List of Articles hardness

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Influence of argon gas flow on mechanical and electrical properties of sputtered titanium nitride thin films
  Kaykhosrow Khojier Hadi Savaloni Ebrahim Shokrai Zohreh Dehghani Naser Zare Dehnavi
  10.1186/2251-7235-7-37
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Investigation of stand-off distance effect on structure, adhesion and hardness of copper coatings obtained by the APS technique
  Goudarzi Masoumeh Saviz Shahrooz Ghoranneviss Mahmood Salar Elahi Ahmad
  10.1007/s40094-018-0277-0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - The investigation of the microstructure behavior of the spray distances and argon gas flow rates effects on the aluminum coating using self-generated atmospheric plasma spray system
  Sh. Khandanjou M. Ghoranneviss Sh. Saviz
  10.1007/s40094-017-0256-x
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Effect of Solvent polarities on the molecular properties of 2-(2-nitrovinyl) furan
  Moriam Adeoye KAZEEM ALABI Ibahim Abdulsalaami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Investigation of relationship with electron configuration of chemical hardness, absolute electronegativity and electrophilicity
  Savas, Kaya Cemal Kaya
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Derivation of ionization energy and electron affinity equations using chemical hardness and absolute electronegativity in isoelectronic series
  S. Kaya C. Kaya
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Computational study of chemical properties of Captopril drug and the connected form to Fullerene (C60) as a medicine nano carrier
  Roya Ahmadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - The Effects of Vacuum Cooling on Some Physico-chemical and Microbiological Properties of Shortened Cake
  M. Malmir B. Ghiassi Tarzi G. H. Assadi H. Mirsaeed Ghazi B. Delkhosh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Development of Traditional Date Cookie Formulation Using Pumpkin Puree
  S. Kia S. H. Hosseini Ghaboos
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Efficiency Measurement in Two-Stage Network Structures Considering Undesirable Outputs
  AR. Amirteimoori عباس طلوعی اشلاقی M. Homayounfar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - ادله عقلی و نقلی تعیین ملاک مسافت شرعی در فقه امامیه
  mahdi Mahdavi e amin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Investigation of the Effect of Volume Fraction of Martensite and Different Tempering Conditions on the Microstructure and Mechanical Properties of St52 Dual-Phase Steel Used in the Automotive Industry
  M Shahverdi B Karbakhsh Ravari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - The Effect of Electroplating Time on Microstructural Properties and Hardness of Silver Coating on C10100 Alloy
  A. Taherkhani Y. Shajari K. Mirzavand A. Mellatkhah Z. S. Seyedraoufi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - The Effect of Cooling Rate on the Microstructure and Mechanical Properties of the Plastic Injection Molds
  Z. S Seyedraoufi M Samiee F Abdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Effect of Heat Treatment on the Intermetallic Compounds and Mechanical Properties of Explosive Weld Interface of three Al 5083, Al 1050 and St 1515 Layers
  Bakhtiari H Mokhtariniya F Khanzadeh M. R Farvizi M
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - The Effect of Cooling Rate on the Solutionizing of IN718 Superalloy Produced via Selective Laser Melting (SLM) Method
  H. H. Dastgerdi M. O. Shabani Y. Shajari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - The Effect of the Amount of Ferrous Sulfate in the Electrolyte on the Hardness of the Ni-Fe Alloy Coating Generated by Electrical Deposition Method
  A Aghajafari M Noghani M Saghafi B Bostani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Effects of Shielding Gas on the Depth, Width and Hardness of 17-4PH Stainless Steel during TIG Welding
  S, M Hosseini Farzaneh M Belbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Prediction Micro-Hardness of Al-based Composites by Using Artificial Neural Network in Mechanical Alloying
  R, M Babaheydari S, O Mirabootalebi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Investigation on the Effects of Explosive Welding Parameters on the Mechanical Properties and Electrical Conductivity of Al-Cu Bimetal
  H Bakhtiari H Abbasi H Sabet M. R Khanzadeh M Farvizi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Investigating the Porous Coating Produced on 6061 Aluminum Alloy in Sulfuric Acid Electrolyte at Different Temperatures
  M Razazi Boroujeni H. F. M Alyazee
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Optimizing Friction Stir Welding Process for Enhancing Strength and Hardness using Taguchi Multi-Objective Function Method
  Sajjad Khaki Ali Heidari Amin Kolahdooz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Investigating the Effect of Manganese Content on the Properties of High Manganese Austenitic Steels
  Seyyed Amin Torabi Kamran Amini Masab Naseri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Effect of the Number of Welding Passes on the Microstructure and Wear Behavior of St52 Plain Carbon Steel Coated with a High Chromium-Carbon Electrode
  Mohsen Barmaki Kamran Amini Farhad Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Strength Improvement of Nano-Structured Titanium Processed by Parallel Tubular Channel Angular Pressing
  Ali Amani Hamid Soleimanimehr Shahram Etemadi Haghighi Farid Biniyazan
  10.30486/admt.2022.1942680.1318
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Effect of applied current density on microhardness and corrosion behavior of electrodeposited Co-P-ZrO2-CeO2 nanocomposite coatings
  Fatemeh Borzooei Sirus Javadpour Alireza Jahanbin Hamed Aghili mehdi nasrollahi nezhad fard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - A computational study on Gauche Effect of C8H15O-X (X: OH, NH2, CH3) Conformers
  Ghazaleh Kouchakzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Investigation of increasing surface hardness of 316L stainless steel using amorphous aluminum phosphate coating
  tara bazdar Abdolmajid Eslami ahmad monshi Fatemehsadat Sayyedan Alireza Abbasloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Environmantal geology and assess groundwater quality in Alut area (Kurdestan Province) with help of hydrochemical parameters
  SeyedVahid Shahrokhi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Simulation and study of the effect of variation in carbon and manganese elements on steel 1050 heat treatment (quenching) using AC3 software
  Mehdi Rafiei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - On the fabrication and characterization of Al5083/Al2O3 surface nanocomposite via friction stir processing
  Akbar Heidarpour Saeed Ahmadifard Shahb Kazemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling
  Minoo Karbasi Maryam Karbasi Ali Saidi Mohammad Hossein fathi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Modeling and optimization of precipitation hardening heat treatment factors of Al2024 alloy using a two-level full factorial design
  Maryam Moazeni Ali Ashrafi Ali Zeinal-Hamadani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Effect of N2 partial pressure on the structural and mechanical properties of TaN films
  mehdi manouchehrian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Effect of Ni-P electroless coating and heat treatment on tribological and corrosion properties of copper substrate
  masoud soltani Ali Shafyei Kianoush Zarrin naghsh Reihane Aliramezani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Investigation on High Temperature Wear Resistance of Cryotreated Hot Work Tool Steel
  Iman Ebrahimzadeh Farhad Gharavi کامران امینی zahra Ghorbani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Tribological Properties of Al2024-2wt.%TiO2 Nanocomposite Produced by Mechanical Alloying and Hot-Pressing
  Hamid Ashrafi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method
  Danial Davoodi Amir Hossein Emami Sayed Mahmoud Monir Vaghefi Mahdi Omidi Hamid Reza Bakhsheshi-Rad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties
  Mohammad reza Maraki Masoud Mahmoodi Milad Khodaei Hadi Tagimalek
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Influences of Bath Stirring Rate on Synetics of Nano Composite Ni-SiC-Gr Coatings on St37 via Electrodeposition Process
  M Rostami R Ebrahimi-Kahrizsangi A Saatchi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Investigation of enamel surface hardness using remineralization of white spot lesions with CPP-ACP, fluoride, and CPP-ACPF
  Farzaneh Shirani Shirin Rostami Parastoo Afghari
  10.22034/jna.2022.1951362.1290
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Experimental Investigation of the Effects of the Roller Burnishing Parameters on the Surface Roughness and Micro-hardness of Ti6Al4V Alloy
  Mohammad Asadbeiki Reza Nosouhi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Impact of FSP Tool Probe Shape on Reinforcing Particles Dispersion in the Piston Alloy Using CEL Approach
  Mostafa Akbari Hossein Rahimi Asiabaraki Ezatollah Hassanzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Microstructural and Mechanical Characterization of Friction Stir Processed Aluminum Alloy 6061-T6 Reinforced with Zirconium-Silicate Particles
  Zohrheh Ebrahimi Moslem Sarikhani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Analysis of Surface Roughness and Micro-hardness in Roller Burnishing of Aluminum Alloy 6061
  Amin Poursafar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Investigating the Effect of Titanium Addition on the Microstructure and Mechanical Properties of Ni-Hard 4 Cast Iron
  Masoud Bahrami Alamdarlo Kamran Amini Vahid Nemati Najafabadi Mahyar Mohammadnezhad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Effect of Overage Hardening Heat Treatment on the Micro Structure and Hardness of Nickel-based Super Alloy Rene-80
  Mahmoud Moradi Mohammad Meghdad Fallah Fallah Mahdi Kazazi Mahdi Vahdati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - The Effect of Annealing Heat Treatment on the Bond of Explosivewelded Copper/Steel after the ECAR Process
  Mohammad Honarpisheh Ali Akbar Haddadi Hadi Mansouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Study on the Wear of Hardened Opener Shares of the Grain-Fertilizer-Grass Seeder
  Sayakha Orazovich  Nukeshev Dimitar P. Karaivanov Nikolai N. Romanyuk Dinara Kossatbekova
  10.82374/jiei.2025.1039530
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Evaluation the Resistance of Almond to Frost in Controlled and Field Conditions
  A Imani M Ezaddost F Asgari S. H Masoumi I Raeisi
  10.22034/jon.2012.515728
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - The Substituent Effects on Chemical Reactivity and Aromaticity Current of Ritalin Drug
  Arezoo Tahan Mahya Khojandi
  10.22034/jchr.2021.1929266.1303
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Investigation the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded AZ31 magnesium alloy
  AMIN ABDOLLAHZADEH Ali shokouhfar حمید امیدوار محمد علی صفرخانیان محمدرضا نادری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Nickel-cobalt matrix reinforced with silicon oxide nanoparticles nanocomposte coating prepared by direct current electrochemical deposition method
  سیاوش ایمانیان علی شکوه فر حامد بخشی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - A Study on Effect of Processing Parameters on Electrical Conduction and Micro-hardness of Nano-crystalline Cu-5%at Ta Alloy.
  Roohollah Rahmanifard mohsen asadi asadabad سید میثم جاویدان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - The effect of silicon doping on the mechanical and corrosion properties of tantalum carbide coating deposited by magnetron sputtering technique
  Seyyed Alireza Hosseini Minasadt Emamian Mostafa Alishahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - A study of hardness and wear properties in the powder hard covering established in the Fe- Cr –C- Mo system on the carbonic simple steel by GTAW welding method
  Mohammad Mehdi Ghaffari Hossein Paydar محمدرضا خانزاده قره‌شیران
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Study the microstructure and hardness of FSW of API 70 steel at the presence of TiO2 particles
  Rasoul Pouriamanesh KAMRAN Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Investigation of Microstructure, Hardness and Intermetallic Compound in Friction stir Welding of AA6065 Aluminum Alloy to Copper
  مجید الیاسی Rahim Narimani Mortza Hosseinzadeh Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Friction Stir Welding of Ultrafine-Grained Al 1050: Investigation of Pin Geometry, Welding Atmosphere Temperature and Welding Speeds on the Mechanical Properties
  Morteza Hosseini Habib Danesh-Manesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Effect of Temperature, Voltage, Time of Anodizing and Applying Nickel-Phosphor Electro less Coating on Hardness and Corrosion Behavior of 2024 Aluminum Alloy
  masoud soltani Ali Shafyei Reyhane Alliramezani Saeed Akhavan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Improvement of Load Bearing Capacity of Al-1100 Joining area by using In-situ Synthesizing of Al/Cr during FSSW
  سعید مطلبی فشارکی مسعود مصلایی پور علیرضا مشرقی سید صادق قاسمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - The effect of parameters of pulse Electrodeposition and post annealing on properties of Cobalt-tungsten alloy coating
  سمیه اباذری سیوندی سعید رستگاری شهرام خیراندیش
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Evaluating the effect of deep cryogenic heat treatment on microstructure, wear and tension properties of the GOST9HF-steel at tempering temperature from 150 to 650˚C
  kamran amini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Phase transformations during high temperature brazing of dissimilar bonding of IN738 to TiAl intermetallic compound using Ni-Si-B ternary filler alloy
  Dariush Kokabi Ali Kaflou Majid Pouranvari Reza Gholamipour
  10.30495/apme.2021.681602
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - The effect of Al2O3 Nano-particles coated with manganese oxide on the microstructure and mechanical properties of low carbon steel using GMAW process
  farzad pahnaneh masood aghakhani farid naeimi , Moeen Mansoubi
  10.30495/apme.2021.681628
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Influence of pH of Electroplating on Microstructure and Mechanical Properties of Ni-P-Tio2 Composite Coating Fabricated on AISI 430 Steel
  Mina Afzali Grouh Morteza Zandrahimi Hadi Ebrahimifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - The Effect of IN718 Superalloy Swarf Machining Addition and Normalizing on the Microstructure and Mechanical Properties of Hypereutectic Gray Cast Iron Produced by Lost Foam Method
  Mehdi Ranjbar سید حسین رضوی zahrasadat seyedraoufi
  10.71753/ma.2024.1089870
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Investigating the Effect of Tungsten Element on the Microstructure and Mechanical Properties of Fe-C-Ni Hard Coating
  Adel Mosadeghian hamid nazemy Mohammadreza Khanzadeh Gharahshiran Mansor SadeghiNasb
  10.30495/apme.2021.564781.1768
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Investigation of the Effects of HVOF Process Parameters on the Quality and Wear Properties of the Coating Tungsten Carbide on 4130 Steel
  Javad Ansari Amirhossein Moghanian Morteza Saghafi Yazdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - Using of RSM to optimize the heat treatment of electroless Ni-P coating for simultaneously improvement in corrosion resistance and hardness
  Jvad Golab Mostafa Alishahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - ارائه آزمون آزمایشگاهی جدید برای تعیین انرژی و قابلیت خردایش خوراک آسیای مجتمع مس سرچشمه
  محمد رزانی ابوالفضل معصومی مسعود رضایی زاده محمد نوع پرست
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - The effect of physical and mechanical properties on the abrasion resistance of artificial stones produced with granite waste
  Seyyed Mohammad Javad Mousavi Reza Abedinzadeh Mohammad Reisi
  10.71939/jsme.2023.1091984
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - بهبود ریزساختار و خواص مکانیکی آلیاژ آلومینیم A356 به روش کامپوکستینگ
  اسماعیل دماوندی سلمان نوروزی سید محمود ربیعی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - بررسی پارامترهای حاکم و بهینه‌سازی سختی مذاب در حال انجماد آلیاژ آلومینیوم A380 تولید شده به روش ارتعاش مکانیکی
  سعید احترامیان حقیقی امین کلاه دوز مجید کریمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - Effect of mechanical sever plastic deformation on corrosion current density and electrochemical impedance of AZ91 magnesium Alloy
  Seyed Rahim Kiahosseini Armin Aminian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Effect of Laser Parameters on Geometry of Cladded Stellite 6 on 35CrMo Steel Substrate and its Characterization
  Bahman  Mansouri Mahdi Rafiei Iman Ebrahimzadeh Farid  Naeimi Masoud  Barekat
  10.71670/jmatpro.2024.1115395
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - The Application of Microwave to Improve the Quality and Reduce the Frying Time of Zucchini Slices
  Fakhreddin Salehi Mostafa Amiri Sara Ghazvineh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Investigating on effect of heat treatment on microstructure and metallurgical properties of three layers explosively bonded Cu/Al/Cu plates
  اکبر Soltani Dehnavi M.R Khanzadeh Gharah shiran عباس Saadat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding
  امیر Aliabadi محمود Heydarzadeh Sohi محمد Ghambari کاوه Sheikhi Moghadam
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA)
  S.A Sajjadi مهدی Kianezhad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Effect of heat input on microstructure, mechanical properties and corrosion behavior of 5083-H321 aluminum alloy welded joint using P-MIG process
  میثم Ahmadi علی Farzadi A. R Yazdipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - Application of the response surface method in optimizing the thickness and hardness of vanadium carbide coatings created by the electrolytic plasma method
  Mehran Tadayonsaidi Babak Ghorbanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Fabrication of Crystalline Ni-B-Al2O3 Composite Coating by Electroless Method and its Tribological Characterizations
  H. KH A. I.N.P S.A حسن زاده تبریزی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - The Effect of Adding Nanodiamond Particles and Heat Treatment on Hardness and Wear Resistance of Ni-P-Nanodiamond Electroless Nanocomposite Coatings
  M. Niknezhad M. Mirjani S. Borji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties
  M. Tajbakhsh محمود فرهادی نیا farhadinia A. poustdouz O. yaghobi zadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing
  مهدی Azizieh مهدی Boroujerdnia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering
  M. Javanbakht M. j. Hadianfard E. Salahinejad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering
  H. Pakdell Noghabi A. Babakhani S. A. Sajjadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel
  B. Mokarian Khozani K. Amini H. Ghayour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding
  H. Mazaheri A.R. Alaei M. fazel
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - Fabrication and characterization of Zirconia-Alumina composites reinforced by graphite
  mehdi pourmaleki Zohre Balak
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - Effects of Friction Stir Processing on Mechanical Properties of AA7075 Aluminum Alloy after Joining by Gas Tungsten Arc Welding
  Hamed Fotouhi Sayed Ahmad Behgozin Ahmad Afsari
  10.71762/ahk2-x486
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - Effect of incorporation Ocimum basilicum L. powder on some physicochemical properties and oxidative stability of chocolate during the storage period
  Elham  Aleebrahim Maryam  Jafari
  10.71953/medherb.2023.1198616
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - Phase Transformations of Low-Alloy Steel DIN 1.5025 under Isothermal Holding in the Bainitic Region and the Formation of Microcomposite Microstructures
  Shima  Pashangeh Seyed Sadegh Ghasemi Banadkouki Mohammad Hadi Mohammad Hadi
  10.71905/jnm.2025.1200891