Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering
Subject Areas : journal of New Materials
H. Pakdell Noghabi
1
(دانشآموخته کارشناسی ارشد، مهندسی مواد و متالورژی، دانشکده مهندسی، دانشگاه فردوسی مشهد)
A. Babakhani
2
(دانشیار ، مهندسی مواد و متالورژی، دانشکده مهندسی، دانشگاه فردوسی مشهد)
S. A. Sajjadi
3
(استاد ، مهندسی مواد و متالورژی، دانشکده مهندسی، دانشگاه فردوسی مشهد)
Keywords: Aluminum-matrix composite, Graphite, liquid phase homogenization, Cold press-sintering, Wear properties, hardness,
Abstract :
To produce aluminum-matrix composite reinforced with graphite particles, mixing of pure aluminum and graphite powders by a new method, called homogenization in liquid phase, was used. The graphite content was chosen from zero to 4.5wt.% in this study. Composite samples were produced using the mixed powder by way cold-press sintering under different pressure, temperature and time. The specimen microstructures were investigated by optical microscopy and scanning electron microscopy (SEM). To evaluate the mechanical properties of samples, hardness and wear tests were performed. According to the results, homogenization in liquid phase method caused significant improvement in distribution of graphite particles in the matrix and the addition of 2.5wt.% graphite in the matrix. Improved mechanical properties to great extent.
1- J. F. Lin, M. G. Shih, Y. W. Chen, "The tribological performance of 6061 aluminium materials in oil lubricants with EP additives", Wear, Vol. 198, pp. 58-70, 1996.
2- P. K. Rohatgi, Y. Liu, M. Yin, Ti. Barr, "A surface-analytical study of tribodeforned aluminum alloy319-%10Vol graphite particle composite", Mater. Sci. and Eng., Vol. A123, pp. 213-218, 1990.
3-S. Basavara Jappa, G. Chandramohan, J. Paul Davim, "Application of Taguchi techniques to study dry sliding wear behavior of metal matrix composites" Materials and Design, Vol. 28, pp. 1393-1398, 2006.
4-S. Das, S. V. Parasad, T. R. Ramachandran, "Tribology of Al-Si alloy - graphite composites: triboinduced graphite films and the role of silicon morphology", Mater. Sci. and Eng. A, Vol. 138, pp. 123-132, 1991.
5-P. K. Rohatgi, Y. Liu, Ti. Barr, "Tribological behavior and surface analysis of tribodeformed Al alloy-50 pct graphite particle composites",
Metallurgical and Mater. Trans., Vol 22A, pp. 1435-1441, 1991.
6-J. B. Yang, C. B. Lin, , T.C. Wang, H. Y. Chu, "The tribological characteristics of A356.2 Al alloy/Gr(p) composites", Wear, Vol. 257, pp. 941-952, 2004.
7-I.A. Ibrahim, F. A. Mohamed, E. J. Lavernia, "Particulate reinforced metal matrix composites-a review", Journal of Materials Science, Vol. 26, pp. 1137-1156, 1991.
8-H. Liu, , P. K. Rohatgi, "Tribological characteristics of aluminum-50 vol pct graphite composite", Metallurgical Trans. A22, pp. 151-159, 1993.
9- U. T. S. Pillai, B. C. Pal, K. G. Satyanarayana, A. D. Damodaran, "Fracture behaviour of pressure die-cast aluminium-graphite composites", J. of mater. Sci., Vol. 30, pp. 1455-1461, 1995.
10-K. Parasad, S. Das, "The significance of the matrix microstructure on the solid lubrication characteristics of graphite in aluminium alloys", Mater. Sci. Eng., Vol. 144A, pp. 229-235, 1991.
11-J. N. Wei, H. F. Cheng, Y. F. Zhang, F. S. Han, Z. C. Zhou, J. P. Shui, "Effects of macroscopic graphite particulates on the damping behavior of commercially pure aluminum", Mater. Sci.and Eng., Vol. 325A, pp. 444-453, 2002.
12-A. K. Jha, S. V. Prasad, G. S. Upadhayaya, "Preparation and properties of 6061 aluminium alloy/graphite composites by PM route", Powder Metallurgy, Vol. 32, pp. 309-313, 1989.
13-S. Biswas, U. Srinivasa, S. Seshan, P. K. Rohatgi, "Cast aluminum-graphite composites for industrial applications", AFS Transactions, Vol. 88, pp. 159-166, 1980.
14-J. M. Torralba, A. E. Costa, F. Velasco, "PM aluminum matrix composites: an overview", J. of Mater. Processing Tech., Vol. 133, pp. 203-206, 2003.
15-F.H. Latief, El-Sayed M. Sherif, "Effects of sintering temperature and graphite addition on the mechanical properties of aluminum", Journal of Industrial and Engineering Chemistry, pp. 2129–2134, 2012.
16-M.I. Flores-Zamora, I. Estrada-Guel, J. Gonzalez-Hernandez, M. Miki-Yoshida, R. Martınez-Sanchez, "Aluminum–graphite composite produced by mechanical milling and hot extrusion", Journal of Alloys and Compounds, Vol. 434-435, pp. 518–521, 2007.
17-M. L. Ted Guo, C. Y. A. Tsao, "Tribological behavior of self-lubricating Aluminum/SiC/Graphite hybrid composites synthesized by the semi-solid powder densification method", Comp. Sci. and Tech., Vol. 60(1), pp. 65-74, 2000.
18-H. Chu, K. Liu, J. Yeh , "An insitu composite of A1 (graphite,Al4C3) produced by reciprocating extrusion", Mater. Sci. and Eng., Vol. A277, pp. 25-32, 2000.
19-I. Estrada-Guel, C. Carreno-Gallardo, D.C. Mendoza-Ruiz, M. Miki-Yoshida, E. Rocha-Rangel, R. Martinez-Sanchez, "Graphite nanoparticle dispersion in 7075 aluminum alloy by means of mechanical alloying", Journal of Alloys and Compounds, Vol. 483(1-2), pp. 173–177, 2009.
20-C. B. Lin, R. J. Chang, W. P. Wang, "A study on process and tribological behavior of Al alloy /Gr(p) composite", Wear, Vol. 217, pp. 167-174, 1998.
21- M. Gupta, S. C. Lim, W. B. Ng, "Processing, microstructure, and mechanical properties of (A1-Cu)/Cu composites synthesized using partial liquid phase casting process", Mater. Sci. and Tech., Vol. 13, pp. 584-589, 1997.
22- ر. تفریشی، ا. باباخانی، "بررسی خواص مکانیکی کامپوزیت آلومینیم گرافیت تولید شده به روش متالورژی پودر"، سومین همایش مشترک مهندسان متالورژی ایران، 1388.
23-Sh. Daneshvar, F. Khoramshahi, D. Khademi, H. Yavari Mehrabani, A. Babakhani, "Fabrication of Aluminum–Graphite Composites by SPS Method", The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3)", Tehran, Iran, 2012.
24- ع. یزدانی ،"تولید کامپوزیت های نانوساختار آلومینیوم -کاربید بور به روش اتصال تجمعی نورد "،نشریه مواد نوین ، دوره اول، شماره 3، ص. 23 -32، ﺑﻬﺎر 1390.
_||_