Optimization The High Speed Machining of Hardened AISI 4140 Steel Using Vapor Deposited Cutting Tools (Wear and Roughness)
Subject Areas : Mechanical EngineeringMehdi Jalali Azizpour 1 , Ata Fardaghaie 2
1 - Department of Mechanic, Ahvaz branch, Islamic Azad University, Ahvaz, Iran
2 - Department of Mechanics, Ahvaz branch
Islamic Azad University, Ahvaz, Iran
Keywords:
Abstract :
[1] Kivak, T., “Optimization of Surface Roughness and Flank Wear Using the Taguchi Method in Milling of Hadfield Steel with PVD and CVD Coated insertsˮ, Measurement, Vol. 50, 2014, pp. 19 – 28
[2] Bouzakis, K., Michailidis, N., Skordaris, G., Bouzakis, E., Biermann, D., and M’Saoubi, R., “Cutting with Coated Tools: Coating Technologies, Characterization Methods and Performance Optimizationˮ, CIRP Annals - Manufacturing Technology, Vol. 61, 2012, pp. 703 – 723
[3] Narasimha, M., Reiji Kumar, R., and Kassie, A., “Performance of Coated Carbide Toolsˮ, The International Journal of Engineering and Science (IJES), Vol. 6, 2013, pp. 47 – 54.
[4] Sgderberg, S., hogmark, S., “Wear Mechanisms and Tool Life of High Speed Steels Related to Microstructureˮ, Wear, Vol. 110, 1986, pp. 315 – 329.
[5] Philip Selvaraj, D., Chandramohan, P., and Mohanraj, M., “Optimization of Surface Roughness, Cutting Force and Tool Wear of Nitrogen Alloyed Duplex Stainless Steel in a Dry Turning Process Using Taguchi Methodˮ, Measurement, Vol. 49, 2014, pp. 205 – 215.
[6] Günay, M., Yücel, M., “Application of Taguchi Method for Determining Optimum Surface Roughness in Turning of High-Alloy White Cast Ironˮ, Measurement, Vol. 46, 2013, pp. 913 – 919.
[7] Shahrom, M. Yahya, N., and Yusoff, M., “Taguchi Method Approach on Effect of Lubrication Condition on Surface Roughness in Milling Operationˮ, Malaysian Technical Universities Conference on Engineering & Technology, Procedia Engineering, Vol. 53, 2013, pp. 594 – 599.
[8] Chinchanikar, S., Choudhury, S. K., “Investigations on Machinability Aspects of Hardened AISI 4340 Steel at Different Levels of Hardness Using Coated Carbide Toolsˮ, Int. Journal of Refractory Metals and Hard Materials, Vol. 38, 2013, pp. 124 – 133.
[9] Schulz, H., Dorr, J., Rass, I. J., Schulze, M., Leyendecker, T., and Erkens, G., “Performance of Oxide PVD-Coatings in Dry Cutting Operationsˮ, Surface and Coatings Technology, Vol. 146 –147, 2001, pp. 480 – 485.
[10] Ranjan Das, S., Dhupal, D., and Kumar, A., “Experimental Investigation into Machinability of Hardened AISI 4140 Steel Using TiN Coated Ceramic Toolˮ, Measurement, Vol. 62, 2015, pp. 108 – 126.
[11] Bazargan, A., Applied Linear Regression, Third ed. 2012, Shiraz University.
[12] Mitchell, M., “AnIntroduction to Genetic Algorithmsˮ, A Bradford Book The MIT Press Cambridge, London, England 5th printing, 1999.
[13] Ranjit, R., “A Primer On the Taguchi Methodˮ, Second ed. 1990, Society of Manufacturing Engineers.
[14] Jalali Azizpour, M., Mohammadi majd, H., “Wear Mechanisms in High Speed Steel Gear Cutting Toolsˮ, International Journal of Chemical, Materials and Metallurgical Engineering, Vol. 4, No. 9, 2010.
