A

  • Abbasi Larki.Omid Effect Of Quenching and Tempering Temperature on the Fracture Quality of GS-45CrNiMo4-2 Steel, Through the Quench-Temper Heat Treatment Cycle [ Vol.9, Issue 2 - Winter Year 1397]
  • Abbasi.Marzieh Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [ Vol.8, Issue 4 - Summer Year 1397]
  • Abbasi.Mehrdad Introduction to Backscattered Electron Diffraction (EBSD) [ Vol.4, Issue 1 - Spring Year 1392]
  • Abbasi.Mehrdad The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting [ Vol.7, Issue 3 - Spring Year 1396]
  • Abbasi.Mehrdad Production of composite coating of hard chrome – nano alumina by electroplating from the bath of hexa valence chrome and the study of the hardness and abrasive properties [ Vol.8, Issue 2 - Winter Year 1396]
  • Abbasi.Mehrdad The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method [ Vol.14, Issue 2 - Summer Year 1402]
  • Abbasi.milad A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [ Vol.14, Issue 3 - Autumn Year 1402]
  • Abbaszadeh.mostafa Investigating the simultaneous role of clay nanoparticles and strain rate on the tensile behavior of polyethylene matrix nanocomposite [ Vol.13, Issue 4 - Winter Year 1401]
  • Abdi.Farhad Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel [ Vol.11, Issue 2 - Summer Year 1399]
  • abdoli.farzaneh The Comparative Study of ADI Machinability with 42CrMo4 Steel in Turning Process [ Vol.4, Issue 5 - Spring Year 1393]
  • Abdollahi.Mehdi Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [ Vol.10, Issue 3 - Autumn Year 1398]
  • Abdollah-pour.Hassan Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [ Vol.10, Issue 3 - Autumn Year 1398]
  • Abdollahpour.Sattar [ Vol.5, Issue 4 - Summer Year 1394]
  • Abdolmaleki.Bahram Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method [ Vol.13, Issue 2 - Summer Year 1401]
  • AbediKooshki.Sara [ Vol.1, Issue 2 - Winter Year 1389]
  • abiri.Habib alh [ Vol.5, Issue 4 - Summer Year 1394]
  • abolghasemi.shahnam [ Vol.4, Issue 2 - Summer Year 1392]
  • abolhasani.maryam The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC [ Vol.8, Issue 3 - Spring Year 1397]
  • Aboutalebi.Gholam Reza Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [ Vol.11, Issue 4 - Winter Year 1399]
  • aboutalebi.mohammad reza Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [ Vol.14, Issue 1 - Spring Year 1402]
  • Aboutalebi.Mohammad Reza Evaluation of microsegregation during dendritic solidification of a binary alloy using phase field method and analytical models [ Vol.1, Issue 1 - Autumn Year 1389]
  • Adeli.Mandana The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [ Vol.11, Issue 3 - Autumn Year 1399]
  • Adeli.Mandana Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [ Vol.14, Issue 1 - Spring Year 1402]
  • Adeli.Mandana Effect of TiC and TiB2 Reinforcement Phase Addition on Mechanical and Tribological Properties of NiAl-TiC-TiB2 Composite Produced Through Combustion Synthesis Process [ Vol.12, Issue 2 - Summer Year 1400]
  • adibnazari.saeed Investigation of the effect of orthotropic parameters in failure of orthotropic materials under the rolling contact [ Vol.10, Issue 3 - Autumn Year 1398]
  • Afifi Tasuji.Zahra [ Vol.5, Issue 3 - Spring Year 1394]
  • Afkhami Karaei.Mohammad Laboratory investigation of using a ternary polymer of itaconic acid-sodium polystyrene sulfonate-acrylamide as an inhibitor for calcium carbonate scaling in formation water [ Vol.14, Issue 1 - Spring Year 1402]
  • Afkhami.Soheil Investigating the Effect of Intercritical Annealing Heat Treatment on the Quenching and Partitioning of Ferrite-Bainite-Martensite Microphases in High-Silicon Low-Alloy DIN 1.5025 Steel [ Vol.14, Issue 2 - Summer Year 1402]
  • Afsari.Ahmad [ Vol.2, Issue 1 - Spring Year 1390]
  • Afsari.Ahmad [ Vol.3, Issue 4 - Winter Year 1391]
  • Afsari.Ahmad 1 [ Vol.1, Issue 1 - Autumn Year 1389]
  • Afshar badr.Zeynab [ Vol.4, Issue 2 - Summer Year 1392]
  • Afsharnaderi.Aria Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [ Vol.8, Issue 4 - Summer Year 1397]
  • Afzali.niloufar ساخت و مشخصه یابی فوتوالکترود تیتانیوم دی اکسید مزو متخلخل قالب گیری شده ی اتصال یافته با بیسموت وانادات [ Vol.12, Issue 4 - Winter Year 1400]
  • Ahmadi.Alireza Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [ Vol.8, Issue 4 - Summer Year 1397]
  • Ahmadi.Hamidreza Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method [ Vol.13, Issue 2 - Summer Year 1401]
  • Ahmadi.kameel [ Vol.2, Issue 3 - Autumn Year 1390]
  • Ahmadi.Nilufar Masumeh [ Vol.2, Issue 4 - Winter Year 1390]
  • Ahmadi.Reza Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [ Vol.8, Issue 4 - Summer Year 1397]
  • Ahmadimoghadam.Hajar Investigating the behavior of compressive strength and abrasion resistance of the floor tile at different sintering temperatures [ Vol.10, Issue 3 - Autumn Year 1398]
  • Ahmadimoghadam.Hajar Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [ Vol.10, Issue 2 - Summer Year 1398]
  • Ajdari.Sasan Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [ Vol.8, Issue 4 - Summer Year 1397]
  • akbari musavi.ali asghar [ Vol.5, Issue 4 - Summer Year 1394]
  • akbarzadeh.niloufar [ Vol.5, Issue 3 - Spring Year 1394]
  • Akbarzadeh.Niloufar Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [ Vol.8, Issue 2 - Winter Year 1396]
  • Al Fadhli.Hind Khalaf Shayea Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying [ Vol.14, Issue 2 - Summer Year 1402]
  • Alavi Zaree.Seyed Reza Tensile behavior of AZ91 alloy containing silver and under different casting conditions [ Vol.13, Issue 4 - Winter Year 1401]
  • Alavi Zaree.Seyed Reza improvement of mechanical properties and hot cracking susceptibility of 304 stainless steel weld joints with the simultaneous electromagnetic vibration application [ Vol.9, Issue 1 - Autumn Year 1397]
  • Alavi.Khadije Microstructure Evaluation of Al Nanocomposite Foam Reinforced with SiO2 Nanoparticles Produced using Ultrasonic Technique [ Vol.4, Issue 6 - Summer Year 1393]
  • albooghobysh.mohammadreza Design and fabrication of electrochemical biosensor based on β-CD-Graphene nanocomposite for specific adsorption of curcumin, chlorpromazine and clomipramine [ Vol.7, Issue 4 - Summer Year 1396]
  • Ali Askari Zamanic.Mohammad Synthesis of strontium titanate from celestite concentrate [ Vol.10, Issue 3 - Autumn Year 1398]
  • Ali Panahiyan.Rasoul Investigating the effect of banding on the impact resistance behavior of microalloy steel used in pipelines [ Vol.3, Issue 4 - Winter Year 1391]
  • Alimirzaloo.Vali Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method [ Vol.6, Issue 3 - Summer Year 1395]
  • Alizadeh.Morteza [ Vol.5, Issue 2 - Winter Year 1393]
  • Alizadeh.Morteza Production of Aluminum metal matrix composite reinforced with Al-Cr-Fe quasicrystal nano-powder by using accumulative roll bonding process and investigation mechanical properties [ Vol.12, Issue 2 - Summer Year 1400]
  • Alizadeh.Morteza The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [ Vol.6, Issue 1 - Autumn Year 1394]
  • Alizadeh.Morteza Investigation of Structural and Corrosion properties of MoS2- WC Reinforced Al/18Cu Layered Composite in Marine Environment [ Vol.14, Issue 4 - Winter Year 1402]
  • Alizadeh.Morteza [ Vol.2, Issue 2 - Summer Year 1390]
  • Alizadeh.Morteza [ Vol.2, Issue 1 - Spring Year 1390]
  • Alizadeh.Mostafa Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [ Vol.8, Issue 4 - Summer Year 1397]
  • Alizadeh.Mostafa Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study) [ Vol.8, Issue 3 - Spring Year 1397]
  • Aljassar.Zahraa Salah Hadi Evaluation of tribological behavior of PEO composite coating containing SiO2 particles on 7075 aluminum alloy [ Vol.13, Issue 3 - Autumn Year 1401]
  • Allameh.Zahra Fabrication of Crystalline Ni-B-Al2O3 Composite Coating by Electroless Method and its Tribological Characterizations [ Vol.4, Issue 6 - Summer Year 1393]
  • amani.ali mohammad A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [ Vol.14, Issue 3 - Autumn Year 1402]
  • amin.parinaz [ Vol.5, Issue 2 - Winter Year 1393]
  • Amini Najafabadi.Reza Investigation of microstructure and mechanical properties of welding metal of A516-Gr70 steel in the presence of TiO2 by SAW method [ Vol.12, Issue 3 - Autumn Year 1400]
  • Amini.K. The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel [ Vol.7, Issue 2 - Winter Year 1395]
  • amini.kamran Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [ Vol.7, Issue 4 - Summer Year 1396]
  • Amini.Kamran Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [ Vol.6, Issue 2 - Winter Year 1394]
  • amini.milad The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process [ Vol.8, Issue 3 - Spring Year 1397]
  • Amini.Roghayeh Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [ Vol.10, Issue 3 - Autumn Year 1398]
  • Amini.Saeid The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process [ Vol.8, Issue 4 - Summer Year 1397]
  • aminolroayaee.maryam [ Vol.3, Issue 4 - Winter Year 1391]
  • aminolroayaee.maryam Large Eenhancement in Mechanical Properties of Al 2024 Alloy After Single Rolling Pass [ Vol.4, Issue 5 - Spring Year 1393]
  • Amir Abadizadeh.Seyed Reza Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [ Vol.11, Issue 1 - Spring Year 1399]
  • Amiri.Gholam Reza Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [ Vol.11, Issue 4 - Winter Year 1399]
  • Amoozegar.Abolfazr Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [ Vol.6, Issue 2 - Winter Year 1394]
  • Amuri.Elham [ Vol.4, Issue 2 - Summer Year 1392]
  • Anjabin.Nozar Numerical modeling of dissolution process of spherical precipitates in alloys by differential quadrature method (DQM) [ Vol.12, Issue 1 - Spring Year 1400]
  • Anvari.Sayedeh Zahra The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [ Vol.8, Issue 2 - Winter Year 1396]
  • Arabahmadi.Raziyeh Synthesis and characterization of copper based spinel coating on alumina substrate for spark plug aero-engine application [ Vol.12, Issue 3 - Autumn Year 1400]
  • Arsalandeh.Fereshteh [ Vol.5, Issue 2 - Winter Year 1393]
  • arshadi.sarah Thermodynamic Analysis of Pressureless Sintering of B4C-Si Nano Composite by Factsage Software [ Vol.4, Issue 5 - Spring Year 1393]
  • Asadi.Abbas Investigation of microstructure and mechanical properties of welding metal of A516-Gr70 steel in the presence of TiO2 by SAW method [ Vol.12, Issue 3 - Autumn Year 1400]
  • Asadi.Javad Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system during the Transient Liquid Phase (TLP) [ Vol.11, Issue 1 - Spring Year 1399]
  • Asadi.Mehran [ Vol.4, Issue 2 - Summer Year 1392]
  • asgari.reza [ Vol.5, Issue 3 - Spring Year 1394]
  • Asgari.Zahra [ Vol.3, Issue 2 - Summer Year 1391]
  • asghari yengjeh.vahid Microstructural Grading of Al-11 wt.%Mg2Si Hypoeutectic Alloy by Centrifugal Casting [ Vol.1, Issue 1 - Autumn Year 1389]
  • asghariebrahimAbad.mohamadjavad [ Vol.3, Issue 2 - Summer Year 1391]
  • Ashja mahdavi.Shahrokh The effect of severe plastic deformation on the natural ageing behavior of aluminum alloy 2024 [ Vol.6, Issue 4 - Spring Year 1395]
  • Askaran.Mohammad Reza Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [ Vol.9, Issue 1 - Autumn Year 1397]
  • askari.masood Effect of Chlorine in Perovskite Layers Morphology and Efficiency of Perovskite Solar Cells in One step & Spin-Dip Deposition Methods [ Vol.9, Issue 2 - Winter Year 1397]
  • Askarzadeh.Neda An Investigation on the Effect of Barium Titanate Nanoparticles on the Properties of Electrospun PVDF Fibers [ Vol.13, Issue 1 - Spring Year 1401]
  • asoudeh.eshagh analysis of plastic instability during sandwich sheet rolling [ Vol.1, Issue 1 - Autumn Year 1389]
  • Avak.karim Introduction: Titanium alloys containing the β phase have much better corrosion resistance. Some alloying elements, such as Mo, stabilize this phase. Among the Ti alloys that contain this element, the Ti-10Mo alloy is of particular importance. If this alloy is produced using selective laser melting (SLM), it will be an approach that is user-friendly due to the nature of the process. Methods: Samples were printed by SLM process. The constituent phases were determined by XRD. The microstructure was evaluated using optical and scanning electron microscopes. Corrosion behavior was evaluated by cyclic potentiodynamic polarization and electrochemical impedance spectroscopy. Findings: In the XRD pattern of pure Ti powder and printed sample, α and α/α' phases are seen, respectively. However, Ti-10Mo powder mixture consists of α and Mo phases, the β phase is more dominant in printed sample because of the Mo penetration in the Ti matrix. As well as, in the microstructure of Ti10Mo the beta phase is seen as Mo-rich streaks, whereas in pure Ti it is found relatively negligible as epitaxially grown primary columnar β grains with acicular α' martensite phase. Mo addition to pure Ti reduces its passive current density and stabilize oxide film. However, Ti-10Mo alloy, with its various phases and galvanic couples, experiences rupture of the passive oxide film at higher potentials, leading to pitting corrosion. The impedance module value of Ti-10Mo is higher than that of pure Ti. Both samples have a double passive oxide film, with Ti-10Mo alloy exhibiting higher resistance than pure Ti. [ Vol.15, Issue 1 - Spring Year 1403]
  • Avak.karim Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting [ Vol.14, Issue 3 - Autumn Year 1402]
  • Azadeh.Maryam Synthesis and Characterization of Activated Carbon from Rice husk [ Vol.11, Issue 2 - Summer Year 1399]
  • azami.erfan Applying Titania and Hydroxyapatite coating on Ti-6Al-4V by PEO and hydrothermal processes and investigating its corrosion behavior in simulated body environment [ Vol.1, Issue 1 - Autumn Year 1389]
  • Azarafza.Reza Investigation of Morphology and production efficiency of Produced Nano-Fibers with multi-nozzle electrospinning process [ Vol.9, Issue 1 - Autumn Year 1397]
  • Azarafza.Reza Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91 [ Vol.8, Issue 3 - Spring Year 1397]
  • Azarmi.mohammad hoseyn Experimental and finite element analysis of hot backward extrusion process of vanadium microalloyed steel preform for determining optimum preheat temperature [ Vol.10, Issue 2 - Summer Year 1398]
  • Azimifar.Farhad Evaluation of tribological behavior of PEO composite coating containing SiO2 particles on 7075 aluminum alloy [ Vol.13, Issue 3 - Autumn Year 1401]
  • Azimifar.Farhad Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying [ Vol.14, Issue 2 - Summer Year 1402]
  • Azizeh.M. [ Vol.5, Issue 2 - Winter Year 1393]
  • Azizeh.M. [ Vol.2, Issue 4 - Winter Year 1390]
  • Azizeh.M. Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing [ Vol.6, Issue 2 - Winter Year 1394]
  • Azizi.Bita 1 [ Vol.1, Issue 1 - Autumn Year 1389]
  • Azizi.Bita [ Vol.3, Issue 4 - Winter Year 1391]
  • Azizi.Mehdi Investigation of Thermophysical Properties and Thermal Performance and Pressure Drop of of Nanofluid including Functionalized Graphene with Polyvinyl Alcohol [ Vol.12, Issue 4 - Winter Year 1400]

B

  • Babaei holary.Nafiseh [ Vol.1, Issue 2 - Winter Year 1389]
  • Babaei.Abbas Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide [ Vol.12, Issue 2 - Summer Year 1400]
  • Babaei.Abbas Preparation and comparison of natural and synthetic hydroxyapatite scaffolds made by cold isostatic pressing method [ Vol.9, Issue 1 - Autumn Year 1397]
  • Babaei.Abbas Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [ Vol.11, Issue 3 - Autumn Year 1399]
  • Babaei.Azin Application of Graphene Oxide Quantum Dots in Planar Perovskite Solar Cell [ Vol.12, Issue 2 - Summer Year 1400]
  • Babakhani.Abolfazl Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [ Vol.6, Issue 2 - Winter Year 1394]
  • Babakhani.Abolfazl Microstructure Evaluation of Al Nanocomposite Foam Reinforced with SiO2 Nanoparticles Produced using Ultrasonic Technique [ Vol.4, Issue 6 - Summer Year 1393]
  • Babakhani.Abolfazl Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling [ Vol.3, Issue 4 - Winter Year 1391]
  • Babakhani.Abolfazl Investigation of Mechanical Properties of Al-Al2O3 Composites Synthesized By Spark Plasma Sintering [ Vol.7, Issue 2 - Winter Year 1395]
  • Babakhani.Abolfazl An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [ Vol.7, Issue 3 - Spring Year 1396]
  • Babakhani.Abolfazl Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [ Vol.7, Issue 2 - Winter Year 1395]
  • badarloo.mahdi Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [ Vol.7, Issue 1 - Autumn Year 1395]
  • Badloo.Mojtaba [ Vol.4, Issue 1 - Spring Year 1392]
  • Badloo.Mojtaba [ Vol.2, Issue 2 - Summer Year 1390]
  • Badloo.Mojtaba [ Vol.3, Issue 4 - Winter Year 1391]
  • Badloo.Mojtaba Investigating the effect of banding on the impact resistance behavior of microalloy steel used in pipelines [ Vol.3, Issue 4 - Winter Year 1391]
  • Badloo.Mojtaba [ Vol.2, Issue 1 - Spring Year 1390]
  • Badloo.Mojtaba [ Vol.3, Issue 1 - Spring Year 1391]
  • bagheri.nad ali Study of Amitriptyline drug adsorption on multi walled carbon nanotube (MWCNT) [ Vol.12, Issue 1 - Spring Year 1400]
  • bagheri.nad ali Efficient Removal of Omeprazole from Water Samples by Utilizing of Carbon Nanotubes as Powerful nanoadsorbent and Comprising with Graphite: Kinetic and Thermodynamic studies [ Vol.12, Issue 4 - Winter Year 1400]
  • Baghshahi.Saeed Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [ Vol.10, Issue 1 - Spring Year 1398]
  • Baghshahi.Saeid Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [ Vol.7, Issue 1 - Autumn Year 1395]
  • bahadori yekta.ehsan Effect of milling time and investigation of thermodynamic analysis on amorphous phase formation in Fe-C-Ta alloy prepared by mechanical alloying [ Vol.8, Issue 3 - Spring Year 1397]
  • bahadori yekta.ehsan Effect of PCA addition on microstructural and magnetic Properties a new Fe-based amorphous alloy prepared by Mechanical Alloying [ Vol.9, Issue 2 - Winter Year 1397]
  • Baharshanjani.Samin Fabrication of solid oxide fuel cell (SOFC) anodes by electrophoretic deposition of NiO-YSZ composite powder [ Vol.1, Issue 1 - Autumn Year 1389]
  • Bahram.بهرام [ Vol.1, Issue 2 - Winter Year 1389]
  • Bahrami.vahid Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [ Vol.6, Issue 1 - Autumn Year 1394]
  • Bahrami-fard.Bahar A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [ Vol.11, Issue 2 - Summer Year 1399]
  • Bahrevar.Mohammad Ali Investigating the effects of 2.5 mol% Ce doping on electrostriction behavior of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics [ Vol.10, Issue 1 - Spring Year 1398]
  • Bahrololoom.Mohammad Ebrahim [ Vol.2, Issue 4 - Winter Year 1390]
  • Bahrololoom.Mohammad Ebrahim A detailed DOE study on temperature, concentration and their interactions on corrosion protection of carbon steel [ Vol.12, Issue 3 - Autumn Year 1400]
  • Bahrololoom.Mohammad Ebrahim The formation process of nanocrystalline permalloy by electroplating and optimization the surface conditions for alloy coatings [ Vol.6, Issue 4 - Spring Year 1395]
  • Bahrynian.sharareh The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [ Vol.6, Issue 3 - Summer Year 1395]
  • Bakhtiari.Hamid [ Vol.5, Issue 4 - Summer Year 1394]
  • bakhtiari.hassan Investigation on the effect of frequency and duty cycle on nano-crystalline TiO2 coatings produced by plasma electrolytic oxidation [ Vol.9, Issue 1 - Autumn Year 1397]
  • Baktash.Esmat An Experimental and Simulational Investigation on Schiff-base Complex of Cobalt and Corresponding Ligand as Corrosion Inhibitor in Acidic Solution [ Vol.5, Issue 1 - Autumn Year 1393]
  • Balichalandar.Nima Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [ Vol.11, Issue 4 - Winter Year 1399]
  • BALIN.Abit Investigation onthe effect of both Content and Type of Carbon on Low Temperature Synthesis of SiC by Using Magnesiothermal Reduction Process [ Vol.5, Issue 1 - Autumn Year 1393]
  • bameri.khirallah [ Vol.3, Issue 3 - Autumn Year 1391]
  • baratali.maryam Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [ Vol.7, Issue 4 - Summer Year 1396]
  • Barati.Maryam Implementation of integrity Management System for Gas Transmission Pipelines in South Zagros Region Based on ASME B31.8s [ Vol.13, Issue 3 - Autumn Year 1401]
  • Barvarz.Zahra [ Vol.4, Issue 1 - Spring Year 1392]
  • bavarsiha.fatemeh Fabrication of Fe3O4/SiO2/ZnO photocatalytic composite with core/shell/shell Nanostructure and characterized its [ Vol.8, Issue 4 - Summer Year 1397]
  • bavarsiha.fatemeh Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [ Vol.8, Issue 3 - Spring Year 1397]
  • Bayat.Mohammad Experimental and finite element analysis of hot backward extrusion process of vanadium microalloyed steel preform for determining optimum preheat temperature [ Vol.10, Issue 2 - Summer Year 1398]
  • Bazargan Lari.Reza Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [ Vol.10, Issue 1 - Spring Year 1398]
  • Bazargan Lari.Reza Studying the Adsorption Behavior of Copper (II) Ions from Industrial Waste Water Solutions Using Corncob Particles [ Vol.4, Issue 3 - Autumn Year 1392]
  • Behrad Vakylabad.Ali Study on the capacity of medicinal intake and release of the polymeric polyurethane and biological parts of pomegranate fruit nanocomposite [ Vol.13, Issue 1 - Spring Year 1401]
  • Behroozi.Danial Investigation of the Synergistic Effect of Soft and Hard Particles on Corrosion and Wear Resistance Behavior of Ni-B-PTFE-Si3N4 Electroless Coating on Carbon Steel [ Vol.12, Issue 1 - Spring Year 1400]
  • Behtari poor.Esmat Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [ Vol.8, Issue 2 - Winter Year 1396]
  • Behzadineghad.Arash Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles [ Vol.12, Issue 3 - Autumn Year 1400]
  • belbasi.majid Experimental and finite element analysis of hot backward extrusion process of vanadium microalloyed steel preform for determining optimum preheat temperature [ Vol.10, Issue 2 - Summer Year 1398]
  • belbasi.majid Effect of cold rolling process on recovery strain and recovery ratio of Ni50Ti40Hf10 shape memory alloy [ Vol.10, Issue 1 - Spring Year 1398]
  • belbasi.majid Investigation of corrosion resistance of Ti-6Al-4V alloy welding zone Welded by TIG method [ Vol.12, Issue 2 - Summer Year 1400]
  • Berenji Tehrahi.Nikoo Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [ Vol.10, Issue 1 - Spring Year 1398]
  • bidi.sommayeh [ Vol.2, Issue 2 - Summer Year 1390]
  • bolouk heidari.reza THE EFFECT OF MICROSTRUCTURAL CHANGES ON THE CORROSION PROPERTIES OF 310S AUSTENITIC STAINLESS STEEL AFTER THERMOMECHANICAL TREATMENT [ Vol.13, Issue 1 - Spring Year 1401]
  • Bonyadi.Mohammad Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process [ Vol.14, Issue 2 - Summer Year 1402]
  • borhani.ehsan [ Vol.5, Issue 4 - Summer Year 1394]
  • borji.saeed The Effect of Adding Nanodiamond Particles and Heat Treatment on Hardness and Wear Resistance of Ni-P-Nanodiamond Electroless Nanocomposite Coatings [ Vol.7, Issue 2 - Winter Year 1395]

C

D

  • dadashian.saeideh Fabrication of Fe3O4/SiO2/ZnO photocatalytic composite with core/shell/shell Nanostructure and characterized its [ Vol.8, Issue 4 - Summer Year 1397]
  • dadashian.saeideh Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [ Vol.8, Issue 3 - Spring Year 1397]
  • dadashian.saeideh Synthesis of Fe3O4/SiO2/TiO2-Ag Core Shell Nanocomposites and Investigation of its Magnetic Properties [ Vol.8, Issue 3 - Spring Year 1397]
  • Dadashpoor.HAmed Experimental study of forming Parts with central blister by Incremental forming process with positive-negative forming pattern [ Vol.10, Issue 4 - Winter Year 1398]
  • Dadfar.Soheil Removal Color From Aqueous Solution By Penta Aza Tetra Ethylene Supported On Polyacrylamide As a New Adsorbent Kinetic And Adsorption Isotherm Studies [ Vol.8, Issue 1 - Autumn Year 1396]
  • Dadfar.Soheil [ Vol.5, Issue 2 - Winter Year 1393]
  • Dadfar.Soheil [ Vol.5, Issue 4 - Summer Year 1394]
  • Dadfar.Soheil [ Vol.4, Issue 1 - Spring Year 1392]
  • Dadfar.Soheil The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [ Vol.6, Issue 1 - Autumn Year 1394]
  • Dadfar.Soheil Batch adsorption and removal of Methylene Blue (MB) from wastewater using Tassel as a cheap bioadsorbent [ Vol.4, Issue 6 - Summer Year 1393]
  • Dadfar.Soheil Batch adsorption and removal of Methylene Blue (MB) from wastewater using Tassel as a cheap bioadsorbent [ Vol.4, Issue 6 - Summer Year 1393]
  • Dadfar.Soheil Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [ Vol.10, Issue 4 - Winter Year 1398]
  • Dallali Isfahani.Taghi Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [ Vol.6, Issue 3 - Summer Year 1395]
  • Dallali Isfahani.Taghi Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [ Vol.10, Issue 1 - Spring Year 1398]
  • Danesh.Fereshteh [ Vol.2, Issue 1 - Spring Year 1390]
  • Danesh.Fereshteh [ Vol.2, Issue 2 - Summer Year 1390]
  • danesh.hossein Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [ Vol.6, Issue 2 - Winter Year 1394]
  • Daneshmand.Saeed Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [ Vol.11, Issue 4 - Winter Year 1399]
  • Daneshmanesh.Habib The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel [ Vol.8, Issue 1 - Autumn Year 1396]
  • Daneshmanesh.Habib preparation and evaluation of mechanical and thermal properties of epoxy/silica nanocomposites [ Vol.8, Issue 3 - Spring Year 1397]
  • Dashti.Zahra Investigation of creep behavior of ME21 and MX21 magnesium alloys [ Vol.9, Issue 2 - Winter Year 1397]
  • davaei.دوایی [ Vol.4, Issue 1 - Spring Year 1392]
  • DavidCon.DavidCon Synthesis of Zirconium Diboride Via Carbothermal, Borothermal, and Borocarbothermal Activation Methods [ Vol.6, Issue 2 - Winter Year 1394]
  • DavidUnink.DavidUnink Effect of pH on Production Process and Characteristics of Zirconium Carbide Nano Particles Synthesized by Sol-Gel Method [ Vol.7, Issue 1 - Autumn Year 1395]
  • DEHBOZORGI.mohamamad Investigating the effect of using colors containing copper oxide and zinc oxide (zinc-rich) on microbial corrosion behavior of sewage pipes [ Vol.10, Issue 1 - Spring Year 1398]
  • dehghani.diana [ Vol.5, Issue 4 - Summer Year 1394]
  • Dehghanian.Changiz Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application [ Vol.10, Issue 1 - Spring Year 1398]
  • Dehghanian.Changiz Effect of sodium carbonate additive on corrosion behavior of nitrocarburized coating by cathodic plasma electrolytic [ Vol.9, Issue 1 - Autumn Year 1397]
  • Dehmolaei.Reza Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process [ Vol.5, Issue 1 - Autumn Year 1393]
  • Dehmolaei.Reza improvement of mechanical properties and hot cracking susceptibility of 304 stainless steel weld joints with the simultaneous electromagnetic vibration application [ Vol.9, Issue 1 - Autumn Year 1397]
  • dehnavi.mehdi Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [ Vol.6, Issue 4 - Spring Year 1395]
  • delroba.mina [ Vol.1, Issue 2 - Winter Year 1389]
  • Dianati.Mohammad Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [ Vol.6, Issue 1 - Autumn Year 1394]
  • dolatkhah.farzad Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [ Vol.7, Issue 3 - Spring Year 1396]
  • Doniavi.Ali Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [ Vol.11, Issue 4 - Winter Year 1399]
  • Doosti.Alireza [ Vol.5, Issue 3 - Spring Year 1394]
  • dssfg.gg [ Vol.5, Issue 2 - Winter Year 1393]
  • dssfg.gg [ Vol.2, Issue 1 - Spring Year 1390]
  • dssfg.gg [ Vol.2, Issue 2 - Summer Year 1390]
  • dssfg.gg The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [ Vol.6, Issue 1 - Autumn Year 1394]

E

  • Ebadzadeh.Tooraj Investigating the effects of 2.5 mol% Ce doping on electrostriction behavior of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics [ Vol.10, Issue 1 - Spring Year 1398]
  • Ebrahimi asl.Sarieh Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [ Vol.8, Issue 1 - Autumn Year 1396]
  • ebrahimi.Golamreza Experimental Study on Creep Behavior of Al2024/SiC Composite Produced via Accumulative Roll Bonding (ARB) Process [ Vol.8, Issue 3 - Spring Year 1397]
  • ebrahimi.H. Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [ Vol.11, Issue 4 - Winter Year 1399]
  • Ebrahimi.Reza [ Vol.5, Issue 4 - Summer Year 1394]
  • Ebrahimi.Reza [ Vol.3, Issue 4 - Winter Year 1391]
  • Ebrahimi.Reza Investigation onthe effect of both Content and Type of Carbon on Low Temperature Synthesis of SiC by Using Magnesiothermal Reduction Process [ Vol.5, Issue 1 - Autumn Year 1393]
  • Ebrahimi.Reza [ Vol.3, Issue 4 - Winter Year 1391]
  • Ebrahimi.Reza [ Vol.5, Issue 3 - Spring Year 1394]
  • Ebrahimnezhad.Mehrdad The Effect of Silver Nanoparticles on AC Magnetic Susceptibility of High Temperature Y123 Superconductor [ Vol.12, Issue 3 - Autumn Year 1400]
  • edris.hossein [ Vol.4, Issue 1 - Spring Year 1392]
  • eftekhari.laleh [ Vol.2, Issue 2 - Summer Year 1390]
  • eghbali.bit allah [ Vol.1, Issue 2 - Winter Year 1389]
  • Ehrambaf.Leila Synthesis of strontium titanate from celestite concentrate [ Vol.10, Issue 3 - Autumn Year 1398]
  • Ehsani.Naser Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [ Vol.7, Issue 4 - Summer Year 1396]
  • eipjkoe.eipjkoe The effect of calcium carbonate particles on the wear behavior of nano-composite gear PA6/PP/Nano CaCO3 [ Vol.6, Issue 3 - Summer Year 1395]
  • Emadi.Rahmatollah [ Vol.1, Issue 2 - Winter Year 1389]
  • Emami.Hosein Effect of Various Heat Treatment Conditions on Nickel Ferrite Nanoparticles and Investigating its Sensitivity to Formaldehyde [ Vol.11, Issue 4 - Winter Year 1399]
  • Emami.Masood Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [ Vol.8, Issue 4 - Summer Year 1397]
  • Emami.Masood Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [ Vol.9, Issue 1 - Autumn Year 1397]
  • Enayati.Mohammad-Hossein Effect of mechanical alloying and heat treatment process on the phase transformation of Ni-Cr-Al powders mixture [ Vol.1, Issue 1 - Autumn Year 1389]
  • entezari.monir sadat [ Vol.3, Issue 1 - Spring Year 1391]
  • entezari.monir sadat Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [ Vol.7, Issue 2 - Winter Year 1395]
  • Eqra.Rahim Investigating the Effect of Co-Precipitation Synthesis Time of LiNi0.8Co0.15Al0.05O2 Cathode and Its Structural and Electrochemical Evaluation in Lithium-ion Battery [ Vol.13, Issue 1 - Spring Year 1401]
  • Esfandiyari.Hooman Studying mechanical behavior of non-wrinkled phosphorene nanotubes under uniaxial loading [ Vol.8, Issue 2 - Winter Year 1396]
  • Eskandari.Hamed Effect Of Quenching and Tempering Temperature on the Fracture Quality of GS-45CrNiMo4-2 Steel, Through the Quench-Temper Heat Treatment Cycle [ Vol.9, Issue 2 - Winter Year 1397]
  • Eskandari.Mostafa Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [ Vol.11, Issue 3 - Autumn Year 1399]
  • Eskandari.Mostafa THE EFFECT OF MICROSTRUCTURAL CHANGES ON THE CORROSION PROPERTIES OF 310S AUSTENITIC STAINLESS STEEL AFTER THERMOMECHANICAL TREATMENT [ Vol.13, Issue 1 - Spring Year 1401]
  • Eskandari.Mostafa Tensile behavior of AZ91 alloy containing silver and under different casting conditions [ Vol.13, Issue 4 - Winter Year 1401]
  • eslahi.mohammad [ Vol.3, Issue 3 - Autumn Year 1391]
  • Eslami.samira Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting [ Vol.14, Issue 3 - Autumn Year 1402]
  • Esmaeili.Narges Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant [ Vol.13, Issue 4 - Winter Year 1401]
  • Esmaeilpour.mohsen Microbial Corrosion in Cooling Water of Lushan Shahid Beheshti Power Plant [ Vol.13, Issue 3 - Autumn Year 1401]
  • Esmaeilpour.mohsen Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant [ Vol.13, Issue 4 - Winter Year 1401]
  • Etemad.Arash Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process [ Vol.9, Issue 1 - Autumn Year 1397]
  • Etminanfar.Mohammadreza Introduction: Titanium alloys containing the β phase have much better corrosion resistance. Some alloying elements, such as Mo, stabilize this phase. Among the Ti alloys that contain this element, the Ti-10Mo alloy is of particular importance. If this alloy is produced using selective laser melting (SLM), it will be an approach that is user-friendly due to the nature of the process. Methods: Samples were printed by SLM process. The constituent phases were determined by XRD. The microstructure was evaluated using optical and scanning electron microscopes. Corrosion behavior was evaluated by cyclic potentiodynamic polarization and electrochemical impedance spectroscopy. Findings: In the XRD pattern of pure Ti powder and printed sample, α and α/α' phases are seen, respectively. However, Ti-10Mo powder mixture consists of α and Mo phases, the β phase is more dominant in printed sample because of the Mo penetration in the Ti matrix. As well as, in the microstructure of Ti10Mo the beta phase is seen as Mo-rich streaks, whereas in pure Ti it is found relatively negligible as epitaxially grown primary columnar β grains with acicular α' martensite phase. Mo addition to pure Ti reduces its passive current density and stabilize oxide film. However, Ti-10Mo alloy, with its various phases and galvanic couples, experiences rupture of the passive oxide film at higher potentials, leading to pitting corrosion. The impedance module value of Ti-10Mo is higher than that of pure Ti. Both samples have a double passive oxide film, with Ti-10Mo alloy exhibiting higher resistance than pure Ti. [ Vol.15, Issue 1 - Spring Year 1403]
  • Etminanfar.Mohammadreza Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering [ Vol.13, Issue 2 - Summer Year 1401]
  • Ezadi.Hadi A Review of the Most Important Methods for Severe Plastic Deformation of Titanium [ Vol.14, Issue 2 - Summer Year 1402]
  • Ezat Pour.Hamid Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy [ Vol.8, Issue 4 - Summer Year 1397]

F

  • falahati aghda.safa Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [ Vol.8, Issue 3 - Spring Year 1397]
  • Fallah-arani.Hesam Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [ Vol.10, Issue 1 - Spring Year 1398]
  • Farahbakhsh.Iman Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [ Vol.8, Issue 3 - Spring Year 1397]
  • Farahbakhsh.Iman Synthesis and Study of Properties of Bioactive Glass (45S)/TiO2/Fluorapatite Nanocomposite [ Vol.8, Issue 4 - Summer Year 1397]
  • Farahbakhsh.Iman Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [ Vol.7, Issue 3 - Spring Year 1396]
  • faraji.reza Fabrication and investigation of the properties of a water-based acrylic nanocomposite [ Vol.8, Issue 4 - Summer Year 1397]
  • farajzadeh.فرج زاده [ Vol.2, Issue 3 - Autumn Year 1390]
  • farbod.mansoor Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [ Vol.7, Issue 4 - Summer Year 1396]
  • Farghadin.Mohammadhossein The investigation of Structural and Magnetic Properties of Lanthanum and Barium Located into Multiferroic Ferrite Bismuth Nanoparticles in the Presence of Sugar Based Natural Surfactants Using Coprecipitation Approach [ Vol.12, Issue 3 - Autumn Year 1400]
  • farhadi varmarz abadi.shahla [ Vol.3, Issue 3 - Autumn Year 1391]
  • farhadi varmarz abadi.shahla [ Vol.3, Issue 4 - Winter Year 1391]
  • Farhadinia.Mahmood [ Vol.5, Issue 3 - Spring Year 1394]
  • farhangi.hassan Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure [ Vol.14, Issue 1 - Spring Year 1402]
  • farhangi.hassan Microstructural characterization and mechanical properties of IN617 superalloy after long-term operation [ Vol.12, Issue 2 - Summer Year 1400]
  • farhangi.hassan Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy [ Vol.13, Issue 4 - Winter Year 1401]
  • farjam.mohammad Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology [ Vol.12, Issue 1 - Spring Year 1400]
  • Farzadi.Ali Effect of heat input on microstructure, mechanical properties and corrosion behavior of 5083-H321 aluminum alloy welded joint using P-MIG process [ Vol.7, Issue 4 - Summer Year 1396]
  • Fatehi Kivi.Amir Inhibition of Copper Corrosion by Self-Assembled Thin Films of Schiff Bases in Acidic Media  [ Vol.5, Issue 1 - Autumn Year 1393]
  • fathi koohanjani.fahimeh [ Vol.3, Issue 2 - Summer Year 1391]
  • Fathi Vajargah.Kourosh [ Vol.3, Issue 3 - Autumn Year 1391]
  • fathi.Mohammad Hossein [ Vol.3, Issue 4 - Winter Year 1391]
  • fathi.Mohammad Hossein [ Vol.3, Issue 4 - Winter Year 1391]
  • Fathyunes.Leila Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering [ Vol.13, Issue 2 - Summer Year 1401]
  • Fattahi Andbil.Azam [ Vol.2, Issue 1 - Spring Year 1390]
  • Fazeli Tehrani.Alimohammad Effect of MCrAlY coating on crack formation during thermal fatigue testing of a directionally solidified Nickle based superalloy [ Vol.13, Issue 4 - Winter Year 1401]
  • fazlalizadeh.reza Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [ Vol.7, Issue 4 - Summer Year 1396]
  • Fazli.Mehdi Investigation of Mechanical Properties of Al-Al2O3 Composites Synthesized By Spark Plasma Sintering [ Vol.7, Issue 2 - Winter Year 1395]
  • Firouzi.Sorena [ Vol.2, Issue 3 - Autumn Year 1390]
  • forghani.farsad Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions [ Vol.11, Issue 4 - Winter Year 1399]

G

  • Geranmayeh.A.R. Indentation creep behavior of AZ61-0.7Si-xCa magnesium alloys [ Vol.10, Issue 1 - Spring Year 1398]
  • Geranmayeh.A.R. Investigation of creep behavior of ME21 and MX21 magnesium alloys [ Vol.9, Issue 2 - Winter Year 1397]
  • ghadamdezfuli.mohammadamin improvement of mechanical properties and hot cracking susceptibility of 304 stainless steel weld joints with the simultaneous electromagnetic vibration application [ Vol.9, Issue 1 - Autumn Year 1397]
  • Ghaedmohammady.Mohammad javad Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling [ Vol.3, Issue 4 - Winter Year 1391]
  • Ghafari.Gholamreza Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing [ Vol.13, Issue 2 - Summer Year 1401]
  • Ghaffari yekta.Mohammad mehdi analysis of plastic instability during sandwich sheet rolling [ Vol.1, Issue 1 - Autumn Year 1389]
  • Ghaffari Yekta.Mohammad Mehdi analysis of plastic instability during sandwich sheet rolling [ Vol.1, Issue 1 - Autumn Year 1389]
  • Ghaffari.Gholamreza Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast A216 alloy [ Vol.12, Issue 4 - Winter Year 1400]
  • Ghahraman Afshar.Majid Microbial Corrosion in Cooling Water of Lushan Shahid Beheshti Power Plant [ Vol.13, Issue 3 - Autumn Year 1401]
  • Ghahraman Afshar.Majid Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant [ Vol.13, Issue 4 - Winter Year 1401]
  • Ghahremani.AliReza Fabrication of silver conductive lines by spray deposition method [ Vol.14, Issue 3 - Autumn Year 1402]
  • Ghalandari.Laleh Mechanical and Corrosion Properties of Graphene Oxide-Copper Nano-composites produced by the accumulative Roll Bonding (ARB) method [ Vol.11, Issue 1 - Spring Year 1399]
  • Ghalandari.Laleh [ Vol.2, Issue 1 - Spring Year 1390]
  • Ghani Kolahloo.Niloofar Aluminothermic reduction of zinc sulfide induced ball milling-Effect of ZnS:Al molar ratio on the raw mixture [ Vol.9, Issue 2 - Winter Year 1397]
  • Gharavi.Farhad [ Vol.5, Issue 3 - Spring Year 1394]
  • Gharbani.Parvin Study of tea compost column biofilter efficiency to remove some heavy metal ions from aqueous solutions [ Vol.7, Issue 4 - Summer Year 1396]
  • Ghasem Zadeh.Mohammad Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [ Vol.11, Issue 3 - Autumn Year 1399]
  • Ghasemalinezhad Shirazifard.Nazanin Investigation of crystallization kinetics of Co-Fe-Ta-Hf-B melt-spun glassy ribbon with a high thermal stability under isochronal condition [ Vol.8, Issue 4 - Summer Year 1397]
  • Ghasemi Banadkouki.Seyed Sadegh Superior improvement of tensile properties in a low alloy medium silicon DIN 1.5025 steel under single step quenching and partitioning heat treatment compared to fully martensitic conditions [ Vol.11, Issue 2 - Summer Year 1399]
  • Ghasemi Banadkouki.Seyed Sadegh Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [ Vol.10, Issue 3 - Autumn Year 1398]
  • Ghasemi Banadkouki.Seyed Sadegh Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [ Vol.11, Issue 3 - Autumn Year 1399]
  • Ghasemi Banadkouki.Seyed Sadegh Investigating the Effect of Intercritical Annealing Heat Treatment on the Quenching and Partitioning of Ferrite-Bainite-Martensite Microphases in High-Silicon Low-Alloy DIN 1.5025 Steel [ Vol.14, Issue 2 - Summer Year 1402]
  • Ghasemi Banadkouki.Seyed Sadegh Comparison of Microstructure and Mechanical Properties of Mo40 Steel in Ferrite-Martensite dual phase and quenched tempered condition [ Vol.9, Issue 1 - Autumn Year 1397]
  • ghasemi piranlu.fardin Fabrication of Fe3O4/SiO2/ZnO photocatalytic composite with core/shell/shell Nanostructure and characterized its [ Vol.8, Issue 4 - Summer Year 1397]
  • Ghasemi.leila Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [ Vol.14, Issue 1 - Spring Year 1402]
  • Ghaseminejad.Hossein Microbial Corrosion in Cooling Water of Lushan Shahid Beheshti Power Plant [ Vol.13, Issue 3 - Autumn Year 1401]
  • Ghaseminejad.Hossein Detection and Analysis of Microbial Influenced Corrosion in Cooling Tower of Shahid Mofateh Power Plant [ Vol.13, Issue 4 - Winter Year 1401]
  • Ghasvari.Mohsen Effect of Ablation Casting on Microstructure of a Magnesium Alloy [ Vol.8, Issue 4 - Summer Year 1397]
  • Ghatee.Mojtaba Synthesis and characterization of copper based spinel coating on alumina substrate for spark plug aero-engine application [ Vol.12, Issue 3 - Autumn Year 1400]
  • Ghayour.Hamid The effect of deep cryogenic treatment on the hardness and wear behavior of Din 1.2344 tool steel [ Vol.7, Issue 2 - Winter Year 1395]
  • Ghayour.Hamid Characterization of mechanical and corrosion behaviour of multilayered Cu/Al/Al2O3 nano-composite produced by ARB process [ Vol.7, Issue 4 - Summer Year 1396]
  • Ghayour.Hamid Investigating the effect of tungsten and heat treatment on microstructure and wear behavior of Ni-hard 4 cast iron [ Vol.6, Issue 3 - Summer Year 1395]
  • ghayour.mahbube The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [ Vol.7, Issue 2 - Winter Year 1395]
  • ghayour.mahbube [ Vol.5, Issue 3 - Spring Year 1394]
  • Gheisari.Khalil Allah Evaluation of corrosion inhibition effect of hybrid organic Ziziphus spina-christi leaf extract and zinc sulfate corrosion inhibitor on mild steel in saline solutions [ Vol.13, Issue 1 - Spring Year 1401]
  • Gheisari.Khalil Allah The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [ Vol.11, Issue 3 - Autumn Year 1399]
  • Gheisari.Khalil Allah Investigation of Structure and Magnetic Properties of Ni Ferrite Powders Synthesized by Plasma Arc Discharge [ Vol.7, Issue 4 - Summer Year 1396]
  • Gheisari.Khalil Allah Dielectric Properties of Multiferroic Composite Consisting Lithium Ferrite and Bismuth Titanate Synthesized by Combustion Method [ Vol.8, Issue 2 - Winter Year 1396]
  • Gheisari.Khalil Allah The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [ Vol.11, Issue 4 - Winter Year 1399]
  • Gheisari.Khalilollah Evaluation of corrosion inhibition effect of hybrid organic Ziziphus spina-christi leaf extract and zinc sulfate corrosion inhibitor on mild steel in saline solutions [ Vol.13, Issue 1 - Spring Year 1401]
  • ghobadi.mohammadreza [ Vol.3, Issue 1 - Spring Year 1391]
  • Ghobeiti Hasab.Mehdi Investigation of the effect of current intensity and frequency in PC-GTAW on microstructural evolutions of weld joints of Hastelloy B-2 superalloy [ Vol.10, Issue 3 - Autumn Year 1398]
  • Gholami.Mehrdad The gravimetric,, impedance, and morphology study of pyrrole-formylpyrrole copolymer synthesized by electro-polymerization [ Vol.12, Issue 4 - Winter Year 1400]
  • Gholi Mesgarha.Samaneh [ Vol.5, Issue 4 - Summer Year 1394]
  • Ghorbaian.Babak Application of the response surface method in optimizing the thickness and hardness of vanadium carbide coatings created by the electrolytic plasma method [ Vol.9, Issue 2 - Winter Year 1397]
  • Ghorbani.Hassan Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure [ Vol.14, Issue 1 - Spring Year 1402]
  • Ghorbani.Mazaher Inhibition of Copper Corrosion by Self-Assembled Thin Films of Schiff Bases in Acidic Media  [ Vol.5, Issue 1 - Autumn Year 1393]
  • Ghorbani.Reza Corrosion assessment of Amine regenerator column of SPGC using process simulation in gas sweetening unit to mitigate corrosion rate by controlling process parameters [ Vol.10, Issue 3 - Autumn Year 1398]
  • Ghorbanian.Babak Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method [ Vol.10, Issue 2 - Summer Year 1398]
  • Golestanifard.Farhad Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation [ Vol.6, Issue 2 - Winter Year 1394]
  • Golestanipour.Masoud Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [ Vol.6, Issue 2 - Winter Year 1394]
  • Golestanipour.Masoud An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [ Vol.7, Issue 3 - Spring Year 1396]
  • Golestanipour.Masoud Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling [ Vol.3, Issue 4 - Winter Year 1391]
  • goodarzian.nooreddin Stabilization of Doxorubicin Drug on Graphene Oxide Nanosystem and Computer simulation Study (In-Silico) on Topoisomerase II Enzyme [ Vol.15, Issue 1 - Spring Year 1403]

H

  • Habibnia.Mostafa Experimental study of forming Parts with central blister by Incremental forming process with positive-negative forming pattern [ Vol.10, Issue 4 - Winter Year 1398]
  • hadad sabzevar.Mohsen The effect of carbon nanotube surface modification on conductivity behavior of carbon nanotube reinforced polythene matrix hybrid HDPE composite with segregate structure [ Vol.13, Issue 3 - Autumn Year 1401]
  • haddad sabzevari.mohsen In Situ fabrication of (Cu-Cr)-Al2O3 nanocomposite [ Vol.1, Issue 1 - Autumn Year 1389]
  • haddad sabzevari.mohsen Effect of Cooling Rate and Grain Refining Agents on Microstructure Characteristics of Al-Cu Alloys by Computer- Aided Cooling Curve Method [ Vol.6, Issue 4 - Spring Year 1395]
  • Hadian.Hooman Investigation of effective parameters on dissimilar infrared brazing for Ti-6Al-4Vv and SS316 L by Ag Base filler metal [ Vol.11, Issue 3 - Autumn Year 1399]
  • Hafeze.Shahram [ Vol.2, Issue 2 - Summer Year 1390]
  • hafezi.fatemeh [ Vol.5, Issue 2 - Winter Year 1393]
  • Haghighi.Mohammad Effect of Si/Al Ratio on Physicochemical Properties of Nanostructured LaAPSO-34 for Conversion of Methanol to Light Olefins [ Vol.6, Issue 2 - Winter Year 1394]
  • Haghighi.ٰVida Fabrication and Evaluation of Surface and Biodegradable Properties of Polycaprolactone/Keratin Nanofibers Scaffolds containing Carbon Nanotube for Use in Bone Tissue Engineering [ Vol.11, Issue 1 - Spring Year 1399]
  • Hajisafari.Mahmoud Study of PEO on the fatigue behavior of titanium alloy Ti-6Al-4V [ Vol.8, Issue 3 - Spring Year 1397]
  • Hajisafari.Mahmoud Investigation Corrosion Fatigue Behaviours of 7075-T6 Aluminum Alloy in Sea Waterr [ Vol.8, Issue 1 - Autumn Year 1396]
  • Hajizadeh.mahdi Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites [ Vol.6, Issue 1 - Autumn Year 1394]
  • Halali.Mohammad Effect of Chlorine in Perovskite Layers Morphology and Efficiency of Perovskite Solar Cells in One step & Spin-Dip Deposition Methods [ Vol.9, Issue 2 - Winter Year 1397]
  • Hamedi.Elham protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy [ Vol.10, Issue 2 - Summer Year 1398]
  • HASANI.Arman Effect of the power type of the general flow function in texture simulation of ECAP [ Vol.12, Issue 2 - Summer Year 1400]
  • hasani.mehri Thermodynamic Analysis of Pressureless Sintering of B4C-Si Nano Composite by Factsage Software [ Vol.4, Issue 5 - Spring Year 1393]
  • Hasanshahi.Mohammad Mehdi [ Vol.5, Issue 2 - Winter Year 1393]
  • hasanvand.arefeh Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling [ Vol.3, Issue 4 - Winter Year 1391]
  • hasanvand.maryam Investigating the effect of banding on the impact resistance behavior of microalloy steel used in pipelines [ Vol.3, Issue 4 - Winter Year 1391]
  • hasanzadeh.neda Stabilization of Doxorubicin Drug on Graphene Oxide Nanosystem and Computer simulation Study (In-Silico) on Topoisomerase II Enzyme [ Vol.15, Issue 1 - Spring Year 1403]
  • Hasanzadeh.Sadegh Ali Effect of Mechanical Milling Time on the Synthesis of Hydroxyapatite Nanoparticles by Mechanochemical Method [ Vol.10, Issue 1 - Spring Year 1398]
  • Hashemi.Babak Investigating the effect of replacing CaO with CaF2 on bioactivity and compressive strength of 45S5 glass ceramic synthesized from soda-lime glass waste by solid state method [ Vol.14, Issue 1 - Spring Year 1402]
  • Hashemi.Babak Investigating the Effect of Co-Precipitation Synthesis Time of LiNi0.8Co0.15Al0.05O2 Cathode and Its Structural and Electrochemical Evaluation in Lithium-ion Battery [ Vol.13, Issue 1 - Spring Year 1401]
  • Hashemi.Babak Effect of Neodymium and Yttrium oxides on the Structural and Electrochemical Properties of LiFePO4/C Composite as Cathode of lithium ion Batteries Synthesized by Solid State Method [ Vol.11, Issue 4 - Winter Year 1399]
  • Hashemi.Babak Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance [ Vol.7, Issue 4 - Summer Year 1396]
  • Hashemi.Babak Investigation of Effect of Heat Treatment on Produced Phases in 45S5 Glass-Ceramics Synthesized in the Forms of Powder and Pellet, and Investigation of Their Bioactivity [ Vol.9, Issue 2 - Winter Year 1397]
  • Hashemi.Babak Neutron Absorption Properties of Geopolymeric Composite used Taftan Mountain Volcanic Ash [ Vol.10, Issue 3 - Autumn Year 1398]
  • Hashemi.Ramin [ Vol.5, Issue 4 - Summer Year 1394]
  • hashemian.Nahid Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam [ Vol.7, Issue 4 - Summer Year 1396]
  • Hashempour Cheshmegol.Sayed Ahmad Optimizing synthesis parameters of silver nanowires by polyol method [ Vol.12, Issue 3 - Autumn Year 1400]
  • Hassanpour Roodbaraki.Maryam [ Vol.2, Issue 4 - Winter Year 1390]
  • Hassanpour.Ahmad Growth and investigation of magnetic and optical properties of Fe3O4@CuO core-shell nanostructures [ Vol.9, Issue 2 - Winter Year 1397]
  • Hassanzadeh.S.A. Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [ Vol.10, Issue 4 - Winter Year 1398]
  • Hassanzadeh.S.A. Investigation on the effect of frequency and duty cycle on nano-crystalline TiO2 coatings produced by plasma electrolytic oxidation [ Vol.9, Issue 1 - Autumn Year 1397]
  • Hatami kakesh.Farzin Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [ Vol.6, Issue 2 - Winter Year 1394]
  • Hatamimanesh.Masoud Investigation of the Efficiency, Kinetics and Isothermic Behavior of Hexavalent Chromium Adsorption from Aqueous Solutions by Using Bioactive Adsorbents (Oak, Pomegranate and Egg Shell) [ Vol.10, Issue 3 - Autumn Year 1398]
  • HAYATI.PAYAM Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology [ Vol.12, Issue 1 - Spring Year 1400]
  • Hayati.Raziye Synthesis of barium carbonate by mechanochemical method [ Vol.13, Issue 2 - Summer Year 1401]
  • Hayati.Raziye Synthesis of strontium titanate from celestite concentrate [ Vol.10, Issue 3 - Autumn Year 1398]
  • Hayati.Raziye Investigating the effects of 2.5 mol% Ce doping on electrostriction behavior of lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics [ Vol.10, Issue 1 - Spring Year 1398]
  • Hayati.Raziye Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [ Vol.11, Issue 3 - Autumn Year 1399]
  • Hayati.Raziyeh Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process [ Vol.14, Issue 2 - Summer Year 1402]
  • Hayati.Raziyeh Synthesis and characterization of bio-nanocomposite of FeOOH-AC and its application in the removal of methyl orange anionic dye [ Vol.14, Issue 3 - Autumn Year 1402]
  • Hazari.Narges [ Vol.3, Issue 3 - Autumn Year 1391]
  • hedayati.samane Production of Porous Carbon Nanoparticles by Usingzinc Layered Gallate Nanohybrid Precursors and Investigate Its Aapplications as Polymeric Fuel Cell Cathode Catalyst [ Vol.6, Issue 2 - Winter Year 1394]
  • Heidari.Gholamreza Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [ Vol.7, Issue 4 - Summer Year 1396]
  • Heidarzade Sohi.Mahmoud Dry sliding wear behavior of Astaloy85Mo steel surface melted by gas tungsten arc welding [ Vol.7, Issue 4 - Summer Year 1396]
  • Heidarzade Sohi.Mahmoud Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings [ Vol.6, Issue 4 - Spring Year 1395]
  • Henryrit.Henryrit Investigating the simultaneous role of clay nanoparticles and strain rate on the tensile behavior of polyethylene matrix nanocomposite [ Vol.13, Issue 4 - Winter Year 1401]
  • Henryrit.Henryrit Investigation of the Effect of Strain Rate on Tensile Properties of Polyurethane Using Eyring Model [ Vol.7, Issue 1 - Autumn Year 1395]
  • Heshmat Dehkordi.Ebrahim [ Vol.5, Issue 2 - Winter Year 1393]
  • Heydari Aghjivan.Soror [ Vol.1, Issue 2 - Winter Year 1389]
  • heydari.mina [ Vol.2, Issue 1 - Spring Year 1390]
  • Homayooni.Fatemeh Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide [ Vol.12, Issue 2 - Summer Year 1400]
  • Honarpisheh.Mohammad The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process [ Vol.8, Issue 4 - Summer Year 1397]
  • hosein zadeh.farhad [ Vol.4, Issue 2 - Summer Year 1392]
  • Hoseini robat.Shayeste sadat [ Vol.5, Issue 3 - Spring Year 1394]
  • Hosseinabadi.Navid The investigation of Structural and Magnetic Properties of Lanthanum and Barium Located into Multiferroic Ferrite Bismuth Nanoparticles in the Presence of Sugar Based Natural Surfactants Using Coprecipitation Approach [ Vol.12, Issue 3 - Autumn Year 1400]
  • Hosseini.Fatemehsadat Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [ Vol.6, Issue 1 - Autumn Year 1394]
  • Hosseini.Ramin Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [ Vol.8, Issue 4 - Summer Year 1397]
  • Hosseini.Seyyed Mohammad Ali Evaluation of Metoral pill as an effective and novel inhibitor for corrosion of mild steel in acidic media [ Vol.9, Issue 2 - Winter Year 1397]
  • Hosseini.Vahid Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [ Vol.11, Issue 4 - Winter Year 1399]
  • Hosseini.Zakieh The effect of manganese impurity on the interlayer Al/PVP:CdS/P-Si Schottky structure and its dielectric properties [ Vol.12, Issue 1 - Spring Year 1400]
  • Hosseni.Zahra Application of Graphene Oxide Quantum Dots in Planar Perovskite Solar Cell [ Vol.12, Issue 2 - Summer Year 1400]
  • Houshmand.Mohammad Root causes analyzed of leakage on the tank bottom using simulation cathodic protection [ Vol.10, Issue 2 - Summer Year 1398]

I

  • ibrahimi.e Introduction to Backscattered Electron Diffraction (EBSD) [ Vol.4, Issue 1 - Spring Year 1392]
  • ICHTeetle.ICHTeetle [ Vol.5, Issue 2 - Winter Year 1393]
  • ICHTeetle.ICHTeetle [ Vol.2, Issue 1 - Spring Year 1390]
  • Isafi.Salah Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [ Vol.10, Issue 1 - Spring Year 1398]
  • Islam.Maksudul Diffusion Bonded Alumina Bodies Using Hydride Nanopowders Interlayers and Structural Investigation of Joint Interface [ Vol.5, Issue 1 - Autumn Year 1393]
  • Islam.Nazrul Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam [ Vol.7, Issue 4 - Summer Year 1396]

J

  • Jafari.Hamidreza Fabrication of Aluminum Foam by ARB and Investigation on Its Friction Stir Welded Joint Properties [ Vol.5, Issue 1 - Autumn Year 1393]
  • Jafarizadeh.Tahereh Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology [ Vol.12, Issue 1 - Spring Year 1400]
  • Jahan Biglari.maryam [ Vol.5, Issue 3 - Spring Year 1394]
  • Jahanbakhshi nejad.amirali Synthesis and Characterization of Activated Carbon Photocatalyst Modified with ZnO/SnO2 Nanoparticles and Its Application in the Municipal Wastewater Treatment with Advanced Oxidation Process [ Vol.14, Issue 2 - Summer Year 1402]
  • Jalali.Ali A Review of the Most Important Methods for Severe Plastic Deformation of Titanium [ Vol.14, Issue 2 - Summer Year 1402]
  • Jalilzadeh.Mahdieh Applying Titania and Hydroxyapatite coating on Ti-6Al-4V by PEO and hydrothermal processes and investigating its corrosion behavior in simulated body environment [ Vol.1, Issue 1 - Autumn Year 1389]
  • jamali.kazem A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [ Vol.14, Issue 3 - Autumn Year 1402]
  • Jamasb.Shahriar Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox [ Vol.10, Issue 3 - Autumn Year 1398]
  • Jamshidi.Mahdieh [ Vol.3, Issue 1 - Spring Year 1391]
  • jamshidi.reza [ Vol.5, Issue 2 - Winter Year 1393]
  • Janahmadigol.mahdi [ Vol.3, Issue 4 - Winter Year 1391]
  • Janahmadigol.mahdi [ Vol.3, Issue 4 - Winter Year 1391]
  • jangjou.Ali A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [ Vol.14, Issue 3 - Autumn Year 1402]
  • Javadi.Mehrdad Effect of severe plastic deformation process on mechanical properties of 1.7225 Steel [ Vol.11, Issue 3 - Autumn Year 1399]
  • Javadpour.Sirus Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [ Vol.7, Issue 4 - Summer Year 1396]
  • Javadpour.Sirus A detailed DOE study on temperature, concentration and their interactions on corrosion protection of carbon steel [ Vol.12, Issue 3 - Autumn Year 1400]
  • Javadpour.Sirus Large Eenhancement in Mechanical Properties of Al 2024 Alloy After Single Rolling Pass [ Vol.4, Issue 5 - Spring Year 1393]
  • Javadpour.Sirus Flexural Properties of Epoxy Matrix Composites Reinforced by Milled Fibers [ Vol.6, Issue 4 - Spring Year 1395]
  • Javadpour.Sirus Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [ Vol.6, Issue 1 - Autumn Year 1394]
  • Javadpour.Sirus Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers [ Vol.6, Issue 3 - Summer Year 1395]
  • Javadpour.Sirus [ Vol.3, Issue 1 - Spring Year 1391]
  • Javadpour.Sirus [ Vol.2, Issue 2 - Summer Year 1390]
  • Javadpour.Sirus [ Vol.3, Issue 3 - Autumn Year 1391]
  • Javadpour.Sirus [ Vol.3, Issue 2 - Summer Year 1391]
  • Javanbakht.Mehran Electrochemical Nucleation and Growth of Copper on Molybdenum Substrate: Effect of pH, Potential and Cleaning procedure [ Vol.7, Issue 4 - Summer Year 1396]
  • Javid.Ali Preysler polyoxometalate supported on functionalized graphene oxide nanoparticles: synthesis, identification and investigation of its catalytic activity [ Vol.14, Issue 4 - Winter Year 1402]
  • Javidi.Mehdi [ Vol.3, Issue 2 - Summer Year 1391]
  • Javidi.Mehdi [ Vol.2, Issue 4 - Winter Year 1390]
  • Javidi.Mehdi [ Vol.4, Issue 2 - Summer Year 1392]
  • Javidi.Mehdi An Investigation on Stress Corrosion Cracking Behaviorof API-5L-X52 Steel in Near Neutral pH Solution [ Vol.5, Issue 1 - Autumn Year 1393]
  • Johari.Narges [ Vol.5, Issue 4 - Summer Year 1394]

K

  • kabiri laghab.mehdi Investigation of corrosion resistance of Ti-6Al-4V alloy welding zone Welded by TIG method [ Vol.12, Issue 2 - Summer Year 1400]
  • kafashan.hosein Investigation the effect of In-doping on the structural and optical properties of electrodeposited SnS thin film [ Vol.8, Issue 4 - Summer Year 1397]
  • Kamaei.Pouria Tensile behavior of AZ91 alloy containing silver and under different casting conditions [ Vol.13, Issue 4 - Winter Year 1401]
  • karamian.ebrahim The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [ Vol.6, Issue 2 - Winter Year 1394]
  • karamian.ebrahim [ Vol.5, Issue 4 - Summer Year 1394]
  • Karamouz.Mostafa Comparison of microstructures and mechanical properties of Al 7075 alloy obtained from conventional modified SIMA processes [ Vol.8, Issue 4 - Summer Year 1397]
  • karanian.isa Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes [ Vol.8, Issue 2 - Winter Year 1396]
  • Karbakhsh ravari.banafsheh The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process [ Vol.8, Issue 3 - Spring Year 1397]
  • karimi Yunjali.soraya Investigation of corrosion behavior nanocrystalline Nickel-Cobalt coating by electrodeposition [ Vol.1, Issue 1 - Autumn Year 1389]
  • Karimi Zarchi.Hamid Reza Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [ Vol.10, Issue 3 - Autumn Year 1398]
  • karimi zarchi.zahra [ Vol.2, Issue 2 - Summer Year 1390]
  • karimi.abbas Investigation of Structural and Corrosion properties of MoS2- WC Reinforced Al/18Cu Layered Composite in Marine Environment [ Vol.14, Issue 4 - Winter Year 1402]
  • Karimi.Alireza The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [ Vol.11, Issue 3 - Autumn Year 1399]
  • Kasaei.Seyed Reza A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [ Vol.14, Issue 3 - Autumn Year 1402]
  • Kashefi Torbati.Mehrdad Root causes analyzed of leakage on the tank bottom using simulation cathodic protection [ Vol.10, Issue 2 - Summer Year 1398]
  • kashefi.mohsen Comparison of Microstructure and Mechanical Properties of Mo40 Steel in Ferrite-Martensite dual phase and quenched tempered condition [ Vol.9, Issue 1 - Autumn Year 1397]
  • Kasiri.Masoud [ Vol.3, Issue 3 - Autumn Year 1391]
  • Kasiri.Masoud Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [ Vol.8, Issue 2 - Winter Year 1396]
  • Kasiri.Masoud [ Vol.3, Issue 4 - Winter Year 1391]
  • Kazemeini.Sayed Ehsan [ Vol.2, Issue 4 - Winter Year 1390]
  • kazemi.mozhgan [ Vol.5, Issue 4 - Summer Year 1394]
  • kazemi.mozhgan [ Vol.5, Issue 3 - Spring Year 1394]
  • KennethAdops.KennethAdops Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering [ Vol.7, Issue 2 - Winter Year 1395]
  • Keramatpour.Mehdi [ Vol.4, Issue 2 - Summer Year 1392]
  • Keramatpour.Mehdi Gravitational Effects on Compact Shaping and Microstructure during Supersolidus Liquid Phase Sintering of Cu-10Sn-10Pb [ Vol.6, Issue 4 - Spring Year 1395]
  • Keramatpour.Mehdi Modeling and investigation of the effect of supersolidus liquid phase sintering variables on physical properties and Mechanics of Cu28Zn alloy [ Vol.4, Issue 1 - Spring Year 1392]
  • Keramatpour.Mehdi Spark plasma sintering of aluminum 3000 and 5000 alloys powder obtained from recycling of Used Beverage Cans (UBCs) [ Vol.14, Issue 4 - Winter Year 1402]
  • Keramatpour.Mehdi Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time [ Vol.14, Issue 2 - Summer Year 1402]
  • Keramatpour.Mehdi [ Vol.3, Issue 3 - Autumn Year 1391]
  • Keramatpour.Mehdi [ Vol.3, Issue 2 - Summer Year 1391]
  • Keramatpour.Mehdi Investigating on the microstructure of cross-section and surface of Ti-10Mo alloy produced by selective laser melting [ Vol.14, Issue 3 - Autumn Year 1402]
  • Keramatpour.Mehdi Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method [ Vol.14, Issue 1 - Spring Year 1402]
  • Keramatpour.Mehdi Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering [ Vol.13, Issue 2 - Summer Year 1401]
  • Keramatpour.Mehdi The role of Ex-situ 0.5wt.% B4C reinforcement and later formed In–situ TiC and TiBw on microstructural evolution of Ti-10Mo mixed powder alloy [ Vol.13, Issue 4 - Winter Year 1401]
  • keshavarz.mozhgan The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel [ Vol.8, Issue 1 - Autumn Year 1396]
  • Keshavarz.Sajad Synthesis and direct ink writing of silver ink for fabricating current collecting lines of dye sensitized solar cells [ Vol.13, Issue 3 - Autumn Year 1401]
  • Keshavarzi.Reza ساخت و مشخصه یابی فوتوالکترود تیتانیوم دی اکسید مزو متخلخل قالب گیری شده ی اتصال یافته با بیسموت وانادات [ Vol.12, Issue 4 - Winter Year 1400]
  • khademalizadeh.zahra [ Vol.2, Issue 3 - Autumn Year 1390]
  • khakpour.iman Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings [ Vol.6, Issue 4 - Spring Year 1395]
  • Khalaj.Gholamreza Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method [ Vol.13, Issue 2 - Summer Year 1401]
  • Khalaj.Gholamreza Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast A216 alloy [ Vol.12, Issue 4 - Winter Year 1400]
  • Khalaj.Gholamreza Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate [ Vol.14, Issue 3 - Autumn Year 1402]
  • Khalaj.Gholamreza Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing [ Vol.13, Issue 2 - Summer Year 1401]
  • Khalaj.Gholamreza Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [ Vol.11, Issue 4 - Winter Year 1399]
  • Khalaj.Gholamreza Modelling of austenite decomposition transformation of heat affected zone in API-X65 and X70 pipeline steels [ Vol.9, Issue 1 - Autumn Year 1397]
  • Khalaj.Gholamreza Investigating the effect of different sources of magnesium oxide on the structure and final properties of wall tile bodies containing CaO using rapid firing method [ Vol.14, Issue 1 - Spring Year 1402]
  • Khalaj.Gholamreza Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using the primary sources of Borujerd talc and Abbas Abad calcium carbonate as primary sources [ Vol.13, Issue 4 - Winter Year 1401]
  • Khalaj.Gholamreza Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using Zanjan talc and Abbas Abad calcium carbonate as primary sources [ Vol.13, Issue 3 - Autumn Year 1401]
  • khalasi dezfuli.mehdi Investigation of the effect of current intensity and frequency in PC-GTAW on microstructural evolutions of weld joints of Hastelloy B-2 superalloy [ Vol.10, Issue 3 - Autumn Year 1398]
  • Khalifesoltani.Seyed Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [ Vol.7, Issue 4 - Summer Year 1396]
  • khalil arjmandi.Fatemeh Effect of Aluminum Content in Pack Cementation Mixture on Microstructure and Cyclic Oxidation Performance of Zr-modified Aluminide Coatings [ Vol.6, Issue 4 - Spring Year 1395]
  • khalilo.ali Preparation of UPVC/ SAN/Ag-TiO2 nanocomposite by casting method and characterization of its physical and mechanical properties [ Vol.7, Issue 1 - Autumn Year 1395]
  • khatami.Elahe Sadat Investigation of leaching of zinc from oxide waste using citric acid [ Vol.9, Issue 1 - Autumn Year 1397]
  • Khatibi.Toktam [ Vol.5, Issue 4 - Summer Year 1394]
  • khavandi.Alireza [ Vol.4, Issue 2 - Summer Year 1392]
  • khazaei.yaghoub [ Vol.2, Issue 4 - Winter Year 1390]
  • khazaei.yaghoub Graphene nanosheets film by plasma electrolysis deposition [ Vol.7, Issue 2 - Winter Year 1395]
  • Khezri.Abolfazl Investigation Corrosion Fatigue Behaviours of 7075-T6 Aluminum Alloy in Sea Waterr [ Vol.8, Issue 1 - Autumn Year 1396]
  • Khodabade.Alireza Investigation of gamma precipitation process under effect of strain in Nimonic80A nickel base superalloy [ Vol.12, Issue 1 - Spring Year 1400]
  • Khodabakhshi.Amir Hossein An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [ Vol.10, Issue 4 - Winter Year 1398]
  • khodabandehloo.navid Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [ Vol.8, Issue 2 - Winter Year 1396]
  • khodadad.mahnaz [ Vol.5, Issue 4 - Summer Year 1394]
  • khodai.mohammad The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [ Vol.8, Issue 2 - Winter Year 1396]
  • khorampour.ahmad Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel [ Vol.11, Issue 2 - Summer Year 1399]
  • khordadpour.mohadeseh Investigation of corrosion behavior nanocrystalline Nickel-Cobalt coating by electrodeposition [ Vol.1, Issue 1 - Autumn Year 1389]
  • khorram.sirous Experimental investigation of the efficiency of deposited TiO2 on porous aluminum in pollutant removal: a comparison between PEO and anodizing methods [ Vol.10, Issue 4 - Winter Year 1398]
  • khosravi.mohsen [ Vol.5, Issue 4 - Summer Year 1394]
  • Kianezhad.Mehdi Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA) [ Vol.8, Issue 3 - Spring Year 1397]
  • Kondori.Mahmoud Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [ Vol.6, Issue 1 - Autumn Year 1394]
  • Kooshan.aiyoub Investigation of Filler Metal on the Mechanical and Metallurgical Properties of Welding- Brazing Hybrid Joining of Aluminium to Ggalvanized Steel [ Vol.7, Issue 1 - Autumn Year 1395]
  • Kordjazi.Majedeh Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [ Vol.10, Issue 2 - Summer Year 1398]
  • Koul.Alireza [ Vol.3, Issue 1 - Spring Year 1391]
  • koupaei.narges Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [ Vol.10, Issue 3 - Autumn Year 1398]

L

  • lak.soodabe [ Vol.5, Issue 4 - Summer Year 1394]
  • LesReidly.LesReidly [ Vol.5, Issue 3 - Spring Year 1394]
  • Limooei.Mohammadbagher Production of Open Cell Copper Foam and assessment of foam Substructure [ Vol.8, Issue 3 - Spring Year 1397]
  • Loghavi.Mohammad Mohsen Synthesis of nano divalent silver oxide for using in primary zinc-silver oxide battery [ Vol.8, Issue 1 - Autumn Year 1396]
  • Lotfi Kashani.Farah [ Vol.1, Issue 2 - Winter Year 1389]
  • Lotfi.Behnam Fabrication of Ti Bulk amorphous alloys by mechanical alloying and plasma sintering methods and evaluation of structure and corrosion behavior [ Vol.15, Issue 1 - Spring Year 1403]
  • Lotfi.Behnam synthesis and characterization of Al-Al3Ti in-situ composite produced by fsp using reactive mechanically alloyed powder [ Vol.10, Issue 4 - Winter Year 1398]
  • Lotfi.Behnam [ Vol.5, Issue 3 - Spring Year 1394]
  • Lotfi.Behnam [ Vol.5, Issue 4 - Summer Year 1394]
  • lotfian.Najme Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam [ Vol.7, Issue 4 - Summer Year 1396]

M

  • mahdian.hossein Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance [ Vol.7, Issue 4 - Summer Year 1396]
  • Mahdikhani.Behrouz Effect of severe plastic deformation process on mechanical properties of 1.7225 Steel [ Vol.11, Issue 3 - Autumn Year 1399]
  • Mahmoodan.Morteza Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method [ Vol.13, Issue 2 - Summer Year 1401]
  • mahmoodi.fatemeh [ Vol.5, Issue 4 - Summer Year 1394]
  • Mahmoodi.Mahboubeh [ Vol.5, Issue 3 - Spring Year 1394]
  • Mahmoodi.Mahboubeh Fabrication and Evaluation of Surface and Biodegradable Properties of Polycaprolactone/Keratin Nanofibers Scaffolds containing Carbon Nanotube for Use in Bone Tissue Engineering [ Vol.11, Issue 1 - Spring Year 1399]
  • Mahmoodi.Mahboubeh Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [ Vol.7, Issue 3 - Spring Year 1396]
  • majidi.saman [ Vol.1, Issue 2 - Winter Year 1389]
  • Makrtichian.Sevak Assessment of plastic deformation of the A356 foam sandwich panel during compression and bending tests [ Vol.10, Issue 1 - Spring Year 1398]
  • Malekan.Mehdi Effect of Sr on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [ Vol.8, Issue 4 - Summer Year 1397]
  • Malekan.Mehdi Microstructural Characterization and Damage Mechanism of the First Stage Blade GE MS9001 After Long-term Exposure [ Vol.14, Issue 1 - Spring Year 1402]
  • Malekan.Mehdi Effect of Pb on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy [ Vol.9, Issue 1 - Autumn Year 1397]
  • malifisenta.malifisenta [ Vol.5, Issue 3 - Spring Year 1394]
  • Mami.Shahram [ Vol.5, Issue 3 - Spring Year 1394]
  • Manafi.S. Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [ Vol.7, Issue 3 - Spring Year 1396]
  • Manafi.S. The effect of nano-alumina addition on the properties of high-alumina low-cement self-flowing refractory castables [ Vol.8, Issue 1 - Autumn Year 1396]
  • manteghian.elham A Survey of Mechanism and Kinetic of Oxidation of Welding Lines in Austenitic Stainless Steel AISI321 [ Vol.6, Issue 1 - Autumn Year 1394]
  • Maraki.Mohammadreza A Review of the Most Important Methods for Severe Plastic Deformation of Titanium [ Vol.14, Issue 2 - Summer Year 1402]
  • marmazi.Maryam [ Vol.4, Issue 2 - Summer Year 1392]
  • marmazi.Maryam Effect of mechanical alloying and heat treatment process on the phase transformation of Ni-Cr-Al powders mixture [ Vol.1, Issue 1 - Autumn Year 1389]
  • mashhadi.ali [ Vol.3, Issue 2 - Summer Year 1391]
  • Mashreghi.Ali Fabrication of silver conductive lines by spray deposition method [ Vol.14, Issue 3 - Autumn Year 1402]
  • Mashreghi.Ali Investigation of electrophoretic parameters of TiO2 nanoparticles for fabricating photoanode of dye sensitized solar cells [ Vol.9, Issue 1 - Autumn Year 1397]
  • Mashreghi.Ali Investigating the effect of particle size on Volume-per-atom parameter of TiO2 nanoparticles [ Vol.8, Issue 1 - Autumn Year 1396]
  • Mashreghi.Ali Synthesis and direct ink writing of silver ink for fabricating current collecting lines of dye sensitized solar cells [ Vol.13, Issue 3 - Autumn Year 1401]
  • Mashreghi.Ali Optimizing synthesis parameters of silver nanowires by polyol method [ Vol.12, Issue 3 - Autumn Year 1400]
  • Mashreghi.Alireza [ Vol.5, Issue 2 - Winter Year 1393]
  • Masjedi.Mohamadreza Investigation of Effect of Heat Treatment on Produced Phases in 45S5 Glass-Ceramics Synthesized in the Forms of Powder and Pellet, and Investigation of Their Bioactivity [ Vol.9, Issue 2 - Winter Year 1397]
  • Mazaheri.Mojtaba Synthesizing, characterizing and investigating the crystal structural, electric and magnetic properties of superconducting compound Y2Ba5Cu7Ox [ Vol.10, Issue 3 - Autumn Year 1398]
  • mehdizadeh.mohsen Microstructural characterization and mechanical properties of IN617 superalloy after long-term operation [ Vol.12, Issue 2 - Summer Year 1400]
  • mehdizadeh.mohsen Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions [ Vol.11, Issue 4 - Winter Year 1399]
  • Mehrabadi.Zohreh Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology [ Vol.12, Issue 1 - Spring Year 1400]
  • Mehrafarin.Reza [ Vol.2, Issue 3 - Autumn Year 1390]
  • MIRHAJ.MARJAN Fabrication and Evaluation of Surface and Biodegradable Properties of Polycaprolactone/Keratin Nanofibers Scaffolds containing Carbon Nanotube for Use in Bone Tissue Engineering [ Vol.11, Issue 1 - Spring Year 1399]
  • Mirheidari.Seyed Jaafar An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [ Vol.6, Issue 2 - Winter Year 1394]
  • mirian.seyed hamid [ Vol.4, Issue 1 - Spring Year 1392]
  • mirjani.masoud The Effect of Adding Nanodiamond Particles and Heat Treatment on Hardness and Wear Resistance of Ni-P-Nanodiamond Electroless Nanocomposite Coatings [ Vol.7, Issue 2 - Winter Year 1395]
  • mirzaee.mahlagha [ Vol.5, Issue 2 - Winter Year 1393]
  • mirzaee.mahlagha The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [ Vol.6, Issue 1 - Autumn Year 1394]
  • Mirzaee.Majid Deposition of spinel cobalt nickel on nickel foam by a constant current electrochemical method and its supercapacitor application [ Vol.10, Issue 1 - Spring Year 1398]
  • Mirzaee.Masoud Investigation of gamma precipitation process under effect of strain in Nimonic80A nickel base superalloy [ Vol.12, Issue 1 - Spring Year 1400]
  • Moeinifar.Sadegh Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process [ Vol.5, Issue 1 - Autumn Year 1393]
  • mofid.mohamad amar Investigation of corrosion resistance of Ti-6Al-4V alloy welding zone Welded by TIG method [ Vol.12, Issue 2 - Summer Year 1400]
  • moghaddam.kaveh Production of Open Cell Copper Foam and assessment of foam Substructure [ Vol.8, Issue 3 - Spring Year 1397]
  • moghaddam.kaveh Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery [ Vol.7, Issue 3 - Spring Year 1396]
  • moghaddam.kaveh Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [ Vol.8, Issue 2 - Winter Year 1396]
  • Mohades Khalesi.Seyed Mohammad Reza [ Vol.1, Issue 2 - Winter Year 1389]
  • Mohaghgheghi.Hossein Microstructural Grading of Al-11 wt.%Mg2Si Hypoeutectic Alloy by Centrifugal Casting [ Vol.1, Issue 1 - Autumn Year 1389]
  • Mohaghgheghi.Hossein Applying Titania and Hydroxyapatite coating on Ti-6Al-4V by PEO and hydrothermal processes and investigating its corrosion behavior in simulated body environment [ Vol.1, Issue 1 - Autumn Year 1389]
  • mohamadkhani.kamran [ Vol.5, Issue 3 - Spring Year 1394]
  • mohamadrezaii.marzei Dielectric Properties of Multiferroic Composite Consisting Lithium Ferrite and Bismuth Titanate Synthesized by Combustion Method [ Vol.8, Issue 2 - Winter Year 1396]
  • Mohammadi.Majid Study of Amitriptyline drug adsorption on multi walled carbon nanotube (MWCNT) [ Vol.12, Issue 1 - Spring Year 1400]
  • mohammadkhani.Farzane Experimental investigation of the efficiency of deposited TiO2 on porous aluminum in pollutant removal: a comparison between PEO and anodizing methods [ Vol.10, Issue 4 - Winter Year 1398]
  • mohammadnejad.masumeh Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders [ Vol.6, Issue 3 - Summer Year 1395]
  • mohammadpour.mahsa Flow behavior and microstructural investigation of GTD 111 cast nickel base superalloy during hot pressure test [ Vol.8, Issue 3 - Spring Year 1397]
  • mohannaee.setareh Comparison of oxygen and nitrogen plasmas for production of nano-composite layers of alumina and aluminium [ Vol.7, Issue 3 - Spring Year 1396]
  • Mohassel.Abbas Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide [ Vol.12, Issue 2 - Summer Year 1400]
  • Mohassel.Abbas Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles [ Vol.12, Issue 3 - Autumn Year 1400]
  • Mohassel.Abbas Synthesis of barium carbonate by mechanochemical method [ Vol.13, Issue 2 - Summer Year 1401]
  • Mohassel.Abbas Aluminothermic reduction of zinc sulfide induced ball milling-Effect of ZnS:Al molar ratio on the raw mixture [ Vol.9, Issue 2 - Winter Year 1397]
  • Moheb.Naeimeh Graphene nanosheets film by plasma electrolysis deposition [ Vol.7, Issue 2 - Winter Year 1395]
  • mohebbi.fatemeh investigation the mechanism of the effect of clay nanoparticles on corrosion and wear resistance properties of epoxy nanocomposite coating applied to the surface of the carbon steel substrate [ Vol.7, Issue 3 - Spring Year 1396]
  • Mojir Sheibani.Parman Synthesis and Characterization of Activated Carbon from Rice husk [ Vol.11, Issue 2 - Summer Year 1399]
  • Mojiri.Fakhroddin [ Vol.5, Issue 4 - Summer Year 1394]
  • MOLLA REZAY NIAROJI.REZA [ Vol.3, Issue 3 - Autumn Year 1391]
  • monshi.ahmad [ Vol.1, Issue 2 - Winter Year 1389]
  • monshi.ahmad The Effect of Sodium Hexametaphosphate on the Physical and Mechanical Properties of Monolithic Refractories Prepared from the Wastes of Magnesia - Carbon Bricks [ Vol.6, Issue 2 - Winter Year 1394]
  • monshi.ahmad [ Vol.3, Issue 3 - Autumn Year 1391]
  • Montajabiha.mohamad reza Effect of Heat Treatment and Hot Working on Vibrational and Mechanical Properties of Magnesium Alloy AZ91 [ Vol.8, Issue 3 - Spring Year 1397]
  • monzavi bozorgi.javad Investigation of SiC graded coating formation mechanism on graphite by pack cemetation process and influenece of types of raw material [ Vol.7, Issue 4 - Summer Year 1396]
  • moosavi nejad.mohsen Investigation on Effect of Crystallization Step in Antimony Recovery Using Hydrometallurgical Method in Alkaline Sulphide Solutions [ Vol.10, Issue 4 - Winter Year 1398]
  • Moradi.Moein Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast A216 alloy [ Vol.12, Issue 4 - Winter Year 1400]
  • Moradi.Moein Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using the primary sources of Borujerd talc and Abbas Abad calcium carbonate as primary sources [ Vol.13, Issue 4 - Winter Year 1401]
  • Moradi.Moein Investigating the effect of different sources of magnesium oxide on the structure and final properties of wall tile bodies containing CaO using rapid firing method [ Vol.14, Issue 1 - Spring Year 1402]
  • Moradi.Moein Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using Zanjan talc and Abbas Abad calcium carbonate as primary sources [ Vol.13, Issue 3 - Autumn Year 1401]
  • Moradi.Mona [ Vol.2, Issue 3 - Autumn Year 1390]
  • Moradi.Mona Producing WC-Co coating with electrolytic plasma processing on low carbon steel and investigation its wear resistance [ Vol.7, Issue 4 - Summer Year 1396]
  • Mosalaieepor.Masoud Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [ Vol.10, Issue 3 - Autumn Year 1398]
  • moshksar.mohammad mohsen Influence of Process Parameters on Hot Backward Extrusion of Al 6061 alloy [ Vol.8, Issue 2 - Winter Year 1396]
  • Moslehi Aragh.Milad Investigation of Morphology and production efficiency of Produced Nano-Fibers with multi-nozzle electrospinning process [ Vol.9, Issue 1 - Autumn Year 1397]
  • Mosleh-Shirazi.Sareh A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [ Vol.14, Issue 3 - Autumn Year 1402]
  • motallebi.azadeh Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [ Vol.8, Issue 1 - Autumn Year 1396]
  • motamedi.ameneh [ Vol.2, Issue 3 - Autumn Year 1390]
  • motevalli.saeid Production of composite coating of hard chrome – nano alumina by electroplating from the bath of hexa valence chrome and the study of the hardness and abrasive properties [ Vol.8, Issue 2 - Winter Year 1396]
  • Mousavi Ahranjani.Parisa Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing [ Vol.13, Issue 2 - Summer Year 1401]
  • Mousavi Khoie.Seyed Mohammad Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method [ Vol.10, Issue 2 - Summer Year 1398]
  • Mousavizade Noghabi.Seyyed Mostafa Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [ Vol.10, Issue 3 - Autumn Year 1398]
  • Mousavizadeh.seyyed Mostafa Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy [ Vol.8, Issue 4 - Summer Year 1397]

N

  • naeimi.farid Analysis of Hydrogen-Induced Cracking and Lamination in a Pipeline Steel Based on Fitness-For-Service Assessment [ Vol.13, Issue 2 - Summer Year 1401]
  • naghavi.hedayat [ Vol.5, Issue 3 - Spring Year 1394]
  • Naghdi Chavan.Zahra Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering [ Vol.13, Issue 2 - Summer Year 1401]
  • Najafi.Abolhasan Synthesis of FeCo alloyed nanoparticles with different weight ratios via microemulsion route and studying the magnetic properties [ Vol.11, Issue 4 - Winter Year 1399]
  • Najafi.Abolhassan Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate [ Vol.14, Issue 3 - Autumn Year 1402]
  • Najafi.Abolhassan Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using the primary sources of Borujerd talc and Abbas Abad calcium carbonate as primary sources [ Vol.13, Issue 4 - Winter Year 1401]
  • Najafi.Abolhassan Investigating the effect of different sources of magnesium oxide on the structure and final properties of wall tile bodies containing CaO using rapid firing method [ Vol.14, Issue 1 - Spring Year 1402]
  • Najafi.Abolhassan Investigating the effect of CaO/MgO ratio on the structure and final properties of wall tile bodies in rapid firing using Zanjan talc and Abbas Abad calcium carbonate as primary sources [ Vol.13, Issue 3 - Autumn Year 1401]
  • Najafi.Hamidreza Investigation of gamma precipitation process under effect of strain in Nimonic80A nickel base superalloy [ Vol.12, Issue 1 - Spring Year 1400]
  • Najafi.Seyed Esmaeil An Investigation of Flow Accelerated(assisted) Erosion-Corrosion in High Pressure Economizer Tubes(HP-EC) of Boiler Unite 1 at Kerman Combined Cycle Power Plant [ Vol.5, Issue 1 - Autumn Year 1393]
  • Najari.Hossein Microstructure Evaluation of Acrylonitril-Butadiene Copolymer Nanocomposites Reinforced by Nano-Calcium Carbonate by Permeability Test [ Vol.6, Issue 2 - Winter Year 1394]
  • najmi.lida The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [ Vol.10, Issue 1 - Spring Year 1398]
  • nasirinia.alireza [ Vol.5, Issue 3 - Spring Year 1394]
  • Nasirzadeh.Navid Synthesis and Characterization of Temperature‐Sensitive Hydrogel Copolymer Based on N-isopropylacrylamide for Medical Applications [ Vol.7, Issue 3 - Spring Year 1396]
  • Nasresfahani.Fatemeh [ Vol.2, Issue 4 - Winter Year 1390]
  • Nasrolāhi.Yadolāh The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [ Vol.6, Issue 1 - Autumn Year 1394]
  • Nasseripour.Maryam Growth and investigation of magnetic and optical properties of Fe3O4@CuO core-shell nanostructures [ Vol.9, Issue 2 - Winter Year 1397]
  • nategh.saeid Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process [ Vol.9, Issue 1 - Autumn Year 1397]
  • Nayebi.Behzad Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [ Vol.7, Issue 3 - Spring Year 1396]
  • nayebzade.ramin Investigation of structure and tribological behavior of nanostructured DLC coating, deposited by PACVD and Arc-PVD processes [ Vol.8, Issue 2 - Winter Year 1396]
  • Nazari.Abdolmanaf [ Vol.2, Issue 4 - Winter Year 1390]
  • Nekoubin.Amin [ Vol.3, Issue 2 - Summer Year 1391]
  • nemati.ali Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [ Vol.7, Issue 4 - Summer Year 1396]
  • Nemati.Ali synthesis and investigation of solid electrolyte ion conducting lithium aluminium titanium phosphate [ Vol.10, Issue 2 - Summer Year 1398]
  • Nematy.mohsen [ Vol.3, Issue 2 - Summer Year 1391]
  • Nematy.mohsen [ Vol.2, Issue 3 - Autumn Year 1390]
  • Neyshabouri Mohammadabdi.Atiyeh The effect of carbon nanotube surface modification on conductivity behavior of carbon nanotube reinforced polythene matrix hybrid HDPE composite with segregate structure [ Vol.13, Issue 3 - Autumn Year 1401]
  • nikkhahi.vida Investigation of Effect of Milling Time on Final Microstructure of Nanocrystalline TiB2-TiC Powder Fabricated by MACS Method [ Vol.5, Issue 1 - Autumn Year 1393]
  • Nikmardan.Somayeh Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [ Vol.10, Issue 2 - Summer Year 1398]
  • Noorbakhsh.Armaghan Hydroxyapatite - Hyaluronic acid scaffold production using solvent extraction method [ Vol.10, Issue 2 - Summer Year 1398]
  • Noori.Seyyed Mohammad Effect of sodium carbonate additive on corrosion behavior of nitrocarburized coating by cathodic plasma electrolytic [ Vol.9, Issue 1 - Autumn Year 1397]
  • Nooryan.Mohammadreza Fabrication of Cu-Al2O3 composite tubes through electroforming process and investigation on the effect of alumina particles on corrosion resistance of the tubes [ Vol.11, Issue 3 - Autumn Year 1399]
  • Noroozian.Afsar Investigating the effect of replacing CaO with CaF2 on bioactivity and compressive strength of 45S5 glass ceramic synthesized from soda-lime glass waste by solid state method [ Vol.14, Issue 1 - Spring Year 1402]
  • nosrati.ataollah A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [ Vol.11, Issue 2 - Summer Year 1399]
  • Nourbakhs.. Investigation of two step sintering on microstructure and compresive strenght of nano structured forsterite scaffold using lost foam [ Vol.7, Issue 4 - Summer Year 1396]
  • Nourbakhsh.Amir Abbas Magnesiothermal synthesis of nanostructured SiC from natural zeolite (clinoptilolite),sacarose and mesoporous carbon CMK-1 under Argon atmospher [ Vol.6, Issue 4 - Spring Year 1395]
  • Nourbakhsh.Amir Abbas [ Vol.5, Issue 2 - Winter Year 1393]
  • nouri hasan abadi.keramat allah Investigation of Zinc metallic coating properties formed on low carbon steel in alkaline and sulfate electrolytes by plasma electrolytic saturation [ Vol.6, Issue 4 - Spring Year 1395]
  • Nourian.Mohammad [ Vol.5, Issue 4 - Summer Year 1394]
  • Nozari.Hamed Removal Propargite pesticide from aqueous solution using Penta Aza Tetra Ethylene on Polyacrylamide (PAA-N5) as a novel adsorbent [ Vol.10, Issue 4 - Winter Year 1398]

O

  • OlgaMet.OlgaMet Investigation of Antibacterial Properties of Silver Nanoparticles and Polyethylene-Silver Nanocomposites [ Vol.6, Issue 2 - Winter Year 1394]
  • Omidi.Mahdi Synthesis of g-C3N4/Au nanocomposite as a photocatalyst for hydrogen generation [ Vol.10, Issue 4 - Winter Year 1398]
  • Omidi.Mahdi Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process [ Vol.9, Issue 1 - Autumn Year 1397]
  • Omidvar.Hamid Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system during the Transient Liquid Phase (TLP) [ Vol.11, Issue 1 - Spring Year 1399]
  • Omidvar.Hamid Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles [ Vol.12, Issue 3 - Autumn Year 1400]
  • Omodifard.M.A. Effect of Neodymium and Yttrium oxides on the Structural and Electrochemical Properties of LiFePO4/C Composite as Cathode of lithium ion Batteries Synthesized by Solid State Method [ Vol.11, Issue 4 - Winter Year 1399]
  • Ong.C.K. The Effect of Co Concentration on the Magnetic Properties of Obliquely Sputtered Fe–Co Thin Films [ Vol.11, Issue 3 - Autumn Year 1399]
  • Ong.C.K. The Effect of Oblique Deposition on the Magnetic Behavior of Fe-Co Alloy Thin Films Fabricated by Sputtering Technique [ Vol.11, Issue 4 - Winter Year 1399]
  • otroj.sasan Investigation of key Parameters on the Properties of Cordierite Bonded Porous SiC Composites Produced by Reaction-Bonding Method [ Vol.4, Issue 6 - Summer Year 1393]

P

  • Pahlavani.Amir Effect of Strain Rate on the Hot Tensile Behavior of Invar Alloy [ Vol.6, Issue 4 - Spring Year 1395]
  • pakdaman.farzaneh [ Vol.2, Issue 2 - Summer Year 1390]
  • pakdaman.farzaneh [ Vol.2, Issue 1 - Spring Year 1390]
  • Pakshir.Mahmoud Determination of the Degree of Sensitization in AISI 316 Stainless Steel by the Electrochemical Impedance Technique [ Vol.4, Issue 6 - Summer Year 1393]
  • Pakshir.Mahmoud [ Vol.5, Issue 3 - Spring Year 1394]
  • Pakzaman.Hamid Reza Investigation of abnormal tensile behavior of DIN 16MnCr5 low carbon low alloy steel under ferrite-martensite dual-phase microstructures in comparison with full martensitic condition [ Vol.11, Issue 3 - Autumn Year 1399]
  • Panahi.Farhad [ Vol.3, Issue 1 - Spring Year 1391]
  • parvaz.younes [ Vol.3, Issue 3 - Autumn Year 1391]
  • parvaz.younes The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth [ Vol.7, Issue 2 - Winter Year 1395]
  • payami.fatemeh Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [ Vol.10, Issue 1 - Spring Year 1398]
  • Paydar.Mohammad Hosein Comparison of mechanical, electrical and chemical stability of BaCe0.7Zr0.1Y0.2O3-δ (BCZY7)-(Li/Na)2CO3 proton conductive composite electrolytes fabricated by mechanical mixing and infiltration methods [ Vol.9, Issue 2 - Winter Year 1397]
  • Paydar.Mohammad Hosein An Studying on the Synthesis and Densification Behavior of β''- Alumina Electrolyte for Sodium-Sulfur Batteries [ Vol.6, Issue 2 - Winter Year 1394]
  • Paydar.Mohammad Hosein Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [ Vol.11, Issue 2 - Summer Year 1399]
  • Paydar.Mohammad Hosein Investigating the effect of particle size on microstructure, mechanical properties and electrical conductivity of sodium beta-alumina ceramics [ Vol.10, Issue 2 - Summer Year 1398]
  • Paydar.Mohammad Hosein [ Vol.5, Issue 4 - Summer Year 1394]
  • Paydar.Mohammad Hosein [ Vol.5, Issue 3 - Spring Year 1394]
  • Paydar.Mohammad Hosein Synthesizing and investigation on the electrochemical behavior of (Nd0.9La0.1)1.95Sr0.05Ni0.75Cu0.25O4-d and (Nd0.9La0.1)1.9Sr0.1Ni0.75Cu0.25O4-d cathode electrode for solid oxide fuel cell [ Vol.9, Issue 1 - Autumn Year 1397]
  • Paydar.Mohammad Hosein Fabrication of Cu-Al2O3 composite tubes through electroforming process and investigation on the effect of alumina particles on corrosion resistance of the tubes [ Vol.11, Issue 3 - Autumn Year 1399]
  • paydar.sara Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [ Vol.7, Issue 4 - Summer Year 1396]
  • Peyvandi.Parisa The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [ Vol.11, Issue 2 - Summer Year 1399]
  • photo.photo [ Vol.5, Issue 3 - Spring Year 1394]
  • Pirgholi-Givi.Gholamreza The effect of manganese impurity on the interlayer Al/PVP:CdS/P-Si Schottky structure and its dielectric properties [ Vol.12, Issue 1 - Spring Year 1400]
  • Pirhady Tavandashti.Nahid Investigation of the Synergistic Effect of Soft and Hard Particles on Corrosion and Wear Resistance Behavior of Ni-B-PTFE-Si3N4 Electroless Coating on Carbon Steel [ Vol.12, Issue 1 - Spring Year 1400]
  • poorchini.pooriya synthesis and characterization of Al-Al3Ti in-situ composite produced by fsp using reactive mechanically alloyed powder [ Vol.10, Issue 4 - Winter Year 1398]
  • Pourabdollah.Majid Investigating the role of electrode material and CTAB protective concentration in the synthesis of copper nanoparticles by electrochemical method [ Vol.13, Issue 2 - Summer Year 1401]
  • Pouranvari.Majid [ Vol.2, Issue 3 - Autumn Year 1390]
  • Pouranvari.Majid [ Vol.3, Issue 2 - Summer Year 1391]
  • pourebrahim.taghi [ Vol.4, Issue 1 - Spring Year 1392]
  • Pourmortazavi.Seied Mahdi Study of optical properties, thermal behavior and thermal stability of coated PETN particles with Lithol rubine nano-pigment via ultrasonic technique using Taguchi experimental design method [ Vol.10, Issue 1 - Spring Year 1398]
  • poursafar.ali [ Vol.3, Issue 3 - Autumn Year 1391]
  • Pourshoja.Arezoo Introduction: Titanium alloys containing the β phase have much better corrosion resistance. Some alloying elements, such as Mo, stabilize this phase. Among the Ti alloys that contain this element, the Ti-10Mo alloy is of particular importance. If this alloy is produced using selective laser melting (SLM), it will be an approach that is user-friendly due to the nature of the process. Methods: Samples were printed by SLM process. The constituent phases were determined by XRD. The microstructure was evaluated using optical and scanning electron microscopes. Corrosion behavior was evaluated by cyclic potentiodynamic polarization and electrochemical impedance spectroscopy. Findings: In the XRD pattern of pure Ti powder and printed sample, α and α/α' phases are seen, respectively. However, Ti-10Mo powder mixture consists of α and Mo phases, the β phase is more dominant in printed sample because of the Mo penetration in the Ti matrix. As well as, in the microstructure of Ti10Mo the beta phase is seen as Mo-rich streaks, whereas in pure Ti it is found relatively negligible as epitaxially grown primary columnar β grains with acicular α' martensite phase. Mo addition to pure Ti reduces its passive current density and stabilize oxide film. However, Ti-10Mo alloy, with its various phases and galvanic couples, experiences rupture of the passive oxide film at higher potentials, leading to pitting corrosion. The impedance module value of Ti-10Mo is higher than that of pure Ti. Both samples have a double passive oxide film, with Ti-10Mo alloy exhibiting higher resistance than pure Ti. [ Vol.15, Issue 1 - Spring Year 1403]
  • Pouryani.Mohammadhossein Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [ Vol.7, Issue 4 - Summer Year 1396]
  • poustdouz.amin Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties [ Vol.6, Issue 1 - Autumn Year 1394]
  • Pouyafar.Vahid Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing [ Vol.10, Issue 2 - Summer Year 1398]

R

  • Rabiezadeh.Amin 1 [ Vol.1, Issue 1 - Autumn Year 1389]
  • Rabiezadeh.Amin [ Vol.3, Issue 4 - Winter Year 1391]
  • Rafiei.Mahdi The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process [ Vol.10, Issue 3 - Autumn Year 1398]
  • Rafienia.Mohammad Design and fabrication of electrochemical biosensor based on β-CD-Graphene nanocomposite for specific adsorption of curcumin, chlorpromazine and clomipramine [ Vol.7, Issue 4 - Summer Year 1396]
  • rahimi.saadallah Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding [ Vol.6, Issue 1 - Autumn Year 1394]
  • rahimian.nima [ Vol.3, Issue 3 - Autumn Year 1391]
  • rahimzadeh.ladan The effect of temperature on microstructure during ultra-rapid annealing of severely deformed low-carbon steel [ Vol.11, Issue 2 - Summer Year 1399]
  • Ramazani.Haidar Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [ Vol.10, Issue 2 - Summer Year 1398]
  • ranjbar.khalil In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing [ Vol.8, Issue 4 - Summer Year 1397]
  • Ranjbari.Gohar Investigation of the reduction in area and twist angle effects on the strain distribution, damage and process load of vortex extrusion die [ Vol.11, Issue 4 - Winter Year 1399]
  • Ranjbari.Marjan Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time [ Vol.14, Issue 2 - Summer Year 1402]
  • Ranjbari.Marjan The role of Ex-situ 0.5wt.% B4C reinforcement and later formed In–situ TiC and TiBw on microstructural evolution of Ti-10Mo mixed powder alloy [ Vol.13, Issue 4 - Winter Year 1401]
  • Rashidi.Ali Mohammad A comparative study on the effect of electrodeposition current density on the grain size of Ni and Ni-W nanocrystalline coatings [ Vol.11, Issue 2 - Summer Year 1399]
  • Rashidi.Ali Mohammad Production of machinable ferritic-ausferritic ADI by selection of proper partially austenitizing time [ Vol.10, Issue 2 - Summer Year 1398]
  • Rashidi.Farangis [ Vol.4, Issue 1 - Spring Year 1392]
  • Rasouli.Maryam Characterization of Silica Nanoparticles and Nanocolloid Synthesized in Acidic and Alkaline Media [ Vol.12, Issue 1 - Spring Year 1400]
  • Rasti.Batul An Investigation of Flow Accelerated(assisted) Erosion-Corrosion in High Pressure Economizer Tubes(HP-EC) of Boiler Unite 1 at Kerman Combined Cycle Power Plant [ Vol.5, Issue 1 - Autumn Year 1393]
  • rayatpour.masoume Tracing the creep lifetime degradation of IN738LC superalloy based on the primary carbide decomposition reaction and composition changes in the carbide regions [ Vol.11, Issue 4 - Winter Year 1399]
  • Razaghian Arani.Ahmad Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its electrochemical performance as supercapacitor [ Vol.11, Issue 4 - Winter Year 1399]
  • Razavi.Hussain Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [ Vol.11, Issue 1 - Spring Year 1399]
  • razazi boroujeni.mohammad Evaluation of tribological behavior of PEO composite coating containing SiO2 particles on 7075 aluminum alloy [ Vol.13, Issue 3 - Autumn Year 1401]
  • razazi boroujeni.mohammad Effect of MoS2 Addition on High Temperature Wear Behavior of NiCrBSi Coating Produced by Thermal Spraying [ Vol.14, Issue 2 - Summer Year 1402]
  • Reihanian.Mohsen Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [ Vol.11, Issue 3 - Autumn Year 1399]
  • Rezaei.Atieh The Effect of Adding Nanodiamond Particles and Heat Treatment on Hardness and Wear Resistance of Ni-P-Nanodiamond Electroless Nanocomposite Coatings [ Vol.7, Issue 2 - Winter Year 1395]
  • Rezaei.Mehdi Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions [ Vol.11, Issue 3 - Autumn Year 1399]
  • Rezaeian-delouei.Mehdi Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [ Vol.10, Issue 3 - Autumn Year 1398]
  • Rezaeii Kheybari.Ehsan Study on hot deformation behaviuor of Mg-7.1Gd-2.8Y-1.3Nd-0.4Zn magnesium alloy using hyperbolic sine equation and processing maps [ Vol.11, Issue 1 - Spring Year 1399]
  • rezaie.Navid Synthesis and characterization of copper based spinel coating on alumina substrate for spark plug aero-engine application [ Vol.12, Issue 3 - Autumn Year 1400]
  • Rezazadeh.Hadi Spark plasma sintering of aluminum 3000 and 5000 alloys powder obtained from recycling of Used Beverage Cans (UBCs) [ Vol.14, Issue 4 - Winter Year 1402]
  • Rezazadeh.Hadi Aluminum nanocrystalline powder production from aluminum alloy scrap by solid state recycling method [ Vol.14, Issue 1 - Spring Year 1402]
  • Roodaki.Morteza A detailed DOE study on temperature, concentration and their interactions on corrosion protection of carbon steel [ Vol.12, Issue 3 - Autumn Year 1400]
  • Rostami.Abbas The effect of Si addition on microstructure and tribological properties of Fe-Al claddings produced by GTAW process [ Vol.10, Issue 3 - Autumn Year 1398]
  • Rostami.Mohammad Reza Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process [ Vol.9, Issue 1 - Autumn Year 1397]

S

  • Saadat.Abbas Investigating on effect of heat treatment on microstructure and metallurgical properties of three layers explosively bonded Cu/Al/Cu plates [ Vol.8, Issue 2 - Winter Year 1396]
  • Saadatmehr.Mohammad Amin [ Vol.4, Issue 1 - Spring Year 1392]
  • Saadatmehr.Mohammad Amin [ Vol.2, Issue 3 - Autumn Year 1390]
  • Saatchi.A. [ Vol.4, Issue 1 - Spring Year 1392]
  • Sabahi Namini.Abbas Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time [ Vol.14, Issue 2 - Summer Year 1402]
  • Sabahi Namini.Abbas The role of Ex-situ 0.5wt.% B4C reinforcement and later formed In–situ TiC and TiBw on microstructural evolution of Ti-10Mo mixed powder alloy [ Vol.13, Issue 4 - Winter Year 1401]
  • Saberi Sani.Gholam Reza Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [ Vol.11, Issue 1 - Spring Year 1399]
  • sabet.hamed Study of Microstructure and Mechanical properties of Welded mild steel fabricated by FCAW and Compare with GMAW Process [ Vol.8, Issue 2 - Winter Year 1396]
  • Sabet.Hamed analysis of plastic instability during sandwich sheet rolling [ Vol.1, Issue 1 - Autumn Year 1389]
  • Sabet.Hamed [ Vol.2, Issue 2 - Summer Year 1390]
  • Sabet.Hamed The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method [ Vol.14, Issue 2 - Summer Year 1402]
  • Sabet.Hamed The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process [ Vol.8, Issue 3 - Spring Year 1397]
  • Sabet.Hamed Effects of the Replacement Vanadium to Niobium at E347-16 Electrode on Micro-structure and Corrosion Behaviors of Weld Metal [ Vol.11, Issue 1 - Spring Year 1399]
  • Sabet.Hamed Determination Optimum Boron Quantity Effect on Low Temperature Impact Energy of Mild Steel Weld Metal that Fabricated by Submerge Arc Welding (SAW) [ Vol.6, Issue 1 - Autumn Year 1394]
  • Sabet.Hamed Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [ Vol.11, Issue 1 - Spring Year 1399]
  • Sabet.Hamed [ Vol.3, Issue 2 - Summer Year 1391]
  • Sabet.Hamed [ Vol.2, Issue 1 - Spring Year 1390]
  • Sabet.Hamed Investigating the effect of degree of dilution and interlayer on the abrasion resistance of the hard-wired coated layer of Fe-Cr-C based on SMAW method on plane carbon steel [ Vol.11, Issue 2 - Summer Year 1399]
  • Sadeghi Gooqhari.Mehran Biosynthesis of silver nanopowders and evaluation on their application in cosmetic products [ Vol.8, Issue 1 - Autumn Year 1396]
  • sadeghi.esmaeil Fabrication of Aluminum Foam by ARB and Investigation on Its Friction Stir Welded Joint Properties [ Vol.5, Issue 1 - Autumn Year 1393]
  • sadeghi.meysam [ Vol.4, Issue 1 - Spring Year 1392]
  • sadeghi.meysam [ Vol.3, Issue 1 - Spring Year 1391]
  • sadeghi.meysam [ Vol.2, Issue 3 - Autumn Year 1390]
  • SADEGHI.MOHAMMAD Investigation of High Frequency Resistance Welding (HFRW) Variables on microstructure and mechanical properties of dissimilar joints between chromium-molybdenum low alloy steel tubes to chromium high alloy steels [ Vol.11, Issue 1 - Spring Year 1399]
  • sadeghian.zohreh synthesis and characterization of Al-Al3Ti in-situ composite produced by fsp using reactive mechanically alloyed powder [ Vol.10, Issue 4 - Winter Year 1398]
  • sadeghian.zohreh [ Vol.5, Issue 3 - Spring Year 1394]
  • Sadeghian.Zohreh Fabrication of Ti Bulk amorphous alloys by mechanical alloying and plasma sintering methods and evaluation of structure and corrosion behavior [ Vol.15, Issue 1 - Spring Year 1403]
  • sadeghizadeh.zeinab [ Vol.4, Issue 1 - Spring Year 1392]
  • Sadough.Ali Effect of Ultrasonic Impact Treatment on Fatigue Behavior of Steel Welded Pipes in Petrochemical Corrosive Environment [ Vol.6, Issue 1 - Autumn Year 1394]
  • Saebnoori.Ehsan Inhibition of Copper Corrosion by Self-Assembled Thin Films of Schiff Bases in Acidic Media  [ Vol.5, Issue 1 - Autumn Year 1393]
  • Saebnoori.Ehsan Investigation on the effect of frequency and duty cycle on nano-crystalline TiO2 coatings produced by plasma electrolytic oxidation [ Vol.9, Issue 1 - Autumn Year 1397]
  • Saeedi.Mina Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method [ Vol.8, Issue 1 - Autumn Year 1396]
  • Saeedi.Mina Investigation on the effect of Al addition on synthesis of Ti3SiC2 nanostructure by Mechanical alloying – heat treatment method [ Vol.8, Issue 2 - Winter Year 1396]
  • saeedi.parviz [ Vol.5, Issue 4 - Summer Year 1394]
  • Safa.Mina Investigation of the structure and mechanical properties of aluminum 6061-graphene nanocomposite fabricated by the friction stir processing [ Vol.13, Issue 2 - Summer Year 1401]
  • safarkhanian.mohamad ali Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy [ Vol.10, Issue 2 - Summer Year 1398]
  • safavi.mohamadreza preparation and evaluation of mechanical and thermal properties of epoxy/silica nanocomposites [ Vol.8, Issue 3 - Spring Year 1397]
  • safaviyeh.soheila Effect of mechanical alloying and heat treatment process on the phase transformation of Ni-Cr-Al powders mixture [ Vol.1, Issue 1 - Autumn Year 1389]
  • SAFAVIYEH.SOHEILA Evaluation of microsegregation during dendritic solidification of a binary alloy using phase field method and analytical models [ Vol.1, Issue 1 - Autumn Year 1389]
  • SAFAVIYEH.SOHEILA In Situ fabrication of (Cu-Cr)-Al2O3 nanocomposite [ Vol.1, Issue 1 - Autumn Year 1389]
  • Saghafi Yazdi.Morteza Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its electrochemical performance as supercapacitor [ Vol.11, Issue 4 - Winter Year 1399]
  • Saghafi.Ali-Akbar Root Cause Analysis of Water-Cooled Exhaust Manifold in High Speed Marine Diesel Engine [ Vol.11, Issue 4 - Winter Year 1399]
  • Saghafiyan.Hsan The Effect of Pulsed Laser Parameters on Surface Compositing of H13-TiC [ Vol.8, Issue 3 - Spring Year 1397]
  • sahebian saghi.samaneh The effect of carbon nanotube surface modification on conductivity behavior of carbon nanotube reinforced polythene matrix hybrid HDPE composite with segregate structure [ Vol.13, Issue 3 - Autumn Year 1401]
  • Sajedipour.Davood The Experimental and Numerical Evaluation of the Residual Stress in the Hot Forming Sheet Process for 5083 Aluminum via the Gas Blowing Process [ Vol.7, Issue 1 - Autumn Year 1395]
  • Sajjadi.Seyed Abdolkarim Hardness Prediction in the Ni-Based Superalloy GTD-111 Using Quench Factor Analysis (QFA) [ Vol.8, Issue 3 - Spring Year 1397]
  • Sajjadi.Seyed Abdolkarim Effect of bonding time and temperature on microstructure of GTD-111/ BNi-3 /GTD-111 system during the Transient Liquid Phase (TLP) [ Vol.11, Issue 1 - Spring Year 1399]
  • Sajjadnejad.Mohammad Effect of metallic agent on the carbothermic reduction of titanium dioxide in order to produce titanium carbide [ Vol.12, Issue 2 - Summer Year 1400]
  • Saken azari.Rana [ Vol.3, Issue 2 - Summer Year 1391]
  • Sakhtemanian.Mohammad Reza The effect of ultrasonic vibrations on mechanical properties of low carbon steel-pure titanium bilayer sheet in incremental sheet forming process [ Vol.8, Issue 4 - Summer Year 1397]
  • Salahi.Esmail [ Vol.2, Issue 2 - Summer Year 1390]
  • salahinejad.Erfan Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering [ Vol.6, Issue 1 - Autumn Year 1394]
  • salari.azizollah [ Vol.4, Issue 2 - Summer Year 1392]
  • Salmani.Mahdiye Investigation of electrophoretic parameters of TiO2 nanoparticles for fabricating photoanode of dye sensitized solar cells [ Vol.9, Issue 1 - Autumn Year 1397]
  • Samadi.Farzad The effect of titanium interlayer on the mechanical and structural properties of steel- tungsten diffusion bonding [ Vol.8, Issue 2 - Winter Year 1396]
  • samadipour.azam Synthesis of Microspheres Cr2O3/C by Changing the Synthesis’ Parameters and Evaluation of Electrochemical Properties of Microspheres [ Vol.8, Issue 2 - Winter Year 1396]
  • Santehbes.Santehbes [ Vol.4, Issue 1 - Spring Year 1392]
  • Santehbes.Santehbes [ Vol.1, Issue 2 - Winter Year 1389]
  • Santehbes.Santehbes [ Vol.4, Issue 2 - Summer Year 1392]
  • Santehbes.Santehbes [ Vol.3, Issue 2 - Summer Year 1391]
  • sazegaran.hamid Effects of Alumina Particles and Carbon Monoxide Gas Bubbles Within the Melt on the Graphite Morphology and Microstructure of Gray Cast Iron [ Vol.6, Issue 2 - Winter Year 1394]
  • sazegaran.hamid [ Vol.5, Issue 4 - Summer Year 1394]
  • Sedehi.Sayyed Mohammadreza A Review of the Most Important Methods for Severe Plastic Deformation of Titanium [ Vol.14, Issue 2 - Summer Year 1402]
  • seifolahzade.ali Determination of the Effects of Milling Atmosphere on the Production Process and Characteristics of Boron Nanopowders [ Vol.6, Issue 3 - Summer Year 1395]
  • sepahvand.ameneh [ Vol.1, Issue 2 - Winter Year 1389]
  • Seyedein.S. H. Chemical and mineralogical characterization of Kahnuj ilmenite concentrate and investigation of its reduction behavior in pure hydrogen gas [ Vol.14, Issue 1 - Spring Year 1402]
  • Shaban Ghazani.Mehdi Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP) [ Vol.6, Issue 2 - Winter Year 1394]
  • Shaban Ghazani.Mehdi Application of the combination of extrusion and equal channel angular pressing for processing fine grained and nanostructured metallic materials [ Vol.10, Issue 4 - Winter Year 1398]
  • Shabgard.Mohamad Reza [ Vol.2, Issue 1 - Spring Year 1390]
  • Shabgard.Mohamad Reza [ Vol.2, Issue 4 - Winter Year 1390]
  • Shafie.Mohammad esmaeil Investigation of wear properties of Al6061 alloy and composite containing CNT produced by mechanical alloying and hot pressing process [ Vol.9, Issue 1 - Autumn Year 1397]
  • Shafiee.Bahman Chemical reduction synthesis of copper nanoparticles in aqueous media in present of maleic acid and polyvinylpyrrolidone (PVP) [ Vol.8, Issue 1 - Autumn Year 1396]
  • Shafieian.Zahra Applying Titania and Hydroxyapatite coating on Ti-6Al-4V by PEO and hydrothermal processes and investigating its corrosion behavior in simulated body environment [ Vol.1, Issue 1 - Autumn Year 1389]
  • Shafizadeh.Hamid [ Vol.2, Issue 4 - Winter Year 1390]
  • Shafyei.Ali Study of Phase Transformation in Martensitic Stainless Steel AISI 422 During Continuous Cooling [ Vol.6, Issue 2 - Winter Year 1394]
  • Shafyei.Ali [ Vol.5, Issue 4 - Summer Year 1394]
  • Shafyei.Ali [ Vol.5, Issue 2 - Winter Year 1393]
  • Shahbaz.Amirhosein The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method [ Vol.14, Issue 2 - Summer Year 1402]
  • Shahdadi.Hamid [ Vol.2, Issue 4 - Winter Year 1390]
  • shahedi asl.mehdi Evaluation of Milling Time and Balls Diameters during Surface Mechanical Coating (SMC) in the Presence of Copper Powder and Nickel Balls [ Vol.7, Issue 3 - Spring Year 1396]
  • Shahedi Asl.Mehdi Study of Mechanical and Thermal Properties of NBR/PP-Nano Clay Composite [ Vol.8, Issue 3 - Spring Year 1397]
  • Shahnazari.Zahra Synthesis and characterization of tissue engineering network scaffold composed of polycaprolactone diol / polyethyleneglycol / hydroxyapatite [ Vol.10, Issue 3 - Autumn Year 1398]
  • shahraki.aziz Hydration Resistance Improvement of MgO-CaO Refractories by the Addition of Nano-ZrO2 [ Vol.7, Issue 4 - Summer Year 1396]
  • Shahraki.Mehdi Synthesis and Characterization of Nanoparticles of Magnesium-Copper Oxide with Paramagnetic Properties [ Vol.8, Issue 2 - Winter Year 1396]
  • Shahriari Nogorani.Farhad Modification of the surface morphology of atmospheric plasma sprayed tungsten coating for X-ray tube application [ Vol.8, Issue 4 - Summer Year 1397]
  • shakarami.kiyan [ Vol.2, Issue 2 - Summer Year 1390]
  • shakarami.kiyan [ Vol.2, Issue 1 - Spring Year 1390]
  • Shamanian.Morteza Influence of filler metal on the microstructure of dissimilar welds between UNS S32205 duplex stainless steel and ASTM A517 Quench and tempered steel [ Vol.8, Issue 2 - Winter Year 1396]
  • shamsi.Asghar Experimental study of forming Parts with central blister by Incremental forming process with positive-negative forming pattern [ Vol.10, Issue 4 - Winter Year 1398]
  • shamsi.fariba Modeling the hot deformation flow curves of API X65 pipeline steel using the exponential law equation [ Vol.6, Issue 3 - Summer Year 1395]
  • shamsyan.Meysam [ Vol.5, Issue 3 - Spring Year 1394]
  • Sharafi.Sakineh [ Vol.4, Issue 2 - Summer Year 1392]
  • shariat.mohammadhossein Optimization of parameters for tape casting of yttria stabilized zirconia (YSZ8) by Taguchi design for electrolyte solid oxide fuel cell [ Vol.7, Issue 4 - Summer Year 1396]
  • sharifi.ghorbanali Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation [ Vol.6, Issue 2 - Winter Year 1394]
  • Shayanzadeh Moghadam.Tahereh Synthesis of barium carbonate by mechanochemical method [ Vol.13, Issue 2 - Summer Year 1401]
  • Sheybani Tezerji.Kazem Aluminothermic Reduction of Khatoon Abad Molybdenum Trioxide in Microwave: Investigation on the Effect of Aluminum Particle Size and Scale-up on the Reduction Process [ Vol.11, Issue 2 - Summer Year 1399]
  • Shirani.Hassan Synthesizing and investigation on the electrochemical behavior of (Nd0.9La0.1)1.95Sr0.05Ni0.75Cu0.25O4-d and (Nd0.9La0.1)1.9Sr0.1Ni0.75Cu0.25O4-d cathode electrode for solid oxide fuel cell [ Vol.9, Issue 1 - Autumn Year 1397]
  • Shirazi.Mehrnaz The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [ Vol.6, Issue 1 - Autumn Year 1394]
  • shirdel.kheironesa [ Vol.5, Issue 4 - Summer Year 1394]
  • shirvani.mohamad [ Vol.2, Issue 1 - Spring Year 1390]
  • Shishesaz.Mohammad The Effect of Fiber Breakage Caused by Transient Shear Stress Distribution in Single-Lap Adhesive Joint Composite Material [ Vol.6, Issue 1 - Autumn Year 1394]
  • Shojaee.Taghi [ Vol.5, Issue 4 - Summer Year 1394]
  • Shokrgozar mojarad.Bahareh Investigation onthe effect of both Content and Type of Carbon on Low Temperature Synthesis of SiC by Using Magnesiothermal Reduction Process [ Vol.5, Issue 1 - Autumn Year 1393]
  • Shyegh.Behrooz [ Vol.5, Issue 3 - Spring Year 1394]
  • Shyegh.Behrooz Synthesis of Microspheres Cr2O3/C by Changing the Synthesis’ Parameters and Evaluation of Electrochemical Properties of Microspheres [ Vol.8, Issue 2 - Winter Year 1396]
  • Sohrabinasab.Lida [ Vol.2, Issue 1 - Spring Year 1390]
  • soleimani gilakjani.reza [ Vol.5, Issue 3 - Spring Year 1394]
  • Soleimani.Fatemeh Effect of TiC and TiB2 Reinforcement Phase Addition on Mechanical and Tribological Properties of NiAl-TiC-TiB2 Composite Produced Through Combustion Synthesis Process [ Vol.12, Issue 2 - Summer Year 1400]
  • Soleymani.Farzad Comparison of properties of zinc, zinc/nickel, zinc/nickel/manganese phosphate coatings on 41Cr4 steel substrate [ Vol.14, Issue 3 - Autumn Year 1402]
  • Solimani.Nader [ Vol.3, Issue 1 - Spring Year 1391]
  • Soltani Dehnavi.Akbar Investigating on effect of heat treatment on microstructure and metallurgical properties of three layers explosively bonded Cu/Al/Cu plates [ Vol.8, Issue 2 - Winter Year 1396]
  • Soltani nezhad.Mansour [ Vol.1, Issue 2 - Winter Year 1389]
  • Soltani.Amir Reza [ Vol.5, Issue 1 - Autumn Year 1393]
  • Soltani.Amir Reza [ Vol.5, Issue 3 - Spring Year 1394]
  • soltani.mohamad sadegh Fabrication, Structural Characterization and Magnetic Properties of Nanostructure Fe-Co-W Coatings Prepared by Electrodeposition [ Vol.7, Issue 1 - Autumn Year 1395]
  • Soltani.Mohammad Reza [ Vol.5, Issue 1 - Autumn Year 1393]
  • Soltanieh.Mansour The application of combustion synthesis reactions in Ni-Ti system in the joining of steel to tungsten carbide [ Vol.11, Issue 3 - Autumn Year 1399]
  • Soltanieh.Mansour Effect of TiC and TiB2 Reinforcement Phase Addition on Mechanical and Tribological Properties of NiAl-TiC-TiB2 Composite Produced Through Combustion Synthesis Process [ Vol.12, Issue 2 - Summer Year 1400]

T

  • tabasi.maryam An Experimental and Simulational Investigation on Schiff-base Complex of Cobalt and Corresponding Ligand as Corrosion Inhibitor in Acidic Solution [ Vol.5, Issue 1 - Autumn Year 1393]
  • Tabrizi.Sepide [ Vol.5, Issue 2 - Winter Year 1393]
  • Tabrizi.Sepide The Effect of Annealing Temperature on The Structure and Corrosion Behavior of Nano-Quasicrystalline Al72Ni13Cr15 alloy Synthesized by Mechanical Alloying [ Vol.6, Issue 1 - Autumn Year 1394]
  • Tabrizian.Parinaz Investigating the Rheological Behavior of Silicon Carbide Gel Casting Suspensions and its Effect on the Silicon Carbide Bodies [ Vol.10, Issue 1 - Spring Year 1398]
  • Tadayonsaidi.Mehran Application of the response surface method in optimizing the thickness and hardness of vanadium carbide coatings created by the electrolytic plasma method [ Vol.9, Issue 2 - Winter Year 1397]
  • Tafakh.sahereh Deposition, Characterization and Investigation of Photo-Electrical Properties of Nanostructured Thin Film Mg Doped ZnO by Sol-Gel Method [ Vol.11, Issue 2 - Summer Year 1399]
  • taghizade.zahra [ Vol.4, Issue 1 - Spring Year 1392]
  • taghizade.zahra The performance of self-assembled thin film of imidazole used in organic-inorganic hybrid coating on ‎corrosion inhibition of carbon steel in acidic solution [ Vol.6, Issue 4 - Spring Year 1395]
  • Taghvaei.Amir Hossein Effect of PCA addition on microstructural and magnetic Properties a new Fe-based amorphous alloy prepared by Mechanical Alloying [ Vol.9, Issue 2 - Winter Year 1397]
  • Taghvaei.Amir Hossein Effect of milling time and investigation of thermodynamic analysis on amorphous phase formation in Fe-C-Ta alloy prepared by mechanical alloying [ Vol.8, Issue 3 - Spring Year 1397]
  • tahanpesar.elham Stabilization of Doxorubicin Drug on Graphene Oxide Nanosystem and Computer simulation Study (In-Silico) on Topoisomerase II Enzyme [ Vol.15, Issue 1 - Spring Year 1403]
  • taheri.marziyeh [ Vol.4, Issue 2 - Summer Year 1392]
  • TAHERKHANI.MOHAMMAD [ Vol.2, Issue 4 - Winter Year 1390]
  • Tajabadi.Hossein Enhancement of Local Corrosion Resistance of CP-Titanium in H2SO4 Solution via Plasma Electrolytic Oxidation [ Vol.6, Issue 2 - Winter Year 1394]
  • Tajally.Mohammad Investigation of microstructure and wear resistance of AZ31B/SiO2/graphite hybrid surface composite produced by friction stir processing (FSP) [ Vol.10, Issue 3 - Autumn Year 1398]
  • Tajally.Mohammad Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method [ Vol.10, Issue 2 - Summer Year 1398]
  • Tajbakhsh.Morteza [ Vol.5, Issue 3 - Spring Year 1394]
  • Tajbakhsh.Morteza Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties [ Vol.6, Issue 1 - Autumn Year 1394]
  • Tajbakhsh.Parisa Mechanical and Corrosion Properties of Graphene Oxide-Copper Nano-composites produced by the accumulative Roll Bonding (ARB) method [ Vol.11, Issue 1 - Spring Year 1399]
  • Takbiri.Mohammadjavad Assessment of Aging Cycle for Coupering Its Aluminum Composite Foams with (A356-4% Cu) and A356 Foam Mechanical Behavior [ Vol.6, Issue 1 - Autumn Year 1394]
  • taleshi.Yadollah [ Vol.2, Issue 1 - Spring Year 1390]
  • Tarahomnejad.Mohammad Ali Investigating the Effects of Heat Input on Corrosion Rate of Joint of Duplex Stainless Steel 2205 Weldments by GTAW Process [ Vol.5, Issue 1 - Autumn Year 1393]
  • Tavakkoli.Haman Synthesis, Characterization and investigation of removal process of methylene blue dye by perovskite-type oxides nanoparticles La0.9Sr0.1FeO3 [ Vol.10, Issue 1 - Spring Year 1398]
  • Tavakoli.Hossein Application of the response surface method to optimize the chemical composition and hardness of the aluminum oxide coating created by the electrolytic plasma method [ Vol.10, Issue 2 - Summer Year 1398]
  • tavassoli.soheil The Study of the Effects Intermetallic Phases Formation on the Bond Strength and Electrical Resistivity of Al/Cu Bimetal produced by Compound Static Casting [ Vol.7, Issue 3 - Spring Year 1396]
  • Tayebifard.Ali Synthesis of MoSi2-20%TiC Nanocomposite by Method Mechanical Activated Self-Propagation Combustion Synthesis (MASHS) [ Vol.7, Issue 1 - Autumn Year 1395]
  • Tohidi.Maryam Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [ Vol.10, Issue 2 - Summer Year 1398]
  • toofan.samin synthesis and investigation of solid electrolyte ion conducting lithium aluminium titanium phosphate [ Vol.10, Issue 2 - Summer Year 1398]
  • toorani.heidar Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy [ Vol.10, Issue 2 - Summer Year 1398]

V

  • Vadi.Mehdi Efficient Removal of Omeprazole from Water Samples by Utilizing of Carbon Nanotubes as Powerful nanoadsorbent and Comprising with Graphite: Kinetic and Thermodynamic studies [ Vol.12, Issue 4 - Winter Year 1400]
  • Vaez.ahmad A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [ Vol.14, Issue 3 - Autumn Year 1402]
  • Vafa.Ehsan A new method for the green synthesis of Fe3O4 nanoparticles using Alliaceae plant extract and investigating their properties [ Vol.14, Issue 3 - Autumn Year 1402]
  • Vahedi.Samaneh Synthesis of nickel-cobalt-aluminum/graphene nanocomposite and its electrochemical performance as supercapacitor [ Vol.11, Issue 4 - Winter Year 1399]
  • Vahidshad.Yaser An Investigation of different parameters on the penetration depth and welding width of Ti-6Al-4V alloy by plasma arc welding [ Vol.10, Issue 4 - Winter Year 1398]
  • vajd.akbar Microstructure and Mechanical Properties of Plain Low Carbon Steel Processed by Integrated Extrusion and Equal Channel Angular Pressing (Ex-ECAP) [ Vol.6, Issue 2 - Winter Year 1394]
  • vajd.akbar Microstructural Grading of Al-11 wt.%Mg2Si Hypoeutectic Alloy by Centrifugal Casting [ Vol.1, Issue 1 - Autumn Year 1389]
  • Vanaki.Taha [ Vol.4, Issue 2 - Summer Year 1392]
  • Vatani.Maryam [ Vol.2, Issue 2 - Summer Year 1390]

W

  • Welham.Nicholas J. A review on the extraction of lithium from its minerals - Case study: Lithium extraction from spodumene concentrate using sulfation roasting under ball milling conditions [ Vol.11, Issue 2 - Summer Year 1399]

Y

  • YAGHTIN.AMIRHOSSEIN Investigating the Cyclic Oxidation and Hot Corrosion of Nanostructured CoNiCrAlYSi Coatings Applied by HVOF Process [ Vol.6, Issue 1 - Autumn Year 1394]
  • yarali.davood Synthesis of copper-tin metal oxide nanoparticles by the electrical explosion wire method and investigation antibacterial properties [ Vol.8, Issue 4 - Summer Year 1397]
  • Yazdizade Khalili.Abbas Investigation of abnormal effect of dual-phase ferritic-bainitic microstructures on modification of mechanical properties of MO40 low alloy steel in comparison with full bainitic conditions [ Vol.10, Issue 3 - Autumn Year 1398]
  • Yeganeh.Mahdi THE EFFECT OF MICROSTRUCTURAL CHANGES ON THE CORROSION PROPERTIES OF 310S AUSTENITIC STAINLESS STEEL AFTER THERMOMECHANICAL TREATMENT [ Vol.13, Issue 1 - Spring Year 1401]
  • yousefi.khadije Optimization of physical and mechanical properties of calcium silicate nanocomposite by Taguchi method [ Vol.11, Issue 1 - Spring Year 1399]

Z

  • zaarei.davood Evaluation of anti-corrosion properties of MIO pigments in the formulation of synthetic rubber based primer used in gas pipeline [ Vol.8, Issue 1 - Autumn Year 1396]
  • Zaeimi.Shadi [ Vol.1, Issue 2 - Winter Year 1389]
  • Zahmatkeshani.Fatemeh Novel Synthesis of Pure and Zinc-doped Tin Dioxide by using Urea-based Solvent [ Vol.10, Issue 2 - Summer Year 1398]
  • Zakerhaghighi.H Investigation of the effect of orthotropic parameters in failure of orthotropic materials under the rolling contact [ Vol.10, Issue 3 - Autumn Year 1398]
  • Zakeri.Ahmad Investigation on the Effects of Using Salt Water Bathroom Quenching on the Corrosion Behavior of Hadfield Manganese Steel [ Vol.6, Issue 3 - Summer Year 1395]
  • Zakeri.Ahmad An investigation on the effects of interpass temperature on corrosion behavior of weld metal of Hadfield high carbon steel weld joint [ Vol.8, Issue 1 - Autumn Year 1396]
  • Zakeri.Ahmad Investigation on Effect of Aluminum on the Corrosion Resistance of Hadfield Austenitic Manganese Steel [ Vol.7, Issue 3 - Spring Year 1396]
  • zamani.ali [ Vol.2, Issue 4 - Winter Year 1390]
  • zamani.ali [ Vol.2, Issue 3 - Autumn Year 1390]
  • Zamani.Cyrus Synthesis and Characterization of Activated Carbon from Rice husk [ Vol.11, Issue 2 - Summer Year 1399]
  • Zamani.Reza Investigation on the effects of the amount and source of carbon on synthesis of Ti2AlC nanostructure by self-propagating high temperature combustion synthesis method [ Vol.8, Issue 1 - Autumn Year 1396]
  • Zandrahimi.Morteza Production of Open Cell Copper Foam and assessment of foam Substructure [ Vol.8, Issue 3 - Spring Year 1397]
  • Zangeneh.Shahab Analysis of Hydrogen-Induced Cracking and Lamination in a Pipeline Steel Based on Fitness-For-Service Assessment [ Vol.13, Issue 2 - Summer Year 1401]
  • zarchi.meysam [ Vol.4, Issue 2 - Summer Year 1392]
  • Zare Dehnov.Fatemeh Synthesis of porous hydroxyapatite nano particles via sol-gel route by using different organic polymers [ Vol.11, Issue 3 - Autumn Year 1399]
  • Zare Neyrizi.Hassan Optimization of Photocatalytic Degradation of Cephalexin Drug Contaminant from Aqueous Solutions by Synthesized Zn-MOC Nanostructures Using Response Surface Methodology [ Vol.12, Issue 1 - Spring Year 1400]
  • Zare.Mehran Effect of nano Si3N4، Al2O3 و AlMg and cold rolling process on the microstructural and mechanical properties of AL-6061alloy [ Vol.10, Issue 1 - Spring Year 1398]
  • zarei.hamed protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy [ Vol.10, Issue 2 - Summer Year 1398]
  • zarei.omid protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy [ Vol.10, Issue 2 - Summer Year 1398]
  • Zareiinejad.Sara Preparation and evaluation of mechanical behavior of nanostructure Ni-P/Al2O3-SiC composite coating [ Vol.11, Issue 1 - Spring Year 1399]
  • Zareinezhad.Reza synthesis and Identification of superparamagnetic graphene oxide- Iron oxide nanoparticles coated by chitosan and modified by Amino acid [ Vol.9, Issue 2 - Winter Year 1397]
  • Zarenezhad.Hamaneh Effect of Chlorine in Perovskite Layers Morphology and Efficiency of Perovskite Solar Cells in One step & Spin-Dip Deposition Methods [ Vol.9, Issue 2 - Winter Year 1397]
  • zarghani.fateme Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy [ Vol.8, Issue 4 - Summer Year 1397]
  • zarghani.fateme protrusion friction stir spot welding: the microstructure and mechanical properties of Al 6061 alloy [ Vol.10, Issue 2 - Summer Year 1398]
  • Zebarjad.Seyed Mojtaba The effect of carbon nano tubes on the compressive strength and flexural of epoxy honeycomb sandwich panels [ Vol.10, Issue 1 - Spring Year 1398]
  • Zebarjad.Seyed Mojtaba The effects of TiO2 nanoparticles on physical and thermal properties of polyurethane foam and sandwich panel [ Vol.8, Issue 1 - Autumn Year 1396]
  • Zebarjad.Seyed Mojtaba [ Vol.3, Issue 1 - Spring Year 1391]
  • Zebarjad.Seyed Mojtaba Investigation and Simulation of Quasi-Static Perforation Test on Sandwich Panels with Al A356/SiCp Composite Foam Core [ Vol.6, Issue 2 - Winter Year 1394]
  • Zebarjad.Seyed Mojtaba Investigating the simultaneous role of clay nanoparticles and strain rate on the tensile behavior of polyethylene matrix nanocomposite [ Vol.13, Issue 4 - Winter Year 1401]
  • Zebarjad.Seyed Mojtaba Enzyme absorption rate of sandwich panels with aluminum foam core under the sky of drilling [ Vol.3, Issue 4 - Winter Year 1391]
  • Zebarjad.Seyed Mojtaba [ Vol.5, Issue 1 - Autumn Year 1393]
  • Zebarjad.Seyed Mojtaba [ Vol.5, Issue 3 - Spring Year 1394]
  • Zebarjad.Seyed Mojtaba Microstructure Evaluation of Al Nanocomposite Foam Reinforced with SiO2 Nanoparticles Produced using Ultrasonic Technique [ Vol.4, Issue 6 - Summer Year 1393]
  • Zebarjad.Seyed Mojtaba Characterization of Silica Nanoparticles and Nanocolloid Synthesized in Acidic and Alkaline Media [ Vol.12, Issue 1 - Spring Year 1400]
  • Zebarjad.Seyed Mojtaba [ Vol.3, Issue 3 - Autumn Year 1391]
  • Zebarjad.Seyed Mojtaba An investigation on the effect of adhesive bonding strength on bending behavior of sandwich panels with Al A356/SiCp composite foam core [ Vol.7, Issue 3 - Spring Year 1396]
  • Zebarjad.Seyed Mojtaba Investigation of Role of both Nucleating Agent and Plasticizer on Physical, Mechanical and Thermal Properties of Poly(Lactic Acid) [ Vol.6, Issue 1 - Autumn Year 1394]
  • Zebarjad.Seyed Mojtaba [ Vol.4, Issue 2 - Summer Year 1392]
  • ZEBARJADI ASHTI.ARASH [ Vol.2, Issue 4 - Winter Year 1390]
  • zeynolabedintabar.MORTEZA Improvement in Mechanical Properties of Medical Stainless Steels by Using Liquid-Phase Sintering [ Vol.6, Issue 1 - Autumn Year 1394]
  • Ziraki.Sahar Investigating the Effect of Co-Precipitation Synthesis Time of LiNi0.8Co0.15Al0.05O2 Cathode and Its Structural and Electrochemical Evaluation in Lithium-ion Battery [ Vol.13, Issue 1 - Spring Year 1401]

The rights to this website are owned by the Raimag Press Management System.
Copyright © 2021-2024

Home| Login| About Us| Contact Us|
[فارسی] [العربية] [fa] [ar]