List of Articles Friction Stir Welding

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Advanced Manufacturing Technology by Under Water Friction Stir Welding Technique
  M Sadeghi M Farahani H Sabet
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Effect of the FSW Tool Pin Profile on Mechanical Properties of the Al6061-Cu Plates Joint
  F. khalili K. Amini M. Golzar Shahri F. Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Metallurgical Investigation of Under Water Friction Stir Welding (UWFSW) Process
  M Sadeghi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints
  kamran amini Farhad Gharavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Optimizing Friction Stir Welding Process for Enhancing Strength and Hardness using Taguchi Multi-Objective Function Method
  Sajjad Khaki Ali Heidari Amin Kolahdooz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite
  Moslem Paidar Mojtaba Jafarian Mohsen Salehi Mohammad Saeed Khakpash
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Experimental Study on Manufacturing of Tailor Friction Stir Welded Aluminium Blanks
  Farhad Teimouri Hamid Montazerolghaem Mahmoud Farzin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Influence of Tool Offset Distance on Microstructure and Mechanical Properties of the Dissimilar AA2024–AA7075 Plates Joined by Friction Stir Welding
  Hossain Soleimany kamran amini Farhad Gharavi
  10.30495/admt.2021.1897512.1193
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Experimental Correlation Between Microstructure, Residual Stresses and Mechanical Properties of Friction Stir Welded 2024-T6 Aluminum Alloys
  Majid Farhang Mohammadreza Farahani Mohammad Nazari O. Sam Daliri
  10.30486/admt.2022.1943845.1322
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Reliability-Based Robust Multi-Objective Optimization of Friction Stir Welding Lap Joint AA1100 Plates
  E Sarikhani A Khalkhali
  10.22034/jsm.2019.1877986.1493
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - A Modified Model to Determine Heat Generation in the Friction Stir Welding Process
  A Ghiasvand S Hasanifard M Zehsaz
  10.22034/jsm.2019.1867048.1429
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - CFD Modelling of Friction Stir Welding of Aluminum to Steel butt joint
  Hamed Aghajani Derazkola Majid Elyasi Morteza Hossienzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - The Effect of Friction Stir Processing Speed Ratio on the Microstructure and Mechanical Properties of A 430 Ferritic Stainless Steel
  Ali Salemi Golezani S. M Arab Sh. Javadi Firooz Kargar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Friction Stir Welding of Al 2024 with Al 7075 Alloys and evaluate its structural and mechanical properties
  Sayedeh Zahra Anvari Saeed Rohani Mojarad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Robust Multi-Objective Optimization of Mechanical Properties of Friction Stir Welding Using Neural Network and Modified-NSGA-II
  Mostafa Akbari Hossein Rahimi Asiabaraki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Bimetal friction stir welding of aluminum to magnesium
  P Pourahmad M Abbasi H.A Mehrabi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Dissimilar Friction Stir Welding between Magnesium and Aluminum Alloys
  Mahdi Salari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW
  Ahmad Afsari Shahin Heidari Jaleel Jafari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Experimental Investigation of One-pass and Two-pass Friction Stir Welding Process of Aluminum Alloy 6061 with and without Copper Foil
  Qadarat Mohammad Jassim Al-Issawii Maziar Mahdipour Jalilian Mahdi Karami Khorramabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Manufacturing of Aluminum Thin Cylindrical Parts By Using Friction Stir Welding Method
  Ahmad Reza Sabet Hamid Montazerolghaem
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Friction Stir Welding of Dissimilar Poly Methyl Methacrylate and Polycarbonate Sheets
  Mojtaba Rezaee Hajideh Omid Shapurgan Navid Molla Ramzani Essa Hasan Nejad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Simulation of Tool Rotation and Travelling Speed Effects on Friction Stir Welding of Ti-6Al-4V
  Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Effects of Tool Tilt Angle and Plunge Depth on Properties of Polycarbonate FSW Joint
  Hamidreza Mohammadi Kuhbanani Hesameddin Yasemi Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - A Hybrid Thermal Assisted Friction Stir Welding Approach for PMMA Sheets
  Mojtaba Rezaee Hajideh Mohammadreza Farahani Masoud Ahmad Khanbeigi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Experimental Investigation of the Effect of Using Tools with Tapered Pins in Friction Stir Welding (FSW) of AA6061-T6 Aluminum Alloy
  Saleh Al Khatour Maziar Mahdipour Jalilian Mahdi Karami Khorramabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Effects of alumina nanoparticles, number of stirring pass and rotational speed on the mechanical behavior of friction stir welded (FSW) magnesium alloy (AM60)
  Arash Behzadineghad Abbas mohassel Hamid Omidvar Nader Setoudeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Investigation the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded AZ31 magnesium alloy
  AMIN ABDOLLAHZADEH Ali shokouhfar حمید امیدوار محمد علی صفرخانیان محمدرضا نادری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Similar and dissimilar 5754 and 6063 aluminum alloy joints by friction stir welding
  امین ربیعی زاده احمد افسری فرهاد ارغوانی فرناز احمدی کیسمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Evaluation of Microstructure and Mechanical Properties of Friction Stir Lap Welded 6061 Aluminium Alloy at various welding speeds
  فرهاد غروی ایمان ابراهیم زاده علی سهیلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Investigation of effect of tool geometry on formation of common defects, and mechanical properties of 5456 Aluminum alloy, in Friction Stir Lap Welded process
  MOHAMMADREZA NADERI محمد علی صفرخانیان امیر حسین کوکبی امین عبداله زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Study the microstructure and hardness of FSW of API 70 steel at the presence of TiO2 particles
  Rasoul Pouriamanesh KAMRAN Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Effect of Shoulder Surface Angle of Tool on Joint Properties in Friction Stir Welding of 5052 Aluminium Alloy
  فرهاد غروی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Effect of Tool Rotation Speed on the Mechanical Properties and Corrosion Behavior of Dissimilar Friction Stir Welded of 5083 Aluminium Alloy and Commercially Pure Titanium
  Masoud Shabani بهروز شایق بروجنی رضا ابراهیمی کهریزسنگی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Investigation of Microstructure, Hardness and Intermetallic Compound in Friction stir Welding of AA6065 Aluminum Alloy to Copper
  مجید الیاسی Rahim Narimani Mortza Hosseinzadeh Hamed Aghajani Derazkola
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Friction Stir Welding of Ultrafine-Grained Al 1050: Investigation of Pin Geometry, Welding Atmosphere Temperature and Welding Speeds on the Mechanical Properties
  Morteza Hosseini Habib Danesh-Manesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Effect of Interlayer Type on Mechanical Properties and Microstructure of the 6061 Aluminum Alloy Joint by Friction Stir Welding
  seyed amin kafaei Hamed Sabet Mohsen Ghanbari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Evolution of the Microstructure and Mechanical Properties of Friction Stir Welded Ferrite-Martensite DP700 Dual Phase Steel
  Mahdi Mahmoudiniya Amir Hossein Kokabi Massoud goodarzi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Effect of Friction Stir Welding (FSW) on Corrosion Behavior of Pure Copper in 3.5 % wt NaCl Solution
  amirhossein taheri Arash Fattah-alhosseini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - بررسی اثر سرعت خطی و دورانی ابزار بر روی جریان مواد و تولید حرارت در جوشکاری اصطکاکی اغتشاشی پلی متیل متاکریلات (PMMA)
  حامد آقاجانی درازکلا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - بهینه سازی پارامترهای جوشکاری فولاد کم‌کربن EN 10130 به روش جوشکاری اصطکاکی-اغتشاشی
  اکبر علیمحمدی مسعود کثیری مسعود افرند حسین نوروزی فروشانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Effect of friction stir welding parameters of aluminum alloy tubes on succeeding rotary draw bending
  Alireza Soleymanipoor Hamid Montazerolghaem Mohsen Loh-mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Comparison of the Microstructure and Mechanical Behavior of the Welding Zone of Aluminum Alloy 5754 by FSW and TIG Methods
  Esmaeil  Zarei Ahmad Afsari Eshagh  Saharkhiz Seyed Kambiz  Ghaemi Osgouie
  10.71762/7mt5-v498
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Influence of Friction Stir Welding Parameters on Mechanical and Metallurgical Properties in Lap Joints of 5456Aluminum Alloy
  منصور مردعلی زاده محمد علی صفرخانیان محمد رضا سلیمانی یزدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Modification of mechanical properties of friction stir welded AM60 magnesium alloy with changing rotational speed and addition of nano alumina particles
  Arash Behzadinezhad Abbas mohassel Hamid Omidvar Nader Setoudeh
  10.30495/jnm.2022.28682.1932
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - The effect of pin shape on microstructure and mechanical properties of HA-Ti surface composites produced by FSP method
  Amirhosein Shahbaz Mehrdad Abbasi Hamed Sabet
  10.30495/jnm.2024.32961.2027
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Fabrication of Aluminum Foam by ARB and Investigation on Its Friction Stir Welded Joint Properties
  S.J موسوی دولت آبادی S. توحید