Predicting Strip Tearing in Cold Rolling Tandem Mill using Neural Network
Subject Areas : Mechanical EngineeringA. Haghani 1 , A. R. Khoogar 2 , F. Kumarci 3
1 - Department of Mechanics, Faculty of Engineering,
Shahrekord Branch, Islamic Azad University, Shahrekord, Iran
2 - Department of Mechanical Engineering,
Maleke-Ashtar University of Technology, Lavizan, Tehran, Iran
3 - Department of Computers, Faculty of Engineering,
Shahrekord Branch, Islamic Azad University, Shahrekord, Iran
Keywords:
Abstract :
[1] Roberts, W., “Cold Rolling of Steel”, 1st ed., Marcel Dekker, New York, 1978, Chap. 2.
[2] Bagheripoor, M., Bisadi, H., “Application of artificial neural networks for the prediction of roll force and roll torque in hot strip rolling process”, Journal of Applied Mathematical Modelling, Vol. 37, 2013, pp. 4593-4607.
[3] Ghaisari, J., Jannesari, H., and Vatani, M., “Artificial neural network predictors for mechanical properties of cold rolling products”, Journal of Advances in Engineering Software, Vol. 45, 2012, pp. 91-99.
[4] Chen, J., Chandrashekhara, K., Mahimkar, C., Lekakh, S. N., and Richards, V., “Void closure prediction in cold rolling using finite element analysis and neural network”, Journal of Materials Processing Technology, Vol. 211, 2011, pp. 245-255.
[5] Rath, S., Singh, A., Bhaskar, U., Krishna, B., Santra, B., Rai, D., and Neogi, N., “Artificial neural network modeling for prediction of roll force during plate rolling process”, Journal of Materials and Manufacturing Processes, Vol. 25, 2010, pp. 149-153.
[6] Mohanty, I., Datta, S., and Bhattacharjee, D., “Composition–processing–property correlation of cold-rolled IF steel sheets using neural network”, Journal of Materials and Manufacturing Processes, Vol. 24, 2008, pp. 100-105.
[7] Shahani, A., Setayeshi, S., Nodamaie, S., Asadi, M., and Rezaie, S., “Prediction of influence parameters on the hot rolling process using finite element method and neural network”, Journal of Materials Processing Technology, Vol. 209, 2009, pp. 1920-1935.
[8] Peng, Y., Liu, H., and Du, R., “A neural network-based shape control system for cold rolling operations”, Journal of Materials Processing Technology, Vol. 202, 2008, pp. 54-60.
[9] Gudur, P., Dixit, U., “A neural network-assisted finite element analysis of cold flat rolling”, Journal of Engineering Applications of Artificial Intelligence, Vol. 21, 2008, pp. 43-52.
[10] Kim, H., Mahfouf, M., and Yang, Y., “Modelling of hot strip rolling process using a hybrid neural network approach”, Journal of Materials Processing Technology, Vol. 201, 2008, pp. 101-105.
[11] Xie, H., Jiang, Z., Tieu, A., Liu, X., and Wang, G., “Prediction of rolling force using an adaptive neural network model during cold rolling of thin strip”, International Journal of Modern Physics B, Vol. 22, 2008, pp. 5723-5727.
[12] Liang, X.-G., Jia, T., Jiao, Z.-J., Wang, G.-D., and Liu, X.-H, “Application of Neural Network Based on Bayesian Method to Rolling Force Prediction in Cold Rolling Process”, Journal of Iron and Steel Research, Vol. 10, 2008, pp. 1-16.
[13] Zhang, L., Zhang, L., y., Wang, J., and Ma, F., T., “Prediction of rolling load in hot strip mill by innovations feedback neural networks”, Journal of Iron and Steel Research, Vol. 14, 2007, pp. 42-51.
[14] Yang, J., Che, H., Xu, Y., and Dou, F., “Application of adaptable neural networks for rolling force set-up in optimization of rolling schedules”, Journal of Advances in Neural Networks, Vol. 3973, 2006, pp. 864-869.
[15] Kang, G., W., Liu, H., B., “Surface defects inspection of cold rolled strips based on neural network”, IEEE Machine Learning and Cybernetics Conference, Vol. 8, IEEE, Guangzhou, China, 2005, pp. 5034-5037.
[16] Son, J., S., Lee, D., M., Kim, I., S., and Choi, S., G., “A study on on-line learning neural network for prediction for rolling force in hot-rolling mill”, Journal of Materials Processing Technology, Vol. 164, 2005, pp. 1612-1617.
[17] Lee, D., Lee, Y., “Application of neural-network for improving accuracy of roll-force model in hot-rolling mill”, Journal of Control Engineering Practice, Vol. 10, 2002, pp. 473-478.
[18] Frayman, Y., Wang, L., and Wan, C., “Cold rolling mill thickness control using the cascade-correlation neural network”, Journal of Control and Cybernetics, Vol. 31, 2002, pp. 327-342.
[19] Lin, J., “Prediction of rolling force and deformation in three-dimensional cold rolling by using the finite-element method and a neural network”, International Journal of Advanced Manufacturing Technology, Vol. 20, 2002, pp. 799-806.
[20] Quanfeng, S., Jiangang, Z., “Prediction on five-stand cold rolling mill of rolling force by neural network”, Journal of Iron and Steel, Vol. 2, 2002, pp. 1-8.
[21] Gunasekera, J., Jia, Z., Malas, J., Rabelo, L., “Development of a neural network model for a cold rolling process”, Journal of Engineering Applications of Artificial Intelligence, Vol. 11, 1998, pp. 597-603.
[22] Larkiola, J., Myllykoski, P., Korhonen, A., and Cser, L., “The role of neural networks in the optimisation of rolling processes”, Journal of Materials Processing Technology, Vol. 80, 1998, pp. 16-23.
[23] Korczak, P., Dyja, H., and Łabuda, E., “Using neural network models for predicting mechanical properties after hot plate rolling processes”, Journal of Materials Processing Technology, Vol. 80, 1998, pp. 481-486.
[24] Cho, S., Cho, Y., and Yoon, S., “Reliable roll force prediction in cold mill using multiple neural networks”, Journal of IEEE Transactions on Neural Networks, Vol. 8, 1997, pp. 874-882.
[25] Aistleitner, K., Mattersdorfer, L., Haas, W., and Kugi, A., “Neural network for identification of roll eccentricity in rolling mills”, Journal of materials processing technology, Vol. 60, 1996, pp. 387-392.
[26] Haghani, A., “A Study of Damage Evolution in Cold Rolling Tandem Mill”, MSc. Dissertation, Faculty of Mechanics, Azad University, Khomeinishahr Branch, Isfahan, Iran. 2009.
[27] Cichocki, A., Unbehauen, R., Neural Networks for Optimization and Signal Processing, 2nd ed., JOHN WILEY & SONS, New York, 1995, Chap. 3.
