Abbasi Larki.Omid
Effect Of Quenching and Tempering Temperature on the Fracture Quality of GS-45CrNiMo4-2 Steel, Through the Quench-Temper Heat Treatment Cycle
[
Vol.9,
Issue
2
- WinterYear
1397]
Abbasi.Marzieh
Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite
[
Vol.8,
Issue
4
- SummerYear
1397]
Abbasi.Mehrdad
The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting
[
Vol.7,
Issue
3
- SpringYear
1396]
Abbasi.Mehrdad
Production of composite coating of hard chrome – nano alumina by electroplating from the bath of hexa valence chrome and the study of the hardness and abrasive properties
[
Vol.8,
Issue
2
- WinterYear
1396]
Abbasi.Mehrdad
The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method
[
Vol.14,
Issue
2
- SummerYear
1402]
Abbasi.Mehrdad
Introduction to Backscattered Electron Diffraction (EBSD)
[
Vol.4,
Issue
1
- SpringYear
1392]
Abbasi.milad
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties
[
Vol.14,
Issue
3
- AutumnYear
1402]
Abbaszadeh.mostafa
Investigating the simultaneous role of clay nanoparticles and strain rate on the tensile behavior of polyethylene matrix nanocomposite
[
Vol.13,
Issue
4
- WinterYear
1401]
Abdi.Farhad
Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel
[
Vol.11,
Issue
2
- SummerYear
1399]
abdoli.farzaneh
The Comparative Study of ADI Machinability with 42CrMo4 Steel in Turning Process
[
Vol.4,
Issue
5
- SpringYear
1393]
Abdollahi.Mehdi
Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures
[
Vol.10,
Issue
3
- AutumnYear
1398]
Abdollah-pour.Hassan
Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP)
[
Vol.10,
Issue
3
- AutumnYear
1398]
Abdolmaleki.Bahram
Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method
[
Vol.13,
Issue
2
- SummerYear
1401]
abolhasani.maryam
The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC
[
Vol.8,
Issue
3
- SpringYear
1397]
Aboutalebi.Gholam Reza
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde
[
Vol.11,
Issue
4
- WinterYear
1399]
aboutalebi.mohammad reza
Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas
[
Vol.14,
Issue
1
- SpringYear
1402]
Aboutalebi.Mohammad Reza
Evaluation of microsegregation during dendritic solidification of a binary alloy using phase field method and analytical models
[
Vol.1,
Issue
1
- AutumnYear
1389]
Adeli.Mandana
The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide
[
Vol.11,
Issue
3
- AutumnYear
1399]
Adeli.Mandana
Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas
[
Vol.14,
Issue
1
- SpringYear
1402]
Adeli.Mandana
Effect of TiC and TiB2 Reinforcement Phase Addition on Mechanical and Tribological Properties of NiAl-TiC-TiB2 Composite Produced Through Combustion Synthesis Process
[
Vol.12,
Issue
2
- SummerYear
1400]
adibnazari.saeed
Investigation of the effect of orthotropic parameters in failure of orthotropic materials under the rolling contact
[
Vol.10,
Issue
3
- AutumnYear
1398]
Afkhami Karaei.Mohammad
Laboratory investigation of using a ternary polymer of itaconic acid-sodium polystyrene sulfonate-acrylamide as an inhibitor for calcium carbonate scaling in formation water
[
Vol.14,
Issue
1
- SpringYear
1402]
Afkhami.Soheil
Investigating the Effect of Intercritical Annealing Heat Treatment on the Quenching and Partitioning of Ferrite-Bainite-Martensite Microphases in High-Silicon Low-Alloy DIN 1.5025 Steel
[
Vol.14,
Issue
2
- SummerYear
1402]
Afsharnaderi.Aria
Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
[
Vol.8,
Issue
4
- SummerYear
1397]
Afzali.niloufar
ساخت و مشخصه یابی فوتوالکترود تیتانیوم دی اکسید مزو متخلخل قالب گیری شده ی اتصال یافته با بیسموت وانادات
[
Vol.12,
Issue
4
- WinterYear
1400]
Ahmadi.Alireza
Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes
[
Vol.8,
Issue
4
- SummerYear
1397]
Ahmadi.Hamidreza
Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method
[
Vol.13,
Issue
2
- SummerYear
1401]
Ahmadi.Reza
Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties
[
Vol.8,
Issue
4
- SummerYear
1397]
Ahmadimoghadam.Hajar
Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures
[
Vol.10,
Issue
3
- AutumnYear
1398]
Ahmadimoghadam.Hajar
Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics
[
Vol.10,
Issue
2
- SummerYear
1398]
Ajdari.Sasan
Modification of the surface morphology of atmospheric plasma
sprayed tungsten coating for X-ray tube application
[
Vol.8,
Issue
4
- SummerYear
1397]
Akbarzadeh.Niloufar
Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties
[
Vol.8,
Issue
2
- WinterYear
1396]
Al Fadhli.Hind Khalaf Shayea
Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying
[
Vol.14,
Issue
2
- SummerYear
1402]
Alavi Zaree.Seyed Reza
Tensile behavior of AZ91 alloy containing silver and under different casting conditions
[
Vol.13,
Issue
4
- WinterYear
1401]
Alavi Zaree.Seyed Reza
improvement of mechanical properties and hot cracking susceptibility of 304 stainless steel weld joints with the simultaneous electromagnetic vibration application
[
Vol.9,
Issue
1
- AutumnYear
1397]
Alavi.Khadije
Microstructure Evaluation of Al Nanocomposite Foam Reinforced with SiO2 Nanoparticles Produced using Ultrasonic Technique
[
Vol.4,
Issue
6
- SummerYear
1393]
albooghobysh.mohammadreza
Design and fabrication of electrochemical biosensor based on β-CD-Graphene nanocomposite for specific adsorption of curcumin, chlorpromazine and clomipramine
[
Vol.7,
Issue
4
- SummerYear
1396]
Ali Askari Zamanic.Mohammad
Synthesis of strontium titanate from celestite concentrate
[
Vol.10,
Issue
3
- AutumnYear
1398]
Ali Panahiyan.Rasoul
Investigating the effect of banding on the impact resistance behavior of microalloy steel used in pipelines
[
Vol.3,
Issue
4
- WinterYear
1391]
Alimirzaloo.Vali
Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method
[
Vol.6,
Issue
3
- SummerYear
1395]
Alizadeh.Morteza
Investigation of Structural and Corrosion properties of MoS2- WC Reinforced Al/18Cu Layered Composite in Marine Environment
[
Vol.14,
Issue
4
- WinterYear
1402]
Alizadeh.Morteza
Production of Aluminum metal matrix composite reinforced with Al-Cr-Fe quasicrystal nano-powder by using accumulative roll bonding process and investigation mechanical properties
[
Vol.12,
Issue
2
- SummerYear
1400]
Alizadeh.Morteza
The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying
[
Vol.6,
Issue
1
- AutumnYear
1394]
Alizadeh.Mostafa
Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study)
[
Vol.8,
Issue
3
- SpringYear
1397]
Alizadeh.Mostafa
Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes
[
Vol.8,
Issue
4
- SummerYear
1397]
Aljassar.Zahraa Salah Hadi
Evaluation of tribological behavior of PEO composite coating containing SiO2 particles on 7075 aluminum alloy
[
Vol.13,
Issue
3
- AutumnYear
1401]
Allameh.Zahra
Fabrication of Crystalline Ni-B-Al2O3 Composite Coating by Electroless Method and its Tribological Characterizations
[
Vol.4,
Issue
6
- SummerYear
1393]
amani.ali mohammad
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties
[
Vol.14,
Issue
3
- AutumnYear
1402]
Amini Najafabadi.Reza
Investigation of microstructure and mechanical properties of welding metal of A516-Gr70 steel in the presence of TiO2 by SAW method
[
Vol.12,
Issue
3
- AutumnYear
1400]
Amini.K.
The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel
[
Vol.7,
Issue
2
- WinterYear
1395]
amini.kamran
Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process
[
Vol.7,
Issue
4
- SummerYear
1396]
Amini.Kamran
Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling
[
Vol.6,
Issue
2
- WinterYear
1394]
amini.milad
The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process
[
Vol.8,
Issue
3
- SpringYear
1397]
Amini.Roghayeh
Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash
[
Vol.10,
Issue
3
- AutumnYear
1398]
Amini.Saeid
The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process
[
Vol.8,
Issue
4
- SummerYear
1397]
aminolroayaee.maryam
Large Eenhancement in Mechanical Properties of Al 2024 Alloy After Single Rolling Pass
[
Vol.4,
Issue
5
- SpringYear
1393]
Amir Abadizadeh.Seyed Reza
Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal
[
Vol.11,
Issue
1
- SpringYear
1399]
Amiri.Gholam Reza
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde
[
Vol.11,
Issue
4
- WinterYear
1399]
Amoozegar.Abolfazr
Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins
[
Vol.6,
Issue
2
- WinterYear
1394]
Anjabin.Nozar
Numerical modeling of dissolution process of spherical precipitates in alloys by differential quadrature method (DQM)
[
Vol.12,
Issue
1
- SpringYear
1400]
Anvari.Sayedeh Zahra
The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding
[
Vol.8,
Issue
2
- WinterYear
1396]
Arabahmadi.Raziyeh
Synthesis and characterization of copper based spinel coating on alumina substrate for spark plug aero-engine application
[
Vol.12,
Issue
3
- AutumnYear
1400]
arshadi.sarah
Thermodynamic Analysis of Pressureless Sintering of B4C-Si Nano Composite by Factsage Software
[
Vol.4,
Issue
5
- SpringYear
1393]
Asadi.Abbas
Investigation of microstructure and mechanical properties of welding metal of A516-Gr70 steel in the presence of TiO2 by SAW method
[
Vol.12,
Issue
3
- AutumnYear
1400]
Asadi.Javad
Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system
during the Transient Liquid Phase (TLP)
[
Vol.11,
Issue
1
- SpringYear
1399]
Ashja mahdavi.Shahrokh
The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024
[
Vol.6,
Issue
4
- SpringYear
1395]
Askaran.Mohammad Reza
Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
[
Vol.9,
Issue
1
- AutumnYear
1397]
askari.masood
Effect of Chlorine in Perovskite Layers Morphology and Efficiency of Perovskite Solar Cells in One step & Spin-Dip Deposition Methods
[
Vol.9,
Issue
2
- WinterYear
1397]
Askarzadeh.Neda
An Investigation on the Effect of Barium Titanate Nanoparticles on the Properties of Electrospun PVDF Fibers
[
Vol.13,
Issue
1
- SpringYear
1401]
asoudeh.eshagh
analysis of plastic instability during sandwich sheet rolling
[
Vol.1,
Issue
1
- AutumnYear
1389]
Avak.karim
Introduction: Titanium alloys containing the β phase have much better corrosion resistance. Some alloying elements, such as Mo, stabilize this phase. Among the Ti alloys that contain this element, the Ti-10Mo alloy is of particular importance. If this alloy is produced using selective laser melting (SLM), it will be an approach that is user-friendly due to the nature of the process. Methods: Samples were printed by SLM process. The constituent phases were determined by XRD. The microstructure was evaluated using optical and scanning electron microscopes. Corrosion behavior was evaluated by cyclic potentiodynamic polarization and electrochemical impedance spectroscopy. Findings: In the XRD pattern of pure Ti powder and printed sample, α and α/α' phases are seen, respectively. However, Ti-10Mo powder mixture consists of α and Mo phases, the β phase is more dominant in printed sample because of the Mo penetration in the Ti matrix. As well as, in the microstructure of Ti10Mo the beta phase is seen as Mo-rich streaks, whereas in pure Ti it is found relatively negligible as epitaxially grown primary columnar β grains with acicular α' martensite phase. Mo addition to pure Ti reduces its passive current density and stabilize oxide film. However, Ti-10Mo alloy, with its various phases and galvanic couples, experiences rupture of the passive oxide film at higher potentials, leading to pitting corrosion. The impedance module value of Ti-10Mo is higher than that of pure Ti. Both samples have a double passive oxide film, with Ti-10Mo alloy exhibiting higher resistance than pure Ti.
[
Vol.15,
Issue
1
- SpringYear
1403]
Avak.karim
Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting
[
Vol.14,
Issue
3
- AutumnYear
1402]
Azadeh.Maryam
Synthesis and Characterization of Activated Carbon from Rice husk
[
Vol.11,
Issue
2
- SummerYear
1399]
azami.erfan
Applying Titania and Hydroxyapatite coating on Ti-6Al-4V by PEO and hydrothermal processes and investigating its corrosion behavior in simulated body environment
[
Vol.1,
Issue
1
- AutumnYear
1389]
Azarafza.Reza
Investigation of Morphology and production efficiency of Produced Nano-Fibers with multi-nozzle electrospinning process
[
Vol.9,
Issue
1
- AutumnYear
1397]
Azarafza.Reza
Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91
[
Vol.8,
Issue
3
- SpringYear
1397]
Azarmi.mohammad hoseyn
Experimental and finite element analysis of hot backward extrusion process of vanadium microalloyed steel preform for determining optimum preheat temperature
[
Vol.10,
Issue
2
- SummerYear
1398]
Azimifar.Farhad
Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying
[
Vol.14,
Issue
2
- SummerYear
1402]
Azimifar.Farhad
Evaluation of tribological behavior of PEO composite coating containing SiO2 particles on 7075 aluminum alloy
[
Vol.13,
Issue
3
- AutumnYear
1401]
Azizeh.M.
Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing
[
Vol.6,
Issue
2
- WinterYear
1394]
Azizi.Mehdi
Investigation of Thermophysical Properties and Thermal Performance and Pressure Drop of of Nanofluid including Functionalized Graphene with Polyvinyl Alcohol
[
Vol.12,
Issue
4
- WinterYear
1400]
Babaei.Abbas
Preparation and comparison of natural and synthetic hydroxyapatite scaffolds made by cold isostatic pressing method
[
Vol.9,
Issue
1
- AutumnYear
1397]
Babaei.Abbas
Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers
[
Vol.11,
Issue
3
- AutumnYear
1399]
Babaei.Abbas
Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide
[
Vol.12,
Issue
2
- SummerYear
1400]
Babaei.Azin
Application of Graphene Oxide Quantum Dots in Planar Perovskite Solar Cell
[
Vol.12,
Issue
2
- SummerYear
1400]
Babakhani.Abolfazl
Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering
[
Vol.7,
Issue
2
- WinterYear
1395]
Babakhani.Abolfazl
An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core
[
Vol.7,
Issue
3
- SpringYear
1396]
Babakhani.Abolfazl
Microstructure Evaluation of Al Nanocomposite Foam Reinforced with SiO2 Nanoparticles Produced using Ultrasonic Technique
[
Vol.4,
Issue
6
- SummerYear
1393]
Babakhani.Abolfazl
Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling
[
Vol.3,
Issue
4
- WinterYear
1391]
Babakhani.Abolfazl
Investigation of Mechanical Properties of Al-Al2O3 Composites Synthesized By Spark Plasma Sintering
[
Vol.7,
Issue
2
- WinterYear
1395]
Babakhani.Abolfazl
Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core
[
Vol.6,
Issue
2
- WinterYear
1394]
badarloo.mahdi
Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS)
[
Vol.7,
Issue
1
- AutumnYear
1395]
Badloo.Mojtaba
Investigating the effect of banding on the impact resistance behavior of microalloy steel used in pipelines
[
Vol.3,
Issue
4
- WinterYear
1391]
bagheri.nad ali
Study of Amitriptyline drug adsorption on multi walled carbon nanotube (MWCNT)
[
Vol.12,
Issue
1
- SpringYear
1400]
bagheri.nad ali
Efficient Removal of Omeprazole from Water Samples by Utilizing of Carbon Nanotubes as Powerful nanoadsorbent and Comprising with Graphite: Kinetic and Thermodynamic studies
[
Vol.12,
Issue
4
- WinterYear
1400]
Baghshahi.Saeed
Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies
[
Vol.10,
Issue
1
- SpringYear
1398]
Baghshahi.Saeid
Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method
[
Vol.7,
Issue
1
- AutumnYear
1395]
bahadori yekta.ehsan
Effect of PCA addition on microstructural and magnetic Properties a new Fe-based amorphous alloy prepared by Mechanical Alloying
[
Vol.9,
Issue
2
- WinterYear
1397]
bahadori yekta.ehsan
Effect of milling time and investigation of thermodynamic analysis on amorphous phase formation in Fe-C-Ta alloy prepared by mechanical alloying
[
Vol.8,
Issue
3
- SpringYear
1397]
Baharshanjani.Samin
Fabrication of solid oxide fuel cell (SOFC) anodes by electrophoretic deposition of NiO-YSZ composite powder
[
Vol.1,
Issue
1
- AutumnYear
1389]
Bahrami.vahid
Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment
[
Vol.6,
Issue
1
- AutumnYear
1394]
Bahrami-fard.Bahar
A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings
[
Vol.11,
Issue
2
- SummerYear
1399]
Bahrevar.Mohammad Ali
Investigating the effects of 2.5 mol% Ce doping on electrostriction behavior of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics
[
Vol.10,
Issue
1
- SpringYear
1398]
Bahrololoom.Mohammad Ebrahim
The formation process of nanocrystalline permalloy by electroplating and optimization the surface conditions for alloy coatings
[
Vol.6,
Issue
4
- SpringYear
1395]
Bahrololoom.Mohammad Ebrahim
A detailed DOE study on temperature, concentration and their interactions on corrosion protection of carbon steel
[
Vol.12,
Issue
3
- AutumnYear
1400]
Bahrynian.sharareh
The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3
[
Vol.6,
Issue
3
- SummerYear
1395]
bakhtiari.hassan
Investigation on the effect of frequency and duty cycle on nano-crystalline TiO2 coatings produced by plasma electrolytic oxidation
[
Vol.9,
Issue
1
- AutumnYear
1397]
Baktash.Esmat
An Experimental and Simulational Investigation on Schiff-base Complex of Cobalt and Corresponding Ligand as Corrosion Inhibitor in Acidic Solution
[
Vol.5,
Issue
1
- AutumnYear
1393]
Balichalandar.Nima
Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties
[
Vol.11,
Issue
4
- WinterYear
1399]
BALIN.Abit
Investigation onthe effect of both Content and Type of Carbon on Low Temperature Synthesis of SiC by Using Magnesiothermal Reduction Process
[
Vol.5,
Issue
1
- AutumnYear
1393]
baratali.maryam
Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure
[
Vol.7,
Issue
4
- SummerYear
1396]
Barati.Maryam
Implementation of integrity Management System for Gas Transmission Pipelines in South Zagros Region Based on ASME B31.8s
[
Vol.13,
Issue
3
- AutumnYear
1401]
bavarsiha.fatemeh
Fabrication of Fe3O4/SiO2/ZnO photocatalytic composite with core/shell/shell Nanostructure and characterized its
[
Vol.8,
Issue
4
- SummerYear
1397]
bavarsiha.fatemeh
Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties
[
Vol.8,
Issue
3
- SpringYear
1397]
Bayat.Mohammad
Experimental and finite element analysis of hot backward extrusion process of vanadium microalloyed steel preform for determining optimum preheat temperature
[
Vol.10,
Issue
2
- SummerYear
1398]
Bazargan Lari.Reza
Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes
[
Vol.10,
Issue
1
- SpringYear
1398]
Bazargan Lari.Reza
Studying the Adsorption Behavior of Copper (II) Ions from Industrial Waste Water Solutions Using Corncob Particles
[
Vol.4,
Issue
3
- AutumnYear
1392]
Behrad Vakylabad.Ali
Study on the capacity of medicinal intake and release of the polymeric polyurethane and biological parts of pomegranate fruit nanocomposite
[
Vol.13,
Issue
1
- SpringYear
1401]
Behroozi.Danial
Investigation of the Synergistic Effect of Soft and Hard Particles on Corrosion and Wear Resistance Behavior of Ni-B-PTFE-Si3N4 Electroless Coating on Carbon Steel
[
Vol.12,
Issue
1
- SpringYear
1400]
Behtari poor.Esmat
Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy
[
Vol.8,
Issue
2
- WinterYear
1396]
Behzadineghad.Arash
Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles
[
Vol.12,
Issue
3
- AutumnYear
1400]
belbasi.majid
Experimental and finite element analysis of hot backward extrusion process of vanadium microalloyed steel preform for determining optimum preheat temperature
[
Vol.10,
Issue
2
- SummerYear
1398]
belbasi.majid
Effect of cold rolling process on recovery strain and recovery ratio of
Ni50Ti40Hf10 shape memory alloy
[
Vol.10,
Issue
1
- SpringYear
1398]
belbasi.majid
Investigation of corrosion resistance of Ti-6Al-4V alloy welding zone
Welded by TIG method
[
Vol.12,
Issue
2
- SummerYear
1400]
bolouk heidari.reza
THE EFFECT OF MICROSTRUCTURAL CHANGES ON THE CORROSION PROPERTIES OF 310S AUSTENITIC STAINLESS STEEL AFTER THERMOMECHANICAL TREATMENT
[
Vol.13,
Issue
1
- SpringYear
1401]
Bonyadi.Mohammad
Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process
[
Vol.14,
Issue
2
- SummerYear
1402]
borji.saeed
The Effect of Adding Nanodiamond Particles and Heat Treatment on Hardness and Wear Resistance of Ni-P-Nanodiamond Electroless Nanocomposite Coatings
[
Vol.7,
Issue
2
- WinterYear
1395]
Chehreghani.Reza
Graphene nanosheets film by plasma electrolysis deposition
[
Vol.7,
Issue
2
- WinterYear
1395]
D
dadashian.saeideh
Fabrication of Fe3O4/SiO2/ZnO photocatalytic composite with core/shell/shell Nanostructure and characterized its
[
Vol.8,
Issue
4
- SummerYear
1397]
dadashian.saeideh
Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties
[
Vol.8,
Issue
3
- SpringYear
1397]
dadashian.saeideh
Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties
[
Vol.8,
Issue
3
- SpringYear
1397]
Dadashpoor.HAmed
Experimental study of forming Parts with central blister by Incremental forming process with positive-negative forming pattern
[
Vol.10,
Issue
4
- WinterYear
1398]
Dadfar.Soheil
Removal Color From Aqueous Solution By Penta Aza Tetra Ethylene Supported On Polyacrylamide As a New Adsorbent Kinetic And Adsorption Isotherm Studies
[
Vol.8,
Issue
1
- AutumnYear
1396]
Dadfar.Soheil
Batch adsorption and removal of Methylene Blue (MB) from wastewater using Tassel as a cheap bioadsorbent
[
Vol.4,
Issue
6
- SummerYear
1393]
Dadfar.Soheil
Batch adsorption and removal of Methylene Blue (MB) from wastewater using Tassel as a cheap bioadsorbent
[
Vol.4,
Issue
6
- SummerYear
1393]
Dadfar.Soheil
The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying
[
Vol.6,
Issue
1
- AutumnYear
1394]
Dadfar.Soheil
Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent
[
Vol.10,
Issue
4
- WinterYear
1398]
Dallali Isfahani.Taghi
Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron
[
Vol.6,
Issue
3
- SummerYear
1395]
Dallali Isfahani.Taghi
Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method
[
Vol.10,
Issue
1
- SpringYear
1398]
danesh.hossein
Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods
[
Vol.6,
Issue
2
- WinterYear
1394]
Daneshmand.Saeed
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde
[
Vol.11,
Issue
4
- WinterYear
1399]
Daneshmanesh.Habib
preparation and evaluation of mechanical and thermal properties of epoxy/silica nanocomposites
[
Vol.8,
Issue
3
- SpringYear
1397]
Daneshmanesh.Habib
The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel
[
Vol.8,
Issue
1
- AutumnYear
1396]
Dashti.Zahra
Investigation of creep behavior of ME21 and MX21 magnesium alloys
[
Vol.9,
Issue
2
- WinterYear
1397]
DavidCon.DavidCon
Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods
[
Vol.6,
Issue
2
- WinterYear
1394]
DavidUnink.DavidUnink
Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method
[
Vol.7,
Issue
1
- AutumnYear
1395]
DEHBOZORGI.mohamamad
Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes
[
Vol.10,
Issue
1
- SpringYear
1398]
Dehghanian.Changiz
Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application
[
Vol.10,
Issue
1
- SpringYear
1398]
Dehghanian.Changiz
Effect of sodium carbonate additive on corrosion behavior of nitrocarburized coating by cathodic plasma electrolytic
[
Vol.9,
Issue
1
- AutumnYear
1397]
Dehmolaei.Reza
Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process
[
Vol.5,
Issue
1
- AutumnYear
1393]
Dehmolaei.Reza
improvement of mechanical properties and hot cracking susceptibility of 304 stainless steel weld joints with the simultaneous electromagnetic vibration application
[
Vol.9,
Issue
1
- AutumnYear
1397]
dehnavi.mehdi
Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method
[
Vol.6,
Issue
4
- SpringYear
1395]
Dianati.Mohammad
Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites
[
Vol.6,
Issue
1
- AutumnYear
1394]
dolatkhah.farzad
Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium
[
Vol.7,
Issue
3
- SpringYear
1396]
Doniavi.Ali
Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die
[
Vol.11,
Issue
4
- WinterYear
1399]
dssfg.gg
The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying
[
Vol.6,
Issue
1
- AutumnYear
1394]
E
Ebadzadeh.Tooraj
Investigating the effects of 2.5 mol% Ce doping on electrostriction behavior of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics
[
Vol.10,
Issue
1
- SpringYear
1398]
Ebrahimi asl.Sarieh
Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline
[
Vol.8,
Issue
1
- AutumnYear
1396]
ebrahimi.Golamreza
Experimental Study on Creep Behavior of Al2024/SiC Composite Produced via Accumulative Roll Bonding (ARB) Process
[
Vol.8,
Issue
3
- SpringYear
1397]
ebrahimi.H.
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde
[
Vol.11,
Issue
4
- WinterYear
1399]
Ebrahimi.Reza
Investigation onthe effect of both Content and Type of Carbon on Low Temperature Synthesis of SiC by Using Magnesiothermal Reduction Process
[
Vol.5,
Issue
1
- AutumnYear
1393]
Ebrahimnezhad.Mehrdad
The Effect of Silver Nanoparticles on AC Magnetic Susceptibility of High Temperature Y123 Superconductor
[
Vol.12,
Issue
3
- AutumnYear
1400]
Ehrambaf.Leila
Synthesis of strontium titanate from celestite concentrate
[
Vol.10,
Issue
3
- AutumnYear
1398]
Ehsani.Naser
Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material
[
Vol.7,
Issue
4
- SummerYear
1396]
eipjkoe.eipjkoe
The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3
[
Vol.6,
Issue
3
- SummerYear
1395]
Emami.Hosein
Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde
[
Vol.11,
Issue
4
- WinterYear
1399]
Emami.Masood
Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
[
Vol.9,
Issue
1
- AutumnYear
1397]
Emami.Masood
Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
[
Vol.8,
Issue
4
- SummerYear
1397]
Enayati.Mohammad-Hossein
Effect of mechanical alloying and heat treatment process on the phase transformation of Ni-Cr-Al powders mixture
[
Vol.1,
Issue
1
- AutumnYear
1389]
entezari.monir sadat
Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering
[
Vol.7,
Issue
2
- WinterYear
1395]
Eqra.Rahim
Investigating the Effect of Co-Precipitation Synthesis Time of LiNi0.8Co0.15Al0.05O2 Cathode and Its Structural and Electrochemical Evaluation in Lithium-ion Battery
[
Vol.13,
Issue
1
- SpringYear
1401]
Esfandiyari.Hooman
Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading
[
Vol.8,
Issue
2
- WinterYear
1396]
Eskandari.Hamed
Effect Of Quenching and Tempering Temperature on the Fracture Quality of GS-45CrNiMo4-2 Steel, Through the Quench-Temper Heat Treatment Cycle
[
Vol.9,
Issue
2
- WinterYear
1397]
Eskandari.Mostafa
Tensile behavior of AZ91 alloy containing silver and under different casting conditions
[
Vol.13,
Issue
4
- WinterYear
1401]
Eskandari.Mostafa
Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions
[
Vol.11,
Issue
3
- AutumnYear
1399]
Eskandari.Mostafa
THE EFFECT OF MICROSTRUCTURAL CHANGES ON THE CORROSION PROPERTIES OF 310S AUSTENITIC STAINLESS STEEL AFTER THERMOMECHANICAL TREATMENT
[
Vol.13,
Issue
1
- SpringYear
1401]
Eslami.samira
Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting
[
Vol.14,
Issue
3
- AutumnYear
1402]
Esmaeili.Narges
Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant
[
Vol.13,
Issue
4
- WinterYear
1401]
Esmaeilpour.mohsen
Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant
[
Vol.13,
Issue
4
- WinterYear
1401]
Esmaeilpour.mohsen
Microbial Corrosion in Cooling Water of Lushan Shahid Beheshti Power Plant
[
Vol.13,
Issue
3
- AutumnYear
1401]
Etemad.Arash
Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process
[
Vol.9,
Issue
1
- AutumnYear
1397]
Etminanfar.Mohammadreza
Introduction: Titanium alloys containing the β phase have much better corrosion resistance. Some alloying elements, such as Mo, stabilize this phase. Among the Ti alloys that contain this element, the Ti-10Mo alloy is of particular importance. If this alloy is produced using selective laser melting (SLM), it will be an approach that is user-friendly due to the nature of the process. Methods: Samples were printed by SLM process. The constituent phases were determined by XRD. The microstructure was evaluated using optical and scanning electron microscopes. Corrosion behavior was evaluated by cyclic potentiodynamic polarization and electrochemical impedance spectroscopy. Findings: In the XRD pattern of pure Ti powder and printed sample, α and α/α' phases are seen, respectively. However, Ti-10Mo powder mixture consists of α and Mo phases, the β phase is more dominant in printed sample because of the Mo penetration in the Ti matrix. As well as, in the microstructure of Ti10Mo the beta phase is seen as Mo-rich streaks, whereas in pure Ti it is found relatively negligible as epitaxially grown primary columnar β grains with acicular α' martensite phase. Mo addition to pure Ti reduces its passive current density and stabilize oxide film. However, Ti-10Mo alloy, with its various phases and galvanic couples, experiences rupture of the passive oxide film at higher potentials, leading to pitting corrosion. The impedance module value of Ti-10Mo is higher than that of pure Ti. Both samples have a double passive oxide film, with Ti-10Mo alloy exhibiting higher resistance than pure Ti.
[
Vol.15,
Issue
1
- SpringYear
1403]
Etminanfar.Mohammadreza
Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering
[
Vol.13,
Issue
2
- SummerYear
1401]
Ezadi.Hadi
A Review of the Most Important Methods for Severe Plastic Deformation of Titanium
[
Vol.14,
Issue
2
- SummerYear
1402]
Ezat Pour.Hamid
Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy
[
Vol.8,
Issue
4
- SummerYear
1397]
F
falahati aghda.safa
Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V
[
Vol.8,
Issue
3
- SpringYear
1397]
Fallah-arani.Hesam
Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies
[
Vol.10,
Issue
1
- SpringYear
1398]
Farahbakhsh.Iman
Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite
[
Vol.8,
Issue
4
- SummerYear
1397]
Farahbakhsh.Iman
Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls
[
Vol.7,
Issue
3
- SpringYear
1396]
Farahbakhsh.Iman
Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite
[
Vol.8,
Issue
3
- SpringYear
1397]
faraji.reza
Fabrication and investigation of the properties of a water-based acrylic nanocomposite
[
Vol.8,
Issue
4
- SummerYear
1397]
farbod.mansoor
Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge
[
Vol.7,
Issue
4
- SummerYear
1396]
Farghadin.Mohammadhossein
The investigation of Structural and Magnetic Properties of Lanthanum and Barium Located into Multiferroic Ferrite Bismuth Nanoparticles in the Presence of Sugar Based Natural Surfactants Using Coprecipitation Approach
[
Vol.12,
Issue
3
- AutumnYear
1400]
farhangi.hassan
Microstructural characterization and mechanical properties of IN617 superalloy after long-term operation
[
Vol.12,
Issue
2
- SummerYear
1400]
farhangi.hassan
Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure
[
Vol.14,
Issue
1
- SpringYear
1402]
farhangi.hassan
Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy
[
Vol.13,
Issue
4
- WinterYear
1401]
farjam.mohammad
Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology
[
Vol.12,
Issue
1
- SpringYear
1400]
Farzadi.Ali
Effect of heat input on microstructure, mechanical properties and corrosion behavior of 5083-H321 aluminum alloy welded joint using P-MIG process
[
Vol.7,
Issue
4
- SummerYear
1396]
Fatehi Kivi.Amir
Inhibition of Copper Corrosion by Self-Assembled Thin Films of Schiff Bases in Acidic Media
[
Vol.5,
Issue
1
- AutumnYear
1393]
Fazeli Tehrani.Alimohammad
Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy
[
Vol.13,
Issue
4
- WinterYear
1401]
fazlalizadeh.reza
Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2
[
Vol.7,
Issue
4
- SummerYear
1396]
Fazli.Mehdi
Investigation of Mechanical Properties of Al-Al2O3 Composites Synthesized By Spark Plasma Sintering
[
Vol.7,
Issue
2
- WinterYear
1395]
forghani.farsad
Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions
[
Vol.11,
Issue
4
- WinterYear
1399]
Geranmayeh.A.R.
Investigation of creep behavior of ME21 and MX21 magnesium alloys
[
Vol.9,
Issue
2
- WinterYear
1397]
ghadamdezfuli.mohammadamin
improvement of mechanical properties and hot cracking susceptibility of 304 stainless steel weld joints with the simultaneous electromagnetic vibration application
[
Vol.9,
Issue
1
- AutumnYear
1397]
Ghaedmohammady.Mohammad javad
Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling
[
Vol.3,
Issue
4
- WinterYear
1391]
Ghafari.Gholamreza
Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing
[
Vol.13,
Issue
2
- SummerYear
1401]
Ghaffari yekta.Mohammad mehdi
analysis of plastic instability during sandwich sheet rolling
[
Vol.1,
Issue
1
- AutumnYear
1389]
Ghaffari Yekta.Mohammad Mehdi
analysis of plastic instability during sandwich sheet rolling
[
Vol.1,
Issue
1
- AutumnYear
1389]
Ghaffari.Gholamreza
Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast A216 alloy
[
Vol.12,
Issue
4
- WinterYear
1400]
Ghahraman Afshar.Majid
Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant
[
Vol.13,
Issue
4
- WinterYear
1401]
Ghahraman Afshar.Majid
Microbial Corrosion in Cooling Water of Lushan Shahid Beheshti Power Plant
[
Vol.13,
Issue
3
- AutumnYear
1401]
Ghahremani.AliReza
Fabrication of silver conductive lines by spray deposition method
[
Vol.14,
Issue
3
- AutumnYear
1402]
Ghalandari.Laleh
Mechanical and Corrosion Properties of Graphene Oxide-Copper Nano-composites produced by the accumulative Roll Bonding (ARB) method
[
Vol.11,
Issue
1
- SpringYear
1399]
Ghani Kolahloo.Niloofar
Aluminothermic reduction of zinc sulfide induced ball milling-Effect of ZnS:Al molar ratio on the raw mixture
[
Vol.9,
Issue
2
- WinterYear
1397]
Gharbani.Parvin
Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions
[
Vol.7,
Issue
4
- SummerYear
1396]
Ghasem Zadeh.Mohammad
Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal
[
Vol.11,
Issue
3
- AutumnYear
1399]
Ghasemalinezhad Shirazifard.Nazanin
Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition
[
Vol.8,
Issue
4
- SummerYear
1397]
Ghasemi Banadkouki.Seyed Sadegh
Investigating the Effect of Intercritical Annealing Heat Treatment on the Quenching and Partitioning of Ferrite-Bainite-Martensite Microphases in High-Silicon Low-Alloy DIN 1.5025 Steel
[
Vol.14,
Issue
2
- SummerYear
1402]
Ghasemi Banadkouki.Seyed Sadegh
Comparison of Microstructure and Mechanical Properties of Mo40 Steel in Ferrite-Martensite dual phase and quenched tempered condition
[
Vol.9,
Issue
1
- AutumnYear
1397]
Ghasemi Banadkouki.Seyed Sadegh
Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions
[
Vol.10,
Issue
3
- AutumnYear
1398]
Ghasemi Banadkouki.Seyed Sadegh
Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition
[
Vol.11,
Issue
3
- AutumnYear
1399]
Ghasemi Banadkouki.Seyed Sadegh
Superior improvement of tensile properties in a low alloy medium silicon DIN 1.5025 steel under single step quenching and partitioning heat treatment compared to fully martensitic conditions
[
Vol.11,
Issue
2
- SummerYear
1399]
ghasemi piranlu.fardin
Fabrication of Fe3O4/SiO2/ZnO photocatalytic composite with core/shell/shell Nanostructure and characterized its
[
Vol.8,
Issue
4
- SummerYear
1397]
Ghasemi.leila
Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas
[
Vol.14,
Issue
1
- SpringYear
1402]
Ghaseminejad.Hossein
Microbial Corrosion in Cooling Water of Lushan Shahid Beheshti Power Plant
[
Vol.13,
Issue
3
- AutumnYear
1401]
Ghaseminejad.Hossein
Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant
[
Vol.13,
Issue
4
- WinterYear
1401]
Ghasvari.Mohsen
Effect of Ablation Casting on Microstructure of a Magnesium Alloy
[
Vol.8,
Issue
4
- SummerYear
1397]
Ghatee.Mojtaba
Synthesis and characterization of copper based spinel coating on alumina substrate for spark plug aero-engine application
[
Vol.12,
Issue
3
- AutumnYear
1400]
Ghayour.Hamid
Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron
[
Vol.6,
Issue
3
- SummerYear
1395]
Ghayour.Hamid
Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process
[
Vol.7,
Issue
4
- SummerYear
1396]
Ghayour.Hamid
The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel
[
Vol.7,
Issue
2
- WinterYear
1395]
ghayour.mahbube
The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth
[
Vol.7,
Issue
2
- WinterYear
1395]
Gheisari.Khalil Allah
The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique
[
Vol.11,
Issue
4
- WinterYear
1399]
Gheisari.Khalil Allah
Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge
[
Vol.7,
Issue
4
- SummerYear
1396]
Gheisari.Khalil Allah
Dielectric Properties of Multiferroic Composite Consisting Lithium Ferrite and Bismuth Titanate Synthesized by Combustion Method
[
Vol.8,
Issue
2
- WinterYear
1396]
Gheisari.Khalil Allah
The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films
[
Vol.11,
Issue
3
- AutumnYear
1399]
Gheisari.Khalil Allah
Evaluation of corrosion inhibition effect of hybrid organic Ziziphus spina-christi leaf extract and zinc sulfate corrosion inhibitor on mild steel in saline solutions
[
Vol.13,
Issue
1
- SpringYear
1401]
Gheisari.Khalilollah
Evaluation of corrosion inhibition effect of hybrid organic Ziziphus spina-christi leaf extract and zinc sulfate corrosion inhibitor on mild steel in saline solutions
[
Vol.13,
Issue
1
- SpringYear
1401]
Ghobeiti Hasab.Mehdi
Investigation of the effect of current intensity and frequency in PC-GTAW on microstructural evolutions of weld joints of Hastelloy B-2 superalloy
[
Vol.10,
Issue
3
- AutumnYear
1398]
Gholami.Mehrdad
The gravimetric,, impedance, and morphology study of pyrrole-formylpyrrole copolymer synthesized by electro-polymerization
[
Vol.12,
Issue
4
- WinterYear
1400]
Ghorbaian.Babak
Application of the response surface method in optimizing the thickness and hardness of vanadium carbide coatings created by the electrolytic plasma method
[
Vol.9,
Issue
2
- WinterYear
1397]
Ghorbani.Hassan
Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure
[
Vol.14,
Issue
1
- SpringYear
1402]
Ghorbani.Mazaher
Inhibition of Copper Corrosion by Self-Assembled Thin Films of Schiff Bases in Acidic Media
[
Vol.5,
Issue
1
- AutumnYear
1393]
Ghorbani.Reza
Corrosion assessment of Amine regenerator column of SPGC using process simulation in gas sweetening unit to mitigate corrosion rate by controlling process parameters
[
Vol.10,
Issue
3
- AutumnYear
1398]
Ghorbanian.Babak
Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method
[
Vol.10,
Issue
2
- SummerYear
1398]
Golestanifard.Farhad
Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation
[
Vol.6,
Issue
2
- WinterYear
1394]
Golestanipour.Masoud
Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling
[
Vol.3,
Issue
4
- WinterYear
1391]
Golestanipour.Masoud
An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core
[
Vol.7,
Issue
3
- SpringYear
1396]
Golestanipour.Masoud
Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core
[
Vol.6,
Issue
2
- WinterYear
1394]
goodarzian.nooreddin
Stabilization of Doxorubicin Drug on Graphene Oxide Nanosystem and Computer simulation Study (In-Silico) on Topoisomerase II Enzyme
[
Vol.15,
Issue
1
- SpringYear
1403]
H
Habibnia.Mostafa
Experimental study of forming Parts with central blister by Incremental forming process with positive-negative forming pattern
[
Vol.10,
Issue
4
- WinterYear
1398]
hadad sabzevar.Mohsen
The effect of carbon nanotube surface modification on conductivity behavior of carbon nanotube reinforced polythene matrix hybrid HDPE composite with segregate structure
[
Vol.13,
Issue
3
- AutumnYear
1401]
haddad sabzevari.mohsen
In Situ fabrication of (Cu-Cr)-Al2O3 nanocomposite
[
Vol.1,
Issue
1
- AutumnYear
1389]
haddad sabzevari.mohsen
Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method
[
Vol.6,
Issue
4
- SpringYear
1395]
Hadian.Hooman
Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal
[
Vol.11,
Issue
3
- AutumnYear
1399]
Haghighi.Mohammad
Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins
[
Vol.6,
Issue
2
- WinterYear
1394]
Haghighi.ٰVida
Fabrication and Evaluation of Surface and Biodegradable Properties of Polycaprolactone/Keratin Nanofibers Scaffolds containing Carbon Nanotube for Use in Bone Tissue Engineering
[
Vol.11,
Issue
1
- SpringYear
1399]
Hajisafari.Mahmoud
Investigation Corrosion Fatigue Behaviours of 7075-T6 Aluminum Alloy in Sea Waterr
[
Vol.8,
Issue
1
- AutumnYear
1396]
Hajisafari.Mahmoud
Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V
[
Vol.8,
Issue
3
- SpringYear
1397]
Hajizadeh.mahdi
Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites
[
Vol.6,
Issue
1
- AutumnYear
1394]
Halali.Mohammad
Effect of Chlorine in Perovskite Layers Morphology and Efficiency of Perovskite Solar Cells in One step & Spin-Dip Deposition Methods
[
Vol.9,
Issue
2
- WinterYear
1397]
Hamedi.Elham
protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy
[
Vol.10,
Issue
2
- SummerYear
1398]
HASANI.Arman
Effect of the power type of the general flow function in texture simulation of ECAP
[
Vol.12,
Issue
2
- SummerYear
1400]
hasani.mehri
Thermodynamic Analysis of Pressureless Sintering of B4C-Si Nano Composite by Factsage Software
[
Vol.4,
Issue
5
- SpringYear
1393]
hasanvand.arefeh
Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling
[
Vol.3,
Issue
4
- WinterYear
1391]
hasanvand.maryam
Investigating the effect of banding on the impact resistance behavior of microalloy steel used in pipelines
[
Vol.3,
Issue
4
- WinterYear
1391]
hasanzadeh.neda
Stabilization of Doxorubicin Drug on Graphene Oxide Nanosystem and Computer simulation Study (In-Silico) on Topoisomerase II Enzyme
[
Vol.15,
Issue
1
- SpringYear
1403]
Hasanzadeh.Sadegh Ali
Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method
[
Vol.10,
Issue
1
- SpringYear
1398]
Hashemi.Babak
Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash
[
Vol.10,
Issue
3
- AutumnYear
1398]
Hashemi.Babak
Effect of Neodymium and Yttrium oxides on the Structural and Electrochemical Properties of LiFePO4/C Composite as Cathode of lithium ion Batteries Synthesized by Solid State Method
[
Vol.11,
Issue
4
- WinterYear
1399]
Hashemi.Babak
Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance
[
Vol.7,
Issue
4
- SummerYear
1396]
Hashemi.Babak
Investigation of Effect of Heat Treatment on Produced Phases in 45S5 Glass-Ceramics Synthesized in the Forms of Powder and Pellet, and Investigation of Their Bioactivity
[
Vol.9,
Issue
2
- WinterYear
1397]
Hashemi.Babak
Investigating the effect of replacing CaO with CaF2 on bioactivity and compressive strength of 45S5 glass ceramic synthesized from soda-lime glass waste by solid state method
[
Vol.14,
Issue
1
- SpringYear
1402]
Hashemi.Babak
Investigating the Effect of Co-Precipitation Synthesis Time of LiNi0.8Co0.15Al0.05O2 Cathode and Its Structural and Electrochemical Evaluation in Lithium-ion Battery
[
Vol.13,
Issue
1
- SpringYear
1401]
hashemian.Nahid
Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam
[
Vol.7,
Issue
4
- SummerYear
1396]
Hassanpour.Ahmad
Growth and investigation of magnetic and optical properties of Fe3O4@CuO core-shell nanostructures
[
Vol.9,
Issue
2
- WinterYear
1397]
Hassanzadeh.S.A.
Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation
[
Vol.10,
Issue
4
- WinterYear
1398]
Hassanzadeh.S.A.
Investigation on the effect of frequency and duty cycle on nano-crystalline TiO2 coatings produced by plasma electrolytic oxidation
[
Vol.9,
Issue
1
- AutumnYear
1397]
Hatami kakesh.Farzin
Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling
[
Vol.6,
Issue
2
- WinterYear
1394]
Hatamimanesh.Masoud
Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell)
[
Vol.10,
Issue
3
- AutumnYear
1398]
HAYATI.PAYAM
Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology
[
Vol.12,
Issue
1
- SpringYear
1400]
Hayati.Raziye
Investigating the effects of 2.5 mol% Ce doping on electrostriction behavior of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics
[
Vol.10,
Issue
1
- SpringYear
1398]
Hayati.Raziye
Synthesis of strontium titanate from celestite concentrate
[
Vol.10,
Issue
3
- AutumnYear
1398]
Hayati.Raziye
Synthesis of barium carbonate by mechanochemical method
[
Vol.13,
Issue
2
- SummerYear
1401]
Hayati.Raziye
Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers
[
Vol.11,
Issue
3
- AutumnYear
1399]
Hayati.Raziyeh
Synthesis and characterization of bio-nanocomposite of FeOOH-AC and its application in the removal of methyl orange anionic dye
[
Vol.14,
Issue
3
- AutumnYear
1402]
Hayati.Raziyeh
Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process
[
Vol.14,
Issue
2
- SummerYear
1402]
hedayati.samane
Production of Porous Carbon Nanoparticles by Usingzinc Layered Gallate Nanohybrid Precursors and Investigate Its Aapplications as Polymeric Fuel Cell Cathode Catalyst
[
Vol.6,
Issue
2
- WinterYear
1394]
Heidari.Gholamreza
Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure
[
Vol.7,
Issue
4
- SummerYear
1396]
Heidarzade Sohi.Mahmoud
Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings
[
Vol.6,
Issue
4
- SpringYear
1395]
Heidarzade Sohi.Mahmoud
Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding
[
Vol.7,
Issue
4
- SummerYear
1396]
Henryrit.Henryrit
Investigating the simultaneous role of clay nanoparticles and strain rate on the tensile behavior of polyethylene matrix nanocomposite
[
Vol.13,
Issue
4
- WinterYear
1401]
Henryrit.Henryrit
Investigation of the Effect of Strain Rate on Tensile Properties of Polyurethane Using Eyring Model
[
Vol.7,
Issue
1
- AutumnYear
1395]
Homayooni.Fatemeh
Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide
[
Vol.12,
Issue
2
- SummerYear
1400]
Honarpisheh.Mohammad
The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process
[
Vol.8,
Issue
4
- SummerYear
1397]
Hosseinabadi.Navid
The investigation of Structural and Magnetic Properties of Lanthanum and Barium Located into Multiferroic Ferrite Bismuth Nanoparticles in the Presence of Sugar Based Natural Surfactants Using Coprecipitation Approach
[
Vol.12,
Issue
3
- AutumnYear
1400]
Hosseini.Fatemehsadat
Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW)
[
Vol.6,
Issue
1
- AutumnYear
1394]
Hosseini.Ramin
Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties
[
Vol.8,
Issue
4
- SummerYear
1397]
Hosseini.Seyyed Mohammad Ali
Evaluation of Metoral pill as an effective and novel inhibitor for corrosion of mild steel in acidic media
[
Vol.9,
Issue
2
- WinterYear
1397]
Hosseini.Vahid
Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine
[
Vol.11,
Issue
4
- WinterYear
1399]
Hosseini.Zakieh
The effect of manganese impurity on the interlayer Al/PVP:CdS/P-Si Schottky structure and its dielectric properties
[
Vol.12,
Issue
1
- SpringYear
1400]
Hosseni.Zahra
Application of Graphene Oxide Quantum Dots in Planar Perovskite Solar Cell
[
Vol.12,
Issue
2
- SummerYear
1400]
Houshmand.Mohammad
Root causes analyzed of leakage on the tank bottom using simulation cathodic protection
[
Vol.10,
Issue
2
- SummerYear
1398]
I
ibrahimi.e
Introduction to Backscattered Electron Diffraction (EBSD)
[
Vol.4,
Issue
1
- SpringYear
1392]
Isafi.Salah
Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies
[
Vol.10,
Issue
1
- SpringYear
1398]
Islam.Maksudul
Diffusion Bonded Alumina Bodies Using Hydride Nanopowders Interlayers and Structural Investigation of Joint Interface
[
Vol.5,
Issue
1
- AutumnYear
1393]
Islam.Nazrul
Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam
[
Vol.7,
Issue
4
- SummerYear
1396]
J
Jafari.Hamidreza
Fabrication of Aluminum Foam by ARB and Investigation
on Its Friction Stir Welded Joint Properties
[
Vol.5,
Issue
1
- AutumnYear
1393]
Jafarizadeh.Tahereh
Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology
[
Vol.12,
Issue
1
- SpringYear
1400]
Jahanbakhshi nejad.amirali
Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process
[
Vol.14,
Issue
2
- SummerYear
1402]
Jalali.Ali
A Review of the Most Important Methods for Severe Plastic Deformation of Titanium
[
Vol.14,
Issue
2
- SummerYear
1402]
Jalilzadeh.Mahdieh
Applying Titania and Hydroxyapatite coating on Ti-6Al-4V by PEO and hydrothermal processes and investigating its corrosion behavior in simulated body environment
[
Vol.1,
Issue
1
- AutumnYear
1389]
jamali.kazem
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties
[
Vol.14,
Issue
3
- AutumnYear
1402]
Jamasb.Shahriar
Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox
[
Vol.10,
Issue
3
- AutumnYear
1398]
jangjou.Ali
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties
[
Vol.14,
Issue
3
- AutumnYear
1402]
Javadi.Mehrdad
Effect of severe plastic deformation process on mechanical properties of 1.7225 Steel
[
Vol.11,
Issue
3
- AutumnYear
1399]
Javadpour.Sirus
A detailed DOE study on temperature, concentration and their interactions on corrosion protection of carbon steel
[
Vol.12,
Issue
3
- AutumnYear
1400]
Javadpour.Sirus
Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell
[
Vol.7,
Issue
4
- SummerYear
1396]
Javadpour.Sirus
Large Eenhancement in Mechanical Properties of Al 2024 Alloy After Single Rolling Pass
[
Vol.4,
Issue
5
- SpringYear
1393]
Javadpour.Sirus
Flexural Properties of Epoxy Matrix Composites Reinforced by
Milled Fibers
[
Vol.6,
Issue
4
- SpringYear
1395]
Javadpour.Sirus
Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process
[
Vol.6,
Issue
1
- AutumnYear
1394]
Javanbakht.Mehran
Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure
[
Vol.7,
Issue
4
- SummerYear
1396]
Javid.Ali
Preysler polyoxometalate supported on functionalized graphene oxide nanoparticles: synthesis, identification and investigation of its catalytic activity
[
Vol.14,
Issue
4
- WinterYear
1402]
kabiri laghab.mehdi
Investigation of corrosion resistance of Ti-6Al-4V alloy welding zone
Welded by TIG method
[
Vol.12,
Issue
2
- SummerYear
1400]
kafashan.hosein
Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film
[
Vol.8,
Issue
4
- SummerYear
1397]
Kamaei.Pouria
Tensile behavior of AZ91 alloy containing silver and under different casting conditions
[
Vol.13,
Issue
4
- WinterYear
1401]
karamian.ebrahim
The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks
[
Vol.6,
Issue
2
- WinterYear
1394]
Karamouz.Mostafa
Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes
[
Vol.8,
Issue
4
- SummerYear
1397]
karanian.isa
Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes
[
Vol.8,
Issue
2
- WinterYear
1396]
Karbakhsh ravari.banafsheh
The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process
[
Vol.8,
Issue
3
- SpringYear
1397]
karimi Yunjali.soraya
Investigation of corrosion behavior nanocrystalline Nickel-Cobalt coating by electrodeposition
[
Vol.1,
Issue
1
- AutumnYear
1389]
Karimi Zarchi.Hamid Reza
Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions
[
Vol.10,
Issue
3
- AutumnYear
1398]
karimi.abbas
Investigation of Structural and Corrosion properties of MoS2- WC Reinforced Al/18Cu Layered Composite in Marine Environment
[
Vol.14,
Issue
4
- WinterYear
1402]
Karimi.Alireza
The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide
[
Vol.11,
Issue
3
- AutumnYear
1399]
Kasaei.Seyed Reza
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties
[
Vol.14,
Issue
3
- AutumnYear
1402]
Kashefi Torbati.Mehrdad
Root causes analyzed of leakage on the tank bottom using simulation cathodic protection
[
Vol.10,
Issue
2
- SummerYear
1398]
kashefi.mohsen
Comparison of Microstructure and Mechanical Properties of Mo40 Steel in Ferrite-Martensite dual phase and quenched tempered condition
[
Vol.9,
Issue
1
- AutumnYear
1397]
Kasiri.Masoud
Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel
[
Vol.8,
Issue
2
- WinterYear
1396]
KennethAdops.KennethAdops
Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering
[
Vol.7,
Issue
2
- WinterYear
1395]
Keramatpour.Mehdi
Spark plasma sintering of aluminum 3000 and 5000 alloys powder obtained from recycling of Used Beverage Cans (UBCs)
[
Vol.14,
Issue
4
- WinterYear
1402]
Keramatpour.Mehdi
Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time
[
Vol.14,
Issue
2
- SummerYear
1402]
Keramatpour.Mehdi
Modeling and investigation of the effect of supersolidus liquid phase sintering variables on physical properties and
Mechanics of Cu28Zn alloy
[
Vol.4,
Issue
1
- SpringYear
1392]
Keramatpour.Mehdi
Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb
[
Vol.6,
Issue
4
- SpringYear
1395]
Keramatpour.Mehdi
Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting
[
Vol.14,
Issue
3
- AutumnYear
1402]
Keramatpour.Mehdi
Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering
[
Vol.13,
Issue
2
- SummerYear
1401]
Keramatpour.Mehdi
The role of Ex-situ 0.5wt.% B4C reinforcement and later formed In–situ TiC and TiBw on microstructural evolution of Ti-10Mo mixed powder alloy
[
Vol.13,
Issue
4
- WinterYear
1401]
Keramatpour.Mehdi
Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method
[
Vol.14,
Issue
1
- SpringYear
1402]
keshavarz.mozhgan
The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel
[
Vol.8,
Issue
1
- AutumnYear
1396]
Keshavarz.Sajad
Synthesis and direct ink writing of silver ink for fabricating current collecting lines of dye sensitized solar cells
[
Vol.13,
Issue
3
- AutumnYear
1401]
Keshavarzi.Reza
ساخت و مشخصه یابی فوتوالکترود تیتانیوم دی اکسید مزو متخلخل قالب گیری شده ی اتصال یافته با بیسموت وانادات
[
Vol.12,
Issue
4
- WinterYear
1400]
khakpour.iman
Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings
[
Vol.6,
Issue
4
- SpringYear
1395]
Khalaj.Gholamreza
Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties
[
Vol.11,
Issue
4
- WinterYear
1399]
Khalaj.Gholamreza
Modelling of austenite decomposition transformation of heat affected zone in API-X65 and X70 pipeline steels
[
Vol.9,
Issue
1
- AutumnYear
1397]
Khalaj.Gholamreza
Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using the primary sources of Borujerd talc and Abbas Abad calcium carbonate as primary sources
[
Vol.13,
Issue
4
- WinterYear
1401]
Khalaj.Gholamreza
Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing
[
Vol.13,
Issue
2
- SummerYear
1401]
Khalaj.Gholamreza
Investigating the effect of different sources of magnesium oxide on the structure and final properties of wall tile bodies containing CaO using rapid firing method
[
Vol.14,
Issue
1
- SpringYear
1402]
Khalaj.Gholamreza
Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using Zanjan talc and Abbas Abad calcium carbonate as primary sources
[
Vol.13,
Issue
3
- AutumnYear
1401]
Khalaj.Gholamreza
Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate
[
Vol.14,
Issue
3
- AutumnYear
1402]
Khalaj.Gholamreza
Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast A216 alloy
[
Vol.12,
Issue
4
- WinterYear
1400]
Khalaj.Gholamreza
Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method
[
Vol.13,
Issue
2
- SummerYear
1401]
khalasi dezfuli.mehdi
Investigation of the effect of current intensity and frequency in PC-GTAW on microstructural evolutions of weld joints of Hastelloy B-2 superalloy
[
Vol.10,
Issue
3
- AutumnYear
1398]
Khalifesoltani.Seyed
Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material
[
Vol.7,
Issue
4
- SummerYear
1396]
khalil arjmandi.Fatemeh
Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings
[
Vol.6,
Issue
4
- SpringYear
1395]
khalilo.ali
Preparation of UPVC/ SAN/Ag-TiO2 nanocomposite by casting method and characterization of its physical and mechanical properties
[
Vol.7,
Issue
1
- AutumnYear
1395]
khatami.Elahe Sadat
Investigation of leaching of zinc from oxide waste using citric acid
[
Vol.9,
Issue
1
- AutumnYear
1397]
khazaei.yaghoub
Graphene nanosheets film by plasma electrolysis deposition
[
Vol.7,
Issue
2
- WinterYear
1395]
Khezri.Abolfazl
Investigation Corrosion Fatigue Behaviours of 7075-T6 Aluminum Alloy in Sea Waterr
[
Vol.8,
Issue
1
- AutumnYear
1396]
Khodabade.Alireza
Investigation of gamma precipitation process under effect of strain in Nimonic80A nickel base superalloy
[
Vol.12,
Issue
1
- SpringYear
1400]
Khodabakhshi.Amir Hossein
An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding
[
Vol.10,
Issue
4
- WinterYear
1398]
khodabandehloo.navid
Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process
[
Vol.8,
Issue
2
- WinterYear
1396]
khodai.mohammad
The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding
[
Vol.8,
Issue
2
- WinterYear
1396]
khorampour.ahmad
Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel
[
Vol.11,
Issue
2
- SummerYear
1399]
khordadpour.mohadeseh
Investigation of corrosion behavior nanocrystalline Nickel-Cobalt coating by electrodeposition
[
Vol.1,
Issue
1
- AutumnYear
1389]
khorram.sirous
Experimental investigation of the efficiency of deposited TiO2 on porous aluminum in pollutant removal: a comparison between PEO and anodizing methods
[
Vol.10,
Issue
4
- WinterYear
1398]
Kianezhad.Mehdi
Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA)
[
Vol.8,
Issue
3
- SpringYear
1397]
Kondori.Mahmoud
Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior
[
Vol.6,
Issue
1
- AutumnYear
1394]
Kooshan.aiyoub
Investigation of Filler Metal on the Mechanical and Metallurgical Properties of Welding- Brazing Hybrid Joining of Aluminium to Ggalvanized Steel
[
Vol.7,
Issue
1
- AutumnYear
1395]
Kordjazi.Majedeh
Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method
[
Vol.10,
Issue
2
- SummerYear
1398]
Lotfi.Behnam
synthesis and characterization of Al-Al3Ti in-situ composite produced by fsp using reactive mechanically alloyed powder
[
Vol.10,
Issue
4
- WinterYear
1398]
Lotfi.Behnam
Fabrication of Ti Bulk amorphous alloys by mechanical alloying and plasma sintering methods and evaluation of structure and corrosion behavior
[
Vol.15,
Issue
1
- SpringYear
1403]
lotfian.Najme
Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam
[
Vol.7,
Issue
4
- SummerYear
1396]
M
mahdian.hossein
Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance
[
Vol.7,
Issue
4
- SummerYear
1396]
Mahdikhani.Behrouz
Effect of severe plastic deformation process on mechanical properties of 1.7225 Steel
[
Vol.11,
Issue
3
- AutumnYear
1399]
Mahmoodan.Morteza
Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method
[
Vol.13,
Issue
2
- SummerYear
1401]
Mahmoodi.Mahboubeh
Fabrication and Evaluation of Surface and Biodegradable Properties of Polycaprolactone/Keratin Nanofibers Scaffolds containing Carbon Nanotube for Use in Bone Tissue Engineering
[
Vol.11,
Issue
1
- SpringYear
1399]
Mahmoodi.Mahboubeh
Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications
[
Vol.7,
Issue
3
- SpringYear
1396]
Makrtichian.Sevak
Assessment of plastic deformation of the A356 foam sandwich panel during compression and bending tests
[
Vol.10,
Issue
1
- SpringYear
1398]
Malekan.Mehdi
Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure
[
Vol.14,
Issue
1
- SpringYear
1402]
Malekan.Mehdi
Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
[
Vol.9,
Issue
1
- AutumnYear
1397]
Malekan.Mehdi
Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
[
Vol.8,
Issue
4
- SummerYear
1397]
Manafi.S.
The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables
[
Vol.8,
Issue
1
- AutumnYear
1396]
Manafi.S.
Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls
[
Vol.7,
Issue
3
- SpringYear
1396]
manteghian.elham
A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321
[
Vol.6,
Issue
1
- AutumnYear
1394]
Maraki.Mohammadreza
A Review of the Most Important Methods for Severe Plastic Deformation of Titanium
[
Vol.14,
Issue
2
- SummerYear
1402]
marmazi.Maryam
Effect of mechanical alloying and heat treatment process on the phase transformation of Ni-Cr-Al powders mixture
[
Vol.1,
Issue
1
- AutumnYear
1389]
Mashreghi.Ali
Investigating the effect of particle size on Volume-per-atom parameter of TiO2 nanoparticles
[
Vol.8,
Issue
1
- AutumnYear
1396]
Mashreghi.Ali
Fabrication of silver conductive lines by spray deposition method
[
Vol.14,
Issue
3
- AutumnYear
1402]
Mashreghi.Ali
Investigation of electrophoretic parameters of TiO2 nanoparticles for fabricating photoanode of dye sensitized solar cells
[
Vol.9,
Issue
1
- AutumnYear
1397]
Mashreghi.Ali
Synthesis and direct ink writing of silver ink for fabricating current collecting lines of dye sensitized solar cells
[
Vol.13,
Issue
3
- AutumnYear
1401]
Mashreghi.Ali
Optimizing synthesis parameters of silver nanowires by polyol method
[
Vol.12,
Issue
3
- AutumnYear
1400]
Masjedi.Mohamadreza
Investigation of Effect of Heat Treatment on Produced Phases in 45S5 Glass-Ceramics Synthesized in the Forms of Powder and Pellet, and Investigation of Their Bioactivity
[
Vol.9,
Issue
2
- WinterYear
1397]
Mazaheri.Mojtaba
Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox
[
Vol.10,
Issue
3
- AutumnYear
1398]
mehdizadeh.mohsen
Microstructural characterization and mechanical properties of IN617 superalloy after long-term operation
[
Vol.12,
Issue
2
- SummerYear
1400]
mehdizadeh.mohsen
Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions
[
Vol.11,
Issue
4
- WinterYear
1399]
Mehrabadi.Zohreh
Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology
[
Vol.12,
Issue
1
- SpringYear
1400]
MIRHAJ.MARJAN
Fabrication and Evaluation of Surface and Biodegradable Properties of Polycaprolactone/Keratin Nanofibers Scaffolds containing Carbon Nanotube for Use in Bone Tissue Engineering
[
Vol.11,
Issue
1
- SpringYear
1399]
Mirheidari.Seyed Jaafar
An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries
[
Vol.6,
Issue
2
- WinterYear
1394]
mirjani.masoud
The Effect of Adding Nanodiamond Particles and Heat Treatment on Hardness and Wear Resistance of Ni-P-Nanodiamond Electroless Nanocomposite Coatings
[
Vol.7,
Issue
2
- WinterYear
1395]
mirzaee.mahlagha
The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying
[
Vol.6,
Issue
1
- AutumnYear
1394]
Mirzaee.Majid
Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application
[
Vol.10,
Issue
1
- SpringYear
1398]
Mirzaee.Masoud
Investigation of gamma precipitation process under effect of strain in Nimonic80A nickel base superalloy
[
Vol.12,
Issue
1
- SpringYear
1400]
Moeinifar.Sadegh
Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process
[
Vol.5,
Issue
1
- AutumnYear
1393]
mofid.mohamad amar
Investigation of corrosion resistance of Ti-6Al-4V alloy welding zone
Welded by TIG method
[
Vol.12,
Issue
2
- SummerYear
1400]
moghaddam.kaveh
Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery
[
Vol.7,
Issue
3
- SpringYear
1396]
moghaddam.kaveh
Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy
[
Vol.8,
Issue
2
- WinterYear
1396]
moghaddam.kaveh
Production of Open Cell Copper Foam and assessment of foam Substructure
[
Vol.8,
Issue
3
- SpringYear
1397]
Mohaghgheghi.Hossein
Microstructural Grading of Al-11 wt.%Mg2Si Hypoeutectic Alloy by Centrifugal Casting
[
Vol.1,
Issue
1
- AutumnYear
1389]
Mohaghgheghi.Hossein
Applying Titania and Hydroxyapatite coating on Ti-6Al-4V by PEO and hydrothermal processes and investigating its corrosion behavior in simulated body environment
[
Vol.1,
Issue
1
- AutumnYear
1389]
mohamadrezaii.marzei
Dielectric Properties of Multiferroic Composite Consisting Lithium Ferrite and Bismuth Titanate Synthesized by Combustion Method
[
Vol.8,
Issue
2
- WinterYear
1396]
Mohammadi.Majid
Study of Amitriptyline drug adsorption on multi walled carbon nanotube (MWCNT)
[
Vol.12,
Issue
1
- SpringYear
1400]
mohammadkhani.Farzane
Experimental investigation of the efficiency of deposited TiO2 on porous aluminum in pollutant removal: a comparison between PEO and anodizing methods
[
Vol.10,
Issue
4
- WinterYear
1398]
mohammadnejad.masumeh
Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders
[
Vol.6,
Issue
3
- SummerYear
1395]
mohammadpour.mahsa
Flow behavior and microstructural investigation of GTD 111 cast nickel base superalloy during hot pressure test
[
Vol.8,
Issue
3
- SpringYear
1397]
mohannaee.setareh
Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium
[
Vol.7,
Issue
3
- SpringYear
1396]
Mohassel.Abbas
Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles
[
Vol.12,
Issue
3
- AutumnYear
1400]
Mohassel.Abbas
Aluminothermic reduction of zinc sulfide induced ball milling-Effect of ZnS:Al molar ratio on the raw mixture
[
Vol.9,
Issue
2
- WinterYear
1397]
Mohassel.Abbas
Synthesis of barium carbonate by mechanochemical method
[
Vol.13,
Issue
2
- SummerYear
1401]
Mohassel.Abbas
Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide
[
Vol.12,
Issue
2
- SummerYear
1400]
Moheb.Naeimeh
Graphene nanosheets film by plasma electrolysis deposition
[
Vol.7,
Issue
2
- WinterYear
1395]
mohebbi.fatemeh
investigation the mechanism of the effect of clay nanoparticles on corrosion and wear resistance properties of epoxy nanocomposite coating applied to the surface of the carbon steel substrate
[
Vol.7,
Issue
3
- SpringYear
1396]
Mojir Sheibani.Parman
Synthesis and Characterization of Activated Carbon from Rice husk
[
Vol.11,
Issue
2
- SummerYear
1399]
monshi.ahmad
The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks
[
Vol.6,
Issue
2
- WinterYear
1394]
Montajabiha.mohamad reza
Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91
[
Vol.8,
Issue
3
- SpringYear
1397]
monzavi bozorgi.javad
Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material
[
Vol.7,
Issue
4
- SummerYear
1396]
moosavi nejad.mohsen
Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions
[
Vol.10,
Issue
4
- WinterYear
1398]
Moradi.Moein
Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using the primary sources of Borujerd talc and Abbas Abad calcium carbonate as primary sources
[
Vol.13,
Issue
4
- WinterYear
1401]
Moradi.Moein
Investigating the effect of different sources of magnesium oxide on the structure and final properties of wall tile bodies containing CaO using rapid firing method
[
Vol.14,
Issue
1
- SpringYear
1402]
Moradi.Moein
Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using Zanjan talc and Abbas Abad calcium carbonate as primary sources
[
Vol.13,
Issue
3
- AutumnYear
1401]
Moradi.Moein
Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast A216 alloy
[
Vol.12,
Issue
4
- WinterYear
1400]
Moradi.Mona
Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance
[
Vol.7,
Issue
4
- SummerYear
1396]
Mosalaieepor.Masoud
Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions
[
Vol.10,
Issue
3
- AutumnYear
1398]
moshksar.mohammad mohsen
Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy
[
Vol.8,
Issue
2
- WinterYear
1396]
Moslehi Aragh.Milad
Investigation of Morphology and production efficiency of Produced Nano-Fibers with multi-nozzle electrospinning process
[
Vol.9,
Issue
1
- AutumnYear
1397]
Mosleh-Shirazi.Sareh
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties
[
Vol.14,
Issue
3
- AutumnYear
1402]
motallebi.azadeh
Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline
[
Vol.8,
Issue
1
- AutumnYear
1396]
motevalli.saeid
Production of composite coating of hard chrome – nano alumina by electroplating from the bath of hexa valence chrome and the study of the hardness and abrasive properties
[
Vol.8,
Issue
2
- WinterYear
1396]
Mousavi Ahranjani.Parisa
Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing
[
Vol.13,
Issue
2
- SummerYear
1401]
Mousavi Khoie.Seyed Mohammad
Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method
[
Vol.10,
Issue
2
- SummerYear
1398]
Mousavizade Noghabi.Seyyed Mostafa
Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP)
[
Vol.10,
Issue
3
- AutumnYear
1398]
Mousavizadeh.seyyed Mostafa
Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy
[
Vol.8,
Issue
4
- SummerYear
1397]
N
naeimi.farid
Analysis of Hydrogen-Induced Cracking and Lamination in a Pipeline Steel Based on Fitness-For-Service Assessment
[
Vol.13,
Issue
2
- SummerYear
1401]
Naghdi Chavan.Zahra
Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering
[
Vol.13,
Issue
2
- SummerYear
1401]
Najafi.Abolhasan
Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties
[
Vol.11,
Issue
4
- WinterYear
1399]
Najafi.Abolhassan
Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using the primary sources of Borujerd talc and Abbas Abad calcium carbonate as primary sources
[
Vol.13,
Issue
4
- WinterYear
1401]
Najafi.Abolhassan
Investigating the effect of different sources of magnesium oxide on the structure and final properties of wall tile bodies containing CaO using rapid firing method
[
Vol.14,
Issue
1
- SpringYear
1402]
Najafi.Abolhassan
Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using Zanjan talc and Abbas Abad calcium carbonate as primary sources
[
Vol.13,
Issue
3
- AutumnYear
1401]
Najafi.Abolhassan
Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate
[
Vol.14,
Issue
3
- AutumnYear
1402]
Najafi.Hamidreza
Investigation of gamma precipitation process under effect of strain in Nimonic80A nickel base superalloy
[
Vol.12,
Issue
1
- SpringYear
1400]
Najafi.Seyed Esmaeil
An Investigation of Flow Accelerated(assisted) Erosion-Corrosion in High Pressure Economizer Tubes(HP-EC) of Boiler Unite 1 at Kerman Combined Cycle Power Plant
[
Vol.5,
Issue
1
- AutumnYear
1393]
Najari.Hossein
Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test
[
Vol.6,
Issue
2
- WinterYear
1394]
najmi.lida
The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels
[
Vol.10,
Issue
1
- SpringYear
1398]
Nasirzadeh.Navid
Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications
[
Vol.7,
Issue
3
- SpringYear
1396]
Nasrolāhi.Yadolāh
The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material
[
Vol.6,
Issue
1
- AutumnYear
1394]
Nasseripour.Maryam
Growth and investigation of magnetic and optical properties of Fe3O4@CuO core-shell nanostructures
[
Vol.9,
Issue
2
- WinterYear
1397]
nategh.saeid
Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process
[
Vol.9,
Issue
1
- AutumnYear
1397]
Nayebi.Behzad
Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls
[
Vol.7,
Issue
3
- SpringYear
1396]
nayebzade.ramin
Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes
[
Vol.8,
Issue
2
- WinterYear
1396]
Neyshabouri Mohammadabdi.Atiyeh
The effect of carbon nanotube surface modification on conductivity behavior of carbon nanotube reinforced polythene matrix hybrid HDPE composite with segregate structure
[
Vol.13,
Issue
3
- AutumnYear
1401]
nikkhahi.vida
Investigation of Effect of Milling Time on Final Microstructure of Nanocrystalline TiB2-TiC Powder Fabricated by MACS Method
[
Vol.5,
Issue
1
- AutumnYear
1393]
Nikmardan.Somayeh
Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing
[
Vol.10,
Issue
2
- SummerYear
1398]
Noorbakhsh.Armaghan
Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method
[
Vol.10,
Issue
2
- SummerYear
1398]
Noori.Seyyed Mohammad
Effect of sodium carbonate additive on corrosion behavior of nitrocarburized coating by cathodic plasma electrolytic
[
Vol.9,
Issue
1
- AutumnYear
1397]
Nooryan.Mohammadreza
Fabrication of Cu-Al2O3 composite tubes through electroforming process and investigation on the effect of alumina particles on corrosion resistance of the tubes
[
Vol.11,
Issue
3
- AutumnYear
1399]
Noroozian.Afsar
Investigating the effect of replacing CaO with CaF2 on bioactivity and compressive strength of 45S5 glass ceramic synthesized from soda-lime glass waste by solid state method
[
Vol.14,
Issue
1
- SpringYear
1402]
nosrati.ataollah
A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions
[
Vol.11,
Issue
2
- SummerYear
1399]
Nourbakhs..
Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam
[
Vol.7,
Issue
4
- SummerYear
1396]
Nourbakhsh.Amir Abbas
Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher
[
Vol.6,
Issue
4
- SpringYear
1395]
nouri hasan abadi.keramat allah
Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation
[
Vol.6,
Issue
4
- SpringYear
1395]
Nozari.Hamed
Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent
[
Vol.10,
Issue
4
- WinterYear
1398]
O
OlgaMet.OlgaMet
Investigation of Antibacterial Properties of Silver Nanoparticles and Polyethylene-Silver Nanocomposites
[
Vol.6,
Issue
2
- WinterYear
1394]
Omidi.Mahdi
Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation
[
Vol.10,
Issue
4
- WinterYear
1398]
Omidi.Mahdi
Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process
[
Vol.9,
Issue
1
- AutumnYear
1397]
Omidvar.Hamid
Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system
during the Transient Liquid Phase (TLP)
[
Vol.11,
Issue
1
- SpringYear
1399]
Omidvar.Hamid
Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles
[
Vol.12,
Issue
3
- AutumnYear
1400]
Omodifard.M.A.
Effect of Neodymium and Yttrium oxides on the Structural and Electrochemical Properties of LiFePO4/C Composite as Cathode of lithium ion Batteries Synthesized by Solid State Method
[
Vol.11,
Issue
4
- WinterYear
1399]
Ong.C.K.
The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique
[
Vol.11,
Issue
4
- WinterYear
1399]
Ong.C.K.
The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films
[
Vol.11,
Issue
3
- AutumnYear
1399]
otroj.sasan
Investigation of key Parameters on the Properties of Cordierite Bonded Porous SiC Composites Produced by Reaction-Bonding Method
[
Vol.4,
Issue
6
- SummerYear
1393]
P
Pahlavani.Amir
Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy
[
Vol.6,
Issue
4
- SpringYear
1395]
Pakshir.Mahmoud
Determination of the Degree of Sensitization in AISI 316 Stainless Steel by the Electrochemical Impedance Technique
[
Vol.4,
Issue
6
- SummerYear
1393]
Pakzaman.Hamid Reza
Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition
[
Vol.11,
Issue
3
- AutumnYear
1399]
parvaz.younes
The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth
[
Vol.7,
Issue
2
- WinterYear
1395]
payami.fatemeh
Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3
[
Vol.10,
Issue
1
- SpringYear
1398]
Paydar.Mohammad Hosein
Fabrication of Cu-Al2O3 composite tubes through electroforming process and investigation on the effect of alumina particles on corrosion resistance of the tubes
[
Vol.11,
Issue
3
- AutumnYear
1399]
Paydar.Mohammad Hosein
Synthesizing and investigation on the electrochemical behavior of (Nd0.9La0.1)1.95Sr0.05Ni0.75Cu0.25O4-d and (Nd0.9La0.1)1.9Sr0.1Ni0.75Cu0.25O4-d cathode electrode for solid oxide fuel cell
[
Vol.9,
Issue
1
- AutumnYear
1397]
Paydar.Mohammad Hosein
An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries
[
Vol.6,
Issue
2
- WinterYear
1394]
Paydar.Mohammad Hosein
Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process
[
Vol.11,
Issue
2
- SummerYear
1399]
Paydar.Mohammad Hosein
Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics
[
Vol.10,
Issue
2
- SummerYear
1398]
Paydar.Mohammad Hosein
Comparison of mechanical, electrical and chemical stability of BaCe0.7Zr0.1Y0.2O3-δ (BCZY7)-(Li/Na)2CO3 proton conductive composite electrolytes fabricated by mechanical mixing and infiltration methods
[
Vol.9,
Issue
2
- WinterYear
1397]
paydar.sara
Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell
[
Vol.7,
Issue
4
- SummerYear
1396]
Peyvandi.Parisa
The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel
[
Vol.11,
Issue
2
- SummerYear
1399]
Pirgholi-Givi.Gholamreza
The effect of manganese impurity on the interlayer Al/PVP:CdS/P-Si Schottky structure and its dielectric properties
[
Vol.12,
Issue
1
- SpringYear
1400]
Pirhady Tavandashti.Nahid
Investigation of the Synergistic Effect of Soft and Hard Particles on Corrosion and Wear Resistance Behavior of Ni-B-PTFE-Si3N4 Electroless Coating on Carbon Steel
[
Vol.12,
Issue
1
- SpringYear
1400]
poorchini.pooriya
synthesis and characterization of Al-Al3Ti in-situ composite produced by fsp using reactive mechanically alloyed powder
[
Vol.10,
Issue
4
- WinterYear
1398]
Pourabdollah.Majid
Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method
[
Vol.13,
Issue
2
- SummerYear
1401]
Pourmortazavi.Seied Mahdi
Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method
[
Vol.10,
Issue
1
- SpringYear
1398]
Pourshoja.Arezoo
Introduction: Titanium alloys containing the β phase have much better corrosion resistance. Some alloying elements, such as Mo, stabilize this phase. Among the Ti alloys that contain this element, the Ti-10Mo alloy is of particular importance. If this alloy is produced using selective laser melting (SLM), it will be an approach that is user-friendly due to the nature of the process. Methods: Samples were printed by SLM process. The constituent phases were determined by XRD. The microstructure was evaluated using optical and scanning electron microscopes. Corrosion behavior was evaluated by cyclic potentiodynamic polarization and electrochemical impedance spectroscopy. Findings: In the XRD pattern of pure Ti powder and printed sample, α and α/α' phases are seen, respectively. However, Ti-10Mo powder mixture consists of α and Mo phases, the β phase is more dominant in printed sample because of the Mo penetration in the Ti matrix. As well as, in the microstructure of Ti10Mo the beta phase is seen as Mo-rich streaks, whereas in pure Ti it is found relatively negligible as epitaxially grown primary columnar β grains with acicular α' martensite phase. Mo addition to pure Ti reduces its passive current density and stabilize oxide film. However, Ti-10Mo alloy, with its various phases and galvanic couples, experiences rupture of the passive oxide film at higher potentials, leading to pitting corrosion. The impedance module value of Ti-10Mo is higher than that of pure Ti. Both samples have a double passive oxide film, with Ti-10Mo alloy exhibiting higher resistance than pure Ti.
[
Vol.15,
Issue
1
- SpringYear
1403]
Pouryani.Mohammadhossein
Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2
[
Vol.7,
Issue
4
- SummerYear
1396]
poustdouz.amin
Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties
[
Vol.6,
Issue
1
- AutumnYear
1394]
Pouyafar.Vahid
Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing
[
Vol.10,
Issue
2
- SummerYear
1398]
Rafiei.Mahdi
The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process
[
Vol.10,
Issue
3
- AutumnYear
1398]
Rafienia.Mohammad
Design and fabrication of electrochemical biosensor based on β-CD-Graphene nanocomposite for specific adsorption of curcumin, chlorpromazine and clomipramine
[
Vol.7,
Issue
4
- SummerYear
1396]
rahimi.saadallah
Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding
[
Vol.6,
Issue
1
- AutumnYear
1394]
rahimzadeh.ladan
The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel
[
Vol.11,
Issue
2
- SummerYear
1399]
Ramazani.Haidar
Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time
[
Vol.10,
Issue
2
- SummerYear
1398]
ranjbar.khalil
In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing
[
Vol.8,
Issue
4
- SummerYear
1397]
Ranjbari.Gohar
Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die
[
Vol.11,
Issue
4
- WinterYear
1399]
Ranjbari.Marjan
Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time
[
Vol.14,
Issue
2
- SummerYear
1402]
Ranjbari.Marjan
The role of Ex-situ 0.5wt.% B4C reinforcement and later formed In–situ TiC and TiBw on microstructural evolution of Ti-10Mo mixed powder alloy
[
Vol.13,
Issue
4
- WinterYear
1401]
Rashidi.Ali Mohammad
A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings
[
Vol.11,
Issue
2
- SummerYear
1399]
Rashidi.Ali Mohammad
Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time
[
Vol.10,
Issue
2
- SummerYear
1398]
Rasouli.Maryam
Characterization of Silica Nanoparticles and Nanocolloid Synthesized in Acidic and Alkaline Media
[
Vol.12,
Issue
1
- SpringYear
1400]
Rasti.Batul
An Investigation of Flow Accelerated(assisted) Erosion-Corrosion in High Pressure Economizer Tubes(HP-EC) of Boiler Unite 1 at Kerman Combined Cycle Power Plant
[
Vol.5,
Issue
1
- AutumnYear
1393]
rayatpour.masoume
Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions
[
Vol.11,
Issue
4
- WinterYear
1399]
Razaghian Arani.Ahmad
Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its
electrochemical performance as supercapacitor
[
Vol.11,
Issue
4
- WinterYear
1399]
Razavi.Hussain
Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels
[
Vol.11,
Issue
1
- SpringYear
1399]
razazi boroujeni.mohammad
Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying
[
Vol.14,
Issue
2
- SummerYear
1402]
razazi boroujeni.mohammad
Evaluation of tribological behavior of PEO composite coating containing SiO2 particles on 7075 aluminum alloy
[
Vol.13,
Issue
3
- AutumnYear
1401]
Reihanian.Mohsen
Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions
[
Vol.11,
Issue
3
- AutumnYear
1399]
Rezaei.Atieh
The Effect of Adding Nanodiamond Particles and Heat Treatment on Hardness and Wear Resistance of Ni-P-Nanodiamond Electroless Nanocomposite Coatings
[
Vol.7,
Issue
2
- WinterYear
1395]
Rezaei.Mehdi
Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions
[
Vol.11,
Issue
3
- AutumnYear
1399]
Rezaeian-delouei.Mehdi
Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP)
[
Vol.10,
Issue
3
- AutumnYear
1398]
Rezaeii Kheybari.Ehsan
Study on hot deformation behaviuor of Mg-7.1Gd-2.8Y-1.3Nd-0.4Zn magnesium alloy using hyperbolic sine equation and processing maps
[
Vol.11,
Issue
1
- SpringYear
1399]
rezaie.Navid
Synthesis and characterization of copper based spinel coating on alumina substrate for spark plug aero-engine application
[
Vol.12,
Issue
3
- AutumnYear
1400]
Rezazadeh.Hadi
Spark plasma sintering of aluminum 3000 and 5000 alloys powder obtained from recycling of Used Beverage Cans (UBCs)
[
Vol.14,
Issue
4
- WinterYear
1402]
Rezazadeh.Hadi
Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method
[
Vol.14,
Issue
1
- SpringYear
1402]
Roodaki.Morteza
A detailed DOE study on temperature, concentration and their interactions on corrosion protection of carbon steel
[
Vol.12,
Issue
3
- AutumnYear
1400]
Rostami.Abbas
The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process
[
Vol.10,
Issue
3
- AutumnYear
1398]
Rostami.Mohammad Reza
Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process
[
Vol.9,
Issue
1
- AutumnYear
1397]
S
Saadat.Abbas
Investigating on effect of heat treatment on microstructure and metallurgical properties of three layers explosively bonded Cu/Al/Cu plates
[
Vol.8,
Issue
2
- WinterYear
1396]
Sabahi Namini.Abbas
Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time
[
Vol.14,
Issue
2
- SummerYear
1402]
Sabahi Namini.Abbas
The role of Ex-situ 0.5wt.% B4C reinforcement and later formed In–situ TiC and TiBw on microstructural evolution of Ti-10Mo mixed powder alloy
[
Vol.13,
Issue
4
- WinterYear
1401]
Saberi Sani.Gholam Reza
Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal
[
Vol.11,
Issue
1
- SpringYear
1399]
sabet.hamed
Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process
[
Vol.8,
Issue
2
- WinterYear
1396]
Sabet.Hamed
analysis of plastic instability during sandwich sheet rolling
[
Vol.1,
Issue
1
- AutumnYear
1389]
Sabet.Hamed
The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method
[
Vol.14,
Issue
2
- SummerYear
1402]
Sabet.Hamed
Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW)
[
Vol.6,
Issue
1
- AutumnYear
1394]
Sabet.Hamed
The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process
[
Vol.8,
Issue
3
- SpringYear
1397]
Sabet.Hamed
Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal
[
Vol.11,
Issue
1
- SpringYear
1399]
Sabet.Hamed
Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels
[
Vol.11,
Issue
1
- SpringYear
1399]
Sabet.Hamed
Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel
[
Vol.11,
Issue
2
- SummerYear
1399]
Sadeghi Gooqhari.Mehran
Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products
[
Vol.8,
Issue
1
- AutumnYear
1396]
sadeghi.esmaeil
Fabrication of Aluminum Foam by ARB and Investigation
on Its Friction Stir Welded Joint Properties
[
Vol.5,
Issue
1
- AutumnYear
1393]
SADEGHI.MOHAMMAD
Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels
[
Vol.11,
Issue
1
- SpringYear
1399]
sadeghian.zohreh
synthesis and characterization of Al-Al3Ti in-situ composite produced by fsp using reactive mechanically alloyed powder
[
Vol.10,
Issue
4
- WinterYear
1398]
Sadeghian.Zohreh
Fabrication of Ti Bulk amorphous alloys by mechanical alloying and plasma sintering methods and evaluation of structure and corrosion behavior
[
Vol.15,
Issue
1
- SpringYear
1403]
Sadough.Ali
Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment
[
Vol.6,
Issue
1
- AutumnYear
1394]
Saebnoori.Ehsan
Inhibition of Copper Corrosion by Self-Assembled Thin Films of Schiff Bases in Acidic Media
[
Vol.5,
Issue
1
- AutumnYear
1393]
Saebnoori.Ehsan
Investigation on the effect of frequency and duty cycle on nano-crystalline TiO2 coatings produced by plasma electrolytic oxidation
[
Vol.9,
Issue
1
- AutumnYear
1397]
Saeedi.Mina
Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method
[
Vol.8,
Issue
1
- AutumnYear
1396]
Saeedi.Mina
Investigation on the effect of Al addition on synthesis of Ti3SiC2 nanostructure by Mechanical alloying – heat treatment method
[
Vol.8,
Issue
2
- WinterYear
1396]
Safa.Mina
Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing
[
Vol.13,
Issue
2
- SummerYear
1401]
safarkhanian.mohamad ali
Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy
[
Vol.10,
Issue
2
- SummerYear
1398]
safavi.mohamadreza
preparation and evaluation of mechanical and thermal properties of epoxy/silica nanocomposites
[
Vol.8,
Issue
3
- SpringYear
1397]
safaviyeh.soheila
Effect of mechanical alloying and heat treatment process on the phase transformation of Ni-Cr-Al powders mixture
[
Vol.1,
Issue
1
- AutumnYear
1389]
SAFAVIYEH.SOHEILA
Evaluation of microsegregation during dendritic solidification of a binary alloy using phase field method and analytical models
[
Vol.1,
Issue
1
- AutumnYear
1389]
SAFAVIYEH.SOHEILA
In Situ fabrication of (Cu-Cr)-Al2O3 nanocomposite
[
Vol.1,
Issue
1
- AutumnYear
1389]
Saghafi Yazdi.Morteza
Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its
electrochemical performance as supercapacitor
[
Vol.11,
Issue
4
- WinterYear
1399]
Saghafi.Ali-Akbar
Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine
[
Vol.11,
Issue
4
- WinterYear
1399]
Saghafiyan.Hsan
The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC
[
Vol.8,
Issue
3
- SpringYear
1397]
sahebian saghi.samaneh
The effect of carbon nanotube surface modification on conductivity behavior of carbon nanotube reinforced polythene matrix hybrid HDPE composite with segregate structure
[
Vol.13,
Issue
3
- AutumnYear
1401]
Sajedipour.Davood
The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process
[
Vol.7,
Issue
1
- AutumnYear
1395]
Sajjadi.Seyed Abdolkarim
Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA)
[
Vol.8,
Issue
3
- SpringYear
1397]
Sajjadi.Seyed Abdolkarim
Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system
during the Transient Liquid Phase (TLP)
[
Vol.11,
Issue
1
- SpringYear
1399]
Sajjadnejad.Mohammad
Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide
[
Vol.12,
Issue
2
- SummerYear
1400]
Sakhtemanian.Mohammad Reza
The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process
[
Vol.8,
Issue
4
- SummerYear
1397]
Salmani.Mahdiye
Investigation of electrophoretic parameters of TiO2 nanoparticles for fabricating photoanode of dye sensitized solar cells
[
Vol.9,
Issue
1
- AutumnYear
1397]
Samadi.Farzad
The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding
[
Vol.8,
Issue
2
- WinterYear
1396]
samadipour.azam
Synthesis of Microspheres Cr2O3/C by Changing the Synthesis’ Parameters and Evaluation of Electrochemical Properties of Microspheres
[
Vol.8,
Issue
2
- WinterYear
1396]
sazegaran.hamid
Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron
[
Vol.6,
Issue
2
- WinterYear
1394]
Sedehi.Sayyed Mohammadreza
A Review of the Most Important Methods for Severe Plastic Deformation of Titanium
[
Vol.14,
Issue
2
- SummerYear
1402]
seifolahzade.ali
Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders
[
Vol.6,
Issue
3
- SummerYear
1395]
Seyedein.S. H.
Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas
[
Vol.14,
Issue
1
- SpringYear
1402]
Shaban Ghazani.Mehdi
Application of the combination of extrusion and equal channel angular pressing for processing fine grained and nanostructured metallic materials
[
Vol.10,
Issue
4
- WinterYear
1398]
Shaban Ghazani.Mehdi
Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP)
[
Vol.6,
Issue
2
- WinterYear
1394]
Shafie.Mohammad esmaeil
Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process
[
Vol.9,
Issue
1
- AutumnYear
1397]
Shafiee.Bahman
Chemical reduction synthesis of copper nanoparticles in aqueous media in present of maleic acid and polyvinylpyrrolidone (PVP)
[
Vol.8,
Issue
1
- AutumnYear
1396]
Shafieian.Zahra
Applying Titania and Hydroxyapatite coating on Ti-6Al-4V by PEO and hydrothermal processes and investigating its corrosion behavior in simulated body environment
[
Vol.1,
Issue
1
- AutumnYear
1389]
Shahbaz.Amirhosein
The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method
[
Vol.14,
Issue
2
- SummerYear
1402]
shahedi asl.mehdi
Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls
[
Vol.7,
Issue
3
- SpringYear
1396]
Shahedi Asl.Mehdi
Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite
[
Vol.8,
Issue
3
- SpringYear
1397]
Shahnazari.Zahra
Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite
[
Vol.10,
Issue
3
- AutumnYear
1398]
shahraki.aziz
Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2
[
Vol.7,
Issue
4
- SummerYear
1396]
Shahraki.Mehdi
Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties
[
Vol.8,
Issue
2
- WinterYear
1396]
Shahriari Nogorani.Farhad
Modification of the surface morphology of atmospheric plasma
sprayed tungsten coating for X-ray tube application
[
Vol.8,
Issue
4
- SummerYear
1397]
Shamanian.Morteza
Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel
[
Vol.8,
Issue
2
- WinterYear
1396]
shamsi.Asghar
Experimental study of forming Parts with central blister by Incremental forming process with positive-negative forming pattern
[
Vol.10,
Issue
4
- WinterYear
1398]
shamsi.fariba
Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation
[
Vol.6,
Issue
3
- SummerYear
1395]
shariat.mohammadhossein
Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell
[
Vol.7,
Issue
4
- SummerYear
1396]
sharifi.ghorbanali
Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation
[
Vol.6,
Issue
2
- WinterYear
1394]
Shayanzadeh Moghadam.Tahereh
Synthesis of barium carbonate by mechanochemical method
[
Vol.13,
Issue
2
- SummerYear
1401]
Sheybani Tezerji.Kazem
Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process
[
Vol.11,
Issue
2
- SummerYear
1399]
Shirani.Hassan
Synthesizing and investigation on the electrochemical behavior of (Nd0.9La0.1)1.95Sr0.05Ni0.75Cu0.25O4-d and (Nd0.9La0.1)1.9Sr0.1Ni0.75Cu0.25O4-d cathode electrode for solid oxide fuel cell
[
Vol.9,
Issue
1
- AutumnYear
1397]
Shirazi.Mehrnaz
The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying
[
Vol.6,
Issue
1
- AutumnYear
1394]
Shishesaz.Mohammad
The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material
[
Vol.6,
Issue
1
- AutumnYear
1394]
Shokrgozar mojarad.Bahareh
Investigation onthe effect of both Content and Type of Carbon on Low Temperature Synthesis of SiC by Using Magnesiothermal Reduction Process
[
Vol.5,
Issue
1
- AutumnYear
1393]
Shyegh.Behrooz
Synthesis of Microspheres Cr2O3/C by Changing the Synthesis’ Parameters and Evaluation of Electrochemical Properties of Microspheres
[
Vol.8,
Issue
2
- WinterYear
1396]
Soleimani.Fatemeh
Effect of TiC and TiB2 Reinforcement Phase Addition on Mechanical and Tribological Properties of NiAl-TiC-TiB2 Composite Produced Through Combustion Synthesis Process
[
Vol.12,
Issue
2
- SummerYear
1400]
Soleymani.Farzad
Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate
[
Vol.14,
Issue
3
- AutumnYear
1402]
Soltani Dehnavi.Akbar
Investigating on effect of heat treatment on microstructure and metallurgical properties of three layers explosively bonded Cu/Al/Cu plates
[
Vol.8,
Issue
2
- WinterYear
1396]
Soltanieh.Mansour
The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide
[
Vol.11,
Issue
3
- AutumnYear
1399]
Soltanieh.Mansour
Effect of TiC and TiB2 Reinforcement Phase Addition on Mechanical and Tribological Properties of NiAl-TiC-TiB2 Composite Produced Through Combustion Synthesis Process
[
Vol.12,
Issue
2
- SummerYear
1400]
T
tabasi.maryam
An Experimental and Simulational Investigation on Schiff-base Complex of Cobalt and Corresponding Ligand as Corrosion Inhibitor in Acidic Solution
[
Vol.5,
Issue
1
- AutumnYear
1393]
Tabrizi.Sepide
The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying
[
Vol.6,
Issue
1
- AutumnYear
1394]
Tabrizian.Parinaz
Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies
[
Vol.10,
Issue
1
- SpringYear
1398]
Tadayonsaidi.Mehran
Application of the response surface method in optimizing the thickness and hardness of vanadium carbide coatings created by the electrolytic plasma method
[
Vol.9,
Issue
2
- WinterYear
1397]
Tafakh.sahereh
Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method
[
Vol.11,
Issue
2
- SummerYear
1399]
taghizade.zahra
The performance of self-assembled thin film of imidazole used in organic-inorganic hybrid coating on corrosion inhibition of carbon steel in acidic solution
[
Vol.6,
Issue
4
- SpringYear
1395]
Taghvaei.Amir Hossein
Effect of PCA addition on microstructural and magnetic Properties a new Fe-based amorphous alloy prepared by Mechanical Alloying
[
Vol.9,
Issue
2
- WinterYear
1397]
Taghvaei.Amir Hossein
Effect of milling time and investigation of thermodynamic analysis on amorphous phase formation in Fe-C-Ta alloy prepared by mechanical alloying
[
Vol.8,
Issue
3
- SpringYear
1397]
tahanpesar.elham
Stabilization of Doxorubicin Drug on Graphene Oxide Nanosystem and Computer simulation Study (In-Silico) on Topoisomerase II Enzyme
[
Vol.15,
Issue
1
- SpringYear
1403]
Tajabadi.Hossein
Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation
[
Vol.6,
Issue
2
- WinterYear
1394]
Tajally.Mohammad
Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP)
[
Vol.10,
Issue
3
- AutumnYear
1398]
Tajally.Mohammad
Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method
[
Vol.10,
Issue
2
- SummerYear
1398]
Tajbakhsh.Morteza
Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties
[
Vol.6,
Issue
1
- AutumnYear
1394]
Tajbakhsh.Parisa
Mechanical and Corrosion Properties of Graphene Oxide-Copper Nano-composites produced by the accumulative Roll Bonding (ARB) method
[
Vol.11,
Issue
1
- SpringYear
1399]
Takbiri.Mohammadjavad
Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior
[
Vol.6,
Issue
1
- AutumnYear
1394]
Tarahomnejad.Mohammad Ali
Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process
[
Vol.5,
Issue
1
- AutumnYear
1393]
Tavakkoli.Haman
Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3
[
Vol.10,
Issue
1
- SpringYear
1398]
Tavakoli.Hossein
Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method
[
Vol.10,
Issue
2
- SummerYear
1398]
tavassoli.soheil
The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting
[
Vol.7,
Issue
3
- SpringYear
1396]
Tayebifard.Ali
Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS)
[
Vol.7,
Issue
1
- AutumnYear
1395]
Tohidi.Maryam
Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent
[
Vol.10,
Issue
2
- SummerYear
1398]
toofan.samin
synthesis and investigation of solid electrolyte ion conducting lithium aluminium titanium phosphate
[
Vol.10,
Issue
2
- SummerYear
1398]
toorani.heidar
Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy
[
Vol.10,
Issue
2
- SummerYear
1398]
V
Vadi.Mehdi
Efficient Removal of Omeprazole from Water Samples by Utilizing of Carbon Nanotubes as Powerful nanoadsorbent and Comprising with Graphite: Kinetic and Thermodynamic studies
[
Vol.12,
Issue
4
- WinterYear
1400]
Vaez.ahmad
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties
[
Vol.14,
Issue
3
- AutumnYear
1402]
Vafa.Ehsan
A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties
[
Vol.14,
Issue
3
- AutumnYear
1402]
Vahedi.Samaneh
Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its
electrochemical performance as supercapacitor
[
Vol.11,
Issue
4
- WinterYear
1399]
Vahidshad.Yaser
An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding
[
Vol.10,
Issue
4
- WinterYear
1398]
vajd.akbar
Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP)
[
Vol.6,
Issue
2
- WinterYear
1394]
vajd.akbar
Microstructural Grading of Al-11 wt.%Mg2Si Hypoeutectic Alloy by Centrifugal Casting
[
Vol.1,
Issue
1
- AutumnYear
1389]
Welham.Nicholas J.
A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions
[
Vol.11,
Issue
2
- SummerYear
1399]
Y
YAGHTIN.AMIRHOSSEIN
Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process
[
Vol.6,
Issue
1
- AutumnYear
1394]
yarali.davood
Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties
[
Vol.8,
Issue
4
- SummerYear
1397]
Yazdizade Khalili.Abbas
Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions
[
Vol.10,
Issue
3
- AutumnYear
1398]
Yeganeh.Mahdi
THE EFFECT OF MICROSTRUCTURAL CHANGES ON THE CORROSION PROPERTIES OF 310S AUSTENITIC STAINLESS STEEL AFTER THERMOMECHANICAL TREATMENT
[
Vol.13,
Issue
1
- SpringYear
1401]
yousefi.khadije
Optimization of physical and mechanical properties of calcium silicate nanocomposite by Taguchi method
[
Vol.11,
Issue
1
- SpringYear
1399]
Z
zaarei.davood
Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline
[
Vol.8,
Issue
1
- AutumnYear
1396]
Zahmatkeshani.Fatemeh
Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent
[
Vol.10,
Issue
2
- SummerYear
1398]
Zakerhaghighi.H
Investigation of the effect of orthotropic parameters in failure of orthotropic materials under the rolling contact
[
Vol.10,
Issue
3
- AutumnYear
1398]
Zakeri.Ahmad
Investigation on the Effects of Using Salt Water Bathroom Quenching on the Corrosion Behavior of Hadfield Manganese Steel
[
Vol.6,
Issue
3
- SummerYear
1395]
Zakeri.Ahmad
An investigation on the effects of interpass temperature on corrosion behavior of weld metal of Hadfield high carbon steel weld joint
[
Vol.8,
Issue
1
- AutumnYear
1396]
Zakeri.Ahmad
Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel
[
Vol.7,
Issue
3
- SpringYear
1396]
Zamani.Cyrus
Synthesis and Characterization of Activated Carbon from Rice husk
[
Vol.11,
Issue
2
- SummerYear
1399]
Zamani.Reza
Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method
[
Vol.8,
Issue
1
- AutumnYear
1396]
Zandrahimi.Morteza
Production of Open Cell Copper Foam and assessment of foam Substructure
[
Vol.8,
Issue
3
- SpringYear
1397]
Zangeneh.Shahab
Analysis of Hydrogen-Induced Cracking and Lamination in a Pipeline Steel Based on Fitness-For-Service Assessment
[
Vol.13,
Issue
2
- SummerYear
1401]
Zare Dehnov.Fatemeh
Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers
[
Vol.11,
Issue
3
- AutumnYear
1399]
Zare Neyrizi.Hassan
Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology
[
Vol.12,
Issue
1
- SpringYear
1400]
Zare.Mehran
Effect of nano Si3N4، Al2O3 و AlMg and cold rolling process on the microstructural and mechanical properties of AL-6061alloy
[
Vol.10,
Issue
1
- SpringYear
1398]
zarei.hamed
protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy
[
Vol.10,
Issue
2
- SummerYear
1398]
zarei.omid
protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy
[
Vol.10,
Issue
2
- SummerYear
1398]
Zareiinejad.Sara
Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating
[
Vol.11,
Issue
1
- SpringYear
1399]
Zareinezhad.Reza
synthesis and Identification of superparamagnetic graphene oxide- Iron oxide nanoparticles coated by chitosan and modified by Amino acid
[
Vol.9,
Issue
2
- WinterYear
1397]
Zarenezhad.Hamaneh
Effect of Chlorine in Perovskite Layers Morphology and Efficiency of Perovskite Solar Cells in One step & Spin-Dip Deposition Methods
[
Vol.9,
Issue
2
- WinterYear
1397]
zarghani.fateme
Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy
[
Vol.8,
Issue
4
- SummerYear
1397]
zarghani.fateme
protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy
[
Vol.10,
Issue
2
- SummerYear
1398]
Zebarjad.Seyed Mojtaba
An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core
[
Vol.7,
Issue
3
- SpringYear
1396]
Zebarjad.Seyed Mojtaba
Microstructure Evaluation of Al Nanocomposite Foam Reinforced with SiO2 Nanoparticles Produced using Ultrasonic Technique
[
Vol.4,
Issue
6
- SummerYear
1393]
Zebarjad.Seyed Mojtaba
Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling
[
Vol.3,
Issue
4
- WinterYear
1391]
Zebarjad.Seyed Mojtaba
Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid)
[
Vol.6,
Issue
1
- AutumnYear
1394]
Zebarjad.Seyed Mojtaba
Characterization of Silica Nanoparticles and Nanocolloid Synthesized in Acidic and Alkaline Media
[
Vol.12,
Issue
1
- SpringYear
1400]
Zebarjad.Seyed Mojtaba
Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core
[
Vol.6,
Issue
2
- WinterYear
1394]
Zebarjad.Seyed Mojtaba
Investigating the simultaneous role of clay nanoparticles and strain rate on the tensile behavior of polyethylene matrix nanocomposite
[
Vol.13,
Issue
4
- WinterYear
1401]
Zebarjad.Seyed Mojtaba
The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels
[
Vol.10,
Issue
1
- SpringYear
1398]
Zebarjad.Seyed Mojtaba
The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel
[
Vol.8,
Issue
1
- AutumnYear
1396]
zeynolabedintabar.MORTEZA
Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering
[
Vol.6,
Issue
1
- AutumnYear
1394]
Ziraki.Sahar
Investigating the Effect of Co-Precipitation Synthesis Time of LiNi0.8Co0.15Al0.05O2 Cathode and Its Structural and Electrochemical Evaluation in Lithium-ion Battery
[
Vol.13,
Issue
1
- SpringYear
1401]