Areas : Journal of New Applied and Computational Findings in Mechanical Systems
Milad Mahmoodzadeh
1
(
Master student of Mechanical Engineering, Energy Conversion, Islamic Azad University, Ahvaz Branch, Iran
)
Ashkan Ghafouri
2
(
Department of Mechanics, Islamic Azad University, Ahvaz Branch, Ahvaz, Iran
)
Keywords: "Nusselt number", "Heat transfer", "Nanofluid", "Middle fin", "V-shaped separator",
Abstract :
[1] Masuda, H., Ebada, A., Teramae, K., Hishinuma, N., (1993) ., Alternation of thermal conductivity and
viscosity of liquid by dispersion Ultra-Fine particles ,Netsu Bussei,Scientific Research,7(4), pp 227-233.
[2] Buongiorno,J., (2006) ., Convective transport in nanofluids ASME Transactions Journal of Heat Transfer,
128 , pp 240-250.
[3] Jou, R., Tzeng, S., (2006) , Numerical research of nature convective heat transfer enhancement filled with
nanofluids in rectangular in enclosure,International Communication Heat and Mass Transfer, 33, pp 727-736.
[4] Pakravan, H. A., Yaghoubi, M., (2013) ., Analysis of nanoparticles migration on natural convection heat transfer of nanofluids ,International journal of Thermal Science, 68, pp 79-93.
[5]pak, B., and Cho. Y. I. , (1998) ., “Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particle, Exp. Heat Transfer”, 11, pp 151–170.
[6] Das, S. Putra, K., N. Thiesen, P. and Roetzel. W.(2003)., “Temperature dependence of thermal conductivity enhancement for nanofluids”, Journal of Heat Transfer, 125, pp 567-574.
[7] He; Y Jin; Y. Chen; H. Ding; Y. Cang, D. Lu, H. ,( 2007) “Heat transfer and flow behavior of aqueous suspensions of TiO2 nanoparticles (nanofluids) flowing upward through a vertical pipe”, International Journal of Heat and Mass Transfer, 50, pp 2272– 2281.
[8] Lotfi, R., Saboohi, Y., Rashidi, A. M., (2010) "Numerical study of forced convective heat transfer of Nanofluids: Comparison of different approaches", International Communications in Heat and Mass Transfer, 37(1), pp. 74-78.
[9] Farajollahi; B.. Etemad; S.Gh Hojjat, M. ,(2010) “Heat transfer of nanofluids in a shell and tube heat exchanger”, International Journal Heat and Mass Transfer, 53, pp. 12– 17.
[10]Kannadasan,N,Ramanathan,K,Sureh,S,(2012),Comparison of heat transfer and pressure drop in horizontal and vertical helically coiled heat exchanger with CuO/water based nano fluids,Experimental Thermal and Fluids Science,42, PP 64-70.
[11]Minghai Xu , Hui Lu , Liang Gong , Chai., John C. , Xinyue Duan(2016) “Parametric numerical study of the flow and heat transfer in microchannel with dimples”, Applied International Communications in Heat and Mass Transfer, 76,PP 348-357.
[12]Junmei Wu, Jiyun Zhao, Jiang Lei, Bo Liu, (2016) ., “Effectiveness of nanofluid on improving the performance of microchannel heat sink”, Applied Thermal Engineering,101, pp 402–412.
[13] Rui-jin Wang, Jia-wei Wang, Bei-qi Lijin, Ze-fei Zhu, (2018), “Parameterization Investigation on the Microchannel Heat Sink with Slant Rectangular Ribs by numerical simulation”,Applied Thermal Engineering, 50(50), pp 428-438.
[14]Faridi Khouzestani,R,Ghafouri,A,(2020) , Numerical study on heat transfer and nanofluid flow in pipes fitted with different dimpled spiral center plate, Journal SN Applied Sciences.2(2), pp 1-19.
[15]Rahimi Asl,R,Soltani,M,(2003), Computational fluid dynamics with the help of FLUENT software,Tarah, 1, pp1-448.
[16]Kotas, T. J., (1985), The Exergy Method of Thermal Plant Analysis. Butterworths, London, United Kingdom, 197.
[17] Fan, L. T. Lin S. T. and Azer, N. Z(1978). Surface renewal model of condensation heat transfer in tubes with in-line static mixers, Int. J. Heat Mass Transfer 21, pp 849-854.
[18] Jedsadaratanachai W., Boonloi A., (2017), Performance analysis and flow visualization in a round tube heat exchanger inserted with wavy V-ribs, Advances in Mechanical Engineering 9(9), pp 1–16.
[19] Suriya S. Uma Devis.Anjali Devi, ,S. P(2017) Heat transfer enhancement of Cu-al2o3/water hybrid nanofluid flow over a stretching sheet, Journal of the Nigerian Mathematical Society,.36(2), pp 419-433.
[20] Versteeg H. K. and Malalasekera, W., (1995). “An introduction to computational fluid dynamics,” The Finite Volume Method, Essex, Longman Sci. Tech., pp1-517.
[21] Abbasian Arani, A.A. , Amani, J. (2012), Experimental study on the effect of TiO2–water nanofluid on heat transfer and pressure drop, Experimental Thermal and Fluid Science 42, pp 107–115.