D

• D'ujanga.Florence Effect of Quartz Particle Size on Sintering Behavior and Flexural Strength of Porcelain Tiles Made from Raw Materials in Uganda [ Vol.7, Issue 1 - Winter Year 2019]
• Dabbaghi.Mahnaz Evaluation of Flow Behavior of Novel Titanium Ti-3873 Alloy Via Compressive Deformation in Two Phase α/β and Single Phase β Regions [ Vol.11, Issue 2 - Spring Year 2023]
• Dadgar Asl.Yaghoub Thermomechanical Comparison Between Bobbin and Conventional Friction Stir Welding of A356 Aluminum Alloy [ Vol.11, Issue 2 - Spring Year 2023]
• Dadkhah Tehrani.Mohammad Hassan Structural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique [ Vol.5, Issue 1 - Winter Year 2017]
• Dadkhah Tehrani.Mohammad Hossein Structural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique [ Vol.5, Issue 1 - Winter Year 2017]
• Daryaban.Marjan Fine Grain Formation in as Cold Worked SP700 Titanium Alloy and Its Effect on Mechanical and Superplastic Properties [ Vol.11, Issue 2 - Spring Year 2023]
• Davoodi.anial Investigation of Microstructure and Mechanical Properties of Ni-Cu-P Coatings Deposited by the Electroless Method [ Vol.10, Issue 2 - Spring Year 2022]
• Davoodi.Sayyed Mohammad Reza Nonlinear Optimization of Hot Metal Profit in Blast Furnace Based on the Decrease of Coke Consumption Rate Case Study: Esfahan Steel Company [ Vol.7, Issue 3 - Summer Year 2019]
• Dehmolaei.Reza The Improvement of Mechanical Properties of the Incoloy 825 Weld Metal by Applying Electromagnetic Vibration [ Vol.9, Issue 2 - Spring Year 2021]
• Dehmolaei.Reza Microstructural Aspects in the Diffusion Bonding of Zr702 to A516 Steel with Ni/Mo/Ti Multi-Interlayer [ Vol.11, Issue 4 - Autumn Year 2023]
• Dehmolaei.Reza Effect of Filler Metal Type on the Microstructure of Welded Joints of HP Heat-Resistant Steel Modified by Niobium [ Vol.11, Issue 2 - Spring Year 2023]
• Dehmolaei.Reza Statistical Approach on Corrosion Behavior of Dissimilar Welds of A387-Gr91/AISI316 Steels with PCGTAW Process [ Vol.5, Issue 1 - Winter Year 2017]
• Dehmolaei.Reza Optimization of Advanced Square Wave AC-GTAW Parameters to Improve Localized Corrosion Resistance of AA6082-T651 Aluminum Welds [ Vol.8, Issue 2 - Spring Year 2020]
• Dehnavi.Armin Improvement Impact Manufacturing Parameteres of Aluminum Foams [ Vol.6, Issue 4 - Autumn Year 2018]
• Deilami Azodi.Hamed A Study on the Quasi-static Compression Behavior of 5056 Aluminum Alloy Foams [ Vol.10, Issue 4 - Autumn Year 2022]
• dezhsetan.arash Production and Characterization of Nano Crystalline Fe85Si10Ni5 Soft Magnetic Alloys by Mechanical Alloying [ Vol.2, Issue 4 - Autumn Year 2014]
• dilipak.hakan Characterization of Microstructure and Bending Response of Sheet Material: Influence of Thickness [ Vol.3, Issue 1 - Winter Year 2015]
• Doodman Tipi.Alireza Influence of Converter and inverter on dynamic behavior of the GMAW process [ Vol.2, Issue 4 - Autumn Year 2014]
• Dost- mohammadi.Ali Reinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber [ Vol.4, Issue 3 - Summer Year 2016]