List of Articles Rolling

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Virtual Security Management of Internet Banking Service and its Effect on Absorption of Tejarat Bank Customers
  Alireza Talkhabi Ali Shah Hamidreza Hossieni Dana Davood Shabani Saber
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Speculative Bubbles in the Bitcoin Digital Currency Market
  Majid Hatefi Majoomard Omolbanin Jalali Mohammad Rahimi Ghasemabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Evaluating the effective plants’ ability to control gully erosion (Case Study: Konar Takhteh Region, Fars Province, Iran)
  Akbar Farhadi Hasan Ahmadi Baharak Motamedvaziri Abolfazl Moeini
  10.30495/wsrcj.2023.66573.11287
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Identification of hazards and analysis of the root causes of construction accidents using the Bow-tie_FMEA Compound Technique (Case Study: Tehran Technical Building Company)
  Alireza Moradi Fatemeh Razavian Behnaz Moradi Ghiyasabadi
  10.22034/jest.2021.41954.4559
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Application of Taylor's Rule in Iran Economy and Policies influence from Real Estate Market
  Alireza Erfani Smaeil Shamsiyan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Investigation and Comparison of Microstructure and Mechanical Properties Between Parts of Shear Spinning and Rolled
  H Ghayour S. M. J Hoseini A Salemi Golezani M. K Asgarani I Ebrahimzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Simulation of Steel Sheets Cold Rolling in Sticky Friction Conditions to Reduction of Scrap and Tools Wear
  Arab N
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires
  Moslem Namjoo Hossein Golbakhshi Farhad Khoshnam Ahmad Soleimani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Predicting Strip Tearing in Cold Rolling Tandem Mill using Neural Network
  A. Haghani A. R. Khoogar F. Kumarci
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Design and Analysis of Two Pass Rolling Dies
  siva prasad kondapalli VISHNU KANDULA
  10.30486/admt.2023.1959121.1350
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Multi layered finite element analysis of graded coatings in frictional rolling contact
  R. Jahedi S. Adibnazari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Modelling and Control of Mutation Dynamics of the Cancer Cells Employing Chemotherapy
  Hami Tourajizadeh zahra zarandi zakie farbodi ehsan sadeghi
  10.30486/admt.2021.1920220.1240
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Comparison of spiritual intelligence and self-control components in offender and non-offender individuals (Case study: gang member offenders of central prison, the city of Isfahan)
  bahira jalili masoud heidari
  10.30486/jsrp.2018.543235
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - New Method of Determination for Pressure and Shear Frictions in the Ring Rolling Process as Analytical Function
  M.R Zamani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - An Upper Bound Analysis of Sandwich Sheet Rolling Process
  H Haghighat P Saadati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Investigating portfolio performance with higher moment considering entropy and rolling window in banking, insurance, and leasing industries
  Arash Amini Maryam Khalili Araghi Hashem Nikoomaram
  10.22034/amfa.2022.1954904.1720
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Fuzzy Goal Programming Model to Rolling Performance Based Budgeting by Productivity Approach (Case Study: Gas Refiner-ies in Iran)
  Nouraldin Kalantari Rahmatollah Mohammadi Pour Masoud Seidi Ardashir Shiri Masoud Azizkhani
  10.22034/amfa.2018.544952
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Analysis and simulation of temperature distribution on the roller body during the hot rolling process
  Amirheshmat Khedmati Bazkiaei Ali Sozangar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Simulation of thermal stress in the hot rolling process and its effect on roller failure
  Amirheshmat Khedmati Bazkiaei Ali Sozangar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Design and controlling structures by simultaneous use of Tuned Mass Dampers (TMDS) and seismic isolator system
  mohamad ali ghanadian محسن کرامتی محمود نیک خواه
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Investigation of notching HSS rolls with high hardness for hot mill rolling
  امین کلاهدوز محسن جعفری دینانی سید علی افتخاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Designing and Dismounting an Intelligent System of Irrigation Management for Greenhouse based on Delphi Software
  Davood mohammadi pirmorad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Design and Simulation of Adaptive Neuro Fuzzy Inference Based Controller for Chaotic Lorenz System.
  Mehran Adibzadeh Ahmad Fakharian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Pillow-Shape Base Isolation System and Its Seismic Behavior
  Ali Tayaran Mahmood Hosseini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Derivation of Equation of Motion for the Pillow-Shape Seismic Base Isolation System
  Ali Tayaran Mahmood Hosseini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - The Relationship between Controlling Behaviors and Marital Instability in Female Teachers’ of Kerman Schools
  Ali Pourrajab Mitra Kamyabi
  10.30495/jwsf.2020.562208.1252
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Investigating the effectiveness of the observation of Islamic council in the improvement of performance of Bo nab Municipal
  Babak Rahimian Bahram Sarmast
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - The effectiveness of Short time structured play therapy on attention –deficit Hyperactivity disorder in pre-school children (six years)
  Naeimeh Mohebb Shahrokh Amiri Atefeh Behravesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Analytical and Numerical Evaluation of Wire Flat Rolling Process Based on the Slab Method and DEFORM-3D
  Behzad Pasoudeh Hadi tagimalek
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - The Effect of Cross-Rolling Process on Nanostructure of Al 1050 Alloy
  Mohsen Asadi Asadabad Mohammad Jafari Eskandari Reza Tafrishi Mojtaba Bagherzadeh
  10.22034/jna.2014.02.006
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Analytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force
  Mohammad Heydari Vini Pedram Farhadipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Numerical Simulation of the Effect of Elastic Deformation of work rolls on the rolling force and Comparison with the Results obtained by the Slab Method during the reciprocating cold rolling
  Mohammad Heydari Vini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - A New Temper Rolling Force Model for Dry Thick Strip Considering Fully Elastic Contact
  Pedram Farhadipour Mohammad Heydari Vini Sayed Mohammad Reza Loghmanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process
  Mohammad Honarpisheh Mohammad Reza Aghili Mahdi Kotobi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Using Artificial Neural Networks to Predict Rolling Force and Real Exit Thickness of Steel Strips
  Mohammad Heydari Vini1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - In silico Methods for Modeling of Genomic Regions for Immunological and Metabolic Gene Modulating to Stress Response in Chicken: Where We Are?
  M.S. Ekhtiyari A.S. Sadr M. Shirali A. Javanmard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Dietary Supplementation of Different Forms of Barley Grain in Mohgani Male Lambs Feeding: Impacts on Growth Performance, Nutrient Digestibility, Blood Metabolites, and Carcass Characteristics
  M. Kazemi O. Jangjou H. Saleh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Cold rolling techniques in mechanical splices: Experimental investigations
  mohamad reza shokrzadeh Fariborz Nateghi Allahe taleb sadeghian
  10.30495/ijase.2024.2005050.1087
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Investigating the effects of types of cash flow and controlling shareholders on the relationship between profit management and financial performance to predict financial bankruptcy (firefly algorithm)
  Gurban Heki Behrouz Sadeghi Amroabadi Seyyed Mohammad Reza Davodi
  10.30495/fed.2023.705596
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - The mediating effect of banking system fragility on the relationship between controlling shareholder sensitivity and interest rate divergence
  simin rajizadeh Amirhossein Taebi Noghondari Hadis Zeinali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Impact of applying block chain on controlling, monitoring and enforcement costs in Iran
  maryam Farzanehrafat amir gholami Seyed Mohammad Mehdi Ahmadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - AN IMPROVED CONTROLLED CHAOTIC NEURAL NETWORK FOR PATTERN RECOGNITION
  Maryam Nahvi Farsi Majid Amirfakhrian Alireza Vasiq
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Influence of Cold Rolling and Annealing on Microstructure and Tensile Properties of Hastelloy X Superalloy
  حمید فیض آبادی سید مهدی عباسی مریم مرکباتی رشید مهدوی محمدرضا توکلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Effect of hot rolling and heat treatment on anisotropy properties of Mg alloy LZ71
  Mostafa Pahlavani Javad Marzbanrad Abbas Bayati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - بررسی تاثیر عملیات حرارتی بر خواص ریزساختاری ورق سه لایه آلومینیوم منیزیم- آلومینیوم خالص- فولاد زنگ نزن
  داوود میراحمدی ابوالفضل غلام زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Study of the Notching HSS Rolls by CBN Tool using RSM Method
  محسن جعفری دینانی امین کلاه دوز سید علی افتخاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - بررسی نورد فویل همراه با اعمال اثرات روانسازی
  مینا عرب اف محمود سلیمی محسن اصفهانیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - بررسی تأثیر ضریب اصطکاک بر میزان عیب دم ماهی در فرایند نورد حلقوی گرم
  امیر حسین قیصری محمدرضا فروزان عبدالعلی مراثی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - ارائه مدلی برای پیش بینی سایش غلتک‌های نورد گرم
  امیر نورانی محمود سلیمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - بهینه سازی نورد سرد پیوسته با تغییرات توأم کشش بین قفس های و تنظیمات ضخامت به کمک الگوریتم ژنتیک
  فرشید آقاداوودی حسین گلستانیان نوید نگهبانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - تحلیل عددی و تجربی شکلدهی لوله های مسی مستطیلی بوسیله غلتک‌کاری متوالی لوله مدور پر شده با بیسموت
  علی بصیرت نیا محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - بررسی اثر اصطکاک بر تعریض و برآمدگی جانبی در نورد تخت ‌ به روش المان محدود
  محمود سلیمی امین فضیله
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - بررسی و شبیه‌سازی فرآیند نورد نامتقارن سیم
  علی پرویزی بهزاد پسوده کارن ابری نیا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - استخراج معادله ساختاری قطعه‌کار در نورد گرم ورق
  سحر سلیمی سمیرا سلیمی امیرحسین ادیبی سده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - محاسبه میزان مقاومت غلطشی تایر با استفاده از نتایج تحلیل برهم کنش استاتیکی آن با جاده
  حسین گلبخشی مسلم نامجو
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - A Three-dimensional Deformation Model for Asymmetric Sheet Rolling Process
  H. Rezaei Heshmatollah Haghighat
  https://doi.org/10.60664/jsm.2024.1107148
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Investigation of the effect of orthotropic parameters in failure of orthotropic materials under the rolling contact
  hamed zakerhaghighi saeed adibnazari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Effect of cold rolling process on recovery strain and recovery ratio of Ni50Ti40Hf10 shape memory alloy
  majid belbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Study on microstructure and mechanical properties of API X70 steel at various hot rolling conditions
  محسن ریحانیان Mehdi Rezaei Mostafa Eskandari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - analysis of plastic instability during sandwich sheet rolling
  حامد ثابت شهرام خیر اندیش شمس الدین میر دامادی مسعود گودرزی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Large Eenhancement in Mechanical Properties of Al 2024 Alloy After Single Rolling Pass
  M. میرزایی M. روشن S. جوادپور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Investigation of effective parameters in the sandwich and conventional rolling process of the thin steel sheet using the finite element method
  V. Ali mirzaloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Supervision and Control in Imam Ali’s Management
  h. محمودیان a.m ساجدی t. بیگم فقیهی