K

• K.Bhagyasree Thermal, optical and dielectric studies of VO2+ doped Poly(vinyl chloride)(PVC) films [ Vol.5, Issue 4 - Autumn Year 2017]
• kaji.mohammadreza Numerical Analysis of Severe Plastic Deformation by High Pressure Torsion [ Vol.4, Issue 2 - Spring Year 2016]
• Kalantari.Seyed Mohammad Fabrication and characterization of the Ti-6Al-4V/Mg scaffold [ Vol.3, Issue 2 - Spring Year 2015]
• Kalantari.Seyed Mohammad Study on compressive and compatibility properties of titanium functionally graded scaffolds (FGSs) as bone replacements [ Vol.6, Issue 3 - Summer Year 2018]
• Kalantarzadeh.Fatemeh Design and Fabrication of Bone Scaffold Using Ceramic Composite Filament by 3D Printer [ Vol.10, Issue 3 - Summer Year 2022]
• Kanny.Krishnan Extraction of Hemicellulose and Lignin from Sugarcane Bagasse for Biopolymer Films: Green Process [ Vol.6, Issue 3 - Summer Year 2018]
• karamian.ebrahim Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
• karamian.Ebrahim Evolution of Biological Properties of Bioactive Diopside and Wollastonite for Bone Tissue Engineering [ Vol.10, Issue 1 - Winter Year 2022]
• karamian.Ebrahim Novel BCP-Bioactive Glass-Akermanite/PCL Composite Scaffold: Physical and Mechanical Behavior, and in Vitro Bioactivity [ Vol.8, Issue 3 - Summer Year 2020]
• Karbasi.Maryam The Effect of sintering temperature on microstructure and hardness of milled WC- 20 wt.% equiatomic (Fe,Co) cemented carbides [ Vol.3, Issue 1 - Winter Year 2015]
• Karbasi.Maryam Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling [ Vol.2, Issue 3 - Summer Year 2014]
• Karbasi.Minoo Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling [ Vol.2, Issue 3 - Summer Year 2014]
• Karbasi.Minoo The Effect of sintering temperature on microstructure and hardness of milled WC- 20 wt.% equiatomic (Fe,Co) cemented carbides [ Vol.3, Issue 1 - Winter Year 2015]
• Kardi.Hossein Recycling Evaluation of Mill Scale in Electric Arc Furnace [ Vol.2, Issue 3 - Summer Year 2014]
• Kargar Razi.M. Development and Evaluation of Nanomagnetic Carrier for the Controlled Loading and Release of Celecoxib [ Vol.10, Issue 1 - Winter Year 2022]
• Kargar.Mahboubeh Magnetic and Structural Characteristics of Fe2O3 Nanostructure Synthesized in the Presence of Sour Cherry Juice [ Vol.4, Issue 3 - Summer Year 2016]
• Karimi.Afzal Immobilization of Glucose oxidase on Meso-porous Glass-ceramic with the Skeleton of CaTi4(PO¬4)6 [ Vol.1, Issue 4 - Autumn Year 2013]
• Karimian.Majid Structural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique [ Vol.5, Issue 1 - Winter Year 2017]
• karimkhani.fahad Effect of Titania Colloid Solution Concentration on Hydrophobicity of Well-Aligned TiO2 Nanorods Synthesized via Hydrothermal Method [ Vol.2, Issue 1 - Winter Year 2014]
• Karimzadeh.Fathallah Effects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts [ Vol.4, Issue 1 - Winter Year 2016]
• Karimzadeh.Fathollah The effect of mechanical activation on the kinetic and formation mechanism of a niobium aluminide based nanocomposite [ Vol.4, Issue 3 - Summer Year 2016]
• Kasiri.Masoud GEP-based Modeling for Predicting Sponge Iron Metallization in Persian Direct Reduction (PERED) Method [ Vol.9, Issue 4 - Autumn Year 2021]
• Kasiri.Masoud Effect of Fluoride Coating on the Degradation of Mg-Based Alloy Containing Calcium for Biomedical Applications [ Vol.10, Issue 1 - Winter Year 2022]
• Kavyani.Mahdi Improvement Impact Manufacturing Parameteres of Aluminum Foams [ Vol.6, Issue 4 - Autumn Year 2018]
• Kazemi.Shahb On the fabrication and characterization of Al5083/Al2O3 surface nanocomposite via friction stir processing [ Vol.5, Issue 2 - Spring Year 2017]
• Kazemzadeh.Asghar Kinetics analysis of electrophoretic deposition using small signal and large signal modeling, Case study: Nano-Mullite suspension [ Vol.4, Issue 4 - Autumn Year 2016]
• Kazemzadeh.S. Mohammad Characterization of nanostructured SnO2 thin film coated by Ag nanoparticles [ Vol.2, Issue 2 - Spring Year 2014]
• Kazemzadeh-Parsi.Mohammad Javad New Iteration based Algorithm for Shape Optimization of Internal and External Boundaries of the Initial Blank in the Deep Drawing Process [ Vol.8, Issue 3 - Summer Year 2020]
• Kelishadi.Mohammad Reza A Kinetic Study of Vanadium Dissolution During Acetic Acid Leaching of Steel Making Converter Slag [ Vol.8, Issue 4 - Autumn Year 2020]
• Keshavarz.Saeed Isothermal and cyclic oxidation behavior of AISI 430 ferritic stainless steel coated with titanium [ Vol.6, Issue 2 - Spring Year 2018]
• Keshtiban.Peyman Optimization of ECMAP parameters in production of ultra-fine grained Al1050 strips using Grey relational analysis [ Vol.3, Issue 4 - Autumn Year 2015]
• Keshtiban.Peyman Modeling and production of high strength Al strips by equal channel multi angular pressing method [ Vol.3, Issue 4 - Autumn Year 2015]
• khademinia.shahin Bismuth Pyromangenate: Hydrothermal and Solid State Synthesis, Characterization and Optical Properties [ Vol.3, Issue 1 - Winter Year 2015]
• khademinia.shahin Photocatalytic degradation of Malachite Green by Sr3MxAl2O6+δ ﴾M=None, Sm3+, Eu3+, Ho3+ and Yb3+) nanomaterial as an excellent and recyclable photocatalyst [ Vol.8, Issue 1 - Winter Year 2020]
• Khaghani.Masoumeh Reinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber [ Vol.4, Issue 3 - Summer Year 2016]
• Khaleghifar.Mohammad Hossein Investigation of mechanical properties and fracture surfaces of 5086 Al-based alloy processed by equal channel angular pressing in different routes [ Vol.5, Issue 4 - Autumn Year 2017]
• Khalvan.Mohammad Mehdi Semiconducting properties of passive films formed on AISI 420 stainless steel in nitric acid solutions [ Vol.1, Issue 4 - Autumn Year 2013]
• Khameneh Asl.Shahin Mechanical Alloying and Spark Plasma Sintering of Equiatomic AlCoCrFeMnNi High Entropy Alloy [ Vol.10, Issue 1 - Winter Year 2022]
• Khandan.Amirsalar Fabrication of polycaprolactone and polylactic acid shapeless scaffolds via fused deposition modelling technology [ Vol.7, Issue 4 - Autumn Year 2019]
• Khayatian.Ali Investigating structural, optical and photocatalytic properties of hydrothermally synthesized ZnO nanorod arrays with various aspect ratios [ Vol.3, Issue 4 - Autumn Year 2015]
• Khoda Bande Dastjerdi.Ehsan CORROSION BEHAVIOR OF BIOACTIVATED TITANIUM DENTAL IMPLANT USING DIFFERENT CHEMICAL METHODS [ Vol.6, Issue 1 - Winter Year 2018]
• khodaei.Milad Evaluation of GMAW Welded Joints in A36 Low-Alloy Marine Steel Sheets: Tensile Test, Hardness, and Fatigue Properties [ Vol.10, Issue 4 - Autumn Year 2022]
• khodai.mohammad Improving the Properties of the Porous Polylactic Acid Scaffold by Akermanite Nanoparticles for Bone Tissue Engineering [ Vol.8, Issue 2 - Spring Year 2020]
• khodai.mohammad CORROSION BEHAVIOR OF BIOACTIVATED TITANIUM DENTAL IMPLANT USING DIFFERENT CHEMICAL METHODS [ Vol.6, Issue 1 - Winter Year 2018]
• khodai.mohammad Hydroxyapatite Nano-Particles Extracted from Miscellaneous Bestial Resources: Study of Crystal Structure and Microstructure [ Vol.8, Issue 3 - Summer Year 2020]
• Khoeini.Mahdi Effect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites [ Vol.6, Issue 2 - Spring Year 2018]
• khoran.Eisa Effect of CTAB surfactant on microstructure and oxidation behavior of Ni-TiO2 Composite coating [ Vol.6, Issue 4 - Autumn Year 2018]
• Khorasani.Mohammad T. Preparation and Determination of the Characteristics of Hydrogel Membrane of Poly-Vinyl Alchol, Starch and Chitosan [ Vol.9, Issue 1 - Winter Year 2021]
• Khorasani.Mohammad T. Plasma Influence of Surface Texture of Silicone Rubber for Biomedical Application in Scala Tympani [ Vol.9, Issue 2 - Spring Year 2021]
• Kolahan.Farhad Simultaneously Modeling and Optimization of Heat Affected Zone and Tensile Strength in GTAW Process Using Simulated Annealing Algorithm [ Vol.9, Issue 2 - Spring Year 2021]
• Kolahan.Farhad Using design of experiments approach and simulated annealing algorithm for modeling and Optimization of EDM process parameters [ Vol.6, Issue 3 - Summer Year 2018]
• Koupaei.Narjes Fabrication of Na-W Co-Doped Exfoliated G-C3N4 Nanoparticles for Methylene Blue Removal [ Vol.10, Issue 4 - Autumn Year 2022]
• Kristiani.Anis Synthesis of the Nano structured Zinc Oxide Using the Soft template of Cylea barbata miers Extract and its Promising Property for Dye Adsorbent [ Vol.3, Issue 1 - Winter Year 2015]