B

  • Babaei.Alireza A new approach for fabrication of bulk MMCs using Accumulative Channel-die Compression Bonding (ACCB) [ Vol.2, Issue 2 - Spring Year 2014]
  • Babagil.Aynur Green Synthesis of Nanoceria (CeO2) and Evaluation of Enzyme like Characteristics [ Vol.6, Issue 3 - Summer Year 2018]
  • Bafandeh.Mohammad Reza Fabrication, Characterization and Osteoblast Response of Cobalt-Based Alloy/Nano Bioactive Glass Composites [ Vol.4, Issue 3 - Summer Year 2016]
  • Baghaei.Ali Inclusion Removal Mechanisms of Al-Killed 304 Low Carbon Stainless Steel Melt Using Hercynite Coated Al2O3-C Ceramic Foam Filters [ Vol.9, Issue 2 - Spring Year 2021]
  • Baghaei.M.R. Punch plastic deformation pipe cladding (PPDPC) as a novel tube cladding method [ Vol.4, Issue 2 - Spring Year 2016]
  • baghaie.shaghaiegh Preparation and Determination of the Characteristics of Hydrogel Membrane of Poly-Vinyl Alchol, Starch and Chitosan [ Vol.9, Issue 1 - Winter Year 2021]
  • Baghban-Eslaminejad.Mohamadreza Poly (lactic-co-glycolic)/nanostructured merwinite porous composites for bone tissue engineering: II. structural and in vitro characterization [ Vol.2, Issue 4 - Autumn Year 2014]
  • Bagheri.Fatemeh Poly (lactic-co-glycolic)/nanostructured merwinite porous composites for bone tissue engineering: II. structural and in vitro characterization [ Vol.2, Issue 4 - Autumn Year 2014]
  • Bagherzadeh.Mojtaba Effect of co-doping on hydrophilic and photoelectric properties of co-doped titania nanoparticles as a composition of electrode modifier [ Vol.7, Issue 3 - Summer Year 2019]
  • Bagherzadeh.Mojtaba Synthesis, characterization and application of graphene oxide, graphene oxide quantum dots and graphene quantum dots in photoelectrochemical sensors [ Vol.7, Issue 2 - Spring Year 2019]
  • Baghi Baghban.Hooman Taguchi optimization of TiO2 thin film to defeat microbiologically induced corrosion of stainless steel [ Vol.7, Issue 1 - Winter Year 2019]
  • Bahmanpour.Maryam Modelling Dependency of the Steady-State Grain Size on the Stacking Fault Energy in Severely Plastic Deformed Materials [ Vol.9, Issue 3 - Summer Year 2021]
  • Bahmanpour.Maryam A New Classical-Quantum Model for Comparing the Magnetization of Ferromagnetic and Superparamagnetic Nanoparticles During Magnetic Hyperthermia [ Vol.10, Issue 3 - Summer Year 2022]
  • Bahrami-Abadi.Mina Reinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber [ Vol.4, Issue 3 - Summer Year 2016]
  • Bahramian.Bahram Schiff base functionalized Fe3O4@Boehmite Core-Shell Nano-Particles to Support MoO2(acac)2 for Catalytic Epoxidation of Alkenes [ Vol.7, Issue 1 - Winter Year 2019]
  • Bahreini.Habibollah The Effect of Multi-Walled Carbon Nanotubes on CO2/N2 Separation Using Sulfonated Polyether Ether Ketone/Polyetherimide Nano Composite Membrane [ Vol.11, Issue 1 - Winter Year 2023]
  • Bakhsheshi Rad.Hamid Reza Polyethylene Glycol Coated NiFe2O4 Nanoparticles Produced by Solution Plasma Method for Biomedical Applications [ Vol.8, Issue 4 - Autumn Year 2020]
  • Bakhsheshi Rad.Hamid Reza Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]
  • Bakhsheshi Rad.Hamid Reza Effects of Active Material Particles Size Distribution on the Fabrication of TiNb2O7 Electrode Used in Lithium-Ion Batteries [ Vol.9, Issue 3 - Summer Year 2021]
  • Bakhsheshi-Rad.Hamid Reza Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
  • Bakhsheshi-Rad.Hamid Reza Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]
  • Bakhsheshi-Rad.Hamid Reza GEP-based Modeling for Predicting Sponge Iron Metallization in Persian Direct Reduction (PERED) Method [ Vol.9, Issue 4 - Autumn Year 2021]
  • Bakhtiari.Leila The Effect of Reverse Pulse Plating and Lanthanum Addition in Plating Bath on Corrosion Resistance of Austenitic Steel in Chlorine Solution [ Vol.9, Issue 3 - Summer Year 2021]
  • Bakhtiarvand.Sogol Polymer-Assisted Synthesis and Characterization of Nickel Aluminate Nanoparticles for Photodegradation of Methylene Blue [ Vol.9, Issue 4 - Autumn Year 2021]
  • Barekat.Masoud Effect of Laser Parameters on Geometry of Cladded Stellite 6 on 35CrMo Steel Substrate and its Characterization [ Vol.11, Issue 2 - Spring Year 2023]
  • baseri.hadi Heavy metals removal from wastewater by using different kinds of magnetite nanoadsorbents: effects of different organic and inorganic coatings on the removal of copper and lead ions [ Vol.4, Issue 4 - Autumn Year 2016]
  • Bashirisafa.Ali Synthesis of (Tix,W1-x)3SiC2 MAX phase by mechanical milling [ Vol.7, Issue 4 - Autumn Year 2019]
  • Bassidi.Touriya Elastic characterization of porous bone by ultrasonic method through Lamb waves [ Vol.5, Issue 2 - Spring Year 2017]
  • Bayat.Omid Age-Hardening Behavior and the Related Changes in a Silver-Copper-Palladium Alloy [ Vol.8, Issue 2 - Spring Year 2020]
  • Beheshtian.Azam Fabrication of Silver Oxide and Nickel Oxide Nanoparticles by Green Synthesis Method Using Malva Sylvestris Plant Extract [ Vol.11, Issue 1 - Winter Year 2023]
  • Bermudez Reyes.Barbara Characterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates [ Vol.6, Issue 1 - Winter Year 2018]
  • Beygi.Reza Thermodynamic analysis of nanocrystalline solid solution formation in the W-Co-Si ternary system by mechanical alloying [ Vol.5, Issue 3 - Summer Year 2017]
  • Beytolamani.Meysam Using design of experiments approach and simulated annealing algorithm for modeling and Optimization of EDM process parameters [ Vol.6, Issue 3 - Summer Year 2018]
  • Beytolamani.Meysam Simultaneously Modeling and Optimization of Heat Affected Zone and Tensile Strength in GTAW Process Using Simulated Annealing Algorithm [ Vol.9, Issue 2 - Spring Year 2021]
  • Boka.Behnaz Effect of Titania Colloid Solution Concentration on Hydrophobicity of Well-Aligned TiO2 Nanorods Synthesized via Hydrothermal Method [ Vol.2, Issue 1 - Winter Year 2014]
  • Borhain.G.H. An investigation on Al6061/TiB2 nano composites production through Mechanical Alloying route and their corrosion behavior [ Vol.6, Issue 2 - Spring Year 2018]
  • Boukhris.Imed Study of charge dynamic and breakdown phenomenon in insulating materials using a bipolar charge transport model [ Vol.8, Issue 2 - Spring Year 2020]
  • Bozorg.Mansoor Inhibitive Assessment of N-(8-bromo-3H-phenoxazin-3-ylidene)-N,N’-Dimethylaminium, as a Novel Corrosion Inhibitor for Mild Steel in 1.0 M HCl [ Vol.2, Issue 3 - Summer Year 2014]