Subject Areas : journal of New Materials

سید عبد المجید خادم ¹ , کریم زنگنه مدار ² , ابراهیم خزایی ³ , تقی شجاعی ⁴

1 - استادیار دانشگاه آزاد اسلامی، واحد ساوه، گروه مهندسی مواد، ساوه، ایران.
2 - دانشیار گروه مهندسی مواد دانشگاه صنعتی مالک اشتر، تهران، ایران.
3 - دانش آموخته کارشناسی ارشد، دانشگاه آزاد اسلامی، واحد ساوه، گروه مهندسی مواد، ساوه، ایران.
4 - مدرس گروه هوافضای مرکز تحقیقات آیرودینامیک قدر،دانشگاه جامع امام حسین(ع)، تهران، ایران.

Received: 2015-09-21 Accepted : 2015-09-21 Published : 2015-08-23

Keywords:

References:

1- I.A. Ibrahim, F.A. Mohamed, and E.J. Lavemi,"Particulate Reinforced Metal Matrix Composite", Journal of Mater Science, 26, pp. 1137-1156, 1991.

2- Y.X. Lu, X.M. Meng, and C.S. Lee, "Microstructure and Mechanical Behavior of a SiC Particles Reinforced Al-5Cu Composite Under Dynamic Loading", Journal of Mater Processing Technology, 94, pp. 175-178, 1999.

3- Z. Yu-Tao, Z. Song-Li, and CHEN Gang.,"Aluminum Matrix composites reinforced by in situ Al₂O₃ and Al₃Zr Particles Fabricated Via Magnetochemistry Reaction",Trans. Nonferrous Met. Soc. Chi08/9*-/*]= M na 20. 2129-2133, 2010.

4- B. Kaveendran, G.S. Wang, L.J. Huang, L. Geng, H.X. Peng. ," In Situ (Al₃Zr + Al₂O₃np)/2024Al Metal Matrix Composite with Novel Reinforcement Distributions Fabricated by Reaction Hot Pressing", Journal of Alloys and Compounds 581, pp. 16–22, 2013.

5- J.S. Benjamin, E. Artz, and C. Schultz,"New Materials by Mechanical Alloying Techniques", Colw-Hirson (FRG), pp. 3-19, 1998.

6- Y. Chank, S. Berger, B. Z. Weiss, and Broolc-Levinson, "Solid State Amorphization by Mechanical Alloying- an Atomistic Model", Acta Matter, vol. 42, No. 11, pp. 3679-3685, 1994.

7- C. Suryanarayana, Mechanical Alloying and Milling, Marcel Dekker, New York, 2004.

8- K.I. Moon, K.S. Lee, and J.“Study of the Microstructure of Nanocrystalline Al-Ti Alloys Synthesized by Ball Milling in a Hhydrogen Aatmosphere and Hot Extrusion,”Alloy. Compd. 291, pp. 312–321, 1999.

10- T.T. Sasaki, T. Mukai, and K. Hono, "A High-Strength Bulk Nanocrystalline Al–Fe alloy Processed by Mechanical Alloying and Spark Plasma Sintering",Scripta Mater. 57, pp. 189–192, 2007.

12- H. Wang, G. Li, Y. Zhao, and Z. Zhang. ," Microstructure, Billet Surface Quality and Tensile Property of (Al₂O₃ +Al₃Zr)p/Al Composites in Situ Synthesized with Electromagnetic Field",Journal of Alloys and Compounds 509, pp.  ) 5696–5700,  2011.

13- B. Srinivasarao, C. Suryanarayana, K. Oh-ishi, K. Hono, "Microstructure and Mechanical Properties of Al–Zr Nanocomposite Materials", Materials Science and Engineering A 518, pp. 100-107, 2009.

14- Koch, C.C., "The Synthesis and Structure of Nanocrystalline, Material Produced by Mechanical Attrion" Nanostructured Materials, Vol. 2, pp. 109-129, 1993.

15- Fecht, H.J., Helstern, E., Fu, Z., and Johnson, W.L., "Nanocrystalline Metals Prepared by High-Energy Ball Milling", Metallurgical Transaction A, Vol. 21A, pp. 2333-2337, 1990.

16- Bhattacharya, A.K., and Arzt, E., "Plastic Deformation and Its Influence on Diffusion Process During Mechanical Alloying", Scripta Metallurgicaet Materialia Vol. 28, pp. 3895-4000, 1993.

17- C.Suryanarayana, G.H. Chen, and F.H. Froes, Milling Maps for Phase Identification During Mechanical Alloying , Scr. Mater. 26, pp. 1727-1732,1992.

18- C. Suryanarayana, "Mechanical Alloying and Milling", Progress in Materials Science, 46, pp. 1-184, 2001.

19- Z. RazaviHesabi, H.R. Hafizpour and A. Simchi, "An Investigation on the Compressibility of Aluminum/Nano-Alumina Composite Powder Prepared by Blending and Mechanical Milling", Materials Science and Engineering A 454–455,pp. 89-98,2007.

20- M. Rahimian, N. Parvin, and N. Ehsani, “Investigation of Particle Size and Amount of Alumina on Microstructure and Mechanical Properties of Al Matrix Composite Made by Powder Metallurgy”; Mater. Sci. Eng. A 527, pp. 1031–1038, 2010.

21- G. E. Dieter, "Mechanical Metallurgy", Third Edition, Mc Graw-Hill, 1976.

22- ع. عبدالهی و ع. علیزاده، "تولید نانوکامپوزیت دو جزیی فوق مستحکم زمینه آلومینیومی به روش آلیاژسازی مکانیکی و اکستروژن داغ و بررسی خواص مکانیکی آن" ، مجله مواد نوین، جلد 4، شماره 1، ص 83-98، پاییز 1392.

23- A. Alizadeh,and E. Taheri-Nassaj, “Mechanical properties and Wear Behavior of Al–2 wt.% Cu Alloy Composites Reinforced by B₄C Nanoparticles and Fabricated by Mechanical Milling and Hot Extrusion”; Mater. Charact. 67, pp. 119-128, 2011.

24- N. Al-Aqeelia, G. Mendoza-Suareza, C. Suryanarayana, and R.A.L. Drewa, “Development of New Al-Based Nanocomposites by Mechanical Alloying; ” Mater. Sci. Eng. A. 480: Issues 1–2, Pages 392–396, 15 May 2008.

25- Deng, C.F., Wang, D.Z., Zhang, X.X., and Li, A.B.,“Processing and Properties of Carbon Nanotubes Reinforced Aluminum Composites,” Mater. Sci. Eng. A, Vol. 444, pp. 138–145, 2007.

26- Shewmon, P. G., Transformations in Metals, Mc Graw-Hill, New York, 1969