Tit Synthesis of polymer matrix nanocomposite with carbon fibers and analysis of its strength properties
الموضوعات : Analytical and Numerical Methods in Mechanical Design
1 - Department of Mechanical Engineering
الکلمات المفتاحية: Polymer matrix, Carbon-epoxy, nanocomposite , strength, properties,
ملخص المقالة :
In polymer-based nanocomposites, carbon nanofibers have been used to improve mechanical properties in various applications. In this research, the tensile properties of carbon nanofibers have been used to create carbon-epoxy nanocomposite and improve the mechanical properties of epoxy nanocomposite, and the effect of the weight percentage of carbon nanofibers on the mechanical properties of epoxy nanocomposite has been investigated. Epoxy with weight percentages of 1.0, 0.5 and 1.5 carbon nanofibers was produced and their mechanical properties were investigated. The results showed that the use of even a small percentage of carbon nanofibers can lead to the improvement of mechanical properties. Considering the fact that the non-uniform distribution of these nano-fibers in the epoxy matrix on the one hand and also the lack of acceptable adhesion between these two phases are critical issues that lead to the formation of lumps in the matrix and finally the loss of mechanical properties in will find.
[1] Iwahori Y, Ishiwata S, Sumizawa T, Ishikawa T. Mechanical properties improvements in two-phase and three-phase composites using carbon nano-fiber dispersed resin. Compos Part A Appl Sci Manuf 2005;36:1430–9.
[2] Jin F-L, Li X, Park S-J. Synthesis and application of epoxy resins: A review. J Ind Eng Chem 2015;29:1–11.
[3] Santos P, Silva AP, Reis PNB. Effect of Carbon Nanofibers on the Viscoelastic Response of Epoxy Resins. Polymers (Basel) 2023;15:821.
[4] dos Santos PSP, Maceiras A, Valvez S, Reis PNB. Mechanical characterization of different epoxy resins enhanced with carbon nanofibers. Frat Ed Integrità Strutt 2021;15:198–212.
[5] Tsai YI, Bosze EJ, Barjasteh E, Nutt SR. Influence of hygrothermal environment on thermal and mechanical properties of carbon fiber/fiberglass hybrid composites. Compos Sci Technol 2009;69:432–7.
[6] Singh SK, Singh S, Kohli R, Jain A, Kumar A. Effect of TiO2 dispersion on mechanical properties of epoxy polymer. AIP Conf. Proc., vol. 1728, AIP Publishing LLC; 2016, p. 20586.
[7] Liu S, Chevali VS, Xu Z, Hui D, Wang H. A review of extending performance of epoxy resins using carbon nanomaterials. Compos Part B Eng 2018;136:197–214.
[8] Zhang B-T, Zheng X, Li H-F, Lin J-M. Application of carbon-based nanomaterials in sample preparation: A review. Anal Chim Acta 2013; 784:1–17.
[9] Chung Y-C, Choi JW, Park JS, Shin CH, Chun BC. Covalent bonding of surface-modified montmorillonite nanoparticle with polyurethane and its impact on shape memory effect and mechanical properties. J Thermoplast Compos Mater 2011; 24:477–97.
[10] Adak B, Joshi M, Butola BS. Polyurethane/functionalized-graphene nanocomposite films with enhanced weather resistance and gas barrier properties. Compos Part B Eng 2019; 176:107303.
[11] Chen Q, Wu W, Zhao Y, Xi M, Xu T, Fong H. Composites : Part B Nano-epoxy resins containing electrospun carbon nanofibers and the resulting hybrid multi-scale composites. Compos PART B 2014; 58:43–53. https://doi.org/10.1016/j.compositesb.2013.10.048.
[12] Andrews R, Jacques D, Qian D, Rantell T. Multiwall carbon nanotubes: synthesis and application. Acc Chem Res 2002; 35:1008–17.
[13] Ajayan PM, Schadler LS, Giannaris C, Rubio A. Single‐walled carbon nanotube–polymer composites: strength and weakness. Adv Mater 2000;12:750–3.
[14] Liu L, Wagner HD. Rubbery and glassy epoxy resins reinforced with carbon nanotubes. Compos Sci Technol 2005;65:1861–8. https://doi.org/10.1016/j.compscitech.2005.04.002.
[15] Zhang W, Deng X, Sui G, Yang X. Improving interfacial and mechanical properties of carbon nanotube-sized carbon fi ber / epoxy composites. Carbon N Y 2019; 145:629–39. https://doi.org/10.1016/j.carbon.2019.01.063.
[16] Moniruzzaman M, Du F, Romero N, Winey KI. Increased flexural modulus and strength in SWNT/epoxy composites by a new fabrication method. Polymer (Guildf) 2006;47:293–8.
[17] Prolongo SG, Burón M, Gude MR, Chaos-Morán R, Campo M, Ureña A. Effects of dispersion techniques of carbon nanofibers on the thermo-physical properties of epoxy nanocomposites. Compos Sci Technol 2008; 68:2722–30. https://doi.org/10.1016/j.compscitech.2008.05.015.
[18] Camanho PP, Dávila CG. Mixed-mode decohesion finite elements for the simulation of delamination in composite materials. 2002.
[19] Rao GVG, Mahajan P, Bhatnagar N. Machining of UD-GFRP composites chip formation mechanism. Compos Sci Technol 2007;67:2271–81.
