A

  • AAli.M. Evaluation of Microstructure and Tensile Behavior of Fine-Grained AZ61 Alloy Tube Processed by Severe Plastic Deformation [ Vol.7, Issue 3 - Summer Year 2019]
  • Abasi.Mohammad Reza Microstructure and Mechanical Properties of the Friction Welded Joint between X53CrMnNiN219 and X45CrSi93 Stainless Steel [ Vol.5, Issue 1 - Winter Year 2017]
  • Abbasi Baharanchi.Mohsen Effects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts [ Vol.4, Issue 1 - Winter Year 2016]
  • Abbasi.Sedigheh The thermal conductivity investigation of nanofluids containing decorated Ag nanorods with Cu nanoparticles using statistical method [ Vol.5, Issue 2 - Spring Year 2017]
  • Abbasi.seyed mahdi Influence of Withdrawal Rate on As-Cast Microstructure and Stress-Rupture Life of Directionally Solidified Rene80 Superalloy [ Vol.10, Issue 2 - Spring Year 2022]
  • Abbasi.seysd Mahdi The Effect of Magnesium on the Microstructure and Stress Rupture Properties of Hastelloy X Supealloy [ Vol.7, Issue 3 - Summer Year 2019]
  • Abbasi.seysd Mahdi Investigating the Effects of Boron and Zirconium on the High-Temperature Fatigue Behavior of Nimonic 105 Super Alloy [ Vol.10, Issue 3 - Summer Year 2022]
  • Abbastabar Ahangar.Hossein Synthesis and Characterization of Linear/Nonlinear Optical Properties of GO, RGO, RGO-ZNO, and RGO-ZNO-Fe2O4 [ Vol.10, Issue 4 - Autumn Year 2022]
  • Abdellahi.Majid Modelling Dependency of the Steady-State Grain Size on the Stacking Fault Energy in Severely Plastic Deformed Materials [ Vol.9, Issue 3 - Summer Year 2021]
  • Abdellahi.Majid Estimation of the mean grain size of mechanically induced Hydroxyapatite based bioceramics via artificial neural network [ Vol.5, Issue 2 - Spring Year 2017]
  • Abdi.Farhad Mechanical Alloying and Spark Plasma Sintering of Equiatomic AlCoCrFeMnNi High Entropy Alloy [ Vol.10, Issue 1 - Winter Year 2022]
  • Abdollahzade Gavgani.Meysam Optimization of the strain distribution in the roll forming process using the desirability function and finite element methods [ Vol.5, Issue 2 - Spring Year 2017]
  • Abedi.Hooman Utilization of Microalloying with Rare Earth Elements and Hot Extrusion for Remarkable Grain Refinement and Enhancement of Mechanical Properties of as-Cast Magnesium Alloy [ Vol.8, Issue 4 - Autumn Year 2020]
  • aberoomand azar.parviz Fabrication of Silver Oxide and Nickel Oxide Nanoparticles by Green Synthesis Method Using Malva Sylvestris Plant Extract [ Vol.11, Issue 1 - Winter Year 2023]
  • Abu Osman.Noor Azuan In vitro behavior of silk fibroin-coated calcium magnesium silicate scaffolds [ Vol.4, Issue 1 - Winter Year 2016]
  • Abu Osman.Noor Azuan Synthesis of nano-structured sphene and mechanical properties optimization of its scaffold via response surface methodology [ Vol.4, Issue 2 - Spring Year 2016]
  • Adhami.Touraj Effects of Active Material Particles Size Distribution on the Fabrication of TiNb2O7 Electrode Used in Lithium-Ion Batteries [ Vol.9, Issue 3 - Summer Year 2021]
  • Afkhami.Alireza Evaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method. [ Vol.4, Issue 2 - Spring Year 2016]
  • Afsari.Ahmad New Iteration based Algorithm for Shape Optimization of Internal and External Boundaries of the Initial Blank in the Deep Drawing Process [ Vol.8, Issue 3 - Summer Year 2020]
  • Afshar.Abdollah Nanoporous anodized aluminum thickness optimization through pulse current mode [ Vol.3, Issue 4 - Autumn Year 2015]
  • Afzali Gorouh.Afsaneh Influence of electroplating parameters on microstructure and amount of ceramic particle deposition in Ni-Co-CeO2 composite coating [ Vol.7, Issue 4 - Autumn Year 2019]
  • Afzali.Maede Characterization and optimization of using calendula offlcinalis extract in fabrication of polycaprolactone-gelatin electrospun nanofibers for wound dressing applications [ Vol.6, Issue 2 - Spring Year 2018]
  • Aghajani.Hossein Mechanical Alloying and Spark Plasma Sintering of Equiatomic AlCoCrFeMnNi High Entropy Alloy [ Vol.10, Issue 1 - Winter Year 2022]
  • Aghasi.Hamideh Application of Taguchi design for optimization of corrosion behavior of amorphous silica thin film deposited through sol-gel dipping technique [ Vol.5, Issue 3 - Summer Year 2017]
  • Aghili.S.E. Effect of Post-Weld Intercritical Annealing on the Microstructure and Tensile Properties of a Gas Tungsten Arc Welded DP700 Steel [ Vol.9, Issue 4 - Autumn Year 2021]
  • Ahmadi.Farshid Investigation of mechanical properties and fracture surfaces of 5086 Al-based alloy processed by equal channel angular pressing in different routes [ Vol.5, Issue 4 - Autumn Year 2017]
  • Ahmadi.Mahdi The tribological properties of Cu-Ni3Al-MoS2 composite coating deposited by magnetron sputtering [ Vol.4, Issue 4 - Autumn Year 2016]
  • Ahmadi.Mahdi Fabricating the Tribological Properties and Investigating of Ni3Al-MoS2 Composite Coating [ Vol.9, Issue 1 - Winter Year 2021]
  • Ahmadi.Mojtaba Immobilization of Glucose oxidase on Meso-porous Glass-ceramic with the Skeleton of CaTi4(PO¬4)6 [ Vol.1, Issue 4 - Autumn Year 2013]
  • Ahmadi.Nasrin Synthesis, characterization and application of graphene oxide, graphene oxide quantum dots and graphene quantum dots in photoelectrochemical sensors [ Vol.7, Issue 2 - Spring Year 2019]
  • Ahmadi.Nasrin Effect of co-doping on hydrophilic and photoelectric properties of co-doped titania nanoparticles as a composition of electrode modifier [ Vol.7, Issue 3 - Summer Year 2019]
  • Ahmadi.Shahab Nanoporous anodized aluminum thickness optimization through pulse current mode [ Vol.3, Issue 4 - Autumn Year 2015]
  • Ahmadi.Siroos Optimization of the strain distribution in the roll forming process using the desirability function and finite element methods [ Vol.5, Issue 2 - Spring Year 2017]
  • Ahmadian.Peyman The Effect of Annealing Temperature on the High Temperature Deformation Behavior of Ti-5Al-4.2V-0.8 Mo-2Fe α/β Titanium Alloy [ Vol.10, Issue 3 - Summer Year 2022]
  • Ahmadvand.Shabnam Development and Evaluation of Nanomagnetic Carrier for the Controlled Loading and Release of Celecoxib [ Vol.10, Issue 1 - Winter Year 2022]
  • Ajal-Louian.Mohammad Plasma Influence of Surface Texture of Silicone Rubber for Biomedical Application in Scala Tympani [ Vol.9, Issue 2 - Spring Year 2021]
  • Akbari.Habibollah Forming limit curves of AA3105 on multiple temperature conditions: numerical investigation and experimental verification [ Vol.7, Issue 1 - Winter Year 2019]
  • Akbari.Mohsen Nonlinear bucking analysis of Polystyrene, Polyvinyl chloride, and Polypropylene cylindrical nano-composite shells reinforced by carbon nanotubes based on micro-mechanics and finite element methods [ Vol.5, Issue 4 - Autumn Year 2017]
  • Akbari.Mostafa Robust Multi-Objective Optimization of Mechanical Properties of Friction Stir Welding Using Neural Network and Modified-NSGA-II [ Vol.9, Issue 2 - Spring Year 2021]
  • Akbari.Mostafa Effect of Tool Pin Shape on Defect-Free FSP and Particles Distribution in SiC/Al6061 Composites [ Vol.9, Issue 1 - Winter Year 2021]
  • akbarzadeh.mehdi Tribological behavior of sputter-deposited MoSX/Ni coatings [ Vol.6, Issue 2 - Spring Year 2018]
  • Akhtari-Goshayeshi.Amir Prediction of Corrosion Rate for Carbon Steel in Soil Environment by Artificial Neural Network and Genetic Algorithm [ Vol.7, Issue 4 - Autumn Year 2019]
  • Alafzadeh.Mina Characterization and optimization of using calendula offlcinalis extract in fabrication of polycaprolactone-gelatin electrospun nanofibers for wound dressing applications [ Vol.6, Issue 2 - Spring Year 2018]
  • Alafzadeh.Mina Numerical Simulation of Fluid Flow over a Ceramic Nanoparticle in Drug Delivery System [ Vol.4, Issue 2 - Spring Year 2016]
  • Alafzadeh.Mina Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]
  • Alavi Zaree.Seyed Reza Statistical Approach on Corrosion Behavior of Dissimilar Welds of A387-Gr91/AISI316 Steels with PCGTAW Process [ Vol.5, Issue 1 - Winter Year 2017]
  • Alavi Zaree.Seyed Reza Optimization of Advanced Square Wave AC-GTAW Parameters to Improve Localized Corrosion Resistance of AA6082-T651 Aluminum Welds [ Vol.8, Issue 2 - Spring Year 2020]
  • Alaylı Güngör.Azize Green Synthesis of Nanoceria (CeO2) and Evaluation of Enzyme like Characteristics [ Vol.6, Issue 3 - Summer Year 2018]
  • Alimirzaloo.Vali Optimization of the strain distribution in the roll forming process using the desirability function and finite element methods [ Vol.5, Issue 2 - Spring Year 2017]
  • Aliramezani.Reihane Effect of Ni-P electroless coating and heat treatment on tribological and corrosion properties of copper substrate [ Vol.6, Issue 4 - Autumn Year 2018]
  • Aliramezani.Reihane Fabrication of anodic aluminium oxide template and the generation of magnetic Co nanowires within it [ Vol.7, Issue 4 - Autumn Year 2019]
  • Alirezaei.Shahram Evaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method. [ Vol.4, Issue 2 - Spring Year 2016]
  • Alizadeh.Masood Kinetics analysis of electrophoretic deposition using small signal and large signal modeling, Case study: Nano-Mullite suspension [ Vol.4, Issue 4 - Autumn Year 2016]
  • Alizadeh.Parvin The Relationship between Structural and Optical Properties of GeO2-PbO Glasses [ Vol.5, Issue 2 - Spring Year 2017]
  • Alizadeh.Sara Reinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber [ Vol.4, Issue 3 - Summer Year 2016]
  • Al-Shakarchi.Emad The Simulation on the Phase Formation of Bi-Ba-Ca-Cu-O high Temperature Superconductor [ Vol.9, Issue 4 - Autumn Year 2021]
  • Al-Sherbini.Al-Sayed Processing of aluminum flake powder via high energy ball milling under different conditions reaching to aluminum nanoparticles [ Vol.7, Issue 2 - Spring Year 2019]
  • Ameri.Elham The Effect of Multi-Walled Carbon Nanotubes on CO2/N2 Separation Using Sulfonated Polyether Ether Ketone/Polyetherimide Nano Composite Membrane [ Vol.11, Issue 1 - Winter Year 2023]
  • Amini.Kamran Structural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique [ Vol.5, Issue 1 - Winter Year 2017]
  • amini.M.M. Hydrothermal Assisted Sol-Gel Process on Binary Mixtures of Aluminum and Titanium Alkoxides: A Novel Route for the Fabrication of Single Phase Tialite [ Vol.5, Issue 3 - Summer Year 2017]
  • Amini.Saeid Statistical Analysis and Optimization of Factors Affecting the Surface Roughness in UVaSPIF Process Using Response Surface Methodology [ Vol.3, Issue 1 - Winter Year 2015]
  • Aminzare.Masoud Effect of Heat Treatment on Structural and Magnetic Properties of Nanocrystalline SrFe12O19 Hexaferrite synthesized by Co-Precipitation Method [ Vol.1, Issue 4 - Autumn Year 2013]
  • Amiri.Mina Fabrication of Aluminum Rectangular Twist Waveguides: Experimental Investigation and FEM Simulation [ Vol.8, Issue 1 - Winter Year 2020]
  • Amirjani.Amirmostafa Synthesis of nano-structured sphene and mechanical properties optimization of its scaffold via response surface methodology [ Vol.4, Issue 2 - Spring Year 2016]
  • Ammar.Mohammad Effect of silver interlayer on transient liquid phase (TLP) bonding of Al2024 to Ti-6Al-4V joints [ Vol.8, Issue 1 - Winter Year 2020]
  • amoshahi.Hamzeh A Biosensor for the Detection of Type b3a2 Related to Chronic Myelogenous Leukemia by Using Locked Nucleic Acid, Molecular Switching, Magnetic Nanoparticles, and Enzymatic Signal Amplification [ Vol.10, Issue 4 - Autumn Year 2022]
  • Anghajani.Hossein Kinetics analysis of electrophoretic deposition using small signal and large signal modeling, Case study: Nano-Mullite suspension [ Vol.4, Issue 4 - Autumn Year 2016]
  • Anvari.Sayede Razieh Fabrication and Characterization of Nanostructure Functionally Graded Ni-P Electroless Coating [ Vol.4, Issue 1 - Winter Year 2016]
  • Anvari.Sayedeh Zahra Friction Stir Welding of Al 2024 with Al 7075 Alloys and evaluate its structural and mechanical properties [ Vol.6, Issue 4 - Autumn Year 2018]
  • Arabi.Hosein Fabrication and characterization of the Ti-6Al-4V/Mg scaffold [ Vol.3, Issue 2 - Spring Year 2015]
  • Arastouei.Masoud Improving the Properties of the Porous Polylactic Acid Scaffold by Akermanite Nanoparticles for Bone Tissue Engineering [ Vol.8, Issue 2 - Spring Year 2020]
  • arefpour.ahmadreza Effects of Replacing Fluorine with Sodium and Titanium Oxides on Continuous Casting of Steel Mold Powders Lubrication [ Vol.3, Issue 1 - Winter Year 2015]
  • Asadi Asadabad.M. Evaluation of corrosion behaviour on Mn-Cr austenitic steels using 0.1 M HCl solution [ Vol.2, Issue 1 - Winter Year 2014]
  • Asadi.Azam Nanoporous Carbon Spheres Derived from the Leather Leaf as Electrode Materials for Supercapacitors [ Vol.9, Issue 1 - Winter Year 2021]
  • Asadi.Parviz Effect of Tool Pin Shape on Defect-Free FSP and Particles Distribution in SiC/Al6061 Composites [ Vol.9, Issue 1 - Winter Year 2021]
  • Asgari.Hamid Palladium-Cobalt on Reduced Graphene Oxide as an Electro-catalyst for Ethylene Glycol Oxidation in Alkaline Medium: Synthesis and Electrochemical Performance [ Vol.9, Issue 3 - Summer Year 2021]
  • Ashrafi.Ali Modeling and optimization of precipitation hardening heat treatment factors of Al2024 alloy using a two-level full factorial design [ Vol.3, Issue 2 - Spring Year 2015]
  • Ashrafi.Hamid Tribological Properties of Al2024-2wt.%TiO2 Nanocomposite Produced by Mechanical Alloying and Hot-Pressing [ Vol.8, Issue 4 - Autumn Year 2020]
  • Ashrafi.Hamid Effect of Post-Weld Intercritical Annealing on the Microstructure and Tensile Properties of a Gas Tungsten Arc Welded DP700 Steel [ Vol.9, Issue 4 - Autumn Year 2021]
  • Ashrafi.Hamid [ Vol.8, Issue 4 - Autumn Year 2020]
  • Asiabaraki.Hossein Robust Multi-Objective Optimization of Mechanical Properties of Friction Stir Welding Using Neural Network and Modified-NSGA-II [ Vol.9, Issue 2 - Spring Year 2021]
  • askari.masood An investigation on the adsorption behavior of Sb (III) on a cationic ion exchange resin in Fixed-bed column: experimental design and breakthrough curves modeling [ Vol.8, Issue 1 - Winter Year 2020]
  • Asqari.zahra Investigating the Effects of Boron and Zirconium on the High-Temperature Fatigue Behavior of Nimonic 105 Super Alloy [ Vol.10, Issue 3 - Summer Year 2022]
  • ataei.Mohamad Delamination Detection in a Laminated Carbon Composite Plate Using Lamb Wave by Lead-Free Piezoceramic Transducers [ Vol.9, Issue 3 - Summer Year 2021]
  • Atyabi.Seyed Mohmaad Improving the Properties of the Porous Polylactic Acid Scaffold by Akermanite Nanoparticles for Bone Tissue Engineering [ Vol.8, Issue 2 - Spring Year 2020]
  • Azadi Moghaddam.Masoud Using design of experiments approach and simulated annealing algorithm for modeling and Optimization of EDM process parameters [ Vol.6, Issue 3 - Summer Year 2018]
  • Azadi Moghaddam.Masoud Simultaneously Modeling and Optimization of Heat Affected Zone and Tensile Strength in GTAW Process Using Simulated Annealing Algorithm [ Vol.9, Issue 2 - Spring Year 2021]
  • Azimzadeh.Mostafa Characterization and optimization of using calendula offlcinalis extract in fabrication of polycaprolactone-gelatin electrospun nanofibers for wound dressing applications [ Vol.6, Issue 2 - Spring Year 2018]
  • Azizi.Mojdeh Characterization and optimization of using calendula offlcinalis extract in fabrication of polycaprolactone-gelatin electrospun nanofibers for wound dressing applications [ Vol.6, Issue 2 - Spring Year 2018]
  • Azizi.Mojdeh Numerical Simulation of Fluid Flow over a Ceramic Nanoparticle in Drug Delivery System [ Vol.4, Issue 2 - Spring Year 2016]
  • Azizi.Mojdeh Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]

B

  • Babaei.Alireza A new approach for fabrication of bulk MMCs using Accumulative Channel-die Compression Bonding (ACCB) [ Vol.2, Issue 2 - Spring Year 2014]
  • Babagil.Aynur Green Synthesis of Nanoceria (CeO2) and Evaluation of Enzyme like Characteristics [ Vol.6, Issue 3 - Summer Year 2018]
  • Bafandeh.Mohammad Reza Fabrication, Characterization and Osteoblast Response of Cobalt-Based Alloy/Nano Bioactive Glass Composites [ Vol.4, Issue 3 - Summer Year 2016]
  • Baghaei.Ali Inclusion Removal Mechanisms of Al-Killed 304 Low Carbon Stainless Steel Melt Using Hercynite Coated Al2O3-C Ceramic Foam Filters [ Vol.9, Issue 2 - Spring Year 2021]
  • Baghaei.M.R. Punch plastic deformation pipe cladding (PPDPC) as a novel tube cladding method [ Vol.4, Issue 2 - Spring Year 2016]
  • baghaie.shaghaiegh Preparation and Determination of the Characteristics of Hydrogel Membrane of Poly-Vinyl Alchol, Starch and Chitosan [ Vol.9, Issue 1 - Winter Year 2021]
  • Baghban-Eslaminejad.Mohamadreza Poly (lactic-co-glycolic)/nanostructured merwinite porous composites for bone tissue engineering: II. structural and in vitro characterization [ Vol.2, Issue 4 - Autumn Year 2014]
  • Bagheri.Fatemeh Poly (lactic-co-glycolic)/nanostructured merwinite porous composites for bone tissue engineering: II. structural and in vitro characterization [ Vol.2, Issue 4 - Autumn Year 2014]
  • Bagherzadeh.Mojtaba Synthesis, characterization and application of graphene oxide, graphene oxide quantum dots and graphene quantum dots in photoelectrochemical sensors [ Vol.7, Issue 2 - Spring Year 2019]
  • Bagherzadeh.Mojtaba Effect of co-doping on hydrophilic and photoelectric properties of co-doped titania nanoparticles as a composition of electrode modifier [ Vol.7, Issue 3 - Summer Year 2019]
  • Baghi Baghban.Hooman Taguchi optimization of TiO2 thin film to defeat microbiologically induced corrosion of stainless steel [ Vol.7, Issue 1 - Winter Year 2019]
  • Bahmanpour.Maryam Modelling Dependency of the Steady-State Grain Size on the Stacking Fault Energy in Severely Plastic Deformed Materials [ Vol.9, Issue 3 - Summer Year 2021]
  • Bahmanpour.Maryam A New Classical-Quantum Model for Comparing the Magnetization of Ferromagnetic and Superparamagnetic Nanoparticles During Magnetic Hyperthermia [ Vol.10, Issue 3 - Summer Year 2022]
  • Bahrami-Abadi.Mina Reinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber [ Vol.4, Issue 3 - Summer Year 2016]
  • Bahramian.Bahram Schiff base functionalized Fe3O4@Boehmite Core-Shell Nano-Particles to Support MoO2(acac)2 for Catalytic Epoxidation of Alkenes [ Vol.7, Issue 1 - Winter Year 2019]
  • Bahreini.Habibollah The Effect of Multi-Walled Carbon Nanotubes on CO2/N2 Separation Using Sulfonated Polyether Ether Ketone/Polyetherimide Nano Composite Membrane [ Vol.11, Issue 1 - Winter Year 2023]
  • Bakhsheshi Rad.Hamid Reza Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]
  • Bakhsheshi Rad.Hamid Reza Effects of Active Material Particles Size Distribution on the Fabrication of TiNb2O7 Electrode Used in Lithium-Ion Batteries [ Vol.9, Issue 3 - Summer Year 2021]
  • Bakhsheshi Rad.Hamid Reza Polyethylene Glycol Coated NiFe2O4 Nanoparticles Produced by Solution Plasma Method for Biomedical Applications [ Vol.8, Issue 4 - Autumn Year 2020]
  • Bakhsheshi-Rad.Hamid Reza GEP-based Modeling for Predicting Sponge Iron Metallization in Persian Direct Reduction (PERED) Method [ Vol.9, Issue 4 - Autumn Year 2021]
  • Bakhsheshi-Rad.Hamid Reza Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]
  • Bakhsheshi-Rad.Hamid Reza Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
  • Bakhtiari.Leila The Effect of Reverse Pulse Plating and Lanthanum Addition in Plating Bath on Corrosion Resistance of Austenitic Steel in Chlorine Solution [ Vol.9, Issue 3 - Summer Year 2021]
  • Bakhtiarvand.Sogol Polymer-Assisted Synthesis and Characterization of Nickel Aluminate Nanoparticles for Photodegradation of Methylene Blue [ Vol.9, Issue 4 - Autumn Year 2021]
  • baseri.hadi Heavy metals removal from wastewater by using different kinds of magnetite nanoadsorbents: effects of different organic and inorganic coatings on the removal of copper and lead ions [ Vol.4, Issue 4 - Autumn Year 2016]
  • Bashirisafa.Ali Synthesis of (Tix,W1-x)3SiC2 MAX phase by mechanical milling [ Vol.7, Issue 4 - Autumn Year 2019]
  • Bassidi.Touriya Elastic characterization of porous bone by ultrasonic method through Lamb waves [ Vol.5, Issue 2 - Spring Year 2017]
  • Bayat.Omid Age-Hardening Behavior and the Related Changes in a Silver-Copper-Palladium Alloy [ Vol.8, Issue 2 - Spring Year 2020]
  • Beheshtian.Azam Fabrication of Silver Oxide and Nickel Oxide Nanoparticles by Green Synthesis Method Using Malva Sylvestris Plant Extract [ Vol.11, Issue 1 - Winter Year 2023]
  • Bermudez Reyes.Barbara Characterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates [ Vol.6, Issue 1 - Winter Year 2018]
  • Beygi.Reza Thermodynamic analysis of nanocrystalline solid solution formation in the W-Co-Si ternary system by mechanical alloying [ Vol.5, Issue 3 - Summer Year 2017]
  • Beytolamani.Meysam Using design of experiments approach and simulated annealing algorithm for modeling and Optimization of EDM process parameters [ Vol.6, Issue 3 - Summer Year 2018]
  • Beytolamani.Meysam Simultaneously Modeling and Optimization of Heat Affected Zone and Tensile Strength in GTAW Process Using Simulated Annealing Algorithm [ Vol.9, Issue 2 - Spring Year 2021]
  • Boka.Behnaz Effect of Titania Colloid Solution Concentration on Hydrophobicity of Well-Aligned TiO2 Nanorods Synthesized via Hydrothermal Method [ Vol.2, Issue 1 - Winter Year 2014]
  • Borhain.G.H. An investigation on Al6061/TiB2 nano composites production through Mechanical Alloying route and their corrosion behavior [ Vol.6, Issue 2 - Spring Year 2018]
  • Boukhris.Imed Study of charge dynamic and breakdown phenomenon in insulating materials using a bipolar charge transport model [ Vol.8, Issue 2 - Spring Year 2020]
  • Bozorg.Mansoor Inhibitive Assessment of N-(8-bromo-3H-phenoxazin-3-ylidene)-N,N’-Dimethylaminium, as a Novel Corrosion Inhibitor for Mild Steel in 1.0 M HCl [ Vol.2, Issue 3 - Summer Year 2014]

C

  • Cabriales.Roberto Characterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates [ Vol.6, Issue 1 - Winter Year 2018]
  • Ceccatob.R. Sol-gel synthesis and characterization of alumina-15%mullite composite nanopowder [ Vol.2, Issue 1 - Winter Year 2014]
  • Chaghazardi.Zahra Inhibitive Assessment of N-(8-bromo-3H-phenoxazin-3-ylidene)-N,N’-Dimethylaminium, as a Novel Corrosion Inhibitor for Mild Steel in 1.0 M HCl [ Vol.2, Issue 3 - Summer Year 2014]
  • chami.akbar Effect of heating rate on morphological features of oxidized electrolessnickel–boron coatings [ Vol.3, Issue 3 - Summer Year 2015]
  • Chekuri.Ramu Thermal, optical and dielectric studies of VO2+ doped Poly(vinyl chloride)(PVC) films [ Vol.5, Issue 4 - Autumn Year 2017]

D

  • D'ujanga.Florence Effect of Quartz Particle Size on Sintering Behavior and Flexural Strength of Porcelain Tiles Made from Raw Materials in Uganda [ Vol.7, Issue 1 - Winter Year 2019]
  • Dabbaghi.Mahnaz Evaluation of Flow Behavior of Novel Titanium Ti-3873 Alloy Via Compressive Deformation in Two Phase α/β and Single Phase β Regions [ Vol.11, Issue 2 - Spring Year 1402]
  • Dadkhah Tehrani.Mohammad Hassan Structural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique [ Vol.5, Issue 1 - Winter Year 2017]
  • Dadkhah Tehrani.Mohammad Hossein Structural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique [ Vol.5, Issue 1 - Winter Year 2017]
  • Daryaban.Marjan Fine Grain Formation in as Cold Worked SP700 Titanium Alloy and Its Effect on Mechanical and Superplastic Properties [ Vol.11, Issue 2 - Spring Year 1402]
  • Davoodi.anial Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]
  • Davoodi.Sayyed Mohammad Reza Nonlinear Optimization of Hot Metal Profit in Blast Furnace Based on the Decrease of Coke Consumption Rate Case Study: Esfahan Steel Company [ Vol.7, Issue 3 - Summer Year 2019]
  • Dehmolaei.Reza Statistical Approach on Corrosion Behavior of Dissimilar Welds of A387-Gr91/AISI316 Steels with PCGTAW Process [ Vol.5, Issue 1 - Winter Year 2017]
  • Dehmolaei.Reza Optimization of Advanced Square Wave AC-GTAW Parameters to Improve Localized Corrosion Resistance of AA6082-T651 Aluminum Welds [ Vol.8, Issue 2 - Spring Year 2020]
  • Dehmolaei.Reza The Improvement of Mechanical Properties of the Incoloy 825 Weld Metal by Applying Electromagnetic Vibration [ Vol.9, Issue 2 - Spring Year 2021]
  • Dehnavi.Armin Improvement Impact Manufacturing Parameteres of Aluminum Foams [ Vol.6, Issue 4 - Autumn Year 2018]
  • Deilami Azodi.Hamed A Study on the Quasi-static Compression Behavior of 5056 Aluminum Alloy Foams [ Vol.10, Issue 4 - Autumn Year 2022]
  • dezhsetan.arash Production and Characterization of Nano Crystalline Fe85Si10Ni5 Soft Magnetic Alloys by Mechanical Alloying [ Vol.2, Issue 4 - Autumn Year 2014]
  • dilipak.hakan Characterization of Microstructure and Bending Response of Sheet Material: Influence of Thickness [ Vol.3, Issue 1 - Winter Year 2015]
  • Doodman Tipi.Alireza Influence of Converter and inverter on dynamic behavior of the GMAW process [ Vol.2, Issue 4 - Autumn Year 2014]
  • Dost- mohammadi.Ali Reinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber [ Vol.4, Issue 3 - Summer Year 2016]

E

  • Ebadi-Dehaghani.Hassan The Effect of Multi-Walled Carbon Nanotubes on CO2/N2 Separation Using Sulfonated Polyether Ether Ketone/Polyetherimide Nano Composite Membrane [ Vol.11, Issue 1 - Winter Year 2023]
  • Ebadzadeh.Tooraj Sol-gel synthesis and characterization of alumina-15%mullite composite nanopowder [ Vol.2, Issue 1 - Winter Year 2014]
  • Ebadzadeh.Tooraj Kinetics analysis of electrophoretic deposition using small signal and large signal modeling, Case study: Nano-Mullite suspension [ Vol.4, Issue 4 - Autumn Year 2016]
  • Ebiad.Mohamed Shape Selective Pillared Clay Catalysts for P-Xylene Production [ Vol.3, Issue 3 - Summer Year 2015]
  • Ebrahimi.Ramin Fabrication of Aluminum Rectangular Twist Waveguides: Experimental Investigation and FEM Simulation [ Vol.8, Issue 1 - Winter Year 2020]
  • Ebrahimi.Ramin The Effect of Morphology of SOFC Layers Made by 3D Printer on the Electrochemical Properties of the Cell [ Vol.9, Issue 4 - Autumn Year 2021]
  • Ebrahimifar.Hadi Isothermal and cyclic oxidation behavior of AISI 430 ferritic stainless steel coated with titanium [ Vol.6, Issue 2 - Spring Year 2018]
  • Ebrahimifar.Hadi Effect of CTAB surfactant on microstructure and oxidation behavior of Ni-TiO2 Composite coating [ Vol.6, Issue 4 - Autumn Year 2018]
  • Ebrahimifar.Hadi Effect of bath pH on microstructure and corrosion behavior of manganese phosphate coating on SCM420H steel [ Vol.7, Issue 2 - Spring Year 2019]
  • Ebrahimifar.Hadi Influence of electroplating parameters on microstructure and amount of ceramic particle deposition in Ni-Co-CeO2 composite coating [ Vol.7, Issue 4 - Autumn Year 2019]
  • Ebrahimi-Kahrizsangi.Reza Effects of Active Material Particles Size Distribution on the Fabrication of TiNb2O7 Electrode Used in Lithium-Ion Batteries [ Vol.9, Issue 3 - Summer Year 2021]
  • Ebrahimi-Kahrizsangi.Reza Inclusion Removal Mechanisms of Al-Killed 304 Low Carbon Stainless Steel Melt Using Hercynite Coated Al2O3-C Ceramic Foam Filters [ Vol.9, Issue 2 - Spring Year 2021]
  • EbrahimiNaghani.Mohsen Synthesis and Characterization of Linear/Nonlinear Optical Properties of GO, RGO, RGO-ZNO, and RGO-ZNO-Fe2O4 [ Vol.10, Issue 4 - Autumn Year 2022]
  • ebrahimzadeh.iman An investigation on Al6061/TiB2 nano composites production through Mechanical Alloying route and their corrosion behavior [ Vol.6, Issue 2 - Spring Year 2018]
  • ebrahimzadeh.iman Effect of Bonding Time on Microstructure and Mechanical Properties of Transient Liquid Phase Bonding Between WC-Co/St52 [ Vol.11, Issue 1 - Winter Year 2023]
  • Ebrahimzadeh.Iman Age-Hardening Behavior and the Related Changes in a Silver-Copper-Palladium Alloy [ Vol.8, Issue 2 - Spring Year 2020]
  • eghbali.bit allah Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Duplex Stainless Steel [ Vol.2, Issue 4 - Autumn Year 2014]
  • eghbali.bit allah Plastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing [ Vol.4, Issue 1 - Winter Year 2016]
  • eivazi bagheri.Hadi Improving the surface wear resistance of aluminum by electrical discharge process [ Vol.6, Issue 2 - Spring Year 2018]
  • Ektefa.Fatemeh Inhibitive Assessment of N-(8-bromo-3H-phenoxazin-3-ylidene)-N,N’-Dimethylaminium, as a Novel Corrosion Inhibitor for Mild Steel in 1.0 M HCl [ Vol.2, Issue 3 - Summer Year 2014]
  • elahi.hossein The Effects of Oxide Fluxes on the Penetration Depth of 316L and A516 Steels in A-TIG Welding: a Comparative Study [ Vol.10, Issue 2 - Spring Year 2022]
  • Elyasi.Majid CFD Modelling of Friction Stir Welding of Aluminum to Steel butt joint [ Vol.3, Issue 3 - Summer Year 2015]
  • Emadi.Mohammad Experimental Investigation on the dissimilar laser weld joints between Inconel 625 Superalloy and AISI 430 Ferritic Stainless Steel [ Vol.8, Issue 1 - Winter Year 2020]
  • emamalizadeh.mehdi Investigation of the Factors Affecting on the Granulation of ZrB2 Nano-Particles Synthesized by Using Na Metal as Reductant [ Vol.8, Issue 2 - Spring Year 2020]
  • Emami.Amir Hossein Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]
  • emami.iman Chemical Reaction, Substructure, and Mechanical Behavior of Spinel MgAl2O4, Mullite, and Forsterite Nanocrystallines by Applying Mechanochemical Process and Subsequent Three-Step Heat Treatment [ Vol.10, Issue 3 - Summer Year 2022]
  • Emami.Masood Utilization of Microalloying with Rare Earth Elements and Hot Extrusion for Remarkable Grain Refinement and Enhancement of Mechanical Properties of as-Cast Magnesium Alloy [ Vol.8, Issue 4 - Autumn Year 2020]
  • Emami.Mohammad The Effects of Oxide Fluxes on the Penetration Depth of 316L and A516 Steels in A-TIG Welding: a Comparative Study [ Vol.10, Issue 2 - Spring Year 2022]
  • Emami.Mohammad Effects of Fe and Si Additions on Erosion-Oxidation Behavior of Nickel Alloys in Chlorine-Containing Oxidative Atmospheres [ Vol.10, Issue 4 - Autumn Year 2022]
  • Emami.S.A. A Kinetic Study of Vanadium Dissolution During Acetic Acid Leaching of Steel Making Converter Slag [ Vol.8, Issue 4 - Autumn Year 2020]
  • Enayati.Mohammad Hossein Effects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts [ Vol.4, Issue 1 - Winter Year 2016]
  • Enayati.Mohammad-Hossein Fabrication and Characterization of Nanostructure Functionally Graded Ni-P Electroless Coating [ Vol.4, Issue 1 - Winter Year 2016]
  • Enayati.Mohammad-Hossein The tribological properties of Cu-Ni3Al-MoS2 composite coating deposited by magnetron sputtering [ Vol.4, Issue 4 - Autumn Year 2016]
  • Enayati.Mohammad-Hossein Fabricating the Tribological Properties and Investigating of Ni3Al-MoS2 Composite Coating [ Vol.9, Issue 1 - Winter Year 2021]
  • Erfani Gahrouei.Zeinab Fabrication of anodic aluminium oxide template and the generation of magnetic Co nanowires within it [ Vol.7, Issue 4 - Autumn Year 2019]
  • Erfani Gahrouei.Zeinab Fabrication of the Ordered Nanocells of Anodic Aluminum Oxide and the Generation of Zn-Mn Ferrite Phase within Them [ Vol.7, Issue 2 - Spring Year 2019]
  • Erfanian.Mojdeh Effect of different yield functions on computations of forming limit curves for aluminum alloy sheets [ Vol.6, Issue 3 - Summer Year 2018]
  • Esfahanian.Marzieh Thymus Carmanicus Mediated Synthesis of Zero Valent Iron Nanoparticles at Alkaline pH and Studies on Their Antibacterial Activity [ Vol.11, Issue 1 - Winter Year 2023]
  • Eshaghpour Soorani.Mohsen Crystallization Kinetics Study in Al87Ni10La3 Amorphous Alloy [ Vol.6, Issue 3 - Summer Year 2018]
  • Eshraghi.Mohamad Javad Band-Gap Tuning Of Electron Beam Evaporated Cds Thin Films [ Vol.4, Issue 4 - Autumn Year 2016]
  • Eskandari.Arvin Effect of Heat Treatment on Structural and Magnetic Properties of Nanocrystalline SrFe12O19 Hexaferrite synthesized by Co-Precipitation Method [ Vol.1, Issue 4 - Autumn Year 2013]
  • Eslami.Fateme Hydroxyapatite Nano-Particles Extracted from Miscellaneous Bestial Resources: Study of Crystal Structure and Microstructure [ Vol.8, Issue 3 - Summer Year 2020]
  • Esmaeili.Saeid Fabrication of polycaprolactone and polylactic acid shapeless scaffolds via fused deposition modelling technology [ Vol.7, Issue 4 - Autumn Year 2019]
  • Etemad.Arash Application of mesoporous silica containing benzotriazole in the epoxy coating applied to plain carbon steel and study of its corrosion behavior [ Vol.6, Issue 3 - Summer Year 2018]
  • Etemad.Arash Addition of Mo in the Zn based alloy coating in the citrate solution and investigation of its corrosion behavior [ Vol.7, Issue 1 - Winter Year 2019]

F

  • fahami.mohammad Estimation of the mean grain size of mechanically induced Hydroxyapatite based bioceramics via artificial neural network [ Vol.5, Issue 2 - Spring Year 2017]
  • Falamaki.Kavoos Corrosion Properties of 70SiO2-15TiO2-15ZrO2 Ceramic Membrane [ Vol.2, Issue 3 - Summer Year 2014]
  • Faraji.Ghader Upper bound and numerical analysis of cyclic expansion extrusion (CEE) process [ Vol.5, Issue 2 - Spring Year 2017]
  • Faraji.Ghader Plastic deformation analysis in parallel tubular channel angular pressing (PTCAP) [ Vol.1, Issue 4 - Autumn Year 2013]
  • Faraji.Ghader A new approach for achieving excellent strain homogeneity in tubular channel angular pressing (TCAP) process [ Vol.2, Issue 1 - Winter Year 2014]
  • Faraji.Ghader Numerical investigation of strain distribution during cyclic expansion extrusion (CEE) [ Vol.3, Issue 2 - Spring Year 2015]
  • Faraji.Ghader Size effect in equal channel angular pressing (ECAP) process [ Vol.3, Issue 3 - Summer Year 2015]
  • Faraji.Ghader Optimization of ECMAP parameters in production of ultra-fine grained Al1050 strips using Grey relational analysis [ Vol.3, Issue 4 - Autumn Year 2015]
  • Faraji.Ghader Punch plastic deformation pipe cladding (PPDPC) as a novel tube cladding method [ Vol.4, Issue 2 - Spring Year 2016]
  • Faraji.Ghader Modeling and production of high strength Al strips by equal channel multi angular pressing method [ Vol.3, Issue 4 - Autumn Year 2015]
  • Faraji.Ghader Numerical Analysis of Severe Plastic Deformation by High Pressure Torsion [ Vol.4, Issue 2 - Spring Year 2016]
  • Faraji.Ghader Evaluation of Microstructure and Tensile Behavior of Fine-Grained AZ61 Alloy Tube Processed by Severe Plastic Deformation [ Vol.7, Issue 3 - Summer Year 2019]
  • Faraji.Ghader Thermo-Mechanical Analysis of Wire Drawing of Copper with PCD die: FEM Study [ Vol.10, Issue 3 - Summer Year 2022]
  • Faraji.Ghader Effects of Equal Channel Angular Pressing (ECAP) Process with an Additional Expansion-Extrusion Stage on Microstructure and Mechanical Properties of Mg–9Al–1Zn [ Vol.9, Issue 4 - Autumn Year 2021]
  • Farajpour.Mehdi Simulation of Heat Transfer and Recrystallization in Aluminum Alloy AA 6070 by TIG Welding Method [ Vol.5, Issue 4 - Autumn Year 2017]
  • farhadipoor.pedram Investigation of Roll Bonding between AA5083 Strips [ Vol.4, Issue 3 - Summer Year 2016]
  • Farmanesh.Khosro Effect of TiO2 nanoparticles on the bond strength of CP Ti sheet by cold Rolling method [ Vol.5, Issue 1 - Winter Year 2017]
  • Farshbaf.Mohmood Effect of silver interlayer on transient liquid phase (TLP) bonding of Al2024 to Ti-6Al-4V joints [ Vol.8, Issue 1 - Winter Year 2020]
  • Farshidi.Mohammad Hassan Optimization of die geometry for Tube Channel Pressing [ Vol.6, Issue 1 - Winter Year 2018]
  • Farvizi.Mohammad Determination of solution temperature in an ex-service Ni-based turbine blade [ Vol.5, Issue 3 - Summer Year 2017]
  • Fata.Ali Evaluation of Microstructure and Tensile Behavior of Fine-Grained AZ61 Alloy Tube Processed by Severe Plastic Deformation [ Vol.7, Issue 3 - Summer Year 2019]
  • Fata.Ali Effects of Equal Channel Angular Pressing (ECAP) Process with an Additional Expansion-Extrusion Stage on Microstructure and Mechanical Properties of Mg–9Al–1Zn [ Vol.9, Issue 4 - Autumn Year 2021]
  • Fathi.Farshid Effect of Nano-MgO Additive on Compressive Strength of Concrete Fabricated by Different Processing Methods [ Vol.10, Issue 1 - Winter Year 2022]
  • fathi.Mohammad Hossein The Effect of sintering temperature on microstructure and hardness of milled WC- 20 wt.% equiatomic (Fe,Co) cemented carbides [ Vol.3, Issue 1 - Winter Year 2015]
  • fathi.Mohammad Hossein Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling [ Vol.2, Issue 3 - Summer Year 2014]
  • Fathi.Mohammad Hossein Fabrication, Characterization and Osteoblast Response of Cobalt-Based Alloy/Nano Bioactive Glass Composites [ Vol.4, Issue 3 - Summer Year 2016]
  • Fattah-alhosseini.arash Evaluation of corrosion behaviour on Mn-Cr austenitic steels using 0.1 M HCl solution [ Vol.2, Issue 1 - Winter Year 2014]
  • Fattah-alhosseini.arash Semiconducting properties of passive films formed on AISI 420 stainless steel in nitric acid solutions [ Vol.1, Issue 4 - Autumn Year 2013]
  • Fattah-alhosseini.arash Passivity of AISI 316L stainless steel as a function of nitric concentration [ Vol.2, Issue 2 - Spring Year 2014]
  • fazelinezhad.habib Chemical Reaction, Substructure, and Mechanical Behavior of Spinel MgAl2O4, Mullite, and Forsterite Nanocrystallines by Applying Mechanochemical Process and Subsequent Three-Step Heat Treatment [ Vol.10, Issue 3 - Summer Year 2022]
  • Fazlali.Pardis In vitro behavior of silk fibroin-coated calcium magnesium silicate scaffolds [ Vol.4, Issue 1 - Winter Year 2016]
  • Fekri Dolatabad.Parisa Fabrication of Al7075-MWCNT Composite Powder by Recycling Aluminum Alloy Chips Via High Energy Milling and Alloying [ Vol.9, Issue 3 - Summer Year 2021]
  • Firouzi.Mehdi GEP-based Modeling for Predicting Sponge Iron Metallization in Persian Direct Reduction (PERED) Method [ Vol.9, Issue 4 - Autumn Year 2021]
  • Firouzi.Mojtaba GEP-based Modeling for Predicting Sponge Iron Metallization in Persian Direct Reduction (PERED) Method [ Vol.9, Issue 4 - Autumn Year 2021]

G

  • gökmeşe.Hakan Characterization of Microstructure and Bending Response of Sheet Material: Influence of Thickness [ Vol.3, Issue 1 - Winter Year 2015]
  • G.RAVICHANDRAN Fatigue Characterization of High Performance Hybrid Aluminium AA 5083/SiCp/Fly Ash Metal Matrix Composites [ Vol.7, Issue 2 - Spring Year 2019]
  • Gafarzadeh.Hossein A new approach for fabrication of bulk MMCs using Accumulative Channel-die Compression Bonding (ACCB) [ Vol.2, Issue 2 - Spring Year 2014]
  • Gafarzadeh.Hossein Continuous Grain Refinement of Pure Aluminum During Cyclic Contraction/Expansion Extrusion (CCEE) Analyses by Micromechanical-Based FE and Experimental Methods [ Vol.11, Issue 1 - Winter Year 2023]
  • Ganjali.Mansoureh Characterization of nanostructured SnO2 thin film coated by Ag nanoparticles [ Vol.2, Issue 2 - Spring Year 2014]
  • Ganjali.Mansoureh Effect of Heat Treatment on Structural and Magnetic Properties of Nanocrystalline SrFe12O19 Hexaferrite synthesized by Co-Precipitation Method [ Vol.1, Issue 4 - Autumn Year 2013]
  • Ganjali.Monireh Characterization of nanostructured SnO2 thin film coated by Ag nanoparticles [ Vol.2, Issue 2 - Spring Year 2014]
  • Ganjali.Monireh Effect of Heat Treatment on Structural and Magnetic Properties of Nanocrystalline SrFe12O19 Hexaferrite synthesized by Co-Precipitation Method [ Vol.1, Issue 4 - Autumn Year 2013]
  • ghadiri.masoud Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying [ Vol.2, Issue 3 - Summer Year 2014]
  • Ghaemi.Ahad Comparing the capability of various models for predicting of the Bayer process parameters [ Vol.6, Issue 1 - Winter Year 2018]
  • Ghani Kolahloo.Niloofar Synthesis of zinc aluminate (ZnAl2O4) by mechanochemical processing with different molar ratios of ZnS:Al [ Vol.8, Issue 1 - Winter Year 2020]
  • Ghannad.Mehdi Effect of Material Gradient on Stresses of FGM Rotating Thick-Walled Cylindrical Pressure Vessel with Longitudinal Variation of Properties under Non-uniform Internal and External Pressure [ Vol.4, Issue 2 - Spring Year 2016]
  • Gharagozloua.Mehrnaz Amelioration of the acid blue oxidation process by as-synthesized ZnO nanoparticles: Optimization of the dye and photocatalyst concentration together with the pH of the solution [ Vol.6, Issue 2 - Spring Year 2018]
  • Gharahkhani.Raziyeh Fabrication, Characterization and Osteoblast Response of Cobalt-Based Alloy/Nano Bioactive Glass Composites [ Vol.4, Issue 3 - Summer Year 2016]
  • gharavi.farhad Study the effect of the friction stir process on the microstructure and mechanical behavior of the AZ31 as-cast alloy joint [ Vol.7, Issue 2 - Spring Year 2019]
  • gharavi.farhad Investigation on High Temperature Wear Resistance of Cryotreated Hot Work Tool Steel [ Vol.7, Issue 3 - Summer Year 2019]
  • Gharavi.Farhad An investigation on Al6061/TiB2 nano composites production through Mechanical Alloying route and their corrosion behavior [ Vol.6, Issue 2 - Spring Year 2018]
  • Gharehchahi.Hamidreza New Iteration based Algorithm for Shape Optimization of Internal and External Boundaries of the Initial Blank in the Deep Drawing Process [ Vol.8, Issue 3 - Summer Year 2020]
  • Gharibi.Mahboobeh Effect of Material Gradient on Stresses of Thick FGM Spherical Pressure Vessels with Exponentially-Varying Properties [ Vol.2, Issue 3 - Summer Year 2014]
  • Ghasemi.Farshad Damage detection and structural health monitoring of ST-37 plate using smart materials and signal processing by artificial neural networks [ Vol.5, Issue 3 - Summer Year 2017]
  • Ghasemi.Samad Synthesis of (Tix,W1-x)3SiC2 MAX phase by mechanical milling [ Vol.7, Issue 4 - Autumn Year 2019]
  • Ghashang.Majid Magnetic and Structural Characteristics of Fe2O3 Nanostructure Synthesized in the Presence of Sour Cherry Juice [ Vol.4, Issue 3 - Summer Year 2016]
  • Ghassemi.Aazam Using of Thermoplastic Polyurethane Granule (TPU) as a Reinforcing Phase and Self-Healing Agent in a Polymer Composite Resin Epoxy to Exhibit Mechanical Properties Recovery [ Vol.10, Issue 2 - Spring Year 2022]
  • Ghayour.Hamid Effect of Titania Colloid Solution Concentration on Hydrophobicity of Well-Aligned TiO2 Nanorods Synthesized via Hydrothermal Method [ Vol.2, Issue 1 - Winter Year 2014]
  • Ghayour.Hamid A New Classical-Quantum Model for Comparing the Magnetization of Ferromagnetic and Superparamagnetic Nanoparticles During Magnetic Hyperthermia [ Vol.10, Issue 3 - Summer Year 2022]
  • ghazi mir saeed.seyed Mahdi The Effect of Magnesium on the Microstructure and Stress Rupture Properties of Hastelloy X Supealloy [ Vol.7, Issue 3 - Summer Year 2019]
  • Ghazitabar.Arash Hydrochemically separation of gold from Copper Anode Slime by means of Thiourea solution [ Vol.5, Issue 1 - Winter Year 2017]
  • Ghobadi.Moslem Prediction of Corrosion Rate for Carbon Steel in Soil Environment by Artificial Neural Network and Genetic Algorithm [ Vol.7, Issue 4 - Autumn Year 2019]
  • Gholamzadeh.Parisa Inhibitive Assessment of N-(8-bromo-3H-phenoxazin-3-ylidene)-N,N’-Dimethylaminium, as a Novel Corrosion Inhibitor for Mild Steel in 1.0 M HCl [ Vol.2, Issue 3 - Summer Year 2014]
  • Gholipoor.Alireza Effect of Milling Time on Hydrogen Desorption Properties of Nanocrystalline MgH2 [ Vol.2, Issue 3 - Summer Year 2014]
  • Gholizadeh.Ahmad Effect of Sr substitution on structural, redox and catalytic properties of nano-particles La1-xSrxMn0.5Co0.5O3 (x = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5) as a catalyst for CO oxidation [ Vol.2, Issue 4 - Autumn Year 2014]
  • Gholizadeh.Ahmad X-ray peak broadening analysis in LaMnO3+δ nano-particles with rhombohedral crystal structure [ Vol.3, Issue 3 - Summer Year 2015]
  • ghoneim.iman Processing of aluminum flake powder via high energy ball milling under different conditions reaching to aluminum nanoparticles [ Vol.7, Issue 2 - Spring Year 2019]
  • Ghorbani.zahra Investigation on High Temperature Wear Resistance of Cryotreated Hot Work Tool Steel [ Vol.7, Issue 3 - Summer Year 2019]
  • Ghorbanzadeh.Milad Effects of Active Material Particles Size Distribution on the Fabrication of TiNb2O7 Electrode Used in Lithium-Ion Batteries [ Vol.9, Issue 3 - Summer Year 2021]
  • Givianrad.Mohammad Hadi Fabrication of Silver Oxide and Nickel Oxide Nanoparticles by Green Synthesis Method Using Malva Sylvestris Plant Extract [ Vol.11, Issue 1 - Winter Year 2023]
  • Golabgir.Mohammad Hossein The Effect of the Mg Content on Mechanosynthesis of ZrB2–SiC–ZrC Composite in the Mg/ZrSiO4/B2O3/C System [ Vol.3, Issue 2 - Spring Year 2015]
  • Golestanifard.Farhad Electrochemical properties of iron oxide nanoparticles as an anode for Li-ion batteries [ Vol.3, Issue 4 - Autumn Year 2015]
  • Golestanipour.Masoud Improvement Impact Manufacturing Parameteres of Aluminum Foams [ Vol.6, Issue 4 - Autumn Year 2018]
  • Golmohammad.Mohammad Electrochemical properties of iron oxide nanoparticles as an anode for Li-ion batteries [ Vol.3, Issue 4 - Autumn Year 2015]
  • golparvaran.saeed Plasma Influence of Surface Texture of Silicone Rubber for Biomedical Application in Scala Tympani [ Vol.9, Issue 2 - Spring Year 2021]
  • Gorji.Abdolhamid Improving the surface wear resistance of aluminum by electrical discharge process [ Vol.6, Issue 2 - Spring Year 2018]
  • Gorji-Bandpy.M. Solidification and thermal performance analysis of the low carbon steel during the continuous casting process [ Vol.5, Issue 3 - Summer Year 2017]
  • gozalzadeh.sahel Plastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing [ Vol.4, Issue 1 - Winter Year 2016]
  • Guerra.Lizangela Characterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates [ Vol.6, Issue 1 - Winter Year 2018]
  • Gutierrez Martinez.Manuel Characterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates [ Vol.6, Issue 1 - Winter Year 2018]

H

  • Hadad.M.J Evaluation of Microstructure and Tensile Behavior of Fine-Grained AZ61 Alloy Tube Processed by Severe Plastic Deformation [ Vol.7, Issue 3 - Summer Year 2019]
  • Hadi.Morteza Age-Hardening Behavior and the Related Changes in a Silver-Copper-Palladium Alloy [ Vol.8, Issue 2 - Spring Year 2020]
  • Hadiyan.Behzad Forming limit curves of AA3105 on multiple temperature conditions: numerical investigation and experimental verification [ Vol.7, Issue 1 - Winter Year 2019]
  • Hafezi.Masoud In vitro behavior of silk fibroin-coated calcium magnesium silicate scaffolds [ Vol.4, Issue 1 - Winter Year 2016]
  • Hafezi.Masoud Poly (lactic-co-glycolic)/nanostructured merwinite porous composites for bone tissue engineering: II. structural and in vitro characterization [ Vol.2, Issue 4 - Autumn Year 2014]
  • Hafezi.Masoud Synthesis of nano-structured sphene and mechanical properties optimization of its scaffold via response surface methodology [ Vol.4, Issue 2 - Spring Year 2016]
  • Haghighi Rofigar.Amir Crystallization Kinetics Study in Al87Ni10La3 Amorphous Alloy [ Vol.6, Issue 3 - Summer Year 2018]
  • Haghighi.Mohammad Synthesis of Nanostructured MnNiAPSO-34 Catalyst: Catalytic Properties and Performance [ Vol.2, Issue 2 - Spring Year 2014]
  • Hajian Heidary.Mostafa Effect of silver interlayer on transient liquid phase (TLP) bonding of Al2024 to Ti-6Al-4V joints [ Vol.8, Issue 1 - Winter Year 2020]
  • hajiannia.iman The Weldability Evaluation of Dissimilar Welds of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel by Gastungesten Arc Welding [ Vol.1, Issue 4 - Autumn Year 2013]
  • Hajisafari.Mahmoud Fatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution [ Vol.5, Issue 3 - Summer Year 2017]
  • HAKIMI.JAVAD Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]
  • hakimyfard.َAlireza Effects of reaction temperature and raw material type on optical properties and crystal phase growth of Solid state synthesized NiSb2O6 nanomaterials [ Vol.5, Issue 4 - Autumn Year 2017]
  • hakimyfard.َAlireza Photocatalytic degradation of Malachite Green by Sr3MxAl2O6+δ ﴾M=None, Sm3+, Eu3+, Ho3+ and Yb3+) nanomaterial as an excellent and recyclable photocatalyst [ Vol.8, Issue 1 - Winter Year 2020]
  • Haryono.Agus Synthesis of the Nano structured Zinc Oxide Using the Soft template of Cylea barbata miers Extract and its Promising Property for Dye Adsorbent [ Vol.3, Issue 1 - Winter Year 2015]
  • Hasani.Amir Effect of Twist Extrusion Process on the Mechanical Properties and Microstructure Evolution of 70-30 Brass Alloy [ Vol.6, Issue 4 - Autumn Year 2018]
  • Hasani.Elham Structural, Optical and Ultra-Violet Photodetection Properties of ZnO Nanorods with Various Aspect Ratios [ Vol.4, Issue 3 - Summer Year 2016]
  • Hashemi.Ramin Effect of different yield functions on computations of forming limit curves for aluminum alloy sheets [ Vol.6, Issue 3 - Summer Year 2018]
  • Hashemi.Ramin Forming limit curves of AA3105 on multiple temperature conditions: numerical investigation and experimental verification [ Vol.7, Issue 1 - Winter Year 2019]
  • hasheminia.s Sintering of Glass - Steel Slag-SiC Composite as a Foam [ Vol.8, Issue 3 - Summer Year 2020]
  • Hassan Alipouri Fard.Sina Continuous Grain Refinement of Pure Aluminum During Cyclic Contraction/Expansion Extrusion (CCEE) Analyses by Micromechanical-Based FE and Experimental Methods [ Vol.11, Issue 1 - Winter Year 2023]
  • Hassanjani-Roshan.Amir Characterization of nanostructured SnO2 thin film coated by Ag nanoparticles [ Vol.2, Issue 2 - Spring Year 2014]
  • Hassankhani.Asadollah From egg shell wastes (ESWs) into advanced materials: A rapid and simple synthesis of CaO/Ca2Fe2O5 as a novel nanocomposite-derived ESW biomaterial [ Vol.6, Issue 3 - Summer Year 2018]
  • Hassanzadeh Tabrizi.S.A. Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]
  • Hassanzadeh Tabrizi.S.A. Polyethylene Glycol Coated NiFe2O4 Nanoparticles Produced by Solution Plasma Method for Biomedical Applications [ Vol.8, Issue 4 - Autumn Year 2020]
  • Hassanzadeh Tabrizi.S.A. Polymer-Assisted Synthesis and Characterization of Nickel Aluminate Nanoparticles for Photodegradation of Methylene Blue [ Vol.9, Issue 4 - Autumn Year 2021]
  • Hassanzadeh Tabrizi.S.A. Delamination Detection in a Laminated Carbon Composite Plate Using Lamb Wave by Lead-Free Piezoceramic Transducers [ Vol.9, Issue 3 - Summer Year 2021]
  • Hassanzadeh Tabrizi.S.A. Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]
  • Hassanzadeh.S.A. An optimization and characterization study on sodium ferrate production by electrochemical method [ Vol.7, Issue 4 - Autumn Year 2019]
  • HassanzadehTabrizi.Ali Effect of Nano-MgO Additive on Compressive Strength of Concrete Fabricated by Different Processing Methods [ Vol.10, Issue 1 - Winter Year 2022]
  • Hassanzadeh-Tabrizi.Sayed Ali Polyacrylamide synthesis of nanostructured copper aluminate for photocatalytic application [ Vol.5, Issue 4 - Autumn Year 2017]
  • Hayashi.Shigenari Effects of Fe and Si Additions on Erosion-Oxidation Behavior of Nickel Alloys in Chlorine-Containing Oxidative Atmospheres [ Vol.10, Issue 4 - Autumn Year 2022]
  • Hayati.Raziye Synthesis of zinc aluminate (ZnAl2O4) by mechanochemical processing with different molar ratios of ZnS:Al [ Vol.8, Issue 1 - Winter Year 2020]
  • he.peiyuan Numerical Modeling of the Shear Module of Alginate Micro-Beads under the Ultrasonic Thermal Effect [ Vol.4, Issue 3 - Summer Year 2016]
  • Heidari.Ali Effect of Nano-MgO Additive on Compressive Strength of Concrete Fabricated by Different Processing Methods [ Vol.10, Issue 1 - Winter Year 2022]
  • Heidarpour.Akbar Crystallization Kinetics Study in Al87Ni10La3 Amorphous Alloy [ Vol.6, Issue 3 - Summer Year 2018]
  • Heidarpour.Akbar FSP pass number and cooling effects on the microstructure and properties of AZ31 [ Vol.6, Issue 2 - Spring Year 2018]
  • Heidarpour.Akbar On the fabrication and characterization of Al5083/Al2O3 surface nanocomposite via friction stir processing [ Vol.5, Issue 2 - Spring Year 2017]
  • Heidarpour.Akbar Synthesis of (Tix,W1-x)3SiC2 MAX phase by mechanical milling [ Vol.7, Issue 4 - Autumn Year 2019]
  • Hematian.Mohadeseh Schiff base functionalized Fe3O4@Boehmite Core-Shell Nano-Particles to Support MoO2(acac)2 for Catalytic Epoxidation of Alkenes [ Vol.7, Issue 1 - Winter Year 2019]
  • heydari vini.mohammad Investigation of Roll Bonding between AA5083 Strips [ Vol.4, Issue 3 - Summer Year 2016]
  • Honarpisheh.Mohammad Microstructure evolution and mechanical properties of Mo40/C93200 bimetal processed by compound casting process [ Vol.6, Issue 1 - Winter Year 2018]
  • Hoosseiniara.R Nonlinear bucking analysis of Polystyrene, Polyvinyl chloride, and Polypropylene cylindrical nano-composite shells reinforced by carbon nanotubes based on micro-mechanics and finite element methods [ Vol.5, Issue 4 - Autumn Year 2017]
  • hormozi.kourosh Chemical Reaction, Substructure, and Mechanical Behavior of Spinel MgAl2O4, Mullite, and Forsterite Nanocrystallines by Applying Mechanochemical Process and Subsequent Three-Step Heat Treatment [ Vol.10, Issue 3 - Summer Year 2022]
  • Hosseini Faregh.Sara Effect of Twist Extrusion Process on the Mechanical Properties and Microstructure Evolution of 70-30 Brass Alloy [ Vol.6, Issue 4 - Autumn Year 2018]
  • Hosseini Sani.Seyed Kamal Influence of Converter and inverter on dynamic behavior of the GMAW process [ Vol.2, Issue 4 - Autumn Year 2014]
  • hosseini.mostafa Using of Thermoplastic Polyurethane Granule (TPU) as a Reinforcing Phase and Self-Healing Agent in a Polymer Composite Resin Epoxy to Exhibit Mechanical Properties Recovery [ Vol.10, Issue 2 - Spring Year 2022]
  • Hossienzadeh.Morteza CFD Modelling of Friction Stir Welding of Aluminum to Steel butt joint [ Vol.3, Issue 3 - Summer Year 2015]

I

  • isvand zibaei.mohammad reza Investigation of Influence External Pressures on Vibration of Thin-Walled Cylindrical Shell Supported Composed of Functionally Graded Materials [ Vol.6, Issue 1 - Winter Year 2018]
  • isvand zibaei.mohammad reza Effects of Power-Law Distribution and Exponential with Uniform Pressures on Vibration Behavior of Reinforced Cylindrical Shell Made of Functionally Graded Materials under Symmetric Boundary Conditions [ Vol.4, Issue 4 - Autumn Year 2016]
  • isvand zibaei.mohammad reza Influence of Power Law Distribution with Pressure on the Frequencies of Supported Functionally Graded Material Cylindrical Shell with C-SL and F-SS Boundary Conditions [ Vol.9, Issue 1 - Winter Year 2021]
  • Iyzadi.B. Evaluation of corrosion behaviour on Mn-Cr austenitic steels using 0.1 M HCl solution [ Vol.2, Issue 1 - Winter Year 2014]
  • Izadpanahi.Amir Improvement Impact Manufacturing Parameteres of Aluminum Foams [ Vol.6, Issue 4 - Autumn Year 2018]

J

  • Jabbari.Mehdi Effect of Material Gradient on Stresses of FGM Rotating Thick-Walled Cylindrical Pressure Vessel with Longitudinal Variation of Properties under Non-uniform Internal and External Pressure [ Vol.4, Issue 2 - Spring Year 2016]
  • Jabbarzare.Saied Chemical Reaction, Substructure, and Mechanical Behavior of Spinel MgAl2O4, Mullite, and Forsterite Nanocrystallines by Applying Mechanochemical Process and Subsequent Three-Step Heat Treatment [ Vol.10, Issue 3 - Summer Year 2022]
  • Jafari Nodoushan.Milad Improving the Properties of the Porous Polylactic Acid Scaffold by Akermanite Nanoparticles for Bone Tissue Engineering [ Vol.8, Issue 2 - Spring Year 2020]
  • Jafari Tadi.Abdolreza Structural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique [ Vol.5, Issue 1 - Winter Year 2017]
  • Jafari.Abdol Hamid An investigation on the adsorption behavior of Sb (III) on a cationic ion exchange resin in Fixed-bed column: experimental design and breakthrough curves modeling [ Vol.8, Issue 1 - Winter Year 2020]
  • Jafari.Abdolhamid The Effect of Reverse Pulse Plating and Lanthanum Addition in Plating Bath on Corrosion Resistance of Austenitic Steel in Chlorine Solution [ Vol.9, Issue 3 - Summer Year 2021]
  • Jafari.Fatemeh Recycling Evaluation of Mill Scale in Electric Arc Furnace [ Vol.2, Issue 3 - Summer Year 2014]
  • Jafari.Javad Damage detection and structural health monitoring of ST-37 plate using smart materials and signal processing by artificial neural networks [ Vol.5, Issue 3 - Summer Year 2017]
  • Jafari.Mostafa Linear and Nonlinear Optical Properties in CdSe/ZnS/CdSe and ZnS/CdSe/ZnS Spherical Core-Shell-Shell Quantum Dots [ Vol.11, Issue 1 - Winter Year 2023]
  • Jafarzadeh.Mohammad Ali Recycling Evaluation of Mill Scale in Electric Arc Furnace [ Vol.2, Issue 3 - Summer Year 2014]
  • Jahanshir.Arezu Relativistic Modification of the Exciton’s mass in Monolayer TMDCs Materials [ Vol.8, Issue 4 - Autumn Year 2020]
  • Jalali Azizpour.mehdi Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings [ Vol.1, Issue 4 - Autumn Year 2013]
  • Jamshidi.Amin The Effect of the Mg Content on Mechanosynthesis of ZrB2–SiC–ZrC Composite in the Mg/ZrSiO4/B2O3/C System [ Vol.3, Issue 2 - Spring Year 2015]
  • Javaheri.Mobin Microstructure evolution and mechanical properties of Mo40/C93200 bimetal processed by compound casting process [ Vol.6, Issue 1 - Winter Year 2018]
  • Jazayeri Gharehbagh.Ali Effect of Heat Treatment Time on the Characteristics of Coating Formed on Nanocrystalline Finemet Foils [ Vol.4, Issue 1 - Winter Year 2016]
  • ji.zhenyu Numerical Modeling of the Shear Module of Alginate Micro-Beads under the Ultrasonic Thermal Effect [ Vol.4, Issue 3 - Summer Year 2016]
  • Jula.Mohammad Statistical Approach on Corrosion Behavior of Dissimilar Welds of A387-Gr91/AISI316 Steels with PCGTAW Process [ Vol.5, Issue 1 - Winter Year 2017]

K

  • K.Bhagyasree Thermal, optical and dielectric studies of VO2+ doped Poly(vinyl chloride)(PVC) films [ Vol.5, Issue 4 - Autumn Year 2017]
  • kaji.mohammadreza Numerical Analysis of Severe Plastic Deformation by High Pressure Torsion [ Vol.4, Issue 2 - Spring Year 2016]
  • Kalantari.Seyed Mohammad Study on compressive and compatibility properties of titanium functionally graded scaffolds (FGSs) as bone replacements [ Vol.6, Issue 3 - Summer Year 2018]
  • Kalantari.Seyed Mohammad Fabrication and characterization of the Ti-6Al-4V/Mg scaffold [ Vol.3, Issue 2 - Spring Year 2015]
  • Kalantarzadeh.Fatemeh Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]
  • Kanny.Krishnan Extraction of Hemicellulose and Lignin from Sugarcane Bagasse for Biopolymer Films: Green Process [ Vol.6, Issue 3 - Summer Year 2018]
  • karamian.ebrahim Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
  • karamian.Ebrahim Novel BCP-Bioactive Glass-Akermanite/PCL Composite Scaffold: Physical and Mechanical Behavior, and in Vitro Bioactivity [ Vol.8, Issue 3 - Summer Year 2020]
  • karamian.Ebrahim Evolution of Biological Properties of Bioactive Diopside and Wollastonite for Bone Tissue Engineering [ Vol.10, Issue 1 - Winter Year 2022]
  • Karbasi.Maryam The Effect of sintering temperature on microstructure and hardness of milled WC- 20 wt.% equiatomic (Fe,Co) cemented carbides [ Vol.3, Issue 1 - Winter Year 2015]
  • Karbasi.Maryam Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling [ Vol.2, Issue 3 - Summer Year 2014]
  • Karbasi.Minoo The Effect of sintering temperature on microstructure and hardness of milled WC- 20 wt.% equiatomic (Fe,Co) cemented carbides [ Vol.3, Issue 1 - Winter Year 2015]
  • Karbasi.Minoo Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling [ Vol.2, Issue 3 - Summer Year 2014]
  • Kardi.Hossein Recycling Evaluation of Mill Scale in Electric Arc Furnace [ Vol.2, Issue 3 - Summer Year 2014]
  • Kargar Razi.M. Development and Evaluation of Nanomagnetic Carrier for the Controlled Loading and Release of Celecoxib [ Vol.10, Issue 1 - Winter Year 2022]
  • Kargar.Mahboubeh Magnetic and Structural Characteristics of Fe2O3 Nanostructure Synthesized in the Presence of Sour Cherry Juice [ Vol.4, Issue 3 - Summer Year 2016]
  • Karimi.Afzal Immobilization of Glucose oxidase on Meso-porous Glass-ceramic with the Skeleton of CaTi4(PO¬4)6 [ Vol.1, Issue 4 - Autumn Year 2013]
  • Karimian.Majid Structural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique [ Vol.5, Issue 1 - Winter Year 2017]
  • karimkhani.fahad Effect of Titania Colloid Solution Concentration on Hydrophobicity of Well-Aligned TiO2 Nanorods Synthesized via Hydrothermal Method [ Vol.2, Issue 1 - Winter Year 2014]
  • Karimzadeh.Fathallah Effects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts [ Vol.4, Issue 1 - Winter Year 2016]
  • Karimzadeh.Fathollah The effect of mechanical activation on the kinetic and formation mechanism of a niobium aluminide based nanocomposite [ Vol.4, Issue 3 - Summer Year 2016]
  • Kasiri.Masoud GEP-based Modeling for Predicting Sponge Iron Metallization in Persian Direct Reduction (PERED) Method [ Vol.9, Issue 4 - Autumn Year 2021]
  • Kasiri.Masoud Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
  • Kavyani.Mahdi Improvement Impact Manufacturing Parameteres of Aluminum Foams [ Vol.6, Issue 4 - Autumn Year 2018]
  • Kazemi.Shahb On the fabrication and characterization of Al5083/Al2O3 surface nanocomposite via friction stir processing [ Vol.5, Issue 2 - Spring Year 2017]
  • Kazemzadeh.Asghar Kinetics analysis of electrophoretic deposition using small signal and large signal modeling, Case study: Nano-Mullite suspension [ Vol.4, Issue 4 - Autumn Year 2016]
  • Kazemzadeh.S. Mohammad Characterization of nanostructured SnO2 thin film coated by Ag nanoparticles [ Vol.2, Issue 2 - Spring Year 2014]
  • Kazemzadeh-Parsi.Mohammad Javad New Iteration based Algorithm for Shape Optimization of Internal and External Boundaries of the Initial Blank in the Deep Drawing Process [ Vol.8, Issue 3 - Summer Year 2020]
  • Kelishadi.Mohammad Reza A Kinetic Study of Vanadium Dissolution During Acetic Acid Leaching of Steel Making Converter Slag [ Vol.8, Issue 4 - Autumn Year 2020]
  • Keshavarz.Saeed Isothermal and cyclic oxidation behavior of AISI 430 ferritic stainless steel coated with titanium [ Vol.6, Issue 2 - Spring Year 2018]
  • Keshtiban.Peyman Optimization of ECMAP parameters in production of ultra-fine grained Al1050 strips using Grey relational analysis [ Vol.3, Issue 4 - Autumn Year 2015]
  • Keshtiban.Peyman Modeling and production of high strength Al strips by equal channel multi angular pressing method [ Vol.3, Issue 4 - Autumn Year 2015]
  • khademinia.shahin Bismuth Pyromangenate: Hydrothermal and Solid State Synthesis, Characterization and Optical Properties [ Vol.3, Issue 1 - Winter Year 2015]
  • khademinia.shahin Photocatalytic degradation of Malachite Green by Sr3MxAl2O6+δ ﴾M=None, Sm3+, Eu3+, Ho3+ and Yb3+) nanomaterial as an excellent and recyclable photocatalyst [ Vol.8, Issue 1 - Winter Year 2020]
  • Khaghani.Masoumeh Reinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber [ Vol.4, Issue 3 - Summer Year 2016]
  • Khaleghifar.Mohammad Hossein Investigation of mechanical properties and fracture surfaces of 5086 Al-based alloy processed by equal channel angular pressing in different routes [ Vol.5, Issue 4 - Autumn Year 2017]
  • Khalvan.Mohammad Mehdi Semiconducting properties of passive films formed on AISI 420 stainless steel in nitric acid solutions [ Vol.1, Issue 4 - Autumn Year 2013]
  • Khameneh Asl.Shahin Mechanical Alloying and Spark Plasma Sintering of Equiatomic AlCoCrFeMnNi High Entropy Alloy [ Vol.10, Issue 1 - Winter Year 2022]
  • Khandan.Amirsalar Fabrication of polycaprolactone and polylactic acid shapeless scaffolds via fused deposition modelling technology [ Vol.7, Issue 4 - Autumn Year 2019]
  • Khayatian.Ali Investigating structural, optical and photocatalytic properties of hydrothermally synthesized ZnO nanorod arrays with various aspect ratios [ Vol.3, Issue 4 - Autumn Year 2015]
  • Khoda Bande Dastjerdi.Ehsan CORROSION BEHAVIOR OF BIOACTIVATED TITANIUM DENTAL IMPLANT USING DIFFERENT CHEMICAL METHODS [ Vol.6, Issue 1 - Winter Year 2018]
  • khodaei.Milad Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties [ Vol.10, Issue 4 - Autumn Year 2022]
  • khodai.mohammad CORROSION BEHAVIOR OF BIOACTIVATED TITANIUM DENTAL IMPLANT USING DIFFERENT CHEMICAL METHODS [ Vol.6, Issue 1 - Winter Year 2018]
  • khodai.mohammad Hydroxyapatite Nano-Particles Extracted from Miscellaneous Bestial Resources: Study of Crystal Structure and Microstructure [ Vol.8, Issue 3 - Summer Year 2020]
  • khodai.mohammad Improving the Properties of the Porous Polylactic Acid Scaffold by Akermanite Nanoparticles for Bone Tissue Engineering [ Vol.8, Issue 2 - Spring Year 2020]
  • Khoeini.Mahdi Effect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites [ Vol.6, Issue 2 - Spring Year 2018]
  • khoran.Eisa Effect of CTAB surfactant on microstructure and oxidation behavior of Ni-TiO2 Composite coating [ Vol.6, Issue 4 - Autumn Year 2018]
  • Khorasani.Mohammad T. Preparation and Determination of the Characteristics of Hydrogel Membrane of Poly-Vinyl Alchol, Starch and Chitosan [ Vol.9, Issue 1 - Winter Year 2021]
  • Khorasani.Mohammad T. Plasma Influence of Surface Texture of Silicone Rubber for Biomedical Application in Scala Tympani [ Vol.9, Issue 2 - Spring Year 2021]
  • Kolahan.Farhad Using design of experiments approach and simulated annealing algorithm for modeling and Optimization of EDM process parameters [ Vol.6, Issue 3 - Summer Year 2018]
  • Kolahan.Farhad Simultaneously Modeling and Optimization of Heat Affected Zone and Tensile Strength in GTAW Process Using Simulated Annealing Algorithm [ Vol.9, Issue 2 - Spring Year 2021]
  • Koupaei.Narjes Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]
  • Kristiani.Anis Synthesis of the Nano structured Zinc Oxide Using the Soft template of Cylea barbata miers Extract and its Promising Property for Dye Adsorbent [ Vol.3, Issue 1 - Winter Year 2015]

L

  • Lakshmi Narasimman.Yogesh Failure Mode and Analysis of the Bonded/bolted Joints between a Hybrid Fibre Reinforced Polymer and Aluminium Alloy [ Vol.3, Issue 2 - Spring Year 2015]
  • Loghmani.Atena Passivity of AISI 316L stainless steel as a function of nitric concentration [ Vol.2, Issue 2 - Spring Year 2014]
  • Lotfi.Behnam Investigating the effect of tool dimension and rotational speed on microstructure of Al-B4C surface composite layer produced by friction stir processing (FSP) [ Vol.3, Issue 2 - Spring Year 2015]
  • Lotfi.Marzieh Effect of Sr substitution on structural, redox and catalytic properties of nano-particles La1-xSrxMn0.5Co0.5O3 (x = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5) as a catalyst for CO oxidation [ Vol.2, Issue 4 - Autumn Year 2014]

M

  • Madoliat.Reza Effect of different yield functions on computations of forming limit curves for aluminum alloy sheets [ Vol.6, Issue 3 - Summer Year 2018]
  • Mahdavi.Mohammad Investigation of the Factors Affecting on the Granulation of ZrB2 Nano-Particles Synthesized by Using Na Metal as Reductant [ Vol.8, Issue 2 - Spring Year 2020]
  • Mahdavinejad.Ramezanali Statistical Analysis and Optimization of Factors Affecting the Surface Roughness in UVaSPIF Process Using Response Surface Methodology [ Vol.3, Issue 1 - Winter Year 2015]
  • mahmoodi.masoud Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties [ Vol.10, Issue 4 - Autumn Year 2022]
  • Mahmoudian.Mostafa Comparing the capability of various models for predicting of the Bayer process parameters [ Vol.6, Issue 1 - Winter Year 2018]
  • Mahmoudsaleh.Eisa Effect of Nano-MgO Additive on Compressive Strength of Concrete Fabricated by Different Processing Methods [ Vol.10, Issue 1 - Winter Year 2022]
  • Majidi.Somayeh Effects of Active Material Particles Size Distribution on the Fabrication of TiNb2O7 Electrode Used in Lithium-Ion Batteries [ Vol.9, Issue 3 - Summer Year 2021]
  • Majidi.Somayeh Palladium-Cobalt on Reduced Graphene Oxide as an Electro-catalyst for Ethylene Glycol Oxidation in Alkaline Medium: Synthesis and Electrochemical Performance [ Vol.9, Issue 3 - Summer Year 2021]
  • Malekzadeh.Azim Effect of Sr substitution on structural, redox and catalytic properties of nano-particles La1-xSrxMn0.5Co0.5O3 (x = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5) as a catalyst for CO oxidation [ Vol.2, Issue 4 - Autumn Year 2014]
  • manouchehrian.mehdi Effect of N2 partial pressure on the structural and mechanical properties of TaN films [ Vol.4, Issue 4 - Autumn Year 2016]
  • Mansori.hojatallah Investigation of Microstructure weld zone of Hastelloy X Pulsed Nd-YAG laser welds [ Vol.1, Issue 4 - Autumn Year 2013]
  • mansouri.Hadi Microstructure evolution and mechanical properties of Mo40/C93200 bimetal processed by compound casting process [ Vol.6, Issue 1 - Winter Year 2018]
  • Mansouri.Mehdi Crystallization Kinetics Study in Al87Ni10La3 Amorphous Alloy [ Vol.6, Issue 3 - Summer Year 2018]
  • Mansouri.Mehdi Dissimilar DP780/DP980 Resistance Spot Welded joints: Microstructure, Mechanical Properties and Critical Diameter [ Vol.9, Issue 1 - Winter Year 2021]
  • Maraki.Mohamaad reza Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties [ Vol.10, Issue 4 - Autumn Year 2022]
  • mardi.h Sintering of Glass - Steel Slag-SiC Composite as a Foam [ Vol.8, Issue 3 - Summer Year 2020]
  • Masoumi.A. Numerical investigation of strain distribution during cyclic expansion extrusion (CEE) [ Vol.3, Issue 2 - Spring Year 2015]
  • Mekhail.Sara Shape Selective Pillared Clay Catalysts for P-Xylene Production [ Vol.3, Issue 3 - Summer Year 2015]
  • Meraji.Noshin Fine Grain Formation in as Cold Worked SP700 Titanium Alloy and Its Effect on Mechanical and Superplastic Properties [ Vol.11, Issue 2 - Spring Year 1402]
  • Meratian.A. Investigation of mechanical properties and fracture surfaces of 5086 Al-based alloy processed by equal channel angular pressing in different routes [ Vol.5, Issue 4 - Autumn Year 2017]
  • Merkani.Mohammad Soroush Thermo-Mechanical Analysis of Wire Drawing of Copper with PCD die: FEM Study [ Vol.10, Issue 3 - Summer Year 2022]
  • Meshkabadi.Ramin Fabrication of Al7075-MWCNT Composite Powder by Recycling Aluminum Alloy Chips Via High Energy Milling and Alloying [ Vol.9, Issue 3 - Summer Year 2021]
  • Mir Najd Gerami.Mir Javad Simulation of Heat Transfer and Recrystallization in Aluminum Alloy AA 6070 by TIG Welding Method [ Vol.5, Issue 4 - Autumn Year 2017]
  • Mirdamadi.Hamid Reza Damage detection and structural health monitoring of ST-37 plate using smart materials and signal processing by artificial neural networks [ Vol.5, Issue 3 - Summer Year 2017]
  • Mirdamadi.Shamsodin Fabrication and characterization of the Ti-6Al-4V/Mg scaffold [ Vol.3, Issue 2 - Spring Year 2015]
  • Mirfazli.Seyedeh Sara Development and Evaluation of Nanomagnetic Carrier for the Controlled Loading and Release of Celecoxib [ Vol.10, Issue 1 - Winter Year 2022]
  • Mirhabibi.Alireza Electrochemical properties of iron oxide nanoparticles as an anode for Li-ion batteries [ Vol.3, Issue 4 - Autumn Year 2015]
  • Mirhabibi.Alireza The effects of different molten salt composition on morphology and purity of ZrB2 powder obtained via direct molten salt reaction method [ Vol.3, Issue 3 - Summer Year 2015]
  • Mirhosseini.Seyed Hossein Characterization and optimization of using calendula offlcinalis extract in fabrication of polycaprolactone-gelatin electrospun nanofibers for wound dressing applications [ Vol.6, Issue 2 - Spring Year 2018]
  • mirmohammadi.mehrosadat A Biosensor for the Detection of Type b3a2 Related to Chronic Myelogenous Leukemia by Using Locked Nucleic Acid, Molecular Switching, Magnetic Nanoparticles, and Enzymatic Signal Amplification [ Vol.10, Issue 4 - Autumn Year 2022]
  • Mirsalehi.Seyed Fabrication and characterization of the Ti-6Al-4V/Mg scaffold [ Vol.3, Issue 2 - Spring Year 2015]
  • Mirzaaghaei.Mahdi The tribological properties of Cu-Ni3Al-MoS2 composite coating deposited by magnetron sputtering [ Vol.4, Issue 4 - Autumn Year 2016]
  • Mirzaaghaei.Mahdi Fabricating the Tribological Properties and Investigating of Ni3Al-MoS2 Composite Coating [ Vol.9, Issue 1 - Winter Year 2021]
  • Mirzadeh Soltanpour.Hamed Utilization of Microalloying with Rare Earth Elements and Hot Extrusion for Remarkable Grain Refinement and Enhancement of Mechanical Properties of as-Cast Magnesium Alloy [ Vol.8, Issue 4 - Autumn Year 2020]
  • mirzadeh.hamid Plasma Influence of Surface Texture of Silicone Rubber for Biomedical Application in Scala Tympani [ Vol.9, Issue 2 - Spring Year 2021]
  • Mirzaee.Mahdi Hydrothermal Assisted Sol-Gel Process on Binary Mixtures of Aluminum and Titanium Alkoxides: A Novel Route for the Fabrication of Single Phase Tialite [ Vol.5, Issue 3 - Summer Year 2017]
  • Mirzaee.Mahdi Schiff base functionalized Fe3O4@Boehmite Core-Shell Nano-Particles to Support MoO2(acac)2 for Catalytic Epoxidation of Alkenes [ Vol.7, Issue 1 - Winter Year 2019]
  • Mirzaei.Sima Effect of Heat Treatment Time on the Characteristics of Coating Formed on Nanocrystalline Finemet Foils [ Vol.4, Issue 1 - Winter Year 2016]
  • moazeni.maryam Modeling and optimization of precipitation hardening heat treatment factors of Al2024 alloy using a two-level full factorial design [ Vol.3, Issue 2 - Spring Year 2015]
  • Moeeni.Shahram Nonlinear Optimization of Hot Metal Profit in Blast Furnace Based on the Decrease of Coke Consumption Rate Case Study: Esfahan Steel Company [ Vol.7, Issue 3 - Summer Year 2019]
  • Mofid.Mohammad Ammar Effect of silver interlayer on transient liquid phase (TLP) bonding of Al2024 to Ti-6Al-4V joints [ Vol.8, Issue 1 - Winter Year 2020]
  • moghimi nejad.fereshteh An investigation on the adsorption behavior of Sb (III) on a cationic ion exchange resin in Fixed-bed column: experimental design and breakthrough curves modeling [ Vol.8, Issue 1 - Winter Year 2020]
  • mohammad jafarpour.maryam Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Duplex Stainless Steel [ Vol.2, Issue 4 - Autumn Year 2014]
  • mohammad shafiee.mohammad reza A Biosensor for the Detection of Type b3a2 Related to Chronic Myelogenous Leukemia by Using Locked Nucleic Acid, Molecular Switching, Magnetic Nanoparticles, and Enzymatic Signal Amplification [ Vol.10, Issue 4 - Autumn Year 2022]
  • Mohammad Shafiee.Mohammad Reza Magnetic and Structural Characteristics of Fe2O3 Nanostructure Synthesized in the Presence of Sour Cherry Juice [ Vol.4, Issue 3 - Summer Year 2016]
  • Mohammadi majd.Hasan Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings [ Vol.1, Issue 4 - Autumn Year 2013]
  • Mohammadi Ziarani.Ghodsi Inhibitive Assessment of N-(8-bromo-3H-phenoxazin-3-ylidene)-N,N’-Dimethylaminium, as a Novel Corrosion Inhibitor for Mild Steel in 1.0 M HCl [ Vol.2, Issue 3 - Summer Year 2014]
  • Mohammadi.Hossein In vitro behavior of silk fibroin-coated calcium magnesium silicate scaffolds [ Vol.4, Issue 1 - Winter Year 2016]
  • Mohammadi.Iman Nanoporous anodized aluminum thickness optimization through pulse current mode [ Vol.3, Issue 4 - Autumn Year 2015]
  • Mohammadi.Mehrdad New Iteration based Algorithm for Shape Optimization of Internal and External Boundaries of the Initial Blank in the Deep Drawing Process [ Vol.8, Issue 3 - Summer Year 2020]
  • Mohassel.Abbas Synthesis of zinc aluminate (ZnAl2O4) by mechanochemical processing with different molar ratios of ZnS:Al [ Vol.8, Issue 1 - Winter Year 2020]
  • Mohsenifar.Farhad Effect of bath pH on microstructure and corrosion behavior of manganese phosphate coating on SCM420H steel [ Vol.7, Issue 2 - Spring Year 2019]
  • mohsin.ali The Simulation on the Phase Formation of Bi-Ba-Ca-Cu-O high Temperature Superconductor [ Vol.9, Issue 4 - Autumn Year 2021]
  • Molaei.Arman Study on compressive and compatibility properties of titanium functionally graded scaffolds (FGSs) as bone replacements [ Vol.6, Issue 3 - Summer Year 2018]
  • Monir Vaghefi.Sayed Mahmoud Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]
  • Monirvaghefi.S.M. Fabrication and Characterization of Nanostructure Functionally Graded Ni-P Electroless Coating [ Vol.4, Issue 1 - Winter Year 2016]
  • Monochehri.Iraj Electrophoretic deposition technique for coating nano TiO2 on SS316L alloy. [ Vol.6, Issue 4 - Autumn Year 2018]
  • monshi.ahmad Effects of Replacing Fluorine with Sodium and Titanium Oxides on Continuous Casting of Steel Mold Powders Lubrication [ Vol.3, Issue 1 - Winter Year 2015]
  • monshi.ahmad Reinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber [ Vol.4, Issue 3 - Summer Year 2016]
  • monshi.ahmad Effect of TiO2 nanoparticles on the bond strength of CP Ti sheet by cold Rolling method [ Vol.5, Issue 1 - Winter Year 2017]
  • monshi.ahmad Delamination Detection in a Laminated Carbon Composite Plate Using Lamb Wave by Lead-Free Piezoceramic Transducers [ Vol.9, Issue 3 - Summer Year 2021]
  • monshi.ahmad Chemical Reaction, Substructure, and Mechanical Behavior of Spinel MgAl2O4, Mullite, and Forsterite Nanocrystallines by Applying Mechanochemical Process and Subsequent Three-Step Heat Treatment [ Vol.10, Issue 3 - Summer Year 2022]
  • Moosavi.Farzaneh Effect of different yield functions on computations of forming limit curves for aluminum alloy sheets [ Vol.6, Issue 3 - Summer Year 2018]
  • Moradgholi.Javad Effect of TiO2 nanoparticles on the bond strength of CP Ti sheet by cold Rolling method [ Vol.5, Issue 1 - Winter Year 2017]
  • Moradi.Mahmoud Statistical Analysis and Optimization of Factors Affecting the Surface Roughness in UVaSPIF Process Using Response Surface Methodology [ Vol.3, Issue 1 - Winter Year 2015]
  • Moradian.Rostam Electrophoretic deposition technique for coating nano TiO2 on SS316L alloy. [ Vol.6, Issue 4 - Autumn Year 2018]
  • moradpor.ehsan Tribological behavior of sputter-deposited MoSX/Ni coatings [ Vol.6, Issue 2 - Spring Year 2018]
  • Morakabati.Maryam The Effect of Annealing Temperature on the High Temperature Deformation Behavior of Ti-5Al-4.2V-0.8 Mo-2Fe α/β Titanium Alloy [ Vol.10, Issue 3 - Summer Year 2022]
  • Morakabati.Maryam Investigating the Effects of Boron and Zirconium on the High-Temperature Fatigue Behavior of Nimonic 105 Super Alloy [ Vol.10, Issue 3 - Summer Year 2022]
  • Morakabati.Maryam Evaluation of Flow Behavior of Novel Titanium Ti-3873 Alloy Via Compressive Deformation in Two Phase α/β and Single Phase β Regions [ Vol.11, Issue 2 - Spring Year 1402]
  • Morakabati.Maryam Fine Grain Formation in as Cold Worked SP700 Titanium Alloy and Its Effect on Mechanical and Superplastic Properties [ Vol.11, Issue 2 - Spring Year 1402]
  • Mosayebidorcheh.Sobhan Solidification and thermal performance analysis of the low carbon steel during the continuous casting process [ Vol.5, Issue 3 - Summer Year 2017]
  • Moshtaghian.Jamal Preparation and Determination of the Characteristics of Hydrogel Membrane of Poly-Vinyl Alchol, Starch and Chitosan [ Vol.9, Issue 1 - Winter Year 2021]
  • Mostaan.Hossein Dissimilar resistance spot welding of AISI 1075 eutectoid steel to AISI 201 stainless steel [ Vol.5, Issue 1 - Winter Year 2017]
  • Mostaan.Hossein The effect of mechanical activation on the kinetic and formation mechanism of a niobium aluminide based nanocomposite [ Vol.4, Issue 3 - Summer Year 2016]
  • Mostaan.Hossein Experimental Investigation on the dissimilar laser weld joints between Inconel 625 Superalloy and AISI 430 Ferritic Stainless Steel [ Vol.8, Issue 1 - Winter Year 2020]
  • Motavalli.Ali Effect of Milling Time on Hydrogen Desorption Properties of Nanocrystalline MgH2 [ Vol.2, Issue 3 - Summer Year 2014]
  • Mountassir.lahcen Elastic characterization of porous bone by ultrasonic method through Lamb waves [ Vol.5, Issue 2 - Spring Year 2017]
  • Mousavi.Seyed Elias Investigation of mechanical properties and fracture surfaces of 5086 Al-based alloy processed by equal channel angular pressing in different routes [ Vol.5, Issue 4 - Autumn Year 2017]
  • Mousavi.Seyyed Ali Recycling Evaluation of Mill Scale in Electric Arc Furnace [ Vol.2, Issue 3 - Summer Year 2014]

N

  • N O.Gopal Thermal, optical and dielectric studies of VO2+ doped Poly(vinyl chloride)(PVC) films [ Vol.5, Issue 4 - Autumn Year 2017]
  • N.Arunkumar Failure Mode and Analysis of the Bonded/bolted Joints between a Hybrid Fibre Reinforced Polymer and Aluminium Alloy [ Vol.3, Issue 2 - Spring Year 2015]
  • N.SANTHOSH Fatigue Characterization of High Performance Hybrid Aluminium AA 5083/SiCp/Fly Ash Metal Matrix Composites [ Vol.7, Issue 2 - Spring Year 2019]
  • Nadaroglu.Hayrunnisa Green Synthesis of Nanoceria (CeO2) and Evaluation of Enzyme like Characteristics [ Vol.6, Issue 3 - Summer Year 2018]
  • Naderi.Malek Hydrochemically separation of gold from Copper Anode Slime by means of Thiourea solution [ Vol.5, Issue 1 - Winter Year 2017]
  • Naderi.Nima Band-Gap Tuning Of Electron Beam Evaporated Cds Thin Films [ Vol.4, Issue 4 - Autumn Year 2016]
  • Nadernezhad.Ali In vitro behavior of silk fibroin-coated calcium magnesium silicate scaffolds [ Vol.4, Issue 1 - Winter Year 2016]
  • Nadernezhad.Ali Poly (lactic-co-glycolic)/nanostructured merwinite porous composites for bone tissue engineering: II. structural and in vitro characterization [ Vol.2, Issue 4 - Autumn Year 2014]
  • naeimi.farid Effect of Bonding Time on Microstructure and Mechanical Properties of Transient Liquid Phase Bonding Between WC-Co/St52 [ Vol.11, Issue 1 - Winter Year 2023]
  • Najafi.Farhood Poly (lactic-co-glycolic)/nanostructured merwinite porous composites for bone tissue engineering: II. structural and in vitro characterization [ Vol.2, Issue 4 - Autumn Year 2014]
  • Najafi.Mehrdad Investigating structural, optical and photocatalytic properties of hydrothermally synthesized ZnO nanorod arrays with various aspect ratios [ Vol.3, Issue 4 - Autumn Year 2015]
  • najafzadegan.farrokh Investigation of Microstructure weld zone of Hastelloy X Pulsed Nd-YAG laser welds [ Vol.1, Issue 4 - Autumn Year 2013]
  • Narimani.Mohammad Investigating the effect of tool dimension and rotational speed on microstructure of Al-B4C surface composite layer produced by friction stir processing (FSP) [ Vol.3, Issue 2 - Spring Year 2015]
  • Naseri.Majid Effect of Twist Extrusion Process on the Mechanical Properties and Microstructure Evolution of 70-30 Brass Alloy [ Vol.6, Issue 4 - Autumn Year 2018]
  • Nasiri-Tabrizi.Bahman Effect of heating rate on morphological features of oxidized electrolessnickel–boron coatings [ Vol.3, Issue 3 - Summer Year 2015]
  • Nasr-Azadani.Mehdi Nonlinear Optimization of Hot Metal Profit in Blast Furnace Based on the Decrease of Coke Consumption Rate Case Study: Esfahan Steel Company [ Vol.7, Issue 3 - Summer Year 2019]
  • Nasre Isfahani.Mojtaba Thymus Carmanicus Mediated Synthesis of Zero Valent Iron Nanoparticles at Alkaline pH and Studies on Their Antibacterial Activity [ Vol.11, Issue 1 - Winter Year 2023]
  • Nazari Siahpoush.Ashkan Mechanical Behavior of the Copper Matrix Composite Reinforced by Steel Particles [ Vol.10, Issue 2 - Spring Year 2022]
  • Nazemi.Hamid CORROSION BEHAVIOR OF BIOACTIVATED TITANIUM DENTAL IMPLANT USING DIFFERENT CHEMICAL METHODS [ Vol.6, Issue 1 - Winter Year 2018]
  • Neghabi.Mina Synthesis and Characterization of Linear/Nonlinear Optical Properties of GO, RGO, RGO-ZNO, and RGO-ZNO-Fe2O4 [ Vol.10, Issue 4 - Autumn Year 2022]
  • Neghabi.Mina Linear and Nonlinear Optical Properties in CdSe/ZnS/CdSe and ZnS/CdSe/ZnS Spherical Core-Shell-Shell Quantum Dots [ Vol.11, Issue 1 - Winter Year 2023]
  • Nemati.Ali Synthesis, characterization and application of graphene oxide, graphene oxide quantum dots and graphene quantum dots in photoelectrochemical sensors [ Vol.7, Issue 2 - Spring Year 2019]
  • Nemati.Ali Effect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites [ Vol.6, Issue 2 - Spring Year 2018]
  • Nemati.Ali Effect of co-doping on hydrophilic and photoelectric properties of co-doped titania nanoparticles as a composition of electrode modifier [ Vol.7, Issue 3 - Summer Year 2019]
  • Nematollahi.Mohammad Prediction of Corrosion Rate for Carbon Steel in Soil Environment by Artificial Neural Network and Genetic Algorithm [ Vol.7, Issue 4 - Autumn Year 2019]
  • Nesaraj.A Samson Chemical synthesis and characterization of Zn-doped cadmium oxide based nanoparticles: As nanofluids for thermophysical applications [ Vol.3, Issue 2 - Spring Year 2015]
  • Neshati.Jaber Inhibitive Assessment of N-(8-bromo-3H-phenoxazin-3-ylidene)-N,N’-Dimethylaminium, as a Novel Corrosion Inhibitor for Mild Steel in 1.0 M HCl [ Vol.2, Issue 3 - Summer Year 2014]
  • Nkosi.Sifiso Extraction of Hemicellulose and Lignin from Sugarcane Bagasse for Biopolymer Films: Green Process [ Vol.6, Issue 3 - Summer Year 2018]
  • noormohammadi.mohammad Fabrication of anodic aluminium oxide template and the generation of magnetic Co nanowires within it [ Vol.7, Issue 4 - Autumn Year 2019]
  • Noroozi.Amir Increasing the hydrogen storage capacity of single-walled carbon nanotube (SWNT) through facile impregnation by TiO2, ZrO2 and ZnO nanocatalysts [ Vol.2, Issue 2 - Spring Year 2014]
  • norouzi.vahid Mechanical Behavior of the Copper Matrix Composite Reinforced by Steel Particles [ Vol.10, Issue 2 - Spring Year 2022]
  • Nounah.Hassan Elastic characterization of porous bone by ultrasonic method through Lamb waves [ Vol.5, Issue 2 - Spring Year 2017]
  • Nourbakhsh.Amir Abbas Inclusion Removal Mechanisms of Al-Killed 304 Low Carbon Stainless Steel Melt Using Hercynite Coated Al2O3-C Ceramic Foam Filters [ Vol.9, Issue 2 - Spring Year 2021]
  • Nouri.Mohsen The Relationship between Structural and Optical Properties of GeO2-PbO Glasses [ Vol.5, Issue 2 - Spring Year 2017]
  • Nourivatan.Farid The thermal conductivity investigation of nanofluids containing decorated Ag nanorods with Cu nanoparticles using statistical method [ Vol.5, Issue 2 - Spring Year 2017]
  • nourouzi.salman Improving the surface wear resistance of aluminum by electrical discharge process [ Vol.6, Issue 2 - Spring Year 2018]
  • Nourouzi.Salman Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings [ Vol.1, Issue 4 - Autumn Year 2013]

O

  • olaniran.oladayo Electrochemical and Tribological Behaviour of Oxide Dispersion Strengthened Duplex Stainless Steel in Mine Water Environment [ Vol.5, Issue 1 - Winter Year 2017]
  • Olya.Mohammad Ebrahim Amelioration of the acid blue oxidation process by as-synthesized ZnO nanoparticles: Optimization of the dye and photocatalyst concentration together with the pH of the solution [ Vol.6, Issue 2 - Spring Year 2018]
  • Omidi.Mahdi Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]
  • Omidi.Mahdi Application of mesoporous silica containing benzotriazole in the epoxy coating applied to plain carbon steel and study of its corrosion behavior [ Vol.6, Issue 3 - Summer Year 2018]
  • Omidi.Mahdi Addition of Mo in the Zn based alloy coating in the citrate solution and investigation of its corrosion behavior [ Vol.7, Issue 1 - Winter Year 2019]
  • Omidi.Mahdi Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
  • Omidi.Mahdi Effect of Bonding Time on Microstructure and Mechanical Properties of Transient Liquid Phase Bonding Between WC-Co/St52 [ Vol.11, Issue 1 - Winter Year 2023]
  • Omidi.Meisam Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]
  • Onem.Hicran Green Synthesis of Nanoceria (CeO2) and Evaluation of Enzyme like Characteristics [ Vol.6, Issue 3 - Summer Year 2018]
  • Ong.C.K. Thermal Stability and Dynamic Magnetic Properties of NiO/Fe Multilayered Thin Films Prepared by Oblique-Angle Sputtering Technique [ Vol.10, Issue 2 - Spring Year 2022]
  • Oruru.Bosco Effect of Quartz Particle Size on Sintering Behavior and Flexural Strength of Porcelain Tiles Made from Raw Materials in Uganda [ Vol.7, Issue 1 - Winter Year 2019]
  • oveisi.hamid Nanoporous Carbon Spheres Derived from the Leather Leaf as Electrode Materials for Supercapacitors [ Vol.9, Issue 1 - Winter Year 2021]

P

  • panahi moghaddam.Afagh The Effect of Magnesium on the Microstructure and Stress Rupture Properties of Hastelloy X Supealloy [ Vol.7, Issue 3 - Summer Year 2019]
  • Parikh.Hiral Mechanical Characterization of Hemp Cotton Hybrid Composites: Effect of Surface Treatment [ Vol.7, Issue 2 - Spring Year 2019]
  • Pariz.Naser Influence of Converter and inverter on dynamic behavior of the GMAW process [ Vol.2, Issue 4 - Autumn Year 2014]
  • Parto.Puya Continuous Grain Refinement of Pure Aluminum During Cyclic Contraction/Expansion Extrusion (CCEE) Analyses by Micromechanical-Based FE and Experimental Methods [ Vol.11, Issue 1 - Winter Year 2023]
  • Parvizian.Parnia The Effect of Annealing Temperature on the High Temperature Deformation Behavior of Ti-5Al-4.2V-0.8 Mo-2Fe α/β Titanium Alloy [ Vol.10, Issue 3 - Summer Year 2022]
  • Pasoudeh.Behzad Analytical and Numerical Evaluation of Wire Flat Rolling Process Based on the Slab Method and DEFORM-3D [ Vol.8, Issue 4 - Autumn Year 2020]
  • Patel.Shrey Mechanical Characterization of Hemp Cotton Hybrid Composites: Effect of Surface Treatment [ Vol.7, Issue 2 - Spring Year 2019]
  • Pourabdollah.Javad Creep and Stress Redistribution Analysis of Thick-Wall FGM Spheres Subjected to Mechanical Load and Heat Flux – An Analytical Approach [ Vol.8, Issue 3 - Summer Year 2020]
  • Pourjafar.Ali The Improvement of Mechanical Properties of the Incoloy 825 Weld Metal by Applying Electromagnetic Vibration [ Vol.9, Issue 2 - Spring Year 2021]
  • pournajaf.reza Polyacrylamide synthesis of nanostructured copper aluminate for photocatalytic application [ Vol.5, Issue 4 - Autumn Year 2017]
  • Pouyafar.Vahid Fabrication of Al7075-MWCNT Composite Powder by Recycling Aluminum Alloy Chips Via High Energy Milling and Alloying [ Vol.9, Issue 3 - Summer Year 2021]

R

  • Ra'ayatpour.M. Utilization of Microalloying with Rare Earth Elements and Hot Extrusion for Remarkable Grain Refinement and Enhancement of Mechanical Properties of as-Cast Magnesium Alloy [ Vol.8, Issue 4 - Autumn Year 2020]
  • Rabanian.Abdolali Linear and Nonlinear Optical Properties in CdSe/ZnS/CdSe and ZnS/CdSe/ZnS Spherical Core-Shell-Shell Quantum Dots [ Vol.11, Issue 1 - Winter Year 2023]
  • Rabiee.Seyed Mahmood Synthesis and thermal stability of nanocrystalline Mg-6Al-1Zn-1Si alloy prepared via mechanical alloying [ Vol.3, Issue 1 - Winter Year 2015]
  • radwan.dalia Shape Selective Pillared Clay Catalysts for P-Xylene Production [ Vol.3, Issue 3 - Summer Year 2015]
  • Rafiaei.Seyed Mehdi Hydroxyapatite Nano-Particles Extracted from Miscellaneous Bestial Resources: Study of Crystal Structure and Microstructure [ Vol.8, Issue 3 - Summer Year 2020]
  • Rafiee-Pour.Hossain-Ali Fabrication of Silver Oxide and Nickel Oxide Nanoparticles by Green Synthesis Method Using Malva Sylvestris Plant Extract [ Vol.11, Issue 1 - Winter Year 2023]
  • Rafiei.Mahdi The effect of mechanical activation on the kinetic and formation mechanism of a niobium aluminide based nanocomposite [ Vol.4, Issue 3 - Summer Year 2016]
  • Rafiei.Mahdi Experimental Investigation on the dissimilar laser weld joints between Inconel 625 Superalloy and AISI 430 Ferritic Stainless Steel [ Vol.8, Issue 1 - Winter Year 2020]
  • Rafiei.Mahdi Delamination Detection in a Laminated Carbon Composite Plate Using Lamb Wave by Lead-Free Piezoceramic Transducers [ Vol.9, Issue 3 - Summer Year 2021]
  • Rafiei.Mahdi Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]
  • Rafiei.Mahdi Effect of Bonding Time on Microstructure and Mechanical Properties of Transient Liquid Phase Bonding Between WC-Co/St52 [ Vol.11, Issue 1 - Winter Year 2023]
  • Rafiei.Mehdi The study of the elements migration from the matrix phases to the grain boundary effects on the creep rupture of G-NiCrTi28W alloy at elevated temperature [ Vol.7, Issue 1 - Winter Year 2019]
  • Rafienia.Mohammad Evolution of Biological Properties of Bioactive Diopside and Wollastonite for Bone Tissue Engineering [ Vol.10, Issue 1 - Winter Year 2022]
  • Rahimipour.mohammad Reza Determination of solution temperature in an ex-service Ni-based turbine blade [ Vol.5, Issue 3 - Summer Year 2017]
  • Rahimipour.mohammad Reza Effect of morphology and nonbounded interface on dielectric properties of plasma sprayed BaTiO3 Coating [ Vol.2, Issue 4 - Autumn Year 2014]
  • Rajabi nejad.sobhan Influence of Withdrawal Rate on As-Cast Microstructure and Stress-Rupture Life of Directionally Solidified Rene80 Superalloy [ Vol.10, Issue 2 - Spring Year 2022]
  • rajabi.mohammad Synthesis and thermal stability of nanocrystalline Mg-6Al-1Zn-1Si alloy prepared via mechanical alloying [ Vol.3, Issue 1 - Winter Year 2015]
  • rajabi.mohammad Effect of Milling Time on Hydrogen Desorption Properties of Nanocrystalline MgH2 [ Vol.2, Issue 3 - Summer Year 2014]
  • Rangbarnodeh.Islam Simulation of Heat Transfer and Recrystallization in Aluminum Alloy AA 6070 by TIG Welding Method [ Vol.5, Issue 4 - Autumn Year 2017]
  • Ranjbar.Reza Hydrochemically separation of gold from Copper Anode Slime by means of Thiourea solution [ Vol.5, Issue 1 - Winter Year 2017]
  • Ranjbarzadeh.Ramin Preparing and Investigation a New Nanofluid for Employing in Machining Process: Synthesis and Characterization of Graphene Oxide Nanoparticles [ Vol.5, Issue 4 - Autumn Year 2017]
  • Raoufi.Mahdi Determination of Residual Stress of PACVD Nanostructure TiN Coatings by GIXRD Method [ Vol.6, Issue 3 - Summer Year 2018]
  • Rassizadehghani.Jafar Utilization of Microalloying with Rare Earth Elements and Hot Extrusion for Remarkable Grain Refinement and Enhancement of Mechanical Properties of as-Cast Magnesium Alloy [ Vol.8, Issue 4 - Autumn Year 2020]
  • Reyes.Luis Characterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates [ Vol.6, Issue 1 - Winter Year 2018]
  • Rezaee.Amir Study the effect of the friction stir process on the microstructure and mechanical behavior of the AZ31 as-cast alloy joint [ Vol.7, Issue 2 - Spring Year 2019]
  • Rezaei Ashtiani.hamidreza Prediction of forging force and barreling behavior in isothermal hot forging of AlCuMgPb aluminum alloy using artificial neural network [ Vol.6, Issue 1 - Winter Year 2018]
  • Rezaei-Baravati.Abouzar Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
  • Rezvani.Mohammad Immobilization of Glucose oxidase on Meso-porous Glass-ceramic with the Skeleton of CaTi4(PO¬4)6 [ Vol.1, Issue 4 - Autumn Year 2013]
  • Riazat.M. Size effect in equal channel angular pressing (ECAP) process [ Vol.3, Issue 3 - Summer Year 2015]
  • Rohani Mojarad.Saeed Friction Stir Welding of Al 2024 with Al 7075 Alloys and evaluate its structural and mechanical properties [ Vol.6, Issue 4 - Autumn Year 2018]
  • Rohania.Nadia FSP pass number and cooling effects on the microstructure and properties of AZ31 [ Vol.6, Issue 2 - Spring Year 2018]
  • rokhsat.eliza Investigating structural, optical and photocatalytic properties of hydrothermally synthesized ZnO nanorod arrays with various aspect ratios [ Vol.3, Issue 4 - Autumn Year 2015]
  • Rostami.Mohammad Prediction of Corrosion Rate for Carbon Steel in Soil Environment by Artificial Neural Network and Genetic Algorithm [ Vol.7, Issue 4 - Autumn Year 2019]
  • Rostami.Mohammad Reza Application of mesoporous silica containing benzotriazole in the epoxy coating applied to plain carbon steel and study of its corrosion behavior [ Vol.6, Issue 3 - Summer Year 2018]
  • Rostami.Mohammad Reza Addition of Mo in the Zn based alloy coating in the citrate solution and investigation of its corrosion behavior [ Vol.7, Issue 1 - Winter Year 2019]
  • Rouhaghdam.Alireza The Study of High Temperature Oxidation behavior of Different Microstructures of HVOF Thermally Sprayed Coatings [ Vol.2, Issue 2 - Spring Year 2014]

S

  • saad.mohamed Processing of aluminum flake powder via high energy ball milling under different conditions reaching to aluminum nanoparticles [ Vol.7, Issue 2 - Spring Year 2019]
  • Saadi.Foad Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings [ Vol.1, Issue 4 - Autumn Year 2013]
  • sabaghian.marzie Alfa- Bismuth(III)oxide catalyzed Biginelli reactions using experimentally designed optimized condition [ Vol.3, Issue 4 - Autumn Year 2015]
  • Sabea Amnas.Hussein Electrophoretic deposition technique for coating nano TiO2 on SS316L alloy. [ Vol.6, Issue 4 - Autumn Year 2018]
  • Saberifar.Saeid Recycling Evaluation of Mill Scale in Electric Arc Furnace [ Vol.2, Issue 3 - Summer Year 2014]
  • Sadeghi Gogheri.Mojtaba GEP-based Modeling for Predicting Sponge Iron Metallization in Persian Direct Reduction (PERED) Method [ Vol.9, Issue 4 - Autumn Year 2021]
  • Sadeghi.Babak One-pot synthesis of Ag/Fe3O4 nanocomposite: Preparation, characterization and efficient catalyst [ Vol.5, Issue 3 - Summer Year 2017]
  • Sadeghi.Babak Development and Evaluation of Nanomagnetic Carrier for the Controlled Loading and Release of Celecoxib [ Vol.10, Issue 1 - Winter Year 2022]
  • Sadeghian.Zohreh Investigating the effect of tool dimension and rotational speed on microstructure of Al-B4C surface composite layer produced by friction stir processing (FSP) [ Vol.3, Issue 2 - Spring Year 2015]
  • Sadeghpour.Parisa Synthesis of Nanostructured MnNiAPSO-34 Catalyst: Catalytic Properties and Performance [ Vol.2, Issue 2 - Spring Year 2014]
  • Sadrkhah.M. Evaluation of Microstructure and Tensile Behavior of Fine-Grained AZ61 Alloy Tube Processed by Severe Plastic Deformation [ Vol.7, Issue 3 - Summer Year 2019]
  • Saebnoori.Ehsan The study of the elements migration from the matrix phases to the grain boundary effects on the creep rupture of G-NiCrTi28W alloy at elevated temperature [ Vol.7, Issue 1 - Winter Year 2019]
  • Saebnoori.Ehsan An optimization and characterization study on sodium ferrate production by electrochemical method [ Vol.7, Issue 4 - Autumn Year 2019]
  • Saebnoori.Ehsan Prediction of Corrosion Rate for Carbon Steel in Soil Environment by Artificial Neural Network and Genetic Algorithm [ Vol.7, Issue 4 - Autumn Year 2019]
  • Saebnoori.Ehsan Polyethylene Glycol Coated NiFe2O4 Nanoparticles Produced by Solution Plasma Method for Biomedical Applications [ Vol.8, Issue 4 - Autumn Year 2020]
  • Saeedi.Behnaz The Study of High Temperature Oxidation behavior of Different Microstructures of HVOF Thermally Sprayed Coatings [ Vol.2, Issue 2 - Spring Year 2014]
  • saeri.Moahammad Evaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method. [ Vol.4, Issue 2 - Spring Year 2016]
  • Safari.Mehdi Dissimilar resistance spot welding of AISI 1075 eutectoid steel to AISI 201 stainless steel [ Vol.5, Issue 1 - Winter Year 2017]
  • Saffar.Ali Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]
  • saghirzadeh darki.shakiba Novel BCP-Bioactive Glass-Akermanite/PCL Composite Scaffold: Physical and Mechanical Behavior, and in Vitro Bioactivity [ Vol.8, Issue 3 - Summer Year 2020]
  • Saidi.Ali The Effect of sintering temperature on microstructure and hardness of milled WC- 20 wt.% equiatomic (Fe,Co) cemented carbides [ Vol.3, Issue 1 - Winter Year 2015]
  • Saidi.Ali Production and Characterization of Nano Crystalline Fe85Si10Ni5 Soft Magnetic Alloys by Mechanical Alloying [ Vol.2, Issue 4 - Autumn Year 2014]
  • Saidi.Ali Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling [ Vol.2, Issue 3 - Summer Year 2014]
  • Saidi.Ali Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying [ Vol.2, Issue 3 - Summer Year 2014]
  • Saidi.Ali Effects of Replacing Fluorine with Sodium and Titanium Oxides on Continuous Casting of Steel Mold Powders Lubrication [ Vol.3, Issue 1 - Winter Year 2015]
  • Saidi.Ali Silicothermic production and characterization of FeSiNi/SiO2 Magnetic nanocompsite via mechanical alloying [ Vol.2, Issue 4 - Autumn Year 2014]
  • Sajedipour.Davood Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings [ Vol.1, Issue 4 - Autumn Year 2013]
  • Sajjadnejad.Mohammad Synthesis of zinc aluminate (ZnAl2O4) by mechanochemical processing with different molar ratios of ZnS:Al [ Vol.8, Issue 1 - Winter Year 2020]
  • Salahi.Esmail Finite element simulation of pyroplastic deformation, anisotropic shrinkage and heterogeneous densification for ceramic materials during liquid phase sintering process [ Vol.5, Issue 3 - Summer Year 2017]
  • salehi.mehdi Investigation of oxidation behavior and Thermal spray of mechanically milled CoNiCrAlY–YSZ powders [ Vol.3, Issue 1 - Winter Year 2015]
  • salehi.mehdi Effect of morphology and nonbounded interface on dielectric properties of plasma sprayed BaTiO3 Coating [ Vol.2, Issue 4 - Autumn Year 2014]
  • Salimijazi.Hamidreza Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings [ Vol.1, Issue 4 - Autumn Year 2013]
  • Samadi.Hamed Effect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites [ Vol.6, Issue 2 - Spring Year 2018]
  • Samandari.M. M. Upper bound and numerical analysis of cyclic expansion extrusion (CEE) process [ Vol.5, Issue 2 - Spring Year 2017]
  • Samandari.M.M. Numerical investigation of strain distribution during cyclic expansion extrusion (CEE) [ Vol.3, Issue 2 - Spring Year 2015]
  • samari jahromi.hamideh Alfa- Bismuth(III)oxide catalyzed Biginelli reactions using experimentally designed optimized condition [ Vol.3, Issue 4 - Autumn Year 2015]
  • Samimi-sedeh.Sina An optimization and characterization study on sodium ferrate production by electrochemical method [ Vol.7, Issue 4 - Autumn Year 2019]
  • sarpoolaky.Hossien The effects of different molten salt composition on morphology and purity of ZrB2 powder obtained via direct molten salt reaction method [ Vol.3, Issue 3 - Summer Year 2015]
  • Saviz.Mohammad Reza Creep and Stress Redistribution Analysis of Thick-Wall FGM Spheres Subjected to Mechanical Load and Heat Flux – An Analytical Approach [ Vol.8, Issue 3 - Summer Year 2020]
  • Sedaghat.Ali Determination of solution temperature in an ex-service Ni-based turbine blade [ Vol.5, Issue 3 - Summer Year 2017]
  • Sedaghat.Ali Sol-gel synthesis and characterization of alumina-15%mullite composite nanopowder [ Vol.2, Issue 1 - Winter Year 2014]
  • Sedighi.Mohammad Investigation of Roll Bonding between AA5083 Strips [ Vol.4, Issue 3 - Summer Year 2016]
  • Sedighi.Roholamin Synthesis and thermal stability of nanocrystalline Mg-6Al-1Zn-1Si alloy prepared via mechanical alloying [ Vol.3, Issue 1 - Winter Year 2015]
  • SETOUDEH.Nader Synthesis of zinc aluminate (ZnAl2O4) by mechanochemical processing with different molar ratios of ZnS:Al [ Vol.8, Issue 1 - Winter Year 2020]
  • seyedraoufi.zahrasadat Effect of Zn and porosity on the biodegradability and Mechanical Properties of Mg-Zn Scaffolds [ Vol.6, Issue 4 - Autumn Year 2018]
  • shaban.mehdi 3D finite element study of temperature variations during equal channel angular pressing [ Vol.2, Issue 1 - Winter Year 2014]
  • shaban.mehdi Plastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing [ Vol.4, Issue 1 - Winter Year 2016]
  • Shabani.Masoud Polyethylene Glycol Coated NiFe2O4 Nanoparticles Produced by Solution Plasma Method for Biomedical Applications [ Vol.8, Issue 4 - Autumn Year 2020]
  • Shabgard.Mohamad Reza Improving the surface wear resistance of aluminum by electrical discharge process [ Vol.6, Issue 2 - Spring Year 2018]
  • shademani.mohammad Determination of solution temperature in an ex-service Ni-based turbine blade [ Vol.5, Issue 3 - Summer Year 2017]
  • Shafie.Mohammad esmaeil Application of mesoporous silica containing benzotriazole in the epoxy coating applied to plain carbon steel and study of its corrosion behavior [ Vol.6, Issue 3 - Summer Year 2018]
  • Shafie.Mohammad esmaeil Addition of Mo in the Zn based alloy coating in the citrate solution and investigation of its corrosion behavior [ Vol.7, Issue 1 - Winter Year 2019]
  • Shafyei.Ali Effect of Ni-P electroless coating and heat treatment on tribological and corrosion properties of copper substrate [ Vol.6, Issue 4 - Autumn Year 2018]
  • Shafyei.Ali Fabrication of the Ordered Nanocells of Anodic Aluminum Oxide and the Generation of Zn-Mn Ferrite Phase within Them [ Vol.7, Issue 2 - Spring Year 2019]
  • Shahhosseini.Shahrokh Comparing the capability of various models for predicting of the Bayer process parameters [ Vol.6, Issue 1 - Winter Year 2018]
  • Shahimoridi.Esmaeil Study on compressive and compatibility properties of titanium functionally graded scaffolds (FGSs) as bone replacements [ Vol.6, Issue 3 - Summer Year 2018]
  • Shahrabi Farahani.Taghi Inhibitive Assessment of N-(8-bromo-3H-phenoxazin-3-ylidene)-N,N’-Dimethylaminium, as a Novel Corrosion Inhibitor for Mild Steel in 1.0 M HCl [ Vol.2, Issue 3 - Summer Year 2014]
  • Shahriyari.Sadegh Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]
  • shahsavari.p Prediction of forging force and barreling behavior in isothermal hot forging of AlCuMgPb aluminum alloy using artificial neural network [ Vol.6, Issue 1 - Winter Year 2018]
  • Shakeri.Mohammad Sadegh Immobilization of Glucose oxidase on Meso-porous Glass-ceramic with the Skeleton of CaTi4(PO¬4)6 [ Vol.1, Issue 4 - Autumn Year 2013]
  • Shakeri.Mohammad Sadegh Kinetics analysis of electrophoretic deposition using small signal and large signal modeling, Case study: Nano-Mullite suspension [ Vol.4, Issue 4 - Autumn Year 2016]
  • Shamanian.Morteza Investigation of Microstructure weld zone of Hastelloy X Pulsed Nd-YAG laser welds [ Vol.1, Issue 4 - Autumn Year 2013]
  • Shamanian.Morteza The Weldability Evaluation of Dissimilar Welds of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel by Gastungesten Arc Welding [ Vol.1, Issue 4 - Autumn Year 2013]
  • Shamanian.Morteza Investigation of oxidation behavior and Thermal spray of mechanically milled CoNiCrAlY–YSZ powders [ Vol.3, Issue 1 - Winter Year 2015]
  • Sharafi.Shahriyar The Effect of Reverse Pulse Plating and Lanthanum Addition in Plating Bath on Corrosion Resistance of Austenitic Steel in Chlorine Solution [ Vol.9, Issue 3 - Summer Year 2021]
  • Sharbatdaran.Masoomeh Hydrothermal Assisted Sol-Gel Process on Binary Mixtures of Aluminum and Titanium Alkoxides: A Novel Route for the Fabrication of Single Phase Tialite [ Vol.5, Issue 3 - Summer Year 2017]
  • sharifian asl.ghazal Silicothermic production and characterization of FeSiNi/SiO2 Magnetic nanocompsite via mechanical alloying [ Vol.2, Issue 4 - Autumn Year 2014]
  • Shayegh.Behrooz The effect of saccharin on microstructure and corrosion behavior of nanocrystalline nickel thin films in alkaline solution [ Vol.5, Issue 2 - Spring Year 2017]
  • Shayegh.Behrooz Investigation of corrosion behavior of galvanized mild steel by improved Zn acidic bath, containing nano-ZnO particles [ Vol.4, Issue 1 - Winter Year 2016]
  • Shayegh.Behrooz Design and investigation of TiO2 –SiO2 thin films on AISI 316L stainless steel for tribological properties and corrosion protection [ Vol.3, Issue 3 - Summer Year 2015]
  • Shayegh.Behrooz Cerium Oxide Nanoparticles as an Accelerating Agent for Zinc Phosphate Coatings with Enhanced Corrosion Resistance [ Vol.9, Issue 2 - Spring Year 2021]
  • Sheikhi.Elham Fabrication of high–strength alumina composite foams through gel–casting process [ Vol.4, Issue 4 - Autumn Year 2016]
  • Shoa Bargh.Shabnam Immobilization of Glucose oxidase on Meso-porous Glass-ceramic with the Skeleton of CaTi4(PO¬4)6 [ Vol.1, Issue 4 - Autumn Year 2013]
  • shojaie bahaabad.maryam Pore surface fractal dimension of sol-gel derived nanoporous SiO2-ZrO2 membrane [ Vol.4, Issue 4 - Autumn Year 2016]
  • shojaie bahaabad.Maryam Mechanically Activated Combustion Synthesis of B4C-TiB2 Nanocomposite Powder [ Vol.5, Issue 1 - Winter Year 2017]
  • shojaie bahaabad.Maryam Corrosion Properties of 70SiO2-15TiO2-15ZrO2 Ceramic Membrane [ Vol.2, Issue 3 - Summer Year 2014]
  • Shokrolahi.Arash Investigation of the Factors Affecting on the Granulation of ZrB2 Nano-Particles Synthesized by Using Na Metal as Reductant [ Vol.8, Issue 2 - Spring Year 2020]
  • Siyah.Murtdha Electrophoretic deposition technique for coating nano TiO2 on SS316L alloy. [ Vol.6, Issue 4 - Autumn Year 2018]
  • soheily.Mahyar Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]
  • Soleymani asl.Hamideh Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]
  • soltani.masoud Effect of Ni-P electroless coating and heat treatment on tribological and corrosion properties of copper substrate [ Vol.6, Issue 4 - Autumn Year 2018]
  • soltani.masoud Fabrication of anodic aluminium oxide template and the generation of magnetic Co nanowires within it [ Vol.7, Issue 4 - Autumn Year 2019]
  • soltani.masoud Fabrication of the Ordered Nanocells of Anodic Aluminum Oxide and the Generation of Zn-Mn Ferrite Phase within Them [ Vol.7, Issue 2 - Spring Year 2019]
  • Soltani.Sadegh A Study on the Quasi-static Compression Behavior of 5056 Aluminum Alloy Foams [ Vol.10, Issue 4 - Autumn Year 2022]
  • Sonamia.Mohamad Ali Passivity of AISI 316L stainless steel as a function of nitric concentration [ Vol.2, Issue 2 - Spring Year 2014]
  • Soraru.G. Sol-gel synthesis and characterization of alumina-15%mullite composite nanopowder [ Vol.2, Issue 1 - Winter Year 2014]

T

  • Taati.Fateme Finite element simulation of pyroplastic deformation, anisotropic shrinkage and heterogeneous densification for ceramic materials during liquid phase sintering process [ Vol.5, Issue 3 - Summer Year 2017]
  • Tabanfard.Minoo Finite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials [ Vol.4, Issue 2 - Spring Year 2016]
  • Tabeahmadi.mohammad Optimization of Advanced Square Wave AC-GTAW Parameters to Improve Localized Corrosion Resistance of AA6082-T651 Aluminum Welds [ Vol.8, Issue 2 - Spring Year 2020]
  • Tagimalek.Hadi Analytical and Numerical Evaluation of Wire Flat Rolling Process Based on the Slab Method and DEFORM-3D [ Vol.8, Issue 4 - Autumn Year 2020]
  • Tagimalek.Hadi Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties [ Vol.10, Issue 4 - Autumn Year 2022]
  • Tahari.Mostafa Investigation of oxidation behavior and Thermal spray of mechanically milled CoNiCrAlY–YSZ powders [ Vol.3, Issue 1 - Winter Year 2015]
  • Taheri-Nassaj.Ehsan Sol-gel synthesis and characterization of alumina-15%mullite composite nanopowder [ Vol.2, Issue 1 - Winter Year 2014]
  • Taheri-Nassaj.Ehsan Corrosion Properties of 70SiO2-15TiO2-15ZrO2 Ceramic Membrane [ Vol.2, Issue 3 - Summer Year 2014]
  • Tajizadegan.Hamid The Effect of the Mg Content on Mechanosynthesis of ZrB2–SiC–ZrC Composite in the Mg/ZrSiO4/B2O3/C System [ Vol.3, Issue 2 - Spring Year 2015]
  • Talebi.Amir Mechanical Behavior of the Copper Matrix Composite Reinforced by Steel Particles [ Vol.10, Issue 2 - Spring Year 2022]
  • Talebi.Shahram Numerical Simulation of Fluid Flow over a Ceramic Nanoparticle in Drug Delivery System [ Vol.4, Issue 2 - Spring Year 2016]
  • Tamizifar.Morteza Effect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites [ Vol.6, Issue 2 - Spring Year 2018]
  • Tarkesh Esfahani.Rasoul Optimization of laser forming parameters using genetic algorithms [ Vol.7, Issue 1 - Winter Year 2019]
  • Tarkesh.Rasuol Optimization of laser forming parameters using genetic algorithms [ Vol.7, Issue 1 - Winter Year 2019]
  • Tavakoli.Hassan Solvothermal synthesis of copper nanoparticles loaded on multi-wall carbon nanotubes as catalyst for thermal decomposition of ammonium perchlorate [ Vol.3, Issue 2 - Spring Year 2015]
  • Tavoosi.Majid The Relationship between Structural and Optical Properties of GeO2-PbO Glasses [ Vol.5, Issue 2 - Spring Year 2017]
  • THOMAS.SHIJO Fatigue Characterization of High Performance Hybrid Aluminium AA 5083/SiCp/Fly Ash Metal Matrix Composites [ Vol.7, Issue 2 - Spring Year 2019]
  • Tizro.saeed Heavy metals removal from wastewater by using different kinds of magnetite nanoadsorbents: effects of different organic and inorganic coatings on the removal of copper and lead ions [ Vol.4, Issue 4 - Autumn Year 2016]
  • Torabi.H. Numerical investigation of strain distribution during cyclic expansion extrusion (CEE) [ Vol.3, Issue 2 - Spring Year 2015]
  • Torabi.S.H.R. Upper bound and numerical analysis of cyclic expansion extrusion (CEE) process [ Vol.5, Issue 2 - Spring Year 2017]
  • Torabinejad.Bahman Poly (lactic-co-glycolic)/nanostructured merwinite porous composites for bone tissue engineering: II. structural and in vitro characterization [ Vol.2, Issue 4 - Autumn Year 2014]

U

  • U N.KEMPAIAH Fatigue Characterization of High Performance Hybrid Aluminium AA 5083/SiCp/Fly Ash Metal Matrix Composites [ Vol.7, Issue 2 - Spring Year 2019]

V

  • Vaezii.Mohammad Reza Effect of morphology and nonbounded interface on dielectric properties of plasma sprayed BaTiO3 Coating [ Vol.2, Issue 4 - Autumn Year 2014]
  • Vahed.Shohre Evaluation of Photocatalytic Activity of Fe Doped TiO2 Thin Film Prepared by sol-gel hot dip-coating [ Vol.2, Issue 3 - Summer Year 2014]
  • vajd.akbar 3D finite element study of temperature variations during equal channel angular pressing [ Vol.2, Issue 1 - Winter Year 2014]
  • Valanezhad.Alireza CORROSION BEHAVIOR OF BIOACTIVATED TITANIUM DENTAL IMPLANT USING DIFFERENT CHEMICAL METHODS [ Vol.6, Issue 1 - Winter Year 2018]
  • Valizadeh.Bahman Dissimilar DP780/DP980 Resistance Spot Welded joints: Microstructure, Mechanical Properties and Critical Diameter [ Vol.9, Issue 1 - Winter Year 2021]
  • velashjerdi.mohammad The effects of different molten salt composition on morphology and purity of ZrB2 powder obtained via direct molten salt reaction method [ Vol.3, Issue 3 - Summer Year 2015]

W

  • Watanabe.Ikuya CORROSION BEHAVIOR OF BIOACTIVATED TITANIUM DENTAL IMPLANT USING DIFFERENT CHEMICAL METHODS [ Vol.6, Issue 1 - Winter Year 2018]
  • William.Ochen Effect of Quartz Particle Size on Sintering Behavior and Flexural Strength of Porcelain Tiles Made from Raw Materials in Uganda [ Vol.7, Issue 1 - Winter Year 2019]

X

  • xu.hongliang Numerical Modeling of the Shear Module of Alginate Micro-Beads under the Ultrasonic Thermal Effect [ Vol.4, Issue 3 - Summer Year 2016]

Y

  • Y.Madhava Kumar Thermal, optical and dielectric studies of VO2+ doped Poly(vinyl chloride)(PVC) films [ Vol.5, Issue 4 - Autumn Year 2017]
  • Yaghoubi Askarabad.Yaghoub Structural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique [ Vol.5, Issue 1 - Winter Year 2017]
  • Yaghoubi.Hamed Finite element simulation of pyroplastic deformation, anisotropic shrinkage and heterogeneous densification for ceramic materials during liquid phase sintering process [ Vol.5, Issue 3 - Summer Year 2017]
  • Yasaee.Mana Synthesis of nano-structured sphene and mechanical properties optimization of its scaffold via response surface methodology [ Vol.4, Issue 2 - Spring Year 2016]
  • Yazdani.Saeid Fatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution [ Vol.5, Issue 3 - Summer Year 2017]
  • Yeganeh.Mahdi Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]
  • Yeganeh.Mahdi Application of mesoporous silica containing benzotriazole in the epoxy coating applied to plain carbon steel and study of its corrosion behavior [ Vol.6, Issue 3 - Summer Year 2018]
  • Yeganeh.Mahdi Addition of Mo in the Zn based alloy coating in the citrate solution and investigation of its corrosion behavior [ Vol.7, Issue 1 - Winter Year 2019]
  • Yıldırım.Musa The Effects of Mould Materials on Microstructure and Mechanical Properties of Cast A356 Alloy [ Vol.2, Issue 4 - Autumn Year 2014]
  • yılmaz.volkan Characterization of Microstructure and Bending Response of Sheet Material: Influence of Thickness [ Vol.3, Issue 1 - Winter Year 2015]
  • Yoozbashi zadeh.Hossein An investigation on the adsorption behavior of Sb (III) on a cationic ion exchange resin in Fixed-bed column: experimental design and breakthrough curves modeling [ Vol.8, Issue 1 - Winter Year 2020]

Z

  • Zadsar.Mehdi Synthesis and Characterization of Linear/Nonlinear Optical Properties of GO, RGO, RGO-ZNO, and RGO-ZNO-Fe2O4 [ Vol.10, Issue 4 - Autumn Year 2022]
  • Zadsar.Mehdi Linear and Nonlinear Optical Properties in CdSe/ZnS/CdSe and ZnS/CdSe/ZnS Spherical Core-Shell-Shell Quantum Dots [ Vol.11, Issue 1 - Winter Year 2023]
  • Zadshakouyan.Mohammad Optimization of ECMAP parameters in production of ultra-fine grained Al1050 strips using Grey relational analysis [ Vol.3, Issue 4 - Autumn Year 2015]
  • Zadshakouyan.Mohammad Modeling and production of high strength Al strips by equal channel multi angular pressing method [ Vol.3, Issue 4 - Autumn Year 2015]
  • Zaghian.Nima The effect of saccharin on microstructure and corrosion behavior of nanocrystalline nickel thin films in alkaline solution [ Vol.5, Issue 2 - Spring Year 2017]
  • Zahiri.Laleh Evaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method. [ Vol.4, Issue 2 - Spring Year 2016]
  • zakeri.ali Corrosion Properties of 70SiO2-15TiO2-15ZrO2 Ceramic Membrane [ Vol.2, Issue 3 - Summer Year 2014]
  • Zakeri.Mohammad Effect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites [ Vol.6, Issue 2 - Spring Year 2018]
  • Zamani Foroushani.Ruhollah Evolution of Biological Properties of Bioactive Diopside and Wollastonite for Bone Tissue Engineering [ Vol.10, Issue 1 - Winter Year 2022]
  • Zamani Nejad.M Effect of Material Gradient on Stresses of Thick FGM Spherical Pressure Vessels with Exponentially-Varying Properties [ Vol.2, Issue 3 - Summer Year 2014]
  • Zamani Nejad.M Effect of Material Gradient on Stresses of FGM Rotating Thick-Walled Cylindrical Pressure Vessel with Longitudinal Variation of Properties under Non-uniform Internal and External Pressure [ Vol.4, Issue 2 - Spring Year 2016]
  • Zamanian.Ali Synthesis of nano-structured sphene and mechanical properties optimization of its scaffold via response surface methodology [ Vol.4, Issue 2 - Spring Year 2016]
  • Zandrahimi.Morteza Isothermal and cyclic oxidation behavior of AISI 430 ferritic stainless steel coated with titanium [ Vol.6, Issue 2 - Spring Year 2018]
  • Zandrahimi.Morteza Influence of electroplating parameters on microstructure and amount of ceramic particle deposition in Ni-Co-CeO2 composite coating [ Vol.7, Issue 4 - Autumn Year 2019]
  • zanrahimi.morteza Tribological behavior of sputter-deposited MoSX/Ni coatings [ Vol.6, Issue 2 - Spring Year 2018]
  • zanrahimi.morteza Effect of CTAB surfactant on microstructure and oxidation behavior of Ni-TiO2 Composite coating [ Vol.6, Issue 4 - Autumn Year 2018]
  • Zare Bidaki.Arman Fatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution [ Vol.5, Issue 3 - Summer Year 2017]
  • zarei.Alireza Solvothermal synthesis of copper nanoparticles loaded on multi-wall carbon nanotubes as catalyst for thermal decomposition of ammonium perchlorate [ Vol.3, Issue 2 - Spring Year 2015]
  • Zarezadeh.Alireza Prediction of Corrosion Rate for Carbon Steel in Soil Environment by Artificial Neural Network and Genetic Algorithm [ Vol.7, Issue 4 - Autumn Year 2019]
  • zarezadeh.Majid Determination of Residual Stress of PACVD Nanostructure TiN Coatings by GIXRD Method [ Vol.6, Issue 3 - Summer Year 2018]
  • zarezadeh.Majid Thermodynamic analysis of nanocrystalline solid solution formation in the W-Co-Si ternary system by mechanical alloying [ Vol.5, Issue 3 - Summer Year 2017]
  • Zarrabi.Ali Preparation and Determination of the Characteristics of Hydrogel Membrane of Poly-Vinyl Alchol, Starch and Chitosan [ Vol.9, Issue 1 - Winter Year 2021]
  • Zarrin naghsh.Kianoush Effect of Ni-P electroless coating and heat treatment on tribological and corrosion properties of copper substrate [ Vol.6, Issue 4 - Autumn Year 2018]
  • Zeidabadinejad.Hamed Effect of Bonding Time on Microstructure and Mechanical Properties of Transient Liquid Phase Bonding Between WC-Co/St52 [ Vol.11, Issue 1 - Winter Year 2023]
  • Zeinal-Hamadani.Ali Modeling and optimization of precipitation hardening heat treatment factors of Al2024 alloy using a two-level full factorial design [ Vol.3, Issue 2 - Spring Year 2015]
  • Zerafati Shoja.Fariba Passivity of AISI 316L stainless steel as a function of nitric concentration [ Vol.2, Issue 2 - Spring Year 2014]
  • zhang.jianying Numerical Modeling of the Shear Module of Alginate Micro-Beads under the Ultrasonic Thermal Effect [ Vol.4, Issue 3 - Summer Year 2016]
  • zhang.liguo Numerical Modeling of the Shear Module of Alginate Micro-Beads under the Ultrasonic Thermal Effect [ Vol.4, Issue 3 - Summer Year 2016]
  • zhang.zhuangli Numerical Modeling of the Shear Module of Alginate Micro-Beads under the Ultrasonic Thermal Effect [ Vol.4, Issue 3 - Summer Year 2016]
  • Ziaei-Asl.Ali Creep and Stress Redistribution Analysis of Thick-Wall FGM Spheres Subjected to Mechanical Load and Heat Flux – An Analytical Approach [ Vol.8, Issue 3 - Summer Year 2020]
  • zojaji.zahra Optimization of laser forming parameters using genetic algorithms [ Vol.7, Issue 1 - Winter Year 2019]
  • Zolanvari.A. Determination of Residual Stress of PACVD Nanostructure TiN Coatings by GIXRD Method [ Vol.6, Issue 3 - Summer Year 2018]
  • Zuas.Oman Synthesis of the Nano structured Zinc Oxide Using the Soft template of Cylea barbata miers Extract and its Promising Property for Dye Adsorbent [ Vol.3, Issue 1 - Winter Year 2015]

The rights to this website are owned by the Raimag Press Management System.
Copyright © 2021-2024

Home| Login| About Us| Contact Us|
[فارسی] [العربية] [fa] [ar]