Subject Areas : journal of New Materials

احمدرضا عارف پور ¹ , احمد منشی ² , محمدرضا فروغی ³ , حمیدرضا ربیعی ⁴ , مرضیه ابراهیمیان ⁵

1 - کارشناس ارشد دانشکده مهندسی مواد، دانشگاه ازاد اسلامی واحد نجف آباد اصفهان،اصفهان، ایران.
2 - استاد، دانشکده مهندسی مواد، دانشگاه ازاد اسلامی واحد نجف آباد اصفهان، اصفهان، ایران
3 - کارشناس ارشد دانشکده مهندسی مواد، دانشگاه ازاد اسلامی واحد نجف آباد اصفهان،اصفهان، ایران.
4 - دانشجوی کارشناس ارشد دانشکده مهندسی مواد، دانشگاه ازاد اسلامی واحد نجف آباد اصفهان، اصفهان، ایران.
5 - کارشناس ارشد دانشکده مهندسی مواد، دانشگاه صنعتی اصفهان، اصفهان، ایران.

Received: 2015-12-28 Accepted : 2015-12-28 Published : 2012-09-22

Keywords:

References:

1- J.Y. Chung, "Improvements & innovationsin the continuous casting process at POSCO",Materials Science Forum, Vol. 561, pp. 3-4,2007.

2- A. Morita, T. Omoto and Y. Iwamoto,"Molding powder for continuous casting ofsteel and a method for continuous casting ofsteel", United States Patent, No.US00641402B1, 2002.

3- H. Lidefelt and P. Hasselstrom,"Characterization of the Functional Propertiesof Mould Powders for Continuous casting ofsteel", china, 4th International Iron and SteelCongress Proceedings, 1982.

4- M. Nakamoto, Y. Miyabayashi, L. Holappaand T. Tanaka, "A Model for EstimatingViscosities of Aluminosilicate Melts

Containing Alkali Oxides", ISIJ International,Vol. 47, No. 10, pp. 1409-1415, 2007.

5- E.T. Turkdogan, "Fundamentals ofsteelmaking", Cambridge : The UniversityPress, pp. 138-179, 1996.

6- M. Mueller, W. Willenborg, K. Hilpert andL. Singheiser, "Structural dependence of alkalioxide activity in coal ash slage", VIIInternational Conference on molten slage,fluxes and salts, The South African Institute ofMinig and Metallurgy, 2004.

7- M. Nakamoto, J. Lee and T. Tanaka, "AModel for Estimation of Molten Silicate Slag",ISIJ International, Vol. 45, No. 5, pp. 651-656,2005.

8- S. Sridhar, "Estimation Models for MoltenSlag and Alloy Viscosities", JOM, pp. 46-48,2005.

9- R.F. Brooks, A.T. Dinsdale and P.N.Quested, "The measurement of viscosity ofalloys –a review of methods, data and models",Meas. Sci. Technol., Vol. 16, pp. 354-362,2005.

10- Q. Shu and J. Zhang, "Viscosity Estimatinfor Slags Containing Clacium Fluoride",Journal of University of Science andTechnology Beijing, Vol. 12, p. 221, 2005.

11- P.V.Riboud and M. Larrecq, "Fundamentalstudy of the behavior of casting powders", ISIJ

International, Vol. 36, pp. 522-525, 1996.

12- C. Orrling, A.W. Cramb, A. Tilliander anY. Kashiwaya,"Observations of the melting

and solidification behavior of mold slags", Ironand steelmaker, Vol. 27, No. 1, pp. 53-63,

2000 .

13- S. Feldbauer, I. Jimbo, A. Sharan, K.Shimizu, W. king, J. Stepanek, J. Harman and

A.W. Cramb, "Physical properties of moldslags that are relevant to clean steelmanufacture", Proceedings 78th SteelmakingConference, Nashville, Iron & Steel Society,pp. 655-667, 1995.

14- K.C.Mills, S. Sridhar, A.S. Normanton andS.T. Mallaband, "Mould flux behavior incontinuous casting",japan, The BrimacombeMemorial Symposium, pp. 781-794, 2000.

15- P.V. Riboud, Y. Roux, L.D. Lucas and H.Gaye, "Improvement of Continuous CastingPowders", Fachber. Huttenprax.

Metallweiterverarb., Vol. 19, p. 859, 1981.

16- G. Urbain, F. Cambier, M. Deletter andM.R. Anseau, "Viscosity of Silicate Melts",Transaction and Journal of British CeramicsSociety, Vol. 80, p. 139, 1981 .

17- E.T. Turkdogan, "PhysicochemicalProperties of Molten Slags and Glasses", TheMetals Society, p. 11, 1983.

18- S. Seetgraman, D. Sichen and F.Z. Ji,"Estimation of Viscosities of Ternary SilicateMelts using the Excess Gibbs Energy ofMixing", Metallurgical and MaterialsTransaction B, Vol. 31B, p. 105, 2000.

19- L. Zhang and S. Jahanshahi, "Review andModeling of Viscosity of Silicate Melts: Part I.Viscosity of Binary and Ternary SilicatesContaining CaO, MgO and MnO",Metallurgical and Materials Transactions B,Vol. 29B, issue.1, p. 177, 1998.7