Subject Areas : journal of New Materials

مجتبی صالحی ¹ , حسین مهمان نواز ² , غلامرضا کرباسیان ³ , مرتضی رحمانی ⁴

1 - دانش آموخته کارشناسی ارشد، مهندسی مواد، دانشگاه صنعتی امیرکبیر
2 - دانش آموخته کارشناسی ارشد، مهندسی مکانیک، دانشگاه علم و صنعت ایران
3 - دانش آموخته کارشناسی، مهندسی مواد، دانشگاه آزاد اسلامی-واحد ساوه
4 - دانش آموخته کارشناسی ارشد، مهندسی مکانیک، دانشگاه صنعتی امیرکبیر

Received: 2015-09-21 Accepted : 2015-09-21 Published : 2015-08-23

Keywords:

References:

1- ز. گلستان، م. جاویدی، م. ح.شریعت و ر. بازرگان لاری، پوشش دهی کامپوزیتی هیدروکسی آپاتیت-تیتانیا همزمان با نیتروکربوره کردن الکترولیتی پلاسمایی روی سطح فولاد ضد زنگ و بررسی رفتارخوردگی آن، مجله مواد نوین/ جلد3/ شماره 4/ تابستان 1392.

2- N. Markocsan, P. Nylen,  J. Wigren, X.-H.Li, A. Tricoire,, "Effect of Thermal Aging on Microstructure and Functional Properties of Zirconia-Base Thermal Barrier Coatings", Journal of Thermal Spray Technology, Vol. 18, pp. 201–208, 2009.

3- P. F. Zhao, C.A. Sun, X.Y. Zhu, F.L. Shang, C.J. Li, "Fracture Toughness M of Plasma-Sprayed Thermal Barrier Coatings Using a Modified Four-Point Bending method", Surface & Coatings Technology, Vol. 204, pp. 4066-4074, 2010.

4- U. Schulz, M. Peters, Fr.-W. Bach, G. Tegeder,"Graded Coatings for Thermal, Wear and Corrosion Barriers", Materials Science and Engineering A, Vol. 362, pp. 61-80, 2003.

5- M. Khoddami, A.Sabour, S.M.M.Hadavi,"Microstructure Formation in thermally-Sprayed Duplex and Functionally Graded NiCrAlY/Yttria-Stabilized Zirconia Coatings", Surface & Coatings Technology, Vol. 201, pp. 6019-6024, 2007.

6- B.Saeedi, A.Sabour, A. M.Khoddami,"Study of microstructure and thermal shock Behavior of Two Types of Thermal Barrier Coatings", Materials and Corrosion Vol. 60, pp. 695-703, 2009.

7- A. Kawasaki, R.Watanabe, "Thermal Fracture Behavior of Metal/Ceramic Functionally graded materials". Engineering Fracture Mechanics, Vol. 69, pp. 1713-1728, 2002.

 

8- K.Kokini, J. DeJonge, S. Rangaraj, B. Beardsley, "Thermal Shock of Functionally Graded Thermal Barrier Coatings with Similar Thermal Resistance". Surface and Coatings Technology, Vol. 154, pp. 223-231, 2002.

9- Raj, S.V., L. J. Ghosn, C. Robinson, D. Humphrey, "High Heat Flux Exposures of Coated GRCop-84 Substrates". Materials Science and Engineering: A, Vol. 457: pp. 300-312, 2007.

10- B.D. Choules, K. Kokini, T.A. Taylor, "Thermal Fracture of Thermal Barrier Coatings in a High Heat Flux Environment". Surface and Coatings Technology, Vol. 106, pp. 23-29, 1998.

11- B.D.Choules, K. Kokini,T.A. Taylor, "Thermal Fracture of Ceramic Thermal Barrier Coatings Under High Heat Flux with Time-Dependent Behavior. Part 1. Experimental results", Materials Science and Engineering A, Vol. 299, pp. 296-304, 2001.

12- وکیلی فرد, ح," بررسی و بهینه سازی پارامترهای موثر بر خواص پوشش¬های سد حراتی YSZ-MCrAlY بر روی سوپرآلیاژ پایه نیکل به کمک روش طراحی آزمایش ها"، کارشناسی ارشد پژوهشکده مواد و انرژی، تهران، 1390.

D.R. Gaskell, Introduction to the Thermodynamics of Materials, 4^th ed., New York, 2003.

13- K.A. Khor, Z.L. Dong, Y.W. Gu,"Infuence of Oxide Mixtures on Mechanical Properties of Plasmasprayed Functionally Graded Coating". Thin Solid Films, Vol. 368, pp. 86-92, 2000.

14- K.A. Khor, Y.W. Gu, Z.L. Dong, "Mechanical behavior of plasma sprayed Functionally Graded YSZ-NiCoCrAlY Composite Coatings". Surface and Coatings Technology, Vol. 139, pp. 200-206, 2001.

15- J. Shin, S.K. Hur, C.G. Ha, Y.G. Jung, U. Paik, "Mechanical characterization in PSZ/NiCrAlY Composites Fabricated by Plasma Activated Sintering". Journal of Alloys and Compounds, Vol. 313, pp. 248-257, 2000.

16- K. Kokini, Y. R. Takeuchi, B. D. Choules, "Surface Thermal Cracking of Thermal Barrier Coatings Owing to Stress Rrelaxation: Zirconia Vs. Mullite". Surface and Coatings Technology, Vol. 82, pp. 77-82, 1996.

17- A. Ohmori, C-J. Li,"Quantitative Characterization of the Structure of Plasma-Sprayed Al2O3 Coating by Using Copper Electroplating". Thin Solid Films, Vol. 201, pp. 241-252, 1991.

18- C.J. Li, W.Z. Wang, "Quantitative Characterization of Lamellar Microstructure of Plasma-Sprayed Ceramic Coatings Through Visualization of Void Distribution". Materials Science and Engineering: A, Vol. 386, pp. 10-19, 2004.

19- C.J. Li, , W.Z. Wang, Y. He, "Dependency of Fracture Toughness of Plasma Sprayed Al2O3 Coatings on Lamellar Structure". Journal of Thermal Spray Technology, Vol. 13, pp. 425-431, 2004.

20- H. Xiong, A.Kawasaki, Y. Kang, R.Watanabe, "Experimental Study on Heat Insulation Performance of Functionally Graded Metal/Ceramic Coatings and Their Fracture Behavior at High Surface Temperatures". Surface and Coatings Technology, Vol. 194, pp. 203-214, 2005.

21- B.D. Choules, "Thermal Fracture of Ceramic Coating Under High Heat Flux with Time-Dependence Behavior", ph. D. Thesis Purdue University, West Lafayette, 1998.