G

• gökmeşe.Hakan Characterization of Microstructure and Bending Response of Sheet Material: Influence of Thickness [ Vol.3, Issue 1 - Winter Year 2015]
• G.RAVICHANDRAN Fatigue Characterization of High Performance Hybrid Aluminium AA 5083/SiCp/Fly Ash Metal Matrix Composites [ Vol.7, Issue 2 - Spring Year 2019]
• Gafarzadeh.Hossein A new approach for fabrication of bulk MMCs using Accumulative Channel-die Compression Bonding (ACCB) [ Vol.2, Issue 2 - Spring Year 2014]
• Gafarzadeh.Hossein Continuous Grain Refinement of Pure Aluminum During Cyclic Contraction/Expansion Extrusion (CCEE) Analyses by Micromechanical-Based FE and Experimental Methods [ Vol.11, Issue 1 - Winter Year 2023]
• Ganjali.Mansoureh Characterization of nanostructured SnO2 thin film coated by Ag nanoparticles [ Vol.2, Issue 2 - Spring Year 2014]
• Ganjali.Mansoureh Effect of Heat Treatment on Structural and Magnetic Properties of Nanocrystalline SrFe12O19 Hexaferrite synthesized by Co-Precipitation Method [ Vol.1, Issue 4 - Autumn Year 2013]
• Ganjali.Monireh Effect of Heat Treatment on Structural and Magnetic Properties of Nanocrystalline SrFe12O19 Hexaferrite synthesized by Co-Precipitation Method [ Vol.1, Issue 4 - Autumn Year 2013]
• Ganjali.Monireh Characterization of nanostructured SnO2 thin film coated by Ag nanoparticles [ Vol.2, Issue 2 - Spring Year 2014]
• ghadiri.masoud Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying [ Vol.2, Issue 3 - Summer Year 2014]
• Ghaemi.Ahad Comparing the capability of various models for predicting of the Bayer process parameters [ Vol.6, Issue 1 - Winter Year 2018]
• Ghani Kolahloo.Niloofar Synthesis of zinc aluminate (ZnAl2O4) by mechanochemical processing with different molar ratios of ZnS:Al [ Vol.8, Issue 1 - Winter Year 2020]
• Ghannad.Mehdi Effect of Material Gradient on Stresses of FGM Rotating Thick-Walled Cylindrical Pressure Vessel with Longitudinal Variation of Properties under Non-uniform Internal and External Pressure [ Vol.4, Issue 2 - Spring Year 2016]
• Gharagozloua.Mehrnaz Amelioration of the acid blue oxidation process by as-synthesized ZnO nanoparticles: Optimization of the dye and photocatalyst concentration together with the pH of the solution [ Vol.6, Issue 2 - Spring Year 2018]
• Gharahkhani.Raziyeh Fabrication, Characterization and Osteoblast Response of Cobalt-Based Alloy/Nano Bioactive Glass Composites [ Vol.4, Issue 3 - Summer Year 2016]
• gharavi.farhad Study the effect of the friction stir process on the microstructure and mechanical behavior of the AZ31 as-cast alloy joint [ Vol.7, Issue 2 - Spring Year 2019]
• gharavi.farhad Investigation on High Temperature Wear Resistance of Cryotreated Hot Work Tool Steel [ Vol.7, Issue 3 - Summer Year 2019]
• Gharavi.Farhad An investigation on Al6061/TiB2 nano composites production through Mechanical Alloying route and their corrosion behavior [ Vol.6, Issue 2 - Spring Year 2018]
• Gharehchahi.Hamidreza New Iteration based Algorithm for Shape Optimization of Internal and External Boundaries of the Initial Blank in the Deep Drawing Process [ Vol.8, Issue 3 - Summer Year 2020]
• Gharibi.Mahboobeh Effect of Material Gradient on Stresses of Thick FGM Spherical Pressure Vessels with Exponentially-Varying Properties [ Vol.2, Issue 3 - Summer Year 2014]
• Ghasemi.Farshad Damage detection and structural health monitoring of ST-37 plate using smart materials and signal processing by artificial neural networks [ Vol.5, Issue 3 - Summer Year 2017]
• Ghasemi.Samad Synthesis of (Tix,W1-x)3SiC2 MAX phase by mechanical milling [ Vol.7, Issue 4 - Autumn Year 2019]
• Ghashang.Majid Magnetic and Structural Characteristics of Fe2O3 Nanostructure Synthesized in the Presence of Sour Cherry Juice [ Vol.4, Issue 3 - Summer Year 2016]
• Ghassemi.Aazam Using of Thermoplastic Polyurethane Granule (TPU) as a Reinforcing Phase and Self-Healing Agent in a Polymer Composite Resin Epoxy to Exhibit Mechanical Properties Recovery [ Vol.10, Issue 2 - Spring Year 2022]
• Ghayour.Hamid Effect of Titania Colloid Solution Concentration on Hydrophobicity of Well-Aligned TiO2 Nanorods Synthesized via Hydrothermal Method [ Vol.2, Issue 1 - Winter Year 2014]
• Ghayour.Hamid A New Classical-Quantum Model for Comparing the Magnetization of Ferromagnetic and Superparamagnetic Nanoparticles During Magnetic Hyperthermia [ Vol.10, Issue 3 - Summer Year 2022]
• ghazi mir saeed.seyed Mahdi The Effect of Magnesium on the Microstructure and Stress Rupture Properties of Hastelloy X Supealloy [ Vol.7, Issue 3 - Summer Year 2019]
• Ghazitabar.Arash Hydrochemically separation of gold from Copper Anode Slime by means of Thiourea solution [ Vol.5, Issue 1 - Winter Year 2017]
• Ghobadi.Moslem Prediction of Corrosion Rate for Carbon Steel in Soil Environment by Artificial Neural Network and Genetic Algorithm [ Vol.7, Issue 4 - Autumn Year 2019]
• Gholamzadeh.Parisa Inhibitive Assessment of N-(8-bromo-3H-phenoxazin-3-ylidene)-N,N’-Dimethylaminium, as a Novel Corrosion Inhibitor for Mild Steel in 1.0 M HCl [ Vol.2, Issue 3 - Summer Year 2014]
• Gholipoor.Alireza Effect of Milling Time on Hydrogen Desorption Properties of Nanocrystalline MgH2 [ Vol.2, Issue 3 - Summer Year 2014]
• Gholizadeh.Ahmad X-ray peak broadening analysis in LaMnO3+δ nano-particles with rhombohedral crystal structure [ Vol.3, Issue 3 - Summer Year 2015]
• Gholizadeh.Ahmad Effect of Sr substitution on structural, redox and catalytic properties of nano-particles La1-xSrxMn0.5Co0.5O3 (x = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5) as a catalyst for CO oxidation [ Vol.2, Issue 4 - Autumn Year 2014]
• ghoneim.iman Processing of aluminum flake powder via high energy ball milling under different conditions reaching to aluminum nanoparticles [ Vol.7, Issue 2 - Spring Year 2019]
• Ghorbani.zahra Investigation on High Temperature Wear Resistance of Cryotreated Hot Work Tool Steel [ Vol.7, Issue 3 - Summer Year 2019]
• Ghorbanzadeh.Milad Effects of Active Material Particles Size Distribution on the Fabrication of TiNb2O7 Electrode Used in Lithium-Ion Batteries [ Vol.9, Issue 3 - Summer Year 2021]
• Givianrad.Mohammad Hadi Fabrication of Silver Oxide and Nickel Oxide Nanoparticles by Green Synthesis Method Using Malva Sylvestris Plant Extract [ Vol.11, Issue 1 - Winter Year 2023]
• Golabgir.Mohammad Hossein The Effect of the Mg Content on Mechanosynthesis of ZrB2–SiC–ZrC Composite in the Mg/ZrSiO4/B2O3/C System [ Vol.3, Issue 2 - Spring Year 2015]
• Golestanifard.Farhad Electrochemical properties of iron oxide nanoparticles as an anode for Li-ion batteries [ Vol.3, Issue 4 - Autumn Year 2015]
• Golestanipour.Masoud Improvement Impact Manufacturing Parameteres of Aluminum Foams [ Vol.6, Issue 4 - Autumn Year 2018]
• Golmohammad.Mohammad Electrochemical properties of iron oxide nanoparticles as an anode for Li-ion batteries [ Vol.3, Issue 4 - Autumn Year 2015]
• golparvaran.saeed Plasma Influence of Surface Texture of Silicone Rubber for Biomedical Application in Scala Tympani [ Vol.9, Issue 2 - Spring Year 2021]
• Gorji.Abdolhamid Improving the surface wear resistance of aluminum by electrical discharge process [ Vol.6, Issue 2 - Spring Year 2018]
• Gorji-Bandpy.M. Solidification and thermal performance analysis of the low carbon steel during the continuous casting process [ Vol.5, Issue 3 - Summer Year 2017]
• gozalzadeh.sahel Plastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing [ Vol.4, Issue 1 - Winter Year 2016]
• Guerra.Lizangela Characterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates [ Vol.6, Issue 1 - Winter Year 2018]
• Gutierrez Martinez.Manuel Characterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates [ Vol.6, Issue 1 - Winter Year 2018]