List of Articles Fracture

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Fracture Toughness of HVOF Thermally Sprayed WC-12Co Coating in Optimized Particle Temperature
  M. Jalali Azizpour M. Salehi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Experimental Investigation of Incremental Forming Process of Bilayer Hybrid Brass/St13 Sheets
  R. Ashouri H. Shahrajabian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Investigating the Reason for Compressor Gearbox Gear Failure in Arfa Iron and Steel Company using Analytical and Fracture Studies
  Mahdi Ebrahimzadeh Ali Galehdari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Studying the Effect of Pulse Shape on Dynamic Stress Intensity Factor at the Finite Crack Tip using Displacement Fields
  Hossein Rahmani Mohammad Ahmadi Balootaki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Preparation of Nitrogen-Doped Graphene Aerogel/Epoxy Nanocomposites and Experimental Study of Mechanical Properties
  ali kordi saeed adibnazari Ali Imam mohammad najafi maryam ghasabzadeh saryazdi
  10.30495/admt.2020.1904850.1205
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Evaluation of Mixed-Mode Center Crack SIF in a Curved Plate Repaired by Stop Holes, Composite Patch, and Hybrid Methods
  Sirvan Mohammadi sadegh daryaei
  10.30486/admt.2022.1947527.1329
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Comparison of Fracture Strength in Endodontically Treated Teeth Restored with Bulk fill, Bulk Fill Flowable and Conventional Composite with or without Using Ribbon Fibers
  Amin Seidy Parvin Mirzakouchaki Leila Pishevar
  10.30486/cofs.2023.1989843.1010
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Effect of Thickness on Fracture Toughness of Al6061-Graphite
  S Doddamani M Kaleemulla
  10.22034/jsm.2019.666695
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Fracture Parameters for Cracked Cylincal Shells
  M Kadri A Sahli S Sahli
  10.22034/jsm.2019.664221
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - The Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
  R Safdarian
  10.22034/jsm.2019.668616
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Fatigue Life Prediction of Rivet Joints
  M. M Amiri
  10.22034/jsm.2019.1867882.1436
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - The Fracture Toughness of the Welding Zone in Gas Transfer Steel Pipes by Experimental and Numerical Methods
  M. R Torshizian M Boustani
  10.22034/jsm.2021.1896358.1570
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Evaluation of Stress Intensity Factor in a Center Cracked Curved Plate Repaired with Stop Holes, Composite Patch, and Hybrid Methods
  Sirvan  Mohammadi S Daryaei
  https://doi.org/10.60664/jsm.2023.1051698
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Influence of Notch Depth-to-Width Ratios on J-Integral and Critical Failure Load of Single-Edge Notched Tensile Aluminium 8011 Alloy Specimens
  C.S Sumesh P.J Arun Narayanan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Dynamic Fracture Analysis Using an Uncoupled Arbitrary Lagrangian Eulerian Finite Element Formulation
  A.R Shahani M.R Amini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Finite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
  S.S Bhadauria K.K Pathak M.S Hora
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Analysis of the Fracture of a Turbine Blade
  A.R Shourangiz Haghighi S Rahmanian A Shamsabadi A zare I Zare
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Application of the GTN Model in Ductile Fracture Prediction of 7075-T651 Aluminum Alloy
  S.F Hosseini S Hadidi-Moud
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Crack Tip Constraint for Anisotropic Sheet Metal Plate Subjected to Mode-I Fracture
  R Kacker S.S Bhadauria
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Crack Interaction Studies Using XFEM Technique
  K Sharma
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Shape- Dependent Term Investigation of Khan- Liu Yield/ Fracture Criterion as a Function of Plastic Strain for Anisotropic Metals
  F Farhadzadeh M Tajdari M Salmani Tehrani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - An Experimental Investigation on Fracture Analysis of Polymer Matrix Composite under Different Thermal Cycling Conditions
  A.R Ghasemi M Moradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Palaeostress configuration of Pan-African orogeny: evidence from the Igarra schist belt, SW Nigeria
  Efosa Udinmwen
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Improving the accuracy of fracture modeling in carbonate reservoirs X-field in SW of Iran
  Seyyedeh Ellieh Moafi Madani Hossein Hassani Behzad Tokhmechi
  10.30495/ijes.2020.673334
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Fractal analyses of fracture network geometry: an example from the Tassili-n-Ajjers area, SE Algeria
  Reda Samy Zazoun
  10.30495/ijes.2023.1945482.1681
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Simulation of thermal stress in the hot rolling process and its effect on roller failure
  Amirheshmat Khedmati Bazkiaei Ali Sozangar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Geometrical of Faults and Fractures in Oily Khaviz Anticline Using Remote Sensing Techniques
  Siamak Baharvand salman soori Maryam Ghasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Review of stress distribution situation and fracture mechanism in flexible pavements using Finite Element Method
  علی بابائی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Study on Young's Modulus, Fracture toughness & Energy of Composites Reinforced by ZnO Nanoparticles through Regression Tree, ANN & RSM
  abdorreza alavi gharahbagh Ali dadrasi sasan folladpanjeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Investigation of energy and fracture modes of nanocomposites reinforced with real carbon nanotubes
  shahrbanoo hamedi Mansoor Fotohyan mahdiye hamedi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Cracks Analysis in Zavin Concrete Dam Using Fracture Mechanics Approach
  Hossein Rezaee Azariani Mohammad Reza Esfahani keivan bina Soheil Ghareh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Fracture analysis of conical shells containing an internal semi-elliptical crack
  C. Burvill M.M. Kheirikhah S. Omidi S. Gohari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Relationship between quality of life and social support among women who suffer from bon fracture
  Nasrin Ghassab Mozaffari
  10.30495/jss.2020.1891834.1213
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Surgical treatment of fractured humerus in a golden eagle (Aquila chrysaetos): a case report
  Davoud Kazemi
  10.30495/jvcp.2021.1914594.1285
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Treatment of long oblique femoral fracture in a Rhesus macaque monkey
  hamidreza fattahian hamid mohiedin rouzbeh moridpour fereshte Khomejani Farahani mahya Jazini Dorche soude Ansari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Investigation of mechanical properties and fracture surfaces of 5086 Al-based alloy processed by equal channel angular pressing in different routes
  Seyed Elias Mousavi Mohammad Hossein Khaleghifar Farshid Ahmadi Mahmood Meratian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Fatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution
  Mahmoud Hajisafari Arman Zare Bidaki Saeid Yazdani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Investigating the Effects of Boron and Zirconium on the High-Temperature Fatigue Behavior of Nimonic 105 Super Alloy
  Zahra Asghary Masumeh Seifollahi Maryam Morakabati Seyed Mahdi Abbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - The Effect of Microstructure on Estimation of the Fracture Toughness (KIC) Rotor Steel Using Charpy Absorbed Energy (CVN)
  A Salemi Golezani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures
  Abdolreza Rastitalab Salar Khajehpour Ahmad Afsari Shahin Heidari Javad Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - An Investigation of Using RCS-processed Intramedullary Stainless Steel 316L Nail in the Treatment of Diaphyseal Bone Fractures
  Abdolreza Rastitalab Salar Khajehpour Ahmad Afsari Shahin Heidari Javad Dehghani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Evaluation of Stability and Reliability of Motorized Unilateral External Fixator, Designed and Simulated using Finite Element Method to Treat Bone Fractures and Bone Loss
  Alireza Bahramkia Mehran Fakhraie Salar Khajehpour Seyed Mohammad Tahami Raheb Gholami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Experimental Study of Shearing Dimensional Parameters in the Sheet Metal Blanking Process of StW24 Steel with a Thickness of 12 mm
  Farshid Ahmadi Amir Abdollahi Saeid Zamani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Investigation of the Bond - Slip Effect on Cracking of RC Panel Using Lattice Model
  Hamide shojaefar Masoud farzam
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Locator Materials of Bone
  A. Oryan S. Monazah-Harsini
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - ارزیابی مقاومت مکانیکی ساقه گل ژربرا در واکنش به مصرف سیلیسیوم و اسید سالیسیلیک
  میثم بابالار بهزاد ادریسی روح انگیز نادری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Assessment of Factors Influencing Occurrence of Izeh Plain Watershed Springs
  Nasolah Kalantari Mohammadreza Keshavarzi Abas Charchi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Comparison of Equivalent Continuum and Discontinuum Methods in Stability Analysis of a Natural Underground Karst
  Mahnaz Laghaei Alireza Baghbanan Masoud Torkan Siavash Norouzi Meysam Lak
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - The Effect of Fracture Intersection on Drilling Mud Loss in Iranian Gas Fields
  Abbas Kangi Zahra Alimirzaei Gholamhossein Montazeri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Geometric Analysis of Faults and Fractures of Vizenhaar Oil-rich Anticline using Remote Sensing Techniques
  Siamak Baharvand
  10.30495/geotech.2021.689469
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - تجزیه و تحلیل میدان تنشV-Notches با ترک نوک در یک ماده پلیمری با استفاده از همبستگی تصویر دیجیتال
  ن. سلطانی م.ر. یادگاری ا. اشراقی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - تعیین مقاومت کششی و رشد ترک یک بتن پلیمری معمولی با استفاده از نمونه های دیسک دایره ای
  م.ر.م علیها م. حیدری رارانی م.م. شکریه م.ر آیت اللهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - ترمیم شکستگی غضروف گوش اسب با استفاده از کریشنر وایر
  سحر گوهری راد علیرضا نجف پور
  10.30495/jbcvm.2021.1930943.1013
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Investigation of 6061 aluminum alloy pulsed laser welding based on the physical models for prediction of hot cracks
  hossain ebrahimzadeh hassan farhangi seyed ali asghar akbari mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Improvement in fracture toughness and wear resistance of plasma-sprayed chromia coating by addition of YSZ nanoparticles
  Seyed Mahdi Hashemi Nader Parvin Zia Valefi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - The correlation between fracture surface morphology and toughness/ductility in Zr46(Cu4.5/5.5Ag1/5.5)46Al8 bulk metallic glass
  Mohammad Taghi Asadi Khanouki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Fracture toughness and plasticity evaluation of sputter deposited tantalum nitride thin film
  Siavash Firouzabadi Kamran Dehghani Malek Naderi Farzad Mahboubi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Reviewing the effect of oxidizing sintering aids on sinterability behavior of boron carbide composites (B4C)
  Mehdi Shakori Mina Saeeidi heidari Hamidreza Baharvandi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - مکانیک شکست مود ترکیبی در صفحه سوراخ دار محصور شده بین دو صفحه با جنس متفاوت
  محمد رحیم ترشیزیان حسین اندرزجو
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Modeling and Crack-growth and Calculate First Intensity Factor with Ansys Software
  S.M. Hossein Mirgilani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - بررسی تجربی مکانیک شکست در مواد مرکب زمینه آلومینیومی حاوی پانزده درصد ذرات کاربید سیلیسیم
  محمد رنجبران محمد تقی نجفی مهدی اعطائی رسول امینی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Humeral condylar fracture in dog, a case report, therapeutic complexities
  Abolfazl Barzegar-Bafrouei Moosa Javdani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Clinical report of reconstructive surgery of sacroiliac separation and iliac shaft fracture in dog
  H.R Fattahian, M. Nasrolahzadeh Masoule, A.R. Hosseinzadeh,
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Permeability Variation and Fracture/Crack Effects in Concrete/Rocks based on Multi-laminate Model
  Farzad Peyman
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Stress and Fracture Analysis of a Fitting in Slug Catcher of Gas Refinery
  مهدی Javidi فاطمه السادات Mousavi Shirazi رامین Ebrahimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Effect Of Quenching and Tempering Temperature on the Fracture Quality of GS-45CrNiMo4-2 Steel, Through the Quench-Temper Heat Treatment Cycle
  Hamed Eskandari Mansoor Farzam Omid Abbasi Larki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Effect of the shoulder size and dwell time on the static Strength and fracture mode of projection friction stir spot welded 2024 aluminum alloy
  F. zarghani seid m. mousavizade G.R Ebrahimi H.R. Ezatpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Fracture Resistance Improvement of Micro Alloy Steel Weld in Four Wire Submerged Arc Welding by applying One and Two Thermal Cycles
  M.S. Moeinifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Fabrication and characterization of Zirconia-Alumina composites reinforced by graphite
  mehdi pourmaleki Zohre Balak