Subject Areas : journal of New Materials
1 - مربی و عضو هیئت علمی دانشگاه صنعتی مالک اشتر،
Keywords:
Abstract :
References:
1- R.B. Mason., M.A. Miller., L.A. Gintert.,and M.F. Singleton., “Corrosion testing and
assessment of metal matrix compositecomponents for military assets”, Tri-service
corrosion conference, pp. 1-14, 2007.
2- F. Toptan., A. Kilicarslan., A. Karaaslan.,M. Cigdem., and I. Kerti., “Processing and
microstructural characterisation of AA 1070and AA 6063 matrix B4Cp reinforced
composites”, Materials and Design, Vol. 31,pp. S87-S91, 2010.
3- M. Khakbiz., and F. Akhlaghi., “Synthesisand structural characterization of Al–B4C
nano-composite powders by mechanicalalloying”, Journal of Alloys and Compounds,
Vol. 479, pp. 334–341, 2009.
4- A. Bhatnagar., “Lightweight ballisticcomposites: Military and law-enforcement
applications”,Wood head Publishing in Materials, 2006.
5- A. J. Pyzik., P. D. Williams., and A.McCombs., “New low temperature processing
for boron carbide/aluminum based compositearmor”, Report 1990, ARO-26166.1-MS-A,
1991.
6- J. Abenojar., F. Velasco., and M. A.Martinez., “Optimization of processing
parameters for the Al + 10 درصد B4C systemobtained by mechanical alloying”, Journal of
Materials Processing Technology, Vol. 184,pp. 441–446, 2007.
7- X.G. Chen., “Application of Al-B4C MetalMatrix Composites in the Nuclear Industry for
Neutron Absorber Materials”, Symposium ofSolidification Process of Metal Matrix
Composites, Edited by N. Gupta and W. H.Hunt, TMS, pp. 343-350, 2006.
8- X.G. Chen., and R. Hark., “Development ofAl-30 درصدB4C Metal Matrix Composites for
Neutron Absorber Material”, Symposium ofAluminum Alloys: Fabrication,
Charaterization and applications Edited by W.Yin et al, TMS, pp. 3-9, 2008.
9- K. M. Shorowordi, A. S. M. A. Haseeb, andJ. P. Celis, “Tribo-surface characteristics of
Al–B4C and Al–SiC composites worn under different contact pressures”, Wear, Vol. 261,
pp. 634–641, 2006.
10- I. Kerti and F. Toptan, “Microstructuralvariations in cast B4C-reinforced aluminium
matrix composites (AMCs)”, Materials Letters,Vol. 62, pp. 1215–1218, 2008.
11- K. Kitazono, E. Sato, K. Kuribayashi,Novel manufacturing process of closed-cell
aluminum foam by accumulative roll-bonding,Scripta Mater 50 (2004) 495-498.
12- H. Sekine and R Chen. “A combinedmicrostructure strengthening analysis of
SiCp/Al metal matrix composites”,Composites, Vol. 26, pp. 183-8, 1995.
13- H. A. Mohamed and J. Washburn,“Mechanism of Solid State Pressure Welding”,
Welding Journal, Vol. 30, pp. 2–10, 1975.
14- N. Bay, “Cold Welding: Part ІІ, ProcessVariant and application”, Metal Construction,
pp. 486-490, 1986.
15- N. Bay, “Cold Welding: Part І,Characteristic, Bonding Mechanism, Bond
Strength”, Metal Construction, pp. 369-372,1986.
16- C. Lu, K. Tieu and D. Wexler, “Significantenhancement of bond strength in the
accumulative roll bonding process using nanosizedSiO2 particles”, Journal of Material
Processing and Technology, Vol. 209, pp.
4830–4834, 2009.
17- M. Alizadeh and M.H. Paydar, “Study onthe effect of presence of TiH2 particles on the
roll bonding behavior of aluminum alloystrips”, Material Design, Vol. 30, pp. 82–86,
2009.
18- Y. Saito, N. Tsuji, H. Utsunomiya, T.Sakai, and R. G. Hong, “Ultra-fine grained
bulk aluminum produced by accumulative rollbonding(ARB) process”, Scripta Materialia,
Vol. 39, pp. 1221–1227, 1998.
19- N. Tsuji., T. Iwata., M. Sato., S. Fujimoto.,and Y Minamino., “Aging behavior of
ultrafine grained Al-2 wt %Cu alloy severelydeformed by accumulative roll bonding”,
Science and Technology of AdvancedMaterials, Vol. 5, pp. 173–180, 2004.
20- H. Utsunomiya., K. Tanda., Y. Saito., T.Sakai., and N. Tsuji., “Effects of Lubrication
on Accumulative Roll-Bonding (ARB) ofAluminum”, Journal of the Japan Society for
Technology of Plasticity, Vol. 40, pp. 1187–1191, 1999.
21- S. H. Lee., Y. Saito., N. Tsuji., H.Utsunomiya., and T. Sakai., “Role of shear
strain in ultragrain refinement by accumulativeroll-bonding (ARB) process”, Scripta
Materialia, Vol. 46, pp. 281–285, 2002.
22- T. Ungar., G. Tichy., J. Gubicza., and R.Hellmig., “Correlation between subgrains and
coherently scattering domains”, PowderDiffraction, Vol. 20, pp. 366–75, 2005.
23- L. R. Vaidyanath., M. G. Nicholas., and D.R. Milner., “Pressure welding by rolling”,
British Weld Journal, Vol. 6, 13–28, 1959.
24- H. A. Mohamed., and J. Washburn.,“Mechanism of solid state pressure welding”,
Weld Journal, Vol. 30, pp. 302–310, 1975.
25- Z. Wang., T. K. Chen., and D. J. Lloyd.,“Stress distribution in particulate-reinforced
metal-matrix composites subjected to externalload”, Metallurgical Transactions A, Vol. 24,
pp. 197–207, 1993.
26- D. J. Lloyd., “Aspects of fracture inparticulate reinforced metal matrix
composites”, Acta Metallurgica et Materialia,Vol. 42, pp. 59–71, 1991.
27- Z. Wang., and R. J. Zhang., “Mechanicalbehavior of cast particulate SiC/Al (A356)
metal matrix composites” MetallurgicalTransactions A, Vol. 22, 1585–1593, 1991.
28- P. B. Prangnell., S. J. Barnes., S. M.Roberts., and P. J. Withers., “The effect of
particle distribution on damage formation inparticulate reinforced metal matrix composites
deformed in compression”, Materials Scienceand Engineering A, Vol. 220, pp. 41–56, 1996.
29- T. Christman., A. Needleman., and S.Suresh., “An experimental and numerical study
of deformation in metal-ceramic composites”,Acta Metallurgica et Materialia, Vol. 37, pp.
3029–3050, 1989.
30- S. Tao., N. Townely., and J. D. Boyd.,“Effects of particulate spacing distribution on
internal stress and damage in MMCs”,Microstructure Sciences, Vol. 22, pp. 249–259,
1994.
31- T. V. Clyne., and P. J. Withers., “Anintroduction to metal matrix composites”
Cambridge University Press, Cambridge,United Kingdom, 1993.
32- M. J. Tan., and X. Zhang., “Powder metalmatrix composites: selection and processing”
Materials Science and Engineering A, Vol.244, pp. 80–85, 1998.
33- I. Sabirov., O. Kolednik., and R. Pippan.,“Homogenization of metal matrix composites
by high-pressure torsion”, Metallurgical andMaterials Transactions A, Vol. 36, pp. 2861–
2870, 2005.
34- I. Sabirov., O. Kolednik., R. Z. Valiev.,and R. Pippan., “Equal channel angular
pressing of metal matrix composites: Effect onparticle distribution and fracture toughness”
Acta Materialia, Vol. 53, pp. 4919–30, 2005.