List of Articles sheet

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Surveying the Effect of Off-Balance Sheet Financing on Profitability Ratios
  Gh. , Talebnia F. Rahnamaye roodposhti Ch. Talebpoorasl
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Effect of the vacancy on the electrical transport properties of boron nitride nanosheets
  Neda Dehghan Mohammad Reza Niazian Mojtaba Yaghobi Mohammad Ali Ramzanpour
  10.57647/j.jtap.2023.1701.11
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Particle acceleration by three-dimensional asymmetric current sheet
  Zahra Akbari Mahboub Hosseinpour Mohammad ali Mohammadi
  10.57647/J.JTAP.2023.1703.33
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Evaluation the impact Off Balance Sheet Financing on sustainability profit and Economic Value Added of companies listed on the Stock Exchange of Tehran
  Askar Pakmaram Hamid Ghasemi Bahman Talebi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Deinking of Laser Printed Copy Paper by Chemical Different Treatments and Effect on Optical and Strength Properties of Paper
  A.A. Salari M. Ghasemi Kochameshgi A. Aminifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Dielectric Constant and Solvent Effect Investigafion on Listeria monoeytogenes In1B-13- sheet Conformation: an Al. initio-NMR study
  E. Shirkhodaee Tari M. Monajjemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Investigation of analytical and numerical solutions for one-dimensional independent-oftime Schrödinger Equation
  Z. Yousefian Molla Gh. Islampour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - An investigation on the nonlinear effects of monetary policy in the framework of the two channels of net worth and cash flow of the firms (Applying the panel quantile method)
  tanaz salahesh Alireza Kazerooni Hossien Asgharpur
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Accrual Quality Assessment Model in Banking Industry
  Gholamhossein Assadi Bahador Nayebi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Stagnation-point flow of a viscous fluid towards a stretching surface with variable thickness and thermal ‎radiation‎
  B. C. Prasanna ‎Kumara ‎‎G. K‎. ‎ ‎Ramesh‎ A. J. Chamkha‎ B. J. ‎Gireesha‎‎
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - MHD boundary layer heat and mass transfer of a chemically reacting Casson fluid over a permeable stretching surface with non-uniform heat source/‎sink
  B. J. Gireesha‎ B. Mahanthesh‎ M. M. Rashidi‎
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Two-phase Boundary Layer Flow, Heat and Mass Transfer of a Dusty Liquid past a Stretching Sheet with Thermal ‎Radiation
  K. L. Krupa ‎Lakshmi‎ B. J. ‎Gireesha‎ Rama S R Gorla B. Mahanthesh‎
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Dirichlet series and approximate analytical solutions of MHD flow over a linearly stretching ‎sheet
  Vishwanath B. ‎Awati‎ Mahesh Kumar ‎N‎ Krishna B. ‎Chavaraddi‎
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Preparation of Novel Thermo-sensitive Polymer/βCD/WS2 Nano-carriers for invitro Drug Release of Tamoxifen in the Presence and Absence of Near-Infrared (NIR) Laser
  Abbas Bohloli Maryam Daghighi Asli Elham Moniri Azar Bagheri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Preparation Electroanalysis Based on Sensor Nanosheets G-C3N4/CPE for Determination of Amount Hg2+ ion in Water Samples by Square Wave Anodic Stripping Voltammetry (SWASV) Method
  Shahnaz Davoudi Mohammad Reza Asghari Ganjeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - An Investigation on Dynamical and Mechanical Properties of Hybrid Composite of Epoxy Matrix Reinforced with Sglass Fiber and Aluminum Sheet
  k Kolahgar Azari A Alizadeh H Omidvar A Sayadi Kelemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Simulation of Steel Sheets Cold Rolling in Sticky Friction Conditions to Reduction of Scrap and Tools Wear
  Arab N
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - The Culture of Applying Auditing Standards in Managing Corporate Documents by Auditors: An Ethnographic Approach
  Zohreh Hajiha Saeedeh Fattahi Bafghi
  10.71907/sebaa.2025.1091
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Theoretical study of the doping effects of iron and titanium atoms on the adsorption behavior of carbon nanosheet
  Sara Ahmadi Hossein Raanaei Saeed Zarei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Numerical Investigation of Laser Bending of Perforated Sheets
  Mehdi Safari Mehdi Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Numerical Analysis of Circular Pre-notched U-Channel Section Distortions in Cold Roll-Forming Process
  S. Sattar S. Mazdak E. Sharifi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Experimental Investigation of Incremental Forming Process of Bilayer Hybrid Brass/St13 Sheets
  R. Ashouri H. Shahrajabian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Buckling Analysis of Orthotropic Annular Graphene Sheet with Various Boundary Conditions in an Elastic Medium
  Hamed Vahabi Mohammad Esmaeil Golmakani Ismaeil Mobasher
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Vibration Analysis of Different Types of Porous FG Circular Sandwich Plates
  Mohsen Rahmani Younes Mohammadi Farshad Kakavand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Dimensional and Geometrical Tolerance Analysis of Two Flexible Curved Sheet Metal Parts Assembly
  Parisa Omidvar Maryam Saryazdi
  10.30486/admt.2022.1934277.1295
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Identification of sexual education curriculum in the education system Iran
  zohreh ghalavand parvin samadi parvin ahmadi Narges Keshtiaray
  10.30486/jsre.2021.1886147.1533
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Modelling Mechanical Properties of AISI 439-430Ti Ferritic Stainless Steel Sheet
  N Brinis B Regaiguia O Chahaoui N Maatougui M.L Fares
  10.22034/jsm.2019.665911
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Multi-Objective Tabu Search Algorithm to Minimize Weight and Improve Formability of Al3105-St14 Bi-Layer Sheet
  M Ehsanifar H Momeni N Hamta A. R Nezamabadi
  10.22034/jsm.2019.1867430.1433
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - The Frequency Response of Intelligent Composite Sandwich Plate Under Biaxial In-Plane Forces
  A. A Ghorbanpour-Arani Zahra  Khoddami Maraghi Ali Ghorbanpour Arani
  https://doi.org/10.60664/jsm.2023.0031563
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Magneto-Rheological Response in Vibration of Intelligent Sandwich Plate with Velocity Feedback Control
  A Mihankhah Z Khoddami Maraghi A Ghorbanpour Arani S Niknejad
  10.22034/jsm.2020.1895149.1558
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Numerical and Experimental Research of Deep Drawing Process
  N Arab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Two New Non-AFR Criteria for Depicting Strength Differential Effect (SDE) in Anisotropic Sheet Metals
  F Moayyedian M Kadkhodayan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Investigation of the Effect of Pre-Stressed on Vibration Frequency of Rectangular Nanoplate Based on a Visco-Pasternak Foundation
  M Goodarzi M Mohammadi A Farajpour M Khooran
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Levy Type Solution for Nonlocal Thermo-Mechanical Vibration of Orthotropic Mono-Layer Graphene Sheet Embedded in an Elastic Medium
  M Mohammadi A Farajpour M Goodarzi R Heydarshenas
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Temperature Effect on Vibration Analysis of Annular Graphene Sheet Embedded on Visco-Pasternak Foundati
  M Mohammadi A Farajpour M Goodarzi H Mohammadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Closed-form Solution of Dynamic Displacement for SLGS Under Moving the Nanoparticle on Visco-Pasternak Foundation
  A Ghorbanpour Arani A Shiravand S Amir
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Theoretical, Numerical and Experimental Investigation on Formability of Al3105-St14 Two-Layer Sheet
  H Deilami Azodi R Darabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - An Upper Bound Analysis of Sandwich Sheet Rolling Process
  H Haghighat P Saadati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Nonlocal Bending Analysis of Bilayer Annular/Circular Nano Plates Based on First Order Shear Deformation Theory
  Sh Dastjerdi M Jabbarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Effect of Follower Force on Vibration Frequency of Magneto-Strictive-Faced Sandwich Plate with CNTR Composite Core
  M.R Ghorbanpour Arani Z Khoddami Maraghi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Non-Local Thermo-Elastic Buckling Analysis of Multi-Layer Annular/Circular Nano-Plates Based on First and Third Order Shear Deformation Theories Using DQ Method
  Sh Dastjerdi M Jabbarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Lateral Vibrations of Single-Layered Graphene Sheets Using Doublet Mechanics
  A Fatahi-Vajari A. Imam
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - The Analysis of the Existence of the Hypothesis of Adverse Selection on the Relationship between Off-balance Sheet Items and the Bank's Risk
  Ahmad Sarlak Fatemeh Johari
  10.22034/amfa.2016.526246
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Preparation of cyclodextrin functionalized graphene nanosheets and its application in electrochemical determination of imipramine
  Hossein Dastyar Elham Tavana Farshid Fasihi Seyed Esmaeil Moradi Fatemeh Farjami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Salt tectonics of Garmsar basin (north of central Iran)
  محسن Pourkermani Mahdi Nazarizadeh M.A GHorbani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Numerical and Experimental Analysis of Coil’s Number of Rounds and Voltage in Electromagnetic Sheet Forming of Aluminum Alloy 1050
  Sajjad Nadian Bersiani Ahmad Keshavarzi امین کلاهدوز
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Review of the Parameters Influence of Incremental Forming Between 1960 and 2019
  Mojtaba Hasanlu sina mokary
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Numerical and Experimental Investigation on the Formability of Sheet Metal Coated by hot dip Galvanizing Using TPIF Method
  Mojtaba Hasanlu
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - The reasons of expanding Shiite's rites in Al – Buid era
  Seddigheh Bayat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Free vibration analysisof soft-core composite-faced sandwich plates using three-dimensional finite element method
  Mohammad Mahdi Kheirikhah Hasan Aghabarati Pooneh Khosravi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Analysis of Masonry Infill Panels Retrofitted with FRP Sheets in R/C Frames
  Hosein Parastesh Murat Saatcioglu
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Construction of Intercultural Savoirs Through Interculturally-laden Tasks: An Iranian Experience
  داود کوهی سیده زهرا اسماعیلی ثریا بهروزی زاد
  10.30495/jal.2022.1963871.1426
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Application of near-infrared responsive nano-carrier for controlled drug delivery: synthesis, isotherm and kinetic studies
  Mohammadreza Mahdavijalal Homayon Ahmad Panahi Ali Niazi Atefeh Tamaddon Elham Moniri
  10.30495/ijbbo.2021.689781
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Forming limit curves of AA3105 on multiple temperature conditions: numerical investigation and experimental verification
  Behzad Hadiyan Ramin Hashemi Habibollah Akbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Modeling and production of high strength Al strips by equal channel multi angular pressing method
  Peyman Keshtiban Mohammad Zadshakouyan Ghader Faraji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Simultaneously Modeling and Optimization of Heat Affected Zone and Tensile Strength in GTAW Process Using Simulated Annealing Algorithm
  Meysam Beytolamani Masoud Azadi Moghaddam Farhad Kolahan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Ionic liquid-assisted synthesis, characterization and photocatalytic properties of SnO microflowers with nanosheet subunits
  Ashraf Sadat Shahvelayati masoomeh siminghad Shabnam Sheshmani Roya Ahmadi
  10.22034/jna.2019.1869561.1142
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Ionic liquid-assisted synthesis, characterization and photocatalytic properties of SnO microflowers with nanosheet subunits
  Masoomeh Siminghad Ashraf Sadat Shahvelayati Shabnam Sheshmani Roya Ahmadi
  10.22034/jna.2019.669635
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - The Effect of Paper Versus Online Worksheets on Iranian Young EFL Learners’ Vocabulary Learning
  Naghme Soltanpour Mansoor Ganji Amir Mohammadian
  10.52547/JFL.9.39.27
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Experimental Study of the Effect of Rotational Speed, Feed Rate, Lubricant and Tool Material in Friction Drilling of the Titanium Sheets
  Mehran Yazdani Nogarani Reza Nosouhi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Experimental Study of Shearing Dimensional Parameters in the Sheet Metal Blanking Process of StW24 Steel with a Thickness of 12 mm
  Farshid Ahmadi Amir Abdollahi Saeid Zamani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Investigation of Effective Plastic Strain Heterogeneity and the Effect of Using Interface Sheet in Constrained Groove Pressing of Copper Sheet
  Moein Gholami Ali Hasanabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Investigation of Springback Angle in Single Point Incremental Forming Process on Explosive Welded Cu/St/Cu Multilaye
  Mohammad Honarpisheh Mohammad Reza Ebrahimi Hadi Mansouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Formability Study of Steel Tailor laser Welded Blanks (TWB) in Stretch Forming
  Mohammad Riahi Ahmad Amini Hossein Bisadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Optimizing the Cutting of Inconel 718 Sheets with CO2 Laser by Particle Swarm Algorithm
  Saeid Kiani Rasoul Tarkesh Esfahani Zahra Zojaji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Investigation of The Behavior of Reinforced Concrete Columns with Rebars and Composite Plates for Different Installation Modes under Reciprocating Loading
  Ehsan Amiri Mohammadreza Baradaran
  10.30495/civil.2022.687805
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Investigation of the Factors affecting the Ductility of Steel Plate Shear Wall with Corrugated Sheet under Cyclic Loading
  Zaman Majidinia Kourosh Mehdizadeh Abbasali Sadeghi Seyede Vahide Hashemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Fe3O4@FSM-16-SO3H as a new magnetically recyclable nanostructured catalyst: synthesis, characterization and catalytic application for the synthesis of pyrano[2,3-c]pyrazoles
  Somayeh Hashemi-Uderji Mohammad Abdollahi-Alibeik Reza Ranjbar-Karimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Preparation and Characterization of WO3 Nanosheets and Au/WO3 Nanocomposite for Rabid Photocatalytic degradation of methylene blue dye
  Fatima Allawi Abdul Sajad Hanaa Egzar Mazin MAhdi
  10.30495/ijc.2023.1987426.2010
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - Study On Flow Erosivity Indicators for Predicting Soil Detachment Rate at Low Slopes
  Elham Sirjani Majid Mahmoodabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Check broadsheet Persian capital components sex novels
  شاپور بهیان مرجان زرندی پریرخ امامی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Investigation of Central Library and Documentation Center of Tehran University users’ rate of usage of Sheet List and Computer List
  Zahra Shiva Amin Zare Aref Riahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - FLORICAULA (FLO) insilico analysis in Saintpaulia ionantha H.Wendl
  mina kazemian elham mohajel kazemi Maryam Kolahi valiolah ghasemi
  10.30495/jdb.2023.1972705.1339
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Graphitic carbon nitride mesoporous nanosheets: Synthesis, characterization and investigation of optical and photocatalytic properties in comparison with bulk graphite carbon nitride
  Marzieh Khademalrasool Alireza Davoudi Yeganeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - The Effect of Accounting Quality on the Transmission of Monetary Policy based on the Balance Sheet Channel to the Stock Market
  Elham Malakzade Mohammad Ali Aghaei Mohammad Amri-Asrami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - مطالعه عددی و تجربی پدیده گوش‌واره‌ای شدن در کشش عمیق فنجان مربعی از ورق دولایه‌ی Al-Br
  محمدحسین محمودیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - Pattern of resolving non-performing demands of the Iranian banking system using the experience of other countries
  Hadi Rahmani Fazli
  https://doi.org/10.71818/ecj.2024.1062097
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Balance-Sheet Management in a Development Bank Based on Math Word Problems
  s.z Aboalhasani Kumleh فریدون Rahnamay Roodposhti Ahmad Shahvarani فرهاد Hosseinzadeh Lotfi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - بررسی تاثیر عملیات حرارتی بر خواص ریزساختاری ورق سه لایه آلومینیوم منیزیم- آلومینیوم خالص- فولاد زنگ نزن
  داوود میراحمدی ابوالفضل غلام زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets
  Mahsa Mokhtarian Azam Gasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Investigation of forming process of the floor of Volvo truck’s body via FEM simulation
  Mohammad Sajjad Mahdieh Farshad Nazari Hussam Yuness  Mane’
  10.71939/jsme.2024.1092092
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - بررسی اثر سرعت لیزر در خمش ورق فلزی توسط لیزر با استفاده از تحلیل عددی و تجربی در مکانیزم گرادیان حرارتی
  حسن مسلمی نائینی ولی اله پناهی زاده محمد حسین پور گللو سیامک مزدک
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - بررسی بار بحرانی کمانش ورق ترک دار به دو روش تجربی و عددی
  دانیال شیخی محمدمهدی نجفی زاده علیرضا نظام آبادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - کمانش خطی وغیرخطی صفحات دایروی/حلقوی گرافن ارتوتروپیک به کمک ﺗﺌﻮری اﻻﺳﺘﯿﺴﯿﺘﻪ ﻏﯿﺮﻣﻮﺿﻌﯽ
  مصطفی صادقیان مهرداد جبارزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - خمش ورق گرافن قطاعی بروی پایه الاستیک وینکلر-پسترناک به کمک تئوری الاستیسیته غیرموضعی بروش کانتروویچ توسعه یافته
  شهریار دستجردی مهرداد جبارزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Analysis of Bending and Buckling of Circular Porous Plate Using First-Order Shear Deformation Theory
  A.R. Yadegari Naeini Yadegari Naeini A. Ghasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - ارتعاشات دو صفحه گرافنی حاوی ذره، کوپل شده توسط محیط الاستیک بر اساس تئوری های کلاسیک و میندلین با در نظر گرفتن اثرات سطح
  محمد هاشمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - Effect of Using Mobile-based Online Assignments on Grammar Test Performance among Iranian Elementary EFL Learners
  Maryam Zaman Sani Shila Kheirzade
  10.71673/relp.2025.1104881
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Drivers of sub-line items in Iranian banks
  seyed amir safavi ghomi Maryam  Khalili Iraqi حمیدرضا وکیلی فرد
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - Optimizing synthesis parameters of silver nanowires by polyol method
  Sayed Ahmad Hashempour Cheshmegol Ali Mashreghi
  10.30495/jnm.2022.29577.1948
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - analysis of plastic instability during sandwich sheet rolling
  حامد ثابت شهرام خیر اندیش شمس الدین میر دامادی مسعود گودرزی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - Graphene nanosheets film by plasma electrolysis deposition
  A. Habibi S. M. Mousavi Khoei F. Mahboubi A. Khakzad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method
  V. Ali mirzaloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process
  M.R. sakhtemanian M. honarpishe S. amini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - Carbon Monoxide Gas Sensor Based on ZrSe2 monolayer nanosheet
  Soroush Karimi Khorrami Masoud Berahman Mojtaba Sadeghi
  10.30495/jopn.2022.29652.1250
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - Investigation of optical and structural properties of iron oxide nanostructures synthesized by co-precipitation method
  Mostafa Arjomandi Lari saeed parhoodeh Ghader Alahverdi Ali Rohani Sarvestani
  10.30495/jopn.2022.29928.1257
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - Investigating the feasibility of using P2SiS, As2GeSe and As2GeTe nanotubes in the new generation of transistors
  Parvin Behzadi
  10.71508/crn.2024.140307081185456
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - Investigating Crack Growth Behavior in Alu-Bond Composite Sheets and Repairing with Composite Patch Connections
  Hamid  Mozafari Mojtaba Moravej
  10.71762/yw89-3691