-
دسترسی آزاد مقاله
1 - پیوستگی ضربگرهای تقریبی روی جبرهای باناخ
محمد رضا امیدی عباس زیوری کاظم پور اباصلت بداغیدراین مقاله ثابت میکنیم که هر ضربگر روی جبر باناخ بدون مرتبه A همریختی تقریبی است. همچنین پیوستگی ضربگرهای تقریبی را بررسی و تحت شرایط خاص نشان میدهیم که هر ضربگر تقریبی T:A⟶A پیوسته است.دراین مقاله ثابت میکنیم که هر ضربگر روی جبر باناخ بدون مرتبه A همریختی تقریبی است. همچنین پیوستگی ضربگرهای تقریبی را بررسی و تحت شرایط خاص نشان میدهیم که هر ضربگر تقریبی T:A⟶A پیوسته است. پرونده مقاله -
دسترسی آزاد مقاله
2 - K -قاب از ضربگرها در فضاهای-C*-pro مدول هیلبرتی
مونا نارویی ایرانی اکبر نظری‎‎چکیده‎‎ گاوارتا برای مطالعهی سیستمهای اتمی که اولین بار توسط فیشتینگر و همکارانش معرفی شده بود، K-قابها روی فضاهای هیلبرت را ارائه کرد. K-قابها نوعی از قابها هستند، که کران پایین آنها فقط برای عناصر برد عملگر خطی کراندار K در فضای هیلبرت برقرار اس چکیده کامل‎‎چکیده‎‎ گاوارتا برای مطالعهی سیستمهای اتمی که اولین بار توسط فیشتینگر و همکارانش معرفی شده بود، K-قابها روی فضاهای هیلبرت را ارائه کرد. K-قابها نوعی از قابها هستند، که کران پایین آنها فقط برای عناصر برد عملگر خطی کراندار K در فضای هیلبرت برقرار است. C* جبری که توپولوژی آن به جای یک C*-نرم توسط خانوادهای از C*-نیمنرمهای پیوسته القا شود -‎C*-proجبر مینامند. فضاهای C*-pro-مدول هیلبرتی تعمیمی از فضاهای هیلبرت است، هرگاه ضرب داخلی مقادیر بیشتری را از اعداد مختلط، یعنی مقادیری از C*-pro-جبر اختیار کند. در این مقاله دنبالهای که عناصر آن عملگرهای الحاقپذیر از -‎C*-proجبر به فضای ‎C*-pro -مدول هیلبرتی است، را دنباله ضربگرها مینامیم. مفهوم سیستمهای اتمی و K-قاب از ضربگرها ‏در فضاهای -‎C*-pro ‎مدول هیلبرتی را معرفی ‏ میکنیم و برای تفهیم بیشتر مثالی از K-قابها را ارائه میدهیم. شرطی که دنبالهای از ضربگرها قاب باشد، را بهدست میآوریم و ارتباط سیستمهای اتمی و K-قابها با یکدیگر و قاب از ضربگرها را بررسی میکنیم. اگر K عملگری کراندار با شرایطی خاص باشد هر K-قاب یک قاب از ضربگرها در فضای C*-pro-مدول هیلبرتی است. همچنین برخی خواص این مفاهیم مانند ترکیب عملگرها با K-قابها در فضای C*-pro-مدول هیلبرتی را تحقیق میکنیم. پرونده مقاله -
دسترسی آزاد مقاله
3 - خاصیتِ بی.اس.ایی.ِ تکمیلِ جبر فوریه در فضای ضربگرهایش
محمد فزونیبرای گروه موضعاً فشردهی G، فرض کنیم A(G) جبر فوریه و A_M (G) نشاندهندهی تکمیل این جبر در فضای ضربگرهایش است. در این مقاله نشان میدهیم که A(G) یک جبرِ سگالِ مجرد در A_M (G) است. سپس یک شرط لازم و کافی برای تساوی دو جبر A(G) و A_M (G) را ارائه میدهیم. همچنین ثابت م چکیده کاملبرای گروه موضعاً فشردهی G، فرض کنیم A(G) جبر فوریه و A_M (G) نشاندهندهی تکمیل این جبر در فضای ضربگرهایش است. در این مقاله نشان میدهیم که A(G) یک جبرِ سگالِ مجرد در A_M (G) است. سپس یک شرط لازم و کافی برای تساوی دو جبر A(G) و A_M (G) را ارائه میدهیم. همچنین ثابت میکنیم که A_M (G) یک ایدهال در دوگان دومش است اگروتنهااگر G گسسته باشد. نشان خواهیم داد که اگر G یک گروه گسسته باشد، آنگاه A_M (G) یک جبر بی.اس.ایی. است اگروتنهااگر G، M-میانگینپذیر ضعیف باشد. بهعنوان یک نتیجه ثابت خواهد شد که A_M (F_2 ) برخلاف A(F_2 ) یک جبر بی.اس.ایی. است. در پایان مطالعهی مشابهی روی جبر لبگ-فوریه انجام میشود و همچنین یک اثبات کاملاً جدید از تساوی فضای کاراکتری جبر فوریه و تکمیل شدهاش ارائه میگردد که مبتنی بر خواص ضربگرهاست. کلمات کلیدی: جبر باناخ، جبر فوریه، فضای ضربگر، خاصیت بی.اس.ایی.، گروه موضعاً فشرده. پرونده مقاله -
دسترسی آزاد مقاله
4 - ضربگرها و کاربرد آنها در مهندسی زلزله
مرجان ادیبدر این مقاله به مطالعه ضربگرها روی جبرهای باناخ پرداخته و در این راستا نتایج جدیدی چون ارتباط میانگین پذیری و منظم آرنز بودن جبر ضربگرها را با جبر باناخ اولیه بیان می­کنیم. همچنین ارتباط میان ضربگرهای جردن و ضربگرها را بیان و تلاش می­شود که با ارائه یک مثال به ت چکیده کاملدر این مقاله به مطالعه ضربگرها روی جبرهای باناخ پرداخته و در این راستا نتایج جدیدی چون ارتباط میانگین پذیری و منظم آرنز بودن جبر ضربگرها را با جبر باناخ اولیه بیان می­کنیم. همچنین ارتباط میان ضربگرهای جردن و ضربگرها را بیان و تلاش می­شود که با ارائه یک مثال به تبیین نتیجه بدست آمده بپردازیم. در آخر، با استفاده از قضیه 2، کاربرد ضربگرها را در تئوری سیگنال­ها و مهندسی زلزله بررسی می­کنیم. پرونده مقاله -
دسترسی آزاد مقاله
5 - Evaluating Efficiency by Multiplier Method in Two-Stage Unit with Undesirable Outputs
Sepideh VataniData Envelopment Analysis (DEA) is a linear programming based method to measure performance a group of homogeneous decision making units (DMUs) units such as firms with multiple inputs and outputs. In two-stage unit all or part of the outputs of the first stage are assu چکیده کاملData Envelopment Analysis (DEA) is a linear programming based method to measure performance a group of homogeneous decision making units (DMUs) units such as firms with multiple inputs and outputs. In two-stage unit all or part of the outputs of the first stage are assumed to be the second stage's inputs and measuring performance of these DMUs is one of the important issues in DEA. There are two ways, multiplier or additive model, to calculate efficiency of DMU in DEA which in this paper, a new model is proposed by using multiplier method to evaluate efficiency of such unit then according to the presented model, the efficiency of a hose and plastic product manufacturer in 10 years is examined. پرونده مقاله -
دسترسی آزاد مقاله
6 - Bessel multipliers on the tensor product of Hilbert $C^\ast-$ modules
M. Mirzaee ‎AzandaryaniIn this paper, we first show that the tensor product of a finite number of standard g-frames (resp. fusion frames, frames) is a standard g-frame (resp. fusion frame, frame) for the tensor product of Hilbert $C^\ast-$ modules and vice versa, then we consider tensor produ چکیده کاملIn this paper, we first show that the tensor product of a finite number of standard g-frames (resp. fusion frames, frames) is a standard g-frame (resp. fusion frame, frame) for the tensor product of Hilbert $C^\ast-$ modules and vice versa, then we consider tensor products of g-Bessel multipliers, Bessel multipliers and Bessel fusion multipliers in Hilbert $C^\ast-$modules. Moreover, we obtain some results for the tensor product of duals using Bessel ‎multipliers.‎ پرونده مقاله -
دسترسی آزاد مقاله
7 - On solving ordinary differential equations of the first order by updating the Lagrange multiplier in variational iteration method
SH. JavadiIn this paper, we have proposed a new iterative method for finding the solution of ordinary differential equations of the first order. In this method we have extended the idea of variational iteration method by changing the general Lagrange multiplier which is defined i چکیده کاملIn this paper, we have proposed a new iterative method for finding the solution of ordinary differential equations of the first order. In this method we have extended the idea of variational iteration method by changing the general Lagrange multiplier which is defined in the context of the variational iteration method.This causes the convergent rate of the method increased compared with the variational iteration method. To prevent consuming large amount of the CPU time and computer memory and to control requires significant amounts of computations, the Taylor expansion of the iterative functions in each iteration are applied. Finally to extend the convergence region of the truncated series, also the Pade approximants are used. Error analysis and convergence of the method are studied. Some examples are given to illustrate the performance and efficiency of the proposed method. For comparison, the results obtained by the our method and the variational iteration method are ‎presented. پرونده مقاله -
دسترسی آزاد مقاله
8 - یک مبدل کسینوسی گسسته بدون ضرب کننده با استفاده از گیت اکثریت و جمع کننده تقریبی
الهام اسماعیلی فرشاد پسران نبی اله شیریاین مقاله یک جمعکننده کامل جدید را با استفاده از محاسبات تقریبی بر اساس مفهوم منطق اکثریت (ML) پیشنهاد میکند. مفهوم ML به دلیل مشخصات منحصر به فرد خود برای استفاده در متدولوژی های مختلف بسیار کارآمد و قابل استفاده است و ساختار بنیادی آن گیت های اکثریت 3 ورودی است به ط چکیده کاملاین مقاله یک جمعکننده کامل جدید را با استفاده از محاسبات تقریبی بر اساس مفهوم منطق اکثریت (ML) پیشنهاد میکند. مفهوم ML به دلیل مشخصات منحصر به فرد خود برای استفاده در متدولوژی های مختلف بسیار کارآمد و قابل استفاده است و ساختار بنیادی آن گیت های اکثریت 3 ورودی است به طور گسترده در سلول های حساب دیجیتال استفاده شده است. جمعکننده پیشنهادی مبتنی بر ML با توان کم، تأخیر کم و محصول تأخیر کم توان (PDP) کار می کند. فناوری ترانزیستور اثر میدانی نانولوله کربنی (CNTFET) توان FA را کاهش میدهد و مشکل نوسان با تکنیک آستانه دینامیکی (DT) حل میشود. مدار پیشنهادی با دو پیکربندی جمع کننده کامل تقریبی مقایسه شده است. معماری های مورد نظر با استفاده از معیارهای سخت افزاری از جمله تاخیر، توان، PDP و میانگین فاصله خطای نرمال شده (MNED) علاوه بر معیارهای خطا ارزیابی می شوند. در مقایسه با ادبیات، طرح پیشنهادی عملکرد برتری دارد. علاوه بر این، FA پیشنهادی در طراحی تبدیل کسینوس گسسته بدون ضرب (DCT) تعبیه شده است، که یک مدار مناسب برای سیستمهای ادغام در مقیاس بسیار بزرگ (VLSI) و پردازندههای سیگنال دیجیتال (DSPs) است. نتایج اجرای DCT کارایی FA پیشنهادی را تایید می کند. پرونده مقاله -
دسترسی آزاد مقاله
9 - آنالیز و برررسی ضرب کننده های آنالوگ چهار ربعی مد جریانی از نظر خطی بودن و اعوجاج هارمونیک کلی
حمید باشی سید علی حسینی ابوالفضل امیریضرب آنالوگ دو سیگنال یکی از مهمترین کاربردها در پردازش سیگنال است. انگیزه اصلی برای انتخاب ضرب کننده ی جریانی آنالوگ اهمیتش در کارکرد پردازش سیگنال آنالوگ غیر خطی است . ضرب کننده به عنوان عنصر برنامه ریز در سیستمهایی همچون فیلترها ,شبکه های عصبی , و به عنوان میکسر ها و چکیده کاملضرب آنالوگ دو سیگنال یکی از مهمترین کاربردها در پردازش سیگنال است. انگیزه اصلی برای انتخاب ضرب کننده ی جریانی آنالوگ اهمیتش در کارکرد پردازش سیگنال آنالوگ غیر خطی است . ضرب کننده به عنوان عنصر برنامه ریز در سیستمهایی همچون فیلترها ,شبکه های عصبی , و به عنوان میکسر ها و مدلاتورها در یک سیستم مخابراتی استفاده می شود. و کاربرد وسیعی در فیلتر های وقفی مدولاسیون تبدیل فرکانس کنترل بهره خودکار سیستم های مجتمع فازی و غیره دارند.ضرب چهار ربعی دارای عملکرد غیر خطی در پردازش سیگنال هستند که برای تجهیزات ارتباطات و سیستم های کنترل بسیار مفید می باشندوفن آوری CMOS به طور گسترده ای به عنوان مطلوب ترین تکنولوژی برای پیاده سازی مدارهای مجتمع به رسمیت شناخته شده است.بنابراین مقایسه و بررسی ضرب کننده های چهار ربعی جریانی از نظرتوان مصرفی، اعوجاج هارمونیک کلTHD ، پاسخ فرکانسی، خطی بودن, سرعت،محدوده ولتاژ ورودی ، محدوده جریان ورودی ، نویز، منبع تغذیه و سایر پارامتر های تاثیر گذار بر مدار های ضرب کننده های چهار ربعی جریانی جهت دستیابی به ضرب کننده با عملکرد مناسب واستفاده در کاربرد های خاص ضروری است. پرونده مقاله -
دسترسی آزاد مقاله
10 - ضرب کننده آنالوگ چهار ربعی با پاسخ فرکانسی بالا
حمید باشی سیدهادی موسوی ابوالفضل امیریترانزیستور نانولوله کربنی اثر میدانی ( CNFET ) یک فن آوری امیدوار کننده و جدید است که به محدودیتهای سنتی تکنولوژی سیلیکون مدار مجتمعغلبه می کند. در سال های اخیر، از پتانسیل CNFET برای کاربرد در مدار آنالوگ استفاده شده است. در این مقاله یک ضرب کننده چهار ربعی آنالوگبا اس چکیده کاملترانزیستور نانولوله کربنی اثر میدانی ( CNFET ) یک فن آوری امیدوار کننده و جدید است که به محدودیتهای سنتی تکنولوژی سیلیکون مدار مجتمعغلبه می کند. در سال های اخیر، از پتانسیل CNFET برای کاربرد در مدار آنالوگ استفاده شده است. در این مقاله یک ضرب کننده چهار ربعی آنالوگبا استفاده از CNFETs. طراحی شده است. شبیه سازی را بر اساس تکنولوژی CNFET 32nm نشان می دهد کهضرب کنندهدارای اعوجاج هارمونیک بسیار کم ( کمتر از 0.45٪ ) ، محدوده ورودی بزرگ (mv400± ) ، پهنای باند بزرگ(~GHz 50 ) وتوان مصرفی پایین (~μW 247 )، در حالی که در ولتاژ تغذیه0.9±ولت است. پرونده مقاله -
دسترسی آزاد مقاله
11 - شبیه سازی و بررسی پارامترهای موثر بر کاهش توان مصرفی در مدارهای ضرب کننده با استفاده از فناوری ترانزیستورهای CNT
عبدالرسول مقاتلی حسین مومن زاده محمد نادر کاکاییدر این مقاله، به ارائه یک ضربکننده آنالوگ چهار ربعی مد جریان جدید برپایه ترانزیستور های نانو لوله کربنی میپردازیم. مدارهای مجذورکننده جریان که اخیرا طراحیشده است و آینه جریان، که در ولتاژ تغذیه پایین (1V) کار میکنند، اجزای اساسی در تحقق معادلات ریاضی هستند. در این پ چکیده کاملدر این مقاله، به ارائه یک ضربکننده آنالوگ چهار ربعی مد جریان جدید برپایه ترانزیستور های نانو لوله کربنی میپردازیم. مدارهای مجذورکننده جریان که اخیرا طراحیشده است و آینه جریان، که در ولتاژ تغذیه پایین (1V) کار میکنند، اجزای اساسی در تحقق معادلات ریاضی هستند. در این پژوهش مدار ضربکننده، با استفاده از فناوری CNTFET ،32 نانو متر طراحی میشود و برای معتبر ساختن عملکرد مدار، ضربکننده ارائهشده در شبیهساز HSPICE شبیهسازی شده است. نتایج حاصل از شبیهسازی نشان می دهد که مدار قابلیت عملکرد مطلوب را تا فرکانس 2 گیگا هرتز ، مصرف توان ماکزیمم 3.7464µw و همچنین دارای THD 0.226043% می باشد. پرونده مقاله -
دسترسی آزاد مقاله
12 - Analysis and Design of a High Performance Radix-4 Booth Scheme in CMOS Technology
Ali RahnamaeiIn this paper, a novel high performance structure has been demonstrated which can be widely used for circuit-level realization of radix-4 Booth scheme. The notable privilege of proposed scheme is its higher speed for generation of Partial Products (PPs) compared to the چکیده کاملIn this paper, a novel high performance structure has been demonstrated which can be widely used for circuit-level realization of radix-4 Booth scheme. The notable privilege of proposed scheme is its higher speed for generation of Partial Products (PPs) compared to the previous designs. The objective has been achieved by means of the modified truth table of Booth algorithm. Moreover, Pass-Transistor Logic (PTL) has been employed to reduce the middle stage capacitances which has considerably enhanced the operating frequency of the designed architecture. The thorough analysis over previously reported works has also been provided to help the authors for optimized implementation of the Booth circuitry. Simulation results for TSMC 0.18µm CMOS technology and 1.8V power supply using HSPICE indicate the correct operation of the proposed scheme. In addition, the best-reported works have been redesigned and simulated on the same conditions to provide a fair comparative environment with our designed scheme. The results demonstrate the superiority of our circuit over the selected structures. پرونده مقاله -
دسترسی آزاد مقاله
13 - مدار شارژ سیستم ذخیرهکننده انرژی مبدل چندورودی با بهره بالا (طراحی، شبیهسازی و بررسی آزمایشگاهی)
دنیا طاهری غضنفر شاهقلیان سید محمد مهدی میرطلاییدر این مقاله یک توپولوژی مبدل غیرایزوله چندورودی با بهره بالا برای کاربردهای انرژی های پاک که نیاز به سیستم ذخیره ساز انرژی دارند پیشنهاد شده است. در این مبدل از تکنیک های سلول چند برابرکننده ولتاژ و همچنین سلف تزویج برای طراحی مدار استفاده شده که با ترکیب آنها امکان ا چکیده کاملدر این مقاله یک توپولوژی مبدل غیرایزوله چندورودی با بهره بالا برای کاربردهای انرژی های پاک که نیاز به سیستم ذخیره ساز انرژی دارند پیشنهاد شده است. در این مبدل از تکنیک های سلول چند برابرکننده ولتاژ و همچنین سلف تزویج برای طراحی مدار استفاده شده که با ترکیب آنها امکان استفاده از کلیدهایی با استرس ولتاژ پایین و در نتیجه رسانایی کم وجود دارد. عملکرد شارژ سیستم ذخیره انرژی توضیح داده شده و برای طراحی مبدل چند ورودی غیرایزوله با بهره ولتاژ بالا ساختار و عملکرد مبدل پیشنهادی بررسی شده است. روش طراحی دقیق بهمنظور عملکرد صحیح مبدل ارائه شده و نتایج شبیه سازی عملکرد مبدل نشان داده شده است. در انتها جهت تأیید صحت نتایج حاصل از شبیه سازی مبدل پیشنهادی، یک نمونه آزمایشگاهی از مبدل پیشنهادی برای تأمین بار 400ولت- 400 وات ساخته شده و مقایسه بین نتایج انجام شده است. پرونده مقاله -
دسترسی آزاد مقاله
14 - Design and Dynamic Modeling of Planar Parallel Micro-Positioning Platform Mechanism with Flexible Links Based on Euler Bernoulli Beam Theory
N.S Viliani H Zohoor M.H KargarnovinThis paper presents the dynamic modeling and design of micro motion compliant parallel mechanism with flexible intermediate links and rigid moving platform. Modeling of mechanism is described with closed kinematic loops and the dynamic equations are derived using Lagran چکیده کاملThis paper presents the dynamic modeling and design of micro motion compliant parallel mechanism with flexible intermediate links and rigid moving platform. Modeling of mechanism is described with closed kinematic loops and the dynamic equations are derived using Lagrange multipliers and Kane’s methods. Euler-Bernoulli beam theory is considered for modeling the intermediate flexible link. Based on the Assumed Mode Method theory, the governing differential equations of motion are derived and solved using both Runge-Kutta-Fehlberg4, 5th and Perturbation methods. The mode shapes and natural frequencies are calculated under clamped-clamped boundary conditions. Comparing perturbation method with Runge-Kutta-Fehlberg4, 5th leads to same results. The mode frequency and the effects of geometry of flexure hinges on intermediate links vibration are investigated and the mode frequency, calculated using Fast Fourier Transform and the results are discussed. پرونده مقاله -
دسترسی آزاد مقاله
15 - Application of variational iteration method for solving singular two point boundary value problems
Shadan Sadigh BehzadiIn this paper, He's highly prolic variational iteration method is applied ef-fectively for showing the existence, uniqueness and solving a class of singularsecond order two point boundary value problems. The process of nding solu-tion involves generation of a sequence چکیده کاملIn this paper, He's highly prolic variational iteration method is applied ef-fectively for showing the existence, uniqueness and solving a class of singularsecond order two point boundary value problems. The process of nding solu-tion involves generation of a sequence of appropriate and approximate iterativesolution function equally likely to converge to the exact solution of the givenproblem which being processed out and improvised on its own at every step re-cursively. Moreover, Illustrative examples available to the context in literaturewhen treated with, by application of such proposed method fetch encouragingresults so as to justify and reveal its eciency and usefulness of the method. پرونده مقاله -
دسترسی آزاد مقاله
16 - توسعه یک مدل تحلیل پوششی دادههای شبکهای مضربی جهت بررسی ساختار درونی واحدهای تصمیمگیرنده
Reza Soleymani-Damanehتحلیل پوششی دادهها به دلیل عدم نیاز به تابع تولید، از زمان ارائه موردتوجه محققین جهت ارزیابی عملکرد بوده است. اما مدلهای اولیه تحلیل پوششی دادهها جهت بررسی ساختار درونی واحدها ناتوان هستند و دیدگاه جعبه سیاه دارند. از جمله متداولترین ساختارهای شبکهای، دومرحلهای مت چکیده کاملتحلیل پوششی دادهها به دلیل عدم نیاز به تابع تولید، از زمان ارائه موردتوجه محققین جهت ارزیابی عملکرد بوده است. اما مدلهای اولیه تحلیل پوششی دادهها جهت بررسی ساختار درونی واحدها ناتوان هستند و دیدگاه جعبه سیاه دارند. از جمله متداولترین ساختارهای شبکهای، دومرحلهای متوالی است. مدلهای موجود جهت ارزیابی این ساختار عمدتا دارای رویکرد تجزیه میباشند، به عبارت دیگر اولویت آنها کارایی کل است و از تجزیه کارایی کل، کارایی مراحل بدست میآید. در این مقاله تلاش شده است تا یک مدل چندهدفه مضربی که همزمان کارایی کل و کارایی مراحل را مدنظر قرار میدهد توسعه داده شود. همچنین برای حالت جواب چندگانه، مدلهایی جهت محاسبه کاراییها ارائه و اثبات شد که در تمامی مدلها نمرات کارایی بین صفر تا یک میشود و تنها در صورتی یک واحد کارای شبکهای میشود که در هر دومرحله کارا باشد. مدلهای توسعهداده شده به ساختار دومرحلهای با ورودی و خروجی مازاد نیز تعمیم داده شد. از مدل ارائه شده در یک مثال کاربردی استفاده شد و نتایج نشان داد که مدل موجود نسبت به مدلهای سنتی ارزیابی واقعبینانهتری انجام میدهد. پرونده مقاله -
دسترسی آزاد مقاله
17 - Solution to “the Kuznets Riddle”
Ihor Skvortsov Olena Zahoretska Oksana Musiiovska Anatolii HavryliakS. Kuznets's study that the average propensity to consume is a constant value were nexpected because they denied one of the basic provisions of the Keynesian theory. This fact was called "the riddle of Kuznets". F. Modigliani and M. Friedman, using the hypothesis of the چکیده کاملS. Kuznets's study that the average propensity to consume is a constant value were nexpected because they denied one of the basic provisions of the Keynesian theory. This fact was called "the riddle of Kuznets". F. Modigliani and M. Friedman, using the hypothesis of the life cycle and the concept of constant income, proposed two options that explain its solution. But models should not explain, but give a method of solution. The most controversial is the indicator of autonomous consumption. In the first model, it grows, and in the second it goes to zero. Creation of a method of simulation of consumption functions based on common methodological principles for the consideration of micro and macroeconomic systems. Having constructed a model that objectively describes the activity of a separate enterprise, the primary and primary links of the macroeconomic system, we can explore the whole system. At the exit of the economic system we consider two functions of the offer - cost and cost-price, and one demand. These functions form two types of Keynesian cross, which define two points: break-even and economic power (equilibrium In a three-dimensional space a chain of transformations is considered: profit, investments, fixed assets, growth of depreciation (constant costs) and output. The condition for the formation of a "proportional development economy" - the average propensity to consume should remain unchanged, which is achieved when the marginal values of the multipliers of fixed costs and return on assets are constant. Such periods were explored by S. Kuznets. پرونده مقاله -
دسترسی آزاد مقاله
18 - تحلیل مقادیر وابسته به وضعیت ضریب فزاینده مالیاتی در اقتصاد ایران
نگین حیدری زاده سید یحیی ابطحی زهره طباطبایی نسب محمد علی دهقان تفتیهدف مقاله بررسی مقادیر وابسته به وضعیت ضریب فزاینده مالیاتی در ایران براساس مدل آستانهای رومر و رومر (2010) با استفاده از دادههای فصلی 1398:04 -1369:02 است. بدینمنظور، از مدل پویای آستانهای سی. رومر و دی. اچ. رومر (2010) استفاده شد تا ضرایب وابسته به وضعیت درآمدهای چکیده کاملهدف مقاله بررسی مقادیر وابسته به وضعیت ضریب فزاینده مالیاتی در ایران براساس مدل آستانهای رومر و رومر (2010) با استفاده از دادههای فصلی 1398:04 -1369:02 است. بدینمنظور، از مدل پویای آستانهای سی. رومر و دی. اچ. رومر (2010) استفاده شد تا ضرایب وابسته به وضعیت درآمدهای مالیاتی برای بررسی آثار سیاستهای مالی بر تولید در اقتصاد ایران بهدست بیاید. نتایج نشان داد ضرایب فزاینده در رژیمهای پایین و میانی رشد اقتصادی معنادار نیست؛ اما ضریب فزاینده مالیاتی در رژیم بالای رشد اقتصادی کاملاً معنادار است. همچنین، ضرایب فزاینده مالیاتی در دورههایی با رشد پایین اقتصادی، کوچکتر میشوند و این ضرایب در زمانهای رشد بالا نسبت بهکل دوره نمونه بزرگتر میشوند. بنابراین، اگرچه سیاستهای مالیاتی در دوران رکود نقش مؤثری ایفا نمیکنند؛ اما در دوران رونق میتوانند به ابزار کاملاً مؤثری برای تثبیت و ماندگاری رشد اقتصادی تبدیل شوند. بنابراین، بهتر است در دورههایی با رشد پایین تولید سیاستگذاران از کاربرد محرکهای مالیاتی بهعنوان ابزاری برای افزایش تقاضا و رشد تولید بپرهیزند؛ اما با بالا رفتن رشد تولید، محرکهای مالیاتی میتواند ابزار مناسبی برای ماندگاری رشد اقتصادی تلقی شود و به سیاستگذاران کمک کند با استفاده از این ابزار، تداوم رشد تولید را میسر کنند. پرونده مقاله -
دسترسی آزاد مقاله
19 - محاسبه پیوندهای پسین و پیشین مواد معدنی معادن ایران (کاربرد رهیافت داده ـ ستانده)
میر حسین موسوی فرید دهقانی آزاده روشن روانچکیده هدف این مقاله رتبه بندی مواد معدنی معادن در حال بهره برداری ایران از طریق بررسی پیوندهای پسین و پیشین بخش ها می باشد. برای این منظور از جدول داده– ستانده بهنگام سال 1390 مرکز پژوهش های مجلس استفاده شده است. با محاسبه ضریب فزاینده تولید از طریق الگوی تقاضا چکیده کاملچکیده هدف این مقاله رتبه بندی مواد معدنی معادن در حال بهره برداری ایران از طریق بررسی پیوندهای پسین و پیشین بخش ها می باشد. برای این منظور از جدول داده– ستانده بهنگام سال 1390 مرکز پژوهش های مجلس استفاده شده است. با محاسبه ضریب فزاینده تولید از طریق الگوی تقاضامحور لئونتیف، تمامی بخش های معدنی ضریب فزاینده تولید بالاتر از یک داشتند. همچنین با محاسبه پیوند پیشین با استفاده از الگوی عرضهمحورِ گش، ضریب فزاینده عرضه در تمام بخش های معدنی بالاست. با بررسی شاخص قدرت از طریق الگوی تقاضامحور راس موسن، بخش های ذغال سنگ و لینیت، ذغال سنگِ نارس و سنگ، ماسه و خاک رس با شاخص قدرت انتشار بزرگ تر از یک، پس از بخش کشاورزی، ساختمان و صنعت، به دلیل ارتباط بیشتری که با سایر بخش ها در زمینه خریدِ نهاده های واسطه ای برقرار می کنند، نسبت به میانگین کل فعالیت ها، اشتغال بیشتری را به همراه داشتند. از این لحاظ، سایر بخش های معدن جایگاهی در میان بخش های نخستین نداشتند. پرونده مقاله -
دسترسی آزاد مقاله
20 - طراحی یک مبدل بسیار افزاینده DC-DC مبتنی بر شبکه شبه امپدانس با تنش ولتاژ کم، با به کارگیری تکنیک سلف کوپل شده
حسین جعفری مهدی شانه توحید نوریساختارهای بسیار افزاینده عموماً برای ارتقاء سطح ولتاژ پایین تولید شده توسط منابع انرژی تجدید پذیر به کار گرفته میشوند. در این مقاله یک ساختار بسیار افزاینده مبتنی بر شبکه شبه امپدانس ارائه شده است، که دارای ساختاری ساده و در عین حال کاربردی متشکل از دو سلف و خازن میبا چکیده کاملساختارهای بسیار افزاینده عموماً برای ارتقاء سطح ولتاژ پایین تولید شده توسط منابع انرژی تجدید پذیر به کار گرفته میشوند. در این مقاله یک ساختار بسیار افزاینده مبتنی بر شبکه شبه امپدانس ارائه شده است، که دارای ساختاری ساده و در عین حال کاربردی متشکل از دو سلف و خازن میباشد. با توجه به ضریب وظیفه در محدوده ۵۰ درصد برای این مبدل مشکلات بازیابی معکوس دیودها و پایدارسازی مبدل برطرف میگردد. از طرفی زمین مشترک کلید قدرت و منبع ورودی باعث سادگی مدار کنترل میشود. با بهره گیری از تکنیک سلف کوپل شده و همچنین سلول چند برابر کننده ولتاژ، بهره ولتاژ مبدل به مقدار چشمگیری افزایش می یابد. علاوه بر آن در جهت محدود کردن تنش ولتاژ روی کلید، از خازن استک شده استفاده شده است. استفاده از ساختار پیشنهادی باعث افزایش بهره ولتاژ مبدل میگردد. همچنین ساختار ارائه شده سطح تنش ولتاژ روی نیمه هادیهای مدار را کاهش میدهد که باعث کاهش هزینه و افزایش راندمان مدار میگردد. مبدل طراحی شده با ولتاژ ورودی 25 ولت و ولتاژ خروجی400 ولت و توان 100 وات در نرم افزار اسپایس شبیه سازی شده و نتایج در مقاله آمده است. پرونده مقاله -
دسترسی آزاد مقاله
21 - طراحی و بهبود یک مبدل بوست بهره بالا با مدار چندبرابر کننده ولتاژ
صادق حیدری بنی سید محمد مهدی میرطلائیاز آنجا که انرژی فسیلی سنتی تجدیدپذیر نیست جوامع امروزی با مشکل کمبود انرژی مواجه می باشند. در نتیجه باید انرژی جدید توسعه داده شود که پاک و تجدیدپذیر باشد. انرژی خورشیدی و انرژی هیدروژنی نویدبخش هستند و تولید توان فتوولتائیک و پیل سوختی به عنوان روش های مورد استفاده بر چکیده کاملاز آنجا که انرژی فسیلی سنتی تجدیدپذیر نیست جوامع امروزی با مشکل کمبود انرژی مواجه می باشند. در نتیجه باید انرژی جدید توسعه داده شود که پاک و تجدیدپذیر باشد. انرژی خورشیدی و انرژی هیدروژنی نویدبخش هستند و تولید توان فتوولتائیک و پیل سوختی به عنوان روش های مورد استفاده برای دو منبع انرژی در مقیاس بزرگی مورد استفاده قرار گرفته اند. در یک سیستم تک فاز با ساختار دو مرحله ای اگر ولتاژ خط 220 ولت باشد ولتاژ باس اینورتر متصل به شبکه لازم است که در حدود 380 ولت باشد. هرچند ولتاژ خروجی سلول های فتوولتائیک و سلول های سوختی به طور کلی بین 25 تا 40 ولت است که این ولتاژ بسیار کمتر از ولتاژ باس می باشد. بنابراین یک مبدل DC-DC بهره بالا لازم است تا ولتاژ خروجی پیل های سوختی و سلول های فتوولتائیک را تقویت کند. در این مقاله، ساختار بهبود یافته ای تحت عنوان مبدل بوست بهره بالا به همراه مدار چندبرابر کننده ولتاژ برای کاربردهای سلول خورشیدی ارائه خواهد شد. در ساختار پیشنهادی برای افزایش بهره از تکنیک مدار چندبرابر کننده ولتاژ و سلف کوپلشده استفاده شده است. به طور کلی مزایای مبدل پیشنهادی شامل بهره ولتاژ و راندمان بالا، استرس ولتاژ پایین برای سوئیچها و دیودها، فراهم آوردن شرایط سوئیچینگ نرم و نهایتا کاهش حجم المانهای مغناطیسی و حجم کلی مدار می باشد. در این پژوهش علاوه بر تشریح عملکرد مدار و ارائهی تحلیلهای تئوری، صحت عملکرد مدار از طریق شبیهسازی نرمافزاری بررسی خواهد شد و در انتها با پیادهسازی عملی نمونه آزمایشگاهی، نتایج شبیهسازی مورد ارزیابی قرار می گیرد. پرونده مقاله -
دسترسی آزاد مقاله
22 - طراحی و شبیهسازی یک ضربکننده خازنی جدید با بایاس جریان تطبیقی و تکنیک گیت شبهشناور با ویژگی تنظیمپذیری الکترونیکی و خطینگی بالا برای کاربردهای زیستپزشکی
محمد آقایی جشوقانی مهدی دولتشاهی سید محمد علی زنجانی محمدامین هنروراستفاده از ضربکنندههای خازنی در مدارهای مجتمع فرکانس پایین، تاثیر قابل توجه در کاهش مساحت تراشه دارد. در مدار پیشنهادی بهمنظور کاهش مقاومت معادل سری در طبقه ورودی از ساختار مبتنیبر دنبالکننده جریان بازگشتی استفاده شده است. استفاده از مدار کمکی جهت تطبیق ج چکیده کاملاستفاده از ضربکنندههای خازنی در مدارهای مجتمع فرکانس پایین، تاثیر قابل توجه در کاهش مساحت تراشه دارد. در مدار پیشنهادی بهمنظور کاهش مقاومت معادل سری در طبقه ورودی از ساختار مبتنیبر دنبالکننده جریان بازگشتی استفاده شده است. استفاده از مدار کمکی جهت تطبیق جریان بایاس ترانزیستورها و اعمال سیگنالهای لازم توسط تکنیک گیت شبهشناور بهمنظور کاهش توان مصرفی ایستا و افزایش خطینگی از دیگر ویژگیهای مدار پیشنهادی است. همچنین جهت افزایش خطینگی از فیدبک منفی استفاده شده است تا ولتاژ لازم به گیت ترانزیستورهای نمونهبردار جریان اعمال شود. ضریب مقیاسگذاری K با روش فعال قابل تنظیم است. مقاومت ورودی پایین و مقاومت خروجی بالا و حداقل مساحت مدار پیشنهادی، از نتایج نظری و شبیهسازی مدار پیشنهادی است. مدار پیشنهادی در فناوری 18/0 میکرومتر و با تغذیه 8/0 ولت شبیهسازی شده است. نتایج نشان میدهد مدار پیشنهادی برای خازن معادل 204 پیکوفاراد با خازن پایه 1 پیکو فاراد، توانی معادل 850 نانووات مصرف میکند. بهعنوان مثالی دیگر، برای تحقق خازن 101 پیکو فاراد با تغذیه و خازن پایه مذکور، ضربکننده پیشنهادی، به مساحتی 3/6 بار کمتر و پهنای باند 23 بار بیشتر نسبت به FCF نیاز دارد که نشانگر افزایش صحت طرح پیشنهادی است. در مدار پیشنهادی، با حضور مدار تطبیق جریان با دامنه سیگنال 7 نانوآمپر در ورودی، دامنه سیگنال جریان خروجی 1510 نانو آمپر است؛ در حالی که جریان بایاس خروجی 100 نانوآمپر بوده و مقدار اعوجاج هارمونیکی 6/3 درصد است. مدار پیشنهادی دارای بیشترین ضریب شایستگی یعنی 823/48 مگاهرتز بر میکرووات است که معرف عملکرد بهتر نسبت به مدارهای گزارششده قبلی است. پرونده مقاله -
دسترسی آزاد مقاله
23 - Variational Iteration Method for Fredholm integral equations of the second kind
ج. بی آزار H. ابراهیمیIn this paper, He‘s variational iteration method is applied to Fredholm integral equations of the second kind. To illustrate the ability and simplicity of the method, some examples are provided. The results reveal that the proposed method is very effective and sim چکیده کاملIn this paper, He‘s variational iteration method is applied to Fredholm integral equations of the second kind. To illustrate the ability and simplicity of the method, some examples are provided. The results reveal that the proposed method is very effective and simple and for first fourth examples leads to the exact solution. پرونده مقاله -
دسترسی آزاد مقاله
24 - Design and Implementation of MOSFET Circuits and CNTFET, Ternary Multiplier in the Field of Galois
Malakeh Karimghasemi-rabori Peiman KeshavarzianDue to the high density and the low consumption power in the digital integrated circuits, mostly technology of CMOS is used. During the past times, the Metal oxide silicon field effect transistors (MOSFET) had been used for the design and implementation of the digital i چکیده کاملDue to the high density and the low consumption power in the digital integrated circuits, mostly technology of CMOS is used. During the past times, the Metal oxide silicon field effect transistors (MOSFET) had been used for the design and implementation of the digital integrated circuits because they are compact and also they have the less consumption power and delay to the other transistors. But after discovering the carbon nano-tubes by Ijima et al., several studies have been done on these structures in the other sciences. Single cover nano-tubes due to the electrical traits such as low consumption power, high speed, the compact area with the smallest dimensions in the form of nano by the unique configuration, multiple threshold recognition, least threshold of noise, etc. better than the other nano-tubes. Over the past times, bi-valued logic was used but these days, multi-valued logic (due to the features such as high speed in the transfer of information, decrease of the number of gate, the decrease of operation, etc) is being used. Among the multi-valued logics, triple one because of less evaluated cost of installation and the simple method for implementation of the electronic circuits, is considered more than the other. In this article, by the use of triple-valued field of Galois, the multiplier circuits based on Metal oxide silicon field effect transistors (MOSFET) as well, the transistors of field effect of semi-carbon nano-tubes were designed and implemented. پرونده مقاله -
دسترسی آزاد مقاله
25 - Modular Parallel-Prefix Arithmetic Circuits design based on Reversible Computing
Ailin Asadpour Amir Sabbagh Molahosseini Azadeh Alsadat Emrani ZarandiPower consumption in today's modern high-performance computing systems is one of the most important design issues. Reversible computations have attracted a lot of attention compared to classical calculations due to their ability to reduce energy loss and power consumpti چکیده کاملPower consumption in today's modern high-performance computing systems is one of the most important design issues. Reversible computations have attracted a lot of attention compared to classical calculations due to their ability to reduce energy loss and power consumption of circuits. The reversible logic has applications in various technologies such as quantum circuits, low power circuit design, nanotechnology, optical information processing, DNA and bioinformatics calculations. Adder and multiplier are the main parts of any computing systems and therefore play an important role in the performance of reversible computations. Features of a reversible ripple-carry adder are high quantum depth, low quantum cost, low garbage outputs, and low constant input bits. In this paper, a new reversible kogge-Stone parallel-prefix adder and multiplier is proposed for modulo 2n±1. The analysis shows that the reversible-logic parallel-prefix adder and multiplier are faster and have the lowest depth compared to the reversible-logic-based ripple-carry adder and multiplier. پرونده مقاله -
دسترسی آزاد مقاله
26 - نقش ادوار تجاری در تعیین مقدار ضریب فزاینده سیاست مالی (با تاکید بر مالیاتهای مستقیم و غیرمستقیم) مطالعه موردی اقتصاد ایران
یوسف مرادی کیومرث شهبازی سلیمان فیضی ینگجهچکیده هدف مطالعه حاضر بررسی تأثیر سیاست مالی بر رشد اقتصادی و برآورد ضریب فزاینده سیاست مالی طی ادوار تجاری است. بدین منظور از داده های فصلی اقتصاد ایران طی دوره زمانی 1372 تا 1397 استفادهشده است. جهت برآورد ضریب فزاینده سیاست مالی از سه روش، 1- مدل های خودرگرسیون برد چکیده کاملچکیده هدف مطالعه حاضر بررسی تأثیر سیاست مالی بر رشد اقتصادی و برآورد ضریب فزاینده سیاست مالی طی ادوار تجاری است. بدین منظور از داده های فصلی اقتصاد ایران طی دوره زمانی 1372 تا 1397 استفادهشده است. جهت برآورد ضریب فزاینده سیاست مالی از سه روش، 1- مدل های خودرگرسیون برداری مبتنی بر روش بلانچارد و پروتی 2002، 2- روش مبتنی بر رگرسیون معرفی شده توسط هال 2009 و 3- مدل های تعادل عمومی پویای تصادفی استفاده می شود. در مطالعه حاضر از روش دوم و از الگوی چرخشی مارکوف که مبتنی بر روش رگرسیون می باشد، استفاده شده است تا ضریب فزاینده سیاست مالی طی ادوار تجاری محاسبه شود. لذا با تصریح پنج الگوی متفاوت نشان داده شد که مالیات های مستقیم نسبت به مالیات های غیرمستقیم در اثرگذاری بر رشد اقتصادی بهتر عمل می کنند. همچنین در بین سه ابزار سیاست مالی، بزرگترین ضریب فزاینده در دوره رکود مربوط به مخارج دولت و در دوره رونق مربوط به مالیات های مستقیم است. از سویی بسته سیاست مالی دولت که حاوی مخارج دولت و مالیات های غیرمستقیم باشد نسبت به بسته ای که حاوی مخارج و مالیات های مستقیم باشد در اثرگذاری بر رشد اقتصادی بهتر عمل می کند. پرونده مقاله -
دسترسی آزاد مقاله
27 - *-frames in Hilbert modules over pro-C*-algebras
M. Naroei Irani A. Nazari‎In this paper‎, ‎by using the sequence of multipliers‎, ‎we introduce frames with algebraic bounds in Hilbert pro-$ C^* $-modules‎. ‎We investigate the relations between frames and $ \ast $-frames‎. ‎Some properties of $ \ast $-frame چکیده کامل‎In this paper‎, ‎by using the sequence of multipliers‎, ‎we introduce frames with algebraic bounds in Hilbert pro-$ C^* $-modules‎. ‎We investigate the relations between frames and $ \ast $-frames‎. ‎Some properties of $ \ast $-frames in Hilbert pro-$ C^* $-modules are studied‎. ‎Also‎, ‎we show that there exist two differences between $ \ast $-frames in Hilbert pro-$ C^* $-modules and Hilbert $ C^* $-modules‎. ‎Finally‎, ‎dual $ \ast $-frames in Hilbert pro-$ C^* $-modules are presented‎. پرونده مقاله -
دسترسی آزاد مقاله
28 - On the duality of quadratic minimization problems using pseudo inverses
D. Pappas G. Domazakis‎In this paper we consider the minimization of a positive semidefinite quadratic form‎, ‎having a singular corresponding matrix $H$‎. ‎We state the dual formulation of the original problem and treat both problems only using the vectors $x \in \mathca چکیده کامل‎In this paper we consider the minimization of a positive semidefinite quadratic form‎, ‎having a singular corresponding matrix $H$‎. ‎We state the dual formulation of the original problem and treat both problems only using the vectors $x \in \mathcal{N}(H)^\perp$ instead of the classical approach of convex optimization techniques such as the null space method‎. ‎Given this approach and based on the strong duality principle‎, ‎we provide a closed formula for the calculation of the Lagrange multipliers $\\lambda$ in the cases when (i) the constraint equation is consistent and (ii) the constraint equation is inconsistent‎, ‎using the general normal equation‎. ‎In both cases the Moore-Penrose inverse will be used to determine a unique solution of the problems‎. ‎In addition‎, ‎in the case of a consistent constraint equation‎, ‎we also give sufficient conditions for our solution to exist using the well known KKT conditions. پرونده مقاله -
دسترسی آزاد مقاله
29 - On the continuity of some linear maps on certain Banach algebras
H. Farhadi E. Ghaderi‎Let $\mathcal{A}$ and $\mathcal{U}$ be Banach algebras‎, ‎$\theta$ be a nonzero character on $\mathcal{A}$ and let ${\mathcal{A}}\times_{\theta}{\mathcal{U}}$ be the corresponding Lau product Banach algebra‎. ‎In this paper we investigate derivation چکیده کامل‎Let $\mathcal{A}$ and $\mathcal{U}$ be Banach algebras‎, ‎$\theta$ be a nonzero character on $\mathcal{A}$ and let ${\mathcal{A}}\times_{\theta}{\mathcal{U}}$ be the corresponding Lau product Banach algebra‎. ‎In this paper we investigate derivations and multipliers of ${\mathcal{A}}\times_{\theta}{\mathcal{U}}$ and study the automatic continuity of these maps‎. ‎We also study continuity of the derivations for some special cases of $\mathcal{U}$ and the Banach $({{\mathcal{A}}\times_{\theta}\mathcal{U}})$-bimodule ${\mathcal{X}}$ and establish various results in this respect‎. ‎Some of the results are devoted to find conditions under which one can represent a derivation on ${{\mathcal{A}}\times_{\theta}\mathcal{U}}$ as sum of two derivations in such a way that one of them is continuous‎. ‎Some examples are also given‎. پرونده مقاله -
دسترسی آزاد مقاله
30 - On the boundedness of almost multipliers on certain Banach algebras
E. Ansari-Piri M. Shams Yousefi S. NouriAlmost multiplier is rather a new concept in the theory of almost functions. In thispaper we discussion the boundedness of almost multipliers on some special Banach algebras,namely stable algebras. We also define an adjoint and extension for almost multiplier.Almost multiplier is rather a new concept in the theory of almost functions. In thispaper we discussion the boundedness of almost multipliers on some special Banach algebras,namely stable algebras. We also define an adjoint and extension for almost multiplier. پرونده مقاله -
دسترسی آزاد مقاله
31 - Some algebraic properties of Lambert Multipliers on $L^2$ spaces
A. Zohri S. Khalil SarbazIn this paper, we determine the structure of the space of multipliers of the rangeof a composition operator $C_\varphi$ that induces by the conditional expectation between two $L^p(\Sigma)$spaces.In this paper, we determine the structure of the space of multipliers of the rangeof a composition operator $C_\varphi$ that induces by the conditional expectation between two $L^p(\Sigma)$spaces. پرونده مقاله -
دسترسی آزاد مقاله
32 - Using Fuzzy Interest Rates for Uncertainty Modelling in Enhanced Annuities Pricing
Mahboubeh AalaeiThe modeling of uncertainty resources‎‎ is very ‎important in ‎insurance pricing‎‎. ‎In this paper‎, ‎fuzzy set theory is implemented to model ‎interest ‎rates ‎as ‎an ‎uncertainty ‎resources‎ for calculati چکیده کاملThe modeling of uncertainty resources‎‎ is very ‎important in ‎insurance pricing‎‎. ‎In this paper‎, ‎fuzzy set theory is implemented to model ‎interest ‎rates ‎as ‎an ‎uncertainty ‎resources‎ for calculating the price of ‎enhanced ‎annuities. In this regard, ‎t‎he ‎single ‎fuzzy‎ ‎premium ‎for a‎ ‎fixed ‎annuity ‎payouts ‎is ‎calculated ‎using‎‎‎ ‎adjusted ‎mortality ‎probabilities ‎for ‎an ‎insured ‎with ‎health ‎problems ‎and ‎the ‎results ‎are‎ ‎compared ‎with ‎standard ‎status. ‎As the ‎adjustment ‎multiplier‎‎‎ increases, which means that the health problems of the insured are worse, the life expectancy of the person decreases. In addition, as adjustment ‎multiplier‎‎‎ increases, the insurance premium decreases, which is due to the adjustment of survival and mortality probabilities based on the individual's health status‎. Also, to show the validity of the ‎proposed‎ fuzzy method, the random interest rate has been used. The results of the ‎fuzzy ‎and ‎random‎ models are close to each other ‎which indicates the validation of proposed method‎. پرونده مقاله -
دسترسی آزاد مقاله
33 - Investigating the New Conservation Laws of Hunter-Saxton Equation via Lie Symmetries
Mehdi Jafari Somayeh Sadat Mahdion‎In this research‎, ‎using the multiplier method and the 2-dimensional‎ homotopy operator‎, ‎higher order conservation laws for the‎ ‎Hunter-Saxton equation are computed‎. ‎Also‎, ‎in order to construct new‎ ‎conse چکیده کامل‎In this research‎, ‎using the multiplier method and the 2-dimensional‎ homotopy operator‎, ‎higher order conservation laws for the‎ ‎Hunter-Saxton equation are computed‎. ‎Also‎, ‎in order to construct new‎ ‎conservation laws‎, ‎the invariance properties of the multipliers are‎ ‎studied using Lie classical symmetries‎. پرونده مقاله -
دسترسی آزاد مقاله
34 - THE APPLICATION OF THE VARIATIONAL HOMOTOPY PERTURBATION METHOD ON THE GENERALIZED FISHER'S EQUATION
M. Matinfar M. MahdaviIn this paper, we consider the variational homotopy perturbation method (VHPM) to obtain an approximate series solution for the generalized Fisher’s equation which converges to the exact solution in the region of convergence. Comparisons are made among the variati چکیده کاملIn this paper, we consider the variational homotopy perturbation method (VHPM) to obtain an approximate series solution for the generalized Fisher’s equation which converges to the exact solution in the region of convergence. Comparisons are made among the variational iteration method (VIM), the exact solutions and the proposed method. The results reveal that the proposed method is very effective and simple and can be applied for other nonlinear problems in mathematical. پرونده مقاله -
دسترسی آزاد مقاله
35 - A SIMPLIFIED LAGRANGIAN MULTIPLIER APPROACH FOR FIXED HEAD SHORT-TERM HYDROTHERMAL SCHEDULING
S. Kavitha Nirmala P.RatchagarThis paper presents a simplifiedlagrangian multiplier based algorithm to solve the fixed head hydrothermalscheduling problem. In fixed head hydrothermal scheduling problem, waterdischarge rate is modeled as quadratic function of hydropower generation andfuel cost is mod چکیده کاملThis paper presents a simplifiedlagrangian multiplier based algorithm to solve the fixed head hydrothermalscheduling problem. In fixed head hydrothermal scheduling problem, waterdischarge rate is modeled as quadratic function of hydropower generation andfuel cost is modeled as quadratic function of thermal power generation. Thepower output of each hydro unit varies with the rate of water dischargedthrough the turbines. It is assumed that hydro plants alone are not sufficientto supply all the load demands during the scheduling horizon. In hydroscheduling, the specified total volume of water should be optimally dischargedthroughout the scheduling period. A novel mathematical approach has been developedto determine the optimal hydro and thermal power generation so as to minimizethe fuel cost of thermal units. The performance of the proposed method isdemonstrated with three test systems. The test results reveal that the proposedmethod provides optimal solution which satisfies the various system constraintsof fixed head hydrothermal scheduling problem. پرونده مقاله