List of Articles Roughness

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - The experimental approach into the influence of external inductance on the discharge characteristic of HiPIMS
  Saeed Ghasemi Pourya Seyfi Alireza Farhadizadeh Hamid Ghomi
  10.1007/s40094-019-00347-3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Laboratory Study of The Effect of V-shaped Structure on Changes in Fishway Roughness
  maryam shahabi Javad Ahdiyan Marjan Narimousa Mehdi Ghomeshi Hossein Azizi Nadian
  10.30495/wsrcj.2022.64329.11268
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Optimization The High Speed Machining of Hardened AISI 4140 Steel Using Vapor Deposited Cutting Tools (Wear and Roughness)
  Mehdi Jalali Azizpour Ata Fardaghaie
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Estimation of Surface Roughness in Turning by Considering the Cutting Tool Vibration, Cutting Force and Tool Wear
  A. Salimi A. Ebrahimpour M. Shalvandi E. Seidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304
  Hamzeh Shahrajabian Masoud Farahnakian Payam Saraeian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Experimental Study on Surface Roughness and Flatness in Lapping of AISI 52100 Steel
  Masoud Farahnakian H. ُُShahrajabian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Development of Process Model for Optimal Selection of Process Parameters for Geometric Tolerances and Surface Roughness in Stereolithography
  Chockalingam Kunjan Jawahar N. Chandrasekhar U. Praveen J. Karthic M.
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Influence of Vibratory Finishing Process by Incorporating Abrasive Ceramics and Glassy Materials on Surface Roughness of CK45 Steel
  Payam Saraeian Mostafa Gholami Amir Behagh Omid Behagh Hamid Reza Javadinejad Mohammad Mahdieh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Investigating the Effect of Rotation Speed and Ultrasonic Vibrations in the Incremental Forming Process
  Saeed Amini Farshad Nazari Mohammad Baraheni Amir Hossein Ghasemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Effects of Abrasive Media on Surface Roughness in Barrel Finishing Process
  Ali Vakili Sohrforozani Masoud Farahnakian Mohammad Sajjad Mahdieh Amir Masoud Behagh Omid Behagh
  10.30495/admt.2020.1889912.1165
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Thermal Loads and Surface Quality Evaluation in Machining of Hardened Die Steel under Dry and Cryogenic Machining
  Farshid Jafarian Emad Mohseni
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Evaluation of Fatigue Behavior and Surface Characteristics of Novel Machining Process: Rotary Chemical Machining (RCM)
  Pooya Bahrami Ali Khoshanjam Abdolhamid Azizi
  10.30495/admt.2021.1921815.1247
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Multi-Objective Optimization of Shot-Peening Parameters Using Modified Taguchi Technique
  M Hassanzadeh S. E Moussavi Torshizi
  10.22034/jsm.2020.1908867.1641
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - پیش بینی تأثیر پوشش گیاهی بر ضریب زبری هیدرولیکی کرانه و بستر رودخانه خشک شیراز
  محمدرضا نیک منش
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - شبیه سازی پرش هیدرولیکی در بستر با زبری سنگ‎ریزه ای با نرم‎افزار FLOW-3D
  ناهید پورعبدالله تورج هنر شهاب انصاری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Calculation of vehicle’s mass transfer due to road roughness in accelerating and braking maneuvers
  Kazem Reza Kashyzadeh Ali Esfandi Seyed Majid Ataei Ardestani Hassan Ghafori Varzaneh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Study of the vibration behavior of vehicle body due to road roughness during accelerating motion
  Kazem Reza Kashyzadeh seyed mohammad saleh mousavi bafrouyi saleh arab
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - The Effect of Nozzle Diameter and Water Pressure On Cutting CK45 Steel Quality in Water Jet Process
  Unes Anamoradi Mehrdad Ozv Aminian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Parameters change effect of cutting tool diameter, depth of cut and feed rate in the process of turbine blade 4 axis milling on the roughness and surface texture
  Amir Alinaghizadeh Behrouz Norouzi Ali Farahmandi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Fatigue Prediction on Wheel’s Hub Under Random Vibration Based on Road Roughness
  Kazem Reza kashi Zadeh Mohamad Jafar Ostad Ahmad Ghorabi Alireza Arghavan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Sensitivity analysis of Manning roughness coefficient of rivers in HEC-RAS model to determine flood zones (case study: Ker River- Fars province)
  vahid sohrabi Farshid Hashmipour Petkoi Hamid Sheikhpur Shahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Optimizing Surface Roughness of Nylon6/CaCO3 Nano-Composites Using Harmony Search Algorithm
  Shahab Mohammadi Reza Farshbaf Zinati MohammadReza Razfar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Statistical Analysis and Optimization of Factors Affecting the Surface Roughness in UVaSPIF Process Using Response Surface Methodology
  Mehdi Vahdati Ramezanali Mahdavinejad Saeid Amini Mahmoud Moradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Synoptic analyzing the occurrence of strong wind and dust storm in Shiraz in March 2019
  Ashraf Asadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Measurement of Generated Stemflow for the Quercus Castaneifolia C.A.M and Acer Velutinum Boiss trees in the Growth Area of Hyrcanian Forests
  Saywan Nikkhah Seyed Mohsen Hosayni Abdolvahed Khaledi Darvishan omid Fathizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Investigation of Parameters Affecting Surface Integrity and Material Removal during Electrical Discharge Machining of HARDOX-400 Steel
  Hesam Motevasseli Ahmad Afsari Ali Khosravifard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Predicting the Influence of Electrical Discharge Machining (EDM) Parameters on the Finished Work Surface in CK45 Steel
  Esmaeil Jafari Ahmad Afsari Sina Abedpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Experimental Investigation of the Effects of the Roller Burnishing Parameters on the Surface Roughness and Micro-hardness of Ti6Al4V Alloy
  Mohammad Asadbeiki Reza Nosouhi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Experimental Study of Germanium Dry Machining with Various Rake Angles and Different Feed Rates of Tool
  Mohammad Reza Safavipour Masoud Farahnakian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Comparing and Investigating the Effect of Input Parameters on External Parameters in Parts of Different Materials in EDM Operation Using Taguchi Method
  Seyed Mohammad Reza Nazemosadat Ahmad Afsari Najwan Nejah Adnan Jeddeh Alireza Bahramkia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Analysis of Surface Roughness and Micro-hardness in Roller Burnishing of Aluminum Alloy 6061
  Amin Poursafar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Experimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel
  Mojtaba Taghizadeh Sayed Ali Mosavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Investigation of the Effective Parameters on Surface Roughness in Magnetic Abrasive Finishing Process Using Design of Experiments
  Yahya Choopani Mohammad Reza Razfar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Micro Machining of AISI 440C Stainless Steel using Magnetic Field and Magnetic Abrasive Particles
  Yahya Choopani Mohammad Reza Razfar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Investigation of Magnetic Abrasive Finishing on Inner Surface of AL 6061 Tube
  Hamzeh Shahrajabian Masoud Farahnakian Seyed Alireza Mousavi Hasan Soltani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Machinability Investigation of Inconel 657 in High-speed Turning
  Amir Hossein Khoei Hasan Fathi Masoud Farahnakian Mohammad Reza Razfar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Experimental Investigation of the Surface Roughness in Grinding of BK7 Optical Glass in Brittle Mode
  Vahid Barahimi Masoud Farahnakian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500
  Mohammad Lotfi Saeid Amini Sayed Ali Sajjady Adil Hussein Juaifer
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Machining of Makrana White Marble Surfaces by Abrasive Water Jet Machining
  Vishal Gupta M.P. Garg Garg N.K. Batra Arjun S. Wadwa
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Experimental Study of the Effect of Roughness and Broad Crested Weir Height on Discharge Coefficient
  Ebrahim Nohani amin mohebizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - Laboratory Study of SimultaneousCoarse-gradient Roughness and Positive Slope on Hydraulic Jump Length in Classical Stilling Basin
  Roozbeh AGHA MAJIDI Amir hossein Nozari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Application of orthogonal array technique and particle swarm optimization approach in surface roughness modification when face milling AISI1045 steel parts
  Masoud Azadi Moghaddam Farhad Kolahan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - On the use of back propagation and radial basis function neural networks in surface roughness prediction
  Angelos P. Markopoulos Sotirios Georgiopoulos Dimitrios E. Manolakos
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Assessment of manning’s resistance coefficient in compound channels
  H Hajikandi M Hatami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - اثر زبری سطح بر ضریب اصطکاک خشک فولاد - فولاد
  ح. چارستاد س.م خورسندی جو
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Investigating the morphology and nanostructure of Ni-Fe alloy coatings prepared by electrodeposition
  سارا فضلی محمد ابراهیم بحرالعلوم
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Study of the effect of magnetic field on the surface roughness of the workpiece in electric discharge machining of Al2O3-reinforced A413 composite
  Ahmadreza Mizbani Sayed Ehsan Mirmohammadsadeghi Ali Mokhtarian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Micromachining the Aluminium Tubes Using Abrasive Finishing in Alternating Magnetic Field
  Reza Abedinzadeh Rasoul Gorji
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Improving surface roughness in barrel finishing process using supervised machine learning
  Mohammad Sajjad Mahdieh Mehdi Bakhshi Zadeh Amirhossein Zare Reisabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Investigating on surface roughness of nanohybrid and micro-hybrid composite resins following the use of a simplified polishing system
  Seyedeh Parvin Hosseini Fadabobeh Mehrdad Kazemian M. R Malekipour Esfahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - بررسی اثرات ماشینکاری EDM برریزساختار سطح درفولاد CK45
  سینا عابدپور اسماعیل جعفری احمد افسری سعید حدیدی مود
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - The Comparative Study of ADI Machinability with 42CrMo4 Steel in Turning Process
  M. SH H. عباسی ایروانلو H. عیوضی باقری A. جعفری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Electroless Deposition of Ni-P/nanoPTFE Composite Coating and Investigation of Its Properties
  M. Tajbakhsh محمود فرهادی نیا farhadinia A. poustdouz O. yaghobi zadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Effects of Roughness on Riprap Stability around Cylindrical Bridge Pier in 180 Degree River Bend
  Alireza Masjedi Amir Taeedi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Analytical Study of the Bed Roughness and Entrainment Ratio of Saline Density Currents on Hydraulic Jump
  Nader Barahmand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Evaluation of internal surface roughness in fiberglass pipes by surface roughness instruments
  Farnoush Aghaee Daneshvar Nasser Talebbeydokhti Seyed Mehdi Dehghan Seyed Mohammad Mehdi Elhamian
  10.30495/wej.2024.31547.2377
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Laboratory evaluation of artificial roughness and adverse slope effect in control of hydraulic jump
  Mehdi Zeinivand Seied Mohsen Sajadi Mosaieb Haghighi Nejad Seyed Amin Asghari Pari Mahmood Shafai Bejestan
  10.30495/wej.2021.23966.2226
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Investigating the generalizability of the results obtained from laboratory models to natural rivers for estimating the head-discharge curve
  Parisa Alinouri Mohamad Bijankhan
  10.30495/wej.2023.5830
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - An Experimental Study of the Effect of a Small-Scale Rectangular Canal’s Wall Roughness on the Flow Patterns in a 90° Sharp Bend with a Radius of Curvature to the Bottom Width Ratio of 2
  Y. GH M. SH A. سوزه پور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Using the Incomplete Self-Similarity Method for Estimation of the Conjugate Depth Ratio of Density Jumps on Smooth and Rough Beds
  N. Barahmand