-
حرية الوصول المقاله
1 - Impact of p-type semiconductor substrate on the transient response of metal-semiconductor-metal photodetector
Ali Barkhordari Hamid Mashayekhi Şemsettin Altındal Süleyman Özçelik Yashar Azizian-KalandaraghIn this paper, using finite difference method, the effect of adding a p-layer at the back of a metal-semiconductor-metal (MSM) photodetector (PD) on the spatial electric charge distribution and the transient response of the device is numerically studied. To this aim, th أکثرIn this paper, using finite difference method, the effect of adding a p-layer at the back of a metal-semiconductor-metal (MSM) photodetector (PD) on the spatial electric charge distribution and the transient response of the device is numerically studied. To this aim, the fundamental equations of the semiconductor device, i.e., two current continuity time-dependent equations have been considered coupled with Poisson's equation. The I-V curve of the MSM photodetector is obtained as the main characteristics of each semiconductor device. Moreover, the variations of electrostatic potential, electron and hole concentrations are determined in the MSM photodetector with a p-layer at the back of the active layer. It is observed that the peak transient response of an MSM device is improved by back-gating the device as more electrons are injected to the semiconductor layer and the slower charge carriers (the holes) to be removed from the top circuit. تفاصيل المقالة -
حرية الوصول المقاله
2 - حل مسایل هدایت گرمایی تصادفی معکوس با استفاده از الگوریتمهای بهینه سازی ازدحام ذرات و ژنتیک
ایرج ﺣﺴﯿﻦ زاده ﺷﺎه ﺑﻼﻗﯽ رضا پورقلی حسن دانا مزرعه سید هاشم طبسیﻫﺪف اصلی در اﯾﻦ ﻣﻘﺎﻟﻪ، ﺣﻞ ﯾﮏ ﻣﺴﺄﻟﻪ ﻣﻌﺎدﻟﻪ دﯾﻔﺮاﻧﺴﯿﻞ ﺟﺰﻳﯽ ﺗﺼﺎدﻓﯽ ﻣﻌﮑﻮس ﺑﺎ اﺳﺘﻔﺎده از الگوریتمهای تکاملی میباشد. الگوریتم ازدحام ذرات و الگوریتم ژنتیک، دو الگوریتم مورد نظر میباشند که در این مقاله از آنها استفاده میشود. در این مقاله، ﺑﺮای ﺣﻞ ﻣﺴﺎﻟﻪ ﻣﻌﺎدﻟﻪ دﯾﻔﺮاﻧﺴﯿﻞ ﺟ أکثرﻫﺪف اصلی در اﯾﻦ ﻣﻘﺎﻟﻪ، ﺣﻞ ﯾﮏ ﻣﺴﺄﻟﻪ ﻣﻌﺎدﻟﻪ دﯾﻔﺮاﻧﺴﯿﻞ ﺟﺰﻳﯽ ﺗﺼﺎدﻓﯽ ﻣﻌﮑﻮس ﺑﺎ اﺳﺘﻔﺎده از الگوریتمهای تکاملی میباشد. الگوریتم ازدحام ذرات و الگوریتم ژنتیک، دو الگوریتم مورد نظر میباشند که در این مقاله از آنها استفاده میشود. در این مقاله، ﺑﺮای ﺣﻞ ﻣﺴﺎﻟﻪ ﻣﻌﺎدﻟﻪ دﯾﻔﺮاﻧﺴﯿﻞ ﺟﺰﻳﯽ ﺗﺼﺎدﻓﯽ ﻣﻌﮑﻮس، اﺑﺘﺪا ﺑﺎ اﺳﺘﻔﺎده از روش ﮐﺮاﻧﮏ-ﻧﯿﮑﻠﺴﻮن ﻣﺴﺄﻟﻪ ﻣﻌﮑﻮس مورد نظر را ﮔﺴﺴﺘﻪ ﺳﺎزی میکنیم، ﺳﭙﺲ ﺑﺎ اﺳﺘﻔﺎده از اﻟﮕﻮرﯾﺘﻢ بهینهسازی ازدﺣﺎم ذرات و اﻟﮕﻮرﯾﺘﻢ ژﻧﺘﯿﮏ ﺑﻪ ﺣﻞ آنها میپردازیم. الگوریتمهایی که در این مقاله ارائه شده است، ﻧﺴﺒﺖ ﺑﻪ سایر روشهای قدیمی که تا بحال ارائه شده است، مزیتهایی دارد. پیادهسازی این الگوریتمها سادهتر است، زﻣﺎن اﺟﺮای ﮐﻤﺘﺮی دارﻧﺪ و ﺗﻘﺮﯾﺐ ﺑﻬﺘﺮی تولید میکنند. همچنین نتایج عددی بدست آمده در این مقاله نشان میدهند که جوابهای بدست آمده برای مثالهای مطرح شده در بخش نتایج عددی، دارای دﻗﺖ ﺑﺎﻻیی هستند و خطای کمتری دارند. همه الگوریتمهای موجود در این مقاله برای بدست آوردن نتایج عددی مورد نظر، بر روی پردازنده Pentium (R) Dual core E5700 با سرعت ۳.۰۰ گیگاهرتز پیادهسازی شده است. تفاصيل المقالة -
حرية الوصول المقاله
3 - یک مدل ریاضی برای بررسی جریان خون بهعنوان جریان سیال کراس در طول رگ گرفته شده
احمدرضا حقیقی نیکو پیرهادی محمد شهبازی اصلدر این تحقیق یک مدل دوبعدی برای جریان خون پالسی در طول رگ مخروطی با گرفتگی غیرمتقارن شبیهسازی شده است. جریان خون بهعنوان سیال کراس در یک لوله استوانه الاستیک با گرفتگی غیرمتقارن نسبت به جهت محوری و هندسهی وابسته به زمان مدلسازی میشود. دیواره عروق گرفته شده در طول أکثردر این تحقیق یک مدل دوبعدی برای جریان خون پالسی در طول رگ مخروطی با گرفتگی غیرمتقارن شبیهسازی شده است. جریان خون بهعنوان سیال کراس در یک لوله استوانه الاستیک با گرفتگی غیرمتقارن نسبت به جهت محوری و هندسهی وابسته به زمان مدلسازی میشود. دیواره عروق گرفته شده در طول رگ انعطافپذیر و غیرانعطافپذیر باهم مقایسه شده است. از فرض گرفتگی خفیف برای ساده کردن معادلات حاکم بر جریان استفاده میشود. با اعمال نگاشت مناسب شبکهی کسینوسی گرفته شده به یک شبکهی مستطیلی و صلب تبدیل میگردد. معادلات ناویر-استوکس حاکم بر جریان خون برای میدان سرعت با استفاده از روش تفاضلات متناهی حل میشود. به منظور اثبات درستی نتایج به دست آمده در تحقیق حاضر، نتایج حاصل با نتایج تحقیقات پیشین مورد مقایسه قرار گرفته و درستی مدل ارایه شده به اثبات رسیده است. مشخصههای اصلی جریان خون از قبیل دبی حجمی، مقاومت در برابر جریان، تنش برشی دیواره از روی پروفیل سرعت بدست آمده است. نمودارهای دوبعدی برای پارامترهای مختلفی از توزیع سرعت در شکلهای مختلف ارایه شده است. تفاصيل المقالة -
حرية الوصول المقاله
4 - حل عددی مدل اپیدمیک SIR به کمک روش تفاضل متناهی غیراستاندارد
عبدالرحمان یعقوبی هاشم صابری نجفیدر این مقاله، یک حالت خاص از روش تفاضل متناهی که روش تفاضل متناهی غیراستاندارد نامیده میشود برای حل عددی یک مدل ریاضی از بیماریهای اپیدمیک مورد مطالعه قرار گرفته است. طرح تفاضل متناهی غیر استاندارد ساخته شده دارای ویژگیهای مهم مدل پیوسته از قبیل مثبت بودن، کرانداری و أکثردر این مقاله، یک حالت خاص از روش تفاضل متناهی که روش تفاضل متناهی غیراستاندارد نامیده میشود برای حل عددی یک مدل ریاضی از بیماریهای اپیدمیک مورد مطالعه قرار گرفته است. طرح تفاضل متناهی غیر استاندارد ساخته شده دارای ویژگیهای مهم مدل پیوسته از قبیل مثبت بودن، کرانداری و پایداری میباشد. پایداری نقاط تعادل سیستم بررسی شده است. فرمولهای تفاضل متناهی غیر استاندارد ارائه شده همگرا به نقاط تعادل مدل میباشند. در حل مسائل غیرخطی، یکی از مزایای مهم این روش گسستهسازی جملات غیرخطی با استفاده از تقریبهای غیر محلی میباشد. در اغلب موارد فرمولهای تفاضل متناهی غیراستاندارد حتی وقتی اندازه طول گام شبکه بزرگ در نظر گرفته میشود پایدار هستند. لذا در سیستمهای دینامیکی که در بازههای زمانی بزرگ مورد مطالعه قرار میگیرند استفاده از روش غیراستاندارد مقرون بهصرفه خواهد بود. مثالهای عددی دقت و کارایی روش تفاضل متناهی غیر استاندارد را تائید میکنند. واژگان کلیدی: روش تفاضل متناهی غیر استاندارد، پایداری، نقاط تعادل، بیماریهای اپیدمیک. تفاصيل المقالة -
حرية الوصول المقاله
5 - محاسبه ترازهای انرژی معادلات شرودینگر خطی به روش سینک
خدیجه نوروزی سید محمد علی آل عمرانی نژاد مهدی سلیمانی بهناز فرناممحاسبه انرژی­های معادله شرودینگر در فیزیک از اهمیت ویژه­ای برخوردار است. به عنوان مثال در محاسبه میزان جذب نور و میزان شکست نور در یک ماده، محاسبه انرژی­های گذار بین زیرنواری و انرژی­های گذار بین نواری، از ترازهای انرژی استفاده می­کنیم. همچنین، به کم أکثرمحاسبه انرژی­های معادله شرودینگر در فیزیک از اهمیت ویژه­ای برخوردار است. به عنوان مثال در محاسبه میزان جذب نور و میزان شکست نور در یک ماده، محاسبه انرژی­های گذار بین زیرنواری و انرژی­های گذار بین نواری، از ترازهای انرژی استفاده می­کنیم. همچنین، به کمک ترازهای­های انرژی می­توان چگالی حالات یک سیستم فیزیکی را یافت و از روی آن به دلیل عایق، نیم رسانا و یا فلز بودن یک ماده پی­برد. روش­های زیادی در خصوص محاسبه ترازهای انرژی وجود دارد که هرکدام از نقاط ضعف و قدرتی برخوردارند. روش­های تکرار مجانبی، الگوریتم ژنتیک، نومروف، شبکه های عصبی، ماتریس انتقال و ... تعدادی از آنها می­باشند. محاسبه ترازهای انرژی به کمک توابع سینک، کمتر مورد توجه دانشمندان این حوزه بوده است. در این مقاله، کارایی روش هم محلی سینک در محاسبه این انرژی­ها را بررسی کرده­ایم. برای حل این مسائل، با استفاده از تقریب تابع مجهول به وسیله توابع سینک و به کمک روش هم محلی، مسئله را به یک مساله ویژه مقداری تبدیل می­کنیم. در ادامه با بیان مثال­هایی، دقت و سرعت این روش را با روش تفاضلات متناهی، که روشی رایج در بین فیزیکدانان است، مقایسه کرده­ایم. درنهایت، با توجه به جداول و محاسبات انجام شده، دقت و سرعت این روش در مقایسه با برخی از روش­ها، ثابت کرده­ایم. تمامی محاسبات با نرم افزار میپل صورت گرفته است. تفاصيل المقالة -
حرية الوصول المقاله
6 - Mathematical modelling of Sisko fluid flow through a stenosed artery
AR. ‎Haghighi‎ S. Asadi ‎chalak‎In the present study, the nonlinear model of non-Newtonian blood flow in cosine-shape stenosed elastic artery is numerically examined. The model is carried out for axisymmetric, two-dimensional and fully developed blood flow. The vessel wall is assumed to be have time-d أکثرIn the present study, the nonlinear model of non-Newtonian blood flow in cosine-shape stenosed elastic artery is numerically examined. The model is carried out for axisymmetric, two-dimensional and fully developed blood flow. The vessel wall is assumed to be have time-dependent radius that is important factor for study of blood flow. The cosine-shape stenosis convert to rigid artery by using a appropriate coordinate transformation and closed form solutions are discovered. The Sisko non-Newtonian fluid model is used for discribing blood rheology. The Navier-stokes equations of momentom containing pulastic pressure gradient. The resulting explicit of the governing nonlinear equations have been obtained numerically with the help of the finite differece scheme and Matlab program. The key dynamic parametrs similar resistance impedance, velocity profiles and the volumetric flow rate are studied. The influence of non-Newtonian rheological properties of unsteady blood flow and stenosis severity are found and computer modeling and simulation shown ‎graphically. تفاصيل المقالة -
حرية الوصول المقاله
7 - The Solution of Coupled Nonlinear Burgers' Equations Using Interval Finite-difference Method
M. Norouzi‎ H. Saberi NajafiIn this paper an coupled Burgers' equation is considered and then a method entitled interval finite-difference method is introduced to find the approximate interval solution of interval model in level wise cases. Finally for more illustration, the convergence theorem is أکثرIn this paper an coupled Burgers' equation is considered and then a method entitled interval finite-difference method is introduced to find the approximate interval solution of interval model in level wise cases. Finally for more illustration, the convergence theorem is confirmed and a numerical example is solved. تفاصيل المقالة -
حرية الوصول المقاله
8 - Stress Wave Propagation in 2D Functionally Graded Media: Optimization of Materials Distribution
Parham Rajabi Hossein Rahmani Alireza AmiriIn this paper, the analysis and optimization of the effect of the materials distribution on the behavior of 2D functionally graded media subjected to impacted loading has been investigated. First, it is assumed that there are two cases for distributing the components in أکثرIn this paper, the analysis and optimization of the effect of the materials distribution on the behavior of 2D functionally graded media subjected to impacted loading has been investigated. First, it is assumed that there are two cases for distributing the components in the FG material. In the first case, the power law is considered for materials distribution, and in the second case, the volume fractional changes of the components are made by third degree interpolation. Considering the elastodynamic behavior of the FG materials under loading, the general governing equations of the wave propagation are extracted for the case of properties variation in two dimensions and then the equations are solved using the finite difference method. Finally, an optimization has been made using a single objective genetic algorithm. The results show that the materials distribution has a considerable effect of stress wave propagation in FGMs. تفاصيل المقالة -
حرية الوصول المقاله
9 - Finite Difference Method for Biaxial and Uniaxial Buckling of Rectangular Silver Nanoplates Resting on Elastic Foundations in Thermal Environments Based on Surface Stress and Nonlocal Elasticity Theories
M karimi A.R ShahidiIn this article, surface stress and nonlocal effects on the biaxial and uniaxial buckling of rectangular silver nanoplates embedded in elastic media are investigated using finite difference method (FDM). The uniform temperature change is utilized to study thermal effect أکثرIn this article, surface stress and nonlocal effects on the biaxial and uniaxial buckling of rectangular silver nanoplates embedded in elastic media are investigated using finite difference method (FDM). The uniform temperature change is utilized to study thermal effect. The surface energy effects are taken into account using the Gurtin-Murdoch’s theory. Using the principle of virtual work, the governing equations considering small scale for both nanoplate bulk and surface are derived. The influence of important parameters including, the Winkler and shear elastic moduli, boundary conditions, in-plane biaxial and uniaxial loads, and width-to-length aspect ratio, on the surface stress effects are also studied. The finite difference method, uniaxial buckling, nonlocal effect for both nanoplate bulk and surface, silver material properties, and below-mentioned results are the novelty of this investigation. Results show that the effects of surface elastic modulus on the uniaxial buckling are more noticeable than that of biaxial buckling, but the influences of surface residual stress on the biaxial buckling are more pronounced than that of uniaxial buckling. تفاصيل المقالة -
حرية الوصول المقاله
10 - Alternating Direction Explicit Method for a Nonlinear Model in Finance
Sima MashayekhiIn this article, at first standard linear Black-Scholes model and then some nonlinear Black-Scholes models will be considered and thereupon alternating direction explicit (ADE) method is applied firstly for solving the standard Black-Scholes model and then for Barles an أکثرIn this article, at first standard linear Black-Scholes model and then some nonlinear Black-Scholes models will be considered and thereupon alternating direction explicit (ADE) method is applied firstly for solving the standard Black-Scholes model and then for Barles and Soner model which is one of the most complete and comprehensive nonlinear Black-Scholes models. Furthermore, the stability of this method has been considered and its accuracy will be compared with other numerical methods such as finite difference methods. Since in solving nonlinear Black-Scholes models by the ADE methods, we need to solve only some scalar nonlinear equations instead of a full nonlinear system of equations that we should solve in implicit methods, so this method can be a suitable choice for solving such models. تفاصيل المقالة -
حرية الوصول المقاله
11 - Approximate solution of nonlinear fractional order model of HIV infection of CD4+T via Differential Quadrature Radial Basis Functions technique
کوکب چلمبری حمیده ابراهیمی زینب آیاتیIn this research, differential quadrature radial basis functions Method is performed to a fractional order model of HIV infection of CD4+T. Here, Caputo fractional derivative is used and it is approximated by forward finite difference method. Results have been compared أکثرIn this research, differential quadrature radial basis functions Method is performed to a fractional order model of HIV infection of CD4+T. Here, Caputo fractional derivative is used and it is approximated by forward finite difference method. Results have been compared with the results of Laplace Adomian decomposition method (LADM), Laplace Adomian decomposition method-pade (LADM-pade), Runge-Kutta, Variational iteration method (VIM) and Variational iteration method-pade (VIM-Pade) for α_1=α_2=α_3 and residual functions have been plotted. And also approximate solutions of suggested method for different order of fractional derivatives have been shown. تفاصيل المقالة -
حرية الوصول المقاله
12 - مدلی برای قیمت گذاری سواپ زلزله و تحلیل حساسیت آن در ایران
نصرالله محمودپور عبدالساده نیسی مسلم پیمانیافزایش خسارتهای اقتصادی ناشی از وقایع طبیعی طی سالهای اخیر، یکی از بزرگترین چالشهای پیش روی صنعت بیمه و پژوهشگران برای یافتن ابزارهای نوین مالی جهت انتقال ریسک فجایع و کاهش زیانهای اقتصادی میباشد. در این مقاله مدلی برای قیمتگذاری سواپ فاجعه با نوسان خسارت ثابت جه أکثرافزایش خسارتهای اقتصادی ناشی از وقایع طبیعی طی سالهای اخیر، یکی از بزرگترین چالشهای پیش روی صنعت بیمه و پژوهشگران برای یافتن ابزارهای نوین مالی جهت انتقال ریسک فجایع و کاهش زیانهای اقتصادی میباشد. در این مقاله مدلی برای قیمتگذاری سواپ فاجعه با نوسان خسارت ثابت جهت کاهش ریسک شرکتهای بیمه و بیمه اتکایی در ایران ارائه می شود، طرح تحقیق گذشتهنگر و تحقیق کاربردی است، روش گردآوری دادها کتابخانهای و ابزار استفاده از اسناد و مدارک مورد بهرهبرداری قرار میگیرد، برای استخراج کل دادهها از روش همبستگی استفاده می شود و تمام شماری خسارت کل زلزلههای دارای تلفات، مخرب و تاثیرگذار در بازه زمانی 1288 الی 1397 در ایران مورد بررسی قرار گرفته است. احتمال وقوع و شدت خسارت ثابت و به صورت یک حرکت براونی پرش انتشار در نظر گرفته می شود، مدل دیفرانسیلی، انتگرالی استخراج شده با گسسته سازی به مدل دیفرانسیل معمولی تبدیل شده و با روش تفاضل محدود و نرم ابزار متلب جوابها تخمین زده میشود، تغییرات مدل ارائه شده با تحلیل حساسیت لاندا مورد بررسی قرار می گیرد و سرانجام با دادههای واقعی خسارت های زلزله در ایران، که از پایگاه داده ئی ام دات دیتا بیس و نتایج رگرسیون استخراج شده است، مدل اجرا میشود. بر اساس نتایج تحقیق قیمت اوراق سواپ فاجعه به ازای خسارت کمتر از آستانه ، روند افزایشی منظمی دارد، اما به محض رسیدن و رد شدن خسارت از آستانه، قیمت ها به شدت کاهش خواهند یافت تفاصيل المقالة -
حرية الوصول المقاله
13 - A New Implicit Finite Difference Method for Solving Time Fractional Diffusion Equation
elham afshariIn this paper, a time fractional diffusion equation on a finite domain is con- sidered. The time fractional diffusion equation is obtained from the standard diffusion equation by replacing the first order time derivative by a fractional derivative of order 0 < a< أکثرIn this paper, a time fractional diffusion equation on a finite domain is con- sidered. The time fractional diffusion equation is obtained from the standard diffusion equation by replacing the first order time derivative by a fractional derivative of order 0 < a< 1 (in the Riemann-Liovill or Caputo sence). In equation that we consider the time fractional derivative is in the Caputo sense. We propose a new finite difference method for solving time fractional diffu- sion equation. In our method firstly, we transform the Caputo derivative into Riemann-Liovill derivative. The stability and convergence of this method are investigated by a Fourier analysis. We show that this method is uncondition- ally stable and convergent with the convergence order O( 2+h2), where t and h are time and space steps respectively. Finally, a numerical example is given that confirms our theoretical analysis and the behavior of error is examined to verify the order of convergence. تفاصيل المقالة -
حرية الوصول المقاله
14 - A Consistent and Accurate Numerical Method for Approximate Numerical Solution of Two Point Boundary Value Problems
Pramod PandeyIn this article we have proposed an accurate finite difference method for approximate numerical solution of second order boundary value problem with Dirichlet boundary conditions. There are numerous numerical methods for solving these boundary value problems. Some these أکثرIn this article we have proposed an accurate finite difference method for approximate numerical solution of second order boundary value problem with Dirichlet boundary conditions. There are numerous numerical methods for solving these boundary value problems. Some these methods are more efficient and accurate than others with some advantages and disadvantages. The results in experiment on model problems show an improved and good approximation to the solution of considered problems. تفاصيل المقالة -
حرية الوصول المقاله
15 - HALL AND LON-SLIP EFFECTS ON MAGNETO-MICROPOLAR FLUID WITH COMBINED FORCED AND FREE CONVECTION IN BOUNDARY LAYER FLOW OVER A HORIZONTAL PLATE WITH VISCOUS DISSIPATION
G. Deepa N. KishanIn this paper, we study the effects of Hall and ion-slip currents on the steady magneto-micropolar of a viscous incompressible and electrically conducting fluid over a horizontal plate by taking in to account the viscous dissipation effects. By means of similarity solut أکثرIn this paper, we study the effects of Hall and ion-slip currents on the steady magneto-micropolar of a viscous incompressible and electrically conducting fluid over a horizontal plate by taking in to account the viscous dissipation effects. By means of similarity solutions, deviation of fundamental equations on the assumption of small magnetic Reynolds number are solved numerically by using quasilinearised first and finite difference method. The effects of various parameters of the problem, e.g. the magnetic parameter, Hall parameter, ion- slip parameter, buoyancy parameter and material parameter and Eckert number are discussed and shown graphically. تفاصيل المقالة -
حرية الوصول المقاله
16 - A CYCLONE INDUCED STORM SURGE FORECASTING MODEL FOR THE COAST OF BANGLADESH WITH APPLICATION TO THE CYCLONE `SIDR'
M. Mizanur Rahman G. Chandra Paul A. HoqueThe coast of Bangladesh has a specialty in terms of high bending and many off- shore islands. Incorporation of the coastline and island boundaries properly in the numerical scheme is essential for accurate estimation of water levels due to surge. For that purpose a numer أکثرThe coast of Bangladesh has a specialty in terms of high bending and many off- shore islands. Incorporation of the coastline and island boundaries properly in the numerical scheme is essential for accurate estimation of water levels due to surge. For that purpose a numerical scheme consisting of very fine mesh is required along the coastal belt, whereas this is unnecessary away from the coast. In this study, a fine mesh scheme covering the coastal belt and islands has been nested into a coarse mesh scheme covering up to 15 N latitude in the Bay of Bengal. For the existence of so many small and big islands and also for high bending of the coastline along the Meghna estuary, a very fine mesh scheme for the region between Barisal and Chittagong is again nested into the fine mesh scheme. A vertically integrated model is developed in Cartesian coordinate system to solve the shallow water equations using semi- implicit finite difference technique for computing surge associated with storms. The developedsystem is applied on a severe cyclonic storm ’SIDR’ that hit Bangladesh on 15th November, 2007. The computed water levels are found to be in good agreement with those observed. تفاصيل المقالة -
حرية الوصول المقاله
17 - Static analysis of guyed tower regarding cable sagging by using finite difference model
Kaveh Kumarci Alireza BaharizadehThe static analysis of guyed towers is very complex because of high degree of non-linearity they exhibit due to their slender and flexibility. In the static analysis of cable systems, due to the effects of nonlinearity of loading and large functions, the interference of أکثرThe static analysis of guyed towers is very complex because of high degree of non-linearity they exhibit due to their slender and flexibility. In the static analysis of cable systems, due to the effects of nonlinearity of loading and large functions, the interference of loads and displacement have no much value. Because of having no analytical solution for these systems, numerical methods have been applied. Finite difference method (FDM) is one of the known methods which are directly related to nonlinear relative equations and, the cable system is defined using calculating of them and deformation equations . In this research, the non-linear analysis of cables under three dimension static loads is analyses using FDM. This model can be analyzed three dimension response of cable using sequential method. In this model, long and inclined pre-tensioned cables have been studied in which only axial stiffness of cable is considered while bending and torsion stiffness are assumed to be negligible. تفاصيل المقالة