Subject Areas : journal of New Materials
1 - - استادیار گروه مهندسی مواد-دانشکده مهندسی- دانشگاه یاسوج
Keywords:
Abstract :
References:
1- H. Schneider, S. Komarneni (Eds.), Mullite,WILEY-VCH Verlag GmbH & Co. KGaA,
Weinheim, 2005.
2- Z.I. Zaki, E.M.M. Ewais, M.M. Rashad,"Novel route for combustion synthesis of
zirconia mullite/TiB2 composites", Journal ofAlloys and Compounds, Vol. 467, pp. 288-292
2009.
3- L. Shu-quan, ZH. Jie, T. Xiao-ping, T.Yan," Mechanical properties and structure of
zirconia-mullite ceramics prepared by in-situcontrolled crystallization of Si-Al-Zr-Oamorphous bulk", Transaction NonferrousMetallurgy Society of China, Vol. 18, pp.799-
803, 2008.
4- H.M. Jang, S.M. Cho, K.T. Kim, "Aluminamullite-zirconiacomposites", Journal of
Materials Science, Vol. 31, pp.5083-5092,1996.
5- J.S. Moya, M.I. Osendi, "Microstructure andmechanical properties of mullite/ZrO2
composites", Journal of Materials Science,Vol. 19, pp.2909-2914, 1984.
6- K.A. Khor, L.G. Yu, Y. Li, Z.L. Dong, Z.A.Munir, "Spark plasma reaction sintering of
ZrO2-mullite composites from plasmaspheroidized zircon/alumina powders",
Materials Science and Engineering A, Vol.A339,pp.286-/296, 2003.
7- Sh.-ke Zhao, Y. Huang, Ch.-an Wang , Xi.-xian Huang, J.-kun Guo, "Mullite formation
from reaction sintering of ZrSiO4/a-Al2O3mixtures", Materials Letters, Vol. 57, pp.1716–
1722, 2003.
8- Sh.-Ke, Zhao, Y.Huang, Ch.-an Wang, Xi.-xian Huang, J.-Kun Guo, "Sinterability ofZrSiO4/a-Al2O3 mixed powders", CeramicsInternational, Vol. 29, pp.49–53, 2003.
9- E. Medvedovski, "Alumina-mulliteceramics for structural applications",CeramicsInternational, Vol. 32, pp.369-375, 2006.
10- T. Koyama, Sh. hayashi, A. Yasumori,K.Okada, "Preparation and characterization of
mullite-zirconia composite from various starting materials", Journal of Europeanceramic Society, Vol14 (4), pp. 295-302, 1994.
11- S. Lathabai, D.G. Hay, F.Wagner, N.Claussen, "Reaction-bonded mullite/zirconiacomposite", Journal of American CeramicSociety, Vol 79, pp.248–256, 1996.
12- L.B. Garrido , E.F. Aglietti , L. Martorello, M.A. Camerucci, A.L. Cavalieri, "Hardness,
fracture toughness of mullite–zirconiacomposites obtained by slip casting", Materials
Science and Engineering A, Vol. A419,pp.290–296, 2006.
13- H.C. Park, T.Y.Yang, S.Y. Yoon, R.Stevens, "Preparation of zirconia–mullite
composites by an infiltration route", MaterialsScience and Engineering A, Vol. A405, pp.233–238, 2005.
14-M. Popa, J.M. Calderon-Moreno, L.Popescu, M. Kakihana, R. Torecillas,
"Crystallization of gel-derived and quenchedglasses in the ternary oxide Al2O3–ZrO2–SiO2
system", Journal of Non-Crystalline Solids,Vol 297,pp.290–300, 2002.
15- S. Bhattacharjee, S.K. Singh, K.K. Galgali,"Preoaration of zirconia toughned mullite bythermal plasma", Materials Letters, Vol.43 (1-2), pp.77-80, 2000.
16- R.Gopi Chandran, K. C. Patil, G. T.Chandrappa, "Combustion synthesis and
properties of mullite-zirconia composites",Journal of Materials Science, Vol.31, pp.5773-
5779, 1996.
17- L.B. Kong, T.S. Zhang, Y.Z. Chen, J. Ma,F. Boey and H. Huang, "Microstructural
composite mullite derived from oxides via ahigh-energy ball milling process", Ceramics
International Vol.30, pp.1313-1317, 2004.
18- N. Behmanesh, S. Heshmati-Manesh andA. Ataie, "Role of mechanical activation of
precursors in solid state processing of nanostructuredmullite phase", Journal of Alloysand Compounds, Vol. 450, pp.421-425, 2008.
19- T. Ebadzadeh, "Effect of mechanicalactivation, microwave heating on synthesis and
sintering of nano-structured mullite", Journalof Alloys and Compounds, Vol. 489, pp.125-129, 2010.
20- E.R. Rangel and H.B.Ramírez, "Effects ofthe variations in milling time and sintering
temperature on the production of mullite-ZrO2composites", Journal of Ceramic ProcessingResearch. Vol. 5, No. 1, pp. 58-63, 2004.
21- A.W.Weeber, H.Bakker, "Amorphisationby ball milling: a review", Physica B, Vol.153(1-3), pp.93-122, 1988
22- N.Setoudeh, A.Saidi and N.J.Welham,"Carbothermic reduction of anatase and rutile",
Journal of Alloys and Compounds, Vol. 390,pp.138-143, 2005.
23-P.Balaz, "Mechanochemistry inNanoscience, Minerals Engineering",
Springer-Verlag Berlin Heidelberg, 2008
24- C.Suryanarayana, "Mechanical alloyingand milling", Progress in Materials Science,Vol.46, pp.1-184, 2001.
25- HSC Chemistry for Windows, version 5.1,Outokumpu , Oy, 1994.
26- H.M.Jang, S.M. Cho, K.T. Kim, "Aliminamullite-zirconiacomposites, Part1: colloidal
processing and phase-formation charateristics",Journal of Materials Science, Vol.31, pp.5083-5092, 1996.
27-P.N. Kuznetsov, L.I.Kuznetsova, A.M.Zhyzhaev, V.I.Kovalchuk, A.I.Sannikov,
V.V.Boldyrev, "Investigation of mechanicallystimulated solid phase polymorphic transition
of zirconia", Applied catalysis A: General,Vol.298, pp.254-260, 2006.
28-R.C. Garvic, "Crystallization of thetetragonal structure in zirconia microcrystal",
Journal of the Physical Chemistry, Vol. 82 (2),pp.218-224, 1978.
29- T. Ebadzadeh, E.Ghasemi, "Effect of TiO2addition on the stability of t-ZrO2 in mulliteZrO2composites preparedfrom variousstarting materials", Ceramics International,Vol.28, pp.447-450, 2002
30- J.R. Kelly, I.Denry, "Stabilized zirconia asa structural ceramic: An overview", DentalMaterials, Vol. 24, pp.289-298, 2008.