S

• saad.mohamed Processing of aluminum flake powder via high energy ball milling under different conditions reaching to aluminum nanoparticles [ Vol.7, Issue 2 - Spring Year 2019]
• Saadi.Foad Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings [ Vol.1, Issue 4 - Autumn Year 2013]
• sabaghian.marzie Alfa- Bismuth(III)oxide catalyzed Biginelli reactions using experimentally designed optimized condition [ Vol.3, Issue 4 - Autumn Year 2015]
• Sabea Amnas.Hussein Electrophoretic deposition technique for coating nano TiO2 on SS316L alloy. [ Vol.6, Issue 4 - Autumn Year 2018]
• Saberifar.Saeid Recycling Evaluation of Mill Scale in Electric Arc Furnace [ Vol.2, Issue 3 - Summer Year 2014]
• Sadeghi Gogheri.Mojtaba GEP-based Modeling for Predicting Sponge Iron Metallization in Persian Direct Reduction (PERED) Method [ Vol.9, Issue 4 - Autumn Year 2021]
• Sadeghi.Babak Development and Evaluation of Nanomagnetic Carrier for the Controlled Loading and Release of Celecoxib [ Vol.10, Issue 1 - Winter Year 2022]
• Sadeghi.Babak One-pot synthesis of Ag/Fe3O4 nanocomposite: Preparation, characterization and efficient catalyst [ Vol.5, Issue 3 - Summer Year 2017]
• Sadeghian.Zohreh Investigating the effect of tool dimension and rotational speed on microstructure of Al-B4C surface composite layer produced by friction stir processing (FSP) [ Vol.3, Issue 2 - Spring Year 2015]
• Sadeghpour.Parisa Synthesis of Nanostructured MnNiAPSO-34 Catalyst: Catalytic Properties and Performance [ Vol.2, Issue 2 - Spring Year 2014]
• Sadrkhah.M. Evaluation of Microstructure and Tensile Behavior of Fine-Grained AZ61 Alloy Tube Processed by Severe Plastic Deformation [ Vol.7, Issue 3 - Summer Year 2019]
• Saebnoori.Ehsan The study of the elements migration from the matrix phases to the grain boundary effects on the creep rupture of G-NiCrTi28W alloy at elevated temperature [ Vol.7, Issue 1 - Winter Year 2019]
• Saebnoori.Ehsan Polyethylene Glycol Coated NiFe2O4 Nanoparticles Produced by Solution Plasma Method for Biomedical Applications [ Vol.8, Issue 4 - Autumn Year 2020]
• Saebnoori.Ehsan An optimization and characterization study on sodium ferrate production by electrochemical method [ Vol.7, Issue 4 - Autumn Year 2019]
• Saebnoori.Ehsan Prediction of Corrosion Rate for Carbon Steel in Soil Environment by Artificial Neural Network and Genetic Algorithm [ Vol.7, Issue 4 - Autumn Year 2019]
• Saeedi.Behnaz The Study of High Temperature Oxidation behavior of Different Microstructures of HVOF Thermally Sprayed Coatings [ Vol.2, Issue 2 - Spring Year 2014]
• saeri.Moahammad Evaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method. [ Vol.4, Issue 2 - Spring Year 2016]
• Safari.Mehdi Dissimilar resistance spot welding of AISI 1075 eutectoid steel to AISI 201 stainless steel [ Vol.5, Issue 1 - Winter Year 2017]
• Saffar.Ali Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]
• saghirzadeh darki.shakiba Novel BCP-Bioactive Glass-Akermanite/PCL Composite Scaffold: Physical and Mechanical Behavior, and in Vitro Bioactivity [ Vol.8, Issue 3 - Summer Year 2020]
• Saidi.Ali Silicothermic production and characterization of FeSiNi/SiO2 Magnetic nanocompsite via mechanical alloying [ Vol.2, Issue 4 - Autumn Year 2014]
• Saidi.Ali The Effect of sintering temperature on microstructure and hardness of milled WC- 20 wt.% equiatomic (Fe,Co) cemented carbides [ Vol.3, Issue 1 - Winter Year 2015]
• Saidi.Ali Effects of Replacing Fluorine with Sodium and Titanium Oxides on Continuous Casting of Steel Mold Powders Lubrication [ Vol.3, Issue 1 - Winter Year 2015]
• Saidi.Ali Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying [ Vol.2, Issue 3 - Summer Year 2014]
• Saidi.Ali Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling [ Vol.2, Issue 3 - Summer Year 2014]
• Saidi.Ali Production and Characterization of Nano Crystalline Fe85Si10Ni5 Soft Magnetic Alloys by Mechanical Alloying [ Vol.2, Issue 4 - Autumn Year 2014]
• Sajedipour.Davood Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings [ Vol.1, Issue 4 - Autumn Year 2013]
• Sajjadnejad.Mohammad Synthesis of zinc aluminate (ZnAl2O4) by mechanochemical processing with different molar ratios of ZnS:Al [ Vol.8, Issue 1 - Winter Year 2020]
• Salahi.Esmail Finite element simulation of pyroplastic deformation, anisotropic shrinkage and heterogeneous densification for ceramic materials during liquid phase sintering process [ Vol.5, Issue 3 - Summer Year 2017]
• salehi.mehdi Investigation of oxidation behavior and Thermal spray of mechanically milled CoNiCrAlY–YSZ powders [ Vol.3, Issue 1 - Winter Year 2015]
• salehi.mehdi Effect of morphology and nonbounded interface on dielectric properties of plasma sprayed BaTiO3 Coating [ Vol.2, Issue 4 - Autumn Year 2014]
• Salimijazi.Hamidreza Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings [ Vol.1, Issue 4 - Autumn Year 2013]
• Samadi.Hamed Effect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites [ Vol.6, Issue 2 - Spring Year 2018]
• Samandari.M. M. Upper bound and numerical analysis of cyclic expansion extrusion (CEE) process [ Vol.5, Issue 2 - Spring Year 2017]
• Samandari.M.M. Numerical investigation of strain distribution during cyclic expansion extrusion (CEE) [ Vol.3, Issue 2 - Spring Year 2015]
• samari jahromi.hamideh Alfa- Bismuth(III)oxide catalyzed Biginelli reactions using experimentally designed optimized condition [ Vol.3, Issue 4 - Autumn Year 2015]
• Samimi-sedeh.Sina An optimization and characterization study on sodium ferrate production by electrochemical method [ Vol.7, Issue 4 - Autumn Year 2019]
• sarpoolaky.Hossien The effects of different molten salt composition on morphology and purity of ZrB2 powder obtained via direct molten salt reaction method [ Vol.3, Issue 3 - Summer Year 2015]
• Saviz.Mohammad Reza Creep and Stress Redistribution Analysis of Thick-Wall FGM Spheres Subjected to Mechanical Load and Heat Flux – An Analytical Approach [ Vol.8, Issue 3 - Summer Year 2020]
• Sedaghat.Ali Sol-gel synthesis and characterization of alumina-15%mullite composite nanopowder [ Vol.2, Issue 1 - Winter Year 2014]
• Sedaghat.Ali Determination of solution temperature in an ex-service Ni-based turbine blade [ Vol.5, Issue 3 - Summer Year 2017]
• Sedighi.Mohammad Investigation of Roll Bonding between AA5083 Strips [ Vol.4, Issue 3 - Summer Year 2016]
• Sedighi.Roholamin Synthesis and thermal stability of nanocrystalline Mg-6Al-1Zn-1Si alloy prepared via mechanical alloying [ Vol.3, Issue 1 - Winter Year 2015]
• SETOUDEH.Nader Synthesis of zinc aluminate (ZnAl2O4) by mechanochemical processing with different molar ratios of ZnS:Al [ Vol.8, Issue 1 - Winter Year 2020]
• seyedraoufi.zahrasadat Effect of Zn and porosity on the biodegradability and Mechanical Properties of Mg-Zn Scaffolds [ Vol.6, Issue 4 - Autumn Year 2018]
• shaban.mehdi Plastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing [ Vol.4, Issue 1 - Winter Year 2016]
• shaban.mehdi 3D finite element study of temperature variations during equal channel angular pressing [ Vol.2, Issue 1 - Winter Year 2014]
• Shabani.Masoud Polyethylene Glycol Coated NiFe2O4 Nanoparticles Produced by Solution Plasma Method for Biomedical Applications [ Vol.8, Issue 4 - Autumn Year 2020]
• Shabgard.Mohamad Reza Improving the surface wear resistance of aluminum by electrical discharge process [ Vol.6, Issue 2 - Spring Year 2018]
• shademani.mohammad Determination of solution temperature in an ex-service Ni-based turbine blade [ Vol.5, Issue 3 - Summer Year 2017]
• Shafie.Mohammad esmaeil Application of mesoporous silica containing benzotriazole in the epoxy coating applied to plain carbon steel and study of its corrosion behavior [ Vol.6, Issue 3 - Summer Year 2018]
• Shafie.Mohammad esmaeil Addition of Mo in the Zn based alloy coating in the citrate solution and investigation of its corrosion behavior [ Vol.7, Issue 1 - Winter Year 2019]
• Shafyei.Ali Effect of Ni-P electroless coating and heat treatment on tribological and corrosion properties of copper substrate [ Vol.6, Issue 4 - Autumn Year 2018]
• Shafyei.Ali Fabrication of the Ordered Nanocells of Anodic Aluminum Oxide and the Generation of Zn-Mn Ferrite Phase within Them [ Vol.7, Issue 2 - Spring Year 2019]
• Shahhosseini.Shahrokh Comparing the capability of various models for predicting of the Bayer process parameters [ Vol.6, Issue 1 - Winter Year 2018]
• Shahimoridi.Esmaeil Study on compressive and compatibility properties of titanium functionally graded scaffolds (FGSs) as bone replacements [ Vol.6, Issue 3 - Summer Year 2018]
• Shahrabi Farahani.Taghi Inhibitive Assessment of N-(8-bromo-3H-phenoxazin-3-ylidene)-N,N’-Dimethylaminium, as a Novel Corrosion Inhibitor for Mild Steel in 1.0 M HCl [ Vol.2, Issue 3 - Summer Year 2014]
• Shahriyari.Sadegh Electromagnetic Waves Absorption of the Epoxy Resin-MWCNT Composite Synthesis via Ultrasonic Bath and Milling Process [ Vol.10, Issue 1 - Winter Year 2022]
• shahsavari.p Prediction of forging force and barreling behavior in isothermal hot forging of AlCuMgPb aluminum alloy using artificial neural network [ Vol.6, Issue 1 - Winter Year 2018]
• Shakeri.Mohammad Sadegh Kinetics analysis of electrophoretic deposition using small signal and large signal modeling, Case study: Nano-Mullite suspension [ Vol.4, Issue 4 - Autumn Year 2016]
• Shakeri.Mohammad Sadegh Immobilization of Glucose oxidase on Meso-porous Glass-ceramic with the Skeleton of CaTi4(PO¬4)6 [ Vol.1, Issue 4 - Autumn Year 2013]
• Shamanian.Morteza The Weldability Evaluation of Dissimilar Welds of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel by Gastungesten Arc Welding [ Vol.1, Issue 4 - Autumn Year 2013]
• Shamanian.Morteza Investigation of oxidation behavior and Thermal spray of mechanically milled CoNiCrAlY–YSZ powders [ Vol.3, Issue 1 - Winter Year 2015]
• Shamanian.Morteza Investigation of Microstructure weld zone of Hastelloy X Pulsed Nd-YAG laser welds [ Vol.1, Issue 4 - Autumn Year 2013]
• Sharafi.Shahriyar The Effect of Reverse Pulse Plating and Lanthanum Addition in Plating Bath on Corrosion Resistance of Austenitic Steel in Chlorine Solution [ Vol.9, Issue 3 - Summer Year 2021]
• Sharbatdaran.Masoomeh Hydrothermal Assisted Sol-Gel Process on Binary Mixtures of Aluminum and Titanium Alkoxides: A Novel Route for the Fabrication of Single Phase Tialite [ Vol.5, Issue 3 - Summer Year 2017]
• sharifian asl.ghazal Silicothermic production and characterization of FeSiNi/SiO2 Magnetic nanocompsite via mechanical alloying [ Vol.2, Issue 4 - Autumn Year 2014]
• Shayegh.Behrooz The effect of saccharin on microstructure and corrosion behavior of nanocrystalline nickel thin films in alkaline solution [ Vol.5, Issue 2 - Spring Year 2017]
• Shayegh.Behrooz Design and investigation of TiO2 –SiO2 thin films on AISI 316L stainless steel for tribological properties and corrosion protection [ Vol.3, Issue 3 - Summer Year 2015]
• Shayegh.Behrooz Investigation of corrosion behavior of galvanized mild steel by improved Zn acidic bath, containing nano-ZnO particles [ Vol.4, Issue 1 - Winter Year 2016]
• Shayegh.Behrooz Cerium Oxide Nanoparticles as an Accelerating Agent for Zinc Phosphate Coatings with Enhanced Corrosion Resistance [ Vol.9, Issue 2 - Spring Year 2021]
• Sheikhi.Elham Fabrication of high–strength alumina composite foams through gel–casting process [ Vol.4, Issue 4 - Autumn Year 2016]
• Shoa Bargh.Shabnam Immobilization of Glucose oxidase on Meso-porous Glass-ceramic with the Skeleton of CaTi4(PO¬4)6 [ Vol.1, Issue 4 - Autumn Year 2013]
• shojaie bahaabad.maryam Pore surface fractal dimension of sol-gel derived nanoporous SiO2-ZrO2 membrane [ Vol.4, Issue 4 - Autumn Year 2016]
• shojaie bahaabad.Maryam Mechanically Activated Combustion Synthesis of B4C-TiB2 Nanocomposite Powder [ Vol.5, Issue 1 - Winter Year 2017]
• shojaie bahaabad.Maryam Corrosion Properties of 70SiO2-15TiO2-15ZrO2 Ceramic Membrane [ Vol.2, Issue 3 - Summer Year 2014]
• Shokrolahi.Arash Investigation of the Factors Affecting on the Granulation of ZrB2 Nano-Particles Synthesized by Using Na Metal as Reductant [ Vol.8, Issue 2 - Spring Year 2020]
• Siyah.Murtdha Electrophoretic deposition technique for coating nano TiO2 on SS316L alloy. [ Vol.6, Issue 4 - Autumn Year 2018]
• skandari.Mostafa Effect of Filler Metal Type on the Microstructure of Welded Joints of HP Heat-Resistant Steel Modified by Niobium [ Vol.11, Issue 2 - Spring Year 2023]
• soheily.Mahyar Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]
• Soleymani asl.Hamideh Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]
• soltani.masoud Effect of Ni-P electroless coating and heat treatment on tribological and corrosion properties of copper substrate [ Vol.6, Issue 4 - Autumn Year 2018]
• soltani.masoud Fabrication of the Ordered Nanocells of Anodic Aluminum Oxide and the Generation of Zn-Mn Ferrite Phase within Them [ Vol.7, Issue 2 - Spring Year 2019]
• soltani.masoud Fabrication of anodic aluminium oxide template and the generation of magnetic Co nanowires within it [ Vol.7, Issue 4 - Autumn Year 2019]
• Soltani.Sadegh A Study on the Quasi-static Compression Behavior of 5056 Aluminum Alloy Foams [ Vol.10, Issue 4 - Autumn Year 2022]
• Sonamia.Mohamad Ali Passivity of AISI 316L stainless steel as a function of nitric concentration [ Vol.2, Issue 2 - Spring Year 2014]
• Soraru.G. Sol-gel synthesis and characterization of alumina-15%mullite composite nanopowder [ Vol.2, Issue 1 - Winter Year 2014]