List of Articles analysis

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Interpretive Structural Modeling (ISM) of Intellectual Capital Components
  Mohammad Saleh Owlia Kosar Roshani Mohammad Hossein Abooei
  10.30495/jiei.2020.678786
  20.1001.1.17355702.2020.16.4.4.3
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Steel Supply Chain Complexity and Resilience Assessment: Interactive Network Mapping, Graph Theory, and Agent-Based Simulation
  Mohammad Hossein Sadat Hosseini Khajouei Nazanin Pilevari Reza Radfar Ali Mohtashami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - A new control chart based on discriminant analysis for simple linear profiles monitoring
  Mona Ayoubi Negin Khaksari
  10.30495/jiei.2020.679269
  20.1001.1.17355702.2020.16.4.7.6
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Reliability Analysis of Distributed System for Enhancing Data Replication using Gumbel-Hougaard Family Copula Approach Joint Probability Distribution
  Ibrahim Yusuf Abdulkareem Ismail Nasir Sufi Faruku Ambursa Abdullahi Sanusi Muhammad Isa
  10.30495/jiei.2021.1944531.1177
  20.1001.1.17355702.2021.17.3.5.9
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Evaluation of research performance of faculty members of Islamic Azad University, using Fuzzy Delphi method
  Amir Khalili Fereshteh Kordestani Yalda Delgoshaei Ali Hosseini Khah
  10.30495/jiei.2021.1937412.1149
  20.1001.1.17355702.2021.17.4.2.8
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Development of Clustering Technique and Genetic Algorithm to Monitor Multivariate Descriptive Processes based on Large-scale Nominal Contingency Tables (Case Study: Renewable Energy Process )
  Yaser Vahedi Geshniani Bijan Rahmani Reza Kamranrad
  10.30495/jiei.2023.1952689.1206
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Development of Main Success Factors in Technology Transfer: An Empirical Study of Iranian Oil Industry
  Matin Milani Tabrizi Akbar Alemtabriz Mohammad Fallah Hamed Kazemipoor
  10.30495/jiei.2022.1967844.1250
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Characterizing a Subset of the PPS with Radial Projection Point on a Prespecified Hyperplane
  Najmeh Malekmohammadi Amin Mostafaee
  10.30495/jiei.2022.1945972.1184
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Performance assessment of a complex repairable system with k-out-of-n: G operational scheme and copula repair approach
  Dhruv Raghav Suresh Sahani Vijay Singh Shakeeludeen Chaudhary
  10.30495/jiei.2023.1953669.1210
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Inventory Management of Automotive Industries using ABC Analysis: A Systematic Approach
  Gireesh Kumar Rajat Nebhnani Richa Sharma
  10.30495/jiei.2023.1954649.1212
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Assessing the reliability of dynamic systems for safety units recovering flare gas, considering covariates
  Abolghasem Nobakhti Sadigh Raissi Kaveh Khalili Damghani Roya Soltani
  10.30495/jiei.2023.1989424.1312
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Improving discrimination power based on reducing dispersion of weights in data envelopment analysis
  Yousef Badraghi Shokrollah Ziari Naghi Shoja Amir Gholam Abri
  10.30495/jiei.2023.1938148.1153
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Performance of Cluster-Based Logistic Profile Monitoring Under Existence of Different Linkage Functions
  Davood Saremian Rasool Noorossana Sadigh Raissi Paria Soleimani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - A multi-objective model for closed-loop supply chain optimization and efficient supplier selection in a competitive environment considering quantity discount policy
  Mustafa Jahangoshai Rezaee Samuel Yousefi Jamileh Hayati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Customer Behavior Mining Framework (CBMF) using clustering and classification techniques
  Farshid Abdi Shaghayegh Abolmakarem
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Application of orthogonal array technique and particle swarm optimization approach in surface roughness modification when face milling AISI1045 steel parts
  Masoud Azadi Moghaddam Farhad Kolahan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Modeling and development of a decision support system for supplier selection in the process industry
  Pandian Pitchipoo Ponnusamy Venkumar Sivaprakasam Rajakarunakaran
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - A DMAIC approach for process capability improvement an engine crankshaft manufacturing process
  G. V. S. S. Sharma P. Srinivasa Rao
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Ranking efficient DMUs using minimizing distance in DEA
  Shokrollah Ziari Sadigh Raissi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Optimisation of wire-cut EDM process parameter by Grey-based response surface methodology
  Amit Kumar Tarun Soota Jitendra Kumar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Combining data envelopment analysis and multi-objective model for the efficient facility location–allocation decision
  Jae-Dong Hong Ki‑Young Jeong
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Phase II monitoring of multivariate simple linear profiles with estimated parameters
  Ahmad Ahmadi Yazdi Ali Zeinal Hamadani Amirhossein Amiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - A Taguchi approach on optimal process control parameters for HDPE pipe extrusion process
  G. V. S. S . Sharma R. Umamaheswara Rao P. Srinivasa Rao
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Shapley value-based multi-objective data envelopment analysis application for assessing academic efficiency of university departments
  Stephen Lloyd N. Abing Mercie Grace L. Barton Michael Gerard M. Dumdum Miriam F. Bongo Lanndon A. Ocampo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Examining significant factors in micro and small enterprises performance: case study in Amhara region, Ethiopia
  Tomas Cherkos Muluken Zegeye Shimelis Tilahun Muralidhar Avvari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Development of a cell formation heuristic by considering realistic data using principal component analysis and Taguchi’s method
  Shailendra Kumar Rajiv Kumar Sharma
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Combination of real options and game-theoretic approach in investment analysis
  Abdollah Arasteh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Scaling production and improving efficiency in DEA: an interactive approach
  Wilhelm Ro¨dder Andreas Kleine Andreas Dellnitz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Impact of information technology on productivity and efficiency in Iranian manufacturing industries
  Amir Gholam Abri Mahmoud Mahmoudzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Network DEA: an application to analysis of academic performance
  Mohammad Ali Saniee Monfared Mahsa Safi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Analysis of two production inventory systems with buffer, retrials and different production rates
  K. P. Jose Salini S. Nair
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Assessment of distance-based multi-attribute group decision-making methods from a maintenance strategy perspective
  Siew-Hong Ding Shahrul Kamaruddin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Reliability analysis of repairable systems using system dynamics modeling and simulation
  M. Srinivasa Rao V. N. A. Naikan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - An integrated data envelopment analysis–artificial neural network approach for benchmarking of bank branches
  Elsa Shokrollahpour Farhad Hosseinzadeh Lotfi Mostafa Zandieh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - An investigation of model selection criteria for technical analysis of moving average
  Milad Jasemi Ali M Kimiagari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Analysis of critical drivers affecting implementation of agent technology in a manufacturing system
  Om Ji Shukla Abhijeet Joshi Gunjan Soni Rajesh Kumar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - An automated time and hand motion analysis based on planar motion capture extended to a virtual environment
  Hector A. Tinoco Alex M. Ovalle Carlos A. Vargas Marı´a J. Cardona
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - A hybrid DEA-based K-means and invasive weed optimization for facility location problem
  Farshad Faezy Razi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - A neuro-data envelopment analysis approach for optimization of uncorrelated multiple response problems with smaller the better type controllable factors
  Mahdi Bashiri Amir Farshbaf-Geranmayeh Hamed Mogouie
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Finding stability regions for preserving efficiency classification of variable returns to scale technology in data envelopment analysis
  P . Zamani M . Borzouei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - A fuzzy model for achieving lean attributes for competitive advantages development using AHP-QFD-PROMETHEE
  E. Roghanian Mohammad Alipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Robust DEA under discrete uncertain data: a case study of Iranian electricity distribution companies
  Ashkan Hafezalkotob Elham Haji-Sami Hashem Omrani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Reliability analysis of a robotic system using hybridized technique
  Naveen Kumar Komal Komal J. S. Lather
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Cost analysis of a coal-fired power plant using the NPV method
  Ravinder Kumar Avdhesh Kr. Sharma P. C. Tewari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Finding efficient frontier of process parameters for plastic injection molding
  Wu-Lin Chen Chin-Yin Huang Ching-Ya Huang
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Quantitative risk management in gas injection project: a case study from Oman oil and gas industry
  Mohammad Miftaur Rahman Khan Khadem Sujan Piya Ahm Shamsuzzoha
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - An application of principal component analysis and logistic regression to facilitate production scheduling decision support system: an automotive industry case
  Saeed Mehrjoo Mahdi Bashiri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Customer involvement in greening the supply chain: an interpretive structural modeling methodology
  Sanjay Kumar Sunil Luthra Abid Haleem
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Process capability improvement of an engine connecting rod machining process
  GVSS Sharma P Srinivasa Rao
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Forecasting S&P 500 index using artificial neural networks and design of experiments
  Seyed Taghi Akhavan Niaki Saeid Hoseinzade
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - An empirical study of innovation-performance linkage in the paper industry
  Parveen Farooquie Abdul Gani Arsalanullah K Zuberi Imran Hashmi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - A study of operators’ computing efficiency with special focus on the readability under different viewing angles of a desktop
  Z. Maillck Mohammad Asjad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Data envelopment analysis in service quality evaluation: an empirical study
  Seyedvahid Najafi Saber Saati Madjid Tavana
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory
  Reza Tavakkoli-Moghaddam Rajesh Khanna Anish Kumar Mohinder Pal Garg Ajit Singh Neeraj Sharma
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Multi-objective optimization in WEDM of D3 tool steel using integrated approach of Taguchi method & Grey relational analysis
  Anand S. Shivade Vasudev D. Shinde
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Multi-period project portfolio selection under risk considerations and stochastic income
  Ali Asghar Tofighian Hamid Moezzi Morteza Khakzar Barfuei Mahmood Shafiee
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - An alternative transformation in ranking using l1-norm in data envelopment analysis
  S. Ziari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Process capability improvement through DMAIC for aluminum alloy wheel machining
  G. V. S . S. Sharma P. Srinivasa Rao B. Surendra Babu
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - A novel risk-based analysis for the production system under epistemic uncertainty
  Mehran Khalaj Fereshteh Khalaj Amineh Khalaj
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Evaluation and selection of sustainable suppliers in supply chain using new GP-DEA model with imprecise data
  Saeid Jafarzadeh Ghoushchi Mehran Dodkanloi Milan Mustafa Jahangoshai Rezaee
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - A new adaptive exponential smoothing method for non-stationary time series with level shifts
  Mohammad Ali Saniee Monfared Razieh Ghandali Maryam Esmaeili
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - A full ranking method using integrated DEA models and its application to modify GA for finding Pareto optimal solution of MOP problem
  S Razavyan GH Tohidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - A novel three-stage distance-based consensus ranking method
  Nazila Aghayi Madjid Tavana
  20.1001.1.17355702.2020.16.1.2.5
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Fuzzy model for risk analysis
  F Luban
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Maintenance management decision model for preventive maintenance strategy on production equipment
  R Ahmad S Kamaruddin I Azid I Almanar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - A profit Malmquist productivity index
  GH Tohidi SH Razavyan S Tohidnia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Non-discretionary imprecise data in efficiency Measurement
  S Razavyan G Tohidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Determining a common set of weights in DEA by solving a linear programming
  S Saati
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Evaluation of scheduling solutions in parallel processing using DEA FDH model
  GH.R Amin M.S Hosseini Shirvani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - A new approach to determine efficient DMUs in DEA models using inverse optimization
  GH.R Amin
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Determination constructs validity of an agile organization model by using factor analysis
  A N. Mashayekhi A Toloie Eshlaghy A Rajabzadeh M.M Razavian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Analysis of motor fan radiated sound and vibration waveform by automatic pattern recognition technique using “Mahalanobis distance”
  Eiji Toma
  20.1001.1.17355702.2020.16.1.7.0
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - Completion of the paper “Ranking Efficient DMUs based on single virtual inefficient DMU in DEA”
  AmirReza Hassani Tabatabaee Amir Gholam Abri Shokrollah Ziari ebrahim niknaghsh