Two New Non-AFR Criteria for Depicting Strength Differential Effect (SDE) in Anisotropic Sheet Metals

Subject Areas : Engineering

F Moayyedian ¹ , M Kadkhodayan ²

1 - Department of Mechanical Engineering, Eqbal Lahoori Institute of Higher Education, Mashhad, Iran
2 - Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran

Received: 2017-09-11 Accepted : 2017-12-11 Published : 2018-03-01

Keywords:

References:

[1] Spitzig W.A., Richmond O., 1984, The effect of pressure on the flow stress of metals, Acta Metallurgic 32)3(: 457-463.
[2] Liu C., Huang Y., Stout M.G., 1997, On the asymmetric yield surface of plastically orthotropic materials: a phenomenological study, Acta Metallurgica 45(6): 2397-2406.
[3] Barlat F., Brem J.C., Yoon J.W., Chung K., Dick R.E., Lege D.J., Pourboghrat F., Choi S.H., Chu E., 2003, Plane stress yield function for aluminum alloy sheets-part 1: theory, International Journal of Plasticity 19: 1297-1319.
[4] Stoughton T.B., Yoon J.W., 2004,A pressure-sensitive yield criterion under a non-associated flow rule for sheet metal forming, International Journal of Plasticity 20: 705-731.
[5] Hu W., Wang Z.R., 2009,Construction of a constitutive model in calculations of pressure-dependent material, Computational Material Sciences 46: 893-901.
[6] Hu W., 2005, An orthotropic criterion in a 3-D general stress state, International Journal of Plasticity 21: 1771-1796.
[7] Aretz H., 2009, A non-quadratic plane stress yield function for orthotropic sheet metals, Journal of Materials Processing Technology 36: 246-251.
[8] Lee M.G., Wagoner R.H., Lee J.K., Chung K., H.Y. Kim, 2008,Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets, International Journal of Plasticity 24: 545-582.
[9] Stoughton T.B., Yoon J.W., 2009,Anisotropic hardening and non-associated flow in proportional loading of sheet metals, International Journal of Plasticity 25: 1777-1817.
[10] Hu W., Wang Z.R., 2005, Multiple-factor dependence of the yielding behavior to isotropic ductile materials, Computational Materials Science 32: 31-46.
[11] Huh H., Lou Y., Bae G., Lee C., 2010, Accuracy analysis of anisotropic yield functions based on the root-mean square error, AIP Conference Proceeding of the NUMIFORM, Pohang, Republic of Korea.
[12] Moayyedian F., Kadkhodayan M., 2013,A general solution for implicit time stepping scheme in rate-dependant plasticity, International Journal of Engineering 26(6): 641-652.
[13] Lou Y., Huh H., Yoon J.W., 2013,Consideration of strength differential effect in sheet metals with symmetric yield functions, International Journal of Mechanical Sciences 66: 214-223.
[14] SafaeiM., Lee M.G., Zang S.L., WaeleW.D., 2014, An evolutionary anisotropic model for sheet metals based on non-associated flow rule approach, Computational Materials Science 81:15-29.
[15] Yoon J.W., Lou Y., Yoon J., Glazoff M.V., 2014, Asymmetric yield function based on the stress invariants for pressure sensitive metals, International Journal of Plasticity 56: 184-202.
[16] Safaei M., Yoon J.W., Waele W.D., 2014, Study on the definition of equivalent plastic strain under non-associated flow rule for finite element formulation, International Journal of Plasticity 58: 219-238.
[17] Moayyedian F., Kadkhodayan M., 2014,A study on combination of von Mises and Tresca yield loci in non-associated viscoplasticity, International Journal of Engineering 27: 537-545.
[18] Oya T., Yanagimoto J., Ito K., Uemura G., Mori N., 2014, Material model based on non-associated flow rule with higher-order yield function for anisotropic metals, Procedia Engineering 81: 1210-1215.
[19] Moayyedian F., Kadkhodayan M., 2015,Combination of modified Yld2000-2d and Yld2000-2d in anisotropic pressure dependent sheet metals, Latin American Journal of Solids and Structures 12(1): 92-114.
[20] Moayyedian F., Kadkhodayan M., 2015, Modified Burzynski criterion with non-associated flow rule for anisotropic asymmetric metals in plane stress problems, Applied Mathematics and Mechanics 36(3): 303-318.
[21] Ghaei A., Taherizadeh A., 2015, A two-surface hardening plasticity model based on non-associated flow rule for anisotropic metals subjected to cyclic loading, International Journal of Mechanical Sciences 92: 24-34.