A

  • Abachi.Davod A Hierarchical Production Planning and Finite Scheduling Framework for Part Families in Flexible Job-shop (with a case study) [ Vol.6, Issue 12 - Spring Year 2013]
  • Abbasi.Babak Using neural network to estimate weibull parameters [ Vol.1, Issue 1 - Autumn Year 2008]
  • Abbasi.Babak A Simulated Annealing Algorithm for Multi Objective Flexible Job Shop Scheduling with Overlapping in Operations [ Vol.3, Issue 5 - Spring Year 2010]
  • Abbasi.Babak Process Capability Analysis in the Presence of Autocorrelation [ Vol.6, Issue 12 - Spring Year 2013]
  • Abbasi.Babak Process Capability Analysis in the Presence of Autocorrelation [ Vol.4, Issue 9 - Autumn Year 2011]
  • Abbasimehr.Hossein Integrating AHP and data mining for effective retailer segmentation based on retailer lifetime value [ Vol.5, Issue 11 - Autumn Year 2012]
  • Abd Elwahed.Hamiden On characterizing efficient and properly efficient solutions for multi- objective programming problems in a complex space [ Vol.16, Issue 2 - Autumn Year 2023]
  • abdi.farid A Hybrid Method Based on Fuzzy AHP and VIKOR for the Discrete Time-Cost-Quality Trade-off Problem [ Vol.9, Issue 19 - Spring Year 2016]
  • Abdollahi sharbabaki.reza Presenting a Joint Replenishment-location Model Under all-units Quantity Discount and Solving by Genetic Algorithm and Harmony Search Algorithm [ Vol.13, Issue 1 - Spring Year 2020]
  • Abdolvand.Mahsa Organizational Competitive Advantage Analysis using SWOT Matrix and Hybrid Approach of Fuzzy-DEMATEL, ANP, and DEA [ Vol.17, Issue 1 - Spring Year 2024]
  • Abdul Haq.Reazul Haq Analysis of Factors that Influence Automobile Workshop Queue Performance Using Design of Experiments [ Vol.16, Issue 2 - Autumn Year 2023]
  • Abdul Khalid.Fararishah Determining The Relationship Between Adoption Factors of P3 Sweetener through Partial Least Squares Structural Equation Modeling Approach [ Vol.15, Issue 2 - Autumn Year 2022]
  • Abdul Rani.Nazatul Shima Investigating Basic Requirement Regulations, Internal Environment, and their Impact on Performance of Retirement Homes [ Vol.15, Issue 2 - Autumn Year 2022]
  • Abdul Wahab.Mohamad Ikbar Critical success factors for implementation of quality improvement initiative [ Vol.16, Issue 1 - Spring Year 2023]
  • Abdul Wahab.Mohamad Ikbar Types of welding process and relationship with defective rate in structural fabrication for oil & gas project [ Vol.16, Issue 1 - Spring Year 2023]
  • Abdul Wahab.Mohamad Ikbar The barriers and critical success factor for implementing lean manufacturing at SMEs [ Vol.16, Issue 1 - Spring Year 2023]
  • Abdul Wahab.Mohamad Ikbar The impact of work from home on productivity among manufacturing industry workers during MCO [ Vol.16, Issue 1 - Spring Year 2023]
  • Abdulhadi.Mohammed Assessment of Wind Energy Potential in Green-Mountain, Libya [ Vol.16, Issue 2 - Autumn Year 2023]
  • Abedi.sadegh Using Markov Chain to Analyze Production Lines Systems with Layout Constraints [ Vol.2, Issue 3 - Summer Year 2009]
  • Abedian.Mansour Determining the Best Combination of Perspective indicators of Balanced Scorecard by using Game Theory [ Vol.14, Issue 1 - Spring Year 2021]
  • Aberdi.Sadegh Fuzzy model of hesitant decision making in evaluating business plans under uncertainty (an approach to developing new products) [ Vol.16, Issue 2 - Autumn Year 2023]
  • Abuselidze.George Marketing Aspects of the Key Issues of Agricultural Machinery in the Industrial Enterprises [ Vol.15, Issue 1 - Spring Year 2022]
  • Acharya.Milu An EOQ Model for Defective Items Under Pythagorean Fuzzy Environment [ Vol.15, Issue 1 - Spring Year 2022]
  • Achebo.Joseph Optimization of the Ductile Properties of an Arc Welded Plate Based on the Yield Strength, Elongation and Modulus of Elasticity. [ Vol.14, Issue 1 - Spring Year 2021]
  • Adibi.Mohammad Amin Identifying and Evaluating Effective Factors in Green Supplier Selection using Association Rules Analysis [ Vol.14, Issue 2 - Autumn Year 2021]
  • Admojoa.Dwi Application of Business Intelligent System in the Realm of Knowledge Distribution to Employees [ Vol.16, Issue 2 - Autumn Year 2023]
  • Adrang.Rohoullah Planning for Medical Emergency Transportation Vehicles during Natural Disasters [ Vol.13, Issue 2 - Autumn Year 2020]
  • Afshar nadjafi.behrouz Using neural network to estimate weibull parameters [ Vol.1, Issue 1 - Autumn Year 2008]
  • Afshar nadjafi.Behrouz A Multi Objective Fibonacci Search Based Algorithm for Resource Allocation in PERT Networks [ Vol.3, Issue 6 - Autumn Year 2010]
  • Afshar nadjafi.Behrouz The preemptive resource-constrained project scheduling problem subject to due dates and preemption penalties: An integer programming approach [ Vol.1, Issue 1 - Autumn Year 2008]
  • Afshar nadjafi.Behrouz An Exact Algorithm for the Mode Identity Project Scheduling Problem [ Vol.5, Issue 10 - Spring Year 2012]
  • Aghaei Fishani.Behzad Developing a Fuzzy Green Supply Chain Management Problem Considering Location Allocation Routing Problem: Hybrid Meta-Heuristic Approach [ Vol.15, Issue 1 - Spring Year 2022]
  • Aghaie.Abdollah Determination of Criticality Indexes in the Remanufacturing Process: A GERT-based Simulation Approach [ Vol.11, Issue 2 - Autumn Year 2018]
  • Aghamiri.Seyed Mohammad Amin Developing a Framework for Analyzing the Causes of Corruption [ Vol.15, Issue 1 - Spring Year 2022]
  • Ahadi.Mohammad A Combined Fuzzy Logic and Analytical Hierarchy Process Method for Optimal Selection and Locating of Pedestrian Crosswalks [ Vol.11, Issue 2 - Autumn Year 2018]
  • Ahamat.Amiruddin Absorptive Capacity Effects on the Relationship between Foreign Direct Investment and Economic Growth in Malaysia [ Vol.16, Issue 2 - Autumn Year 2023]
  • Ahmad.Abd Rahman The elimination of plastic bags: A customer perspective on logistics challenges [ Vol.15, Issue 2 - Autumn Year 2022]
  • Ahmad.Abd Rahman Investigation of Customer Purchase Intention towards Car Battery On-Site Delivery Services [ Vol.15, Issue 2 - Autumn Year 2022]
  • ahmadi.hassan Relationship between Business Intelligence Components and Financial Reporting Quality in Firms [ Vol.14, Issue 2 - Autumn Year 2021]
  • ahmadian.saeed Identifying the Factors Affecting Consumer Perceptions on Product Safety and Model Presentation (Case study: Home Appliances Consumers) [ Vol.15, Issue 1 - Spring Year 2022]
  • Ahmed.Saeed Optimization Planning Model for Carbon Dioxide Emissions Reduction Via Renewable Energy Switch in a Coal Power Station [ Vol.15, Issue 2 - Autumn Year 2022]
  • Akbarian-Saravi.niloofar A bi-objective mathematical model for the patient appointment scheduling problem in outpatient chemotherapy clinics using Fuzzy C-means clustering: A case study [ Vol.15, Issue 2 - Autumn Year 2022]
  • Akhavan Niaki.S.T. A Hybrid Meta-Heuristic Method to Optimize Bi-Objective Single Period Newsboy Problem with Fuzzy Cost and Incremental Discount [ Vol.2, Issue 3 - Summer Year 2009]
  • Akhavan Niaki.S.T. A Review and Evaluation of Statistical Process Control Methods in Monitoring Process Mean and Variance Simultaneously [ Vol.1, Issue 1 - Autumn Year 2008]
  • Akhavan Niaki.S.T. Absorbing Markov Chain Models to Determine Optimum Process Target Levels in Production Systems with Rework and Scrapping [ Vol.3, Issue 6 - Autumn Year 2010]
  • Akhavan Niaki.S.T. Vendor Managed Inventory of a Supply Chain under Stochastic Demands [ Vol.8, Issue 18 - Autumn Year 2015]
  • Akhavan Niaki.S.T. Availability analysis of a cooking oil production line [ Vol.14, Issue 1 - Spring Year 2021]
  • Akhavan Niaki.S.T. Exact equations for the reliability and mean time to failure of 1-out-of-n cold-standby system with imperfect switching [ Vol.14, Issue 2 - Autumn Year 2021]
  • Akhavan Niaki.S.T. An Efficient Economic-Statistical Design of Simple Linear Profiles Using a Hybrid Approach of Data Envelopment Analysis, Taguchi Loss Function, and MOPSO [ Vol.13, Issue 1 - Spring Year 2020]
  • Akhavan Niaki.S.T. A Risk-averse Inventory-based Supply Chain Protection Problem with Adapted Stochastic Measures under Intentional Facility Disruptions: Decomposition and Hybrid Algorithms [ Vol.13, Issue 2 - Autumn Year 2020]
  • Akhavan Niaki.S.T. Phase-II Monitoring of AR (1) Autocorrelated Polynomial Profiles [ Vol.7, Issue 14 - Spring Year 2014]
  • Akhavan Niaki.S.T. A Comparative Study of Four Evolutionary Algorithms for Economic and Economic-Statistical Designs of MEWMA Control Charts [ Vol.4, Issue 9 - Autumn Year 2011]
  • Akhavan Niaki.S.T. A New Uni-attribute Control Chart to Monitor the Number of Nonconformities [ Vol.6, Issue 12 - Spring Year 2013]
  • Akhavan Niaki.S.T. An Integrated Model of Project Scheduling and Material Ordering: A Hybrid Simulated Annealing and Genetic Algorithm [ Vol.5, Issue 10 - Spring Year 2012]
  • Akhbari.Mohsen VMI-type Supply Chains: a Brief Review [ Vol.7, Issue 14 - Spring Year 2014]
  • alaghebandha.mohammad A Continuous Review inventory Control Model within Batch Arrival Queuing Framework: A Parameter-Tuned Imperialist Competitive Algorithm [ Vol.5, Issue 11 - Autumn Year 2012]
  • alaghebandha.mohammad Economic Lot Sizing and Scheduling in Distributed Permutation Flow Shops [ Vol.12, Issue 1 - Spring Year 2019]
  • Alamtabrizb.akbar A system Dynamics Approach to Designing a Crowdfunding Model in Technological Entrepreneurship Ecosystem with a Focus on Technology Incubator Centers [ Vol.13, Issue 1 - Spring Year 2020]
  • Alborzi.Mahmood Residential appliance clustering based on their inherent characteristics for optimal use based K-means and hierarchical clustering method [ Vol.16, Issue 1 - Spring Year 2023]
  • Alborzi.Mahmood A New Model Representation for Road Mapping in Emerging Sciences: A Case Study on Roadmap of Quantum Computing [ Vol.13, Issue 2 - Autumn Year 2020]
  • Alburaikan.Alhanouf On characterizing efficient and properly efficient solutions for multi- objective programming problems in a complex space [ Vol.16, Issue 2 - Autumn Year 2023]
  • Alcelay.Mikel Machine scheduling for multitask machining [ Vol.13, Issue 2 - Autumn Year 2020]
  • ALFALAHI.SAAD TAHA YASEEN Assessment of Wind Energy Potential in Green-Mountain, Libya [ Vol.16, Issue 2 - Autumn Year 2023]
  • Alfi.Shohreh A Dynamic Model for Assessing the Sustainability of Small and Medium Sized Enterprises [ Vol.17, Issue 2 - Autumn Year 2024]
  • ali akbari.ali A Game Theoretical Approach to Optimize Policies of Government Under the Cartel of Two Green and Non-green Supply Chains [ Vol.12, Issue 2 - Autumn Year 2019]
  • ALI.RAFIDAH A Comparative Simulation Study of Nonlinear Time Series Model for Forecasting Tourism Data [ Vol.16, Issue 2 - Autumn Year 2023]
  • Ali.Shahzad Work-related stress and psychosocial problems among shift workers: a case study on pakistan railway Lahore, pakistan [ Vol.16, Issue 1 - Spring Year 2023]
  • Aliabadi.Leyla A Multi-objective Mixed Model Two-sided Assembly Line Sequencing Problem in a Make –To- Order Environment with Customer Order Prioritization [ Vol.12, Issue 2 - Autumn Year 2019]
  • Aliakbari.Abolfazl A Supplier Selection Model for Social Responsible Supply Chain [ Vol.4, Issue 8 - Summer Year 2011]
  • Aliheidari.Tahere Implementing Bounded Linear Programming and Analytical Network Process Fuzzy Models to Motivate Employees: a Case Study [ Vol.11, Issue 2 - Autumn Year 2018]
  • alinezhad.alireza Organizational Competitive Advantage Analysis using SWOT Matrix and Hybrid Approach of Fuzzy-DEMATEL, ANP, and DEA [ Vol.17, Issue 1 - Spring Year 2024]
  • Alipour Darvish.Zahra Providing an Optimal Model of Affective Attitude in Customers' Purchasing Decisions in Industrial Markets [ Vol.15, Issue 1 - Spring Year 2022]
  • Alipuor.Hossin Fuzzy Mathematical Model For A Lot-Sizing Problem In Closed-Loop Supply Chain [ Vol.11, Issue 1 - Spring Year 2018]
  • Alsaad.Abdulaziz Abdulrahman The effect of TQM practices on job satisfaction in higher education institutes. A systematic literature review from the last two decades [ Vol.16, Issue 1 - Spring Year 2023]
  • Alwatar.Sabah Assessment of Wind Energy Potential in Green-Mountain, Libya [ Vol.16, Issue 2 - Autumn Year 2023]
  • Amindoust.Atefeh Determining the Best Combination of Perspective indicators of Balanced Scorecard by using Game Theory [ Vol.14, Issue 1 - Spring Year 2021]
  • Aminuddin Jafry.Nurul Hanis Modelling Malaysia stock markets using GARCH, EGARCH and copula models [ Vol.15, Issue 2 - Autumn Year 2022]
  • amir.seyed amir Failure Mode and Effect Analysis using Robust Data Envelopment Analysis (Case Study: Automobile Oil Filter) [ Vol.15, Issue 2 - Autumn Year 2022]
  • Amiri.Amirhossein Phase-II Monitoring of AR (1) Autocorrelated Polynomial Profiles [ Vol.7, Issue 14 - Spring Year 2014]
  • Amiri.Amirhossein A New Method for Diagnosing Patients Suspected of Bone Marrow Metastasis in the Presence of Outliers [ Vol.15, Issue 1 - Spring Year 2022]
  • Amiri.Maghsoud A New Dynamic Random Fuzzy DEA Model to Predict Performance of Decision Making Units [ Vol.9, Issue 20 - Autumn Year 2016]
  • Amiri.Maghsoud Estimation of the cost function of a two-echelon inventory system with lost sales using regression [ Vol.1, Issue 1 - Autumn Year 2008]
  • Amiri.Maghsoud Meta-heuristic Algorithms for an Integrated Production-Distribution Planning Problem in a Multi-Objective Supply Chain [ Vol.6, Issue 12 - Spring Year 2013]
  • Amiri.Mohsen An Integrated Approach for Facility Location and Supply Vessel Planning with Time Windows [ Vol.12, Issue 1 - Spring Year 2019]
  • anak Lambat.Elsa Cordelia A Community-Based Qualitative Vulnerability Assessment Tools for Rivers in Developing Participatory Response to Land-Use Changes [ Vol.17, Issue 1 - Spring Year 2024]
  • Andrew-Munot.Magdalene Performance Analysis of Remanufacturing System Considering Inspection & Grading Policies, Sourcing Policies and Resource Policies Under Multiple Quality Scenarios: Towards Environmental Sustainability [ Vol.15, Issue 2 - Autumn Year 2022]
  • Andrusiv.Uliana Economic Growth of Regions of Ukraine in Conditions of Disproportional Regional Development [ Vol.15, Issue 1 - Spring Year 2022]
  • Anis Hosseini.Farzaneh A new approach to solving multi-follower multi-objective linear bilevel programming problems [ Vol.16, Issue 1 - Spring Year 2023]
  • Areewong.Kwanchanok The survey of lean implementation maturity level of hospitals in Thailand: Does the hospital type matter? [ Vol.17, Issue 1 - Spring Year 2024]
  • Arif.Jabir Towards mathematical modeling for selecting logistics service providers: case of moroccan LSP [ Vol.16, Issue 1 - Spring Year 2023]
  • Arjmand.Azadeh A Regret Minimization Approach in Product Portfolio Management with respect to Customers’ Price-sensitivity [ Vol.12, Issue 1 - Spring Year 2019]
  • arkat.jamal Healthcare Districting Optimization Using Gray Wolf Optimizer and Ant Lion Optimizer Algorithms (case study: South Khorasan Healthcare System in Iran) [ Vol.12, Issue 1 - Spring Year 2019]
  • Arya.Somvir Behaviour of Individuals towards E-Waste Management in India [ Vol.13, Issue 2 - Autumn Year 2020]
  • Asadi.Amin A Two-dimensional Warranty Model with Consideration of Customer and Manufacturer Objectives Solved with Non-dominated Sorting Genetic Algorithm [ Vol.12, Issue 1 - Spring Year 2019]
  • asadian.nima Investigating the Effect of Product Packaging Design on Attracting Customers about Cosmetic Products with Conjoint Analysis Method [ Vol.15, Issue 1 - Spring Year 2022]
  • Asadi-Gangraj.Ebrahim Scheduling on flexible flow shop with cost-related objective function considering outsourcing options [ Vol.14, Issue 2 - Autumn Year 2021]
  • Asadi-Zonouz.Moein A Hybrid Unconscious Search Algorithm for Mixed-model Assembly Line Balancing Problem with SDST, Parallel Workstation and Learning Effect [ Vol.13, Issue 2 - Autumn Year 2020]
  • Asadollahi.Abulfazl Developing a New Bi-Objective Functions Model for a Hierarchical Location-Allocation Problem Using the Queuing Theory and Mathematical Programming [ Vol.12, Issue 2 - Autumn Year 2019]
  • Asghari.Mohammad Fuzzy Programming for Parallel Machines Scheduling: Minimizing Weighted Tardiness/Earliness and Flow Time through Genetic Algorithm [ Vol.7, Issue 14 - Spring Year 2014]
  • Ashayeri.Jalal Humanitarian Smart Supply Chain: Classification and New Trends for Future Research [ Vol.16, Issue 2 - Autumn Year 2023]
  • Ashouri sheikhi.Elham Studying and Identifying the Effective Factors on Tax Evasion by Fuzzy DEMATEL-Method [ Vol.11, Issue 2 - Autumn Year 2018]
  • Askari.Arezoo A Multi-Objective Mixed-Model Assembly Line Sequencing Problem With Stochastic Operation Time [ Vol.11, Issue 1 - Spring Year 2018]
  • Aslani Khiavi.Sajjad The Design of Inverse Network DEA Model for Measuring the Bullwhip Effect in Supply Chains with Uncertain Demands [ Vol.14, Issue 1 - Spring Year 2021]
  • ASTRIANI.FITRI Determination of Motivation, Work Environment, and Work Communication on Performance Through Competence at the Public Health Centers in Batam City [ Vol.16, Issue 2 - Autumn Year 2023]
  • Atashi Abkenar.Amir Aydin Fuzzy Mathematical Model For A Lot-Sizing Problem In Closed-Loop Supply Chain [ Vol.11, Issue 1 - Spring Year 2018]
  • Avakh Darestani.Soroush Developing Fuzzy Tool Capability Measurement System Analysis [ Vol.14, Issue 1 - Spring Year 2021]
  • Avakh Darestani.Soroush Bi-objective Optimization of a Multi-product multi-period Fuzzy Possibilistic Capacitated Hub Covering Problem: NSGA-II and NRGA Solutions [ Vol.13, Issue 2 - Autumn Year 2020]
  • Avakh Darestani.Soroush A Multi-Objective Fuzzy Approach to Closed-Loop Supply Chain Network Design with Regard to Dynamic Pricing [ Vol.12, Issue 1 - Spring Year 2019]
  • Avakh Darestani.Soroush Developing a Transfer Point Location Problem Considering Normal Demands Distribution [ Vol.15, Issue 1 - Spring Year 2022]
  • Awang.Mazlan Critical success factors for implementation of quality improvement initiative [ Vol.16, Issue 1 - Spring Year 2023]
  • ayeen.somayyeh A model for determining optimum process mean in the presence of inspection errors by considering the cycle time [ Vol.15, Issue 2 - Autumn Year 2022]
  • Azab.Ahmed Machine scheduling for multitask machining [ Vol.13, Issue 2 - Autumn Year 2020]
  • Azadnia.Amir Hossein An Integrated Approach of Fuzzy Quality Function Deployment and Fuzzy Multi-Objective Programming Tosustainable Supplier Selection and Order Allocation [ Vol.11, Issue 1 - Spring Year 2018]
  • Azim Mohseni.Naser Direct Optimal Motion Planning for Omni-directional Mobile Robots under Limitation on Velocity and Acceleration [ Vol.10, Issue 22 - Autumn Year 2017]
  • Azis.Anton How does the Coffee Supply Chain Work in Indonesia? [ Vol.16, Issue 2 - Autumn Year 2023]
  • Azizi.Hossein Measuring the overall performances of decision-making units in the presence of imprecise data [ Vol.5, Issue 11 - Autumn Year 2012]
  • Azizi.Roza A Ratio-Based Efficiency Measurement for Ranking Multi-Stage Production Systems in DEA [ Vol.11, Issue 1 - Spring Year 2018]
  • Azizi.Roza Efficiency evaluation of wheat farming: a network data envelopment analysis approach [ Vol.9, Issue 20 - Autumn Year 2016]
  • Azizian.Hadi Sizing optimization of truss structures with discrete design variables using combined PSO algorithm with Special Particles Method [ Vol.16, Issue 2 - Autumn Year 2023]
  • Azzouz.Khaoula Towards mathematical modeling for selecting logistics service providers: case of moroccan LSP [ Vol.16, Issue 1 - Spring Year 2023]

B

  • babaei.elham Determination of Criticality Indexes in the Remanufacturing Process: A GERT-based Simulation Approach [ Vol.11, Issue 2 - Autumn Year 2018]
  • Babaei.Rashin An inventory lot Sizing model of deteriorating items with time and price dependent demand, by considering the time value of money [ Vol.17, Issue 1 - Spring Year 2024]
  • Babenko.Vitalina Business Restructuring as a Method of Strengtening Company’s Financial Position [ Vol.14, Issue 3 - Summer Year 2021]
  • Badiee.Aghdas A Novel Model for the Analysis of Interactions Between Governments and Agricultures in a Study of Social Beneficial Externalities Based on the Stackelberg Game: A Case Study on Cotton Production [ Vol.11, Issue 2 - Autumn Year 2018]
  • Badrul Hisham.Aina Syuhada The elimination of plastic bags: A customer perspective on logistics challenges [ Vol.15, Issue 2 - Autumn Year 2022]
  • Bafandeganemroozi.vahideh Applying a multi-criteria group decision-making method in a probabilistic environment for supplier selection (Case study: Urban railway in Iran) [ Vol.16, Issue 1 - Spring Year 2023]
  • Bagheri.Masoud A Benders� Decomposition Approach for Dynamic Cellular Manufacturing System in the Presence of Unreliable Machines [ Vol.8, Issue 17 - Spring Year 2015]
  • Bagherighadikolaei.SeyedehPardis A Data Mining approach for forecasting failure root causes: A case study in an Automated Teller Machine (ATM) manufacturing company [ Vol.13, Issue 2 - Autumn Year 2020]
  • Bagherinejad.jafar Optimizing investment of pumped hydro storage system for renewable energy future [ Vol.16, Issue 1 - Spring Year 2023]
  • Bagherinejad.jafar A Non-dominated Sorting Ant Colony Optimization Algorithm Approach to the Bi-objective Multi-vehicle Allocation of Customers to Distribution Centers [ Vol.9, Issue 19 - Spring Year 2016]
  • Bahramipour.Amir Fuzzy model of hesitant decision making in evaluating business plans under uncertainty (an approach to developing new products) [ Vol.16, Issue 2 - Autumn Year 2023]
  • bairamzadeh.samira Design of a Hybrid Genetic Algorithm for Parallel Machines Scheduling to Minimize Job Tardiness and Machine Deteriorating Costs with Deteriorating Jobs in a Batched Delivery System [ Vol.11, Issue 1 - Spring Year 2018]
  • BAKAR.MOHD HAFIZ Absorptive Capacity Effects on the Relationship between Foreign Direct Investment and Economic Growth in Malaysia [ Vol.16, Issue 2 - Autumn Year 2023]
  • Baki.Fazle Machine scheduling for multitask machining [ Vol.13, Issue 2 - Autumn Year 2020]
  • Banan.Mohammad Reza Effects of Probability Function on the Performance of Stochastic Programming [ Vol.11, Issue 1 - Spring Year 2018]
  • Bantelay.Dessie Analytical Modeling of Specific Energy Consumption and Cost Share in Comprehensive Textile Industry: Case Study of Ethiopia [ Vol.13, Issue 2 - Autumn Year 2020]
  • Bantelay.Dessie Investigating Water Supply System Electro-Mechanical Equipments Problems: A Case Study of Ethiopia [ Vol.12, Issue 2 - Autumn Year 2019]
  • Baradaran.Vahid An Evolutionary Algorithm Based on a Hybrid Multi-Attribute Decision Making Method for the Multi-Mode Multi-Skilled Resource-constrained Project Scheduling Problem [ Vol.12, Issue 2 - Autumn Year 2019]
  • Barghi Jond.Hossein Trajectory Planning Using High Order Polynomials under Acceleration Constraint [ Vol.10, Issue 21 - Spring Year 2017]
  • Baro.Manuel 6 sigma and dmaic method: basic tool teaching and application for beginning practitioners in automotive assembly [ Vol.16, Issue 1 - Spring Year 2023]
  • BARZINPOUR.FARNAZ A Mathematical Model for Multiple-Load AGVs in Tandem Layout [ Vol.13, Issue 1 - Spring Year 2020]
  • Baskaran.Shathees Investigation of Customer Purchase Intention towards Car Battery On-Site Delivery Services [ Vol.15, Issue 2 - Autumn Year 2022]
  • Bavandi.Salim A Fractile Model for Stochastic Interval Linear Programming Problems [ Vol.14, Issue 1 - Spring Year 2021]
  • bavarsad salehpoor.iman Constrained portfolio selection model at considering risk-adjusted measure by using the Genetic Network Programming [ Vol.17, Issue 2 - Autumn Year 2024]
  • Bazaee.Ghasemali Identifying the Factors Affecting Consumer Perceptions on Product Safety and Model Presentation (Case study: Home Appliances Consumers) [ Vol.15, Issue 1 - Spring Year 2022]
  • Becker.Till Multiple Items Supplier Selection, Economic Lot-sizing, and Order Allocation Under Quantity Discount: A Genetic Algorithm Approach [ Vol.16, Issue 2 - Autumn Year 2023]
  • Beheshti Fakher.Hossein Traffic Flow Analysis Based on Queuing Models [ Vol.2, Issue 2 - Spring Year 2009]
  • Behroozi.Foroogh Minimizing the operational costs in a flexible flow shop scheduling problem with unrelated parallel machines [ Vol.14, Issue 1 - Spring Year 2021]
  • BENABBOU.Rajaa Forecasting Seasonal and Trend-Driven Data: A Comparative Analysis of Classical Techniques [ Vol.16, Issue 2 - Autumn Year 2023]
  • Benboubker.Mohamed Badr Towards mathematical modeling for selecting logistics service providers: case of moroccan LSP [ Vol.16, Issue 1 - Spring Year 2023]
  • BENHRA.Jamal Forecasting Seasonal and Trend-Driven Data: A Comparative Analysis of Classical Techniques [ Vol.16, Issue 2 - Autumn Year 2023]
  • Benveniste.Rıfat Trajectory Planning Using High Order Polynomials under Acceleration Constraint [ Vol.10, Issue 21 - Spring Year 2017]
  • Berhan.Eshetie Service Performance Improvement Model: The Case of Teklehaymanot General Hospital [ Vol.11, Issue 1 - Spring Year 2018]
  • Berhan.Eshetie STOCHASTIC VEHICLE ROUTING PROBLEMS WITH SIMULTANEOUS PICKUP AND DELIVERY SERVICES [ Vol.9, Issue 19 - Spring Year 2016]
  • Beruk.Betelhem Analytical Modeling of Specific Energy Consumption and Cost Share in Comprehensive Textile Industry: Case Study of Ethiopia [ Vol.13, Issue 2 - Autumn Year 2020]
  • Beshah.Birhanu Knowledge Diffusion to Workplace Safety and Health Improvement [ Vol.10, Issue 21 - Spring Year 2017]
  • Beyene.Tsehaye Application of Failure Mode Effect Analysis (FMEA) for Efficient and Cost-effective Manufacturing: A Case Study at Bahir Dar Textile Share Company, Ethiopia [ Vol.12, Issue 1 - Spring Year 2019]
  • Bhardwaj.Arvind Behaviour of Individuals towards E-Waste Management in India [ Vol.13, Issue 2 - Autumn Year 2020]
  • Billal.Md Mashum Multi-Objective Optimization for Multi-Product Multi-Period Four Echelon Supply Chain Problems Under Uncertainty [ Vol.13, Issue 1 - Spring Year 2020]
  • Bilovodska.Olena Innovation Management of Enterprises: Legal Provision and Analytical Tools for Evaluating Business Strategies [ Vol.14, Issue 3 - Summer Year 2021]
  • Bilyk.Iryna Economic Growth of Regions of Ukraine in Conditions of Disproportional Regional Development [ Vol.15, Issue 1 - Spring Year 2022]
  • Bokhari.Norzella Occupational competency profile for workers in mechanical industry towards sustainable development [ Vol.16, Issue 1 - Spring Year 2023]
  • Bondarenko.Svitlana National Resilience As A Determinant Of National Security Of Ukraine [ Vol.14, Issue 3 - Summer Year 2021]
  • Bong.Charles Factors Affecting the Efficiency of Hydraulic Flushing in Storm System for Sedimentation Control: A Review [ Vol.15, Issue 2 - Autumn Year 2022]
  • Bonsa.Getachew Basa Multiple Items Supplier Selection, Economic Lot-sizing, and Order Allocation Under Quantity Discount: A Genetic Algorithm Approach [ Vol.16, Issue 2 - Autumn Year 2023]
  • bostani.yaser A New Fuzzy controller for Damping of Sub Synchronous Resonance (SSR) in the modified IEEE First Bench Mark [ Vol.15, Issue 2 - Autumn Year 2022]
  • Boyer Hassani.Omid A Strategic and Operational Framework for Pre-Disaster Management Considering Sustainability, Resilience, and Smart City Using Multi-Criteria Decision-Making and Mathematical Optimization [ Vol.17, Issue 2 - Autumn Year 2024]
  • bozorgi-amiri.ali Planning for Medical Emergency Transportation Vehicles during Natural Disasters [ Vol.13, Issue 2 - Autumn Year 2020]
  • Britt.Justin Machine scheduling for multitask machining [ Vol.13, Issue 2 - Autumn Year 2020]

C

  • Cahyaningrum.Dinar Physical Exploration of Materials as a Method to Determine the Maximum Limit of the Attainment Shapes of Three-Ply Plywood [ Vol.16, Issue 2 - Autumn Year 2023]
  • Cavus.Nadire Short-Term Tuberculosis Incidence Rate Prediction for Europe using Machine learning Algorithms [ Vol.16, Issue 2 - Autumn Year 2023]
  • CERVANTES ZUBIRIAS.GABRIELA Industry 4.0- Applications of machine learning in the field of industrial engineering: Systematic review of the literature [ Vol.17, Issue 2 - Autumn Year 2024]
  • Chai.Soo See Daily Rainfall Forecasting Using Meteorology Data with Long Short-Term Memory (LSTM) Network [ Vol.15, Issue 1 - Spring Year 2022]
  • Chala.Nina Competencies of Personnel in Economy 4.0: Challenges and Solutions [ Vol.14, Issue 3 - Summer Year 2021]
  • chambari.amirhossain A New Model for Location-Allocation Problem within Queuing Framework [ Vol.3, Issue 6 - Autumn Year 2010]
  • chambari.amirhossain Genetic Algorithm and Simulated Annealing for Redundancy Allocation Problem with Cold-standby Strategy [ Vol.4, Issue 8 - Summer Year 2011]
  • Chavan.Shivaji Fixture Design and Work Piece Deformation Optimization Using the Iterative Simplex Algorithm [ Vol.12, Issue 2 - Autumn Year 2019]
  • Chen.Shuwei Making Optimal Decisions of Assembly Products in Supply Chain [ Vol.4, Issue 8 - Summer Year 2011]
  • Chenni.Rachid A New Optimization Algorithm for Optimal Wind Turbine Location Problem in Constantine City Electric Distribution Network Based Active Power Loss Reduction [ Vol.14, Issue 2 - Autumn Year 2021]
  • Cheraghalipour.Armin Assessing the impact of environmental aspects, land use, and R&D policies on peri-urban agriculture using a system dynamics approach [ Vol.15, Issue 2 - Autumn Year 2022]
  • Chinchanikar.Satish Multi-objective Optimization of Turning of Titanium Alloy Under Minimum Quantity Lubrication [ Vol.15, Issue 1 - Spring Year 2022]
  • Chinwuko.Emmanuel Production Constraints Modelling: A Tactical Review Approach [ Vol.13, Issue 1 - Spring Year 2020]

D

  • Dadd.Deneise Developing a Transfer Point Location Problem Considering Normal Demands Distribution [ Vol.15, Issue 1 - Spring Year 2022]
  • dadmand.fateme Investigating factors affecting the acceptance of m-government based on fuzzy cognitive map in Iran [ Vol.16, Issue 2 - Autumn Year 2023]
  • Dagne.Teshome Bekele Productivity Improvement through customized lean and six sigma for Garment manufacturing Industries [ Vol.16, Issue 1 - Spring Year 2023]
  • Dagne.Teshome Bekele Design of Supply Chain Network Model for Perishable Products with Stochastic Demand: An Optimized Model [ Vol.13, Issue 1 - Spring Year 2020]
  • Dametew.Alie Production Planning and Control Strategies Used as A Gear Train for The Death and Birth of Manufacturing Industries [ Vol.12, Issue 2 - Autumn Year 2019]
  • Dametew.Alie The Regional Performance Impacts in the Supply Chain integration: Evidence from East Africa Basic Metal Industry [ Vol.14, Issue 1 - Spring Year 2021]
  • Dametew.Alie Wube Enhancing Basic Metal Industry Global Competitiveness Through Total Quality Management, Supply Chain Management & Just- In -Time [ Vol.13, Issue 2 - Autumn Year 2020]
  • Dametew.Alie Wube Production Planning and Control Strategies Used as A Gear Train for The Death and Birth of Manufacturing Industries [ Vol.12, Issue 2 - Autumn Year 2019]
  • Darvish Motevali.Mohammad Hossein Designing a Robust Model of the Blood Supply Chain in Conditions of Demand Uncertainty [ Vol.17, Issue 2 - Autumn Year 2024]
  • Dehghani.Mina A Non-dominated Sorting Ant Colony Optimization Algorithm Approach to the Bi-objective Multi-vehicle Allocation of Customers to Distribution Centers [ Vol.9, Issue 19 - Spring Year 2016]
  • Dehnavi-Arani.Saeed A Job Shop Scheduling and Location of Battery Charging Storage for the Automated Guided Vehicles (AGVs) [ Vol.12, Issue 2 - Autumn Year 2019]
  • Delnavaz.Ali Investigating the potential to improve the efficiency of iran's road bridge management system from the point of view of bridge maintenance experts [ Vol.16, Issue 1 - Spring Year 2023]
  • desta.Tsegay Optimization of Inventory Controlling System Using Integrated Seasonal Forecasting and Integer Programming [ Vol.15, Issue 1 - Spring Year 2022]
  • DIAZ MARTINEZ.MARCO ANTONIO Industry 4.0- Applications of machine learning in the field of industrial engineering: Systematic review of the literature [ Vol.17, Issue 2 - Autumn Year 2024]
  • Didehvar.Frazad A Mixed Integer Programming Formulation for the Heterogeneous Fixed Fleet Open Vehicle Routing Problem [ Vol.8, Issue 18 - Autumn Year 2015]
  • Dokohaki.Parshang Developing and solving the multi-objective flexible and sustainable job shop scheduling problem with reverse flow and job rotation considerations in uncertain situations [ Vol.16, Issue 2 - Autumn Year 2023]
  • Dorfeshan.Y. A New Analysis of Critical Paths in Mega Projects with Interval Type-2 Fuzzy Activities by Considering Time, Cost, Risk, Quality, and Safety Factors [ Vol.15, Issue 1 - Spring Year 2022]
  • Dubyna.Maksym Transformation of Household Credit Behavior in the Conditions of Digitalization of the Financial Services Market [ Vol.14, Issue 3 - Summer Year 2021]

E

  • Ebrahimnejad.Sadallah Using Hybrid Fuzzy PROMETHEE II and Fuzzy Binary Goal Programming for Risk Ranking: A Case Study of Highway Construction Projects [ Vol.4, Issue 9 - Autumn Year 2011]
  • Eftekhari Moghadam.Amir Masoud Estimation of Products Final Price Using Bayesian Analysis Generalized Poisson Model and Artificial Neural Networks [ Vol.2, Issue 2 - Spring Year 2009]
  • eghbali.mahdi New Heuristic Algorithm for Flow Shop Scheduling with 3 Machines and 2 Robots Considering the Breakdown Interval of Machines and Robots Simultaneously [ Vol.10, Issue 21 - Spring Year 2017]
  • EJAU.RUTH The impacts and opportunities of SALCRA plantation to the landowner’s socio-economic and labour supply: a case study of SALCRA estates in saratok district [ Vol.16, Issue 1 - Spring Year 2023]
  • Emara.Islam A New Techno-Economic Real-Time Total Process Performance Indicator [ Vol.15, Issue 2 - Autumn Year 2022]
  • Enayati.Mojtaba Scheduling on flexible flow shop with cost-related objective function considering outsourcing options [ Vol.14, Issue 2 - Autumn Year 2021]
  • ershadi.mohamad javad A Comparative Study of Four Evolutionary Algorithms for Economic and Economic-Statistical Designs of MEWMA Control Charts [ Vol.4, Issue 9 - Autumn Year 2011]
  • ershadi.mohamad javad An Efficient Economic-Statistical Design of Simple Linear Profiles Using a Hybrid Approach of Data Envelopment Analysis, Taguchi Loss Function, and MOPSO [ Vol.13, Issue 1 - Spring Year 2020]
  • Esfandyari.Nima Identifying and Evaluating Effective Factors in Green Supplier Selection using Association Rules Analysis [ Vol.14, Issue 2 - Autumn Year 2021]
  • Eskandari.Simin The Design of Inverse Network DEA Model for Measuring the Bullwhip Effect in Supply Chains with Uncertain Demands [ Vol.14, Issue 1 - Spring Year 2021]
  • Eslami.Mohammad A New Fuzzy Stabilizer Based on Online Learning Algorithm for Damping of Low-Frequency Oscillations [ Vol.8, Issue 17 - Spring Year 2015]
  • Esmaeili Aliabadi.Danial Modelling Integrated Multi-item Supplier Selection with Shipping Frequencies [ Vol.8, Issue 18 - Autumn Year 2015]
  • Esmaeili.Maryam A Regret Minimization Approach in Product Portfolio Management with respect to Customers’ Price-sensitivity [ Vol.12, Issue 1 - Spring Year 2019]
  • Esmaeilian.Gholamreza A Benders-Decomposition and Meta-Heuristic Algorithm for a Bi- Objective Stochastic Reliable Capacitated Facility Location Problem Not Dealing with Benders Feasibility-Cut Stage [ Vol.14, Issue 1 - Spring Year 2021]
  • esmailnezhad.bahman Designing Stochastic Cell Formation Problem Using Queuing Theory [ Vol.8, Issue 18 - Autumn Year 2015]
  • etebari.farhad Modelling and optimization of a tri-objective Transportation-Location-Routing Problem considering route reliability: using MOGWO, MOPSO, MOWCA and NSGA-II [ Vol.14, Issue 2 - Autumn Year 2021]

F

  • Fadaei.Mehdi Multi-objective Optimization of Blood Supply Network Using the Meta-Heuristic Algorithms [ Vol.17, Issue 2 - Autumn Year 2024]
  • faezirazi,.farshad A Grey-Based Fuzzy ELECTRE Model for Project Selection [ Vol.8, Issue 17 - Spring Year 2015]
  • faezirazi,.farshad A Hybrid Grey based Two Steps Clustering and Firefly Algorithm for Portfolio Selection [ Vol.10, Issue 22 - Autumn Year 2017]
  • Fahimi.kaveh Centralized Supply Chain Network Ddesign: Monopoly, Duopoly, and Ooligopoly Competitions under Uncertainty [ Vol.11, Issue 2 - Autumn Year 2018]
  • Fakharian.Ahmad Direct Optimal Motion Planning for Omni-directional Mobile Robots under Limitation on Velocity and Acceleration [ Vol.10, Issue 22 - Autumn Year 2017]
  • fakhrzad.mohammad bagher A new multi-objective mathematical model for a Citrus supply chain network design: Metaheuristic algorithms [ Vol.14, Issue 2 - Autumn Year 2021]
  • fallah nezhad.mohammad saber Absorbing Markov Chain Models to Determine Optimum Process Target Levels in Production Systems with Rework and Scrapping [ Vol.3, Issue 6 - Autumn Year 2010]
  • fallah nezhad.mohammad saber Bayesian Estimation of Shift Point in Shape Parameter of Inverse Gaussian Distribution Under Different Loss Functions [ Vol.8, Issue 18 - Autumn Year 2015]
  • Fallah.Mohammad An integrated crew scheduling problem considering reserve crew in air transportation: Ant colony optimization algorithm [ Vol.15, Issue 2 - Autumn Year 2022]
  • Fallah.Mohammad Developing a Fuzzy Green Supply Chain Management Problem Considering Location Allocation Routing Problem: Hybrid Meta-Heuristic Approach [ Vol.15, Issue 1 - Spring Year 2022]
  • Farhang Moghadam.Babak A Scientometric Analysis of Supplier Selection Research [ Vol.14, Issue 1 - Spring Year 2021]
  • Farrokhi-Asl.Hamed A Multi-objective Mixed Model Two-sided Assembly Line Sequencing Problem in a Make –To- Order Environment with Customer Order Prioritization [ Vol.12, Issue 2 - Autumn Year 2019]
  • Farrokhi-Asl.Hamed A New Mathematical Model for the Green Vehicle Routing Problem by Considering a Bi-Fuel Mixed Vehicle Fleet [ Vol.13, Issue 2 - Autumn Year 2020]
  • Farughi.Hiwa Healthcare Districting Optimization Using Gray Wolf Optimizer and Ant Lion Optimizer Algorithms (case study: South Khorasan Healthcare System in Iran) [ Vol.12, Issue 1 - Spring Year 2019]
  • Farughi.Hiwa A Hybrid Method Based on Fuzzy AHP and VIKOR for the Discrete Time-Cost-Quality Trade-off Problem [ Vol.9, Issue 19 - Spring Year 2016]
  • Fatehi Kivi.amir Fuzzy Mathematical Model For A Lot-Sizing Problem In Closed-Loop Supply Chain [ Vol.11, Issue 1 - Spring Year 2018]
  • Fatehi Kivi.amir Solving a Multi-Item Supply Chain Network Problem by Three Meta-heuristic Algorithms [ Vol.14, Issue 2 - Autumn Year 2021]
  • Fatehi Kivi.Amir Three Metaheuristic Algorithms for Solving the Multi-item Capacitated Lot-sizing Problem with Product Returns and Remanufacturing [ Vol.7, Issue 16 - Winter Year 2014]
  • Fatemi Qomi.SMT Location-Allocation and Scheduling of Inbound and Outbound Trucks in Multiple Cross-Dockings Considering Breakdown Trucks [ Vol.11, Issue 1 - Spring Year 2018]
  • Fatemi Qomi.SMT Integrated Due Date Setting and Scheduling on a Single Machine Considering an Unexpected Unavailability [ Vol.12, Issue 1 - Spring Year 2019]
  • Fathi Aghdam.Faranak A Two-dimensional Warranty Model with Consideration of Customer and Manufacturer Objectives Solved with Non-dominated Sorting Genetic Algorithm [ Vol.12, Issue 1 - Spring Year 2019]
  • Fathi.Mohammad Reza Developing a Risk Management Model for Banking Software Development Projects Based on Fuzzy Inference System [ Vol.13, Issue 2 - Autumn Year 2020]
  • fattahi.parviz A Multi-Objective Mixed-Model Assembly Line Sequencing Problem With Stochastic Operation Time [ Vol.11, Issue 1 - Spring Year 2018]
  • fattahi.parviz A Multi-Objective Particle Swarm Optimization for Mixed-Model Assembly Line Balancing with Different Skilled Workers [ Vol.9, Issue 20 - Autumn Year 2016]
  • fattahi.parviz Designing Stochastic Cell Formation Problem Using Queuing Theory [ Vol.8, Issue 18 - Autumn Year 2015]
  • Fattahi.parviz A New Approach in Job Shop Scheduling: Overlapping Operation [ Vol.2, Issue 3 - Summer Year 2009]
  • Fazel Zarandi.Mohammad Hossein Application of Rough Set Theory in Data Mining for Decision Support Systems (DSSs) [ Vol.1, Issue 1 - Autumn Year 2008]
  • Fazelimoghadam.Elnaz An Efficient Economic-Statistical Design of Simple Linear Profiles Using a Hybrid Approach of Data Envelopment Analysis, Taguchi Loss Function, and MOPSO [ Vol.13, Issue 1 - Spring Year 2020]
  • Fazli.Mehdi A Job Shop Scheduling and Location of Battery Charging Storage for the Automated Guided Vehicles (AGVs) [ Vol.12, Issue 2 - Autumn Year 2019]
  • Fazlollahtabar.Hamed Monte Carlo Simulation to Compare Markovian and Neural Network Models for Reliability Assessment in Multiple AGV Manufacturing System [ Vol.9, Issue 19 - Spring Year 2016]
  • Fazlollahtabar.Hamed Scheduling of Multiple Autonomous Guided Vehicles for an Assembly Line Using Minimum Cost Network Flow [ Vol.11, Issue 1 - Spring Year 2018]
  • Firdaus.Feris DPSIR Framework of Global Food Loss and Waste: Recommended Sustainable Intervention for Indonesia [ Vol.17, Issue 2 - Autumn Year 2024]
  • Fitriadi.Fitriadi Enhancing Production Process Performance in Traditional Shipyards: An Integrated Approach for Waste Identification and Performance Optimization [ Vol.16, Issue 2 - Autumn Year 2023]
  • Fitriadi.Fitriadi Continuous improvement strategy in traditional shipyard industry: a holistic approach towards sustainability [ Vol.16, Issue 1 - Spring Year 2023]
  • Forghani.Athena A Scientometric Analysis of Supplier Selection Research [ Vol.14, Issue 1 - Spring Year 2021]
  • Foroozesh.N. Hierarchical Group Compromise Ranking Methodology Based on Euclidean–Hausdorff Distance Measure Under Uncertainty: An Application to Facility Location Selection Problem [ Vol.12, Issue 2 - Autumn Year 2019]
  • Foumani.Mehdi Process Capability Analysis in the Presence of Autocorrelation [ Vol.4, Issue 9 - Autumn Year 2011]
  • Foumani.Mehdi Process Capability Analysis in the Presence of Autocorrelation [ Vol.6, Issue 12 - Spring Year 2013]
  • Frank.Ebinger Production Planning and Control Strategies Used as A Gear Train for The Death and Birth of Manufacturing Industries [ Vol.12, Issue 2 - Autumn Year 2019]
  • Fridayanti Adam.Fia Financial Health Analysis on PT Asuransi LMIGNKG Based on Premium Reserve Calculation [ Vol.17, Issue 1 - Spring Year 2024]

G

  • Gaffar.Vanessa Dimensions of Market-Sensing Capability Identifying SMEs Created: A Systematic Literature Review [ Vol.16, Issue 2 - Autumn Year 2023]
  • Gan.Heng-Soon Monitoring process variability: a hybrid Taguchi loss and multiobjective genetic algorithm approach [ Vol.9, Issue 20 - Autumn Year 2016]
  • Gebeyehu.Sisay Application of Failure Mode Effect Analysis (FMEA) for Efficient and Cost-effective Manufacturing: A Case Study at Bahir Dar Textile Share Company, Ethiopia [ Vol.12, Issue 1 - Spring Year 2019]
  • gebrehiwot.leake Optimization of Inventory Controlling System Using Integrated Seasonal Forecasting and Integer Programming [ Vol.15, Issue 1 - Spring Year 2022]
  • gebremicheal.gebremedhin Productivity Improvement through Line Balancing by Using Simulation Modeling [ Vol.13, Issue 1 - Spring Year 2020]
  • Geremew.Sisay Service Performance Improvement Model: The Case of Teklehaymanot General Hospital [ Vol.11, Issue 1 - Spring Year 2018]
  • Geremew.Sisay Design of Supply Chain Network Model for Perishable Products with Stochastic Demand: An Optimized Model [ Vol.13, Issue 1 - Spring Year 2020]
  • Getie.Muluken Analytical Modeling of Specific Energy Consumption and Cost Share in Comprehensive Textile Industry: Case Study of Ethiopia [ Vol.13, Issue 2 - Autumn Year 2020]
  • Ghadimi.Pezhman An Integrated Approach of Fuzzy Quality Function Deployment and Fuzzy Multi-Objective Programming Tosustainable Supplier Selection and Order Allocation [ Vol.11, Issue 1 - Spring Year 2018]
  • Ghaffari.mahdi Controlling the Bullwhip Effect in a Supply Chain Network with an Inventory Replenishment Policy by a Robust Control Method [ Vol.7, Issue 16 - Winter Year 2014]
  • Ghafori.Kasra A soft approach to supplier selection problem for a steel company under future uncertainty [ Vol.16, Issue 1 - Spring Year 2023]
  • Ghahremani-Nahr.Javid A combined transportation model for the fruit and vegetable supply chain network [ Vol.15, Issue 2 - Autumn Year 2022]
  • Ghalebsaz-Jeddi.Babak Three Approaches to Time Series Forecasting of Petroleum Demand in OECD Countries [ Vol.11, Issue 2 - Autumn Year 2018]
  • Ghanavati-Nejad.Mohssen Evaluating the Performance of the Raw Material Providers based on the Customer-based LARG (CLARG) Paradigm: A Machine Learning-based Method [ Vol.17, Issue 2 - Autumn Year 2024]
  • Ghanbari.Ali Asghar Electrical Energy Management of Industrial Consumers to Increase Profitability with an Optimal Control Strategy - a case study [ Vol.16, Issue 2 - Autumn Year 2023]
  • Ghanbari.Mohammad Reza A Simulation Model for Optimization of the Internal Handling Fleet Size at Shahid Rajaee Container Port Based on Performance Evaluation [ Vol.4, Issue 8 - Summer Year 2011]
  • Ghanbari.Mohammad Reza Performance Improvement through a Marshaling Yard Storage Area in a Container Port Using Optimization via Simulation Technique (Case Study at Shahid Rajaee Container Port) [ Vol.9, Issue 20 - Autumn Year 2016]
  • Ghanbarian.Davoud Reliability Analysis of a Mounted Moldboard Plow Bottom Standard using the FORM Method [ Vol.15, Issue 2 - Autumn Year 2022]
  • ghane.mahshid A Stochastic Optimization Approach to a Location-Allocation Problem of Organ Transplant Centers [ Vol.11, Issue 1 - Spring Year 2018]
  • Ghane.Neda Developing Fuzzy Tool Capability Measurement System Analysis [ Vol.14, Issue 1 - Spring Year 2021]
  • Gharavipour.Marjan A Robust Optimization Approach for the Hub Arc Location Problem [ Vol.17, Issue 1 - Spring Year 2024]
  • Ghasemi.Ali A New Fuzzy Stabilizer Based on Online Learning Algorithm for Damping of Low-Frequency Oscillations [ Vol.8, Issue 17 - Spring Year 2015]
  • Ghashami.Seyed Sajad A Three-Echelon Multi-Objective Multi-Period Multi-Product Supply Chain Network Design Problem: A Goal Programming Approach [ Vol.10, Issue 21 - Spring Year 2017]
  • Ghazali.Hazrina binti The effect of TQM practices on job satisfaction in higher education institutes. A systematic literature review from the last two decades [ Vol.16, Issue 1 - Spring Year 2023]
  • Gheibi.Ali Sizing optimization of truss structures with discrete design variables using combined PSO algorithm with Special Particles Method [ Vol.16, Issue 2 - Autumn Year 2023]
  • Gheibi.Mahdi Sizing optimization of truss structures with discrete design variables using combined PSO algorithm with Special Particles Method [ Vol.16, Issue 2 - Autumn Year 2023]
  • ghezavati.vahid reza A Benders' Decomposition Method to Solve Stochastic Distribution Network Design Problem with Two Echelons and Inter-Depot Transportation [ Vol.8, Issue 18 - Autumn Year 2015]
  • Ghezavati.Vahid Reza Three Hybrid Metaheuristic Algorithms for Stochastic Flexible Flow Shop Scheduling Problem with Preventive Maintenance and Budget Constraint [ Vol.12, Issue 2 - Autumn Year 2019]
  • Ghiasi.Yas Diabetes detection via machine learning using four implemented spanning tree algorithms [ Vol.17, Issue 1 - Spring Year 2024]
  • Ghlichkhan.Akram Optimal Use of Social Media From the Perspective of Brand Equity in Startups with a Data Approach [ Vol.13, Issue 2 - Autumn Year 2020]
  • ghodoosi.mohammad The Optimal Number of Hospital Beds Under Uncertainty: A Costs Management Approach [ Vol.11, Issue 2 - Autumn Year 2018]
  • ghodoosi.mohammad Optimizing a bi-objective preemptive multi-mode resource constrained project scheduling problem: NSGA-II and MOICA algorithms [ Vol.10, Issue 21 - Spring Year 2017]
  • Ghofrani.sedigheh A New Method for Diagnosing Patients Suspected of Bone Marrow Metastasis in the Presence of Outliers [ Vol.15, Issue 1 - Spring Year 2022]
  • Gholami.Saber Organizational Competitive Advantage Analysis using SWOT Matrix and Hybrid Approach of Fuzzy-DEMATEL, ANP, and DEA [ Vol.17, Issue 1 - Spring Year 2024]
  • gholamian.mohammad reza A hybrid intuitionistic fuzzy multi-criteria group decision making approach for supplier selection [ Vol.9, Issue 20 - Autumn Year 2016]
  • ghousi.rouzbeh A Data Mining approach for forecasting failure root causes: A case study in an Automated Teller Machine (ATM) manufacturing company [ Vol.13, Issue 2 - Autumn Year 2020]
  • gidey.kidane Performance Measurement and Improvement of Healthcare Service Using Discrete Event Simulation in Bahir Dar Clinic [ Vol.14, Issue 2 - Autumn Year 2021]
  • gidey.kidane Optimization of Inventory Controlling System Using Integrated Seasonal Forecasting and Integer Programming [ Vol.15, Issue 1 - Spring Year 2022]
  • Gitinavard.H A New Version of Earned Value Analysis for Mega Projects Under Interval-valued Fuzzy Environment [ Vol.13, Issue 2 - Autumn Year 2020]
  • Gitinavard.H An Assessment Method for Project Cash Flow under Interval-Valued Fuzzy Environment [ Vol.10, Issue 22 - Autumn Year 2017]
  • Gitinavard.H Hierarchical Group Compromise Ranking Methodology Based on Euclidean–Hausdorff Distance Measure Under Uncertainty: An Application to Facility Location Selection Problem [ Vol.12, Issue 2 - Autumn Year 2019]
  • Gitinavard.Hoseein ELECTRE I-based group decision methodology with risk preferences in an imprecise setting for flexible manufacturing systems [ Vol.14, Issue 1 - Spring Year 2021]
  • Goh.Kok Luong Daily Rainfall Forecasting Using Meteorology Data with Long Short-Term Memory (LSTM) Network [ Vol.15, Issue 1 - Spring Year 2022]
  • Gontareva.Irina Correlation of Income Inequality and Entrepreneurial Activity [ Vol.14, Issue 3 - Summer Year 2021]
  • Goodarzian.F. A new multi-objective mathematical model for a Citrus supply chain network design: Metaheuristic algorithms [ Vol.14, Issue 2 - Autumn Year 2021]
  • Goodarzian.Fariba Optimization of Multi-period Three-echelon Citrus Supply Chain Problem [ Vol.13, Issue 1 - Spring Year 2020]
  • Goodarzimehr.Vahid Hybrid Teaching-Learning-Based Optimization and Harmony Search for Optimum Design of Space Trusses [ Vol.13, Issue 1 - Spring Year 2020]
  • Gopalakrishnan.Bhaskaran DOE-based enhanced genetic algorithm for unrelated parallel machine scheduling to minimize earliness/tardiness costs [ Vol.16, Issue 2 - Autumn Year 2023]
  • Goshu.Yitagesu DEVELOPMENT OF PRODUCTIVITY MEASUREMENT AND ANALYSIS FRAMEWORK FOR MANUFACTURING COMPANIES [ Vol.10, Issue 22 - Autumn Year 2017]
  • Goudarzi.Zohreh Optimizing investment of pumped hydro storage system for renewable energy future [ Vol.16, Issue 1 - Spring Year 2023]
  • Gupta.Ajay Behaviour of Individuals towards E-Waste Management in India [ Vol.13, Issue 2 - Autumn Year 2020]
  • Gupta.Deepak DOE-based enhanced genetic algorithm for unrelated parallel machine scheduling to minimize earliness/tardiness costs [ Vol.16, Issue 2 - Autumn Year 2023]
  • Gutierrez.Juan Neural networks for forecasting irregular demand in an Automotive Diagnostic Centre [ Vol.17, Issue 2 - Autumn Year 2024]

H

  • Haeri.abdolrahman A Data Mining approach for forecasting failure root causes: A case study in an Automated Teller Machine (ATM) manufacturing company [ Vol.13, Issue 2 - Autumn Year 2020]
  • hafezalkootob.ashkan A Three-Echelon Multi-Objective Multi-Period Multi-Product Supply Chain Network Design Problem: A Goal Programming Approach [ Vol.10, Issue 21 - Spring Year 2017]
  • Hafshar.S. Siti Optimization Planning Model for Carbon Dioxide Emissions Reduction Via Renewable Energy Switch in a Coal Power Station [ Vol.15, Issue 2 - Autumn Year 2022]
  • Haghayegh.Sepide Designing an integrated production/distribution and inventory planning model of fixed-life perishable products [ Vol.9, Issue 19 - Spring Year 2016]
  • hailemicheal.misgna Productivity Improvement through Line Balancing by Using Simulation Modeling [ Vol.13, Issue 1 - Spring Year 2020]
  • Haj Khlifa.Selma Enhanced Prudential Standards Under Basel Iii: What Consequences For The Profitability Of Banks [ Vol.14, Issue 3 - Summer Year 2021]
  • Haji Karimi.Babak A Comparison of NSGA II and MOSA for Solving Multi-depots Time-dependent Vehicle Routing Problem with Heterogeneous Fleet [ Vol.7, Issue 16 - Winter Year 2014]
  • Haji Karimi.Babak Optimal Localization of Shopping Centers Using Metaheuristic Genetic Algorithm [ Vol.13, Issue 1 - Spring Year 2020]
  • Haji Karimi.Babak Optimal Localization of Shopping Centers Using Metaheuristic Genetic Algorithm [ Vol.13, Issue 1 - Spring Year 2020]
  • Haji Karimi.Babak Optimizing the Prediction Model of Stock Price in Pharmaceutical Companies Using Multiple Objective Particle Swarm Optimization Algorithm (MOPSO) [ Vol.14, Issue 2 - Autumn Year 2021]
  • Haji.Alireza (1, T) policy for a Two-echelon Inventory System with Perishable-on-the-Shelf Items [ Vol.7, Issue 16 - Winter Year 2014]
  • Hajiaghaei-Keshteli.Mostafa Optimization of Multi-period Three-echelon Citrus Supply Chain Problem [ Vol.13, Issue 1 - Spring Year 2020]
  • Hajiaghaei-Keshteli.Mostafa Solving the Fixed Charge Transportation Problem by New Heuristic Approach [ Vol.12, Issue 1 - Spring Year 2019]
  • Hajian heidary.Mojtaba Determination of Criticality Indexes in the Remanufacturing Process: A GERT-based Simulation Approach [ Vol.11, Issue 2 - Autumn Year 2018]
  • haji-molana.sayyid mohammad A New Bi-objective Mathematical Model to Optimize Reliability and Cost of Aggregate Production Planning System in a Paper and Wood Company [ Vol.13, Issue 1 - Spring Year 2020]
  • Hajipour.Vahid A Continuous Review inventory Control Model within Batch Arrival Queuing Framework: A Parameter-Tuned Imperialist Competitive Algorithm [ Vol.5, Issue 11 - Autumn Year 2012]
  • Hajipour.Vahid Developing a Method for Increasing Accuracy and Precision in Measurement System Analysis: A Fuzzy Approach [ Vol.3, Issue 6 - Autumn Year 2010]
  • Hajipour.Vahid A New Hybrid Algorithm to Optimize Stochastic-fuzzy Capacitated Multi-Facility Location-allocation Problem [ Vol.4, Issue 7 - Spring Year 2011]
  • hajisharifi.nasser Operation Sequencing Optimization in CAPP Using Hybrid Teaching-Learning Based Optimization (HTLBO) [ Vol.13, Issue 1 - Spring Year 2020]
  • Haleh.Hasan A combined Model design for developing and optimizing product platform architecture considering parameters of DFV, DFC, DFSC, and DFAv, case study: phased array radar [ Vol.16, Issue 2 - Autumn Year 2023]
  • Haleh.Hassan A Hierarchical Production Planning and Finite Scheduling Framework for Part Families in Flexible Job-shop (with a case study) [ Vol.6, Issue 12 - Spring Year 2013]
  • Haleh.Hassan Developing a Method for Increasing Accuracy and Precision in Measurement System Analysis: A Fuzzy Approach [ Vol.3, Issue 6 - Autumn Year 2010]
  • halle.hasan New Heuristic Algorithm for Flow Shop Scheduling with 3 Machines and 2 Robots Considering the Breakdown Interval of Machines and Robots Simultaneously [ Vol.10, Issue 21 - Spring Year 2017]
  • hallel.hassan Operation Sequencing Optimization in CAPP Using Hybrid Teaching-Learning Based Optimization (HTLBO) [ Vol.13, Issue 1 - Spring Year 2020]
  • Hardi Purba.Humiras Failure Mode and Effect Analysis Power Plant Boiler [ Vol.11, Issue 2 - Autumn Year 2018]
  • Hariadi.Mochamad Multi-objective optimization of production: A case study on simplex, goal programming, and pareto front models [ Vol.16, Issue 2 - Autumn Year 2023]
  • Hasan.Hameedah Sahib Navigation of mobile robot motion [ Vol.17, Issue 1 - Spring Year 2024]
  • Hasan.Sallaudin Assessing the influence factors of audit fatigue and its impact on audit quality [ Vol.17, Issue 1 - Spring Year 2024]
  • Hasani.Ali Minimizing the operational costs in a flexible flow shop scheduling problem with unrelated parallel machines [ Vol.14, Issue 1 - Spring Year 2021]
  • hasanpour.javad The Optimal Number of Hospital Beds Under Uncertainty: A Costs Management Approach [ Vol.11, Issue 2 - Autumn Year 2018]
  • hasanpour.javad Optimizing a bi-objective preemptive multi-mode resource constrained project scheduling problem: NSGA-II and MOICA algorithms [ Vol.10, Issue 21 - Spring Year 2017]
  • Hasanzadeh.Hamid A Heuristic Algorithm for Nonlinear Lexicography Goal Programming with an Efficient Initial Solution [ Vol.7, Issue 15 - Autumn Year 2014]
  • Hashemi-Tilehnoee.Mehdi Overcoming the uncertainty in a research reactor LOCA in level-1 PSA; Fuzzy based fault-tree/event-tree analysis [ Vol.13, Issue 2 - Autumn Year 2020]
  • HashemiYazdi.Fakhrosadat A New School Bus Routing Problem Considering Gender Separation, Special Students and Mix Loading: A Genetic Algorithm Approach [ Vol.14, Issue 2 - Autumn Year 2021]
  • Hashim.H. Optimization Planning Model for Carbon Dioxide Emissions Reduction Via Renewable Energy Switch in a Coal Power Station [ Vol.15, Issue 2 - Autumn Year 2022]
  • Hassan.Mohamed A New Techno-Economic Real-Time Total Process Performance Indicator [ Vol.15, Issue 2 - Autumn Year 2022]
  • Hatami.Somayeh Evaluating the Performance of the Raw Material Providers based on the Customer-based LARG (CLARG) Paradigm: A Machine Learning-based Method [ Vol.17, Issue 2 - Autumn Year 2024]
  • Heidari.mostafa Estimation of the cost function of a two-echelon inventory system with lost sales using regression [ Vol.1, Issue 1 - Autumn Year 2008]
  • Heidary.P. Location-Allocation and Scheduling of Inbound and Outbound Trucks in Multiple Cross-Dockings Considering Breakdown Trucks [ Vol.11, Issue 1 - Spring Year 2018]
  • Hemmati.Mojtaba Hub Covering Location Problem Considering Queuing and Capacity Constraints [ Vol.11, Issue 1 - Spring Year 2018]
  • heniey.hagazi Performance Measurement and Improvement of Healthcare Service Using Discrete Event Simulation in Bahir Dar Clinic [ Vol.14, Issue 2 - Autumn Year 2021]
  • heniey.hagazi Optimization of Inventory Controlling System Using Integrated Seasonal Forecasting and Integer Programming [ Vol.15, Issue 1 - Spring Year 2022]
  • Herliansyah.Muhammad Kusumawan Factor Analysis of SME Owner Intention to Join Collaborative Manufacturing Networks Using Structural Equation Modeling [ Vol.17, Issue 2 - Autumn Year 2024]
  • Heydari.Habib An integrated model of cellular manufacturing and supplier selection considering product quality [ Vol.10, Issue 22 - Autumn Year 2017]
  • Heydari.seyed abbas Identifying the Factors Affecting Consumer Perceptions on Product Safety and Model Presentation (Case study: Home Appliances Consumers) [ Vol.15, Issue 1 - Spring Year 2022]
  • Hidayat.Anas Research development of logistic efficiency [ Vol.16, Issue 1 - Spring Year 2023]
  • Hidayat.Anas The Influence of Logistics Performance on Company Performance in the Small and Medium Industry [ Vol.17, Issue 1 - Spring Year 2024]
  • Hidouci.Walid Khaled Uncertainty Identification in Microblogs [ Vol.15, Issue 1 - Spring Year 2022]
  • Homayounfar.Mahdi Multi-objective Optimization of Blood Supply Network Using the Meta-Heuristic Algorithms [ Vol.17, Issue 2 - Autumn Year 2024]
  • Homayounfar.Mahdi A Dynamic Model for Assessing the Sustainability of Small and Medium Sized Enterprises [ Vol.17, Issue 2 - Autumn Year 2024]
  • Homayounfar.Mahdi A dynamics approach for modeling inventory fluctuations of the pharmaceutical supply chain in covid 19 pandemic [ Vol.16, Issue 1 - Spring Year 2023]
  • Hossain.Md. Mosharraf Fuzzy Multi-Objective Linear Programming for Project Management Decision under Uncertain Environment with AHP Based Weighted Average Method [ Vol.9, Issue 20 - Autumn Year 2016]
  • Hossain.Md. Mosharraf Multi-Objective Optimization for Multi-Product Multi-Period Four Echelon Supply Chain Problems Under Uncertainty [ Vol.13, Issue 1 - Spring Year 2020]
  • Hossain.Md. Sanowar Fuzzy Multi-Objective Linear Programming for Project Management Decision under Uncertain Environment with AHP Based Weighted Average Method [ Vol.9, Issue 20 - Autumn Year 2016]
  • Hosseini Shirvani.Mirsaeid A hybrid model based on machine learning and genetic algorithm for detecting fraud in financial statements [ Vol.14, Issue 2 - Autumn Year 2021]
  • Hosseini.Adib Cell forming and cell balancing of virtual cellular manufacturing systems with alternative processing routes using genetic algorithm [ Vol.9, Issue 20 - Autumn Year 2016]
  • Hosseini.Eghbal Presentation and Solving Non-Linear Quad-Level Programming Problem Utilizing a Heuristic Approach Based on Taylor Theorem [ Vol.11, Issue 1 - Spring Year 2018]
  • hosseini.seyed mohamad hasan Minimizing the operational costs in a flexible flow shop scheduling problem with unrelated parallel machines [ Vol.14, Issue 1 - Spring Year 2021]
  • Hosseini.Seyyed Mehdi Examining and Prioritizing the Factors Affecting Tourist Absorption for Ecotourism Centers Utilizing MCDM Tools [ Vol.15, Issue 1 - Spring Year 2022]
  • hosseini.zahra sadat Optimizing a bi-objective preemptive multi-mode resource constrained project scheduling problem: NSGA-II and MOICA algorithms [ Vol.10, Issue 21 - Spring Year 2017]
  • hosseini.zahra sadat A Bi-objective Pre-emption Multi-mode Resource Constrained Project Scheduling Problem with due Dates in the Activities [ Vol.7, Issue 15 - Autumn Year 2014]
  • Hosseinian.Amir Hossein An Evolutionary Algorithm Based on a Hybrid Multi-Attribute Decision Making Method for the Multi-Mode Multi-Skilled Resource-constrained Project Scheduling Problem [ Vol.12, Issue 2 - Autumn Year 2019]
  • Hosseini-Kia.Sadegh The Preemptive Just-in-time Scheduling Problem in a Flow Shop Scheduling System [ Vol.12, Issue 2 - Autumn Year 2019]
  • hosseinzadeh lotfi.farhad Classifying the Customers of Telecommunication Company in order to Identify Profitable Customers Based on Their First Transaction, Using Decision Tree: A Case Study of System 780 [ Vol.12, Issue 2 - Autumn Year 2019]
  • How.Bong Chih A Web-based Consolidated Geotechnical Site Investigation (CoGSI) of Sarawak Soils [ Vol.15, Issue 1 - Spring Year 2022]
  • Hrushchynska.Nataliia Intellectual Capital of Institutions of Higher Education in the Knowledge Economy [ Vol.14, Issue 3 - Summer Year 2021]
  • Huda.Asrul Designing and Building of E-Learning Applications For SMK Negeri 1 Gunung Talang [ Vol.16, Issue 2 - Autumn Year 2023]
  • Hurriyati.Ratih Dimensions of Market-Sensing Capability Identifying SMEs Created: A Systematic Literature Review [ Vol.16, Issue 2 - Autumn Year 2023]
  • Hussain.Norhaida Modelling of Crowd Evacuation with Communication Strategy using Social Force Model [ Vol.15, Issue 1 - Spring Year 2022]

I

  • IBIL.EVIE The impacts and opportunities of SALCRA plantation to the landowner’s socio-economic and labour supply: a case study of SALCRA estates in saratok district [ Vol.16, Issue 1 - Spring Year 2023]
  • Idrus.Durrishah Land Administrator Personal Competency Model Using Exploratory Factor Analysis [ Vol.15, Issue 2 - Autumn Year 2022]
  • Ifowodo.Henry Production Constraints Modelling: A Tactical Review Approach [ Vol.13, Issue 1 - Spring Year 2020]
  • Iftitah.Nur Storage Zone Functions Optimization in Warehouses: A Systematic Review of Class-Based Storage [ Vol.16, Issue 2 - Autumn Year 2023]
  • Ihsan.Nurul Analysis of safety factors in wheelchair frames for stroke sufferers [ Vol.17, Issue 2 - Autumn Year 2024]
  • IKAU.ROSELINE The impacts and opportunities of SALCRA plantation to the landowner’s socio-economic and labour supply: a case study of SALCRA estates in saratok district [ Vol.16, Issue 1 - Spring Year 2023]
  • irajpour.alireza Fuzzy model of hesitant decision making in evaluating business plans under uncertainty (an approach to developing new products) [ Vol.16, Issue 2 - Autumn Year 2023]
  • iranpoor.Mehdi Integrated Due Date Setting and Scheduling on a Single Machine Considering an Unexpected Unavailability [ Vol.12, Issue 1 - Spring Year 2019]
  • Irjayanti.Maya How does the Coffee Supply Chain Work in Indonesia? [ Vol.16, Issue 2 - Autumn Year 2023]
  • Irtyshcheva.Inna The Influence of Globalization Processes on Forecasting the Activities of Market Entities [ Vol.15, Issue 1 - Spring Year 2022]
  • Irtyshcheva.Inna Evaluation of the Efficiency of the Housing and Utilities Sector and Management of its Investment Framework in Conditions of Authorities Decentralization [ Vol.15, Issue 1 - Spring Year 2022]
  • Irtyshcheva.Inna Development Trends and Regualtion Peculiarities of the Housing and Utility Sector in Terms of the Resource Efficiency [ Vol.15, Issue 1 - Spring Year 2022]
  • Irum.Sobia Types of welding process and relationship with defective rate in structural fabrication for oil & gas project [ Vol.16, Issue 1 - Spring Year 2023]
  • Irum.Sobia The impact of work from home on productivity among manufacturing industry workers during MCO [ Vol.16, Issue 1 - Spring Year 2023]
  • Iskandar.Yelita Anggiane Supplier Selection Using Fuzzy Analytical Hierarchy Process: A Bibliometric Analysis [ Vol.17, Issue 2 - Autumn Year 2024]
  • Ismail.Affero Occupational competency profile for workers in mechanical industry towards sustainable development [ Vol.16, Issue 1 - Spring Year 2023]
  • Ismail.Noriszura Modelling Malaysia stock markets using GARCH, EGARCH and copula models [ Vol.15, Issue 2 - Autumn Year 2022]
  • Ismail.Yusof Developing Fuzzy Tool Capability Measurement System Analysis [ Vol.14, Issue 1 - Spring Year 2021]
  • Ismail.Zul-Atfi Integrating Maintenance Management System in IBS Building Projects: A Qualitative Study [ Vol.16, Issue 2 - Autumn Year 2023]

J

  • J. Afshari.Ahmad Solving the Fixed Charge Transportation Problem by New Heuristic Approach [ Vol.12, Issue 1 - Spring Year 2019]
  • Jabar.Juhaini Determining The Relationship Between Adoption Factors of P3 Sweetener through Partial Least Squares Structural Equation Modeling Approach [ Vol.15, Issue 2 - Autumn Year 2022]
  • Jabar.Juhaini Determining The Relationship Between Adoption Factors of P3 Sweetener through Partial Least Squares Structural Equation Modeling Approach [ Vol.15, Issue 2 - Autumn Year 2022]
  • jabarzadeh.armin An Integrated Approach for Facility Location and Supply Vessel Planning with Time Windows [ Vol.12, Issue 1 - Spring Year 2019]
  • jabbar Rashidi.Ali A New Model Representation for Road Mapping in Emerging Sciences: A Case Study on Roadmap of Quantum Computing [ Vol.13, Issue 2 - Autumn Year 2020]
  • jafari.davood Developing and solving the multi-objective flexible and sustainable job shop scheduling problem with reverse flow and job rotation considerations in uncertain situations [ Vol.16, Issue 2 - Autumn Year 2023]
  • jafari.davood Investigating the Effect of Product Packaging Design on Attracting Customers about Cosmetic Products with Conjoint Analysis Method [ Vol.15, Issue 1 - Spring Year 2022]
  • Jafari.Hamed Nurse Scheduling Problem by Considering Fuzzy Modeling Approach to Treat Uncertainty on Nurses’ Preferences for Working Shifts and Weekends off [ Vol.14, Issue 1 - Spring Year 2021]
  • Jafari.Hamed A mathematical programming model for single round-robin tournament problem: A case study of Volleyball Nations League [ Vol.15, Issue 2 - Autumn Year 2022]
  • Jahan.Ali Multi-response Optimization of Grooved Circular Tubes Filled with Polyurethane Foam as Energy Absorber [ Vol.12, Issue 1 - Spring Year 2019]
  • Jahed.Rasul Measuring the overall performances of decision-making units in the presence of imprecise data [ Vol.5, Issue 11 - Autumn Year 2012]
  • Jalali.Sajjad A Risk-averse Inventory-based Supply Chain Protection Problem with Adapted Stochastic Measures under Intentional Facility Disruptions: Decomposition and Hybrid Algorithms [ Vol.13, Issue 2 - Autumn Year 2020]
  • Jalili.Saeed An Algorithm Based on Theory of Constraints and Branch and Bound for Solving Integrated Product-Mix-Outsourcing Problem [ Vol.12, Issue 1 - Spring Year 2019]
  • Jalilzade.Saeid A New Fuzzy controller for Damping of Sub Synchronous Resonance (SSR) in the modified IEEE First Bench Mark [ Vol.15, Issue 2 - Autumn Year 2022]
  • Jamali.Gholamreza Relationship between Business Intelligence Components and Financial Reporting Quality in Firms [ Vol.14, Issue 2 - Autumn Year 2021]
  • Jamshidi.Rasoul Developing a New Decision Support System to Manage Human Reliability based on HEART Method [ Vol.13, Issue 1 - Spring Year 2020]
  • Janari.Dian Research development of logistic efficiency [ Vol.16, Issue 1 - Spring Year 2023]
  • jasemi.milad Investigating Knowledge Management Practices in a Successful Research and Development Organization [ Vol.11, Issue 2 - Autumn Year 2018]
  • javadi.sonia A New Uni-attribute Control Chart to Monitor the Number of Nonconformities [ Vol.6, Issue 12 - Spring Year 2013]
  • Javadian kootanaee.Akbar A hybrid model based on machine learning and genetic algorithm for detecting fraud in financial statements [ Vol.14, Issue 2 - Autumn Year 2021]
  • Javadian Kootanaee.Akbar A hybrid model based on machine learning and genetic algorithm for detecting fraud in financial statements [ Vol.14, Issue 2 - Autumn Year 2021]
  • Jayaprakash.Jeyaraju Design of Supply Chain Network Model for Perishable Products with Stochastic Demand: An Optimized Model [ Vol.13, Issue 1 - Spring Year 2020]
  • Jelodari Mamaghani.Elham The Bi-Objective Location-Routing Problem based on Simultaneous Pickup and Delivery with Soft Time Window [ Vol.10, Issue 22 - Autumn Year 2017]
  • Jilcha.Kassu Knowledge Diffusion to Workplace Safety and Health Improvement [ Vol.10, Issue 21 - Spring Year 2017]
  • Johari.A. Optimization Planning Model for Carbon Dioxide Emissions Reduction Via Renewable Energy Switch in a Coal Power Station [ Vol.15, Issue 2 - Autumn Year 2022]
  • Johari.Sobar Enhancing Ethic Integrity and Human Resource Development to Build a Green Banking Business Model in Indonesia [ Vol.17, Issue 2 - Autumn Year 2024]
  • jouzdani.javid Determining the Best Combination of Perspective indicators of Balanced Scorecard by using Game Theory [ Vol.14, Issue 1 - Spring Year 2021]
  • Jouzdani.Javid Cell forming and cell balancing of virtual cellular manufacturing systems with alternative processing routes using genetic algorithm [ Vol.9, Issue 20 - Autumn Year 2016]
  • Julai.Norhuzaimin Throughput Improvement of RIPEMD-160 Design using Unfolding Transformation Technique [ Vol.15, Issue 1 - Spring Year 2022]

K

  • Kamal.S.K. Conceptual Framework for Implementing Bottom-Up Kaizen in the Malaysian Automotive Sector [ Vol.17, Issue 1 - Spring Year 2024]
  • kamali dolatabadi.amir hossein Layout of Cellular Manufacturing System in Dynamic Condition [ Vol.3, Issue 5 - Spring Year 2010]
  • Kamarudin.Nurhayati Evaluation on Material Structural Scarcity Resource Towards Sustainable Supply Chain Performance [ Vol.15, Issue 2 - Autumn Year 2022]
  • Kang.Min-Hyo Supply chain resilience and market performance amid COVID-19 disruptions: The role of relational capital and supply chain disruption orientation in South Korean firms [ Vol.16, Issue 2 - Autumn Year 2023]
  • Karbaschi.Ebrahim Effects of Probability Function on the Performance of Stochastic Programming [ Vol.11, Issue 1 - Spring Year 2018]
  • Karbasian.Mahdi Optimizing Outsourcing Decisions in the Service Sectors and Businesses: A Comprehensive DSS Model for Effective Ranking and Selection [ Vol.17, Issue 1 - Spring Year 2024]
  • Karbasian.Mehdi A combined Model design for developing and optimizing product platform architecture considering parameters of DFV, DFC, DFSC, and DFAv, case study: phased array radar [ Vol.16, Issue 2 - Autumn Year 2023]
  • Karbasian.Mehdi A Strategic and Operational Framework for Pre-Disaster Management Considering Sustainability, Resilience, and Smart City Using Multi-Criteria Decision-Making and Mathematical Optimization [ Vol.17, Issue 2 - Autumn Year 2024]
  • Karim.Abdul Razak Abdul A Web-based Consolidated Geotechnical Site Investigation (CoGSI) of Sarawak Soils [ Vol.15, Issue 1 - Spring Year 2022]
  • Karimi nasab.Mehdi Multiple Batch Sizing through Batch Size Smoothing [ Vol.2, Issue 2 - Spring Year 2009]
  • Karimi Taklo.Salim Analysis of Causal Relationships Effective Factors on the Green Supplier Selection in Health Centers Using the Intuitionistic Fuzzy Cognitive Map (IFCM) Method [ Vol.15, Issue 1 - Spring Year 2022]
  • Karimi.Hamid An Exact Algorithm for the Mode Identity Project Scheduling Problem [ Vol.5, Issue 10 - Spring Year 2012]
  • Karimi.Marzieh Optimizing a Fuzzy Green p-hub Centre Problem Using Opposition Biogeography Based Optimization [ Vol.11, Issue 1 - Spring Year 2018]
  • karimi.toraj Developing a Risk Management Model for Banking Software Development Projects Based on Fuzzy Inference System [ Vol.13, Issue 2 - Autumn Year 2020]
  • Kassim.Rahimah Implementation of Internet of Things in the Manufacturing Value Chain: A Comprehensive Study in Industry of Piping [ Vol.17, Issue 1 - Spring Year 2024]
  • Kataiev.A. Competitiveness of The Company on The Market: Analytical Method of Assessment and The Phenomenon of The Impact of Corruption in Ukraine [ Vol.14, Issue 3 - Summer Year 2021]
  • Katiyar.Jitendra Multi-objective Optimization of Turning of Titanium Alloy Under Minimum Quantity Lubrication [ Vol.15, Issue 1 - Spring Year 2022]
  • Kaveh.Farshad A Strategic and Operational Framework for Pre-Disaster Management Considering Sustainability, Resilience, and Smart City Using Multi-Criteria Decision-Making and Mathematical Optimization [ Vol.17, Issue 2 - Autumn Year 2024]
  • kazemi matin.reza Two-stage Production Systems under Variable Returns to Scale Technology: A DEA Approach [ Vol.3, Issue 5 - Spring Year 2010]
  • kazemi matin.reza A Non-radial Approach for Setting Integer-valued Targets in Data Envelopment Analysis [ Vol.4, Issue 8 - Summer Year 2011]
  • kazemi matin.reza DEA with Missing Data: An Interval Data Assignment Approach [ Vol.8, Issue 17 - Spring Year 2015]
  • Kazemi Matin.Reza Efficiency evaluation of wheat farming: a network data envelopment analysis approach [ Vol.9, Issue 20 - Autumn Year 2016]
  • Kazemi Matin.Reza A Ratio-Based Efficiency Measurement for Ranking Multi-Stage Production Systems in DEA [ Vol.11, Issue 1 - Spring Year 2018]
  • kazemi.abolfazal Modelling Customer Attraction Prediction in Customer Relation Management using Decision Tree: A Data Mining Approach [ Vol.4, Issue 9 - Autumn Year 2011]
  • kazemi.abolfazal A Fuzzy Goal Programming Model for Efficient Portfolio Selection. [ Vol.10, Issue 22 - Autumn Year 2017]
  • kazemi.abolfazal A cost-oriented model for multi-manned assembly line balancing problem [ Vol.6, Issue 13 - Autumn Year 2013]
  • Kazemi.Abolfazl A New Algorithm for Optimization of Fuzzy Decision Tree in Data Mining [ Vol.4, Issue 7 - Spring Year 2011]
  • Kazemi.Abolfazl Meta-heuristic Algorithms for an Integrated Production-Distribution Planning Problem in a Multi-Objective Supply Chain [ Vol.6, Issue 12 - Spring Year 2013]
  • Kazemi.Abolfazl A multi-objective evolutionary approach for integrated production-distribution planning problem in a supply chain network [ Vol.7, Issue 14 - Spring Year 2014]
  • Kazemi.Zeinab Multi-objective Optimization of Blood Supply Network Using the Meta-Heuristic Algorithms [ Vol.17, Issue 2 - Autumn Year 2024]
  • Kedir.Abdelkader Multiple Items Supplier Selection, Economic Lot-sizing, and Order Allocation Under Quantity Discount: A Genetic Algorithm Approach [ Vol.16, Issue 2 - Autumn Year 2023]
  • Keramatpour.Mehdi Phase-II Monitoring of AR (1) Autocorrelated Polynomial Profiles [ Vol.7, Issue 14 - Spring Year 2014]
  • Keshavarz-Ghorbani.Fatemeh A Bi-objective Non-linear Approach for Determining the Ordering Strategy for Group B in ABC Analysis Inventory [ Vol.15, Issue 1 - Spring Year 2022]
  • Keung Wong.Wing Enhancing Ethic Integrity and Human Resource Development to Build a Green Banking Business Model in Indonesia [ Vol.17, Issue 2 - Autumn Year 2024]
  • Khademi Zare.Hasan VMI-type Supply Chains: a Brief Review [ Vol.7, Issue 14 - Spring Year 2014]
  • Khademi-Zare.Hassan Implementing Bounded Linear Programming and Analytical Network Process Fuzzy Models to Motivate Employees: a Case Study [ Vol.11, Issue 2 - Autumn Year 2018]
  • khakzar Bafruei.Morteza A Bi-Objective Airport Gate Scheduling with Controllable Processing Times Using Harmony Search and NSGA-II Algorithms [ Vol.11, Issue 1 - Spring Year 2018]
  • Khalaj.Mehran Developing and solving the multi-objective flexible and sustainable job shop scheduling problem with reverse flow and job rotation considerations in uncertain situations [ Vol.16, Issue 2 - Autumn Year 2023]
  • khalili damghani.kaveh Planning for Medical Emergency Transportation Vehicles during Natural Disasters [ Vol.13, Issue 2 - Autumn Year 2020]
  • khalili damghani.kaveh A New School Bus Routing Problem Considering Gender Separation, Special Students and Mix Loading: A Genetic Algorithm Approach [ Vol.14, Issue 2 - Autumn Year 2021]
  • khalili damghani.kaveh A Three-Echelon Multi-Objective Multi-Period Multi-Product Supply Chain Network Design Problem: A Goal Programming Approach [ Vol.10, Issue 21 - Spring Year 2017]
  • Khalili.Majid A Hybrid Unconscious Search Algorithm for Mixed-model Assembly Line Balancing Problem with SDST, Parallel Workstation and Learning Effect [ Vol.13, Issue 2 - Autumn Year 2020]
  • Khalili.Majid Using Electromagnetism Algorithm for Determining the Number of kanbans in a Multi-stage Supply Chain System [ Vol.3, Issue 6 - Autumn Year 2010]
  • khalili.saeed The Optimal Number of Hospital Beds Under Uncertainty: A Costs Management Approach [ Vol.11, Issue 2 - Autumn Year 2018]
  • Khan.Nohman Types of welding process and relationship with defective rate in structural fabrication for oil & gas project [ Vol.16, Issue 1 - Spring Year 2023]
  • Khan.Nohman Critical success factors for implementation of quality improvement initiative [ Vol.16, Issue 1 - Spring Year 2023]
  • Khan.Nohman The impact of work from home on productivity among manufacturing industry workers during MCO [ Vol.16, Issue 1 - Spring Year 2023]
  • Khani.Alireza A bi-objective mathematical model for the patient appointment scheduling problem in outpatient chemotherapy clinics using Fuzzy C-means clustering: A case study [ Vol.15, Issue 2 - Autumn Year 2022]
  • Khannan. Muhammad Shodiq Abdul Factor Analysis of SME Owner Intention to Join Collaborative Manufacturing Networks Using Structural Equation Modeling [ Vol.17, Issue 2 - Autumn Year 2024]
  • khatibi.Sananz A Bi-Objective Airport Gate Scheduling with Controllable Processing Times Using Harmony Search and NSGA-II Algorithms [ Vol.11, Issue 1 - Spring Year 2018]
  • Khedmati.Majid Three Approaches to Time Series Forecasting of Petroleum Demand in OECD Countries [ Vol.11, Issue 2 - Autumn Year 2018]
  • Kheildar.Fatemeh Humanitarian Smart Supply Chain: Classification and New Trends for Future Research [ Vol.16, Issue 2 - Autumn Year 2023]
  • Kheirkhah.Amir Saman Designing Stochastic Cell Formation Problem Using Queuing Theory [ Vol.8, Issue 18 - Autumn Year 2015]
  • Khidrani.Attaullah Electricity theft detection in Power utilities using Bagged CHAID-Based classification Trees [ Vol.15, Issue 2 - Autumn Year 2022]
  • Khorram.Esmaile A Public Bicycle Sharing System Considering Renting and Middle Stations [ Vol.13, Issue 2 - Autumn Year 2020]
  • Khozouie.Nasim Electrical Energy Management of Industrial Consumers to Increase Profitability with an Optimal Control Strategy - a case study [ Vol.16, Issue 2 - Autumn Year 2023]
  • Khozouie.Nasim Optimal fault-location in smart grids with bfa and ts algorithms with the approach of reducing losses and network costs [ Vol.16, Issue 1 - Spring Year 2023]
  • Khozouie.Nasim Optimization of FACTS devices to reduce losses in transmission networks using HSA [ Vol.16, Issue 2 - Autumn Year 2023]
  • khubyari.hamed A combined transportation model for the fruit and vegetable supply chain network [ Vol.15, Issue 2 - Autumn Year 2022]
  • kia.reza A simulated annealing algorithm to determine a group layout and production plan in a dynamic cellular manufacturing system [ Vol.7, Issue 14 - Spring Year 2014]
  • Kiani.Mohammad Javad Optimal fault-location in smart grids with bfa and ts algorithms with the approach of reducing losses and network costs [ Vol.16, Issue 1 - Spring Year 2023]
  • Kiani.Mohammad Javad Electrical Energy Management of Industrial Consumers to Increase Profitability with an Optimal Control Strategy - a case study [ Vol.16, Issue 2 - Autumn Year 2023]
  • Kianpour.Parsa DOE-based enhanced genetic algorithm for unrelated parallel machine scheduling to minimize earliness/tardiness costs [ Vol.16, Issue 2 - Autumn Year 2023]
  • Kitaw.Daniel Knowledge Diffusion to Workplace Safety and Health Improvement [ Vol.10, Issue 21 - Spring Year 2017]
  • Kitaw.Daniel DEVELOPMENT OF PRODUCTIVITY MEASUREMENT AND ANALYSIS FRAMEWORK FOR MANUFACTURING COMPANIES [ Vol.10, Issue 22 - Autumn Year 2017]
  • Kitaw.Daniel A TQM and JIT Integrated Continuous Improvement Model For Organizational Success: An Innovative Framework [ Vol.10, Issue 22 - Autumn Year 2017]
  • Kitaw.Daniel Enhancing Basic Metal Industry Global Competitiveness Through Total Quality Management, Supply Chain Management & Just- In -Time [ Vol.13, Issue 2 - Autumn Year 2020]
  • kiyany.morteza Scheduling of a flexible flow shop with multiprocessor task by a hybrid approach based on genetic and imperialist competitive algorithms [ Vol.6, Issue 13 - Autumn Year 2013]
  • Klym.Nadiia Economic Growth of Regions of Ukraine in Conditions of Disproportional Regional Development [ Vol.15, Issue 1 - Spring Year 2022]
  • Kramarenko.Iryna The Influence of Globalization Processes on Forecasting the Activities of Market Entities [ Vol.15, Issue 1 - Spring Year 2022]
  • Krishnan.K. Sarojani Investigating Basic Requirement Regulations, Internal Environment, and their Impact on Performance of Retirement Homes [ Vol.15, Issue 2 - Autumn Year 2022]
  • Krishnan.Krishna DOE-based enhanced genetic algorithm for unrelated parallel machine scheduling to minimize earliness/tardiness costs [ Vol.16, Issue 2 - Autumn Year 2023]
  • Kumar.Jitendra Development of a novel lot sizing model with variable lead time in supply chain environment [ Vol.10, Issue 22 - Autumn Year 2017]
  • Kusrini.Elisa The Influence of Logistics Performance on Company Performance in the Small and Medium Industry [ Vol.17, Issue 1 - Spring Year 2024]
  • Kusrini.Elisa DPSIR Framework of Global Food Loss and Waste: Recommended Sustainable Intervention for Indonesia [ Vol.17, Issue 2 - Autumn Year 2024]
  • Kusuma.Budhi Research development of logistic efficiency [ Vol.16, Issue 1 - Spring Year 2023]

L

  • Lam.S S Steam System Optimization at Palm Oil Mill: Case Study in Sabah, Malaysia [ Vol.15, Issue 2 - Autumn Year 2022]
  • Landau.Kurt The Effects of Grasp Conditions on Maximal Acceptable Combined Forces (pushing and pinch forces) for Manual Insertion of Snap Fasteners [ Vol.7, Issue 15 - Autumn Year 2014]
  • Larizadeh.Razieh An Integrated Bi-Objective Mathematical Model for Minimizing Take-off Delay and Passenger Dissatisfaction [ Vol.15, Issue 1 - Spring Year 2022]
  • Larki.Hossein Solving the Multiple Traveling Salesman Problem by a Novel Meta-heuristic Algorithm [ Vol.7, Issue 16 - Winter Year 2014]
  • Latief.Yusuf Agricultural Infrastructure Funding Assessment: Research Opportunities and Trends [ Vol.17, Issue 1 - Spring Year 2024]
  • Levkovska.Lyudmila Evaluation of the Efficiency of the Housing and Utilities Sector and Management of its Investment Framework in Conditions of Authorities Decentralization [ Vol.15, Issue 1 - Spring Year 2022]
  • Levkovska.Lyudmila Development Trends and Regualtion Peculiarities of the Housing and Utility Sector in Terms of the Resource Efficiency [ Vol.15, Issue 1 - Spring Year 2022]
  • Liaw.Ching-Fang Two-Machine Open Shop Scheduling with Proportionally Deteriorating Jobs and Makespan Objective [ Vol.15, Issue 2 - Autumn Year 2022]
  • Lotfi.M. Virtual alliance in hospital network for operating room scheduling: Benders decomposition [ Vol.17, Issue 2 - Autumn Year 2024]
  • Luo.Yong Making Optimal Decisions of Assembly Products in Supply Chain [ Vol.4, Issue 8 - Summer Year 2011]

M

  • Müller.Moritz A Community-Based Qualitative Vulnerability Assessment Tools for Rivers in Developing Participatory Response to Land-Use Changes [ Vol.17, Issue 1 - Spring Year 2024]
  • madahi.reza Determining the Best Combination of Perspective indicators of Balanced Scorecard by using Game Theory [ Vol.14, Issue 1 - Spring Year 2021]
  • mahdavi.iraj The Preemptive Just-in-time Scheduling Problem in a Flow Shop Scheduling System [ Vol.12, Issue 2 - Autumn Year 2019]
  • mahdavi.iraj Cell forming and cell balancing of virtual cellular manufacturing systems with alternative processing routes using genetic algorithm [ Vol.9, Issue 20 - Autumn Year 2016]
  • mahdavi.iraj Designing an integrated production/distribution and inventory planning model of fixed-life perishable products [ Vol.9, Issue 19 - Spring Year 2016]
  • mahdavi.iraj An integrated model of cellular manufacturing and supplier selection considering product quality [ Vol.10, Issue 22 - Autumn Year 2017]
  • mahdavi.iraj A Public Bicycle Sharing System Considering Renting and Middle Stations [ Vol.13, Issue 2 - Autumn Year 2020]
  • Mahdavi-Amiri.Nezam A Public Bicycle Sharing System Considering Renting and Middle Stations [ Vol.13, Issue 2 - Autumn Year 2020]
  • Mahdi.Walaa Assessment of Wind Energy Potential in Green-Mountain, Libya [ Vol.16, Issue 2 - Autumn Year 2023]
  • Mahmoodi Darani.Narges An Effective Genetic Algorithm for Solving the Multiple Traveling Salesman Problem [ Vol.4, Issue 8 - Summer Year 2011]
  • Mahmoodi.Anwar (1, T) policy for a Two-echelon Inventory System with Perishable-on-the-Shelf Items [ Vol.7, Issue 16 - Winter Year 2014]
  • Mahmoodirad.Ali Developing a Fuzzy Green Supply Chain Management Problem Considering Location Allocation Routing Problem: Hybrid Meta-Heuristic Approach [ Vol.15, Issue 1 - Spring Year 2022]
  • mahmoudi.amin Analysing Price, Quality and Lead Time Decisions with the Hybrid Solution Method of Fuzzy Logic and Genetic Algorithm [ Vol.5, Issue 10 - Spring Year 2012]
  • Mahmud.Shahed Fuzzy Multi-Objective Linear Programming for Project Management Decision under Uncertain Environment with AHP Based Weighted Average Method [ Vol.9, Issue 20 - Autumn Year 2016]
  • Mahpour.Ali Reza A Combined Fuzzy Logic and Analytical Hierarchy Process Method for Optimal Selection and Locating of Pedestrian Crosswalks [ Vol.11, Issue 2 - Autumn Year 2018]
  • Malaki.مهدی A Comparative Study of Four Evolutionary Algorithms for Economic and Economic-Statistical Designs of MEWMA Control Charts [ Vol.4, Issue 9 - Autumn Year 2011]
  • Maleki Vishkaei.Behzad A Public Bicycle Sharing System Considering Renting and Middle Stations [ Vol.13, Issue 2 - Autumn Year 2020]
  • Manav.Omkar Multi-objective Optimization of Turning of Titanium Alloy Under Minimum Quantity Lubrication [ Vol.15, Issue 1 - Spring Year 2022]
  • Manavizadeh.Neda A New Mathematical Model for the Green Vehicle Routing Problem by Considering a Bi-Fuel Mixed Vehicle Fleet [ Vol.13, Issue 2 - Autumn Year 2020]
  • MANGIHUT SIMATUPANG.TOGAR A Dynamics Approach for Maturity Assessment of Hospital Supply Chain Management [ Vol.17, Issue 1 - Spring Year 2024]
  • Mansor.Nusaibah Absorptive Capacity Effects on the Relationship between Foreign Direct Investment and Economic Growth in Malaysia [ Vol.16, Issue 2 - Autumn Year 2023]
  • Mansor.Zuraina binti Dato The effect of TQM practices on job satisfaction in higher education institutes. A systematic literature review from the last two decades [ Vol.16, Issue 1 - Spring Year 2023]
  • Mansur.Agus Minimizing Packed Red Cell Shortages in the Blood Supply Chain: A Discrete Simulation and Taguchi-based Approach [ Vol.17, Issue 2 - Autumn Year 2024]
  • Marimin.Marimin Conceptual model to manage supply chain performance (case study: pangasius.sp agroindustry in indonesia) [ Vol.16, Issue 1 - Spring Year 2023]
  • MARZAK.Zahira Forecasting Seasonal and Trend-Driven Data: A Comparative Analysis of Classical Techniques [ Vol.16, Issue 2 - Autumn Year 2023]
  • Masehian.Ellips Designing Solvable Graphs for Multiple Moving Agents [ Vol.2, Issue 2 - Spring Year 2009]
  • Mashayekhi.Ali Naghi Developing a Framework for Analyzing the Causes of Corruption [ Vol.15, Issue 1 - Spring Year 2022]
  • masoumi.behrooz A Honey Bee Algorithm To Solve Quadratic Assignment Problem [ Vol.4, Issue 9 - Autumn Year 2011]
  • masoumi.behrooz Participative Biogeography-Based Optimization [ Vol.12, Issue 1 - Spring Year 2019]
  • Matebu.Amare DEVELOPMENT OF PRODUCTIVITY MEASUREMENT AND ANALYSIS FRAMEWORK FOR MANUFACTURING COMPANIES [ Vol.10, Issue 22 - Autumn Year 2017]
  • Mayasari.Ratna Determining and forecasting oee based on reliability and maintainability using polynomial regression and neural networks [ Vol.17, Issue 2 - Autumn Year 2024]
  • Mazaheri.Moezodin Optimizing Outsourcing Decisions in the Service Sectors and Businesses: A Comprehensive DSS Model for Effective Ranking and Selection [ Vol.17, Issue 1 - Spring Year 2024]
  • Mazlan.Faris Hakim Critical success factors for implementation of quality improvement initiative [ Vol.16, Issue 1 - Spring Year 2023]
  • Md Sapry.Hairul Rizad Investigation of Customer Purchase Intention towards Car Battery On-Site Delivery Services [ Vol.15, Issue 2 - Autumn Year 2022]
  • Md Sapry.Hairul Rizad The elimination of plastic bags: A customer perspective on logistics challenges [ Vol.15, Issue 2 - Autumn Year 2022]
  • medghalchi.ali Investigating the potential to improve the efficiency of iran's road bridge management system from the point of view of bridge maintenance experts [ Vol.16, Issue 1 - Spring Year 2023]
  • Mehdiloo.Mahmood Complete Closest-Target Based Directional FDH Measures of Efficiency in DEA [ Vol.5, Issue 11 - Autumn Year 2012]
  • Mehdizadeh.Esmaeil Using Hybrid Fuzzy PROMETHEE II and Fuzzy Binary Goal Programming for Risk Ranking: A Case Study of Highway Construction Projects [ Vol.4, Issue 9 - Autumn Year 2011]
  • Mehdizadeh.Esmaeil Three Metaheuristic Algorithms for Solving the Multi-item Capacitated Lot-sizing Problem with Product Returns and Remanufacturing [ Vol.7, Issue 16 - Winter Year 2014]
  • Mehdizadeh.Esmaeil A Multi-level Capacitated Lot-sizing Problem with Safety Stock Deficit and Production Manners: A Revised Simulated Annealing [ Vol.6, Issue 13 - Autumn Year 2013]
  • Mehdizadeh.Esmaeil A New Hybrid Algorithm to Optimize Stochastic-fuzzy Capacitated Multi-Facility Location-allocation Problem [ Vol.4, Issue 7 - Spring Year 2011]
  • Mehdizadeh.Esmaeil Fuzzy Particle Swarm Optimization Algorithm for a Supplier Clustering Problem [ Vol.1, Issue 1 - Autumn Year 2008]
  • Mehdizadeh.Esmaeil Design of a Mathematical Model for Logistic Network in a Multi-Stage Multi-Product Supply Chain Network and Developing a Metaheuristic Algorithm [ Vol.5, Issue 10 - Spring Year 2012]
  • Mehdizadeh.Esmaeil An Algorithm Based on Theory of Constraints and Branch and Bound for Solving Integrated Product-Mix-Outsourcing Problem [ Vol.12, Issue 1 - Spring Year 2019]
  • Mehdizadeh.Esmaeil A New Bi-objective Mathematical Model to Optimize Reliability and Cost of Aggregate Production Planning System in a Paper and Wood Company [ Vol.13, Issue 1 - Spring Year 2020]
  • Mehdizadeh.Esmaeil Solving a Multi-Item Supply Chain Network Problem by Three Meta-heuristic Algorithms [ Vol.14, Issue 2 - Autumn Year 2021]
  • mehrparvar.maryam Investigating factors affecting the acceptance of m-government based on fuzzy cognitive map in Iran [ Vol.16, Issue 2 - Autumn Year 2023]
  • MEIABADI.MOHAMMAD SALEH Optimization of Plastic Injection Molding Process by Combination of Artificial Neural Network and Genetic Algorithm [ Vol.6, Issue 13 - Autumn Year 2013]
  • meraha.teklewold Productivity Improvement through Line Balancing by Using Simulation Modeling [ Vol.13, Issue 1 - Spring Year 2020]
  • Merati.Masoud A combined Model design for developing and optimizing product platform architecture considering parameters of DFV, DFC, DFSC, and DFAv, case study: phased array radar [ Vol.16, Issue 2 - Autumn Year 2023]
  • Merati.Masoud Appraisal of industrial plans with Expected Monetary Value approach using FAHP in the ceramic and tile industry [ Vol.17, Issue 1 - Spring Year 2024]
  • meresa.aregawi yemane Performance Measurement and Improvement of Healthcare Service Using Discrete Event Simulation in Bahir Dar Clinic [ Vol.14, Issue 2 - Autumn Year 2021]
  • meresa.aregawi yemane Productivity Improvement of BOB T-shirt through Line Balancing Using Control Limit analysis and discrete event simulation (Case study: - MAA Garment and Textile Factory) [ Vol.14, Issue 1 - Spring Year 2021]
  • meresa.aregawi yemane Productivity Improvement through Line Balancing by Using Simulation Modeling [ Vol.13, Issue 1 - Spring Year 2020]
  • Mgbemena.Chinedum Production Constraints Modelling: A Tactical Review Approach [ Vol.13, Issue 1 - Spring Year 2020]
  • Mhalapitsa.Botshelo Development and validation of an integer linear programming model for the lecturer-to-course assignment problem [ Vol.16, Issue 1 - Spring Year 2023]
  • MirKiaei Tamijani.Seyeded Hanieh Providing an Optimal Model of Affective Attitude in Customers' Purchasing Decisions in Industrial Markets [ Vol.15, Issue 1 - Spring Year 2022]
  • mirnezami.maryam Developing a Multi-objective Mathematical Model for Dynamic Cellular Manufacturing Systems [ Vol.4, Issue 7 - Spring Year 2011]
  • Mirzapour Al-e-Hashema.Seyed M.J. An Innovation Measurement Model Based on THIO Classification: An Automotive Case Study [ Vol.11, Issue 2 - Autumn Year 2018]
  • mirzapour.mohamadjavad Vehicle routing problem with cross-docking in a sustainable supply chain for perishable products [ Vol.17, Issue 2 - Autumn Year 2024]
  • mirzazadeh.mohamad A Honey Bee Algorithm To Solve Quadratic Assignment Problem [ Vol.4, Issue 9 - Autumn Year 2011]
  • Modares.Azam Applying a multi-criteria group decision-making method in a probabilistic environment for supplier selection (Case study: Urban railway in Iran) [ Vol.16, Issue 1 - Spring Year 2023]
  • Modares.Mohammad Traffic Flow Analysis Based on Queuing Models [ Vol.2, Issue 2 - Spring Year 2009]
  • Mohabbatdar.samira Optimal Manufacturer-Retailer Policies in a Supply Chain with Defective Product and Price Dependent Demand [ Vol.9, Issue 19 - Spring Year 2016]
  • mohagheghian.elahe Two-echelon Supply Chain Considering Multiple Retailers with Price and Promotional Effort Sensitive Non-linear Demand [ Vol.11, Issue 2 - Autumn Year 2018]
  • Mohamad Ayob.Ahmad Faisal Enhancing Production Process Performance in Traditional Shipyards: An Integrated Approach for Waste Identification and Performance Optimization [ Vol.16, Issue 2 - Autumn Year 2023]
  • Mohamad Ayob.Ahmad Faisal Continuous improvement strategy in traditional shipyard industry: a holistic approach towards sustainability [ Vol.16, Issue 1 - Spring Year 2023]
  • Mohamad Fadeli.Shazlen Farhana The barriers and critical success factor for implementing lean manufacturing at SMEs [ Vol.16, Issue 1 - Spring Year 2023]
  • Mohamadghasemi.Amir A note on "An interval type-2 fuzzy extension of the TOPSIS method using alpha cuts" [ Vol.13, Issue 2 - Autumn Year 2020]
  • Mohamadi.Mohsen Process Capability Analysis in the Presence of Autocorrelation [ Vol.4, Issue 9 - Autumn Year 2011]
  • Mohamadi.Mohsen Process Capability Analysis in the Presence of Autocorrelation [ Vol.6, Issue 12 - Spring Year 2013]
  • Mohammadi.Seyed Erfan A hybrid intuitionistic fuzzy multi-criteria group decision making approach for supplier selection [ Vol.9, Issue 20 - Autumn Year 2016]
  • Mohammaditabar.Davood An inventory lot Sizing model of deteriorating items with time and price dependent demand, by considering the time value of money [ Vol.17, Issue 1 - Spring Year 2024]
  • mohammadnejad.mohammad A new mathematical model for the closed-loop supply chains considering pricing for product, a fleet of heterogeneous vehicles, and inventory costs [ Vol.10, Issue 21 - Spring Year 2017]
  • Mohammadzadeh.Arash Forecasting the Cost of Water Using a Neural Network Method in the Municipality of Isfahan [ Vol.5, Issue 11 - Autumn Year 2012]
  • Mohd Ali.Khairul Anuar Critical success factors for implementation of quality improvement initiative [ Vol.16, Issue 1 - Spring Year 2023]
  • Mohd Daril.Mohd Amran The impact of work from home on productivity among manufacturing industry workers during MCO [ Vol.16, Issue 1 - Spring Year 2023]
  • Mohd Daril.Mohd Amran Types of welding process and relationship with defective rate in structural fabrication for oil & gas project [ Vol.16, Issue 1 - Spring Year 2023]
  • Mohd Daril.Mohd Amran The barriers and critical success factor for implementing lean manufacturing at SMEs [ Vol.16, Issue 1 - Spring Year 2023]
  • Mohd Daril.Mohd Amran Critical success factors for implementation of quality improvement initiative [ Vol.16, Issue 1 - Spring Year 2023]
  • Mohd Sam.Mohd Fazli Evaluation on Material Structural Scarcity Resource Towards Sustainable Supply Chain Performance [ Vol.15, Issue 2 - Autumn Year 2022]
  • Mohd.Mohd Norzali Haji Electricity theft detection in Power utilities using Bagged CHAID-Based classification Trees [ Vol.15, Issue 2 - Autumn Year 2022]
  • Moheb Rabbani.Saeid Influence of fuzzy Goal Programming in Production Optimization Case study: Cement Industry [ Vol.3, Issue 6 - Autumn Year 2010]
  • mohemmi.zahra Investigating factors affecting the acceptance of m-government based on fuzzy cognitive map in Iran [ Vol.16, Issue 2 - Autumn Year 2023]
  • Mohsendokht.Mehdi Overcoming the uncertainty in a research reactor LOCA in level-1 PSA; Fuzzy based fault-tree/event-tree analysis [ Vol.13, Issue 2 - Autumn Year 2020]
  • Mohyadini.Fatemeh Analysis of Causal Relationships Effective Factors on the Green Supplier Selection in Health Centers Using the Intuitionistic Fuzzy Cognitive Map (IFCM) Method [ Vol.15, Issue 1 - Spring Year 2022]
  • mola alizade zavardehi.saber Constrained portfolio selection model at considering risk-adjusted measure by using the Genetic Network Programming [ Vol.17, Issue 2 - Autumn Year 2024]
  • Mollaie.Ammar Developing a Transfer Point Location Problem Considering Normal Demands Distribution [ Vol.15, Issue 1 - Spring Year 2022]
  • MONG.SYLVIA The impacts and opportunities of SALCRA plantation to the landowner’s socio-economic and labour supply: a case study of SALCRA estates in saratok district [ Vol.16, Issue 1 - Spring Year 2023]
  • Moradi Tadi.Azam Developing Fuzzy Tool Capability Measurement System Analysis [ Vol.14, Issue 1 - Spring Year 2021]
  • MORALES RODRIGUEZ.MARIO ALBERTO Industry 4.0- Applications of machine learning in the field of industrial engineering: Systematic review of the literature [ Vol.17, Issue 2 - Autumn Year 2024]
  • Mostafaeipour.Ali A Novel Innovative Design Improvement using Value Engineering Technique: a Case Study [ Vol.9, Issue 19 - Spring Year 2016]
  • Mostafaeipour.Ali Development of a novel lot sizing model with variable lead time in supply chain environment [ Vol.10, Issue 22 - Autumn Year 2017]
  • Mostafaeipour.Ali Implementing Bounded Linear Programming and Analytical Network Process Fuzzy Models to Motivate Employees: a Case Study [ Vol.11, Issue 2 - Autumn Year 2018]
  • mostafayi.sobhan Healthcare Districting Optimization Using Gray Wolf Optimizer and Ant Lion Optimizer Algorithms (case study: South Khorasan Healthcare System in Iran) [ Vol.12, Issue 1 - Spring Year 2019]
  • Motahari Farimani.Nasser Applying a multi-criteria group decision-making method in a probabilistic environment for supplier selection (Case study: Urban railway in Iran) [ Vol.16, Issue 1 - Spring Year 2023]
  • motamedi.majid Designing a Robust Model of the Blood Supply Chain in Conditions of Demand Uncertainty [ Vol.17, Issue 2 - Autumn Year 2024]
  • MOUATASSIM.Salma Forecasting Seasonal and Trend-Driven Data: A Comparative Analysis of Classical Techniques [ Vol.16, Issue 2 - Autumn Year 2023]
  • Mousavi Loghman.Sayyede Ashraf A Novel Model for the Analysis of Interactions Between Governments and Agricultures in a Study of Social Beneficial Externalities Based on the Stackelberg Game: A Case Study on Cotton Production [ Vol.11, Issue 2 - Autumn Year 2018]
  • Mousavi.S.M Designing a Robust Model of the Blood Supply Chain in Conditions of Demand Uncertainty [ Vol.17, Issue 2 - Autumn Year 2024]
  • Mousavi.Seyed A New Analysis of Critical Paths in Mega Projects with Interval Type-2 Fuzzy Activities by Considering Time, Cost, Risk, Quality, and Safety Factors [ Vol.15, Issue 1 - Spring Year 2022]
  • Mousavi.Seyed Meysam ELECTRE I-based group decision methodology with risk preferences in an imprecise setting for flexible manufacturing systems [ Vol.14, Issue 1 - Spring Year 2021]
  • Movahedi.Mohammad Mehdi Designing Tolerance of Assembled Components Using Weibull Distribution [ Vol.12, Issue 2 - Autumn Year 2019]
  • Mozafari.Marzieh A Game Theoretical Approach to Optimize Policies of Government Under the Cartel of Two Green and Non-green Supply Chains [ Vol.12, Issue 2 - Autumn Year 2019]
  • Mozaffari.Mohammad Mahdi Neurological Analysis of Consumer Behavior in Shopping Malls Using EEG [ Vol.9, Issue 20 - Autumn Year 2016]
  • Mozaffari.Mohammad Mahdi Optimal Localization of Shopping Centers Using Metaheuristic Genetic Algorithm [ Vol.13, Issue 1 - Spring Year 2020]
  • Mozaffari.Mohammad Mahdi Optimizing the Prediction Model of Stock Price in Pharmaceutical Companies Using Multiple Objective Particle Swarm Optimization Algorithm (MOPSO) [ Vol.14, Issue 2 - Autumn Year 2021]
  • Mulyono.M. Rezki Agricultural Infrastructure Funding Assessment: Research Opportunities and Trends [ Vol.17, Issue 1 - Spring Year 2024]
  • Mustafa.Mohd. Wazir Electricity theft detection in Power utilities using Bagged CHAID-Based classification Trees [ Vol.15, Issue 2 - Autumn Year 2022]
  • Mustapa.Hasnah Implementation of Internet of Things in the Manufacturing Value Chain: A Comprehensive Study in Industry of Piping [ Vol.17, Issue 1 - Spring Year 2024]

N

  • Nabiyev.Vasif Trajectory Planning Using High Order Polynomials under Acceleration Constraint [ Vol.10, Issue 21 - Spring Year 2017]
  • nader abadi.sedighe A Multi-Mode Resource-Constrained Optimization of Time-Cost Trade-off Problems in Project Scheduling Using a Genetic Algorithm [ Vol.4, Issue 8 - Summer Year 2011]
  • Naderi.Bahman Economic Lot Sizing and Scheduling in Distributed Permutation Flow Shops [ Vol.12, Issue 1 - Spring Year 2019]
  • Naderi-Boldaji.Mojtaba Reliability Analysis of a Mounted Moldboard Plow Bottom Standard using the FORM Method [ Vol.15, Issue 2 - Autumn Year 2022]
  • Nadiia.Davydenko Assessment of the Components of Financial Potential of the Regions of Ukraine [ Vol.14, Issue 3 - Summer Year 2021]
  • Nadiia.Davydenko The Influence Of The Gross Regional Product On The Formation Of The Financial Potential Of The Region [ Vol.14, Issue 3 - Summer Year 2021]
  • najafi taroujani.sayed ismaeel A Mathematical Model and a Solution Method for Hybrid Flow Shop Scheduling [ Vol.5, Issue 10 - Spring Year 2012]
  • Najafi.Amir Analysis of Customer's Expectations and Satisfaction in the Zanjan Municipality Using Fuzzy Multi-Criteria Decision Making (FMCDM) Approach [ Vol.10, Issue 21 - Spring Year 2017]
  • Najafi.Seyed Esmaeil Solving a Multi-Item Supply Chain Network Problem by Three Meta-heuristic Algorithms [ Vol.14, Issue 2 - Autumn Year 2021]
  • Najafi.seyed Esmaeil, A combined transportation model for the fruit and vegetable supply chain network [ Vol.15, Issue 2 - Autumn Year 2022]
  • Najamudin.S A Steam System Optimization at Palm Oil Mill: Case Study in Sabah, Malaysia [ Vol.15, Issue 2 - Autumn Year 2022]
  • Nakanishi.H Conceptual Framework for Implementing Bottom-Up Kaizen in the Malaysian Automotive Sector [ Vol.17, Issue 1 - Spring Year 2024]
  • naserolmemar.kianoush An Electronic Readiness Assessment Model for More Efficient Electronic Commerce Adoption by Iranian Small and Medium Contractors [ Vol.15, Issue 2 - Autumn Year 2022]
  • nasiri.mohamadmahdi Vehicle routing problem with cross-docking in a sustainable supply chain for perishable products [ Vol.17, Issue 2 - Autumn Year 2024]
  • Nataliia.Kapinos Improvement of Land Management in Ukraine [ Vol.14, Issue 3 - Summer Year 2021]
  • Naveed.Rai A Community-Based Qualitative Vulnerability Assessment Tools for Rivers in Developing Participatory Response to Land-Use Changes [ Vol.17, Issue 1 - Spring Year 2024]
  • Naveed.Rai Steam System Optimization at Palm Oil Mill: Case Study in Sabah, Malaysia [ Vol.15, Issue 2 - Autumn Year 2022]
  • Naveed.Rai Electricity theft detection in Power utilities using Bagged CHAID-Based classification Trees [ Vol.15, Issue 2 - Autumn Year 2022]
  • Naveed.Rai Factors Affecting the Efficiency of Hydraulic Flushing in Storm System for Sedimentation Control: A Review [ Vol.15, Issue 2 - Autumn Year 2022]
  • Naveed.Rai Performance Analysis of Remanufacturing System Considering Inspection & Grading Policies, Sourcing Policies and Resource Policies Under Multiple Quality Scenarios: Towards Environmental Sustainability [ Vol.15, Issue 2 - Autumn Year 2022]
  • Nayak.Mitali An EOQ Model for Defective Items Under Pythagorean Fuzzy Environment [ Vol.15, Issue 1 - Spring Year 2022]
  • nayebi.mohammad amin A Multi Objective Optimization Approach for Resources Procurement of Bank [ Vol.3, Issue 5 - Spring Year 2010]
  • nazari.abdollah Using the Hybrid Model for Credit Scoring (Case Study: Credit Clients of microloans, Bank Refah-Kargeran of Zanjan, Iran) [ Vol.12, Issue 2 - Autumn Year 2019]
  • Nazemosadat.Seyed Mohammad Reza Reliability Analysis of a Mounted Moldboard Plow Bottom Standard using the FORM Method [ Vol.15, Issue 2 - Autumn Year 2022]
  • Nematizadeh.Sina Optimal Use of Social Media From the Perspective of Brand Equity in Startups with a Data Approach [ Vol.13, Issue 2 - Autumn Year 2020]
  • Nematizadeh.Sina Investigating the Impact of Word of Mouth Advertising on Customer Experience Management in the Dental Equipment Industry Using Fuzzy Analytic Hierarchy Process [ Vol.15, Issue 2 - Autumn Year 2022]
  • Nematolahi.Mohamad reza Reliability Analysis of a Mounted Moldboard Plow Bottom Standard using the FORM Method [ Vol.15, Issue 2 - Autumn Year 2022]
  • Nezhadali.Samaneh Fuzzy Programming for Parallel Machines Scheduling: Minimizing Weighted Tardiness/Earliness and Flow Time through Genetic Algorithm [ Vol.7, Issue 14 - Spring Year 2014]
  • Nikjo.Behzad Meta heuristic for Minimizing Makespan in a Flow-line Manufacturing Cell with Sequence Dependent Family Setup Times [ Vol.7, Issue 16 - Winter Year 2014]
  • Nikkhah Nasab.Mostafa Project Portfolio Selection with the Maximization of Net Present Value [ Vol.6, Issue 12 - Spring Year 2013]
  • Niroomand.Sadegh Developing a Fuzzy Green Supply Chain Management Problem Considering Location Allocation Routing Problem: Hybrid Meta-Heuristic Approach [ Vol.15, Issue 1 - Spring Year 2022]
  • Niyati.Marjan Estimation of Products Final Price Using Bayesian Analysis Generalized Poisson Model and Artificial Neural Networks [ Vol.2, Issue 2 - Spring Year 2009]
  • Nizam.Nurul Evaluation on Material Structural Scarcity Resource Towards Sustainable Supply Chain Performance [ Vol.15, Issue 2 - Autumn Year 2022]
  • Noorossana.Rassoul Design of Accelerated Life Testing Plans for Products Exposed to Random Usage [ Vol.14, Issue 2 - Autumn Year 2021]
  • Noorossana.Rassoul Change Point Estimation of a Process Variance with a Linear Trend Disturbance [ Vol.2, Issue 2 - Spring Year 2009]
  • Nor ‘Azman.Nur Syairah Dazreena The impact of work from home on productivity among manufacturing industry workers during MCO [ Vol.16, Issue 1 - Spring Year 2023]
  • Nordin.Latipah The barriers and critical success factor for implementing lean manufacturing at SMEs [ Vol.16, Issue 1 - Spring Year 2023]
  • Nordin.Nurfaziq Investigation of Customer Purchase Intention towards Car Battery On-Site Delivery Services [ Vol.15, Issue 2 - Autumn Year 2022]
  • Norzura.I. Conceptual Framework for Implementing Bottom-Up Kaizen in the Malaysian Automotive Sector [ Vol.17, Issue 1 - Spring Year 2024]
  • Nouh.Aiman Assessment of Wind Energy Potential in Green-Mountain, Libya [ Vol.16, Issue 2 - Autumn Year 2023]
  • nouhi.khashayar Analysing Price, Quality and Lead Time Decisions with the Hybrid Solution Method of Fuzzy Logic and Genetic Algorithm [ Vol.5, Issue 10 - Spring Year 2012]
  • Nourbakhsh,.Seyed Kamran Identifying the Factors Affecting Consumer Perceptions on Product Safety and Model Presentation (Case study: Home Appliances Consumers) [ Vol.15, Issue 1 - Spring Year 2022]
  • Nourbakhsh.Seyed Kamran Optimal Use of Social Media From the Perspective of Brand Equity in Startups with a Data Approach [ Vol.13, Issue 2 - Autumn Year 2020]
  • Novaliendry.Dony Application of Business Intelligent System in the Realm of Knowledge Distribution to Employees [ Vol.16, Issue 2 - Autumn Year 2023]
  • noviyanti.novi Determination of Motivation, Work Environment, and Work Communication on Performance Through Competence at the Public Health Centers in Batam City [ Vol.16, Issue 2 - Autumn Year 2023]
  • Nurilmala.Mala Conceptual model to manage supply chain performance (case study: pangasius.sp agroindustry in indonesia) [ Vol.16, Issue 1 - Spring Year 2023]

O

  • OKDINAWATI.LIANE A Dynamics Approach for Maturity Assessment of Hospital Supply Chain Management [ Vol.17, Issue 1 - Spring Year 2024]
  • Oktarina.Rienna Optimizing Biomass Synergy: Cost-Effective Reduction of Carbon Footprint in Coal-Fired Power Plants [ Vol.16, Issue 2 - Autumn Year 2023]
  • Olshanska.Oleksandra Social Networks as a Phenomenon of the Information Society [ Vol.14, Issue 3 - Summer Year 2021]
  • Olshanska.Oleksandra Designing a Marketing Strategy for the Development of Industrial Tourism in the Region [ Vol.14, Issue 3 - Summer Year 2021]
  • Orouskhani.Meysam EMCSO: An Elitist Multi-Objective Cat Swarm Optimization [ Vol.11, Issue 2 - Autumn Year 2018]
  • Ostadsharifmemar.Ahmad A Review and Evaluation of Statistical Process Control Methods in Monitoring Process Mean and Variance Simultaneously [ Vol.1, Issue 1 - Autumn Year 2008]

P

  • Padhil.Ahmad Analysis of the influence of price and product performance, on the decision of heavy equipment customer buying excavator products ABC PT. XYZ [ Vol.16, Issue 1 - Spring Year 2023]
  • Panudju.Andreas Conceptual model to manage supply chain performance (case study: pangasius.sp agroindustry in indonesia) [ Vol.16, Issue 1 - Spring Year 2023]
  • Parvaneh.Amin Integrating AHP and data mining for effective retailer segmentation based on retailer lifetime value [ Vol.5, Issue 11 - Autumn Year 2012]
  • parvizi.loabat Investigating the Effect of Product Packaging Design on Attracting Customers about Cosmetic Products with Conjoint Analysis Method [ Vol.15, Issue 1 - Spring Year 2022]
  • pasandide.mohammadreza An Aggregated Supplier Selection Method Based on QFD and TOPSIS (Case Study: A Financial Institution) [ Vol.12, Issue 1 - Spring Year 2019]
  • pasandide.mohammadreza Presenting a Joint Replenishment-location Model Under all-units Quantity Discount and Solving by Genetic Algorithm and Harmony Search Algorithm [ Vol.13, Issue 1 - Spring Year 2020]
  • pasandide.mohammadreza A Continuous Review inventory Control Model within Batch Arrival Queuing Framework: A Parameter-Tuned Imperialist Competitive Algorithm [ Vol.5, Issue 11 - Autumn Year 2012]
  • pasandide.mohammadreza A Multi-Periodic Multi-Product Inventory Control Problem with Discount: GA Optimization Algorithm [ Vol.4, Issue 7 - Spring Year 2011]
  • pasandide.mohammadreza A Bi-objective Optimization for Vendor Managed Inventory Model [ Vol.7, Issue 15 - Autumn Year 2014]
  • pasandide.mohammadreza Layout of Cellular Manufacturing System in Dynamic Condition [ Vol.3, Issue 5 - Spring Year 2010]
  • pasandide.mohammadreza A New Model for Location-Allocation Problem within Queuing Framework [ Vol.3, Issue 6 - Autumn Year 2010]
  • Patnaik.Suchitra An EOQ Model for Defective Items Under Pythagorean Fuzzy Environment [ Vol.15, Issue 1 - Spring Year 2022]
  • Paul.Sanjoy Study and Implementation of Lean Manufacturing in a Garment Manufacturing Company: Bangladesh Perspective [ Vol.4, Issue 7 - Spring Year 2011]
  • Paydar.Mohammadmahdi An integrated model of cellular manufacturing and supplier selection considering product quality [ Vol.10, Issue 22 - Autumn Year 2017]
  • Paydar.Mohammadmahdi Cell forming and cell balancing of virtual cellular manufacturing systems with alternative processing routes using genetic algorithm [ Vol.9, Issue 20 - Autumn Year 2016]
  • Paydar.Mohammadmahdi Scheduling on flexible flow shop with cost-related objective function considering outsourcing options [ Vol.14, Issue 2 - Autumn Year 2021]
  • Paydar.Mohammadmahdi Examining and Prioritizing the Factors Affecting Tourist Absorption for Ecotourism Centers Utilizing MCDM Tools [ Vol.15, Issue 1 - Spring Year 2022]
  • Permana.Intan Dimensions of Market-Sensing Capability Identifying SMEs Created: A Systematic Literature Review [ Vol.16, Issue 2 - Autumn Year 2023]
  • Peter Ou.Jenho Enhancing Ethic Integrity and Human Resource Development to Build a Green Banking Business Model in Indonesia [ Vol.17, Issue 2 - Autumn Year 2024]
  • Piña.Manuel 6 sigma and dmaic method: basic tool teaching and application for beginning practitioners in automotive assembly [ Vol.16, Issue 1 - Spring Year 2023]
  • pilevari.nazanin Agile Supplier Selection In Sanitation Supply Chain Using Fuzzy VIKOR Method [ Vol.10, Issue 21 - Spring Year 2017]
  • Piri.Morteza Investigating Knowledge Management Practices in a Successful Research and Development Organization [ Vol.11, Issue 2 - Autumn Year 2018]
  • PISHVA.Davar Diabetes detection via machine learning using four implemented spanning tree algorithms [ Vol.17, Issue 1 - Spring Year 2024]
  • Polo Triana.Sonia Neural networks for forecasting irregular demand in an Automotive Diagnostic Centre [ Vol.17, Issue 2 - Autumn Year 2024]
  • Ponomarova.Maryna The Influence of Globalization Processes on Forecasting the Activities of Market Entities [ Vol.15, Issue 1 - Spring Year 2022]
  • Poonia.P.K Stochastic analysis of k-out-of-n: G Type of Repairable system in Combination of Subsystems with Controllers and Multi Repair Approach [ Vol.15, Issue 1 - Spring Year 2022]
  • Poorbagheri.Tahereh Vendor Managed Inventory of a Supply Chain under Stochastic Demands [ Vol.8, Issue 18 - Autumn Year 2015]
  • Popadynets.Nazariy The Influence of Globalization Processes on Forecasting the Activities of Market Entities [ Vol.15, Issue 1 - Spring Year 2022]
  • Popadynets.Nazariy Evaluation of the Efficiency of the Housing and Utilities Sector and Management of its Investment Framework in Conditions of Authorities Decentralization [ Vol.15, Issue 1 - Spring Year 2022]
  • Popadynets.Nazariy Development Trends and Regualtion Peculiarities of the Housing and Utility Sector in Terms of the Resource Efficiency [ Vol.15, Issue 1 - Spring Year 2022]
  • Popadynets.Nazariy Forming the Territorial Communities' Local Budgets in Ukraine Under Decentralization: Current Condition and Management Tasks [ Vol.14, Issue 3 - Summer Year 2021]
  • Popadynets.Nazariy Population Spatial Mobility: Monitoring, Methodology of Formation, Features of Regulation [ Vol.14, Issue 3 - Summer Year 2021]
  • pourasadollah.faranak A Multi-Objective Fuzzy Approach to Closed-Loop Supply Chain Network Design with Regard to Dynamic Pricing [ Vol.12, Issue 1 - Spring Year 2019]
  • Pourghader Chobar.Adel Modelling and optimization of a tri-objective Transportation-Location-Routing Problem considering route reliability: using MOGWO, MOPSO, MOWCA and NSGA-II [ Vol.14, Issue 2 - Autumn Year 2021]
  • Pourkarim Guilani.Pedram Using NSGA II Algorithm for a Three Objectives Redundancy Allocation Problem with k-out-of-n Sub-Systems [ Vol.9, Issue 19 - Spring Year 2016]
  • Poursafary.Shahab Developing a Permutation Method Using Tabu Search Algorithm: A Case Study of Ranking Some Countries of West Asia and North Africa Based on Important Development Criteria [ Vol.8, Issue 17 - Spring Year 2015]
  • pourvaziri.hani A Tunned-parameter Hybrid Algorithm for Dynamic Facility Layout Problem with Budget Constraint using GA and SAA [ Vol.7, Issue 15 - Autumn Year 2014]
  • pourvaziri.hani A New Hybrid Parallel Simulated Annealing Algorithm for Travelling Salesman Problem with Multiple Transporters [ Vol.7, Issue 15 - Autumn Year 2014]
  • Putra.Guntur Failure Mode and Effect Analysis Power Plant Boiler [ Vol.11, Issue 2 - Autumn Year 2018]
  • Putri.Astrid Multi-objective optimization of production: A case study on simplex, goal programming, and pareto front models [ Vol.16, Issue 2 - Autumn Year 2023]

Q

  • Qolipour.Mojtaba Development of a novel lot sizing model with variable lead time in supply chain environment [ Vol.10, Issue 22 - Autumn Year 2017]
  • Queshi.Muhammad Imran The barriers and critical success factor for implementing lean manufacturing at SMEs [ Vol.16, Issue 1 - Spring Year 2023]
  • Qurtubi.Qurtubi Storage Zone Functions Optimization in Warehouses: A Systematic Review of Class-Based Storage [ Vol.16, Issue 2 - Autumn Year 2023]
  • Qurtubi.Qurtubi Research development of logistic efficiency [ Vol.16, Issue 1 - Spring Year 2023]
  • Qurtubi.Qurtubi The Influence of Logistics Performance on Company Performance in the Small and Medium Industry [ Vol.17, Issue 1 - Spring Year 2024]
  • Qurtubi.Qurtubi DPSIR Framework of Global Food Loss and Waste: Recommended Sustainable Intervention for Indonesia [ Vol.17, Issue 2 - Autumn Year 2024]

R

  • Rabani.Masoud A bi-objective mathematical model for the patient appointment scheduling problem in outpatient chemotherapy clinics using Fuzzy C-means clustering: A case study [ Vol.15, Issue 2 - Autumn Year 2022]
  • Rabani.Masoud A Multi-objective Mixed Model Two-sided Assembly Line Sequencing Problem in a Make –To- Order Environment with Customer Order Prioritization [ Vol.12, Issue 2 - Autumn Year 2019]
  • Rachmadi.Reza Multi-objective optimization of production: A case study on simplex, goal programming, and pareto front models [ Vol.16, Issue 2 - Autumn Year 2023]
  • radfar.reza A New Model Representation for Road Mapping in Emerging Sciences: A Case Study on Roadmap of Quantum Computing [ Vol.13, Issue 2 - Autumn Year 2020]
  • Rafiee.Majid Optimizing investment of pumped hydro storage system for renewable energy future [ Vol.16, Issue 1 - Spring Year 2023]
  • Raharja.Sapta Conceptual model to manage supply chain performance (case study: pangasius.sp agroindustry in indonesia) [ Vol.16, Issue 1 - Spring Year 2023]
  • Rahim.ZA Conceptual Framework for Implementing Bottom-Up Kaizen in the Malaysian Automotive Sector [ Vol.17, Issue 1 - Spring Year 2024]
  • Rahimi.Amir An Exact Algorithm for the Mode Identity Project Scheduling Problem [ Vol.5, Issue 10 - Spring Year 2012]
  • Rahimi.Masoumeh Analysis of Customer's Expectations and Satisfaction in the Zanjan Municipality Using Fuzzy Multi-Criteria Decision Making (FMCDM) Approach [ Vol.10, Issue 21 - Spring Year 2017]
  • Rahimi.Saeed Availability analysis of a cooking oil production line [ Vol.14, Issue 1 - Spring Year 2021]
  • Rahimikelarijani.Behnam A Mathematical Model for Multiple-Load AGVs in Tandem Layout [ Vol.13, Issue 1 - Spring Year 2020]
  • Rahmani.Morteza A Bi-Objective Airport Gate Scheduling with Controllable Processing Times Using Harmony Search and NSGA-II Algorithms [ Vol.11, Issue 1 - Spring Year 2018]
  • rahmaniani.ragheb A Simulated Annealing Algorithm within the Variable Neighbourhood Search Framework to Solve the Capacitated Facility Location-Allocation Problem [ Vol.5, Issue 10 - Spring Year 2012]
  • Rahmat.Azizah Implementation of Internet of Things in the Manufacturing Value Chain: A Comprehensive Study in Industry of Piping [ Vol.17, Issue 1 - Spring Year 2024]
  • Rahmati.Farhad A Mixed Integer Programming Formulation for the Heterogeneous Fixed Fleet Open Vehicle Routing Problem [ Vol.8, Issue 18 - Autumn Year 2015]
  • raiesdana.somayeh A Hybrid Method for Industrial Robot Navigation [ Vol.14, Issue 1 - Spring Year 2021]
  • Rajabi.Farshid Monitoring of Social Network and Change Detection by Applying Statistical Process: ERGM [ Vol.13, Issue 1 - Spring Year 2020]
  • rajabi.zahra Bi-objective Optimization of a Multi-product multi-period Fuzzy Possibilistic Capacitated Hub Covering Problem: NSGA-II and NRGA Solutions [ Vol.13, Issue 2 - Autumn Year 2020]
  • rajabzadeh.ali Residential appliance clustering based on their inherent characteristics for optimal use based K-means and hierarchical clustering method [ Vol.16, Issue 1 - Spring Year 2023]
  • Rajabzadeh.Morteza A mathematical programming model for single round-robin tournament problem: A case study of Volleyball Nations League [ Vol.15, Issue 2 - Autumn Year 2022]
  • Rakgomo.Kgalalelo Development and validation of an integer linear programming model for the lecturer-to-course assignment problem [ Vol.16, Issue 1 - Spring Year 2023]
  • Ramadhan.Ali Physical Exploration of Materials as a Method to Determine the Maximum Limit of the Attainment Shapes of Three-Ply Plywood [ Vol.16, Issue 2 - Autumn Year 2023]
  • Ramezanian.Reza An Integrated Bi-Objective Mathematical Model for Minimizing Take-off Delay and Passenger Dissatisfaction [ Vol.15, Issue 1 - Spring Year 2022]
  • Ramyar.Mohammad A New Bi-objective Mathematical Model to Optimize Reliability and Cost of Aggregate Production Planning System in a Paper and Wood Company [ Vol.13, Issue 1 - Spring Year 2020]
  • Rarasati.Ayomi Dita Agricultural Infrastructure Funding Assessment: Research Opportunities and Trends [ Vol.17, Issue 1 - Spring Year 2024]
  • Rashidi Komijan.Alireza An integrated crew scheduling problem considering reserve crew in air transportation: Ant colony optimization algorithm [ Vol.15, Issue 2 - Autumn Year 2022]
  • Rashidi Komijan.Alireza A New School Bus Routing Problem Considering Gender Separation, Special Students and Mix Loading: A Genetic Algorithm Approach [ Vol.14, Issue 2 - Autumn Year 2021]
  • rashidi.Hasan Scheduling in Container Terminals using Network Simplex Algorithm [ Vol.1, Issue 1 - Autumn Year 2008]
  • Rashidi.Hassan An Efficient Extension of Network Simplex Algorithm [ Vol.2, Issue 2 - Spring Year 2009]
  • Rashvand.Pooria Investigating the potential to improve the efficiency of iran's road bridge management system from the point of view of bridge maintenance experts [ Vol.16, Issue 1 - Spring Year 2023]
  • Rasti.Batul Bayesian Estimation of Shift Point in Shape Parameter of Inverse Gaussian Distribution Under Different Loss Functions [ Vol.8, Issue 18 - Autumn Year 2015]
  • Rattanawiboonsom.Vichayanan The survey of lean implementation maturity level of hospitals in Thailand: Does the hospital type matter? [ Vol.17, Issue 1 - Spring Year 2024]
  • Rauf.Nurhayati Analysis of the influence of price and product performance, on the decision of heavy equipment customer buying excavator products ABC PT. XYZ [ Vol.16, Issue 1 - Spring Year 2023]
  • Raza.Hamad Assessing the influence factors of audit fatigue and its impact on audit quality [ Vol.17, Issue 1 - Spring Year 2024]
  • Raza.Hamad Implementation of Internet of Things in the Manufacturing Value Chain: A Comprehensive Study in Industry of Piping [ Vol.17, Issue 1 - Spring Year 2024]
  • Raza.Hamad Agricultural Infrastructure Funding Assessment: Research Opportunities and Trends [ Vol.17, Issue 1 - Spring Year 2024]
  • Raza.Hamad Conceptual Framework for Implementing Bottom-Up Kaizen in the Malaysian Automotive Sector [ Vol.17, Issue 1 - Spring Year 2024]
  • Razak.Ruzanna Modelling Malaysia stock markets using GARCH, EGARCH and copula models [ Vol.15, Issue 2 - Autumn Year 2022]
  • Razali.Siti Soleha Occupational competency profile for workers in mechanical industry towards sustainable development [ Vol.16, Issue 1 - Spring Year 2023]
  • Razmi-Farooji.Arian A Comparison of NSGA II and MOSA for Solving Multi-depots Time-dependent Vehicle Routing Problem with Heterogeneous Fleet [ Vol.7, Issue 16 - Winter Year 2014]
  • Reyes.Aida 6 sigma and dmaic method: basic tool teaching and application for beginning practitioners in automotive assembly [ Vol.16, Issue 1 - Spring Year 2023]
  • Rezaei Zeynali.Fardin Evaluating the Performance of the Raw Material Providers based on the Customer-based LARG (CLARG) Paradigm: A Machine Learning-based Method [ Vol.17, Issue 2 - Autumn Year 2024]
  • Rezaei Zeynali.Fardin Designing A Sustainable Waste Chain Network for Banana Farm Under Uncertainty: A Case Study [ Vol.17, Issue 2 - Autumn Year 2024]
  • rezaei.hamid A Chance Constraint Approach to Multi Response Optimization Based on a Network Data Envelopment Analysis [ Vol.6, Issue 12 - Spring Year 2013]
  • Rezaeian.Javad Scheduling of a flexible flow shop with multiprocessor task by a hybrid approach based on genetic and imperialist competitive algorithms [ Vol.6, Issue 13 - Autumn Year 2013]
  • Rezaeian.Javad An Efficient Bi-objective Genetic Algorithm for the Single Batch-Processing Machine Scheduling Problem with Sequence Dependent Family Setup Time and Non-identical Job Sizes [ Vol.11, Issue 2 - Autumn Year 2018]
  • Rezaeian.Javad Designing an integrated production/distribution and inventory planning model of fixed-life perishable products [ Vol.9, Issue 19 - Spring Year 2016]
  • Rezaeian.Javad The Preemptive Just-in-time Scheduling Problem in a Flow Shop Scheduling System [ Vol.12, Issue 2 - Autumn Year 2019]
  • Rezaeian.Javad Meta heuristic for Minimizing Makespan in a Flow-line Manufacturing Cell with Sequence Dependent Family Setup Times [ Vol.7, Issue 16 - Winter Year 2014]
  • Rezaeian.Javad Developing a Permutation Method Using Tabu Search Algorithm: A Case Study of Ranking Some Countries of West Asia and North Africa Based on Important Development Criteria [ Vol.8, Issue 17 - Spring Year 2015]
  • Rezaie.Kamran Failure Mode and Effects Analysis Using Generalized Mixture Operators [ Vol.5, Issue 11 - Autumn Year 2012]
  • Robb.Charles Supply chain resilience and market performance amid COVID-19 disruptions: The role of relational capital and supply chain disruption orientation in South Korean firms [ Vol.16, Issue 2 - Autumn Year 2023]
  • Roghanian.Emad Assessing the impact of environmental aspects, land use, and R&D policies on peri-urban agriculture using a system dynamics approach [ Vol.15, Issue 2 - Autumn Year 2022]
  • Rohanai.Reyanhealme Occupational competency profile for workers in mechanical industry towards sustainable development [ Vol.16, Issue 1 - Spring Year 2023]
  • Rohani.Azmi Land Administrator Personal Competency Model Using Exploratory Factor Analysis [ Vol.15, Issue 2 - Autumn Year 2022]
  • ROMAN SALINAS.REINA VERONICA Industry 4.0- Applications of machine learning in the field of industrial engineering: Systematic review of the literature [ Vol.17, Issue 2 - Autumn Year 2024]
  • Rooeinfar.Ramin Three Hybrid Metaheuristic Algorithms for Stochastic Flexible Flow Shop Scheduling Problem with Preventive Maintenance and Budget Constraint [ Vol.12, Issue 2 - Autumn Year 2019]
  • rooeinfar.ramtin A New Hybrid Parallel Simulated Annealing Algorithm for Travelling Salesman Problem with Multiple Transporters [ Vol.7, Issue 15 - Autumn Year 2014]
  • roozmand.omid A Review of Three Decades Using Agent-Based Modelling and Simulation in Marketing and Consumer Behavior [ Vol.16, Issue 2 - Autumn Year 2023]
  • Roshdi.Israfil Complete Closest-Target Based Directional FDH Measures of Efficiency in DEA [ Vol.5, Issue 11 - Autumn Year 2012]
  • Rostami-Ranjbar.Babak A Scenario-Based Robust Compromise Programming Approach for Design of Bioethanol and Electricity Supply Chain in Iran [ Vol.15, Issue 2 - Autumn Year 2022]
  • Rouhani.Saeed Uncertainty Identification in Microblogs [ Vol.15, Issue 1 - Spring Year 2022]
  • Roy.Nirjhar Development of a novel lot sizing model with variable lead time in supply chain environment [ Vol.10, Issue 22 - Autumn Year 2017]
  • RUIZ HERNANDEZ.SANTOS Industry 4.0- Applications of machine learning in the field of industrial engineering: Systematic review of the literature [ Vol.17, Issue 2 - Autumn Year 2024]

S

  • Sa’don.Norazzlina A Web-based Consolidated Geotechnical Site Investigation (CoGSI) of Sarawak Soils [ Vol.15, Issue 1 - Spring Year 2022]
  • Saaednia.Hamidreza Optimal Use of Social Media From the Perspective of Brand Equity in Startups with a Data Approach [ Vol.13, Issue 2 - Autumn Year 2020]
  • Sabri-Laghaie.Kamyar Design of Accelerated Life Testing Plans for Products Exposed to Random Usage [ Vol.14, Issue 2 - Autumn Year 2021]
  • Sada.Samuel Optimization of the Ductile Properties of an Arc Welded Plate Based on the Yield Strength, Elongation and Modulus of Elasticity. [ Vol.14, Issue 1 - Spring Year 2021]
  • sadati.azam Operation Sequencing Optimization in CAPP Using Hybrid Teaching-Learning Based Optimization (HTLBO) [ Vol.13, Issue 1 - Spring Year 2020]
  • sadeghi.habibe A new approach to solving multi-follower multi-objective linear bilevel programming problems [ Vol.16, Issue 1 - Spring Year 2023]
  • Sadeghi.Saeed A Benders� Decomposition Approach for Dynamic Cellular Manufacturing System in the Presence of Unreliable Machines [ Vol.8, Issue 17 - Spring Year 2015]
  • Sadeghian.Ramin A new mathematical model for the closed-loop supply chains considering pricing for product, a fleet of heterogeneous vehicles, and inventory costs [ Vol.10, Issue 21 - Spring Year 2017]
  • Sadeqi-Arani.Zahra A Review of Three Decades Using Agent-Based Modelling and Simulation in Marketing and Consumer Behavior [ Vol.16, Issue 2 - Autumn Year 2023]
  • sadinejad.soheil Monitoring of Social Network and Change Detection by Applying Statistical Process: ERGM [ Vol.13, Issue 1 - Spring Year 2020]
  • Saeednia.Hamidreza Presenting a Model of Customer Experience Management in Mobile Banking Industry for Commercial Banks Customers in Dubai [ Vol.14, Issue 2 - Autumn Year 2021]
  • saeidi aghdam.mehran A system Dynamics Approach to Designing a Crowdfunding Model in Technological Entrepreneurship Ecosystem with a Focus on Technology Incubator Centers [ Vol.13, Issue 1 - Spring Year 2020]
  • Saemi.Saeed An integrated crew scheduling problem considering reserve crew in air transportation: Ant colony optimization algorithm [ Vol.15, Issue 2 - Autumn Year 2022]
  • Safaei.Abdul Sattar Monitoring process variability: a hybrid Taguchi loss and multiobjective genetic algorithm approach [ Vol.9, Issue 20 - Autumn Year 2016]
  • safaei.naser Failure Mode and Effect Analysis using Robust Data Envelopment Analysis (Case Study: Automobile Oil Filter) [ Vol.15, Issue 2 - Autumn Year 2022]
  • Safi Samghabadi.Azamdokht A New Dynamic Random Fuzzy DEA Model to Predict Performance of Decision Making Units [ Vol.9, Issue 20 - Autumn Year 2016]
  • saghaei.abas Monitoring of Social Network and Change Detection by Applying Statistical Process: ERGM [ Vol.13, Issue 1 - Spring Year 2020]
  • Sahebjamnia.Navid Optimization of Multi-period Three-echelon Citrus Supply Chain Problem [ Vol.13, Issue 1 - Spring Year 2020]
  • Sahraeian.Rashed Two-echelon Supply Chain Considering Multiple Retailers with Price and Promotional Effort Sensitive Non-linear Demand [ Vol.11, Issue 2 - Autumn Year 2018]
  • Saidi Mehrabad.Mohammad New Heuristic Algorithm for Flow Shop Scheduling with 3 Machines and 2 Robots Considering the Breakdown Interval of Machines and Robots Simultaneously [ Vol.10, Issue 21 - Spring Year 2017]
  • Saidi-Mehrabad.Mohammad A Scenario-Based Robust Compromise Programming Approach for Design of Bioethanol and Electricity Supply Chain in Iran [ Vol.15, Issue 2 - Autumn Year 2022]
  • Saidi-Mehrabad.Mohammad A Benders� Decomposition Approach for Dynamic Cellular Manufacturing System in the Presence of Unreliable Machines [ Vol.8, Issue 17 - Spring Year 2015]
  • Saidi-Mehrabad.Mohammad Developing a Multi-objective Mathematical Model for Dynamic Cellular Manufacturing Systems [ Vol.4, Issue 7 - Spring Year 2011]
  • Saidi-Mehrabad.Mohammad Monte Carlo Simulation to Compare Markovian and Neural Network Models for Reliability Assessment in Multiple AGV Manufacturing System [ Vol.9, Issue 19 - Spring Year 2016]
  • Saidi-Mehrabad.Mohammad Design of a Hybrid Genetic Algorithm for Parallel Machines Scheduling to Minimize Job Tardiness and Machine Deteriorating Costs with Deteriorating Jobs in a Batched Delivery System [ Vol.11, Issue 1 - Spring Year 2018]
  • Saidi-Mehrabad.Mohammad A Mathematical Model for Multiple-Load AGVs in Tandem Layout [ Vol.13, Issue 1 - Spring Year 2020]
  • Saidi-Mehrabad.Mohammad A Two-dimensional Warranty Model with Consideration of Customer and Manufacturer Objectives Solved with Non-dominated Sorting Genetic Algorithm [ Vol.12, Issue 1 - Spring Year 2019]
  • salahi.fariba Providing a multi-objective sustainable distribution network of agricultural items considering uncertainty and time window using meta-heuristic algorithms [ Vol.17, Issue 1 - Spring Year 2024]
  • Salehi.Abbas Participative Biogeography-Based Optimization [ Vol.12, Issue 1 - Spring Year 2019]
  • Salehzadeh.Ali Multi-objective Optimization of Blood Supply Network Using the Meta-Heuristic Algorithms [ Vol.17, Issue 2 - Autumn Year 2024]
  • Saligheh Rad.Hamidreza A New Method for Diagnosing Patients Suspected of Bone Marrow Metastasis in the Presence of Outliers [ Vol.15, Issue 1 - Spring Year 2022]
  • Salimi.Mostafa Modeling and Solution Procedure for a Preemptive Multi-Objective Multi-Mode Project Scheduling Model in Resource Investment Problems [ Vol.11, Issue 1 - Spring Year 2018]
  • Salmanzadeh.Hamed The Effects of Grasp Conditions on Maximal Acceptable Combined Forces (pushing and pinch forces) for Manual Insertion of Snap Fasteners [ Vol.7, Issue 15 - Autumn Year 2014]
  • Samadi.Mahmoud Optimal Localization of Shopping Centers Using Metaheuristic Genetic Algorithm [ Vol.13, Issue 1 - Spring Year 2020]
  • Samadi.Mahmoud Neurological Analysis of Consumer Behavior in Shopping Malls Using EEG [ Vol.9, Issue 20 - Autumn Year 2016]
  • Samouei.Parvaneh A Multi-Objective Particle Swarm Optimization for Mixed-Model Assembly Line Balancing with Different Skilled Workers [ Vol.9, Issue 20 - Autumn Year 2016]
  • Samouei.Parvaneh Humanitarian Smart Supply Chain: Classification and New Trends for Future Research [ Vol.16, Issue 2 - Autumn Year 2023]
  • Saputra.Edwin Optimizing Biomass Synergy: Cost-Effective Reduction of Carbon Footprint in Coal-Fired Power Plants [ Vol.16, Issue 2 - Autumn Year 2023]
  • sarafizadeh qazvini.asghar A system Dynamics Approach to Designing a Crowdfunding Model in Technological Entrepreneurship Ecosystem with a Focus on Technology Incubator Centers [ Vol.13, Issue 1 - Spring Year 2020]
  • Sarrafha.Keyvan A multi-objective evolutionary approach for integrated production-distribution planning problem in a supply chain network [ Vol.7, Issue 14 - Spring Year 2014]
  • Sayyadi tooranloo.Hossein Analysis of Causal Relationships Effective Factors on the Green Supplier Selection in Health Centers Using the Intuitionistic Fuzzy Cognitive Map (IFCM) Method [ Vol.15, Issue 1 - Spring Year 2022]
  • Sazvar.Zeinab An Innovation Measurement Model Based on THIO Classification: An Automotive Case Study [ Vol.11, Issue 2 - Autumn Year 2018]
  • Seboni.Lone Development and validation of an integer linear programming model for the lecturer-to-course assignment problem [ Vol.16, Issue 1 - Spring Year 2023]
  • Sedaghat.Ahmad Implementing Bounded Linear Programming and Analytical Network Process Fuzzy Models to Motivate Employees: a Case Study [ Vol.11, Issue 2 - Autumn Year 2018]
  • Sedighi.Abdolhossein A cost-oriented model for multi-manned assembly line balancing problem [ Vol.6, Issue 13 - Autumn Year 2013]
  • Sedighpour.Mohammad An Effective Genetic Algorithm for Solving the Multiple Traveling Salesman Problem [ Vol.4, Issue 8 - Summer Year 2011]
  • seidgar.hani Scheduling of a flexible flow shop with multiprocessor task by a hybrid approach based on genetic and imperialist competitive algorithms [ Vol.6, Issue 13 - Autumn Year 2013]
  • Seif Barghy.Mehdi Diabetes detection via machine learning using four implemented spanning tree algorithms [ Vol.17, Issue 1 - Spring Year 2024]
  • seif.azadeh Application of Fuzzy Analytical Hierarchy Process and Quality Function Deployment Techniques for Supplier's Assessment [ Vol.13, Issue 2 - Autumn Year 2020]
  • Seifbarghy.Mehdi A Supplier Selection Model for Social Responsible Supply Chain [ Vol.4, Issue 8 - Summer Year 2011]
  • Seifbarghy.Mehdi Determination of Material Flows in a Multi-echelon Assembly Supply Chain [ Vol.5, Issue 11 - Autumn Year 2012]
  • Seifbarghy.Mehdi Estimation of the cost function of a two-echelon inventory system with lost sales using regression [ Vol.1, Issue 1 - Autumn Year 2008]
  • Seifbarghy.Mehdi A Risk-averse Inventory-based Supply Chain Protection Problem with Adapted Stochastic Measures under Intentional Facility Disruptions: Decomposition and Hybrid Algorithms [ Vol.13, Issue 2 - Autumn Year 2020]
  • Seifbarghy.Mehdi Hub Covering Location Problem Considering Queuing and Capacity Constraints [ Vol.11, Issue 1 - Spring Year 2018]
  • Seifbarghy.Mehdi Maximal Benefit Location Problem for A Congested System [ Vol.3, Issue 5 - Spring Year 2010]
  • Sekeroglu.Boran Short-Term Tuberculosis Incidence Rate Prediction for Europe using Machine learning Algorithms [ Vol.16, Issue 2 - Autumn Year 2023]
  • Sepehri.Mehran Developing a Framework for Analyzing the Causes of Corruption [ Vol.15, Issue 1 - Spring Year 2022]
  • SETIAWATI.MARLA A Dynamics Approach for Maturity Assessment of Hospital Supply Chain Management [ Vol.17, Issue 1 - Spring Year 2024]
  • Settoul.Samir A New Optimization Algorithm for Optimal Wind Turbine Location Problem in Constantine City Electric Distribution Network Based Active Power Loss Reduction [ Vol.14, Issue 2 - Autumn Year 2021]
  • Seyedghasemi.Seyedreza Designing Tolerance of Assembled Components Using Weibull Distribution [ Vol.12, Issue 2 - Autumn Year 2019]
  • Shadloo.Naeimeh A Hybrid Grey based Two Steps Clustering and Firefly Algorithm for Portfolio Selection [ Vol.10, Issue 22 - Autumn Year 2017]
  • Shadrokh.Shahram The preemptive resource-constrained project scheduling problem subject to due dates and preemption penalties: An integer programming approach [ Vol.1, Issue 1 - Autumn Year 2008]
  • shaghaghi.mahdi Failure Mode and Effects Analysis Using Generalized Mixture Operators [ Vol.5, Issue 11 - Autumn Year 2012]
  • shahanaghi.kamran A Novel Model for the Analysis of Interactions Between Governments and Agricultures in a Study of Social Beneficial Externalities Based on the Stackelberg Game: A Case Study on Cotton Production [ Vol.11, Issue 2 - Autumn Year 2018]
  • shahhoseini.alireza Hybrid Techniques of Multi-Criteria Decision-Making for Location of Automated Teller Machines (ATMs): Shahr Bank Branches in Tehran, 1st District Municipality [ Vol.11, Issue 2 - Autumn Year 2018]
  • Shahrabi.Fatemeh Vehicle routing problem with cross-docking in a sustainable supply chain for perishable products [ Vol.17, Issue 2 - Autumn Year 2024]
  • shahrabi.mahmood A New Method for Diagnosing Patients Suspected of Bone Marrow Metastasis in the Presence of Outliers [ Vol.15, Issue 1 - Spring Year 2022]
  • Shahravi.Shima Multi-response Optimization of Grooved Circular Tubes Filled with Polyurethane Foam as Energy Absorber [ Vol.12, Issue 1 - Spring Year 2019]
  • Shahriari.Mohammadreza Classifying the Customers of Telecommunication Company in order to Identify Profitable Customers Based on Their First Transaction, Using Decision Tree: A Case Study of System 780 [ Vol.12, Issue 2 - Autumn Year 2019]
  • Shahriari.Mohammadreza Agile Supplier Selection In Sanitation Supply Chain Using Fuzzy VIKOR Method [ Vol.10, Issue 21 - Spring Year 2017]
  • Shakiba Tabar.Shaghayegh Investigating the Impact of Word of Mouth Advertising on Customer Experience Management in the Dental Equipment Industry Using Fuzzy Analytic Hierarchy Process [ Vol.15, Issue 2 - Autumn Year 2022]
  • Sharafi.Arghavan Green Vehicle Routing Problem with Safety and Social Concerns [ Vol.10, Issue 21 - Spring Year 2017]
  • Sharayei.Abolghasem A New Model Representation for Road Mapping in Emerging Sciences: A Case Study on Roadmap of Quantum Computing [ Vol.13, Issue 2 - Autumn Year 2020]
  • sharifi.mani Genetic Algorithm and Simulated Annealing for Redundancy Allocation Problem with Cold-standby Strategy [ Vol.4, Issue 8 - Summer Year 2011]
  • sharifi.mani Using NSGA II Algorithm for a Three Objectives Redundancy Allocation Problem with k-out-of-n Sub-Systems [ Vol.9, Issue 19 - Spring Year 2016]
  • sharifi.mani Comparing Parallel Simulated Annealing, Parallel Vibrating Damp Optimization and Genetic Algorithm for Joint Redundancy-Availability Problems in a Series-Parallel System with Multi-State Components [ Vol.7, Issue 14 - Spring Year 2014]
  • sharifi.mani A Neural Network Model Based on Support Vector Machine for Conceptual Cost Estimation in Construction Projects [ Vol.5, Issue 10 - Spring Year 2012]
  • sharifi.mani Hybrid Meta-heuristic Algorithm for Task Assignment Problem [ Vol.4, Issue 7 - Spring Year 2011]
  • sharifi.mani Reliability Modelling of the Redundancy Allocation Problem in the Series-parallel Systems and Determining the System Optimal Parameters [ Vol.8, Issue 17 - Spring Year 2015]
  • Shavandi.Hassan The Capacitated Location-Allocation Problem with Interval Parameters [ Vol.2, Issue 2 - Spring Year 2009]
  • Shavandi.Hassan Analysing Price, Quality and Lead Time Decisions with the Hybrid Solution Method of Fuzzy Logic and Genetic Algorithm [ Vol.5, Issue 10 - Spring Year 2012]
  • sheikh Sajadieh.Mohsen Optimal Manufacturer-Retailer Policies in a Supply Chain with Defective Product and Price Dependent Demand [ Vol.9, Issue 19 - Spring Year 2016]
  • sheikh Sajadieh.Mohsen A Robust Optimization Approach for the Hub Arc Location Problem [ Vol.17, Issue 1 - Spring Year 2024]
  • Sheikh.Usman Electricity theft detection in Power utilities using Bagged CHAID-Based classification Trees [ Vol.15, Issue 2 - Autumn Year 2022]
  • Shiang.Cheah Modelling of Crowd Evacuation with Communication Strategy using Social Force Model [ Vol.15, Issue 1 - Spring Year 2022]
  • Shirouyehzad.Hadi Optimizing Outsourcing Decisions in the Service Sectors and Businesses: A Comprehensive DSS Model for Effective Ranking and Selection [ Vol.17, Issue 1 - Spring Year 2024]
  • Shirouyehzad.Hadi A Strategic and Operational Framework for Pre-Disaster Management Considering Sustainability, Resilience, and Smart City Using Multi-Criteria Decision-Making and Mathematical Optimization [ Vol.17, Issue 2 - Autumn Year 2024]
  • shojaei.arsalan Developing and solving the multi-objective flexible and sustainable job shop scheduling problem with reverse flow and job rotation considerations in uncertain situations [ Vol.16, Issue 2 - Autumn Year 2023]
  • Shokoufi.Keyvan Designing an integrated production/distribution and inventory planning model of fixed-life perishable products [ Vol.9, Issue 19 - Spring Year 2016]
  • Shokoufi.Keyvan Developing a Permutation Method Using Tabu Search Algorithm: A Case Study of Ranking Some Countries of West Asia and North Africa Based on Important Development Criteria [ Vol.8, Issue 17 - Spring Year 2015]
  • Shults.Svitlana Economic Growth of Regions of Ukraine in Conditions of Disproportional Regional Development [ Vol.15, Issue 1 - Spring Year 2022]
  • Sidek.Abd. Rahim Types of welding process and relationship with defective rate in structural fabrication for oil & gas project [ Vol.16, Issue 1 - Spring Year 2023]
  • Simkiv.Liliia Economic Growth of Regions of Ukraine in Conditions of Disproportional Regional Development [ Vol.15, Issue 1 - Spring Year 2022]
  • Simsar.Shima Residential appliance clustering based on their inherent characteristics for optimal use based K-means and hierarchical clustering method [ Vol.16, Issue 1 - Spring Year 2023]
  • SINGH.VIJAY Stochastic analysis of k-out-of-n: G Type of Repairable system in Combination of Subsystems with Controllers and Multi Repair Approach [ Vol.15, Issue 1 - Spring Year 2022]
  • Slobodianyk.Anna Marketing Aspects of the Key Issues of Agricultural Machinery in the Industrial Enterprises [ Vol.15, Issue 1 - Spring Year 2022]
  • Smarandache.Florentin On characterizing efficient and properly efficient solutions for multi- objective programming problems in a complex space [ Vol.16, Issue 2 - Autumn Year 2023]
  • Sobhanallahi.Mohammad Ali An Aggregated Supplier Selection Method Based on QFD and TOPSIS (Case Study: A Financial Institution) [ Vol.12, Issue 1 - Spring Year 2019]
  • Sodagari.Nadieh A Benders Decomposition Method to Solve an Integrated Logistics Network Designing Problem with Multiple Capacities [ Vol.8, Issue 18 - Autumn Year 2015]
  • SojoudiZadeh.Reza Sizing optimization of truss structures with discrete design variables using combined PSO algorithm with Special Particles Method [ Vol.16, Issue 2 - Autumn Year 2023]
  • Soleimani.hamed An Ant Colony approach to forward-reverse logistics network design under demand certainty [ Vol.10, Issue 22 - Autumn Year 2017]
  • Soleimani.hamed An Innovation Measurement Model Based on THIO Classification: An Automotive Case Study [ Vol.11, Issue 2 - Autumn Year 2018]
  • Soltan Karimi.Sepideh Hub Covering Location Problem Considering Queuing and Capacity Constraints [ Vol.11, Issue 1 - Spring Year 2018]
  • Soltani.Roya Availability analysis of a cooking oil production line [ Vol.14, Issue 1 - Spring Year 2021]
  • SOUAINI. Sara Artificial Bee Colony to Solve the Berth Allocation and Crane Assignment Problem [ Vol.17, Issue 2 - Autumn Year 2024]
  • soufi.mansour Multi-objective Optimization of Blood Supply Network Using the Meta-Heuristic Algorithms [ Vol.17, Issue 2 - Autumn Year 2024]
  • Stehnei.Marianna Evaluation of the Efficiency of the Housing and Utilities Sector and Management of its Investment Framework in Conditions of Authorities Decentralization [ Vol.15, Issue 1 - Spring Year 2022]
  • Stehnei.Marianna Development Trends and Regualtion Peculiarities of the Housing and Utility Sector in Terms of the Resource Efficiency [ Vol.15, Issue 1 - Spring Year 2022]
  • Stephens.Aaron Supply chain resilience and market performance amid COVID-19 disruptions: The role of relational capital and supply chain disruption orientation in South Korean firms [ Vol.16, Issue 2 - Autumn Year 2023]
  • Subari.Khairanum The barriers and critical success factor for implementing lean manufacturing at SMEs [ Vol.16, Issue 1 - Spring Year 2023]
  • Subari.Khairanum Types of welding process and relationship with defective rate in structural fabrication for oil & gas project [ Vol.16, Issue 1 - Spring Year 2023]
  • Subari.Khairanum Critical success factors for implementation of quality improvement initiative [ Vol.16, Issue 1 - Spring Year 2023]
  • Subari.Khairanum The impact of work from home on productivity among manufacturing industry workers during MCO [ Vol.16, Issue 1 - Spring Year 2023]
  • Sudiarso.Andi Factor Analysis of SME Owner Intention to Join Collaborative Manufacturing Networks Using Structural Equation Modeling [ Vol.17, Issue 2 - Autumn Year 2024]
  • Sugarindra.Muchamad Storage Zone Functions Optimization in Warehouses: A Systematic Review of Class-Based Storage [ Vol.16, Issue 2 - Autumn Year 2023]
  • Sugianto.Welly Analysis of Factors that Influence Automobile Workshop Queue Performance Using Design of Experiments [ Vol.16, Issue 2 - Autumn Year 2023]
  • Suhaili.Shamsiah binti Throughput Improvement of RIPEMD-160 Design using Unfolding Transformation Technique [ Vol.15, Issue 1 - Spring Year 2022]
  • Suratman.Robiah Land Administrator Personal Competency Model Using Exploratory Factor Analysis [ Vol.15, Issue 2 - Autumn Year 2022]
  • Suryo.Ibnu Determining The Relationship Between Adoption Factors of P3 Sweetener through Partial Least Squares Structural Equation Modeling Approach [ Vol.15, Issue 2 - Autumn Year 2022]
  • Suyanto.M The Influence of Logistics Performance on Company Performance in the Small and Medium Industry [ Vol.17, Issue 1 - Spring Year 2024]

T

  • Tagizadieh.Naser Hybrid Teaching-Learning-Based Optimization and Harmony Search for Optimum Design of Space Trusses [ Vol.13, Issue 1 - Spring Year 2020]
  • Taherinezhad.Ali Organizational Competitive Advantage Analysis using SWOT Matrix and Hybrid Approach of Fuzzy-DEMATEL, ANP, and DEA [ Vol.17, Issue 1 - Spring Year 2024]
  • Taherkhani.Mehrnoosh Determination of Material Flows in a Multi-echelon Assembly Supply Chain [ Vol.5, Issue 11 - Autumn Year 2012]
  • Tajally.AmirReza Designing A Sustainable Waste Chain Network for Banana Farm Under Uncertainty: A Case Study [ Vol.17, Issue 2 - Autumn Year 2024]
  • Talaat ahari.siamak Hybrid Teaching-Learning-Based Optimization and Harmony Search for Optimum Design of Space Trusses [ Vol.13, Issue 1 - Spring Year 2020]
  • Talebi Khameneh.Ramin Evaluating the Performance of the Raw Material Providers based on the Customer-based LARG (CLARG) Paradigm: A Machine Learning-based Method [ Vol.17, Issue 2 - Autumn Year 2024]
  • Taleghani.Mohammad A Dynamic Model for Assessing the Sustainability of Small and Medium Sized Enterprises [ Vol.17, Issue 2 - Autumn Year 2024]
  • Talib.Saadia Work-related stress and psychosocial problems among shift workers: a case study on pakistan railway Lahore, pakistan [ Vol.16, Issue 1 - Spring Year 2023]
  • Taraghi.Vahid A Combined Fuzzy Logic and Analytical Hierarchy Process Method for Optimal Selection and Locating of Pedestrian Crosswalks [ Vol.11, Issue 2 - Autumn Year 2018]
  • Tarokh.Jafar Integrating AHP and data mining for effective retailer segmentation based on retailer lifetime value [ Vol.5, Issue 11 - Autumn Year 2012]
  • Tarokh.Jafar Hybrid Meta-heuristic Algorithm for Task Assignment Problem [ Vol.4, Issue 7 - Spring Year 2011]
  • Tarokh.Jafar Using Electromagnetism Algorithm for Determining the Number of kanbans in a Multi-stage Supply Chain System [ Vol.3, Issue 6 - Autumn Year 2010]
  • Tavakkoli-Moghaddam.Reza Planning for Medical Emergency Transportation Vehicles during Natural Disasters [ Vol.13, Issue 2 - Autumn Year 2020]
  • Tavakkoli-Moghaddam.Reza Solving a Multi-Item Supply Chain Network Problem by Three Meta-heuristic Algorithms [ Vol.14, Issue 2 - Autumn Year 2021]
  • Tavakkoli-Moghaddam.Reza Controlling the Bullwhip Effect in a Supply Chain Network with an Inventory Replenishment Policy by a Robust Control Method [ Vol.7, Issue 16 - Winter Year 2014]
  • Tavakkoli-Moghaddam.Reza A Stochastic Optimization Approach to a Location-Allocation Problem of Organ Transplant Centers [ Vol.11, Issue 1 - Spring Year 2018]
  • Tavakkoli-Moghaddam.Reza An Integrated Approach for Facility Location and Supply Vessel Planning with Time Windows [ Vol.12, Issue 1 - Spring Year 2019]
  • Tavakkoli-Moghaddam.Reza A simulated annealing algorithm to determine a group layout and production plan in a dynamic cellular manufacturing system [ Vol.7, Issue 14 - Spring Year 2014]
  • Tavakkoli-Moghaddam.Reza An integrated crew scheduling problem considering reserve crew in air transportation: Ant colony optimization algorithm [ Vol.15, Issue 2 - Autumn Year 2022]
  • Tavakkoli-Moghaddam.Reza Fuzzy Particle Swarm Optimization Algorithm for a Supplier Clustering Problem [ Vol.1, Issue 1 - Autumn Year 2008]
  • Tavakol.Parvaneh A dynamics approach for modeling inventory fluctuations of the pharmaceutical supply chain in covid 19 pandemic [ Vol.16, Issue 1 - Spring Year 2023]
  • Tayyebi.Hamed A Hybrid Unconscious Search Algorithm for Mixed-model Assembly Line Balancing Problem with SDST, Parallel Workstation and Learning Effect [ Vol.13, Issue 2 - Autumn Year 2020]
  • tehrani.reza Using the Hybrid Model for Credit Scoring (Case Study: Credit Clients of microloans, Bank Refah-Kargeran of Zanjan, Iran) [ Vol.12, Issue 2 - Autumn Year 2019]
  • Tesfaye.Dr. Gezahegn A TQM and JIT Integrated Continuous Improvement Model For Organizational Success: An Innovative Framework [ Vol.10, Issue 22 - Autumn Year 2017]
  • teshnehlab.mohammad EMCSO: An Elitist Multi-Objective Cat Swarm Optimization [ Vol.11, Issue 2 - Autumn Year 2018]
  • Teshnehlab.Mohammad EMCSO: An Elitist Multi-Objective Cat Swarm Optimization [ Vol.11, Issue 2 - Autumn Year 2018]
  • Tiolina.Tiolina Application of Business Intelligent System in the Realm of Knowledge Distribution to Employees [ Vol.16, Issue 2 - Autumn Year 2023]
  • tohidi.amine Classification of Streaming Fuzzy DEA Using Self-Organizing Map [ Vol.12, Issue 1 - Spring Year 2019]
  • Toloie Ashlaghi.Abbas A combined Model design for developing and optimizing product platform architecture considering parameters of DFV, DFC, DFSC, and DFAv, case study: phased array radar [ Vol.16, Issue 2 - Autumn Year 2023]
  • Toloie Ashlaghi.Abbas Providing a multi-objective sustainable distribution network of agricultural items considering uncertainty and time window using meta-heuristic algorithms [ Vol.17, Issue 1 - Spring Year 2024]
  • Topchiy.Alexei Development Trends and Regualtion Peculiarities of the Housing and Utility Sector in Terms of the Resource Efficiency [ Vol.15, Issue 1 - Spring Year 2022]
  • Topchiy.Alexei Evaluation of the Efficiency of the Housing and Utilities Sector and Management of its Investment Framework in Conditions of Authorities Decentralization [ Vol.15, Issue 1 - Spring Year 2022]
  • Tsang.Edward P.K An Efficient Extension of Network Simplex Algorithm [ Vol.2, Issue 2 - Spring Year 2009]

V

  • Vaezi.Ehsan Measuring the performances of Medical Diagnostic Laboratories based on interval efficiencies [ Vol.14, Issue 2 - Autumn Year 2021]
  • Vafaeesefat.abbas Optimization of Plastic Injection Molding Process by Combination of Artificial Neural Network and Genetic Algorithm [ Vol.6, Issue 13 - Autumn Year 2013]
  • Valipour.Hashem Relationship between Business Intelligence Components and Financial Reporting Quality in Firms [ Vol.14, Issue 2 - Autumn Year 2021]
  • Van Der Meer.Robert The survey of lean implementation maturity level of hospitals in Thailand: Does the hospital type matter? [ Vol.17, Issue 1 - Spring Year 2024]
  • varmaghani.mohammad Outsourcing or Insourcing of Transportation System Evaluation Using Intelligent Agents Approach [ Vol.3, Issue 5 - Spring Year 2010]
  • Velayati.mohammad Classifying the Customers of Telecommunication Company in order to Identify Profitable Customers Based on Their First Transaction, Using Decision Tree: A Case Study of System 780 [ Vol.12, Issue 2 - Autumn Year 2019]
  • Vovk.Viktoriia Innovative Instruments and Legal Mechanisms of Bank Capitalization: National Features and World Trends [ Vol.14, Issue 3 - Summer Year 2021]
  • Vyshnevska.Olga The Influence of Globalization Processes on Forecasting the Activities of Market Entities [ Vol.15, Issue 1 - Spring Year 2022]

W

  • W.T. Lim.Stanley Frederick A New Mathematical Model for the Green Vehicle Routing Problem by Considering a Bi-Fuel Mixed Vehicle Fleet [ Vol.13, Issue 2 - Autumn Year 2020]
  • Watanabe.Takahiro Throughput Improvement of RIPEMD-160 Design using Unfolding Transformation Technique [ Vol.15, Issue 1 - Spring Year 2022]
  • Wibisono.Chablullah Determination of Motivation, Work Environment, and Work Communication on Performance Through Competence at the Public Health Centers in Batam City [ Vol.16, Issue 2 - Autumn Year 2023]
  • Wibowo.Lili Dimensions of Market-Sensing Capability Identifying SMEs Created: A Systematic Literature Review [ Vol.16, Issue 2 - Autumn Year 2023]
  • Widodo.Imam Djati DPSIR Framework of Global Food Loss and Waste: Recommended Sustainable Intervention for Indonesia [ Vol.17, Issue 2 - Autumn Year 2024]
  • Workalemayehu.Robile Analytical Modeling of Specific Energy Consumption and Cost Share in Comprehensive Textile Industry: Case Study of Ethiopia [ Vol.13, Issue 2 - Autumn Year 2020]

Y

  • yaghoby.surur Solving Bi-objective Model of Hotel Revenue Management Considering Customer Choice Behavior Using Meta-heuristic Algorithms [ Vol.14, Issue 1 - Spring Year 2021]
  • Yaghoubi.Afshin Exact equations for the reliability and mean time to failure of 1-out-of-n cold-standby system with imperfect switching [ Vol.14, Issue 2 - Autumn Year 2021]
  • Yaghoubi.Afshin Availability analysis of a cooking oil production line [ Vol.14, Issue 1 - Spring Year 2021]
  • Yaghoubi.Ali A New Dynamic Random Fuzzy DEA Model to Predict Performance of Decision Making Units [ Vol.9, Issue 20 - Autumn Year 2016]
  • Yahaya Maipan-uku.Jamilu Short-Term Tuberculosis Incidence Rate Prediction for Europe using Machine learning Algorithms [ Vol.16, Issue 2 - Autumn Year 2023]
  • Yahaya.Siti Norbaya Absorptive Capacity Effects on the Relationship between Foreign Direct Investment and Economic Growth in Malaysia [ Vol.16, Issue 2 - Autumn Year 2023]
  • yahyazade.yalda Developing a Risk Management Model for Banking Software Development Projects Based on Fuzzy Inference System [ Vol.13, Issue 2 - Autumn Year 2020]
  • Yanti.Roaida DPSIR Framework of Global Food Loss and Waste: Recommended Sustainable Intervention for Indonesia [ Vol.17, Issue 2 - Autumn Year 2024]
  • Yavari.Saleh Machine scheduling for multitask machining [ Vol.13, Issue 2 - Autumn Year 2020]
  • Yazdanpanah.Amir Hossein A Game Theoretical Approach to Optimize Policies of Government Under the Cartel of Two Green and Non-green Supply Chains [ Vol.12, Issue 2 - Autumn Year 2019]
  • Yazdian Varjani.Ali Residential appliance clustering based on their inherent characteristics for optimal use based K-means and hierarchical clustering method [ Vol.16, Issue 1 - Spring Year 2023]
  • Yibeltal.Selam Service Performance Improvement Model: The Case of Teklehaymanot General Hospital [ Vol.11, Issue 1 - Spring Year 2018]
  • Yousefi Babadi.Abolghasem Cost Analysis of Acceptance Sampling Models Using Dynamic Programming and Bayesian Inference Considering Inspection Errors [ Vol.9, Issue 19 - Spring Year 2016]
  • yousefi.komeil Solving the Fixed Charge Transportation Problem by New Heuristic Approach [ Vol.12, Issue 1 - Spring Year 2019]
  • yousefi.mahdi Hybrid Techniques of Multi-Criteria Decision-Making for Location of Automated Teller Machines (ATMs): Shahr Bank Branches in Tehran, 1st District Municipality [ Vol.11, Issue 2 - Autumn Year 2018]
  • Yousefikhoshbakht.Majid Solving the Multiple Traveling Salesman Problem by a Novel Meta-heuristic Algorithm [ Vol.7, Issue 16 - Winter Year 2014]
  • Yousefikhoshbakht.Majid A Mixed Integer Programming Formulation for the Heterogeneous Fixed Fleet Open Vehicle Routing Problem [ Vol.8, Issue 18 - Autumn Year 2015]
  • Yousefikhoshbakht.Majid An Effective Genetic Algorithm for Solving the Multiple Traveling Salesman Problem [ Vol.4, Issue 8 - Summer Year 2011]
  • Yulyanda.Ade Analysis of the influence of price and product performance, on the decision of heavy equipment customer buying excavator products ABC PT. XYZ [ Vol.16, Issue 1 - Spring Year 2023]

Z

  • ZahediAnaraki.AmirHossien A Benders-Decomposition and Meta-Heuristic Algorithm for a Bi- Objective Stochastic Reliable Capacitated Facility Location Problem Not Dealing with Benders Feasibility-Cut Stage [ Vol.14, Issue 1 - Spring Year 2021]
  • Zahoretska.Olena Solution to “the Kuznets Riddle” [ Vol.14, Issue 3 - Summer Year 2021]
  • Zainal.Arizza Occupational competency profile for workers in mechanical industry towards sustainable development [ Vol.16, Issue 1 - Spring Year 2023]
  • Zaitsev.Oleksandr Determination of the Company's Value under the Influence of Various Factors [ Vol.14, Issue 3 - Summer Year 2021]
  • Zakharin.Sergii New Economic Instruments of State Regulation of Private Savings, Social Security and Pension Support [ Vol.14, Issue 3 - Summer Year 2021]
  • Zakharin.Sergii Strategic Management of the Investment Process in the Agricultural Sector (for Example, Agricultural Enterprises and the Food Industry) [ Vol.14, Issue 3 - Summer Year 2021]
  • zakizadeh.mohammadreza Profitability of Iranian Stock Market Based on Technical Analysis Trading Rules [ Vol.4, Issue 9 - Autumn Year 2011]
  • Zalutska.Khrystyna Strategic Management of the Innovative Activity of the Enterprise [ Vol.14, Issue 3 - Summer Year 2021]
  • Zalutska.Khrystyna The synchronicity of business processes is the basis of organizing the effective recovery of modern enterprises [ Vol.16, Issue 1 - Spring Year 2023]
  • zamami amlashi.zaman Sequencing Mixed Model Assembly Line Problem to Minimize Line Stoppages Cost by a Modified Simulated Annealing Algorithm Based on Cloud Theory [ Vol.4, Issue 8 - Summer Year 2011]
  • Zameni.Saeed Multimodal Transportation p-hub Location Routing Problem with Simultaneous Pick-ups and Deliveries [ Vol.8, Issue 17 - Spring Year 2015]
  • zandhessami.hessam A system Dynamics Approach to Designing a Crowdfunding Model in Technological Entrepreneurship Ecosystem with a Focus on Technology Incubator Centers [ Vol.13, Issue 1 - Spring Year 2020]
  • Zandieh.Mostafa Vendor Selection: An Enhanced Hybrid Fuzzy MCDM Model [ Vol.2, Issue 2 - Spring Year 2009]
  • Zanganeh.Maisam Studying and Identifying the Effective Factors on Tax Evasion by Fuzzy DEMATEL-Method [ Vol.11, Issue 2 - Autumn Year 2018]
  • Zare.amirreza A bi-objective mathematical model for the patient appointment scheduling problem in outpatient chemotherapy clinics using Fuzzy C-means clustering: A case study [ Vol.15, Issue 2 - Autumn Year 2022]
  • zarook.yaser An Efficient Bi-objective Genetic Algorithm for the Single Batch-Processing Machine Scheduling Problem with Sequence Dependent Family Setup Time and Non-identical Job Sizes [ Vol.11, Issue 2 - Autumn Year 2018]
  • Zeebaree.Mosleh A Weight-Analysis Technique of Existing Research on E-Government Implementation Challenges in Developing Countries [ Vol.14, Issue 3 - Summer Year 2021]
  • Zellagui.Mohamed A New Optimization Algorithm for Optimal Wind Turbine Location Problem in Constantine City Electric Distribution Network Based Active Power Loss Reduction [ Vol.14, Issue 2 - Autumn Year 2021]
  • Zendaoui.Fairouz Uncertainty Identification in Microblogs [ Vol.15, Issue 1 - Spring Year 2022]
  • Zendehdel Nobari.Neda An Aggregated Supplier Selection Method Based on QFD and TOPSIS (Case Study: A Financial Institution) [ Vol.12, Issue 1 - Spring Year 2019]
  • Zhavoronok.Artur Transformation of Household Credit Behavior in the Conditions of Digitalization of the Financial Services Market [ Vol.14, Issue 3 - Summer Year 2021]
  • Ziari.Matineh A Robust Optimization Approach for the Hub Arc Location Problem [ Vol.17, Issue 1 - Spring Year 2024]
  • Zohal.Mostafa An Ant Colony approach to forward-reverse logistics network design under demand certainty [ Vol.10, Issue 22 - Autumn Year 2017]
  • Zoraghi.Nima An Integrated Model of Project Scheduling and Material Ordering: A Hybrid Simulated Annealing and Genetic Algorithm [ Vol.5, Issue 10 - Spring Year 2012]

The rights to this website are owned by the Raimag Press Management System.
Copyright © 2021-2024

Home| Login| About Us| Contact Us|
[فارسی] [العربية] [fa] [ar]