List of Articles HA

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Fatigue Analysis and Optimization of Crankshaft of V8 Diesel Engine
  علی عبداللهی فر محمدامید خشوعی سید مسعود هاشمی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Deflection and Free Vibration of Sandwich Panel with Honeycomb Core on Winkler Elastic Foundation
  یونس یوسفی حسین وحدانی فر رضا شیرانی محمد دهقانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Experimental investigation of the effect of suspended nanoparticles into conventional fluid on the heat transfer improvement
  ارش کریم پور داود طغرایی امید علی اکبری مجید زرین قلم غلامرضا احمدی شیخ شبانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Providing a thermodynamic model to simulate the spark ignition engine fueled with natural gas and ethanol mixture
  حسن زمانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Energy Harvesting Electrical from Nano Beam with Layer Piezoelectric under Random Vibration
  حسین وحدانی فر رضا شیرانی محمد دهقانی یونس یوسفی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Ti-6Al-4V Synthesized by Mechanical Alloy Method and Mechanical and Bioactivity Properties of Ti-6Al-4V/HA-Clay Nano composite
  محمدعلی مطلبی ابراهیم کرمیان مجید کریمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Numerical investigation of heat transfer and laminar Water-Al2O3 ‎nanofluid flow in a rectangular Rib-Microchannel
  داود طغرایی آرش کریمی پور امید علی اکبری مجید زرین قلم حبیب اله عالی‌پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Friction Stir Welding؛ Material Flow؛ Heat Generation؛ Thermal Simulation؛ Poly methyl methacrylate (PMMA)
  حامد آقاجانی درازکلا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Experimental Investigation of Nano-structured Aluminum Production Using Accumulative channel-die compression bonding (ACCB)
  محسن مطهری نژاد سعید شهرکی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Failure Mechanisms Investigation in Thermal Barrier Coatings under Isothermal and Non-sothermal Fatigue Loadings using Design of Experiments
  محمد آزادی غلامحسین فرهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - AZ31/HA-Zeolite Nano Crystalline Biocomposite Fabricated by Mechanical Alloying and Powder Metallurgy: Mechanical Properties
  حسن قیصری ابراهیم کرمیان محمد براتی سده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Numerical study on the effect of hammering pressure on thickness reduction in hot tube metal gas forming process
  علی طالبی انارکی محسن لوح موسوی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Dynamic modeling and nonlinear vibration simulation of piezoelectric micro-beam in self sensing mode of atomic force microscope
  احمد حقانی رضا قادری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Modal Analysis Turboshaft Test Stand Motor Designed by Using ANSYS
  مجتبی حسنلو سید غلامرضا میرحسینی محمود صادق زاده احمد باقری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - New laboratory scale Grinding method to predict energy and the feed grindability of mill of Sarcheshmeh Copper Complex
  محمد رزانی ابوالفضل معصومی مسعود رضایی زاده محمد نوع پرست
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Experimental investigation of the effects of temperature and nanoparticles volume fraction on the viscosity of Newtonian hybrid nanofluid
  Ashkan Afshari Mohammad Eftekhari Yazdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Optimizing the Torque of Knee Movements of a Rehabilitation Robot
  محمدحسین زین الدینی مصطفی پیرمرادیان Farhad Azimifar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - A new method for determination of natural frequency in bending vibration mode of single-walled carbon nanotubes
  علیرضا فتاحی واجاری
  20.1001.1.27834441.2021.13.1.1.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Thermo-mechanical fatigue simulation of exhaust manifolds
  Hojat Ashori
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Evaluation of Thermal Barrier Coating in Low Cycle Fatigue Life for Exhaust Manifold
  Hojjat Ashouri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Assessing the vulnerability of Shiekh Bahaei’s bath under the blast wave
  Melika Honary Abdollah Vaez Shoushtari Erfan Jaberzadeh
  20.1001.1.27834441.2021.13.2.4.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - The effect of physical and mechanical properties on the abrasion resistance of artificial stones produced with granite waste
  Seyyed Mohammad Javad Mousavi Reza Abedinzadeh Mohammad Reisi
  10.71939/jsme.2023.1091984
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Investigation of modern ceramics in bioelectrical engineering with proper thermal and mechanical properties
  Sharif Heydari Ali Attaeyan Pegah Bitaraf Amir Mohammad Gholami Bahareh Kamyab Moghadas
  20.1001.1.27834441.2021.13.3.5.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - CFD simulation of hydrothermal of a nanofluid in a microchannel subjected to a magnetic field
  Mohammad Reza Assari Arman Mohammadian Alireza Jafar Gholibeik
  20.1001.1.27834441.2021.13.3.2.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Effect of residual stress in low cycle fatigue for coated exhaust manifold
  Hojjat ashouri
  20.1001.1.27834441.2022.14.2.1.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Investigating the performance of hydroponic green fodder and simplified heat transfer model of nanofarm for agricultural engineering application
  Amirreza Esmaeili Hamidreza Bahrami Rozita Hajian Mohsen Karimian Ehsan Shokrani
  20.1001.1.27834441.2022.14.3.3.7
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Dynamic optimization of load step transient response of a turbocharged spark ignition engine focusing on valves timing
  Mehdi Keshavarz Ahmad Keshavarzi
  20.1001.1.27834441.2021.13.4.5.4
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Comparison between continuous sensitivity analysis and Taguchi method in optimization of electromechanical devices
  Mohammadali Tavakkoli
  20.1001.1.27834441.2022.14.1.3.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Investigation and optimization of the effect of input parameters on output parameters of electrical discharge machining of A356 nano-composite reinforced by SiC
  Amir Rahmani Ali Mokhtarian Mojtaba Rahimi
  20.1001.1.27834441.2021.13.4.1.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Molecular simulation for prediction of mechanical properties of polylactic acid polymer for biotechnology applications
  Amin Mansouri Ali Heidari Fatemeh Karimian Amir Mohammad Gholami Mehran Latifi Sheyda Shahriari
  20.1001.1.27834441.2021.13.4.3.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Investigation of cell biomechanics and the effect of biomechanical stimuli on cancer and their characteristics
  Atefeh Ghorbani Sheyda Shahriari Amir Mohammad Gholami
  20.1001.1.27834441.2021.13.4.6.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - The effect of the anodization voltage changes on the electric resistance of porous anodic alumina barrier layer and its thickness used in strain sensing devices
  Abolfazl Salehi Amnieh Khuzani
  20.1001.1.27834441.2022.14.2.3.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - A review on evaluation of natural polymers with the approach of drug delivery system using herbal plant microcapsules
  Amirreza Esmaeili Romina Hemami Yashar Ghaffari Somayeh Abdollahi
  20.1001.1.27834441.2022.14.2.6.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - The mechanical performance of silk and collagen nanoparticles for dental applications
  Mohammad Hossein Malekipour Esfahani Behnoush Selahbarzin
  20.1001.1.27834441.2023.15.1.5.2
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Low cycle fatigue prediction for cylinder head considering notch stress-strain correction proposed by Neuber
  Hojjat Ashouri
  20.1001.1.27834441.2022.14.3.1.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - The effect of explosive welding variables on corrosion behavior of 304 stainless steel–copper joint in 3.5% NaCl solution concentration environment
  MohammadReza Khanzadeh Reza Peykari Hamid Bakhtiari
  20.1001.1.27834441.2022.14.4.3.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Estimation and mapping of the global component of solar radiation and wind power density over Chad
  Marcel Hamda Soulouknga Iman Pishkar Dieudonné Kaoga Kidmo Mehdi Jahangiri
  20.1001.1.27834441.2023.15.1.4.1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Feedback linearization controller design for a geared transmission system considering asymmetric backlash and friction
  Shima Mirshahzadeh Hamed Khodadadi
  20.1001.1.27834441.2023.15.1.2.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Design of forks and lifting system of a 10-ton forklift truck by FEM simulation
  Mohammad Sajjad Mahdieh Farshad Nazari Fadhil Abbas  Ghlaim
  10.71939/jsme.2024.1092071
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Optimization of drilling penetration rate through the optimal design of drilling leg and mechanical and hydraulic parameters of drilling using energy characteristic method (case study: South Pars gas field)
  MohammadReza Nouri Mojtaba Rahimi Ali Mokhtarian
  10.71939/jsme.2024.1092079
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Designing a robot to follow a command from the analysis of the image received from the operator
  Majid Amiri Shayan Farokhi Aleh Kouhi Ahmad Keshavarzi
  10.71939/jsme.2023.1092083
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Conceptual design of the inlet flow preheat system to the nozzle test equipment of a turbine engine
  Behrooz Shahriari Hamid Farrokhfal Mohammad Reza Nazari
  10.71939/jsme.2024.1092091
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Analysis of chaotic vibration in a hexagonal centrifugal governor system
  مصطفی غیور سعید ضیایی راد حبیب رمضان نژاد آزاربنی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Numerical and Experimental Study of Effect of Scan Velocity in Laser Forming by Temperature Gradient Mechanism
  حسن مسلمی نائینی ولی اله پناهی زاده محمد حسین پور گللو سیامک مزدک
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Solution of Nonlinear Hardening and Softening type Oscillators by Adomian’s Decomposition Method
  بهرام گل محمدی قاسم اسعدی کردشولی علیرضا وحیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Tolerance Analysis of the Trigger Mechanism Assembly Using Direct Linearization Method
  مرتضی غلامی محمد رضا موحدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Analysis of Roll Wear in Reshaping Using Finite Element Simulation
  مهدی سلمانی تهرانی رضا خدابنده شهرکی حسام ولیدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Nonlinear Vibration Analysis of Multi-Walled Carbon Nanotubes in Thermal Environment using the Nonlocal Timoshenko Beam Model
  ابوالحسن نظری نژاد گیاشی رضا انصاری حبیب رمضان نژاد آزاربنی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Investigation of Shape Functions Role on the Mesh-free Method Application in Soft Tissue Elastography
  Hamed Ajabi Naeeni Mohammad Haghpanahi Hamid Behnam Hadi Pirali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Tolerance Analysis of the Trigger Mechanism Assembly Using Direct Linearization Method
  عبدالعلی مراثی محمد سالم
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Thermal Effect on the Torsional Buckling of Double Walled Carbon Nanotube Embedded in Pasternak Foundation
  علی قربانپور آرانی محمد شریف زارعی مهدی محمدی‌مهر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Nonlinear Vibration Analysis of Embedded Multiwalled Carbon Nanotubes in Thermal Environment
  رضا انصاری حبیب رمضان نژاد آزاربنی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Free Vibration Analysis of FGM Cylindrical Shell with Supported Ring Based on Reddy Model under Clamped Boundary Condition
  محمد رضا عیسوند زیبائی مهدی سلمان زاده رسول موسوی‌فر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Inverse Identification of Circular Cavity in a 2D Object via Boundary Temperature Measurements Using Artificial Neural Network
  محمد امین احمدفرد محمد جواد کاظم زاده پارسی علیرضا تهور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Using the Ultrasonic Nondestructive Methods for Prediction of Mechanical Properties of AISI 4140 Alloy Steel
  محمد حمیدنیا فرهنگ هنرور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Nonlocal Mechanical Buckling Analysis of Nano Single Layer Sheets Using Differential Quadrature method
  M. Sadeghian M. Jabbarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Study of Aspect Ratio Effect on Mechanical Properties Polymer/NanoComposite
  محمد هاشمی گهروئی حسین گلستانیان مهدی سلمانی تهرانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Study Effect of Deformation Nanochannel Wall Roughness on The Water-Copper Nano-Fluids Poiseuille Flow Behavior
  محمد میثم امراللهی پورشیرازی داود طغرایی احمدرضا عظیمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - Investigation of Friction Coefficient Effects on Fishtail Defect in Hot Ring Rolling Process
  امیر حسین قیصری محمدرضا فروزان عبدالعلی مراثی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Study on the Effect of Process and Materials on Tensile Strength of the WGRT and Polypropylene Injection Molded Parts
  مهدی بزرگی طاهر ازدست عبدالمحمد رضاوند
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Review of Micro-Particles of Hydroxyapatite Nanoparticles by Ball Milling
  F. Fardi Pour M. Najafi Anaraki M. Karmian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Finite Element Analysis of Safety Mechanism in a Mechanical Controller
  مهدی مساح کورش حسن‌پور مهرداد پورسینا مهدی سلمانی تهرانی مسیح سنبلستان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Design and Production of a Pneumatic Moving Exciter for Determination of Vibration Behavior of Structures in Variable Frequencies
  فیروز بختیاری‌نژاد میثم میرزایی مهدی وهابی امیر ابوالفضل صورتگر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Dynamic Stability Analysis of a Beam Excited by a Sequence of Moving Mass Particles
  مصطفی پیرمرادیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Parameter Analysis and optimization of equal channel angular pressing extrusion for titanium alloy using Taguchi design of experiments method
  حسن خادمی زاده علی افتخاری حسام الدین ابطحی فروشانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Modeling and Crack-growth and Calculate First Intensity Factor with Ansys Software
  S.M. Hossein Mirgilani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Research in Sensibility of Locating Damage Methods Based on Mode Shape to Damage Intensity
  علی حسن زاده جعفر اسکندری جم سعید شکرالهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Nonlinear Thermo-Mechanical Behaviour Analysis of Activated Composites With Shape Memory Alloy Fibres
  سیامک مقبلی محمدجواد محمودی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Bending Sector Graphene Sheet Based on the Elastic Winkler-Pstrnak with the Help of Nonlocal Elasticity Theory Using Developed Kantorovich Method
  شهریار دستجردی مهرداد جبارزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - Application of T-shape Friction T test for Ti-6Al-4V Alloy at Elevated Temperatures
  فرزان براتی یاسر نعمتی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Nonlinear Vibration Analysis of Composite Plates with SMA Wires, Considering Instantaneous Variations of the Martensite Volume Fraction
  محمد شرعیات سارا سمایی مجتبی مرادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Improving of Microstructure and Mechanical Properties of Al-A356 Alloy with Compo-Casting Method
  اسماعیل دماوندی سلمان نوروزی سید محمود ربیعی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Static and Dynamic Analysis of Bus Structure and Chassis of O-457
  ابوالفضل محبوبی شاد محسن اصفهانیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Experimental study of fracture mechanics in the aluminum matrix composites containing Fifteen percent silicon carbide particles
  محمد رنجبران محمد تقی نجفی مهدی اعطائی رسول امینی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - The Effect of Electrical Discharge Machining Parameters on Alloy DIN 1.2080 Using the Taguchi Method and Optimal Determinant
  پویان صدر امین کلاه دوز علی افتخاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Simulation of Human Foot Mechanism with a Degree of Freedom Motion
  دامون بختیاریان هادی همایی امین ملکی زاده مراد شهبازی تک آبی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - Numerical Study on Effect of Bilinear Pressure Path on Corner Filling in Hydroforming of Tube in Box-Shape Die
  محسن لوح موسوی میثم شهبازی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Optimization of Material Removal Rate in Electrical Discharge Machining Alloy on DIN1.2080 with the Neural Network and Genetic Algorithm
  مسعود عظیمی امین کلاه دوز سید علی افتخاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Path Planning of a 3 DOF Servo-Hydraulic Mechanism Using Genetic Algorithm
  فرشید آقاداوودی شهرام لنجان نژادیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - Numerical Determination of the Forming Limit Diagram for 304 Stainless Steel Based on Phase Change in Deep Drawing Process
  مسعود نصر اصفهانی مهران مرادی فرهاد حاجی ابوطالبی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Analysis of Fatigue Cracks of Diesel Engines Cylinder Heads using a Two-Layer Viscoplasticity Model and Considering Viscousity Effects
  حجت عاشوری بابک بهشتی محمد رضا ابراهیم زاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - Passive Non-Prehensile Manipulation of a Specific Object on Predictable Helix Path Based on Mechanical Intelligence
  عبدالله باجلان عادل اکبری مجد
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Static and Dynamic Analyze of the an Aluminum Pad used as Portable Roadway
  مجتبی رضایی احمد محمودی ابوذر اسحقی اسکوئی رضا حسینی ثانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Modeling & Comparison of Mechanical Behavior of Foam Filled & Hollow Aluminum Tubes by LS-DYNA & Introducing a Neural Network Model
  میثم رستمی مجتبی حسنلو مصطفی سیاوشی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - Experimental Study of the Voltage and Number of the Coil Rounds in Electromagnetic Forming Process of the V shape Aluminum sheets
  سجاد نادیان برسیانی احمد کشاورزی امین کلاه دوز
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - The Parameters Investigation and Hardness Optimization of A380 Aluminum Alloy produced by Mechanical Vibrator
  سعید احترامیان حقیقی امین کلاه دوز مجید کریمیان
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - An overview of Friction stir processing of magnesium alloys reinforced by ceramic additive: Microstructure and mechanical properties
  Masoud Kasiri-Asgarani
  10.71939/jsme.2024.1120195
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - Nonlinear radial vibration of single-walled carbon nanotubes with using numerical methods
  Zahra Azimzadeh Alireza Fatahi-Vajari
  10.71939/jsme.2024.1190493
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Free axial vibration of cracked nanotubes incorporating scale effects using doublet mechanics
  Alireza Fatahi-Vajari Zahra Azimzadeh
  10.71939/jsme.2024.1193861