T

• Taati.Fateme Finite element simulation of pyroplastic deformation, anisotropic shrinkage and heterogeneous densification for ceramic materials during liquid phase sintering process [ Vol.5, Issue 3 - Summer Year 2017]
• Tabanfard.Minoo Finite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials [ Vol.4, Issue 2 - Spring Year 2016]
• Tabeahmadi.mohammad Optimization of Advanced Square Wave AC-GTAW Parameters to Improve Localized Corrosion Resistance of AA6082-T651 Aluminum Welds [ Vol.8, Issue 2 - Spring Year 2020]
• Tagimalek.Hadi Analytical and Numerical Evaluation of Wire Flat Rolling Process Based on the Slab Method and DEFORM-3D [ Vol.8, Issue 4 - Autumn Year 2020]
• Tagimalek.Hadi Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties [ Vol.10, Issue 4 - Autumn Year 2022]
• Tahari.Mostafa Investigation of oxidation behavior and Thermal spray of mechanically milled CoNiCrAlY–YSZ powders [ Vol.3, Issue 1 - Winter Year 2015]
• Taheri-Nassaj.Ehsan Sol-gel synthesis and characterization of alumina-15%mullite composite nanopowder [ Vol.2, Issue 1 - Winter Year 2014]
• Taheri-Nassaj.Ehsan Corrosion Properties of 70SiO2-15TiO2-15ZrO2 Ceramic Membrane [ Vol.2, Issue 3 - Summer Year 2014]
• Tajizadegan.Hamid The Effect of the Mg Content on Mechanosynthesis of ZrB2–SiC–ZrC Composite in the Mg/ZrSiO4/B2O3/C System [ Vol.3, Issue 2 - Spring Year 2015]
• Talebi.Amir Mechanical Behavior of the Copper Matrix Composite Reinforced by Steel Particles [ Vol.10, Issue 2 - Spring Year 2022]
• Talebi.Shahram Numerical Simulation of Fluid Flow over a Ceramic Nanoparticle in Drug Delivery System [ Vol.4, Issue 2 - Spring Year 2016]
• Tamizifar.Morteza Effect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites [ Vol.6, Issue 2 - Spring Year 2018]
• Tarkesh Esfahani.Rasoul Optimization of laser forming parameters using genetic algorithms [ Vol.7, Issue 1 - Winter Year 2019]
• Tarkesh.Rasuol Optimization of laser forming parameters using genetic algorithms [ Vol.7, Issue 1 - Winter Year 2019]
• Tavakoli.Hassan Solvothermal synthesis of copper nanoparticles loaded on multi-wall carbon nanotubes as catalyst for thermal decomposition of ammonium perchlorate [ Vol.3, Issue 2 - Spring Year 2015]
• Tavoosi.Majid The Relationship between Structural and Optical Properties of GeO2-PbO Glasses [ Vol.5, Issue 2 - Spring Year 2017]
• THOMAS.SHIJO Fatigue Characterization of High Performance Hybrid Aluminium AA 5083/SiCp/Fly Ash Metal Matrix Composites [ Vol.7, Issue 2 - Spring Year 2019]
• Tizro.saeed Heavy metals removal from wastewater by using different kinds of magnetite nanoadsorbents: effects of different organic and inorganic coatings on the removal of copper and lead ions [ Vol.4, Issue 4 - Autumn Year 2016]
• Torabi.H. Numerical investigation of strain distribution during cyclic expansion extrusion (CEE) [ Vol.3, Issue 2 - Spring Year 2015]
• Torabi.S.H.R. Upper bound and numerical analysis of cyclic expansion extrusion (CEE) process [ Vol.5, Issue 2 - Spring Year 2017]
• Torabinejad.Bahman Poly (lactic-co-glycolic)/nanostructured merwinite porous composites for bone tissue engineering: II. structural and in vitro characterization [ Vol.2, Issue 4 - Autumn Year 2014]