• فهرس المقالات POX

      • حرية الوصول المقاله

        1 - 4D-QSAR analysis and pharmacophore modeling: propoxy methylphenyl oxasiazole derivatives by electron conformatitional-genetic algorithm method
        Burak Tüzün Sevtap Çağlar Yavuz Emin Sarıpınar
        In this 4D-QSAR study, we obtained pharmacophore identification and biological activity prediction for 50 propoxy methylphenyl oxadiazole derivatives by the Electron Conformational Genetic Algorithm approach. In light of the results given in the data obtained from quant أکثر
        In this 4D-QSAR study, we obtained pharmacophore identification and biological activity prediction for 50 propoxy methylphenyl oxadiazole derivatives by the Electron Conformational Genetic Algorithm approach. In light of the results given in the data obtained from quantum chemical calculations at HF/3-21 G level, the electron conformational matrices of congruity (ECMC) were built by EMRE software. Considering the pharmacophore atoms, a parameter pool was introduced into the field. To find the theoretical biological activity of the molecules used in this study, the non-linear least squares regression method and genetic algorithm were used to determine the best subset of variables affecting bioactivity. As can be understand from our explanations, it should be noted that the results obtained in this study are in good agreement with the experimental data presented in the literature. The model for the training and test sets attained by the optimum 8 parameters gave highly satisfactory results with R2training= 0.872, q2=0.836 and SEtraining=0.059, q2ext1 = 0.787, q2ext2 = 0.786, q2ext3=0.830, ccctr = 0.933, ccctest = 0.896 and cccall = 0.926. تفاصيل المقالة
      • حرية الوصول المقاله

        2 - Epoxidation of Alkenes and Oxidation of Alcohols with Hydrogen Peroxide Catalyzed by a Fe (Br8TPPS) Supported on Amberlite IRA-400
        Shahla Masoudian Parvaneh Pakravan
        Iron (III) meso-tetrakis(p-sulfonatophenyl)-β-octabromoporphyrin supported on Amberlite IRA- 400 [Fe(Br8 TPPS)-Ad-400] is a robust and efficient catalyst for oxidation of alkenes and alcohols at room temperature. The catalyst exhibits a high activity and stability أکثر
        Iron (III) meso-tetrakis(p-sulfonatophenyl)-β-octabromoporphyrin supported on Amberlite IRA- 400 [Fe(Br8 TPPS)-Ad-400] is a robust and efficient catalyst for oxidation of alkenes and alcohols at room temperature. The catalyst exhibits a high activity and stability in hydrocarbon oxidation by H2 O2 . The method was useful in the oxidation of various primary, secondary-aliphatic, alicyclic and aromatic alcohols. Both activated and non-activated alcohols were converted into their corresponding carbonyls efficiently and selectively. Aqueous hydrogen peroxide as an environmentally benign oxidant is utilized in oxygen transfer. The oxidation reaction using heterogeneous solid catalysts with H2 O2 as oxidants are environmentally friendly routes to produce extensively useful epoxides which are traditionally obtained from capital-intensive or environmentally polluted processes. تفاصيل المقالة
      • حرية الوصول المقاله

        3 - Theoretical Predictions on Mechanical Properties of Functionally Graded Epoxy/Clay Nanocomposites
        Mahdi Karami Khorramabadi
        In this paper, the theoretical predictions of mechanical properties of functionally graded and uniform distributions Epoxy/clay nanocomposites are presented. The specimens were prepared for uniformly distribution of nanoclay with different nano particles weight percent أکثر
        In this paper, the theoretical predictions of mechanical properties of functionally graded and uniform distributions Epoxy/clay nanocomposites are presented. The specimens were prepared for uniformly distribution of nanoclay with different nano particles weight percent (pure, 3 wt%, 5 wt% and 7 wt%) and functionally graded distribution. The distribution of nanoparticles has been investigated by Field Emission Scanning Electron Microscopy (FESEM). For uniformly distribution of nanoclay, it is shown that there is no sign of the agglomerates found via FESEM imaging which can address well the distribution of nanoclay particles in epoxy. In addition, for functionally graded distributions, it is found that dispersion of nanoclays vary smoothly and continuously from one surface to the other one. The mechanical properties have been determined by simple extension tests. The results of extension tests show that elastic modulus begins to increase up to 5 wt% of nanoclay and then decreases. So, for functionally graded distribution, the elastic modulus is generally larger than the corresponding values for uniform distribution of nanoclay. The theoretical predictions of Young’s modulus for functionally graded and uniform distributions nanocomposites are calculated using a genetic algorithm procedure. The formulation for Young modulus includes the effect of nanoparticles weight fractions and it is modified for functionally graded distribution. To investigate the accuracy of the present theoretical predictions, a comparison is carried out with the experimental results. It is found that the results obtained from the theoretical predictions of genetic algorithm procedure are in good agreement with the experimental ones. تفاصيل المقالة
      • حرية الوصول المقاله

        4 - Thermomechanical Properties of the Polymeric Nanocomposite Predicted by Molecular Dynamics
        Majid Hadipeykani farshid Aghadavoudi Davood Toghraie
        A molecular dynamics simulation study is employed to investigate the elastic and basic thermal properties of thermoset polymer based nanocomposite sample reinforced by CNT. The COMPASS force filed was used to construct the simulation box. The simulation box contains the أکثر
        A molecular dynamics simulation study is employed to investigate the elastic and basic thermal properties of thermoset polymer based nanocomposite sample reinforced by CNT. The COMPASS force filed was used to construct the simulation box. The simulation box contains the cured epoxy resin molecules obtained from cross linking process of DGEBA and DETA which were located around the CNT (10,10). NVT and NPT ensembles were performed to equilibrate the system and convergence of temperature, energy and density have been checked. The elastic constants of molecular sample of nanocomposite were determined based on stiffness matrix and compared with the molecular results of pure resin. The results show that the Young's modulus in the transverse direction of nanocomposite model is less than that in longitudinal direction indicating the transversely isotropic behaviour at atomic scale. Glass transition temperature (Tg) and coefficient of thermal expansion (CTE) were calculated through the linear fitting of density-temperature diagram for the CNT-reinforced nanocomposite model. Atomistic simulation results showed decrease in Tg and CTE comparing to the pure epoxy. Moreover, the simulation results were compared with the measured values and good agreements are observed. تفاصيل المقالة
      • حرية الوصول المقاله

        5 - Fabrication, Testing and Analysis of Composite Lattice Panels Under Three-Point Bending Load
        Mahdi Farhadi Ali Davar Mohsen Heydari Beni Jafar Eskandari Jam
        Thanks to their high strength-to-weight ratio, lightweightness, and excellent energy absorption, composite lattice panels can be used in the aerospace, marine, automotive, and other industries. These structures can be used as an alternative to string-reinforced structur أکثر
        Thanks to their high strength-to-weight ratio, lightweightness, and excellent energy absorption, composite lattice panels can be used in the aerospace, marine, automotive, and other industries. These structures can be used as an alternative to string-reinforced structures, honeycomb (core) sandwich panels, and aluminum grid structures. In this paper, a composite lattice panel is first fabricated from glass/epoxy by hand lay-up method using a silicon rubber mold. In this method, a Kagome composite lattice panel with twelve layers of resin-impregnated fibers was fabricated during a continuous process. After fabrication, the test panel was shown under three-point bending and failure modes. Also, a numerical simulation of three-point bending was performed in ABAQUS software. Then, the simulation results were compared with those of the experimental test, indicating a good convergence between the experimental test results and the finite element ones up to the point of failure. Due to changes in directions of force, these structures have a high ability to withstand damage, and therefore, continue to withstand the load after the failure of one or more ribs. Also, there is no sudden and sharp drop in the load-bearing capacity of the structure despite the force being maximized, which can be attributed to the high energy absorption of such structures. Instead, the force decreases slowly with fluctuations, and the structure continues to absorb energy until final failure. Therefore, such lightweight structures can be used in applications where energy absorption is of great importance. تفاصيل المقالة
      • حرية الوصول المقاله

        6 - Best Co-approximation and Worst Approximation by Closed Unit Balls
        Hamid Tehrani
        ‎A kind of approximation‎, ‎called best coapproximation was‎ introduced and discussed in normed linear spaces by C‎. ‎Franchetti and M‎. Furi in 1972‎. ‎Subsequently‎, ‎this study was taken up by several researchers‎ in di أکثر
        ‎A kind of approximation‎, ‎called best coapproximation was‎ introduced and discussed in normed linear spaces by C‎. ‎Franchetti and M‎. Furi in 1972‎. ‎Subsequently‎, ‎this study was taken up by several researchers‎ in different abstract spaces‎. In this paper‎, ‎we consider best coapproximation by closed unit balls‎. ‎We define qcoproximinal and coremotal‎, ‎and find some theorems. تفاصيل المقالة
      • حرية الوصول المقاله

        7 - مقایسه پایداری حرارتی رزین های اپوکسی پخت شده با مشتقات بنزیلیدین بیس-(4-هیدروکسی‌کومارین)
        قاسم راه پیما جلیل خضری
        در این تحقیق، برای تهیه رزین اپوکسی با کارایی بالا و پایداری حرارتی عالی از مشتقات بنزیلیدین بیس-(4-هیدروکسی کومارین) به عنوان عامل پخت استفاده شد. برای این منظور 4 مشتق بنزیلیدین بیس 4-هیدروکسی کومارین با استفاده از کاتالیست نانوکامپوزیت پلیمری 2–آمینو فنول/طارون أکثر
        در این تحقیق، برای تهیه رزین اپوکسی با کارایی بالا و پایداری حرارتی عالی از مشتقات بنزیلیدین بیس-(4-هیدروکسی کومارین) به عنوان عامل پخت استفاده شد. برای این منظور 4 مشتق بنزیلیدین بیس 4-هیدروکسی کومارین با استفاده از کاتالیست نانوکامپوزیت پلیمری 2–آمینو فنول/طارونه نخل سنتز گردید. به منظور بررسی ریخت شناسی رزین اپوکسی پخت شده از روش میکروسکوپ الکترونی روبشی (SEM) استفاده شد. مقایسه پارامترهای دمای شروع تخریب، بازده کربن باقیمانده و پارامترهای سینتیکی برای ارزیابی پایداری حرارتی رزین اپوکسی پخت شده با استفاده از آنالیز وزن سنجی حرارتی(TGA) انجام شد. نتایج نشان داد که رزین اپوکسی پخت شده با مشتق 3و'3-(4-نیترو بنزیلیدین)- بیـس-(4-هیدروکسی‌کومارین) دمای شروع تخریب و بازده کربن بالاتری نسبت به سایر مشتقات دارد. پس از مشتق 4-نیترو به ترتیب مشتقات دارای 4-کلرو، 4- فلوئورو و 4-متیل، پایداری حرارتی بالاتری دارند. بنابراین می توان گفت که گروه نیترو پایداری حرارتی بالاتری را نسبت به کلر، فلوئور و متیل برای رزین اپوکسی پخت شده فراهم کرده است. مشتقات بنزیلیدین 4-هیدروکسی کومارین به دلیل دارابودن حلقه های آروماتیک، پایداری حرارتی بالایی را برای رزین اپوکسی پخت شده به ارمغان می آورند. تفاصيل المقالة
      • حرية الوصول المقاله

        8 - Novel synthesis of Pyrimido[4,5- e] [1,3,4] thiadiazines
        Abdolhassan Doulah
        Treatment of 1-(5-bromo-2-chloro-6-methylpyrimidin-4-yl)-1-methylhydrazine with dimethylthiocarbamoylchloride gave 7-chloro-N,N,1,5-tetramethyl-1H-pyrimido[4,5-e][1,3,4]thiadiazin-3-amine in basic acetonitrile. The latter compounds were reacted with secondary amines in أکثر
        Treatment of 1-(5-bromo-2-chloro-6-methylpyrimidin-4-yl)-1-methylhydrazine with dimethylthiocarbamoylchloride gave 7-chloro-N,N,1,5-tetramethyl-1H-pyrimido[4,5-e][1,3,4]thiadiazin-3-amine in basic acetonitrile. The latter compounds were reacted with secondary amines in boiling ethanol to afford the related 7-amino derivatives. تفاصيل المقالة
      • حرية الوصول المقاله

        9 - Efficient synthesis of β-hydroxy thiocyanates from epoxides and ammonium thiocyanate using 1,4-bis(triphenylphosphonium)-2-butene dichloride as a new catalyst
        Maryam Gorjizadeh Mozhgan Afshari Mohammad Azarkish
        1,4-bis(triphenylphosphonium)-2-butene dichloride was developed as a new phase transfer catalyst. This quaternized phosphonium salt catalyzed the regioselective ring opening of epoxides by thiocyanate ion to give β-hydroxy thiocyanates in high yields under mild con أکثر
        1,4-bis(triphenylphosphonium)-2-butene dichloride was developed as a new phase transfer catalyst. This quaternized phosphonium salt catalyzed the regioselective ring opening of epoxides by thiocyanate ion to give β-hydroxy thiocyanates in high yields under mild conditions. تفاصيل المقالة
      • حرية الوصول المقاله

        10 - Novel synthesis of Pyrimido[4,5- e] [1,3,4] thiadiazines
        Abdolhassan Doulah Hamid Sadeghian
        Treatment of 1-(5-bromo-2-chloro-6-methylpyrimidin-4-yl)-1-methylhydrazine with dimethylthiocarbamoylchloride gave 7-chloro-N,N,1,5-tetramethyl-1H-pyrimido[4,5-e][1,3,4]thiadiazin-3-amine in basic acetonitrile. The latter compounds were reacted with secondary amines in أکثر
        Treatment of 1-(5-bromo-2-chloro-6-methylpyrimidin-4-yl)-1-methylhydrazine with dimethylthiocarbamoylchloride gave 7-chloro-N,N,1,5-tetramethyl-1H-pyrimido[4,5-e][1,3,4]thiadiazin-3-amine in basic acetonitrile. The latter compounds were reacted with secondary amines in boiling ethanol to afford the related 7-amino derivatives. تفاصيل المقالة
      • حرية الوصول المقاله

        11 - Manganese salophen complex supported on magnetic nanoparticles as an efficient, selective and recyclable catalyst for epoxidation of alkenes
        Mozhgan Afshari Maryam Gorjizadeh Simin Nazari
        A magnetically recoverable catalyst consisting of Mn (III) salophen complex was prepared. The synthesized catalyst was characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), inductively coupled plasm أکثر
        A magnetically recoverable catalyst consisting of Mn (III) salophen complex was prepared. The synthesized catalyst was characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), inductively coupled plasma atomic emission spectroscopy (ICP-AES) and Fourier transform infrared (FT-IR). The immobilized catalyst was shown to be an efficient heterogeneous catalyst for the epoxidation of various alkenes using hydrogen peroxide (H2O2) as oxidant. The catalyst could be easily and efficiently isolated from the final product solution by magnetic decantation and be reused for 5 consecutive reactions without showing any significant activity degradation. تفاصيل المقالة
      • حرية الوصول المقاله

        12 - Magnetic nanoparticles containing Manganese salophen complex as an selective and recyclable catalyst for epoxidation of alkenes
        Mozhgan Afshari Maryam Gorjizadeh Simin Nazari
        A magnetically recoverable catalyst consisting of Mn (III) salophen complex was prepared. The synthesized catalyst was characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), inductively coupled plasm أکثر
        A magnetically recoverable catalyst consisting of Mn (III) salophen complex was prepared. The synthesized catalyst was characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), inductively coupled plasma atomic emission spectroscopy (ICP-AES) and Fourier transform infrared (FT-IR). The immobilized catalyst was shown to be an efficient heterogeneous catalyst for the epoxidation of various alkenes using hydrogen peroxide (H2O2) as oxidant. The catalyst could be easily and efficiently isolated from the final product solution by magnetic decantation and be reused for 5 consecutive reactions without showing any significant activity degradation. تفاصيل المقالة
      • حرية الوصول المقاله

        13 - کاربرد میکرو ذرات دی اکسید تیتانیوم و ذرات ضد آب شده با تکنولوژی نانو در پوشش‌های کامپوزیتی رنگ اپوکسی بر روی فولاد X52
        امیر کاظمی احمد منشی مهدی بروجردنیا
        در این پژوهش دو نوع پوشش کامپوزیتی بر پایه رنگ اپوکسی تقویت شده توسط نانو و میکرو ذرات دی اکسید تیتانیوم و ذرات آبگریز شده آن به طور جداگانه و با غلظت‌های 1، 2، 3، 4 و 5 درصد وزنی برای بهبود ویژگی‌های رنگ اپوکسی تهیه شد. به منظور بررسی رفتار آن ها بر روی فولاد X52 اعما أکثر
        در این پژوهش دو نوع پوشش کامپوزیتی بر پایه رنگ اپوکسی تقویت شده توسط نانو و میکرو ذرات دی اکسید تیتانیوم و ذرات آبگریز شده آن به طور جداگانه و با غلظت‌های 1، 2، 3، 4 و 5 درصد وزنی برای بهبود ویژگی‌های رنگ اپوکسی تهیه شد. به منظور بررسی رفتار آن ها بر روی فولاد X52 اعمال گردیدند و سپس با انجام آزمون‌های خوردگی و سایش خواص آن ها مورد بررسی قرار گرفت. ضخامت پوشش‌ها توسط دستگاه ضخامت سنج دیجیتال بررسی شدو رفتار مقاومت به خوردگی پوشش‌ها با استفاده از روش پلاریزاسیون در محلول سدیم کلرید 5/3% ارزیابی شد. نتایج آزمون خوردگی نشان داد که با اضافه کردن و افزایش غلظت ذرات تقویت کننده در پوشش‌ها مقاومت به خوردگی بهبود یافته و همچنین پوشش کامپوزیتی رنگ اپوکسی دارای 5 درصد وزنی تقویت کننده دی اکسید تیتانیوم آبگریز شده، مقاومت به خوردگی بهتری نسبت به سایر نمونه‌ها از خود نشان می دهد. برای بررسی خواص مورفولوژی سطح از میکروسکوپ الکترونی روبشی مجهز استفاده گردید. نتایج به دست آمده از این آنالیز توزیع مناسب و یکنواخت ذرات آبگریز شده در زمینه پوشش اپوکسی را نشان داده است. مقاومت به سایش پوشش‌ها توسط دستگاه آزمون گلوله بر روی دیسک انجام شد. نتایج آزمون سایش نشان داد که با اضافه کردن و افزایش غلظت ذرات تقویت کننده در پوشش مقاومت سایشی پوشش افزایش یافته، اما با مقایسه نمونه‌های کامپوزیتی اپوکسی مشخص گردید که آبگریز شدن ذرات تقویت کننده تاثیری بر مقاومت به سایش نداشته است. تفاصيل المقالة
      • حرية الوصول المقاله

        14 - Preparation of surfactant modified inorganic nanofibers for the removal of oily compounds from water
        Elnaz Doshanbeh pour
        Oily compounds threat people’s health and aquatic life due to their toxic nature. In this project, surfactant grafted functionalized mesoporous silica nanofiber with the aim of separating the oil spillage was synthesized. Firstly, the electrospun mesoporous silica أکثر
        Oily compounds threat people’s health and aquatic life due to their toxic nature. In this project, surfactant grafted functionalized mesoporous silica nanofiber with the aim of separating the oil spillage was synthesized. Firstly, the electrospun mesoporous silica nanofiber was functionalized by [3-(2, 3- Epoxypropoxy)-propyl]-trimethoxysilane in an alkali condition. Secondly, the 4-nonylphenol as a surfactant was grafted onto the surface of functionalized mesoporous silica nanofiber. The grafting yield of surfactant on the surface of functionalized mesoporous silica nanofiber was evaluated. Then by using the BET analysis, the nanofibre surface area was investigated, and finally, optimum conditions with respect to the grafting yield of 4-nonylphenol and BET analysis were reported. In order to characterize the synthesized nanofibers, FTIR, SEM, and AFM analyses were used. The pore size distribution of synthesized nanofibers was investigated by the BJH method.The results showed that the [3-(2, 3- Epoxypropoxy)-propyl]-trimethoxysilane and surfactant were attached to the nanofiber surface through the covalent linkages. SEM images exhibited the deposition of a dense layer on the surface of grafted nanofibers. Moreover, AFM analysis revealed that the surface of the nanofiber became rough after the functionalization and grafting processes. In order to evaluate the superhydrophobic properties of nanofibers, contact angle analyses were investigated. The synthesized absorbent showed a high absorption capacity of 128.1 and 102.3 g/g for heavy motor oil and diesel fuel, respectively. The absorbed oil was easily removed by vacuum filtration and the nanofiber could be reused for several cycles while keeping high absorption capacity تفاصيل المقالة
      • حرية الوصول المقاله

        15 - بررسی اثر کلسیم بر روی رشد، شاخص‌های اکسیداتیو، آسکوربات، گلوتاتیون و فعالیت آنزیم‌های آنتی‌اکسیدان در گیاه تریتیکاله (Triticosecale Wittmack ×) تحت تنش شوری
        ملیحه جهانی محمدرضا هادی مجتبی جعفری نیا صدیقه جهانی
        مقدمه: شوری یک مشکل در حال توسعه در خاک‌های کشاورزی است. کلسیم نقش مهمی در مقاومت گیاهان به تنش شوری دارد. هدف: به منظور بررسی تأثیر متقابل سدیم-کلسیم بر روی رشد، شاخص‌های اکسیداتیو و سیستم دفاع آنتی‌اکسیدانی در گیاه تریتیکاله، آزمایشی بصورت یک طرح کاملاً تصادفی با 3 تک أکثر
        مقدمه: شوری یک مشکل در حال توسعه در خاک‌های کشاورزی است. کلسیم نقش مهمی در مقاومت گیاهان به تنش شوری دارد. هدف: به منظور بررسی تأثیر متقابل سدیم-کلسیم بر روی رشد، شاخص‌های اکسیداتیو و سیستم دفاع آنتی‌اکسیدانی در گیاه تریتیکاله، آزمایشی بصورت یک طرح کاملاً تصادفی با 3 تکرار در شرایط گلخانه‌ای صورت گرفت. مواد و روش‌ها: یک هفته بعد از کاشت بذور در خاک، گیاهچه‌ها با غلظت‌های کلرید سدیم (0، 50، 100 و 150 میلی‌مول بر لیتر) و توأم با غلظت‌های کلرید کلسیم (0، 6 و 10 میلی‌مول بر لیتر) تیمار شدند. پس از 5 هفته اعمال تنش، برخی از پارامترهای مورفو- فیزیولوژیکی و بیوشیمیایی شامل طول بخش هوایی و ریشه، عدد کلروفیل‌متر (SPAD)، شاخص‌های اکسیداتیو (مالون‌‌دی‌‌آلدئید، سایر آلدئیدها، پراکسید هیدروژن و فعالیت آنزیم لیپواکسیژناز)، آسکوربات احیا، دهیدروآسکوربات، گلوتاتیون احیا و فعالیت آنزیم‌های آنتی‌اکسیدان (گایاکول ‌پراکسیداز، کاتالاز، سوپر‌اکسید ‌دیسموتاز، آسکوربات ‌پراکسیداز و پلی‌فنل ‌‌اکسیداز) برگ مورد سنجش قرار گرفت. نتایج: نتایج نشان داد که تنش شوری بطور معنی‌داری باعث کاهش طول بخش هوایی و ریشه، SPAD، آسکوربات احیا و گلوتاتیون احیا در برگ شد ولی باعث افزایش میزان شاخص‌های اکسیداتیو، دهیدروآسکوربات و فعالیت آنزیم‌های آنتی اکسیدان برگ شد. در‌حالی‌که افزودن کلسیم به محیط شور باعث افزایش طول بخش هوایی و ریشه، SPAD، آسکوربات احیا و گلوتاتیون احیا در برگ شد ولی باعث کاهش میزان شاخص‌های اکسیداتیو، دهیدروآسکوربات و فعالیت آنزیم‌های آنتی اکسیدان در برگ شد. نتیجه‌گیری: افزودن کلسیم به محیط شور باعث کاهش اثرات مضر تنش شوری شد و بیشترین اثرات بهبود‌‌دهنده کلسیم در غلظت 6 میلی‌مول بر لیتر مشاهده شد. تفاصيل المقالة
      • حرية الوصول المقاله

        16 - Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process
        Sadegh Shahriyari Mahdi Omidi Seyyed Ali Hassanzadeh Tabrizi Mahdi Yeganeh Hamid Reza Bakhsheshi-Rad
        In this study, ultrasonic bath and milling processes were used to synthesis epoxy resin-multiwalled carbon nanotubes (MWCNT) composite, and their effect on the absorption of magnetic waves was investigated using the Vector Network Analyzer (VNA) test. The effect of the أکثر
        In this study, ultrasonic bath and milling processes were used to synthesis epoxy resin-multiwalled carbon nanotubes (MWCNT) composite, and their effect on the absorption of magnetic waves was investigated using the Vector Network Analyzer (VNA) test. The effect of the concentration of MWCNT used to attract the wave's magnetic part in the epoxy resin matrix is also investigated. This study showed that the optimal amount of MWCNT in this epoxy resin-MWCNT composite was about 5 wt.% for the ultrasonic bath method, while it was around 15 wt% for the milling method. The ultrasonic bath caused the reflection losses (RL) value reaches to about -25 dB in the range of 9 to 11 GHz. The results of the VSM test showed that the composite produced from epoxy resin and MWCNT is a soft magnetic material. Also, the sample produced in the ultrasonic bath process has a higher magnetic saturation than the milling process, which causes it to absorb more electromagnetic waves. تفاصيل المقالة
      • حرية الوصول المقاله

        17 - Schiff base functionalized Fe3O4@Boehmite Core-Shell Nano-Particles to Support MoO2(acac)2 for Catalytic Epoxidation of Alkenes
        Mahdi Mirzaee Bahram Bahramian Mohadeseh Hematian
        Fe3O4 nanoparticles were prepared solvothermally and then covered with boehmite shell via hydrothermal assisted sol-gel processing of aluminum 2-propoxide. Then the hydroxyl covered outer surface of the boehmite shell was covalently functionalized with 3-(tri-methoxysil أکثر
        Fe3O4 nanoparticles were prepared solvothermally and then covered with boehmite shell via hydrothermal assisted sol-gel processing of aluminum 2-propoxide. Then the hydroxyl covered outer surface of the boehmite shell was covalently functionalized with 3-(tri-methoxysilyl) propylamine and the terminal amine groups converted to imine by refluxing with 2-hydroxybenzaldehyde. Then it was used to support bis-acetylacetonato-di-oxo-molybdenum (VI). The supported catalyst was characterized by Fourier transform Infrared spectroscopy, elemental analysis, inductive coupled plasma and transmission electron microscopy analysis and it was applied in the epoxidation of cis-cyclooctene. The catalytic procedure was optimized for different parameters such as solvent, oxidant, and temperature. The reaction progress was investigated by gas-liquid chromatography analysis. The used catalyst was simply recovered from the solution by applying a magnet and recycling experiments revealed that this heterogeneous nano-catalyst could be repeatedly applied for the epoxidation of cis-cyclooctene. The optimized conditions were also used for the epoxidation of some other alkenes successfully. تفاصيل المقالة
      • حرية الوصول المقاله

        18 - Using of Thermoplastic Polyurethane Granule (TPU) as a Reinforcing Phase and Self-Healing Agent in a Polymer Composite Resin Epoxy to Exhibit Mechanical Properties Recovery
        Mostafa Hosseini Aazam Ghassemi
        In this study, for the first time, thermoplastic polyurethane granule (TPU) is used as a reinforcing phase and self-healing agent in a polymer composite epoxy resin (ER) to exhibit mechanical properties recovery. When the polymer composite is damaged or cracked, TPU gra أکثر
        In this study, for the first time, thermoplastic polyurethane granule (TPU) is used as a reinforcing phase and self-healing agent in a polymer composite epoxy resin (ER) to exhibit mechanical properties recovery. When the polymer composite is damaged or cracked, TPU granules are released at the site of damage and cause auto-repair of surfaces. Therefore, TPU granules with different composition percentages were mixed in silicon molds containing epoxy resin polymer composite. 4 samples with different TPU granules percentages were selected (A= 0 Wt.% TPU, B=10 Wt.% TPU, C=20 Wt.% TPU, and D=30Wt.% TPU). At first, making a deep cut in 4 polymer composite samples, the self-healing process and mechanical properties improvement are investigated by mechanical tests. In the self-repairing behavior of self-healing samples, it is observed that polymer composite samples with self-repairing agents of ER+20 Wt.% TPU granules had the highest self-healing efficiency (60.2%) compared to other specimens. A mechanical test shows that Sample C has a higher Young’s modulus (4.837 MPa) and higher tensile strength (9.46 MPa). Also, the impact test illustrated Sample C has a higher impact energy of 7.1 (J/m). Therefore, sample C has the highest mechanical properties among self-healing samples. تفاصيل المقالة
      • حرية الوصول المقاله

        19 - Preparation of antibacterial coating film using ZnO nanoparticles and epoxy resin
        hamid reza ghorbani shakiba amirsoleimani
        The production of antibacterial and antifungal nanocomposites is widely used in pharmaceutical, health, food, packaging and medicine industries. Meanwhile, epoxy coating film is one of the most commonly used protective coatings in industrial applications. In this work, أکثر
        The production of antibacterial and antifungal nanocomposites is widely used in pharmaceutical, health, food, packaging and medicine industries. Meanwhile, epoxy coating film is one of the most commonly used protective coatings in industrial applications. In this work, ZnO nanoparticles were first synthesized at three different concentrations. UV-Vis spectroscopy and dynamic light scattering (DLS) analysis were used to study the nanoparticles properties. The results showed that nanoparticles were synthesized with a mean size of 46 nm at 0.01 M zinc sulfate. Then, the nanoparticles were mixed with epoxy at three concentrations and finally ZnO/epoxy nanocomposite were prepared. X-ray diffraction (XRD) and Scanning electron microscopy (SEM) confirmed the existence and size of nanoparticles in epoxy film. The disk diffusion method was used to study the antibacterial activity of ZnO-epoxy nanocomposites against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The results exhibited that the optimum antibacterial activity was in nanocomposite films with concentration 0.01 M of zinc sulfate. تفاصيل المقالة
      • حرية الوصول المقاله

        20 - تاثیر هشت هفته تمرین اینتروال هایپوکسی (کم اکسیژنی) بر حجم ها و ظرفیتهای ریوی منتخب و رکورد شنای کرال سینه شناگرهای نخبه پسر
        حسین نجفقلی زاده
        سابقه و هدف: هدف این پژوهش تأثیر تمرین های هایپوکسی بر حجم ها و ظرفیت های ریوی منتخب و رکورد شناهای کرال سینه شناگرهای نخبه پسر بود. مواد و روش ها: تعداد 22 آزمودنی (شناگران) 14 تا 16 سال به صورت هدفمند انتخاب شدند و در دو گروه تجربی و کنترل تقسیم شدند، گروه تجربی به مد أکثر
        سابقه و هدف: هدف این پژوهش تأثیر تمرین های هایپوکسی بر حجم ها و ظرفیت های ریوی منتخب و رکورد شناهای کرال سینه شناگرهای نخبه پسر بود. مواد و روش ها: تعداد 22 آزمودنی (شناگران) 14 تا 16 سال به صورت هدفمند انتخاب شدند و در دو گروه تجربی و کنترل تقسیم شدند، گروه تجربی به مدت 8 هفته و در هر هفته 3 جلسه (24 جلسه) تحت تأثیر تمرینات هایپوکسی قرار گرفتند. گروه کنترل نیز در این 8 هفته تحت تأثیر تمرینات عادی شنا بودند. آزمون اسپیرومتری و رکورد گیری 48 ساعت قبل و 48 ساعت بعد از تمرینات از هر دو گروه گرفته شد و مورد ارزیابی قرار گرفت. یافته ها: نتایج آزمون حاکی از افزایش معنی دار حجم حیاتی اجباری، حجم بازدمی با فشار در ثانیه اول، نسبت حجم بازدمی با فشار در ثانیه اول بر حجم حیاتی اجباری با فشار، ظرفیت حیاتی دمی با فشار ، حجم دمی با فشار در ثانیه اول، نسبت حجم دمی با فشار در ثانیه اول بر ظرفیت حیاتی دمی با فشار و رکورد شنای 50 متر و 100 متر کرال سینه، در گروهی که تمرینات کنترل تنفس را انجام دادند است.نتیجه گیری: نتایج این پژوهش نشان می دهد که تمرین های هایپوکسی احتمالا با تأثیراتی که بر حجم های ریوی و عضلات تنفسی می گذارد، کارایی سیستم قلبی تنفسی را بالا برده و همچنین توانایی شناگرها را در حبس نفس در حین شناهای سرعتی افزایش داده و تأثیر بسزایی در رکورد شناگرهای سرعتی و بهبود عملکرد آنها بگذارد. تفاصيل المقالة
      • حرية الوصول المقاله

        21 - تاثیرتمرین هیپوکسی اینتروال در سطح دریا بر اشباع اکسیژن خون شریانی، مقدارهموگلوبین ، درصد هماتوکریت و ضربان قلب استراحتی کوهنوردان مبتلا به بیماری حاد کوهستان
        علیرضا علمیه هومن خانباباخانی بهمن رفیع زاده
        مقدمه: هدف از اجرای این تحقیق، بررسی تاثیر تمرینات هیپوکسی اینتروال بر اشباع اکسیژن شریانی، هموگلوبین، هماتوکریت و ضربان قلب استراحت کوهنوردان نیمه حرفه ای مبتلا بر بیماری حاد کوهستان بود. روش ها: نمونة آماری این تحقیق را 30 نفر از کوهنورادن نیمه حرفه‌ای استان گیلان (سن أکثر
        مقدمه: هدف از اجرای این تحقیق، بررسی تاثیر تمرینات هیپوکسی اینتروال بر اشباع اکسیژن شریانی، هموگلوبین، هماتوکریت و ضربان قلب استراحت کوهنوردان نیمه حرفه ای مبتلا بر بیماری حاد کوهستان بود. روش ها: نمونة آماری این تحقیق را 30 نفر از کوهنورادن نیمه حرفه‌ای استان گیلان (سن 05/2±66/27 سال، شاخص توده بدن 51/1±18/25 کیلوگرم بر مترمربع) تشکیل دادند. افراد مورد تحقیق در دو گروه تجربی (15=n) و کنترل (15=n) قرار گرفتند. گروه تجربی هشت هفته تمرینات هیپوکسی اینتروال را انجام دادند و گروه کنترل هیچ برنامه تمرینی نداشتند. در تمرین هیپوکسی اینتروال ،آزمودنیها از طریق کنترل تنفس بطور آگاهانه و هدفمند به گونه ای تمرین کردند که دچار هیپوکسی در سلولها شدند. خون‌گیری از افراد برای تعیین هموگلوبین و هماتوکریت به‌عمل آمد. ضربان قلب و میزان اشباع اکسیژن خون سرخرگی با دستگاه پالس اکسی متر انگشتی و بیماری حاد کوهستان با پرسشنامه لیک لوئیس اندازه‌گیری شد. برای تجزیه و تحلیل داده‌ها از t همبسته و t مستقل استفاده شد.یافته ها: نتایج آزمون تی مستقل نشان داد هشت هفته تمرین هیپوکسی اینتروال اختلاف معنی‌داری در افزایش اشباع اکسیژن خون سرخرگی (000/0=p)، هموگلوبین (000/0=p)، هماتوکریت (000/0=p) و کاهش معنی‌داری در ضربان قلب استراحتی (000/0=p) و علاتم بیماری حاد کوهستان کوهنوردان آماتور گروه تجربی در مقایسه با گروه کنترل دارد (05/0>p).نتیجه گیری: تمرینات هیپوکسی اینتروال در سطح دریا تمرینی کارآمد جهت آماده سازی کوهنوردان نیمه حرفه‌ای برای قرار گرفتن در ارتفاعات بالا و جلوگیری از بیماری حاد کوهستان می باشد. تفاصيل المقالة
      • حرية الوصول المقاله

        22 - β-Cyclodextrin conjugated imidazolium cation: A neutral, eco-friendly and water-miscible dicationic ionic liquid in the regioselective ring opening of epoxides
        Fatemeh Moheiseni Ali Reza Kiasat
        The present study, for the first time, presents a feasible protocol for the preparation of β-cyclodextrin/ imidazolium based dicationic ionic liquid, [βCD/Im](OTs)2, and its application as an efficient and eco-friendly microvessel and host ionic liquid system أکثر
        The present study, for the first time, presents a feasible protocol for the preparation of β-cyclodextrin/ imidazolium based dicationic ionic liquid, [βCD/Im](OTs)2, and its application as an efficient and eco-friendly microvessel and host ionic liquid system for the regioselective ring opening of the epoxides in water. No evidence for the formation of diol by-products or side reactions, such as isomerization, epimerization and rearrangements was observed and 1,2-disubstituted products, β-azidoalcohols, β-cyanohydrins, and β-thiocyanohydrins, obtained in pure form. Short reaction time, easy reaction conditions, simple work-up procedure, high yield, reusability, and use of an eco-friendly catalyst are some of the striking features of the present protocol. تفاصيل المقالة
      • حرية الوصول المقاله

        23 - Regioselective conversion of epoxides to vicinal nitrohydrins catalyzed by silica-bound 3-{2-[poly(ethylene glycol)]ethyl}-substituted 1-methyl-1H-imidazol-3-ium bromide as a green and reusable catalyst under aqueous thermal conditions
        Neda Ayashi Mehdi Fallah-Mehrjardi Ali Reza Kiasat
        An environmentally benign procedure for the synthesis of vicinal nitrohydrins via the regioselective ring opening reaction of epoxides with nitrite anion using silica-bound 3-{2-[poly(ethylene glycol)]ethyl}-substituted 1-methyl-1H-imidazol-3-ium bromide as an effective أکثر
        An environmentally benign procedure for the synthesis of vicinal nitrohydrins via the regioselective ring opening reaction of epoxides with nitrite anion using silica-bound 3-{2-[poly(ethylene glycol)]ethyl}-substituted 1-methyl-1H-imidazol-3-ium bromide as an effective heterogeneous phase transfer catalyst was described. Short reaction time, high yield of products, simple work-up procedure, and recyclability of the catalyst were some of the striking features of the present protocol. The recovered catalyst could be reused five times without any loss in its catalytic activity and selectivity. تفاصيل المقالة
      • حرية الوصول المقاله

        24 - Mn(II)-Schiff base complex immobilized onto MCM-41 matrix as a heterogeneous catalyst for epoxidation of alkenes
        Hassan Zakeri Saeed Rayati Goldasteh Zarei Ali Parsa Forogh Adhami
        A heterogeneous catalyst containing manganese Schiff base complex (derived from 2,4-dihydroxybenzadehyde and 1,2-phenylenediamine) is produced by covalent anchoring in MCM-41 matrix. The synthesized catalyst was characterized by X-ray diffraction pattern (XRD), inductiv أکثر
        A heterogeneous catalyst containing manganese Schiff base complex (derived from 2,4-dihydroxybenzadehyde and 1,2-phenylenediamine) is produced by covalent anchoring in MCM-41 matrix. The synthesized catalyst was characterized by X-ray diffraction pattern (XRD), inductivity coupled plasma (ICP), Fourier transform infrared (FT-IR) spectroscopy, N2 sorbtion-desorbtion isotherm and by transmission electron microscopy (TEM). The obtained catalyst was used in the epoxidation of alkenes with hydrogen peroxide. Furthermore, the effect of various parameters such as reaction time, temperature, amount of catalyst, oxidant and imidazole has been investigated. The catalyst reusability was investigated. Our result reveals that this catalyst shows high catalytic activity in the epoxidation of alkenes. تفاصيل المقالة
      • حرية الوصول المقاله

        25 - Manganese porphyrin supported on activated carbon as a new catalyst for epoxidation of alkenes with hydrogen peroxide
        Saeed Rayati Makan Etefagh Majid Masteri-Farahani
        The Manganese complex of meso-tetrakis (4-carboxyphenyl) porphyrin was immobilized onto the surface of functionalized activated carbon and used as a heterogeneous catalyst for the oxidation of different alkenes. The heterogenized catalyst has been fully characterized us أکثر
        The Manganese complex of meso-tetrakis (4-carboxyphenyl) porphyrin was immobilized onto the surface of functionalized activated carbon and used as a heterogeneous catalyst for the oxidation of different alkenes. The heterogenized catalyst has been fully characterized using Ultraviolet–visible (UV-Vis), Fourier-transform infrared (FTIR), and atomic absorption spectroscopies as well as thermogravimetric analysis (TGA), scanning electron microscopy(SEM), and nitrogen adsorption-desorption (BET method) analyses. The Catalytic activity of the catalyst was investigated in the epoxidation of alkenes with H2O2 as a green oxidant. The influence of different parameters including time of reaction, molar ratio of catalyst, imidazole, and amount of oxidant on the efficiency of the catalyst was investigated.Complete conversion of the indene, α-methyl styrene, and 4-methyl styrene was achieved after 4 h at room temperature. تفاصيل المقالة
      • حرية الوصول المقاله

        26 - Synthesis and Characterization of Hybrid Dual Metallic Complexes of Schiff Base Containing (Cd and Mn/Fe/Co/Ni) Derived from Isatin and 1,4-Phenylenediamine As Novel Organometallic Catalysts for Rapid and Efficient Epoxidation of Alkenes
        Abeer Mohammed Jassim Alyass Khalaf Khallow
        In the current study, a new methodology for the epoxidation of alkenes was developed. In this regard, the required ligand was synthesized from the reaction of isatin and 1,4-phenylenediamine to afford (3Z,3'Z)-3,3'-(1,4-phenylenebis(azaneylylidene))bis(indolin-2-one) li أکثر
        In the current study, a new methodology for the epoxidation of alkenes was developed. In this regard, the required ligand was synthesized from the reaction of isatin and 1,4-phenylenediamine to afford (3Z,3'Z)-3,3'-(1,4-phenylenebis(azaneylylidene))bis(indolin-2-one) ligand. Then, the two coordinate ligands were metallated using Cd and Mn/Fe/Co/Ni to obtain a series of hybrid dual metallic complexes containing (Cd and Mn/Fe/Co/Ni). The prepared complexes were characterized using FT-IR spectroscopy, UV-Vis spectroscopy, CHNS analysis, and magnetic susceptibility. Then, the prepared hybrid dual metallic complexes containing (Cd and Mn/Fe/Co/Ni) are used in the epoxidation of different alkenes to afford corresponding epoxides in moderate to good yields. The synthesized complexes were checked relative to recoverability and leaching of metal to the medium of the reaction. تفاصيل المقالة
      • حرية الوصول المقاله

        27 - Efficient Epoxidation of Alkenes using New Organometallic Catalysts ((E)-2,6-dimethoxy-4-((2-(5-methyl-1,3,4-thiadiazol-2-yl)hydrazono)methyl)phenol M: Cr, Fe, Co, Cu): An Antimicrobial and Theoretical Study of Catalyst
        Rasha Mahmood Mohammed Abowd Asmaa Sabti
        In this research, a novel approach for the epoxidation of alkene derivatives was constructed. Based on this fact, the appropriate ligand was provided from the reaction of hydrazine hydrate and 5-methyl-1,3,4-thiadiazole-2-thiol. Then, after preparation of the intermedia أکثر
        In this research, a novel approach for the epoxidation of alkene derivatives was constructed. Based on this fact, the appropriate ligand was provided from the reaction of hydrazine hydrate and 5-methyl-1,3,4-thiadiazole-2-thiol. Then, after preparation of the intermediate compound, the treatment of the pointed compound and 4-hydroxy-3,5-dimethoxybenzaldehyde in the presence of a few drops of glacial acetic acid for 3h was done in order to a final ligand. Then, the synthesized ligand was metallated using Cr, Fe, Co, and Cu to obtain a series of organometallic catalysts. The synthesized organometallic catalysts were analyzed using CHNS analysis, FT-IR spectroscopy, and magnetic susceptibility. Then, the organometallic complexes containing (Chromium, Iron, Cobalt, and Copper) are applied in the epoxidation of various alkenes to provide corresponding target products and provide moderate to good yields. The prepared organometallic complexes were investigated relative to the reusability and loss of metal into the medium of the reaction. In addition, the optimized chemical structures of organometallic complexes were investigated using DFT calculation. تفاصيل المقالة
      • حرية الوصول المقاله

        28 - B-podands as efficient catalysts for the ring opening of epoxides in water: A versatile and atom economical method for the synthesis of vicinal azidoalcohols
        Ali Kiasat Fakhri Ataeian Mehdi Fallah-Mehrjardi
        For the first time B-podands have been studied as an efficient and powerful catalysts in the ring opening of epoxides with azide anion in water. The reaction afforded the corresponding 1,2-azidoalcohols with high regioselectivity under mild reaction conditions and in a أکثر
        For the first time B-podands have been studied as an efficient and powerful catalysts in the ring opening of epoxides with azide anion in water. The reaction afforded the corresponding 1,2-azidoalcohols with high regioselectivity under mild reaction conditions and in a highly atom economic fashion. تفاصيل المقالة
      • حرية الوصول المقاله

        29 - Disulfide catalyzed the highly regioselective conversion of epoxides to halohydrins with elemental halogens
        Hossein Eshghi Zaiddodine Pashandi Gholam Hossein Rounaghi Afsaneh Alipour Azadeh Shafaie
        The regioselective ring opening of styrene oxide using elemental iodine and bromine in the presence of disulfides as new catalysts was studied. The conductivity titration and UV spectroscopy were used to study the interaction of iodine with these catalysts. The results أکثر
        The regioselective ring opening of styrene oxide using elemental iodine and bromine in the presence of disulfides as new catalysts was studied. The conductivity titration and UV spectroscopy were used to study the interaction of iodine with these catalysts. The results indicate that disulfide 11 is efficient in polyiodide formation, and can catalyze this reaction in excellent yield and high regioselectivity. The complex [(11-disulfide)I]+.I3- is considered to be formed initially which could be bulkier by addition of excess of iodine in the course of the reaction. These bulky nucleophiles have a fundamental role in the high regioselectivity by attacking the less sterically hindered epoxide carbon. تفاصيل المقالة
      • حرية الوصول المقاله

        30 - The effect of talc, kaolin, and zinc oxide on heat stress in pomegranate cv. Malas saveh
        Masoud Nazeri Seyed Jalal Tabatabaei Nasrin  Mollayi
        Sunburn is one of the significant problems in pomegranate growing, which reduces fruit yield and quality. This study was conducted to evaluate the impact of the application of antiperspirants on the quality and biochemical properties of pomegranate fruits. The experimen أکثر
        Sunburn is one of the significant problems in pomegranate growing, which reduces fruit yield and quality. This study was conducted to evaluate the impact of the application of antiperspirants on the quality and biochemical properties of pomegranate fruits. The experiment was carried out as a completely randomized design with nine treatments and three replications. Treatments include 2% solution talc (T), zinc oxide (ZnO), kaolin (K), zinc oxide+talc (ZnT), talc+kaolin (TK), zinc oxide+kaolin (ZnT), zinc oxide+talc+kaolin (ZnTK), shading with 50% light passing and control (sprayed with water). The highest edible fruit was measured in the ZnO treatment. The maximum and minimum thickness of fruit peel was measured in the control and shading treatments, respectively. ZnO treatment reduced the thickness of the fruit peel by 30.8% compared to the control. The lowest temperature of fruit and leaf was measured in shading and ZnT treatment, respectively. The control treatment produced the lowest Fv/Fm and leaf area, (LA), and the shading treatment resulted the highest Fv/Fm, LA and chlorophyll. ZnO treatment increased Fv/Fm and LA by 11.95% and 15.55%, respectively, compared to the control. The highest anthocyanin and phenol of juice were recorded in shading treatment. The highest fruit peel phenol and the lowest fruit peel lipoxygenase activity were measured in the ZnTK treatment. The results indicated that the ZnO treatment is a suitable treatment due to the decrease in the percentage of fruit peel and the increase in the Fv/Fm and the decrease in the activity of the lipoxygenase enzyme. تفاصيل المقالة
      • حرية الوصول المقاله

        31 - SDN-based Defending Against ARP Poisoning Attack
        Zeynab Sasan Majid Salehi
        In the field of computer networks, the introduction of SDN has been associated with new concepts. In SDN networks, control plane is separated from the data palne. Traditional networks suffer from difficult configuration and management. In other words, a change in the ne أکثر
        In the field of computer networks, the introduction of SDN has been associated with new concepts. In SDN networks, control plane is separated from the data palne. Traditional networks suffer from difficult configuration and management. In other words, a change in the network needs to be configured on the whole equipment. With the introduction of SDN, various modules can be designed and run in controller in order to perform expected policies and rules on all switches. One of the areas of network management is to deal with cyber-attacks. In SDN networks, security modules can be designed to run in the controller and generate rules on switches. Due to the importance of intranets, this paper aimed to detect and prevent ARP poisoning attack on LAN. The tests in a LAN showed that the module can detect the ARP poisoning attack and block the attacker operation. تفاصيل المقالة
      • حرية الوصول المقاله

        32 - Delaying of Postharvest Senescence of Lisianthus Cut Flowers by Salicylic Acid Treatment
        Davoud Ataii Roohangiz Naderi Azizollah Khandan-Mirkohi
        Salicylic acid (SA) is considered to be plant signal molecule that plays a key role in plant growth, development, and defense responses. The physiological mechanism of exogenous SA to affect the senescence of cut lisianthus flowers during vase life was investigated. Fre أکثر
        Salicylic acid (SA) is considered to be plant signal molecule that plays a key role in plant growth, development, and defense responses. The physiological mechanism of exogenous SA to affect the senescence of cut lisianthus flowers during vase life was investigated. Fresh cut lisianthus flowers were treated with distilled water (control), 0.5, 1 and 2 mM SA and then held at 25◦C up to 12 days. Exogenous SA supply at 1 mM extended vase life, which was associated with reduced electrolyte leakage and MDA content.SA treatment also reduced activity of lipoxygenase (LOX), which is responsible for membrane lipid peroxidation. SA treatment also enhanced activities of catalase (CAT) and ascorbate peroxidase (APX) and decreased H2O2 accumulation during vase life. Thus, exogenous SA supply could maintain membrane integrity by increasing antioxidant system activity, thereby retarding the senescence of cut lisianthus flower during vase life. تفاصيل المقالة
      • حرية الوصول المقاله

        33 - Exogenous Putrescine Delays Senescence of Lisianthus Cut Flowers
        Davoud Ataii Roohangiz Naderi Azizollah Khandan-Mirkohi
        The anti-senescence biogenic polyamines (PAs) putrescine (Put), spermidine(Spd) and spermine (Spm) are involved in plant growth processes andresponses to stress. The physiological mechanism of exogenous Put to affectthe senescence of cut lisianthus flowers during vase l أکثر
        The anti-senescence biogenic polyamines (PAs) putrescine (Put), spermidine(Spd) and spermine (Spm) are involved in plant growth processes andresponses to stress. The physiological mechanism of exogenous Put to affectthe senescence of cut lisianthus flowers during vase life was investigated.Fresh cut lisianthus flowers were treated with distilled water (control), 0.5, 1and 2 mM Put and then held at 25 ◦C up to 12 days. Exogenous Put supply at2 mM extended vase life, which was associated with reduced electrolyteleakage and MDA content. Put treatment also reduced activity of lipoxygenase(LOX), is responsible for membrane lipid peroxidation. Put treatment also enhancedactivities of catalase (CAT) and ascorbate peroxidase (APX) anddecreased H2O2 accumulation during vase life. Thus, exogenous Put supplycould maintain membrane integrity by increasing antioxidant system activity,thereby retarding the senescence of cut lisianthus flower during vase life. تفاصيل المقالة
      • حرية الوصول المقاله

        34 - بررسی تاثیر داروی کلردیازپوکساید در زمان بارداری بر بیان ژن bad در هیپوکمپ نوزادان موش
        امین دیناروند مهرداد هاشمی رسول دیناروند شبنم موثقی مجتبی جعفری نیا
        مقدمه: کلرودیازپوکساید یک داروی ضد اضطراب است که معمولا توسط جوانان و زنان باردار برای کاهــش اضطراب و کنترل پره اکلامپسی و اکلامپسی مورد استفاده قرار می گیرد. برخی مطالعات نشان داده که این دارو باعث اختلال در عملکرد سیستم عصبی کولینرژیک می شود.با توجه افزایش بیان ژن ba أکثر
        مقدمه: کلرودیازپوکساید یک داروی ضد اضطراب است که معمولا توسط جوانان و زنان باردار برای کاهــش اضطراب و کنترل پره اکلامپسی و اکلامپسی مورد استفاده قرار می گیرد. برخی مطالعات نشان داده که این دارو باعث اختلال در عملکرد سیستم عصبی کولینرژیک می شود.با توجه افزایش بیان ژن bad متعاقب آسیب سلولی در این مطالعه اثر مصرف کلرودیازپوکساید در دوران بارداری بر روی بیان ژن bad در هیپوکمپ نوزادان موش صحرایی بررسی شد. مواد وروش ها: در این مطالعه 9 رأس موش ماده نژاد ویستار باردار شده و به طور تصادفی به سه گروه: کنترل، آزمایشی (تزریق داخل صفاقی روزانه کلردیازپوکساید با دوز mg/kg 10 به مدت 21 روز) و حامل (سالین) تقسیم شدند. 2 هفته پس از تولد، مغز نوزادان از جمجمه خارج و بیان ژن پروآپوپتوتیک badمورد بررسی قرار گرفت. نتایج : میزان بیان ژن با استفاده از نرم افزار آماریRest مورد تجزیه و تحلیل قرار گرفته و سطح معنی داری P نتیجه گیری کلی: نتایج مطالعه حاکی از آن بود که دریافت کلرودیازپوکساید در دوران بارداری می تواند موجب آسیب نورونی در هیپوکمپ نوزادان موش صحرایی نژاد ویستار گردد. تفاصيل المقالة
      • حرية الوصول المقاله

        35 - بررسی رفتار گرمایی و خوردگی رزین اپوکسی پخت شده با پلی‌زانتون آمید و نانوذره های آهن عامل دارشده
        قاسم راه پیما
        باتوجه به ویژگی های بسیار مناسب پلی زانتون ها، در این پژوهش، پخت، تخریب گرمایی و فعالیت ضدخوردگی رزین اپوکسی با پلی (زانتون-آمید) (PXAO) به عنوان عامل پخت و همچنین، ترکیب آن ها با نانوذره های آهن عامل دارشده با ملامین (m-Fe3O4) بررسی شد. سینتیک پخت این سامانه ها با ر أکثر
        باتوجه به ویژگی های بسیار مناسب پلی زانتون ها، در این پژوهش، پخت، تخریب گرمایی و فعالیت ضدخوردگی رزین اپوکسی با پلی (زانتون-آمید) (PXAO) به عنوان عامل پخت و همچنین، ترکیب آن ها با نانوذره های آهن عامل دارشده با ملامین (m-Fe3O4) بررسی شد. سینتیک پخت این سامانه ها با روش گرماسنجی روبشی تفاضلی (DSC) به طریقه دینامیک بررسی شد. عامل های سینتیکی مانند انرژی فعال سازی (Ea) و ثابت سرعت (K) با استفاده از روش های کیسینجر و ازاوا- فلین- وال محاسبه شد. رفتار کاهش جرم (شامل دماهای کاهش جرم و Ea) و پایداری گرمایی با روش تجزیه وزن سنجی گرمایی (TGA) مشخص شد. نتیجه ها، انرژی فعال سازی و باقی مانده تخریب بالاتر را (از 35 تا 43 %) در C°750 در اتمسفر نیتروژن برای سامانه های با نانوذره ها در مقایسه با سامانه های بدون نانوذره عامل دار نشان داد. نتیجه های آزمایش های بسپارش پتانسیودینامیک برای ارزیابی عملکرد خوردگی فولاد زنگ نزن پوشش داده شده با رزین اپوکسی، نشان داد که پلی زانتون آمید مقاومت خوردگی رزین اپوکسی را افزایش می دهد. همچنین، افزایش نانوذره های آهن عامل دارشده به مخلوط پخت، به دلیل افزایش مسیر نفوذ آب و اکسیژن فعالیت پادخوردگی رزین اپوکسی را به میزان قابل توجهی بهبود می بخشد. تفاصيل المقالة
      • حرية الوصول المقاله

        36 - Influence of nano graphene on water absorption in polyester/vinylester blend gel coats
        Zeinab Rajabtabar Morteza Ehsani Azam Ghadami Yasser Amani
        Water absorption characteristics of composite materials and gel coats are crucial for their applications in marine industry. The physical and mechanical properties of composite parts are influenced by moisture. Water absorption of five gel coat compositions based on epo أکثر
        Water absorption characteristics of composite materials and gel coats are crucial for their applications in marine industry. The physical and mechanical properties of composite parts are influenced by moisture. Water absorption of five gel coat compositions based on epoxy vinylester resin and neopentylglycol unsaturated polyester resin and their blends was studied in this work. The influence of nanographene addition on the water absorption of these gel coats was also investigated. The results showed that epoxyvinylester resin had the lowest and neophentylglycol unsaturated polyester resin had the highest water absorption levels, and their blends, as expected, showed the same behavior. TEM, SEM and XRD were used to analyze and characterize the dispersion and distribution of nanographene particles in the polymer matrices. The results showed both dispersed and non-dispersed flakes in the polymer matrices. It was also shown that the addition of nanographene resulted in gel coats with lower water absorption levels. تفاصيل المقالة
      • حرية الوصول المقاله

        37 - بررسی وجود ژن کد کننده اسکوالن اپواکسیداز در قارچ درماتوفیت ترایکوفایتون ویولاسئوم
        فاطمه نوربخش مهدی میررحیمی ساسان رضایی هاتف آجودانی فر
        سابقه و هدف: ترایکوفایتون ویولاسئوم یک قارچ درماتوفیت است که پوست، ناخن و موی انسان را مورد تهاجم قرار می دهد. اما مطالعات کمی بر روی زیست شناسی مولکولی این قارچ انجام شده است. این مطالعه با هدف بررسی حضور ژن کد کننده اسکوالن اپواکسیداز در قارچ ترایکوفایتون ویولاسئوم ان أکثر
        سابقه و هدف: ترایکوفایتون ویولاسئوم یک قارچ درماتوفیت است که پوست، ناخن و موی انسان را مورد تهاجم قرار می دهد. اما مطالعات کمی بر روی زیست شناسی مولکولی این قارچ انجام شده است. این مطالعه با هدف بررسی حضور ژن کد کننده اسکوالن اپواکسیداز در قارچ ترایکوفایتون ویولاسئوم انجام شده است. مواد و روش ها: این مطالعه به صورت مقطعی بر روی قارچ ترایکوفایتون ویولاسئوم جدا شده از بیماران مراجعه کننده به بخش قارچ شناسی دانشگاه علوم پزشکی تهران با علایم کچلی، انجام گردید. پس از استخراج DNA، به کمک پرایمرهای اختصاصی، ژن کد کننده اسکوالن اپواکسیداز با روش PCR تکثیر و توالی آمینواسیدی آن با روش تعیین توالی مشخص گردید. یافته ها: الکتروفورز محصول PCR حضور قطعه حدود 600 جفت بازی، تایید کننده تکثیر ژن اسکوالن اپوکسیداز را نشان داد. این توالی با شماره دسترسیJX869101 در پایگاه جهانی ژن (NCBI) ثبت گردید. این قطعه، پروتئینی با 220 آمینو اسید را رمز می نماید. مقایسه توالی این ژن با سایر ژن های موجود در بانک های اطلاعات ژنتیکی، همسانی بالا و معنی دار آن را با سایر ژن های کد کننده پروتئین آنزیم اسکوالن اپوکسیداز در قارچ ها و یوکاریوت های دیگر نشان داد. نتیجه گیری: نتایج این پژوهش نشان داد که توالی اسیدآمینه که پروتئین را می سازد حدود 78 درصد با توالی اسکوالن اپواکسیداز سایر قارچ ها تشابه دارد. تفاصيل المقالة
      • حرية الوصول المقاله

        38 - Effect of Different Concentrations of Brassinosteroid on Physiomorphological Charac-teristics of Five Pistachio Genotypes (Pistacia vera. L)
        E. Farazi H. Afshari H. Hokm Abadi
        Brassinosteroid as one of steroid hormones has an integral role in controlling plants physiological process especially in response to biological and non-biological stress. This research has been done in Damghan Islamic Azad University Greenhouse. The influence of four c أکثر
        Brassinosteroid as one of steroid hormones has an integral role in controlling plants physiological process especially in response to biological and non-biological stress. This research has been done in Damghan Islamic Azad University Greenhouse. The influence of four concentrations of plant growth regulator -24, homobrassinolide with concentration of 0,10-10, 10-8,10-6 molar on null seedlings of pistachio genotype sort based on factorials experiments on the basis of completely randomized block design with four replications was performed. After foliar spraying in six -leaves stage of pistachio seedlings and after passing six weeks, somephysio-morphplogical characteristics such as the size of photosynthesis pigments, leaf area index, seedlings height, biomass (the wet and dry weight of root and shoot), and lipoxygenase enzymes were scrutinized.The result indicated that foliar spraying experiment with brassinosteroid hormones had significant effect on some evaluated traits (P). Maximum leaf area index with concentration of 10-10 brassinosteroid and genotype G1, and the minimum leave area index with untreated (control) and genotype G5 were achieved. In biomass scrutiny, the wet weigh of aerial organs in level 1% was significant (5% level).The maximum weight of the wet weigh in concentration, 10-10 and the minimum weight in concentration of control and 10-6 were observed. Besides, the fresh weight of root in level 1% was significant, and the maximum weight with concentration of 10-10and genotype G (22%) and minimum weight with control concentration and genotype G1 were observed. The maximum amount of lipoxygenase was related to concentration of 10-10, and genotype G2 and the minimum amount was related to null concentration of brassinosteroid hormones and genotype G1. تفاصيل المقالة
      • حرية الوصول المقاله

        39 - Kinetic study of cis-polybutadiene epoxidation by using 1HNMR spectroscopy in buffered oxone® solution with tetra-n-butyl ammonium bromide as phase transfer catalyst (PTC)
        Farzaneh Hossein Poor Rajabi Mir Mohammad Alavi Nikje Bahman Vasheghani Farahani Narges Sabouri
        Cis-polybutadiene was functionalized using in–situ generated DMD as oxidant and tetra-n-butyl ammonium bromide as phase transfer catalyst (PTC). The epoxidation process was investigated by 1HNMR spectroscopy. 1HNMR spectrum analysis of products confirms the absenc أکثر
        Cis-polybutadiene was functionalized using in–situ generated DMD as oxidant and tetra-n-butyl ammonium bromide as phase transfer catalyst (PTC). The epoxidation process was investigated by 1HNMR spectroscopy. 1HNMR spectrum analysis of products confirms the absence of ring opening side products in epoxidation reaction. Various factors such as reaction temperature, reaction time and the concentrations of oxidant, PTC and polymer are also examined in detail. Kinetic study showed that the catalytic epoxidation reaction of cis-polybutadiene is first-order with respect to double bonds and activation energy for the reaction is 22.82 KJ/mol. تفاصيل المقالة
      • حرية الوصول المقاله

        40 - Alkali metal ion select ability of di-propoxy- p-tert-butyl-Calix[4]arene, synthesized in acetonitrile
        Afsaneh Amiri Mahshid Nikpour Nezhati
        Synthesis and cation selectivity of 25, 27, dipropoxy-26, 28, Di-propoxy 5, 11, 17, 23, ptert-butyl Calix[4]arene are studied in acetonitrile solution. The stability constants of differentcomplexes of Calixarene (as a ligand) with alkali metal cations are determined at أکثر
        Synthesis and cation selectivity of 25, 27, dipropoxy-26, 28, Di-propoxy 5, 11, 17, 23, ptert-butyl Calix[4]arene are studied in acetonitrile solution. The stability constants of differentcomplexes of Calixarene (as a ligand) with alkali metal cations are determined at 25 °C by usingspectrophotometric technique.On the basis of calculations, complexation of Calixarene with Cs+and Li+ are more favored than others. In all cases, it has been shown to form exclusively 1:1(metal ion to ligand) complex with alkali cations in experimental condition. تفاصيل المقالة
      • حرية الوصول المقاله

        41 - Kinetic study of unsaturated ketones epoxidation with hydrogen peroxide through the inverse phase transfer catalysis and effect of ultrasonic waves in this epoxidation
        Mohammad Taghi Taghizadeh Tahere Shaidaii Narges Sabouri
        Kinetic study of epoxidation of unsaturated ketone of mesityl oxide was studied by usingHydrogen peroxide in the presence of dodecyltrimethyl ammonium bromide (DTAB) as aninverse phase transfer catalyst. The reaction was carried out in the two-phase media of waterheptan أکثر
        Kinetic study of epoxidation of unsaturated ketone of mesityl oxide was studied by usingHydrogen peroxide in the presence of dodecyltrimethyl ammonium bromide (DTAB) as aninverse phase transfer catalyst. The reaction was carried out in the two-phase media of waterheptanewith 1:1 ratio in 25 °C. It was found that the order of reaction for mesityl oxide forketone concentration in the range of 0.03- 0.1 mol L-1 are 0.8906. And also with regard tocatalyst concentrations in the range of 0.07- 0.2 mol L-1, the order of reaction for catalyst is0.1205. The order of reaction of Hydrogen peroxide in the range o of 1.5-4 mol L-1 concentrationfor mesityl oxide is –0.1411. The activation energy of the reaction is 27.51 kJ mol-1 in therestricted temperature between 10-25 °C and it was observed that reaction rate enhances bytemperature increase. As the phase transfer catalyst depends strongly on mass transfer betweentwo phases, it is well understood that ultrasonic waves have a greater efficiency of interfacemixing than conventional agitation. So, in this research the effect of ultrasonic waves incomparison with magnetic stirrer was studied. The results showed that an ultrasonic waveaccelerates on the reaction. تفاصيل المقالة
      • حرية الوصول المقاله

        42 - تأثیر درصد تقویت کننده و توزیع آن بر رفتار مکانیکی کامپوزیت پایه اپوکسی تقویت شده با آلومینا
        محمدحسین بینا کوروش شیروانی حمید رضا سلیمی جزی
        در این مقاله خواص برشی و کششی کامپوزیت پایه اپوکسی تقویت شده با ذرات آلومینا بررسی شده است. به این منظور ابتدا نمونه های کامپوزیتی با درصدهای وزنی متفاوت از ذرات آلومینا (10 تا 50 درصد) تولید گردید. سپس جهت ارزیابی خواص برشی و کششی نمونه های کامپوزیتی از آزمون پانچ برشی أکثر
        در این مقاله خواص برشی و کششی کامپوزیت پایه اپوکسی تقویت شده با ذرات آلومینا بررسی شده است. به این منظور ابتدا نمونه های کامپوزیتی با درصدهای وزنی متفاوت از ذرات آلومینا (10 تا 50 درصد) تولید گردید. سپس جهت ارزیابی خواص برشی و کششی نمونه های کامپوزیتی از آزمون پانچ برشی و برای بررسی پراکندگی و توزیع ذرات آلومینا، فصل مشترک ذرات/ زمینه و سطح مقطع شکست نمونه‌ها از میکروسکوپ الکترونی روبشی (SEM) مجهز به آنالیزگر EDS استفاده شد. نتایج آزمون‌ها نشان داد که افزودن آلومینا تا میزان 30 درصد منجر به توزیع همگن و یکنواخت و استحکام برشی بیشتر کامپوزیت می‌گردد. اما هنگامی‌که میزان تقویت کننده بیش از 30 درصد باشد، میزان تجمع ذرات بیشتر شده و به تبع آن استحکام کامپوزیت کاهش می‌یابد. همچنین تفاوت قابل توجهی بین سطح مقطع شکست اپوکسی خالص و کامپوزیت ها مشاهده شد. برخلاف پلیمر خالص، سطح مقطع شکست کامپوزیت های تقویت شده با آلومینا (تا 30 درصد) ناهموارتر بود، که حکایت از افزایش زبری سطح در اثر انحراف ترک دارد. شکست در کامپوزیت‌های تقویت شده با درصدهای بالاتر از 30 درصد نیز به علت میزان ترشوندگی کم ذرات آلومینا با رزین اپوکسی در تماس‌های ذره – ذره اتفاق افتاده است. تفاصيل المقالة
      • حرية الوصول المقاله

        43 - ارزیابی عملکرد ضد خوردگی پوشش اپوکسی استر در حضور نسل جدید رنگدانه‌های هیبریدی تشکیل یافته از عصاره گل‌گاوزبان و استات روی
        امیرسالار دهقانی مهدی طباطبایی ,وحید ابوئی مهریزی
        در این مطالعه تأثیر رنگ‌دانه آلی/معدنی هیبریدی بر پایه عصاره گل‌گاوزبان و استات روی بر خواص خوردگی پوشش اپوکسی استر بررسی شد. نتایج طیف‌سنجی امپدانس الکتروشیمیایی (EIS) نشان داد که خوردگی فولاد به‌طور قابل‌توجهی در محلول کلرید در حضور رنگ‌دانه هیبریدی ممانعت می‌شود. نتا أکثر
        در این مطالعه تأثیر رنگ‌دانه آلی/معدنی هیبریدی بر پایه عصاره گل‌گاوزبان و استات روی بر خواص خوردگی پوشش اپوکسی استر بررسی شد. نتایج طیف‌سنجی امپدانس الکتروشیمیایی (EIS) نشان داد که خوردگی فولاد به‌طور قابل‌توجهی در محلول کلرید در حضور رنگ‌دانه هیبریدی ممانعت می‌شود. نتایج به‌دست‌آمده از میکروسکوپ الکترونی روبشی (SEM)، طیف‌سنجی اشعه ایکس فوتوالکترون (XPS)، طیف‌سنجی مادون‌قرمز تبدیل فوریه (FTIR)، آزمون طیف‌سنج مرئی فرابنفش (UV-Vis) و زاویه تماس استاتیک تشکیل کی‌لیت‌ها و کمپلکس‌های بازدارنده خوردگی در ساختار رنگ‌دانه را تائید کرد. نتایج نشان داد حضور رنگ‌دانه هیبریدی نه تنها سدی در برابر نفوذ عوامل خورنده بود، بلکه خواص بازدارندگی فعال پوشش اپوکسی استر را نیز به‌طور مؤثری افزایش داد. بازده بازدارندگی % 3/89 همین نکته را نشان می‌دهد. مقدار امپدانس فرکانس پایین پوشش اپوکسی استر در غیاب و حضور رنگ‌دانه هیبریدی به ترتیب از MΩ cm2 344 به MΩ cm2 6056 افزایش یافت. این پارامتر پس از 45 روز برای نمونه خام و حاوی رنگدانه به ترتیب MΩ cm2 2/4 و MΩ cm2 200 محاسبه شد که نشان‌دهنده نقش رنگ‌دانه در افزایش عملکرد سدی پوشش است. افزایش مقاومت کلی معادل Ω cm2 16343 پوشش اپوکسی استر حاوی رنگ‌دانه با خراش مصنوعی نقش بازدارندگی فعال رنگ‌دانه هیبریدی را نشان می‌دهد. تفاصيل المقالة
      • حرية الوصول المقاله

        44 - تاثیر سه هفته بی‌تمرینی متعاقب شش هفته تمرین اینتروال فزآینده بر سطوح HIF-1a و آپوپتوز برونش و برونشیول بافت ریه رت‌های نر ویستار
        صابر نیازی شادمهر میردار رضا بذار غلامرضا حمیدیان
        تمرین اینتروال فزآینده با افزایش التهاب همراه است. از این رو هدف از مطالعه حاضر بررسی تاثیر بی تمرینی کوتاه مدت متعاقب 6 هفته تمرین اینتروال فزآینده بر سطوح فاکتور القایی هیپوکسی و آپوپتوز برونش و برونشیول بافت ریه رت های نر ویستار بود. برای این منظور 18 سر رت نر نژاد و أکثر
        تمرین اینتروال فزآینده با افزایش التهاب همراه است. از این رو هدف از مطالعه حاضر بررسی تاثیر بی تمرینی کوتاه مدت متعاقب 6 هفته تمرین اینتروال فزآینده بر سطوح فاکتور القایی هیپوکسی و آپوپتوز برونش و برونشیول بافت ریه رت های نر ویستار بود. برای این منظور 18 سر رت نر نژاد ویستار سالم (4 هفته ای با میانگین وزنی 9 ± 72 گرم) به دو گروه تجربی (12 سر) و کنترل (6 سر) تقسیم شدند، پس از 6 هفته تمرین اینتروال فزآینده که بصورت چهار جلسه در هفته در مرحله آماده سازی و پنج جلسه در طول اجرای برنامه پژوهش انجام شد. برنامه تمرین تناوبی فزآینده با سرعت 25 متر بر دقیقه (VO2max 66 درصد) شروع و با سرعت 70 متر بر دقیقه (VO2max 185 درصد) در پایان هفته ششم اتمام یافت. تعداد شش سر از رت های گروه تجربی به گروه بی تمرین(6 سر) انتقال یافته و به مدت سه هفته در شرایط بی تمرینی نگهداری شدند. جهت اندازه گیری میزان HIF-1α و آپوپتوز برونش و برونشیول، در پایان هفته نهم نمونه بافت ریه خارج و مورد سنجش قرار گرفت. برای تحلیل داده ها از روش آماری آنالیز واریانس یک طرفه در سطح معنی داری (05/0≥ p) استفاده شد. یافته ها نشان داد که در شرایط بی تمرینی علی رغم افزایش معنی داری در میزان HIF-1α و آپوپتوز برونش و برونشیول ریه (05/0≥p ) در دوره تمرین اینتروال فزآینده، کاهش معنی داری (05/0≥p ) در میزان HIF-1α، آپوپتوز برونش و برونشیول بافت ریه مشاهده شد. به نظر می رسد انجام تمرینات اینتروال فزآینده با افزایش میزان HIF-1α و آپوپتوز برونش و برونشیول ریه همراه است که در بی تمرینی از مقدار آنها کاسته می شود. تفاصيل المقالة
      • حرية الوصول المقاله

        45 - تاثیر ورزش در دوران بارداری بر کاهش تغییرات هیستومورفومتریک مغز ناشی از هیپوکسی-ایسکمی نوزادی
        الهه گرگیج پریچهره یغمایی حامد فنائی محمدرضا شهرکی هادی میراحمدی
        هیپوکسی در طی دوران بارداری سبب اختلال در تکامل و عملکرد مغز جنین می‌شود. ورزش در دوران بارداری سبب کاهش استرس اکسیداتیو، التهاب، آپوپتوز شده و در بهبود حافظه موثر می‌باشد. این مطالعه به‌منظور تعیین تاثیر ورزش در دوران بارداری مادران چاق برای کم کردن هیپوکسی-ایسکمی نوزا أکثر
        هیپوکسی در طی دوران بارداری سبب اختلال در تکامل و عملکرد مغز جنین می‌شود. ورزش در دوران بارداری سبب کاهش استرس اکسیداتیو، التهاب، آپوپتوز شده و در بهبود حافظه موثر می‌باشد. این مطالعه به‌منظور تعیین تاثیر ورزش در دوران بارداری مادران چاق برای کم کردن هیپوکسی-ایسکمی نوزادی، برروی موش‌های صحرایی نژاد ویستار باردار انجام شد. در این مطالعه، موش‌های صحرایی باردار ویستار طبیعی و چاق در شش گروه طبقه‌بندی شدند. برخی از گروه‌ها در دوران بارداری تحت ورزش قرار گرفتند. هشت روز پس از زایمان، سه گروه از نوزادان تحت القای هیپوکسی-ایسکمی با عمل جراحی قرار گرفته و شریان کاروتید مشترک راست آن‌ها مسدود گردید. سپس، در معرض اکسیژن 8 درصد به مدت 90 دقیقه قرار گرفتند. هفت روز پس از القای هیپوکسی-ایسکمی، آزمایش‌های عصبی-رفتاری انجام شد. نوزادان در پایان مطالعه (روز پانزدهم پس از تولد) ‌کشته شده و پس از برداشتن بافت مغز نوزادان از جمجمه، اینترلوکین-6، ادم مغزی، حجم انفارکتوس، فاکتورهای آپوپتوز آن‌ها اندازه‌گیری شد. داده‌ها با استفاده از آنالیز واریانس یک طرفه و آزمون تعقیبیتوکی تجزیه و تحلیل شدند. براساس نتایج بدست آمده، موش‌های صحرایی تازه متولد شده از مادران چاق ورزش کرده نسبت به موش‌های صحرایی تازه متولد شده از مادران چاق که در دوران بارداری ورزش نکرده بودند عملکرد عصبی رفتاری و بیان ژن Bcl2 بهتر (000/0 =p ) و حجم انفارکتوس، سطح ادم، بیان ژن BAX و اینترلوکین-6 به‌طور قابل توجهی کمتر داشتند (000/0 =p ). بنابراین ورزش مادران در دوران بارداری اثرات مفیدی در برابر آسیب هیپوکسی-ایسکمی در نوزادان موش صحرایی نشان داد. تفاصيل المقالة
      • حرية الوصول المقاله

        46 - بررسی تاثیر شرایط هایپوکسی بر تکوین رویان های دوسلولی موش نژاد NMRI
        دیبا باقری مجتبی دشتی زاد مرتضی دلیری جوپاری احسان هاشمی آیدین رحیم طایفه
        تکوین رویان در شرایط آزمایشگاهی، وابسته به پارامتر های متعددی است که از میان آن ها می توان به میزان اکسیژن محیط کشت اشاره نمود. کشت رویان در شرایط محیطی با میزان بالای اکسیژن می تواند منجر به تولید گونه های فعال اکسیژن شود و در نتیجه آسیب های احتمالی را برای رویان به هم أکثر
        تکوین رویان در شرایط آزمایشگاهی، وابسته به پارامتر های متعددی است که از میان آن ها می توان به میزان اکسیژن محیط کشت اشاره نمود. کشت رویان در شرایط محیطی با میزان بالای اکسیژن می تواند منجر به تولید گونه های فعال اکسیژن شود و در نتیجه آسیب های احتمالی را برای رویان به همراه داشته باشد. بررسی های پیشین نشان داده است که مرحله ی پره نوکلئوس مرحله ای حیاتی در نمو رویان می باشد که نسبت به میزان اکسیژن محیط حساس است و با شروع کشت از مراحل بعدی ممکن است این اثرات مخرب اکسیژن اتمسفری ناپدید شود. جهت بررسی دقیق تر این موضوع، مطالعه حاضر کشت رویان ها از مرحله ی دو سلولی تا مرحله ی بلاستوسیست را مد نظر قرار داده است و کیفیت رویان ها را در شرایط هایپوکسی (غلظت اکسیژن 5 درصد و اتمسفری (غلظت اکسیژن 20 درصد) با یکدیگر مقایسه می کند. رویان های دوسلولی پس از جمع آوری، به صورت تصادفی در دو گروه هایپوکسی و اتمسفری تقسیم و تا مرحله ی بلاستوسیست کشت داده شدند. تاثیر غلظت متفاوت اکسیژن بر کیفیت رویان ها با بررسی نرخ تشکیل بلاستوسیست، میزان خروج رویان از زونا، تعداد کل سلول ها، نسبت تعداد سلول های توده ی داخلی بلاستوسیست به تعداد کل سلول ها و نرخ لانه گزینی پس از انتقال رویان ارزیابی گردید. نتایج حاکی از افزایش معنی دار (05/0p<) در نرخ تشکیل بلاستوسیست (81/78 به 05/73)، خروج از زونا (07/56 به 50/49) و نسبت توده ی سلولی داخلی به کل سلول ها در رویان های گروه هایپوکسی در مقایسه با گروه کنترل (54/0 به 28/0) بود. همچنین نرخ لانه گزینی پس از انتقال رویان هایپوکسی (20/59) نسبت به گروه کنترل بهبود (05/0p<) یافت (50/29). برخلاف گزارشات پیشین اثرات مخرب اکسیژن موجب سرکوب رشد رویان در تمامی مراحل نمو می شود و براین نکته تاکید می کند که شرایط هایپوکسی از نمو رویان بهتر حمایت می کند. تفاصيل المقالة
      • حرية الوصول المقاله

        47 - Flexural monitoring of carbon fiber/epoxy composite by acoustic emission
        نیما بهشتی زاده امیر مصطفی پور
        Carbon / epoxy composite is one of the most useful polymer matrix composites that has special properties such as high strength-to-weight ratio, high hardness, high corrosion resistance, Resistance to nuclear radiation has high consumption in different industries such as أکثر
        Carbon / epoxy composite is one of the most useful polymer matrix composites that has special properties such as high strength-to-weight ratio, high hardness, high corrosion resistance, Resistance to nuclear radiation has high consumption in different industries such as aerospace industry. Therefor monitoring of loading of this type of composite is important. In order to determine failure mechanisms, acoustic emission method has more performance than other non-destructive methods. In this research acoustic emission method was used to evaluate and monitoring of the carbon epoxy composite three point bending load. For this purpose bending behavior of composite and relationship between acoustic signals studied. Using both fast Fourier transform and wavelet transform method in this research, which led to the same result. Using FFT maximum frequency 140 KHZ was determined, that wavelet transform confirmed this result too. Time limits that events was occurred on the under load specimen, was monitored by online diagrams that obtained from acoustic system. Finally failure mechanisms of composite were confirmed by SEM pictures. Time limits and ascending progress of diagrams validates bending diagram. تفاصيل المقالة
      • حرية الوصول المقاله

        48 - Investigation the Milling Strategies Effects on Machining of Convex Surfaces made of Glass/Epoxy Composite
        هادی محمدی هادی اسکندری ایمان دانایی
        In this study the effects of machining parameters such as shearing speed, feed rate, tool diameter and machining depth on different milling strategies i.e. 3D offset, spiral, raster and radial to produce the convex surface made of epoxy/glass composites is investigated. أکثر
        In this study the effects of machining parameters such as shearing speed, feed rate, tool diameter and machining depth on different milling strategies i.e. 3D offset, spiral, raster and radial to produce the convex surface made of epoxy/glass composites is investigated. The effects of mentioned strategies on output parameters such as surface roughness and milling removal rate is also studied. The results show that the output of radial strategy has the minimum roughness with the highest surface quality. The raster strategy gives the maximum roughness with the lowest surface quality. Also it can be seen that in 3D offset strategy, the removal rate is maximum and subsequently the time of machining is minimum. In addition the optimized values of machining parameters to achieve the best conditions for surface smoothness and removal rate is obtained. The results of this work can be used in research and development units of industries for operational purposes. تفاصيل المقالة
      • حرية الوصول المقاله

        49 - بررسی عیار پادتن ناشی از تزریق واکسنهای توأم آبله گوسفندی و بروسلوز
        احسان قریب ممبینی منوچهر قریب ممبینی مراد مرادی گراوند عبد الامیر رضایی محسن مشکوة مصطفی کنارکوهی داراب عبد الهی کریم امیری محمد آنتیک چی افشین قریب ممبینی ناهید سلطانی سده
        مقدمه و هدف: بروسلوزیس و آبله گوسفندی دو بیماری آندمیک در ایران بوده که سالیانه شیوع آنها باعث خسارات اقتصادی و بهداشتی فراوانی میگردد. چهارپایان اهلی حساس به این دو بیماری چندین سال است که در ایران و در فصول مناسب توسط واکسنهای تولیدی موسسه واکسن و سرم سازی رازی علیه أکثر
        مقدمه و هدف: بروسلوزیس و آبله گوسفندی دو بیماری آندمیک در ایران بوده که سالیانه شیوع آنها باعث خسارات اقتصادی و بهداشتی فراوانی میگردد. چهارپایان اهلی حساس به این دو بیماری چندین سال است که در ایران و در فصول مناسب توسط واکسنهای تولیدی موسسه واکسن و سرم سازی رازی علیه این دو بیماری واکسینه میشوند. ولی تا به امروز موفقیتی در ریشه کنی این بیماری ها، مخصوصا بیماری خطرناک بروسلوزیس که مشترک بین انسان و دام میباشد حاصل نشده است. در این مطالعه شاهد-موردی 1از 40بره با دامنه سنی 3/5تا 6ماه که در یک گله بومی در اطراف اهواز نگه داری میشدند استفاده گردید. واکسنها و محلولهای مورد استفاده در این تحقیق از موسسه واکسن و سرم سازی رازی تهیه شدند. نتایج: اطلاعات حاصل از این تحقیق نشان داد که مخلوط کردن واکسن باکتریال FDRev. 1با واکسن ویروسی آبله گوسفندی و تزریق آنها در یک نوبت همان تیتر محافظت کنندگی حاصل از تزریق واکسن FDRev. 1به تنهایی را ایجاد میکند. نتیجه-گیری: پس میتوان با اجرائی نمودن این تحقیق در کل کشور، در نیروی انسانی و هزینهها به دلیل تزریق این دو واکسن در یک نوبت به صورت مخلوط صرفه جوی کرد. همچنین از مضرات ناشی از تزریقات متعدد مانند استرس در دامها نیز میکاهد. تفاصيل المقالة
      • حرية الوصول المقاله

        50 - Synthesis of polymer matrix nanocomposite with carbon fibers and analysis of its strength properties
        S.M.M. Shafiei
        In polymer-based nanocomposites, carbon nanofibers have been used to improve mechanical properties in various applications. In this research, the tensile properties of carbon nanofibers have been used to create carbon-epoxy nanocomposite and improve the mechanical prope أکثر
        In polymer-based nanocomposites, carbon nanofibers have been used to improve mechanical properties in various applications. In this research, the tensile properties of carbon nanofibers have been used to create carbon-epoxy nanocomposite and improve the mechanical properties of epoxy nanocomposite, and the effect of the weight percentage of carbon nanofibers on the mechanical properties of epoxy nanocomposite has been investigated. Epoxy with weight percentages of 1.0, 5.0 and 1.5 carbon nanofibers were produced and their mechanical properties were investigated. The results showed that the use of even a small percentage of carbon nanofibers can lead to the improvement of mechanical properties. تفاصيل المقالة
      • حرية الوصول المقاله

        51 - Tit Synthesis of polymer matrix nanocomposite with carbon fibers and analysis of its strength properties
        seyed mohammad shafiei
        In polymer-based nanocomposites, carbon nanofibers have been used to improve mechanical properties in various applications. In this research, the tensile properties of carbon nanofibers have been used to create carbon-epoxy nanocomposite and improve the mechanical prope أکثر
        In polymer-based nanocomposites, carbon nanofibers have been used to improve mechanical properties in various applications. In this research, the tensile properties of carbon nanofibers have been used to create carbon-epoxy nanocomposite and improve the mechanical properties of epoxy nanocomposite, and the effect of the weight percentage of carbon nanofibers on the mechanical properties of epoxy nanocomposite has been investigated. Epoxy with weight percentages of 1.0, 0.5 and 1.5 carbon nanofibers was produced and their mechanical properties were investigated. The results showed that the use of even a small percentage of carbon nanofibers can lead to the improvement of mechanical properties. Considering the fact that the non-uniform distribution of these nano-fibers in the epoxy matrix on the one hand and also the lack of acceptable adhesion between these two phases are critical issues that lead to the formation of lumps in the matrix and finally the loss of mechanical properties in will find. تفاصيل المقالة