List of Articles Finite Element

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Simulation of Ultrasonic Welding of Al-Cu Dissimilar Metals for Battery Joining
  Reza Abdi Behnagh Peyman Esmaeilzadeh Mohsen Agha Mohammad Pour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Evaluating the Effect of Operating Conditions on Temperature Variation Rate of Inner Walls and Inside Inflated Air of Pneumatic Tires
  Moslem Namjoo Hossein Golbakhshi Farhad Khoshnam Ahmad Soleimani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Modelling of Non-Uniform Piezoelectric Micro-Cantilever in Different Environments
  Mitra Taghizade A. H. Korayem M. H. Korayem
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Stress and Displacement Analysis of First Molar Hollow Tooth during Dental Filling Operation using Three-Dimensional Finite Element Method
  M. R. Karamooz-Ravari B. Shahriari E. Seyfali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Optimization of the Forging Process of a Gas Turbine Blade using the Finite Element Analysis and Response Surface Method
  V. Alimirzaloo F. R. Biglari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Numerical Simulation of Fluid-Structure Interaction and its Application in Impact of Low-Velocity Projectiles with Water Surface
  N. Khazraiyan N. Dashtian Gerami M. Damircheli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Experimental and Numerical Analysis of Titanium/HA FGM for Dental Implantation
  Sina Sazesh Aazam Ghassemi Reza Ebrahimi Mohammad Khodaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - Behavior Analysis of Cold Expanded-Bolt Clamped AL2024-T3 Plate
  M. Sayah Badkhor A. R. Naddaf Oskouei* H. Mohammadi Hooyeh F. Shirbakht
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Process Parameters Optimization in Gas Blow Forming of Pin-type Metal Bipolar Plates using Taguchi and Finite Element Methods
  M. Moradian A. Doniavi V. Modanloo V. Alimirzaloo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Multi layered finite element analysis of graded coatings in frictional rolling contact
  R. Jahedi S. Adibnazari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock
  N. Nayebpashaee H. Vafaeenezhad S. M. M. Hadavi S. H. Seyedein M. R. Aboutalebi H. Sarpoolaky
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Developing a control strategy for AFM nano- micro manipulation
  H. RaeisiFard A. K. Hoshiar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Characterization of Stress Concentration in Thin Cylindrical Shells with Rectangular Cutout Under Axial Pressure
  O. Sam Daliri M. Farahani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Investigation on Stress Distribution of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes in Thermal Environment
  Mohammad morad Sheikhi Hamidreza Shamsolhoseinian Rasool Moradi dastjerdi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Numerical Analysis of Circular Pre-notched U-Channel Section Distortions in Cold Roll-Forming Process
  S. Sattar S. Mazdak E. Sharifi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Experimental and Numerical Investigation of the Arms Displacement in a New Electrothermal MEMS Actuator
  M. Kolahdoozan A. Rouhani Esfahani M. Hassani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Experimental Study and Finite Element Simulation of Residual Stress in Welded Sections of Steel P91 Pipes with Multi-pass Welding
  Davood Azadi Nosratollah Solhjoei SayedAli Mousavi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Application of Topology Optimization in Design of Stem Profile in Hip Implants Using Finite Element Method
  Mohammad Reza Niroomand Farzad Boroomand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Steady State Creep Characteristics of a Ferritic Steel at Elevated Temperature: An Experimental and Numerical Study
  Roozbeh Alipour Ali Farokhi Nejad Hamid Nilsaz Dezfouli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Multi-Objective Optimization of Loading Paths for Double-Layered Tube Hydroforming using Finite Element Analysis
  Hamed Ebrahimi Keshmarzi Ramin Hashemi Reza Madoliat
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Numerical simulation of multilayer cellular scaffolds with 3D and 1D elements
  Hamid Reza khanaki Sadegh Rahmati Mohammad Nikkhoo Mohammad Haghpanahi Javad Akbari
  10.30495/admt.2020.1905314.1207
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Numerical Simulation of Ultrasonic Assisted Indentation Tube Forming
  Saeid Dashti Masih Paknejad Amir Abdullah Abbas Pak
  10.30495/admt.2020.1869462.1124
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - The Numerical Modeling to Study the Multi-Pass Friction Stir Processing on Magnesium Casting Alloy AZ91
  hoda agha amini fashami Mohammad Hoseinpour Gollo Nasrollah Bani Mostafa Arab Bahram Nami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone
  Sayed Alireza Hashemi Saeid Esmaeili Mazyar Ghadirinejad Saeed Saber-Samandari Erfan Sheikhbahaei Alireza Kordjamshidi Amirsalar Khandan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Influences of Blank Holder Force in The Multi-Step Deep Drawing Process of Aluminum Sheets
  Sajad Bakhtiari Seyed Jalal Hashemi Amir Hossein Roohi
  10.30495/admt.2020.1880364.1147
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Investigation on Failure Loads and Failure Modes for Two Parallel Pin-Loaded Holes Made from Unidirectional Glass-Epoxy Nanoclay Laminates
  sajjad dehghanpour keivan hosseini safari Farzan Barati Mohammadmahdi Attar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Dynamic Analysis of Carbon Nanotube-Reinforced Multilayer Composite Plates
  Jamshid Ebrahimi Jafar Eskandari Jam Reza Azarafza Mohsen Heydari Beni Majid Eskandari Shahraki
  10.30495/admt.2021.1905074.1206
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Analytical and Numerical Study of Pre-Stress Effect in Piezoelectric Sandwich Type Ultrasonic Transducer
  Hamidreza Nadri Mahdi Shaban Abbas Pak
  10.30495/admt.2021.1904847.1204
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Weld Distortion and Residual Stresses in Aluminum Hollow Section T-Joint
  Asghar Mahdian Arash Babamiri Behrooz Shahriari
  10.30486/admt.2022.1934601.1296
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Numerical and Experimental Static Bending Analysis of Composite Sandwich Panels with Grid-Stiffened Cores Before and After Transverse Impact Loading
  Ali Asghar Davoodabadi Ali Davar Mohsen Heydari Beni Jafar Eskandari Jam
  10.30486/admt.2021.1904974.1208
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Investigation of In-Situ Compressive Strength of Fiber-Reinforced Mortar and the Effect of Fibers on the Adhesion of Mortar/Steel
  Ali Saberi Varzaneh Mahmood Naderi
  10.30495/admt.2021.1909271.1218
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - The Effect of Boundary Conditions and Concentrated Mass on The Performance and Vibration Results of Piezoelectric Bimorph Beam by Parallel and Series Layers
  majid jabbari Sofia  Jabbari
  10.30486/ADMT.2024.873703
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Simulation and Dynamic-Thermal Analysis of Ceramic Disc and Brake Pad for Optimization by Finite Element Method
  Navvab Gholami Ahmad Afsari Seyed Mohammad Reza Nazemosadat Mohammad Javad Afsari
  10.30486/ADMT.2024.1980467.1402
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Different Geometry Design Structures of Tissue Scaffolds for Additive Manufacturing
  amirhossein Ehsani sadegh rahmati Mohammad Nikkhoo Shahram Etemadi Haghighi Mohammad Haghpanahi
  10.30495/admt.2021.1936526.1298
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Numerical Simulation of Hot Forging Process of KIA Car Brake’s Output Shaft
  saeid Hashemian Peyman Mashhadi Keshtiban Abuzar Es'haghi Oskui
  10.30486/admt.2022.1933346.1290
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Evaluation of Critical Buckling Load in FG Plate using Analytical and Finite Elements Methods
  Hossein Ahmadi Rashid AMIR GHIASVAND Maziar Mahdipour Jalilian Mahdi Kazemi
  10.30486/admt.2022.1904716.1203
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Numerical and Experimental Investigation of Natural Frequency and Damping Coefficient of Flexible Cellular Lattice Structures
  Amir Hosein Samimi M. R. Karamooz-Ravari Reza Dehghani
  10.30486/ADMT.1403.873757
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Finite Element Analysis of the Impact Behavior of Sandwich Panels with Nanocomposite Face sheet (Epoxy/ Fiberglass/Nanosilica)
  Arash Azadi Mahdi Karami Khorramabadi Maziar Mahdipour Jalilian
  10.30486/admt.2023.1957517.1349