The synchronicity of business processes is the basis of organizing the effective recovery of modern enterprises
Subject Areas :
1 - Department of Enterprise and Investment Economics, Lviv Polytechnic National University, Lviv, Ukraine,
Keywords: effectiveness, Business Process, Resource Efficiency, Integrational adaptiveness, Synchronicity,
Abstract :
Effective strategic development of modern enterprises is possible through the rapid formation, introduction and implementation of measures for resource conservation and waste minimization without reducing overall efficiency. The paper proves that achieving this goal is possible through the formation of a rationalized set of business processes at the enterprise, connected by a mutual resource base, which do not necessarily have to be profitable in the current year. To determine the level of rational implementation of business processes of the enterprise, it is proposed to use the coefficient of synchronization. It is substantiated that the use of the coefficient of synchronicity of business processes will facilitate the selection of the most useful business processes for the strategic development of the enterprise and the rejection of those that are not sufficiently attractive in terms of certain characteristics. The proposed recommendations were tested on a sample of machine-building enterprises. According to the results obtained, it was determined that for the effective development of the studied enterprises it is necessary: for some - to combine their efforts with the capabilities of other enterprises; for others - to rationalize the composition and structure of existing business processes and/or create conditions for the effective implementation of new business processes that will contribute to the production of products necessary to ensure an effective full cycle of production of the enterprise. The obtained results made it possible to form certain clusters of enterprises in accordance with the general scenario of their development, determined by the value of the synchrony coefficient. The author substantiates the choice of a certain direction of movement for each of these clusters. In addition, practical recommendations for the effective strategic development of enterprises of these clusters within the chosen direction through the optimal increase of the necessary capabilities are presented. Drawing on a national development strategy, government officials should enhance and use the indicated clusters for meeting needs of a particular region or a country in general.
Arasteh, A. (2022). Optimizing Inventory Management Costs in Supply Chains by Determining Safety Stock Placement. Journal of Optimization in Industrial Engineering,15, 1, 1-15. DOI:10.22094/JOIE.2021.1890937.1719.
Claudia Battilani, Gabriele Galli, Simone Arecco, Bruno Casarino, Antonella Granero, Karina Lavagna, RossanaVarna, MichelaVentura, Roberto Revetria & Lorenzo Damiani (2022). Business Process Re-engineering in Public Administration: The case study of Western Ligurian Sea Port Authority. Sustainable Futures, Available online 2 March 2022, 100065.
Eckert, J., Schulte, S., Repp, N., Berbner, R. & Steinmetz, R (2008).Queuing-based capacity planning approach for web service workflows using optimization algorithms. Digital Ecosystems and Technologies, 2008. DEST 2008, 2nd IEEE International Conference on, IEEE (2008), 313-318.
Gordeev, M., Borisov, A. & Korshak, N. How to optimize business processes: technology. Corporate practice. URL: http://www.executive.ru/management/practices/685191-kak-optimizirovat-biznes-protsessytehnologiya (accessed 22.03.2022).
Gurova, VO, Sadekova, AI (2016). Optimization of business processes at the enterprise in times of crisis. Ukrainian Journal of Applied Economics, Volume 1, № 1, 75-82.
Grishchenko, A. (2006). Lozova Forging and Mechanical Plant of Kharkiv Region has purchased compressor equipment made in the USA. Status Quo (Kharkov) of November 24, 2006.
Grishchenko, A. (2007). Lozovsky Forging and Mechanical Plant put into operation the air-plasma cutting machine "Kharkov P". Status Quo (Kharkov) of February 13, 2007.
Grishchenko, AV (2013). Lozova created the second largest harrow in Europe // "Status Quo" (Kharkov) from September 16, 2013.
Grishchenko, A. (2015). Lozova Forge and Mechanical Plant is setting up production of units for armored personnel carriers. Status Quo (Kharkov) of June 26, 2015.
Harrington, J., Esseling, K. C., & Nimwegen, H. W. (2002). Business process optimization. Documentation, analysis, management, optimization. СПб. : "Alphabet".
HermanVantrappen (1992). Creating customer value by streamlining business processes. Long Range Planning, 25 (1), 53-62.
Hector D. Perez, Satyajith Amaran, Esra Erisen, John M.Wassick & Ignacio E. Grossmann (2021). Optimization of extended business processes in digital supply chains using mathematical programming. Computers & Chemical Engineering, Volume 152, September 2021, 107323.
Heniey, H., G/Hiwot, K., Destaa, T., G/Hiwot, L. (2022). Optimization of Inventory Controlling System Using Integrated Seasonal Forecasting and Integer Programming. Journal of Optimization in Industrial Engineering, 15, 1, 57-66.
Lozova Forge and Mechanical Plant began production of hulls and bridges for armored personnel carriers. RBC-Ukraine of May 11, 2010.
Lozova Forging and Mechanical Plant will supply spare parts for the repair of armored vehicles in Kazakhstan. National industrial portal. URL: http://uprom.info/ (access date 22.03.2022).
Mikheenko, K. (2012). The impact of business process optimization on the capitalization of enterprises. URL: http://www.confcontact.com/ 2012_ 09_21 / 4_miheenko.htm (accessed March 22, 2022).
Nikolayev, A. (2001). Innovation development and innovative culture. Problems of Theory and Practice of Theory and Practice Management. URL: http://vasilievaa.narod.ru/9_5_01.htm (Accessed 16 February 2018) (дата звернення 22.03.2022).
Nahabedian, L., Braberman, V., D’Ippolito, N., Kramer, J. & Uchitel, S. (2022). Assured automatic dynamic reconfiguration of business processes. Information Systems, Volume 104, February 2022, 101850.
Pavlos Delias & Gia-Thi Nguyen (2021). Prototyping a business process improvement plan. An evidence-based approach. Information Systems, 101, November 2021, 101812.
Popova, M. How to bring the company out of crisis? Chief Financial Officer. URL: http://iteam.ru/publications/finances/section_43/article_2468 (accessed March 22, 2022).
Prokhorov, VV & Zalutskaya, H. Ya. (2020). Cross-functional business processes of the enterprise as the basis of the system of managerial innovation in the perspective of strategic development. Economic Bulletin of the Dnieper Polytechnic, 4 (72), 146-154.
Prokhorova, V.V., Zalutska, Kh.Ya. & Us, Yu.V. (2021). Formation of motivational mechanism in strategic management of a diversified enterprise. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 177–185.
Romanenkov, Yu. & Zeiniev, T. (2015). The task of the contour of strategic management of business process efficiency in the organization. Systems Research and Information Technology, №3, 43-47.
Ref Kharkiv Tractor Plant 2008. URL: http://xtz.ua/ua/ (access date 22.03.2022).
Rahmani, N., Najafi, A. (2020). Online Distribution and Load Balancing Optimization Using the Robin Hood and Johnson Hybrid Algorithm. Journal of Optimization in Industrial Engineering, 13, 2, 17-26. DOI:10.22094/JOIE.2020.560265.1542.
Shemaeva, LG, Bezgin, KS and others (2011). Quality management of business processes at the enterprise. Kharkiv: KhNEU Publishing House.
Sander Peters, Yoav Kerner, Remco Dijkman, Ivo Adan & Paul Grefen (2022). Fast and accurate quantitative business process analysis using feature complete queueing models. Information Systems, Volume 104, February 2022, 101892.
The website of Rise Manager articles (2018). Composition and features of development and commercialization business processes of innovations. URL: http://www.risemanager.ru/rims-676-1.html (Accessed 16 February 2018) (дата звернення 22.03.2022).
Tobias Fehrer, Dominik A. Fischer, Sander J.J. Leemans, Maximilian Röglinger & Moe T.Wynn (2022). An assisted approach to business process redesign. Decision Support Systems, Article number: 113749.
Tyagnenko, VV (2013). Optimization of business processes of the enterprise as a way of effective business in the conditions of world financial crisis. Current issues of economic sciences, №23, 217-222.
Tarasenko, S. (2006). Lozova Forging and Mechanical Plant received the status of an approved supplier of components for the Swedish concern "SKF" // "Status Quo" (Kharkov) of September 14, 2006.
Xie, Y., Chien, C.-F. & Tang, R.-Z (2016). A dynamic task assignment approach based on individual worklists for minimizing the cycle time of business processes. Comput. Ind. Eng., 99, 401-414.
Zalutska, Kh., Petrushka, К., Mishchyshyn, O. & Danilovich O. (2021). Strategic management of the innovative activity of the enterprise. Journal of Optimization in Industrial Engineering, 14(1), 119–127.
Zhenjie Zhang, Yuanming Zhang, Jiawei Lu, Fei Gao & Gang Xiao (2020). A novel complex manufacturing business process decomposition approach in cloud manufacturing. Computers & Industrial Engineering, Volume 144, June 2020, 106442.