List of Articles analysis

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Novel Aspect of Composite Sandwich Fairing Structure Optimization of a Two Stages Launch Vehicle by Using MDO Independent Subspace Approach
  Foozie Morovat Jafar Roshanian Ali Mozaffari Hadi Zaare
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires
  Moslem Namjoo Hossein Golbakhshi Farhad Khoshnam Ahmad Soleimani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Nonlinear Vibration Analysis of FG Nano-Beams in Thermal Environment and Resting on Nonlinear Foundation based on Nonlocal and Strain-Inertia Gradient Theory
  Ebrahim Mahmoudpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Sensitivity Analysis for Optimal Design of Multibody Systems with Clearance Joint
  Saeed Ebrahimi Esmaeil Salahshoor Saeed Nouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Stress and Displacement Analysis of First Molar Hollow Tooth during Dental Filling Operation using Three-Dimensional Finite Element Method
  M. R. Karamooz-Ravari B. Shahriari E. Seyfali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Vibration Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism
  Mehran Mahboubkhah Sajjad Pakzad Morteza Homayoun Sadeghi Mir Mohammad Ettefagh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Mechanical Design and Simulation of a Saddle-Assistive Device for Sit-to-Stand Transfer in Healthy Subjects
  A. Hojjati Najafabadi S. Amini F. Farahmand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Vibration Analysis of a Multi-disk, Bearing and Mass Unbalance Rotor Using Assumed Modes Method
  R. Norouzi M. Rafeeyan H. Dalayeli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification
  R. Barzegar M. Mahboubkhah V. Zakeri R. Matin H. Hosseingholi Pourasl F. Abdollahzadeh Bina
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Time-Dependent Reliability Analysis of Mechanical Structures using an Analytical Approach
  Mohammad Reza Moarefzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Characterization of Stress Concentration in Thin Cylindrical Shells with Rectangular Cutout Under Axial Pressure
  O. Sam Daliri M. Farahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN)
  Mohammad Ali Ansari Reza Abdi Behnagh Dong Lin Sarang Kazeminia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Workspace Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism
  Mehran Mahboubkhah Sajjad Pakzad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Accuracy Improvement of Upper Bound Analysis of Bimetallic Rods Extrusion Using a New Velocity Field
  Hamed Afrasiab Mojtaba Qasemi-Mahallekolaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Experimental Investigation on Fatigue Evaluation of Orthopaedic Locking Compression Plate
  Saenoddin Mohajerzadeh Khalil Farhangdoost Pedram Zamani Kamal Kolasangiani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Application of Topology Optimization in Design of Stem Profile in Hip Implants Using Finite Element Method
  Mohammad Reza Niroomand Farzad Boroomand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Investigating the Reason for Compressor Gearbox Gear Failure in Arfa Iron and Steel Company using Analytical and Fracture Studies
  Mahdi Ebrahimzadeh Ali Galehdari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Steady State Creep Characteristics of a Ferritic Steel at Elevated Temperature: An Experimental and Numerical Study
  Roozbeh Alipour Ali Farokhi Nejad Hamid Nilsaz Dezfouli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Modal Analysis of Complex Structures via a Sub-Structuring Approach
  Vahid Heydari Mohammd Ahmadi Balootaki Mohammad Orak Mehdi Salehi
  10.30495/admt.2021.1896878.1187
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Multi-Objective Optimization of Loading Paths for Double-Layered Tube Hydroforming using Finite Element Analysis
  Hamed Ebrahimi Keshmarzi Ramin Hashemi Reza Madoliat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Numerical simulation of multilayer cellular scaffolds with 3D and 1D elements
  Hamid Reza khanaki Sadegh Rahmati Mohammad Nikkhoo Mohammad Haghpanahi Javad Akbari
  10.30495/admt.2020.1905314.1207
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Vibration Suppression of Grass Trimmer Handle using Tunable Vibration Absorber
  Sushil Sahebrao Patil
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Determination of Material Properties Components used in FEM Modeling of Ultrasonic Piezoelectric Transducer
  Abbas Pak
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Sensitivity Analysis of Piezoelectric Microcantilever Excitability as Resonator
  Reza Ghaderi
  10.30486/admt.2023.1971736.1389
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Analysis of the Dynamic Forces of 3D Printer with 4 Degrees of Freedom
  sajjad pakzad ebrahim imani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone
  Sayed Alireza Hashemi Saeid Esmaeili Mazyar Ghadirinejad Saeed Saber-Samandari Erfan Sheikhbahaei Alireza Kordjamshidi Amirsalar Khandan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Influences of Blank Holder Force in The Multi-Step Deep Drawing Process of Aluminum Sheets
  Sajad Bakhtiari Seyed Jalal Hashemi Amir Hossein Roohi
  10.30495/admt.2020.1880364.1147
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Investigation on Failure Loads and Failure Modes for Two Parallel Pin-Loaded Holes Made from Unidirectional Glass-Epoxy Nanoclay Laminates
  sajjad dehghanpour keivan hosseini safari Farzan Barati Mohammadmahdi Attar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Design of Structure for a Heavy Duty Mineral Tow Machine by Evaluating the Dynamic and Static Loads
  Mehdi Akhondizadeh Meysam Atashafrooz
  10.30486/admt.2023.1962820.1365
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Analytical and Numerical Study of Pre-Stress Effect in Piezoelectric Sandwich Type Ultrasonic Transducer
  Hamidreza Nadri Mahdi Shaban Abbas Pak
  10.30495/admt.2021.1904847.1204
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Design and Analysis of Bicycle Helmet Made of PETg and ABS with Honeycomb Structure Against External Impacts using Abaqus Software
  sajjad pakzad ahad shah hoseini Maryam Dehghani amir bahador khalkhali
  10.30495/admt.2021.1896746.1185
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Design an Adaptive Sliding Mode Controller for a Class of Underactuated Systems
  Hossein Moeinkhah Mohammad Ahmadi Balootaki
  10.30495/admt.2021.1898210.1194
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Fabrication, Testing and Analysis of Composite Lattice Panels Under Three-Point Bending Load
  Mahdi Farhadi Ali Davar Mohsen Heydari Beni Jafar Eskandari Jam
  10.30486/admt.2021.1908801.1217
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Attitude Tracking Control of Autonomous Helicopter using Polytopic-LPV Modeling and PCA-Parameter Set Mapping
  Reza Tarighi Amir Hooshang Mazinan Mohammad Hosein Kazemi
  10.30495/admt.2021.1910292.1219
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - The Application of the Extended Isogeometric Analysis (XIGA) with K-Refinement Approach for the Prediction of Fatigue Life in Linear Elastic Fracture Mechanic
  Ata Fardaghaie Shahram Shahrooi Mohammad Shishehsaz
  10.30486/admt.2021.1927025.1271
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Topological Optimization of Brake Pedal for Metal Additive Manufacturing: A Case Study
  Batuhan Izgi Meltem Eryildiz Mirigül Altan
  10.30495/admt.2021.1931105.1285
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Numerical Investigation of the Grid Geometry Effect on the Modal Response and Buckling of Grid-Stiffened Composite Conical Structure
  Mohammad Reza Zamani Mohsen Zaretabar Hossein Parsa Mohsen Heydari Beni
  10.30495/admt.2021.1921748.1245
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Vibration Analysis and Sensitivity Analysis of Semi-Submerged Multilayer Piezoelectric Microcantilever
  Mohamadreza Khosravi Reza Ghaderi
  10.30495/admt.2021.1923900.1254
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Different Geometry Design Structures of Tissue Scaffolds for Additive Manufacturing
  amirhossein Ehsani sadegh rahmati Mohammad Nikkhoo Shahram Etemadi Haghighi Mohammad Haghpanahi
  10.30495/admt.2021.1936526.1298
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Effect of CaCO3 Nanoparticles on Vibrational Damping Behavior and Static Mechanical Properties of Polypropylene Composite Plates: An Experimental Investigation
  Mahdi Rahmani Armen Adamian Ahmad Hosseini-Sianaki
  10.30486/admt.2022.1933897.1292
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Numerical Motion Analyzing Based on Recorded Empirical Data by Smartphone Features
  Bahador Abolpour Yaser Taghipour
  10.30486/ADMT.1403.873723
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Dimensional and Geometrical Tolerance Analysis of Two Flexible Curved Sheet Metal Parts Assembly
  Parisa Omidvar Maryam Saryazdi
  10.30486/admt.2022.1934277.1295
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Vibration Analysis of an Imperfect Single-Layer Graphene Sheet using Quasi-3d Theory and Isogeometric Approach
  Heidar Fazeli Armen Adamian Ahmad Hosseini-Sianaki
  10.30486/admt.2022.1951472.1338
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Analysis and Control of Chaos in Nonlinear Gear System using Predictive Sliding Mode Control
  Nima Valadbeigi Seyed Mahdi Abtahi
  10.30486/admt.2022.1949735.1333
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Investigation of Pressure Distribution on Slippers of a Monorail Sled with Vibration Damper
  Mohammad Reza Najafi Saied Mahjoub Moghadas
  10.30495/admt.2022.1949929.1334
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Evaluation of Critical Buckling Load in FG Plate using Analytical and Finite Elements Methods
  Hossein Ahmadi Rashid AMIR GHIASVAND Maziar Mahdipour Jalilian Mahdi Kazemi
  10.30486/admt.2022.1904716.1203
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - A Quasi-Analytical Method Algorithm Development in Redesigning the Geometry and Structural Analysis of An Aircraft Propeller and Comparing with the Finite Element Method
  Behrooz Shahriari Hassan Izanlo Nedasadat  Seddighi
  10.30486/ADMT.1403.873792
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Tolerance Geometrical Interference Analysis of Specific Movement Mechanism Under Thermal Strain
  Ali Lashkari Zadeh Seyed Yousef Ahmadi-Brooghani Mojtaba Sheikhi Azqandi
  10.30486/ADMT.2024.873798